Used Continuous-Flow Dryer for sale (10,462)

Condition: used, Year of construction: 2004, Continuous drying machine Manufacturer: Cefla Type: VN 2000/3/7500/300-24 Year of manufacture: 2004 Technical specifications - Total connected power: 23 kW - Usable width of the pallets: 1300 mm - Usable length of the pallets: 7100 mm - Total number of pallets: 24 - Infeed/outfeed speed of the workpieces (adjustable via inverter): 2-20 m/min - Max. workpiece thickness: 200 mm Ledpfx Abez A S Imjzjag - Max. load-bearing capacity per pallet: 150 kg Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Year of construction: 2012, condition: ready for operation (used), An SMT continuous drying system is available. Infeed height range: 850mm-950mm, process chamber length: 12500mm, heating zones: 9, bottom heating zones: 4, heating length: 4500mm, convection section: 4500mm, max. process temperature: 230°C, cooling zones: 12, cooling zone length: 6775mm, cooling units: 3, conveyor type: PTFE belts, conveyor width: 800mm, working width: 800mm, max. speed: 3m/min, top/bottom clearance: 30mm/0mm, exhaust connection diameter: 300mm, machine dimensions X/Y/Z: approx. 13000mm/2000mm/2350mm, weight: approx. 7200kg. Documentation available. An on-site inspection is possible. Ljdpfx Aoznx H Nsbzoag

Condition: ready for operation (used), Year of construction: 2020, operating hours: 50 h, functionality: fully functional, Continuous dryer / laboratory machine Lodpfx Absxhxmvozoag Continuous dryer with infrared heating element (LEISTER) Suitable, for example, for furniture, moulding, or window construction The system was purchased for measuring drying times. Transport (crawler transport) consisting of chain drive with supporting trays Feed via frequency inverter, 1–10 m/min. Passage width: max. 300 mm

Year of construction: 2021, condition: ready for operation (used), A continuous drying system ESC for printing use is available. Heating chamber: fan type: TRZ 250-3, length: 2000mm, recirculated air volume at 510Pa: 3400m³/h, max. temperature: 80°C, heating capacity: 18kW. Cooling chamber: fan type: TRE 250-3, length: 2000mm, air volume flow: 3400m³/h. Belt height: 900mm, discharge element length: 500mm, infeed length: 1200mm, zone lengths: 2000mm, system width: approx. 2250mm, total length: approx. 10700mm. Documentation available. An on-site inspection is possible. Ljdpfx Abey E S E Nszsag

Year of construction: 2020, condition: ready for operation (used), A continuous drying system ESC with an integrated UV intermediate module for printing use is available. Heating chamber: fan type: TRZ 250-3, length: 2000mm, recirculating air volume at 510Pa: 3400m³/h, max. temperature: 80°C, heating capacity: 18kW. Cooling chamber: fan type: TRE 250-3, length: 2000mm, air volume flow: 3400m³/h. UV intermediate module: belt width: 1700mm, emitters: 2, max. emitter power: 120W/cm. Belt height: 900mm, outlet element length: 500mm, inlet length: 1200mm, zone lengths: 2000mm, system width: approx. 2250mm, total length: approx. 10700mm. Documentation available. An on-site inspection is possible. Lodpjy E S E Aefx Abzeag

Year of construction: 2023, condition: ready for operation (used), A Kohnle conveyor belt oven is available. Heating length: 1000mm, max. operating temperature: 1120°C, cooling length: 1850mm, throughput speed: 100mm-1000mm/min, channel height: 40mm, conveyor belt width: 110mm, machine dimensions X/Y/Z: approx. 5000mm/650mm/1350mm, control: Simatic HMI. Including ammonia splitter, data logger, nitrogen curtain at the front and rear and an additional pot conveyor. Documentation available. On-site inspection is possible. Expected to be available from March 2025. Laedpfxsvuafke Abzjg

Condition: ready for operation (used), Year of construction: 2017, operating hours: 26,000 h, functionality: fully functional, machine/vehicle number: M5427F3D01, Flow MACH 500 4020 DWJ Waterjet Cutting Machine Manufacturer: Flow Model: MACH 500 4020 DWJ Year of Manufacture: 2017 Technical Specifications Working area: 4,000 × 2,000 mm Dynamic Waterjet (DWJ) taper compensation cutting head UltraJet 60,000 PSI intensifier pump Abrasive waterjet cutting system Abrasive sludge extraction system Approx. 26,000 operating hours 380–480 V, 50/60 Hz, 3 Phase CE marked Machine Description A well-maintained Flow MACH 500 4020 Dynamic Waterjet cutting system in good working order. The machine is currently installed and can be inspected under power. The Dynamic Waterjet head provides automatic taper compensation, producing highly accurate components with excellent edge quality while reducing secondary finishing operations. Suitable for cutting a wide range of materials including: Stainless Steel Mild Steel Aluminium Titanium Copper & Brass Plastics Composites Glass Stone Ceramics The machine is fitted with an UltraJet 60K intensifier pump and an abrasive sludge extraction system, making it suitable for continuous production environments. Condition Regularly maintained throughout its working life Fully operational Demonstration available by appointment Service history available on request Included Flow MACH 500 4020 Waterjet System Dynamic Waterjet Cutting Head UltraJet 60K Intensifier Pump Lasdpozhkmusfx Abzeg Abrasive Delivery System Abrasive Sludge Extraction System Location: Ireland Price: On Request The machine is available immediately. Further photographs, videos, maintenance information and machine demonstrations can be provided upon request.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 198 kW (269.20 HP), Plastic squeeze dryers / Agglomerators are a vital part of plastic film washing lines. Lajdpfx Abowg Sgcszeg Washed films retain up to 40% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer/Agglomerator is a must to dehydrate the washed film and increase the density of recycled film and fibre material. This also will increase the capacity of the extrusion process and further refine the quality of final plastic pellets. Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would be uneconomic to agglomerate on a conventional batch agglomerator. By redusing the moisture so significantly the productivity of the extruder and quality of pellets is increased exponentially. The latest development for drying and simultaneously agglomerating washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the resultant squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying where materials are still in lightweight flake form, and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids on entry to the dryer, to output dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders saving more energy, as the materials are so dry and dense they can be fed direct to extruders for pellet production. With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Condition: like new (used), Year of construction: 2017, operating hours: 56 h, functionality: fully functional, total length: 1,976 mm, total width: 974 mm, total height: 1,500 mm, pressure (max.): 13 bar, noise level: 70 dB, nominal flow rate: 240 m³/h, The machine is in like-new condition with only 54 operating hours! Submitting a bid obligates the buyer to collect the machine on the following dates: Monday, October 5, 2026, Tuesday, October 6, 2026, Wednesday, October 7, 2026, Thursday, October 8, 2026, until 12:00 PM. The machine is already in storage. The technical data specified in the advertisement comes from a manufacturer's data sheet. The seller does not guarantee the accuracy of the data. Ljdpezzmw Nsfx Abzoag TECHNICAL DETAILS Operating pressure max.: 13 bar Pressure setting range: 4–13 bar Volume flow: 22–66 l/s Volume flow: 1.3–4.0 m³/min Volume flow: 47–140 cfm Sound pressure level: 70 dB(A) MACHINE DETAILS Motor power: 22 kW Dimensions (L x W x H): 1,976 x 974 x 1,500 mm EQUIPMENT Elektronikon Graphic control system Oil-free, water-injected screw compressor ISO 8573-1 Class 0 VSD speed control Further technical data can be found in the attached data sheet.

Condition: like new (used), Year of construction: 2021, Kaeser Secotec TE 142 Refrigeration Dryer YOM 2021 Serial number: 149-8393351 16 Bar 3-60 degrees C Refrigerant R513A Flow rate: 14.50 m3/min - 14500 l/min Total width: 712 mm Lasdpeyy U I Nofx Abzsg Total length: 982 mm Total height: 1,612 mm Overall weight: 249 kg Kaeser compressed air dryers ensure dry, optimal compressed air for all flow rates. Built as high-quality industrial machines, they reliably protect your system and processes from condensation damage, even under extreme conditions.

Condition: as good as new (ex-display), Year of construction: 2023, Briefly stated: Base axis (X): 1.3-2 mm Ljdohw Nfqjpfx Abzeag Outrigger (Y): 1.3-4 mm Accuracy: 0.06 mm Technical data Linear axis accuracy: ± 0.1 mm/m Maximum travel speed: 10 m/min Acceleration: 0.02 g Repeatability: ± 0.06 mm Circular accuracy: ± 0.1 mm Z-axis stroke: 180 mm Base axis (X): 1.3 m, 3 m, 4 m Outrigger (Y): 1.3 m, 2 m Equipment and accessories Maintenance packages UltraPierce1 drilling guide Splash guard1 FlowTexturing (FTT) Abrasive slurry system ecoFlow FlowNest* FlowXpert* Laser pointer Clamping and tensioning system Deionized water conversion kit * Required for FlowTexturing

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 22100304, total length: 10,900 mm, total width: 2,840 mm, total height: 1,142 mm, overall weight: 4,000 kg, Equipment: documentation/manual, No reserve price – guaranteed sale to the highest bidder! Through-feed dryer including exhaust ducts (each approx. 7.5 m) in double-walled stainless steel design! MACHINE DETAILS Max. solvent throughput: 5.00 kg/h Air and exhaust specifications Pipe diameter: 150 mm Exhaust air volume: approx. 900 m³/h Temperature: max. 180°C Pressure loss: max. 100 Pa Fresh air volume: approx. 1,800 m³/h (Σ) Dimensions & Weight Lodex Arq Depfx Abzeag Dimensions (L x W x H): 10,900 x 2,840 x 1,142 mm Total weight: 4,000 kg Input voltage: 400 V Input current: 22 A EQUIPMENT Documentation/manual Exhaust ducts (double-walled stainless steel version, each approx. 7.5 m)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Process components: Air heater, deflection rollers, feed modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, Ledpfezw Apgjx Abzjag 7 exhaust stacks (height up to approx. 17.6 m) Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW th, installed electrical power 690 kW el. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow at the dryer outlet is 1,081,000 m³/h. Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the opening of the exhaust duct and the dryer. The dryer is designed for an outside temperature down to -40°C, the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The working platform of the dryer is located on approximately 8.00 m high steel supports and is enclosed with thermally insulating sandwich panels. A hall or other production components can be inserted under and between the supports (see under Documents, Steel Structure). The system has been disassembled and stored by an experienced assembly team, and this team can be arranged for transport and reassembly. Please note: We are selling exclusively this belt dryer and no other parts! Please direct your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much!

Condition: new, Year of construction: 2025, Ex-display model available immediately: COMPRESSED AIR REFRIGERANT DRYER ALMIG ALM-DGO 78 Model: ALM-DGO 78 Flow rate: 1.30 m³/min* Year of manufacture: 2025 Constant pressure dew point of +3°C to +5°C for maximum process reliability. Minimal pressure drop ensures immediate energy savings. Lajdpfx Absz Dwtdjzsg Short start-up and response times guarantee rapid availability. Optimized heat exchanger design for maximum efficiency. Robust construction for reliable continuous operation. R513a refrigerant: efficient, environmentally friendly, and long-lasting. Compact footprint for space-saving installation. Max. operating pressure: 16 bar Max. inlet temperature: 70°C Min./max. ambient temperature: +5°C to +50°C Pressure drop: 0.14 bar Average power consumption: 0.29 kW Voltage/Frequency: 230V/50Hz Compressed air connection: 3/4" Dimensions (L x W x H): 364 x 432 x 486 mm Weight: 21 kg Convenient leasing options via our partner bank are available for new machines. Visit our showroom / retail store.We always stock a large selection of new and used compressors!

Condition: like new (used), Year of construction: 2002, machine/vehicle number: 54, functionality: fully functional, pressing force: 60 t, table width: 1,100 mm, table length: 3,000 mm, The machine is in like-new condition! Submitting a bid obligates you to pick up the machine on the following dates: Monday, October 5, 2026, Tuesday, October 6, 2026, Wednesday, October 7, 2026, and Thursday, October 8, 2026, until 12:00 PM. The machine is already in storage. TECHNICAL DETAILS Punching force: 60 t Lajdpfx Aezzny Sobzjg Table size: 1,100 × 3,000 mm EQUIPMENT Setup operation Automatic operation Continuous operation Wiring diagrams Operating manual

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PSP-26001, pressure: 0.4 bar, total width: 500 mm, total length: 500 mm, total height: 1,950 mm, overall weight: 75 kg, warranty duration: 3 months, manhole location: bottom, empty load weight: 50 kg, input voltage: 230 V, machine base height: 250 mm, type of input current: AC, volume flow: 0.15 m³/h, Equipment: documentation/manual, type plate available, Continuous-flow pasteurizer (throughput volumes depend on operating time, hygiene, and precision): • Performance and investment suitable for small on-farm dairies as well as local processing workshops: 700 liters in 6 hours. • Base of 50x50cm, 200cm high. Removable side guards. • Gravity-fed milk flow: provides stable flow and smooth regulation. The milk or juice is fed or pumped into an intermediate container at a height of 4 meters and flows from there to the bottling station. • A pump supplies this container at the elevated height. It also ensures effective cleaning through intense detergent circulation. • Manual control by the operator at the bottling station with alarms for "too fast" filling (incomplete pasteurization) or "too slow" filling (product overheated): the operator can then slow down or speed up the bottling process. • No contact with air: Hygienic and precise processing! • Only 2.2 kW of electricity to pasteurize more than 120 liters per hour (700 liters per day). Automatic control of the water bath temperature with a setpoint between 70 and 92°C (from thermization at 65°C to "cooking" for yogurt at 85°C). • The basic pasteurizer consists of: 1. a heat exchanger between the incoming (cold) milk (or juice) and the pasteurized milk (or juice) (72°C), 2. a heating tank (2.2kW, temperature adjustable to 5°C above the pasteurization setpoint) in which a coil is immersed, through which the liquid exiting the heat exchanger circulates, 3. a well-insulated holding tube where the milk/juice is kept for 15 seconds at the pasteurization temperature, 4. a temperature controller to illuminate a light if the liquid is too cold and another if the liquid is too hot, 5. a tube leading to the elevated inlet container, tubes connecting all components, one or two tubes with a Mohr clamp for manual filling of bottles (optional bottling unit) or jars (one at a time), 6. a drain valve at the lowest point (after pasteurization and holding, and before returning to the heat exchanger): allows the circuit to be emptied down to the last drop of pasteurized product. 2. Transfer pump with controls: • Prevents the need to transport milk or juice by pumping it from where it is located (tank on a trailer, refrigerated tank, receiving tank, container, etc.) to the inlet tank of the pasteurizer on the upper floor. • Automatic pause when the inlet tank of the pasteurizer is full (conductivity probes). Automatic restart when the level drops. • Performance between 8 and 25 liters per minute (depending on the height difference). • Also ensures powerful cleaning of the entire pasteurization circuit. • Food-grade design and materials. • Electrical consumption of 400 W. Ledjzg Dlbjpfx Abzoag • Option: 200µm basket filter for wort, juices, and herbal extracts with moderate alcohol content. 3. Option: "Manual gravity-fed bottling unit with automatic stop, 180 liters per hour": twice the throughput with less work!

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, operating hours: 15,396 h, pressing force: 173 t, stroke length: 500 mm, overall weight: 16,000 kg, working length: 4,250 mm, Equipment: CE marking, full service history, No minimum price – guaranteed sale to the highest bidder! TRUMPF TruBend 5170 including BendMaster! The machine has been continuously serviced and maintained by Trumpf, with a complete service record. The cylinders are leak-proof and have no oil loss. The tools shown for the robot are included. TECHNICAL DETAILS Stroke: 500 mm Press force: 1,700 kN Working length: 4,250 mm Tool clamping: Hydraulic, top and bottom Number of axes: 6 Load capacity: 60 kg MACHINE DETAILS Voltage: 3 x 400 V Rated current: 41.0 A Frequency: 50 Hz Connected power: 28.0 kVA Control voltage: 24 V DC Follow-up time: max. 90 ms Follow-up distance at 220 mm/s: max. 10 mm Follow-up distance at 160 mm/s: max. 8.5 mm Operating pressure: max. 300 bar Weight: 16,000 kg Operating hours Press beam running time: 15,396 h Hydraulic system running time: 83,212 h Machine operating hours: 152,638 h EQUIPMENT CE marking Documentation/Manual Rear stop with sensors CNC crowning Bendmaster (robot with 8 m travel) Vacuum manipulators CNC gripping station Double sheet detection BendGuard laser safety device Laedpfxjzzkvcs Abzsg Spare parts: Cable carrier, spare vacuum plate, BWF fixators (machine feet) The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If collection is not completed within the specified timeframe, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data comes from the original offer. No guarantee is given for typographical or measurement errors. In case of doubt, please compare the information with the provided photos or inspect the goods on-site before the end of the auction.

Condition: excellent (used), Year of construction: 2022, IES screw compressed air units supply a continuous, reliable flow of compressed air directly to the point of use without requiring a dedicated room. The ECB – SCB range, made according to high quality standards, uses components by leading companies on the market, ensuring reliability and traceability. 7.5 KW 8 Bar 1000 lts/min Very low running hours - 1351 run hours Lodpfx Aboxaxr Nezsag Complete with three filter set

Year of construction: 1988, condition: ready for operation (used), A powder tower system, a chimney and a burner for the food industry or the milk processing industry, in particular for the production and drying of milk powder or similar products, are available. 1) Tall form dryer SPX Flow APV, type II K, year of construction: 1988, water evaporation capacity: 1000kg/h, products: MPC 80/MPC 85/WPC 60/MCN 85. Components of the powder tower system: drying tower, two collecting cyclones with rotary conveyors, feed cyclone, buffer tanks, lift inlet preheater, homogenizer, vibration filter, control cabinet with frame construction and two atomizer and nozzle systems. 2) Steel chimney Fűtőker, year of construction: 2022, diameter 1/2: 800mm/600mm, height: 20500mm. 3) Weishaupt WM-G20/3-A burner, year of construction: 2014, documentation available. On-site inspection is possible. Lajdpfx Asvmq Tiebzog

Year of construction: 2006, condition: ready for operation (used), A Flow Europe CNC waterjet cutting system is available. Working dimensions X/Y: 3600mm/2000mm, continuous operating pressure: 3800bar, pump type: Flow HyPlex 50, operating hours: 4342, major pump maintenance at: 4102h, control system: Flow Master-PC, module version Path/Cut/FlowNest: 6.0. Including clamping and fixturing device, Flow setup and positioning aids with laser pointer, light barriers, sand silo, Flow mixing unit, water softening system, new pump maintenance kit, various spare parts, and all piping and cables. The collision sensor has a defect. Documentation vorhanden. An on-site inspection is possible. Lajdpfxezka Imo Abzsg

Condition: like new (used), Year of construction: 2012, Atlas Copco CD 70+ adsorption dehumidifier YOM 2012 Capacity: 4,200 l / min Pressure dew point: -40 ° C Pressure drop: 0.16 bar Lajdpsyzaamsfx Abzeg Maximum operating pressure: 14.5 bar Filter sizes: DD / PD 60 - DDp 60 Weight: 120 kg Dimensions: 550 (L) × 364 (W) × 1479 (H) mm inlet air temperature: 35 ° C ambient temperature: 25 ° C operating pressure: 7 bar

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, FLOW & THERMAL Regenerative Thermal Oxidizer (RTO), 18,000 Nm³/h (2021) Complete industrial system for the treatment of process water containing Volatile Organic Compounds (VOCs), consisting of stripping columns and a three-chamber Regenerative Thermal Oxidizer. Manufactured by Flow & Thermal Solutions / TECAM in 2021, the equipment was installed at a PET production plant and remained operational until the factory closed on 27 November 2025. The system removes VOCs from the water by means of air stripping and subsequently destroys them in the RTO through high-temperature thermal oxidation. Heat recovery through ceramic media helps reduce natural gas consumption. Main features • Manufacturer: Flow & Thermal Solutions / TECAM • Year: 2021 • Serial number: F002 • RTO nominal capacity: 18,000 Nm³/h • Configuration: three-chamber regenerative RTO • Fuel: natural gas • Honeywell / Eclipse TJ 200 burner • Burner output: 58–586 kW • Electrical supply: 400 V, 50 Hz • Electrical power stated on the nameplate: 40 kW • 30 kW Soler & Palau ATEX main fan • Siemens PLC automation with HMI touchscreen • LEL monitoring, purge, dilution, bypass and pneumatic valve systems • Vertical stack: 10 m high, diameter: 800 mm Ljdozvcknspfx Abzsag • CE marked Performance and operation The equipment operated at actual flow rates close to its nominal capacity, with recorded values ranging from approximately 16,400 to 17,900 Nm³/h. The latest available emissions test, carried out by DEKRA in December 2023, recorded the following values: • TOC: 13 mgC/Nm³ • NOx: 3–4 mg/Nm³ • CO: 125–153 mg/Nm³ During the tests, the equipment operated at an approximate temperature of 775–780 °C, with a treated water flow rate of 3.5 m³/h. Stripping columns The system includes: • Original stripping column, designed for approximately 6 m³/h. • Second Tecnium SLFKK9 stripping column, manufactured in PPH, with a nominal capacity of 8 m³/h and a maximum capacity of 10 m³/h. The second column was installed, but it is currently dismantled and lying on the ground after being knocked down by strong winds during the winter. It has a hole in the base which, according to the available information, is considered potentially repairable. The Tecnium column is equipped with internal packing, distributors, a mist eliminator, connections, drainage and provisions for integration with the existing control system. Condition and maintenance The system remained operational until the final closure of the plant in November 2025. The latest preventive maintenance was carried out by TECAM in June 2025 and included mechanical and electrical inspection, burner, fans, stripping columns, instrumentation, valves and functional testing. The equipment was operational, although maintenance work is required before recommissioning, mainly involving: • Process valves • Internal insulation of the towers • Ductwork and seals • Main fan impeller and expansion joints • Repair of the base of the second stripping column TECAM technical documentation is available regarding the recommended works, and several spare parts are also available. Scope of supply The system includes: • Three-chamber RTO • Combustion chamber • Burner and gas train • Main fan • Two stripping columns • Dilution and purge system • Hot bypass • LEL analysers • Stack • Ductwork • Electrical cabinets and controls • Platforms, ladders and support structures • Available spare parts

Condition: excellent (used), machine/vehicle number: 00 06 028/00 0026 S, functionality: fully functional, Desiccant air dryer Lsdpfxjyvfkro Abzjag Manufacturer: Motan Type: Luxor LA/8-200 Connection power: 6 kW Dry air flow rate: 200 m3/h Silos for granules: 1 x 150 L 4 x 60 L Material conveying equipment: Manufacturer: Motan Type: HLX-06-1-A000-0 5 units PRICE REDUCTION FROM 7500 TO 6750 EUR!!!

Condition: excellent (used), Year of construction: 2022, operating hours: 339 h, functionality: fully functional, machine/vehicle number: 22016009-T, tank capacity: 60 l, input voltage: 400 V, input frequency: 50 Hz, empty load weight: 470 kg, year of last overhaul: 2022, water tank capacity: 280 l, Equipment: rotational speed infinitely variable, ERBA Turbo 60 W Centrifugal Grinding System – only 339 operating hours, including cascade system and sieve vibrator For sale is our ERBA Turbo 60 W centrifugal grinding system for wet processing. The system was purchased in 2022 but has only been used sparingly since then. With only 339 operating hours, it is in very good used condition. The reason for the sale is that we need the space for newly acquired equipment. Technical data and features: Ledpfx Abjz D Sr Iezoag - Container volume: 60 liters - Turntable speed: continuously adjustable from 0 to 300 rpm - Motor power: 3.0 kW - Operating voltage: 400 V / 50 Hz - Work container and turntable with highly wear-resistant PU lining - Electric tilting device for the processing unit - Dosing pump for liquid process additives - Timer for setting the processing time - Frequency inverter for stepless speed control Accessories included in the offer: - ERBA cascade system: 280-liter tank with three chambers and a circulation pump for the circulation and reuse of the process water. - ERBA sieve vibrator YE 50: Separate sieve unit with a sieve area of 1,385 × 530 mm and a main sieve made of PE. With a discharge for grinding media in the direction of flow, a lateral discharge for small particles, and a frequency inverter for stepless adjustment of the motor speed. A little-used system with extensive equipment for wet lapping. If you are interested, we look forward to hearing from you.

Year of construction: 2018, operating hours: 35,000 h, condition: used, functionality: fully functional, Description of fully automated dryer Major overhauling made by mid 2025 • The housing of the dryer is welded steel construction. The internal floor is made of perfored sheet board. The dryer has an external casing (walls and ceiling) in sandwich panel. • The dryer is driven by hydraulic power pack. • The dryer is equipped with “Ziehl Abegg”, MAXvent axial fans. It's propeller blades are made out of light casted material. One of the most energy efficient product on the market. Hot air generator is equipped with two “Geo Coil’’ heat exchangers. (fully functional but has bent fins) • The control system is equipped with a touch display for operation and visualization of the Dryer. Remote control via PC possible. Incl. web server on the panel for the visualization of drying processes via Ethernet interface. • Working mode according to air exit temperature. The rotational speed of the fans automatically adjusted by the frequency converters so that a desired air temperature level is maintained. Includes pressure measuring devices and extension of control system. • Dryer’s heat carrier temperature approx. 85°C flow temperature and approx. 65°C return temperature. Heat carrier flow defined as 176m³/h • Drying air ventilators equipped with frequency converters • Moisture sensors at the outlet of the dryer: YES • Adjustable height of drying bed: YES Ledpfxjxc Eitj Abzeag • Enlarged fuel receiving bin: Yes General specifications • Infeed material: Wood chips • Size of material: G100 • Water content infeed material max. 45% • Water content outfeed material 7-10% • Designed capacity outlet approx. 1.600 kg/h • Density (wet): 300 kg/m³ • Designed drying surface approx.: 97 m² • Designed climate conditions on site: Ambient temperature 0°C; relative humidity 70%, air pressure: 990 mbar • Noise pressure level, 75 dB, (1 m distance from air inlet port) Dryer fans, installed power: 74 kW Dryer hydraulic powerpack: 15 kW