Used Cormak Roll Bender for sale (8,167)

Year of construction: 1978, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1978 Specifications Metric US Standard Rolling width 3050 mm Rolling thickness 3x toproll Ø 60 mm Rolling thickness 5x toproll Ø 70 mm Rolling thickness prebending 50 mm Top Roll Ø 630 mm Bottom Roll Ø 600 mm Side roll Ø 500 mm Number of rolls 4 Rolling speed 0 - 5 Adjustiment lower roll 200 mm/min. Adjustment side rolls 200 mm/min. Number of driven rolls 2 Power 120 kW Gsdpjkvm S Njfx Ankoub Dimensions (Estimate) Length 5790 mm Width 4200 mm Height 4200 mm Weight 85000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Rolling width: 2050mm Rolling thickness 3x toproll Ø:18mm Rolling thickness 5x toproll Ø:21mm Guedewtpgtspfx Anksb Rolling thickness prebending: 12mm Top Roll Ø: 280mm Side roll Ø: 260mm Number of rolls: 3 Rolling speed: 0-5 Adjustiment lower roll: 0-150mm/min. Adjustment side rolls: 0-150mm/min. Top support: yes Power: 12kW Length: 3000mm Width: 1500mm Height: 1600mm Weight: 5200kg

Year of construction: 1980, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1980 Specifications Metric US Standard Rolling width 3000 mm Rolling thickness 3x toproll Ø 130 mm Rolling thickness 5x toproll Ø 140 mm Rolling thickness prebending 120 mm Top Roll Ø 950 mm Bottom Roll Ø 850 mm Side roll Ø 180 mm Number of rolls 4 Rolling speed 2 + 4 Adjustiment lower roll 0 - 400 mm/min. Adjustment side rolls 0 - 400 mm/min. Number of driven rolls 2 Power 132 + 37 kW Dimensions (Estimate) Length 12000 mm Width Gujdpfxskvm Szs Ankjb 5440 mm Height 5650 mm Weight 286000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1997, number of rollers: 4, roller (bottom) diameter: 280 mm, roller (top) diameter: 200 mm, side roll diameter: 280 mm, roller length: 3,000 mm, sheet thickness (max.): 6 mm, overall weight: 7,250 kg, total length: 6,000 mm, total width: 2,000 mm, total height: 2,000 mm, power: 6 kW (8.16 HP), 4 roll plate bender HAEUSLER - VRM-HY MACH-ID 9604 Make: HAEUSLER Type: VRM-HY Control: HAEUSLER CNC Guodpfx Aey Expujnksb Rolling width: 3000mm Rolling thickness 3x toproll Ø:4mm Rolling thickness 5x toproll Ø:6mm Rolling thickness prebending: 3mm Top Roll Ø: 200mm Bottom Roll Ø: 280mm Side roll Ø: 280mm Number of rolls: 4 Rolling speed: 0-5 Adjustiment lower roll: 0-200mm/min. Adjustment side rolls: 0-200mm/min. Number of driven rolls: 2 Power: 6kW Length: 6000mm Width: 2000mm Height: 2000mm Weight: 7250kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2004, control type: CNC control, controller model: Siemens, number of rollers: 4, roller (top) diameter: 12 mm, side roll diameter: 14 mm, working width: 3,100 mm, sheet thickness (max.): 14 mm, overall weight: 12,000 kg, total length: 5,000 mm, total width: 1,900 mm, total height: 3,900 mm, 4 roll plate bender HAEUSLER - VRM-HY 3000 x 14 MACH-ID 9611 Guedpoy H A Uqjfx Ankjb Make: HAEUSLER Type: VRM-HY 3000 x 14 Control: Siemens Rolling width: 3100mm Rolling thickness 3x toproll Ø:12mm Rolling thickness 5x toproll Ø:14mm Rolling thickness prebending: 10mm Number of rolls: 4 Rolling speed: 0-5 Top support: yes Length: 5000mm Width: 1900mm Height: 3900mm Weight: 12000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1991, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1991 Guodpfx Anekwcc Noksb Specifications Metric US Standard Rolling width 3000 mm Rolling thickness 3x toproll Ø 120 mm Rolling thickness 5x toproll Ø 150 mm Rolling thickness prebending 100 mm Top Roll Ø 910 + 820 + 740 mm Bottom Roll Ø 940 mm Side roll Ø 780 mm Number of rolls 4 Rolling speed 2 + 4 Adjustiment lower roll 200 mm/min. Adjustment side rolls 500 mm/min. Number of driven rolls 2 Power 300 kW Dimensions (Estimate) Length 8000 mm Width 5400 mm Height 5400 mm Weight 290000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Share on

Condition: new, Year of construction: 2026, The ESR-1300/2.5 three-roll electromechanical rolling mill with asymmetric shafts is used to produce cylindrical and conical shells of various diameters. This machine is designed for bending sheets up to 2.5 mm, length 1300 mm, upper shaft diameter 90 mm. The most popular are three-roll bending machines from this series, due to their relatively simple and functional construction. Key benefits: Asymmetric arrangement of cylinders The lower and upper rollers rotate through a system of gears and a chain drive from an electric motor Top roller rotates in both directions, equipped with a tilt and swivel mechanism Height-adjustable bottom and side rollers (manually adjustable) Possibility of cone bending Foot control with emergency stop button Chain drive transmits rotation from the electric motor to the rollers. The upper roller is foldable, which facilitates the removal of finished products. The folding roller is equipped with a lock preventing its spontaneous opening during operation. Standard equipment DTR in Polish CE Declaration Technical data Model CORMAK ESR-1300/2.5 Maximum working width [mm] 1300 Maximum material thickness [mm] 2.5 Roll diameter [mm] 90 Motor power [kW] 1.5 Device dimensions (length x width x height) [mm] 1800 x 640 x 1000 Weight of the device [kg] 600 Godomtwuyopfx Ankeub NOTE: Standard Equipment Ratings are based on 260 N/mm Cold Yield Metals 2 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, functionality: fully functional, Year of construction: 2026, The ESR 2020 x 3.5 mm three-roll electromechanical rolling mill with asymmetric shafts is used to produce cylindrical and conical shells of various diameters. This machine is designed for bending sheets with a thickness of up to 3.5 mm, length up to 2020 mm, diameter of the upper shaft 125 mm. The most popular are three-roll bending machines from this series, due to their relatively simple and functional design. Most suitable for those customers who are looking for equipment with medium performance and low cost. The most important advantages: Asymmetric arrangement of the rollers The lower and upper rollers rotate through a system of gears and a chain drive from an electric motor The upper roller rotates in both directions, equipped with a tilt and turn mechanism Height adjustable lower and side rollers (manually adjustable) Cone bending possible Foot control with emergency stop button Technical data: Model: ESR 2020 x 3.5 mm Maximum work width: 2020 mm Maximum material thickness: 3,5 mm Guodpfx Anerh E Nroksb Roller diameter: 125 mm Motor power: 3 kW Dimensions 2530 x 640 x 1050 mm Weight 1230 kg. (±2%) Standard equipment: Foot controller for operation Manual in Polish/English CE declaration The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, functionality: fully functional, Year of construction: 2026, Electromechanical Plate Rolling Machine ESR 1300 x 4.5 mm Asymmetrical 3-Roll Design | Max Thickness: 4.5 mm | Working Width: 1300 mm The ESR 1300 x 4.5 mm electromechanical plate roller is designed for the production of cylindrical and conical shapes with varying diameters. It is suitable for bending sheet metal up to 4.5 mm thick and 1300 mm wide, with a top roll diameter of 120 mm. This model is part of a popular series of 3-roll bending machines appreciated for their simple yet functional construction. Machine Description Asymmetrical roll arrangement for increased flexibility in shaping Top and bottom rolls powered via gear and chain transmission driven by an electric motor Top roll can rotate in both directions and is equipped with a tilting and swiveling mechanism for easy part removal Manually adjustable lower and side rolls for precise bending control Cone bending capability Foot pedal controller with an emergency stop button for safe and convenient operation Technical Specifications Parameter Value Model ESR 1300 x 4.5 mm Max. working width 1300 mm Roll diameter 120 mm Max. sheet thickness 4.5 mm Motor power 2.2 kW Machine dimensions (L × W × H) 1810 × 640 × 1050 mm Approx. weight 660 kg (±2%) Standard Equipment Foot pedal control unit User manual Gedpfxow H Rqys Ankeub CE Declaration of Conformity Manufacturer: Cormak

Condition: new, Very robust motorized 3-roll roller Weight 670 kg Executed with hardened rolls Hardness is HRC 28-32 Min. Sheet thickness ----- 0.5 mm Max. Plate thickness ----- 3 mm Gsdpfx Ansga Tz Ajksub Max. Working width ----- 1000 mm Pre-bending ----- 2.5 mm Roller diameter ----- 95 mm Motor power ----- 1.5 KW INCLUDED * Hardened rollers * SCHNEIDER electrical components

Condition: new, Year of construction: 2026, functionality: fully functional, The three-roll electromechanical plate rolling machine ESR 2550 x 3.5 mm with asymmetrical rolls is designed for the production of cylindrical and conical shells with various diameters. This machine is intended for bending metal sheets up to 3.5 mm thick and up to 2550 mm in length. The diameter of the top roll is 125 mm. Three-roll bending machines from this series are the most popular due to their relatively simple yet functional design. They are best suited for customers looking for medium productivity at a low cost. Main advantages: Guodpsycg Ursfx Ankjb Asymmetrical roll arrangement The lower and upper rolls are driven by an electric motor via a gear system and chain drive The upper roll rotates in both directions and is equipped with a tilting and swiveling mechanism Lower and side rolls with height adjustment (manually adjusted) Cone bending capability Foot pedal control with emergency stop button Technical data: Model: ESR 2550 x 3.5 mm Maximum working width: 2550 mm Maximum material thickness: 3.5 mm Roll diameter: 125 mm Motor power: 3 kW Dimensions (L/W/H): 3000 x 640 x 1050 mm Approx. weight: 1500 kg (±2%) Standard equipment: Foot pedal control Operating manual in Polish CE Declaration of Conformity

Condition: new, functionality: fully functional, Year of construction: 2026, Machine characteristic A solid steel machine body based on the most modern construction supported by many years of experience in roll bender production. All rolls hardened and very precisely bearing Hydraulic swivel bearings for easy removal of workpiece. Asymmetric rotary bender with three rollers. Adjustable bottom and rear roller. Tilting upper roll with eccentric locking. Operating the machine via a foot control. Manual rear roller infeed. Braking motor Control panel Technical parameters MAXIMUM WORKING WIDTH 1300 mm MAXIMUM MATERIAL THICKNESS 4,5 mm MOTOR POWER 2,2 kW Gsdpfx Anorh E Iujkoub DIMENSIONS 1810 mm x 640 mm x 1050 mm WEIGHT 660 kg Standard equipment Foot controller Tool case TOD in Polish language EC Declaration The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, ROGI PR-1300 ELECTRIC ROLLER Heavy and robust execution Weight 800 KG Gusdpfxsga Tvwe Anksb Executed with hardened rolls Hardness is HRC 28-32 Min. Sheet thickness ----- 0.5 mm Max. Plate thickness ----- 3 mm Max. Working width ----- 1300 mm Pre-bending ----- 2.5 mm Roller diameter ----- 95 mm Motor power ----- 2.2 KW INCLUDED * Hardened rollers * SCHNEIDER electrical components

Condition: used, 3-roller bender Brand RAGACHE Type New Tube CP70 3 drive rollers diameter 232 mm Rectangle capacity Standard steel 60.0 mm Round capacity Standard steel 40.0 mm Capacity L Standard steel 70.0 mm Gujdpfxjuluhwj Ankob Capacity U Standard steel 120.0 mm Capacity T Standard steel 60.0 mm Capacity I Standard steel 120.0 mm

Condition: good (used), GMP Surelam-Pro 500D Roll Laminator Production-ready, Guodey Sd Txopfx Ankjb This high-quality machine is manufactured in Korea. Description: The GMP SURELAM laminator is a professional roll laminator with a working width of 500 mm. This laminator is ideal for a small printing company, advertising agency, or office. This device allows us to laminate a variety of materials thanks to independent heating control of the upper and lower rollers. Electronic lamination process control and two operating modes: manual and automatic, make working with this machine easy and enjoyable, and ensures laminations are always of the highest quality. The laminator offers single- or double-sided lamination options. Includes laminating pouch Technical specifications: – Maximum laminating width: 500 mm – Pouch thickness: 25-500 microns – Lamination speed: 700 mm/min – Pressure adjustment: manual – Temperature control: digital – Power supply: 230 V – Power: 3000 W

Condition: excellent (used), CATALOG NUMBER 7854 Technical data: - belt length: 2515x152 mm - belt width: 150 mm - oscillation - vertical oscillation movement - sanding length: 790 mm - table size: 840x300 mm - worktable for contoured elements: 300x250 mm - worktable adjustment: 80 mm - motor: 2.2 kW - sanding unit adjustable angle: 90-45 degrees - sanding head adjustment: 0-45 degrees - extraction port diameter: 100 mm - dimensions (length/width/height): 1450/600/1230 mm - weight: 138 kg ADVANTAGES – with oscillation – with shoe – suitable for contour and straight sanding Gedpfxjy Rr T Rs Ankoub – unit can operate vertically and horizontally – unpainted – used sander, very good condition Net price: 3,900 PLN Net price: 930 EUR (depending on the 4.2 EUR rate) (Prices may change with higher fluctuations)

Condition: new, Year of construction: 2026, CORMAK HBS275 band saw, equipped with a hydraulic cylinder, a cooling system and an arm swivelling up to 60º, together with blades from renowned German company Röntgen, is used commonly in ironworking, where precision, quality and cutting speed are essential. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or with any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Carbide guiding drastically reduces the wear of the machine and blades. Machine's arm made of uniform cast iron as well as a 27 mm wide cutting band are capable of low and high quantity cutting of profiles and other materials. The vice is located in an adjustable bed, equipped with a quick clamp. Blade guides have cemented carbide plates and roller bearings. Its these cemented carbide guides that provide cut precision and straightness. The arm, positioned at an angle of 25º, thus increasing blade durability. To the bottom of the arm a brush wire is attached, ensuring clean and functional brush. Machine's drive is transmitted through a worm drive. A 3-phase motor with 2 cutting speeds and motor thermal protection. This cutting machine also has a strain gauge - a band tension sensor and an automatic switch-off in case the cutting band breaks. Upper part of the base constitutes a tank for flood coolant draining and chips produced during cutting. A cast iron workbench is attached to the base, with a swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band and the arm lowering feed. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 37.5 and 75 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Total power 1.5 kW Power supply 400V 50Hz Arm lowering control hydraulic cylinder Band dimensions 2455 x 27 x 0.9 mm Band speed 37.5/75 m/min Vice base height 900 mm Weight 215 kg Angle Guedpfx Anoudi Unskob 0º ø220 260 x 140 200 x 200 45º R ø160 160 x 140 160 x 160 60º R ø100 120 x 100 100 x 100

Condition: new, Year of construction: 2025, CNC centers have been designed based on proven components that guarantee reliability for a long time of use. The massive machine body ensures efficient and precise machining. Hermetic chamber ensures safety and cleanliness at the workplace. The table with a hardened surface can accept workpieces without loading the mechanical elements of the structure. Each machine in this series is equipped with an efficient cooling system to ensure optimal cutting conditions. Description Linear guides Top quality guides for all axes Massive machine body Good accessibility of the work table Hermetic working chamber ensuring work safety CNC control (SIEMENS SINUMERIK 808D) Guedpfxorh Ev He Ankjb Technical parameters Spindle taper BT40 Table dimensions 1000 x 500 mm The distance between the spindle and the table surface 620 mm The distance between the spindle and the column 530 mm Table travel 800 x 500 mm Z axis movement range 500 mm Spindle speed range up to 10 000 rpm Number / width / spacing of T-slots 4 / 18 mm / 120 mm Working feed 2000 mm/min Rapid feed X,Y,Z 15 m/min Number of tools in the magazine 24 Power (torque) of feed drives 1,75 / 1,75 / 3,5 kW Spindle motor power 5,5 kW Power supply, total power 400V / 18 kW Max. table load 500 kg Weight 5000 kg Dimensions (L x W x H) 2800 x 2300 x 2700 mm

Condition: new, Year of construction: 2026, CNC Machining Centers MILL 530 – Reliability and Precision Combined CNC machining centers MILL 530 are industrial machines that combine reliability and precision in a single solution. Thanks to their robust construction and proven components, these machines are ideal for demanding industrial applications. The massive machine frame ensures stability and machining accuracy, while the fully enclosed working chamber keeps the workspace clean and safe. The hardened worktable surface is gentle on machined parts, and the efficient cooling system provides optimal cutting conditions. Choose the MILL 530 to ensure the highest quality and efficiency in your production. MILL 530 Machining Center – Precision and Efficiency in CNC Machining The MILL 530 machining center is an advanced vertical CNC machining center designed for precise metal machining in manufacturing plants. Equipped with modern technologies and a solid construction, it ensures reliability and high performance in a wide range of industrial applications. Technical Specifications Travel Range X-axis: 450 mm Y-axis: 340 mm Z-axis: 400 mm Distance from spindle nose to worktable: 10–470 mm Distance from spindle center to column guideway: 350 mm Feed Rates Rapid traverse X-axis | power | torque: 14 m/min | 1 kW | 4.78 Nm Rapid traverse Y-axis | power | torque: 14 m/min | 1 kW | 4.78 Nm Rapid traverse Z-axis | power | torque: 11 m/min | 1.75 kW | 8.36 Nm Worktable Table size: 900 × 400 mm T-slots: 4 × 14 mm Spindle Spindle speed: 100–8,000 rpm (optional 10,000 rpm) Spindle taper: BT40 Coolant pump: 480 W; 2.5–3.3 m³/h Main motor power: 3.7 kW Tool Magazine Max. tool diameter: 100 mm Gedpfx Ansyb Nc Njkeub Max. tool length: 300 mm Max. tool weight: 7 kg Tool change time: 2–5 s Other Parameters Positioning accuracy: 0.01 mm Dimensions (L × W × H): 2100 × 2250 × 2600 mm Weight: 1800 kg Standard Equipment SIEMENS SINUMERIK 808 Advanced control system 8,000 rpm spindle 16-tool magazine Three-color alarm lights Work lighting Closed coolant system Fully enclosed machine housing Automatic lubrication system Pneumatic system Siemens Sinumerik 808D – Compact CNC Control for Basic Applications The Siemens Sinumerik 808D is an economical CNC control designed for entry-level lathes and milling machines, ideal for small and medium-sized workshops. Its key features include: Intuitive operation: Graphical interface and Teach-In function simplify programming and significantly reduce operator training time. High reliability: Robust design resistant to dust and moisture, ensuring stable operation in workshop environments. Compatibility: Designed for machines with standard requirements, with easy integration of SIEMENS servo drives. Cost optimization: Low energy consumption and minimal service requirements, making it ideal for beginner CNC users.

Condition: new, Year of construction: 2026, CNC Machining Centers MILL 530 – Reliability and Precision Combined CNC machining centers MILL 530 are industrial machines that combine reliability and precision in a single solution. Thanks to their robust construction and proven components, these machines are ideal for demanding industrial applications. The massive machine frame ensures stability and machining accuracy, while the fully enclosed working chamber keeps the workspace clean and safe. The hardened worktable surface is gentle on machined parts, and the efficient cooling system provides optimal cutting conditions. Choose the MILL 530 to ensure the highest quality and efficiency in your production. MILL 530 Machining Center – Precision and Efficiency in CNC Machining The MILL 530 machining center is an advanced vertical CNC machining center designed for precise metal machining in manufacturing plants. Equipped with modern technologies and a solid construction, it ensures reliability and high performance in a wide range of industrial applications. Technical Specifications Travel Range X-axis: 450 mm Y-axis: 340 mm Z-axis: 400 mm Distance from spindle nose to worktable: 10–470 mm Distance from spindle center to column guideway: 350 mm Feed Rates Rapid traverse X-axis | power | torque: 14 m/min | 1 kW | 4.78 Nm Rapid traverse Y-axis | power | torque: 14 m/min | 1 kW | 4.78 Nm Rapid traverse Z-axis | power | torque: 11 m/min | 1.75 kW | 8.36 Nm Worktable Table size: 900 × 400 mm T-slots: 4 × 14 mm Spindle Spindle speed: 100–8,000 rpm (optional 10,000 rpm) Spindle taper: BT40 Coolant pump: 480 W; 2.5–3.3 m³/h Main motor power: 3.7 kW Tool Magazine Gusdpfxeyb D Dbs Anksb Max. tool diameter: 100 mm Max. tool length: 300 mm Max. tool weight: 7 kg Tool change time: 2–5 s Other Parameters Positioning accuracy: 0.01 mm Dimensions (L × W × H): 2100 × 2250 × 2600 mm Weight: 1800 kg Standard Equipment SIEMENS SINUMERIK 808 Advanced control system 8,000 rpm spindle 16-tool magazine Three-color alarm lights Work lighting Closed coolant system Fully enclosed machine housing Automatic lubrication system Pneumatic system Siemens Sinumerik 808D – Compact CNC Control for Basic Applications The Siemens Sinumerik 808D is an economical CNC control designed for entry-level lathes and milling machines, ideal for small and medium-sized workshops. Its key features include: Intuitive operation: Graphical interface and Teach-In function simplify programming and significantly reduce operator training time. High reliability: Robust design resistant to dust and moisture, ensuring stable operation in workshop environments. Compatibility: Designed for machines with standard requirements, with easy integration of SIEMENS servo drives. Cost optimization: Low energy consumption and minimal service requirements, making it ideal for beginner CNC users.

Condition: new, Year of construction: 2026, Heavy-Duty CNC Lathe Series – Precision and Productivity The heavy-duty CNC lathe series guarantees high efficiency in powerful cutting operations combined with excellent machining accuracy. Our CNC Lathe 800 × 3000 is not just a machine—it is a reliable partner for both experienced professionals and those starting their journey in manufacturing. Its power and stability, supported by wide guideways, make it an indispensable solution for even the most demanding metalworking projects. CNC Lathe 800 × 3000 The CNC Lathe 800 × 3000 is a professional numerical control machine designed for high-precision metal machining in demanding industrial applications. Thanks to its rigid construction and advanced control systems, it delivers reliability and high productivity in both serial and single-piece production. CNC Control – Siemens Sinumerik 808D Siemens Sinumerik 808D is a cost-effective CNC control system dedicated to entry-level CNC lathes and milling machines, ideal for small and medium-sized workshops. Its key features include: Intuitive operation – Graphical interface and Teach-In function simplify programming and significantly reduce operator training time. Gjdpfxsycrz Rs Ankoub High reliability – Rugged design resistant to dust and moisture ensures stable operation in harsh workshop environments. Compatibility – Designed for machines with standard requirements, offering seamless integration with SIEMENS servo drives. Cost optimization – Low energy consumption and minimal maintenance requirements make it ideal for first-time CNC users. Technical Specifications – CNC Lathe 800 × 3000 Distance between centers: 3000 mm Maximum turning diameter: 800 mm Maximum turning diameter over cross slide: 520 mm Bed width: 600 mm Spindle bore: 104 mm (130 mm optional) Spindle speed range: 22–108 / 60–300 / 240–1200 rpm Maximum X/Z axis travel: 420 / 1350, 2850 mm Rapid traverse X/Z: 4 / 8 m/min Positioning accuracy: 0.03 / 0.04 mm Repeatability X/Z: 0.012 / 0.02; 0.025 mm Tailstock quill diameter: 100 mm Maximum tailstock quill travel: 250 mm Tailstock taper: MT5 Number of tools: 4 (6 or 8 optional) Tool size: 32 × 32 mm Maximum load capacity: 1700 kg Main motor power: 15 kW Machine weight: 8700 kg Machine dimensions (L × W × H): 5200 × 2540 × 1860 mm Standard Equipment Fully enclosed working area 4-station tool post 320 mm 3-jaw chuck Chuck and manual tailstock Fanuc or Siemens CNC control Coolant system Machine lighting

Condition: new, Year of construction: 2026, Efficient lathe with a flat bed with a wide range of applications, dedicated to serial and unit production. The rigid construction of the lathe and massive hardened and ground guideways guarantee stability, turning accuracy and high repeatability of machining large-size details. Technical parameters TURNING DIAMETER OVER BED 560mm TURNING DIAMETER OVER SUPPORT 340mm MAXIMUM ITEM LENGTH 1500mm SPINDLE SPEED 100-800rpm Gedsi Apf Tspfx Ankoub SPINDLE BORE 90mm BED WIDTH 430mm SPINDLE A2-11 NUMBER OF TOOLS 8 TOOL SIZE 25X25mm TAILSTOCK MT 5 MAXIMUM TAILSTOCK TRAVEL 150mm ENGINE POWER 11kW DIMENSIONS 3770x1500x1900mm NET WEIGHT 4150 kg Available equipment SINUMERIK 808D control in Polish SIEMENS servo drives hydraulic 3 jaw lathe chuck 8-station turret set of soft jaws hydraulic tailstock cooling system automatic lubrication system for gears and guides 24V halogen lighting manual in Polish & English EC declaration The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2025, An efficient lathe with a flat bed and a broad scope of big and small scale machining possibilities. This machine can lathe external, internal, spherical surfaces and threads. Using constant cycles for transverse turning, normal turning, tapering, threading, plunge cutting and contouring drastically simplifies the setup and decreases the time of machining. Technical data Swing over bed Φ 400 mm Swing over cross slide Φ 210 mm Maximum turning length 1000 mm Spindle speed range 0-2000 RPM Spindle bore Φ 75 mm Spindle bore taper MT6 Number of tools in the holder 8 Maximum tool holder size 25×25 mm X/Z axes smallest setting unit 0.001 mm ; 0.001 mm X-axis feed speed 8 m/min Z-axis feed speed 10 m/min Gujdpoiz S S Ujfx Anksb Tailstock spindle taper MT4 Maximum tailstock spindle feed 120 mm Main motor power 7.5 kW (X) feed engine 6 Nm (Z) feed engine 6 Nm Dimensions 2640×1500×1766 mm Weight 1800 kg Available equipment SINUMERIK 808D control system in Polish and English SIEMENS servomotors hydraulic chuck 8 - position tool holder soft jaw kit hydraulic tailstock cooling system automatic gear and guide lubrication system 24V halogen lighting Polish and English manuals EC declaration The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, Technical data Swing over bed 360 mm Swing over cross slide 150 mm Maximum turning length 750 mm Spindle speed 100–2000 rpm Spindle bore Ø 51 mm Spindle taper A2-6 Tailstock spindle taper MT5 Number of tools in the holder 8 Tools size 20×20 Tailstock spindle feed 100 mm Main motor power 3.7 kW Dimensions 1815×1300×1600 mm Weight 1300 kg Available equipment SINUMERIK 808D control system in Polish and English SIEMENS servomotors 1 live tool 3-jaw hydraulic chuck 8-position turret head soft jaw kit hydraulic tailstock cooling system automatic gear and guide lubrication system 24V halogen lighting Polish and English manuals EC declaration The price is a net price. Price does not include shipping costs. Gusdpfxeizw E As Ankjb For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, These lathes are ideal for efficient and precise machining of not only metal but also other materials. Features involve machining internal and external cylindrical, frontal, tapered and semicircular surfaces as well as threading. The bed is a solid cast iron, resistant to vibrations. Induction-hardened and ground guides. Technical data SWING OVER BED 320 mm SWING OVER CROSS SLIDE 160 mm DISTANCE BEETWEN CENTERS 750 mm MAXIMUM ELEMENT LENGTH 1000 mm SPINDLE SPEED 100–2500 rpm SPINDLE BORE 46 mm SPINDLE TAPER MT5 NUMBER OF TOOLS 6 TOOLS SIZE 16×16 mm MAXIMUM SHAFT DIAMETER IN BORE 44 mm TAILSTOCK TAPER MT3 MAXIMAL TAILSTOCK TRAVEL 100 mm MOTOR POWER 3 kW DIMENSIONS 2370×1420×2000 mm NET WEIGHT 950/1300 kg Available equipment SINUMERIK 808D control system in Polish and English SIEMENS servomotors 3-jaw hydraulic chuck 6-position turret head soft jaw kit hydraulic tailstock cooling system automatic gear and guide lubrication system 24V halogen lighting Polish and English technical and engineering documentation Gjdoi Apg Uopfx Ankoub EC declaration The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.