Used Control Panel / Membrane Keypad Weinig Rondamat 912 for sale (49,939)

Condition: used, consisting of: decorative film + aluminum support plate + printed circuit board. new decorative film (manufactured in 2019), control panel 23 001 0078, identification no. 10017781 / 912053002, used original printed circuit board, cleaned and tested, Lsdpfolkch Ssx Anujac used original aluminum support plate, cables available upon request.

Condition: excellent (used), Year of construction: 1996, grinding length: 240 mm, total width: 240 mm, Weinig Rondamat 925 Year of manufacture: 1996 Maximum tool width: 240 mm Grinding wheel diameter: 150-225 mm Ledpfszbz U Dsx Anusac Grinding wheel bore: 40 Tool diameter: 100-230 mm

Condition: as good as new (ex-display), Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! CAN SHARPEN MAX 406MM DIAMETER CUTTERS !!! The G-716 Semi-automatic Cutterhead Grinder is used to sharpen 178mm to 406mm diameter eased edge, milled to pattern, and fingerjoint cutterheads. Worktable traversing is automatic and has adjustable stops. Cutterhead indexing is manual. Each knife is held against a positive stop while being ground !!! No Index Plate To Change No index plate to change when working with heads with different numbers of knives. The use of an index plate assumes that the knives and head separations are uniform throughout, which is often not the case. If the height of the knife is high or low, then the front face of the knife will vary from knife to knife making the task of grinding difficult. The one constant is the back face of the knife, therefore the use of an indexing stop against the back face will provide for accurate indexing regardless of the irregularities in the knives and head slots. Head Indexing and Wheel Feed: Manual Minimum / Maximum Diameter Cutterhead: 7″ Min./16″Max. 178mm Min./ 406mm Max. Worktable Feed: Air / Oil Travel (maximum): 12″ 305mm. Adjustable Limits: Proximity Switch Speed: Fully Adjustable Index Method: Manual index after each knife is ground. Grinding Spindle: 1-1/2 HP Wash Down Duty TEFC Motor 3600 RPM, Dual ABEC 7 Precision Bearings, with Sealed Lubrication. 8″ (203mm)Diameter Grinding Wheel (9″ 229mm Diameter Max.) Coolant System: 15 Gallon Tank with Casters, Sediment Tray Full View Sight Glass, 5 GPM Pump (120VAC) Lajdpsq Dzi Tefx Anujc Wash Down Hose Included Specifications Grinds 7″ to 16″ diameter eased edge, milled to pattern, and finger joint heads Automatic traversing worktable with adjustable travel limits Manual indexing of knives against a positive stop with grinding position pneumatic brake allowing precision indexing without the need of an index plate High precision 1-1/2 HP grinding spindle with sealed lubrication Recirculating adjustable flow flooded coolant system with wash down hose Fully enclosed grinding chamber with viewing windows and task light Grinding wheel feed allows unattended operation. New Proscale.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Weinig Rondamat 980 Lasdpfxswvvylo Anuec Year 2010 Technical data: Max. tool width: 330 mm With PowerLock: 322 mm Tool flight circle: 100 - 300 mm With PowerLock (optional): 100 - 250 mm Grinding wheel diameter: 125 - 200 mm Spindle speed frequency-controlled: 1500 - 4600 rpm Grinding spindle drive: 1.5 kW

Condition: good (used), Year of construction: 2001, For inquiries: Zoltán Utasi Plus 36 30 205 7380 Grinding of planer knives (conventional and hydro tools, as well as profile knives – profile knives ground based on templates) Machining length: 240 mm Tool diameter: 100–230 mm Grinding wheel diameter: 150–225 mm Grinding wheel width: 2–3–4–10 mm Relief angle: 15–35° Side angle: 0–10° Coolant tank: 50 L Total electrical power: 2 kW Spindle diameter: D40 and D50 mm Infinitely variable speed control for grinding wheel: 1000–3000 rpm Accuracy: within 0.005 mm Motorized lateral feed Liquid-cooled system Equipped with profile copying unit Accessories included (grease pump, knife holder, grinding wheel, dressing tool with tracing pin, template holder) Lajdpfjy Nmuysx Anuec This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: used, grinding wheel diameter max. 225 mm Laedpfslf H Tgox Anujc diameter of tools max. 300 mm tool diameter min. 80 mm Weinig Rondamat 929 knife grinding machine for manufacturing profile knives. Production from a straight blank or regrinding of used knives using a template. Max. tool width: 230 mm Includes new coolant pump.

Condition: ready for operation (used), functionality: fully functional, type of input current: three-phase, grinding width: 240 mm, Knife grinding machine WEINIG Rondamat 168 Max. tool diameter 3500mm Disk diameter 150mm Tool length 240 mm Lasdjufcnqspfx Anusc Main cutting edges up to 25° Motor 1, 1 kW

Condition: new, Diameter: 150 mm Lodsvl Hy Aopfx Anujac Manufacturer No.: 920 072 005 Grit: D 126 900819 Grinding wheel for Weinig Rondamat or similar sharpening machines.

Condition: used, Year of construction: 2015, WEINIG - Rondamat 1000 CNC High-precision knife grinding machine - Automatic data import of CNC programs from the Moulder Master - Fully automatic sharpening and production of profile knives from a solid blank - Fully automatic re-sharpening of straight planer knives and profile knives in the cutterhead Grinding of planer knives in the cutterhead with standard knife projection is possible. Used machine Rondamat 1000 Year of manufacture: 2015 Grinding unit: Robust spindle carrier with precise guides for concentricity accuracy under 0.005 mm Motorized radial adjustment for various grinding wheel diameters Back relief angle fully automatically adjustable Lateral relief angle fully automatically adjustable Grinding spindle with HSK interface for fast, repeatable grinding wheel changes and high concentricity accuracy. In combination with the grinding wheel magazine, the wheel change can be carried out automatically. HSK 50 F Grinding wheel diameter min./max. 150/200 mm Grinding wheel width (Borazon, diamond) 2-3-4-10 mm Grinding wheel bore 60 mm Grinding spindle drive 1.5 kW Grinding spindle speed, frequency-controlled 1500-3000 rpm Relief angle grinding: - radial, on knife back 10°-30° - lateral depending on the profile contour 0-20° Accessories: 3 grinding wheel holders for grinding wheel diameter 200 mm LED light for the machine interior Extras: Automatic grinding wheel measurement via optical measuring system for positioning the grinding wheel on the grinding support Measurable diameter min. - max. 145-200 mm Automatic tool changer for changing grinding wheels between profiling and finish grinding - 3 magazine slots Grinding wheel, Borazon, for profile knives in HSS and Stellite, wheel diameter 200 mm, B 151 - radius 2 mm Grinding wheel, Borazon, for profile knives in HSS and Stellite, wheel diameter 200 mm, No. 930062010, B 46 - radius 1 mm, finish grinding Grinding wheel, Borazon, for straight grinding in HSS and Stellite, wheel diameter 150 mm, No. 920072015, B 126 - width 10 mm, rough grinding 3 additional grinding wheel holders - HSK spindle for grinding wheel diameter 200 mm Coolant system: Top cooling via plastic articulated hose and from below via the knife support directly at the grinding point prevents overheating of knives even with high stock removal Dosing of coolant flow via a central distributor with stainless steel ball valves Automatic coolant cleaning through a conveyor filter system Soiled filter paper is automatically removed Coolant tank approx. 70 l Coolant additive 5 l Coolant pump motor 210 watts Tool holder: System "PowerLock" 360 For grinding PowerLock tools and large-bore tools - Max. tool weight 80 kg - Tool holder with manual HSK quick-clamping system - Spindle can be switched for right and left tools - Max. tool width 360 mm Lasdpeyzaz Rsfx Anujc - Max. tool cutting circle 300 mm - Min. tool cutting circle 90 mm - incl. PowerLock adapter for mounting conventional tools, shank diameter 40 mm Additional HSK clamping unit Additional part fixture Automatic processing of two tools in one operation.

Condition: used, Year of construction: 2004, total height: 1,600 mm, total length: 1,250 mm, total width: 1,400 mm, Colour: Grey Empty weight: 900 kg Price: On request - Details: - └ Description: Bad bearings - Year: 2004 - Documentation available: No - CE certificate present: No - Serial number: 102850 - Motor power: 1.0kW - Transport dimensions: 1250mm x 1400mm x 1600mm (l x w x h) - Transport weight [kg]: 900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Laedoyr Rnzepfx Anusc Lukas van Rossum

Condition: used, Year of construction: 2006, total height: 1,600 mm, total length: 1,300 mm, total width: 1,500 mm, Colour: Grey Empty weight: 900 kg Price: On request - Year: 2006 - Documentation available: No - CE certificate present: No - Serial number: 108088 - Motor power: 1.0kW - Transport dimensions: 1300mm x 1500mm x 1600mm (l x w x h) - Transport weight [kg]: 900kg - Transport packages [pcs.]: 1 Financial information Ljdsytbc Sepfx Anujac VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), WEINIG Rondamat 909, S/N 93362, Year 2001 – Ref. No. 119131 WEINIG Rondamat R 909, Machine for the automatic sharpening of straight knives in planing heads • Automatic indexing • Planer head diameter min. 85 mm to max. 225 mm • Max. tool length 330 mm (table stroke 440 mm) • Unlimited number of cutting edges • Continuously adjustable clearance angle 15° – 35° • Grinding spindle speed n=4,000 rpm • Grinding wheel D=125 mm, bore d=20 mm • Grinding motor 1.1 kW, n=2,850 rpm • Feeding motor 0.053 kW, n=1,300 rpm • Grinding feed rate 650 mm/min • Indexing motor 0.033 kW, n=1.00 rpm • Freely selectable grinding passes per tool 1 – 5 • Coolant pump motor 0.065 kW, n=2,900 rpm • Coolant / tank capacity approx. 115 liters • Mounting arbor D=50 x 330 mm • Machine complete with accessories Machine dimensions • Width 1,150 mm • Depth 820 mm • Height 1,200 mm • Weight 450 kg Condition: 100% function tested = AS NEW condition Price: On request Lasdpswvql Nofx Anuec Payment: Prior to handover/loading Inspection: At any time by prior arrangement Subject to error and prior sale

Condition: excellent (used), TOOL SHARPENING MACHINE FOR FULLY-AUTOMATIC SHARPENING OF STRAIGHT KNIVES TECHNICAL DATA MAX. TOOL WIDTH: 330 MM EXTENDED (OPTIONAL): 460 MM WITH POWERLOCK: 322 MM TOOL RADIUS: 100 - 300 MM EXTENDED (OPTIONAL): 140 - 340 MM WITH POWERLOCK: 100 - 250 MM Ledpfx Aney Ivbasueac SANDING DISC DIAMETER: 125 - 200 MM SPINDLE RPM: 4600 RPM FREQUENCY CONTROLLED: 1500 - 4600 U/MIN

Condition: like new (used), Year of construction: 2010, 🔧 Weinig Rondamat 960 Powerlock / HSK + Opticontrol + CNC For sale: high-precision profile knife grinder Weinig Rondamat 960 Powerlock / HSK, equipped with Opticontrol + CNC. The machine is designed for grinding straight knives and profile grinding using templates. It allows grinding of knives mounted in cutterheads as well as manual profile and straight grinding using a hand-held unit. ⚙️ Technical specifications: • Grinding wheel diameter (min./max.): 150 / 225 mm • Grinding wheel width: ceramic 5 mm, borazon (CBN) 10 mm • Grinding wheel bore: 60 mm • Turning diameter (min./max.): 100 / 300 mm • Max. tool width: 360 mm • Grinding wheel motor power: 1.1 kW • Spindle speeds: 1700 / 2000 / 2400 / 3000 rpm 📐 Angle adjustments: • Radial (back) angle: 10 – 30° Lasdpfoxlk Nqsx Anuoc • Axial angle: 0 – 20° • Swivel head: up to 60° 💧 Equipment & connections: • Coolant tank: approx. 50 liters • Table travel: 0 – 360 mm • Electrical connection: approx. 2 kW • Pneumatic connection: 5 bar • Voltage: 380 V / 50 Hz 📄 Complete documentation included. 👉 Ideal for woodworking shops, tool rooms, and industrial use. 👉 Accurate and reliable machine, ready for operation.

Condition: excellent (used), functionality: fully functional, Head Grinder Rondamat 925 + Weinig CAM 970 1. Rondamat 925 Grinding wheel diameter: 150-225 mm Grinding wheel width: - ceramic: 5 mm - borazon: 10 mm Grinding wheel bore: 60 mm Tool diameter: 100-230 mm Tool width up to 240 mm 2. CAM 970 Ljdsxyynxepfx Anuoac Tool measuring system

Condition: excellent (used), Year of construction: 2004, Weinig Rondamat 960 Powerlock (Automatic straight knife grinder and profile grinder) Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! Specification as follows Weinig Rondamat 960 Powerlock / HSK profile grinder. High pecision knife grinder for sharpening straight knives and profiling using a template. Sharpening straight knives in the cutter block. Lajdpfx Answ Np Uueujc Manual grinding machine for profile and straight grinding. Grinding wheel diameter min./max.: 150 mm / 225 mm Grinding wheel width: Ceramic 5 mm, Borazone 10 mm Grinding wheel bore: 60 mm Tooling circle min./max.: 100 mm / 300 mm Tool width max.: 240 mm Grinding wheel drive: 1,1 kW Spindle rpm: 1700 / 2000 / 2400 / 3000 U/min Free angle: Radial: (at the back) 10 - 30 degrees, Axial: 0 - 20 degrees For swivel heads up to 60 degrees Coolant tank approx. 50 litres Table feed 0 - 240 mm Electrical connection approx. 2 kW Pneumatic connection value 5 bar Operating voltage 380 V / 50 Hz Full documentation. POWER LOCK SYSTEM option For grinding powerlock tools. Tool holder with manual HSK quick clamping system. Radial table clamping with fine adjustment Max tool width 240mm Max COMFORT PACKAGE option Variable grinding wheel speed 1500 to 3000rpm Lamp Back clearance angle is motorised Grinding wheel advance is motorised Setting of the side clearance angle is pneumatic Hydraulic grinding wheel clamping. Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!!

Condition: excellent (used), Rondamat R 934, year 1997, in very good condition. Lajdpfsxiv S Esx Anuec

Condition: like new (used), Year of construction: 2004, functionality: fully functional, planing height: 130 mm, planing width: 240 mm, Weinig Unimat 300 - Siemens electrical control - Five-head planer - planing size: 240x130mm Laedew S Dkcjpfx Anuoc - mint condition

Condition: good (used), Weinig Rondamat R960 Ledpfxowzu N Ao Anujac Year of manufacture: 2002

Condition: used, Used SIMATIC HMI operator panel from Siemens for industrial visualization and control applications. Manufacturer: Siemens Model: 6AV7 803-0BC12-1AA0 Series: SIMATIC HMI Device type: Operator panel Laodpfxozd Rbqj Anuec Mounting type: Panel mounting Application area: Machine and system visualization Industrial application: Automation technology Condition: Used

Condition: good (used), Here we offer you a Stäubli robot. Stäubli robot with control unit and operating panel. The Stäubli RX130 is a fast and precise medium payload robot (max. 12 kg) with a maximum arm reach of 1360 mm. It is suitable for machine tending, painting, cleanroom, life sciences, and pharmaceutical applications. The RX130 robot is equipped with the CS7 controller and has an articulated arm with 6 degrees of freedom for maximum flexibility. The spherical working envelope of the robot enables optimized use of the robot cell. It can be mounted on the floor or ceiling. The 6-axis RX130 offers high-resolution servos with absolute calibration and a fully enclosed structure, ideal for applications in harsh environments. 3x400V-50/60Hz-5500VA Weight 260kg Lajdpfx Aozdittjnujc Type: Stäubli CS7 RX130 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have by telephone. Written orders can be placed via email or fax.

Condition: good (used), Adept control unit, Model 310, with operating panel. The control unit is supplied together with the operating panel, cables, and software package. Lasdpfszdimaox Anujc

Condition: used, SIMATIC Panel PC 677 (DC) 12" Key For Weinig Unicontrol Order No. 6AV7801-0AA00-1ACO Serial No. SVPU9007218 PANEL 12" KEY 677/877 Mainboard CV3 with Profibus Cel M370 1.5GHz 400MHz 1MB SLC 256 MByte DDR2 533 SODIMM 40 GByte HDD SATA + DVD-ROM Windows XP Prof. MUI SP2 / 677 Ljdpfx Ansxytnreujac

Condition: used, INFICON Control Panel Module 1000, 200005389 Control panel for INFICON vacuum and leak detection systems. Equipped with a display, function keys, and start, zero, and stop/vent controls. Manufacturer: INFICON Type: Control Panel Model: Module 1000 Item Number: 200005389 Serial Number: 001087 Device Type: Control Unit Display: Integrated display Controls: Start, Zero, Stop/Vent Connection: 25-pin D-Sub connector Country of Manufacture: Germany Lajdpfx Aszdai Sjnuoc Condition: Used

Condition: used, Two-hand operating console for safety-critical machine controls. Designed as a metal housing with an integrated emergency stop and four actuation openings for 22.5 mm control devices. Manufacturer: Siemens Type: 3SU1853-3NB00-1AD1 Product designation: Two-Hand Operation Console Metal Design: Two-hand operating console Lasdpfszdah Ijx Anuec Housing material: Metal Number of actuation openings: 4 Bore diameter: 22.5 mm Integrated emergency stop: included Protection class: IP66 Rated insulation voltage Ui: 500 V Rated impulse withstand voltage Uimp: 6 kV AC switching capacity: 15 A at 400 V DC switching capacity: 13 A at 24 V Frequency: 48–65 Hz Condition: used Location: Kusel Available quantity: 2