Used Cleaning Cabin For Components for sale (20,866)

Condition: good (used), Cleaning booth for component cleaning using a high-pressure cleaner. Previously used for cleaning components after 3D printing (e.g., for removing support material). Nwodpfsza T Nksx Ag Isn Operation via foot switch. In good condition.

Condition: used, DYEMANSION Type: POWERSHOT C 2.0 This system has never been put into operation. (like new!!) Dyemansion Powershot C blasting cabinet Gentle cleaning of powder-based plastic components DYEMANSION POWERSHOT C 2.0, Year of manufacture: 2021 The industry standard for simple and efficient powder removal Automated powder removal increases your production capacity With the Powershot C, a medium-sized build volume can be depowdered in just ten minutes. The time required for part cleaning and the personnel in your production can be significantly reduced. This increases your efficiency. By investing in automated powder removal with the Powershot C, up to four manual blasting systems can be replaced. Gentle surface treatment thanks to intelligent hardware functions The blasting cabinet of our Powershot C is equipped with a rotating basket and lined with stainless steel. Different blasting nozzles and ionization ensure reproducible results. A basket with a soft, replaceable lining protects the parts from damage during the process. Two simultaneously operating blasting nozzles are arranged perpendicular to the rotating basket and the parts contained within. This configuration guarantees efficient powder removal. High user comfort with improved ergonomics and process control Experience a new level of process control with a touchscreen and integrated control panel. The Powershot C is operated via a user-friendly interface and pre-installed programs can be started. Individual programs can be easily configured and saved. The user-centered design makes everything easily accessible and safe to operate. Continuous monitoring enables an efficient and reproducible process. Technical data: POWERSHOT C AUTOMATION Individual programming, control and monitoring of process parameters via control panel and touchscreen. PERFORMANCE: Cycle time: Variable from 1 to 40 minutes, typical cycle time 3 to 10 minutes Capacity per cycle: Up to 3/4 EOS P396, 1x HP Jet Fusion 4200/5200 or almost 1.5x full Stratasys H350 build volume Effective volume of the basket 26 liters DIMENSIONS: System (L x W x H) 1700mm x 1310mm x 2030mm Recommended space required in operation (L x W x H) 2500mm x 2915mm x 2300mm WEIGHT: System 480 kg Power: 1kW Requirements 3x400V > 1kW 50Hz 2.5A COMPRESSED AIR: Consumption Minimum: 1.4 m³/min at 2.2 bar Maximum: 1.8 m³/min at 5 bar NOISE EMISSION: Sound level < 80dB(A) Nwodpfx Aezgr T Tjg Ion Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions for you by telephone.

Year of construction: 2013, condition: good (used), functionality: fully functional, machine/vehicle number: 00038-13, For sale is a professional parts cleaning system from the renowned manufacturer Krumm-tec, model RK 30. The cabin enables safe, clean, and ergonomic work during component cleaning and workpiece post-processing. Areas of application & uses: Additive manufacturing (3D printing): Efficient removal of resin and powder residues as well as support structures (SLA, SLS, Polyjet). Conventional mechanical engineering: Degreasing, cleaning, and dust removal of metal and plastic components. Suitable for the use of cleaning media such as water, cleaners, or solvents (e.g., IPA), depending on the model. Features & advantages: Closed, ergonomic housing with a large viewing window and integrated work gloves. Workpiece support made of robust grating. Nwedpfez H H T Sjx Ag Ion Integrated lighting and extraction/filtration system for safe operation inside the cabin. Clean media separation and easy maintenance. Technical data: Manufacturer: Krumm-tec Model: RK 30 Working area (W x D x H): approx. 680 x 350 x 598 mm Max. load capacity: approx. 40 kg Design: Compact table/cabin system

Year of construction: 2014, condition: excellent (used), Professional, pneumatic cleaning booth with dust extraction. It is used in power plants, cement and gypsum factories, mills, and companies involved in mixing, including the chemical industry, as well as in metallurgy, where dust can have a very negative impact on the health of personnel. By using cleaning booths, we prevent the spread of dust and hazardous substances to restrooms, changing rooms, etc. The booth provides personnel with a simple option to clean themselves during work, e.g., before morning and lunchtime breaks, and at the end of the shift. Nodpfx Agjhm E S Ae Iswn Dust extraction unit, EX version. Year of manufacture: 2014 Filtration area: 16 m2 Capacity: 2500 m3/h Negative pressure: 2400 Pa The unit is in very good condition.

Year of construction: 1998, condition: used, Grinder for sharpening FOR TOOLS GRIFO F36 M FOR TOOLS FOR WOOD FACTORY WHIT PUMP HYDRAULIC AND SANDER dividing chain, SAWS, MILLING CUTTERS Nwjdpfx Aeb Umtkog Isn

Year of construction: 1980, condition: used, TAŚMÓWKI FOR FOAM BULLMER WERK 7759 Location Gorzow Wielkopolski. Conditions of delivery Pick your own Cost of delivery Client cover startup type negotiated Description Comments Nodpfx Agecr Ru De Iswn MACHINE FOR CUTTING UPHOLSTERY FOAM ENGINE 1 kW, 220/380 VOLT, HAS A NOSE-STONES TO SAW TAPE LENGTH WITHOUT END 4050 mm, cutting width 1100 mm, table length 2250 mm, table width 1170 mm

Condition: like new (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: INOX 99L, total length: 550 mm, total width: 450 mm, total height: 400 mm, overall weight: 100 kg, Ultrasonic cleaning is a gentle cleaning method based on intense cavitation caused by ultrasound. The microscopically small cavitation bubbles created on the surface of the object to be cleaned cause powerful pressure shocks that effectively remove all contaminants not belonging to the object without damaging the object itself. Ultrasound removes dirt, grease, and impurities from many places that are impossible to reach with other cleaning methods, such as bores, cavities, and channels. Because of this, it is perfectly suited for items that are nearly impossible to wash. Using ultrasound, you can clean engine parts, electrical components, diesel injection pumps, motorcycle radiators, hospital equipment, chemical industry equipment, differentials, motorcycle crankcases, engine cylinder heads, bicycle gears, weapons, and their parts. In addition, it can be used to clean any items made of rubber, glass, metal, ceramics, or electronics. However, make sure it is suitable before washing, e.g., eyewear. To achieve a good cleaning result, we recommend using a specially designed cleaning solution in the machine. The liquid can also be just water and a little dish soap (e.g., Fairy) or another suitable solution. As a cleaning fluid, you can also use vinegar, heating oil, hydraulic oil, solvent cleaners, etc. The process can be accelerated further by raising the temperature of the liquid. Nedpfx As Afp Upog Iewn Features: • LED display for temperature and time • Stepless adjustment of ultrasonic power • Built-in generator • Wheels underneath for easy movement • Drain valve for the tank Technical information: • Ultrasonic frequency: 28 kHz • Ultrasonic power: 480-1500 W • Heating power: 3000 W • Temperature adjustable between: 20-95 °C • Timer digitally adjustable between: 0-99 min • Tank size: 550 x 450 x 400 mm • Tank volume: 99 l

Condition: new, Year of construction: 2025, overall weight: 230 kg, water tank capacity: 110 l, Workshop Cabin Washer, constructed from stainless steel AISI 304 and acid-resistant steel AISI 316, designed for professional use in various industries and automotive applications. It is used to remove heavy dirt without damaging the surface of the cleaned element. Operates in a closed-loop system at temperatures up to 45°C. The working table width is 150 cm. The washer is equipped with a 110-liter tank that can be optionally thermally insulated to prevent the heated fluid from cooling too quickly. Cleaning efficiency is enhanced by our proprietary XPOWER Active Cleaner fluid, which, combined with the appropriate temperature and pressure from the spray gun nozzle, effortlessly removes all kinds of dirt. Standard equipment includes a high-pressure lance up to 140 bar, a compressed air gun, and a low-pressure overflow brush. The washer chamber is pneumatically lifted, with adjustable height, bright lighting, and air ventilation for the window to ensure user convenience. The design and construction of the Master Cleaner MC 1500 adhere to the highest quality standards, ISO 9001, and environmental protection standards, ISO 14001. It is ideal for removing dirt from steel, cast iron, and aluminum surfaces. The Master Cleaner MC1500 is equipped with a dedicated oil separator that effectively removes oil contaminants from the water in the washer’s tank. EQUIPMENT: - High-pressure nozzle: 140 bar - Low-pressure brush: up to 5 L/min - Compressed air gun: up to 8 bar - Air ventilation for the viewing window - LED lighting - Pneumatic chamber opening mechanism - Heated 110-liter tank - Dual liquid filtration system - Oil separator - Liquid level and temperature sensors - Adjustable height feet: up to 100 mm - Dual foot switch - XPOWER Active Cleaner (5L starter pack) OPTIONAL FEATURES: - Rotating basket - Spray arm - Rotary nozzle - Manifold cleaning nozzle - Thermal insulation for the tank Nwedpfjri Rn Ujx Ag Ion TECHNICAL SPECIFICATIONS: - Weight: 230 kg - External dimensions - Open chamber (W x D x H): 175 x 85 x 235 cm - External dimensions - Closed chamber (W x D x H): 175 x 85 x 170 cm - Chamber dimensions (W x D x H): 150 x 64 x 65 cm - Heated fluid tank: 110 liters - Operating temperature: up to 45°C - Power supply: 3 x 400 V - Pneumatic power supply: 6 - 8 bar - Maximum power: 7.5 kW - Operating pump pressure: 140 bar - Dual liquid filtration system: Yes - High-pressure lance capacity: up to 15 L/min - Air connection: Pneumatic quick coupling DN7.2 plug - Manual washing with overflow brush: up to 5 L/min - Dual foot switch: Yes - Safety features: temperature sensor, emergency safety switch, limit switch - Safety rating: IP 54 - Declaration of conformity: CE MULTIPLE MODELS AVAILABLE - CONTACT US TO LEARN MORE.

Year of construction: 2025, condition: new, A workshop cabin washer made of stainless steel AISI 304 and acid-resistant AISI 316, designed for professional use in a broad range of industries and automotive applications. It operates in a closed-loop system at temperatures up to 45°C. Cleaning efficiency is enhanced by our proprietary XPOWER Active Cleaner fluid, which, in combination with the optimal temperature and pressure from the spray gun nozzle, easily removes all types of dirt. Standard equipment includes a compressed air gun and a low-pressure overflow brush. The washer is equipped with a 90-liter tank, a pneumatically lifted washing chamber, and adjustable height for user convenience. STANDARD EQUIPMENT: - High-pressure nozzle up to 140 bar - Low-pressure brush with 5 L/min flow rate - Compressed air gun up to 8 bar - Heated 90-liter fluid tank - LED lighting - Air blower for viewing window - Pneumatic chamber opening mechanism - Sensors for liquid level and temperature - Dual liquid filtration system - Integrated oil separator (effectively separates oil contamination from the water in the washer tank) - Dual foot-operated switches - Adjustable height feet with a range of up to 100 mm - Entirely made of stainless steel - Safety rating: IP 54 - XPOWER Active Cleaner fluid, 5L (two types available) OPTIONAL ADD-ONS FOR THE MASTER CLEANER MC1000: - Spray arm - Rotating basket - Rotary nozzle - Manifold cleaning nozzle - Tank insulation TECHNICAL SPECIFICATIONS: - External dimensions with open chamber (cm): 125 x 85 x 235 - External dimensions with closed chamber (cm): 125 x 85 x 170 Nedpfsgvaazsx Ag Iown - Chamber dimensions (cm): 100 x 64 x 74 - Power supply: 3 x 400 V - Pneumatic system pressure: 6 - 8 bar - Maximum power: 7.5 kW - Pump operating pressure: 140 bar - Fluid operating temperature: up to 45°C - Air connection: pneumatic quick coupling DN 7.2 plug - Safety features: temperature sensor, emergency safety switch, limit switch - Safety rating: IP 54 DIFFERENT MACHINE VARIANTS AVAILABLE CONTACT US TO LEARN MORE ABOUT THE OTHER MODELS.

Condition: used, Year of construction: 2018, operating hours: 6,000 h, functionality: fully functional, We are offering this used FOR REC Rotary Shear FX5000 4x90 KW, manufactured in 2018. Make: FOR REC Model: Rotary Shear FX5000 4x90 KW Year of manufacture: 2018 Condition: used Operating hours: 6000 The supply includes: Nwsdpjzf Adgofx Ag Ien - FOR REC FX5000 rotary shear complete with hopper and discharge chute. - Remote control - Electrical control panel with HMI touchscreen and existing connection cables - Hydraulic power unit 4x90 KW complete with oil cooling system and existing hydraulic hoses - Documentation (User Manual, Electrical and Hydraulic Diagrams) - 1 set of spare rotors with new blades installed - Other spare wear and replacement parts If you have any questions or require further information, please do not hesitate to send us a message or give us a call.

Condition: new, functionality: fully functional, power: 55 kW (74.78 HP), Year of construction: 2026, Ball Mill for Powder and Mining Plant: Structure, Function, and Technical Details A ball mill is a key grinding machine widely used in mining, metallurgy, cement, chemical, and powder-making industries. It is designed to grind various ores and other materials into fine powder through impact and attrition between steel balls and the material inside a rotating cylindrical shell. In mining plants, ball mills are essential for ore beneficiation, preparing materials for flotation, magnetic separation, or leaching processes. In powder production, they ensure uniform particle size and high surface area for further processing. Working Principle Nwjdpfx Aoq Nf U Ejg Isn The ball mill operates on a simple yet effective principle: as the cylindrical shell rotates around its horizontal axis, the grinding media (steel or ceramic balls) are lifted along the inner wall by centrifugal force and friction. When they reach a certain height, they fall freely, striking and grinding the material below. This repeated motion causes both impact and abrasion, reducing the material to the desired fineness. The grinding process can be performed in dry or wet conditions depending on the application. Structural Composition A standard ball mill consists of several main components: Feeding part: Equipped with a feeder or screw conveyor to ensure uniform material input. Discharging part: Can be grate type or overflow type, depending on the discharge method. Rotating part: The cylindrical shell made of steel plates, lined with wear-resistant liners. Transmission system: Includes motor, reducer, small transmission gear, and electrical control. Grinding media: Steel balls or ceramic balls of different diameters for efficient grinding. The internal liner design and ball size distribution are optimized to achieve maximum grinding efficiency and minimal energy consumption. Technical Details Typical Specifications: Feeding size: ≤25 mm Discharge size: 0.074–0.4 mm Capacity: 0.65–615 t/h (depending on model and material hardness) Cylinder speed: 18–38 r/min Power: 18.5–4500 kW Liner material: High manganese steel, rubber, or alloy steel Grinding media load: 30–45% of cylinder volume Operating Modes: Dry grinding: Suitable for materials that must remain moisture-free, such as cement clinker, limestone, and quartz. Wet grinding: Common in ore beneficiation, where water or slurry improves grinding efficiency and particle uniformity. Application in Mining Plants In mining operations, ball mills are used after crushing to further reduce ore size and liberate valuable minerals. They are integrated into grinding circuits with classifiers, hydrocyclones, and flotation systems. The ground material is classified by size, and oversized particles are returned to the mill for regrinding. This closed-circuit system ensures consistent product fineness and efficient energy use. Common Applications: Gold, copper, iron, and zinc ore grinding Cement clinker and slag processing Silicate and ceramic powder production Coal and mineral powder preparation Conclusion A ball mill is an indispensable piece of equipment in both powder production and mining beneficiation plants. Its ability to grind materials into fine, uniform particles makes it vital for downstream processes such as flotation, sintering, and chemical reactions.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 400 kW (543.85 HP), Ore Beneficiation Plant for Nickel, Copper, Zinc, Graphite, Gold, Silver, Chrome, Quartz/Silica In today’s competitive mining and metallurgical industry, maximizing ore value is critical. Our state-of-the-art Ore Beneficiation Plant offers a complete solution designed to increase the content and quality of raw ore, transforming it into a marketable product ready for further processing or direct sale. Engineered for a wide range of minerals—including nickel, copper, zinc, graphite, gold, silver, chrome, and quartz/silica—our ore beneficiation plant delivers exceptional performance, efficiency, and reliability. Introduction Mining operations around the world face the challenge of processing ores that are often low in grade and require extensive refinement to be economically viable. Beneficiation—the process of increasing the concentration of valuable minerals—plays a vital role in reducing operational costs, enhancing recovery, and ultimately, ensuring profitability. Our ore beneficiation plant, also known as an ore processing plant or mine dressing plant, integrates advanced technology and robust engineering to deliver an efficient crushing, grinding, classifying, and separation process. Designed to handle a wide variety of ores, our plant is the ideal solution for mining companies looking to optimize their extraction and processing operations. Whether you’re processing nickel, copper, zinc, graphite, gold, silver, chrome, or quartz/silica, our plant provides the versatility and performance needed to meet today’s rigorous industrial standards. ## What Is an Ore Beneficiation Plant? An ore beneficiation plant is a facility where raw ore is processed to improve its quality and increase the concentration of valuable minerals. The plant typically includes several stages of processing: 1. Crushing: The raw ore is reduced in size to allow for more efficient downstream processing. 2. Grinding: Further size reduction to liberate the valuable minerals from the waste material. 3. Classifying: Separation of the ore into different size fractions using screening and hydrocyclones. 4. Separation: Employing various physical processes such as magnetic separation, flotation, or gravity separation to concentrate the valuable minerals. Nwodpfx Ageq Nw Uqj Ijn 5. Dewatering: Removal of excess water to prepare the concentrate for further processing or shipping. This integrated process not only boosts the metal content but also minimizes waste, thereby improving overall cost efficiency and environmental sustainability.

Condition: new, PRICE: 5000 EUR Nsdpfjvtz U Rex Ag Iown Pillar lift for cutter cart Made of stainless steel Lifting weight: 250 kg Dimensions: 1520x1300x2740mm Electrical power: 1.1kW Voltage: 380V 50Hz

Condition: new, PRICE: 5000 EUR Mobile lift for cutter cart Made of stainless steel Nwodpevtzzkjfx Ag Ijn Lifting weight: 200 kg Dimensions: 1160x800x2900mm Electrical power: 0.75kW Voltage: 220V 50Hz

Condition: new, Year of construction: 2026, CORMAK DI325 – Compact Dry Ice Cleaning Machine The CORMAK DI325 is a compact and modern dry ice cleaning machine designed for effective removal of dirt from machinery, molds, tools, production components, and technical surfaces. It is an ideal solution for companies looking for an efficient, clean, and safe cleaning method without the use of chemicals, water, or abrasive materials. The main advantage of the DI325 is its compact design and high mobility, which clearly distinguish it from many larger and less convenient machines available on the market. This makes the machine suitable not only for production facilities, but also for servicing, maintenance, field work, and any application where convenient transportation and quick setup are important. The machine uses dry ice pellets with a diameter of 3.0–8.0 mm and allows precise adjustment of operating parameters to suit the type of surface being cleaned and the level of contamination. Adjustable operating pressure and dry ice feed rate enable effective cleaning of both delicate components and more demanding industrial surfaces. Key Advantages Compact design for easy transportation and use in different locations, high mobility and convenient operation, effective cleaning without chemicals or water, non-abrasive cleaning that does not damage the treated surface, adjustable operating pressure, adjustable dry ice feed rate, quick setup and preparation for operation, ideal for industrial, service, and technical applications. Applications The CORMAK DI325 is suitable for applications including: cleaning machinery and production equipment, removing dirt from molds, tools, and components, cleaning metal and technical components, service and maintenance work, cleaning surfaces without the need to dismantle multiple components, removing deposits, grease, process contamination, and production residues. Njdpfx Aszwfuljg Ijwn Included Equipment You receive a brand-new CORMAK DI325 dry ice cleaning machine, ready for operation with dry ice pellets, equipped with: CORMAK DI325 machine, a set of nozzles in various shapes and sizes, accessories required for operation according to the selected configuration. Different nozzle shapes and sizes allow the working stream to be adapted to the type of component being cleaned and the specific working environment, increasing the machine's versatility in everyday use. Technical Specifications Technical specification Value Power < 550 W Power supply 230 V AC, 50 Hz Air consumption 0.8–3.0 m³/min Pneumatic supply pressure 0.4–1.0 MPa (4–10 bar, adjustable) Dry ice feed rate 0–0.75 kg/min (adjustable) Dry ice hopper capacity 5 kg Weight 55 kg Dry ice pellet size 3.0–8.0 mm Drive system Direct drive Machine dimensions (L × W × H) 580 × 420 × 650 mm

Condition: as good as new (ex-display), Year of construction: 2005, ACCEPTANCE OF SELF feed head is held on the guides of hardened cylindrical surface and additionally treated grinding. Three-phase motor power 3HP 2800 rpm / min. Output frontal saw blades with cutting heads. Feed discs cost of delivery SEMI AUTOMATIC DOUBLE MITRE SAW Technical Data Right head displacement by means hand wheel Reading of the cutting dimension on high precision metric scale with micrometric adjustment Sliding of the moving head by means of ricirculating ball bearings on rectified and tempered guides Radial sliding of the sawing group Full protection of the sawblades by means of safety hoods with automatic closing Pneumatic heads tilting at 90°/+ 45°/-45° Possibilty to mount sawblades Ø 500 - 530 - 550 mm 2,2 Kw (3 HP) 3 phase motors - 2800 r.p.m. Sawblade shaft Ø 30 mm Cutting lenghts 4000/5000/6000 mm Working pressure 7 bar Overall dimensions 524-624-724x139x155 cm Weight 1200 - 1350 - 1500 Kg Standard Equipment Horizontal pneumatic clamps Automatic lubrication by means of nebulizer Air filter Air gun Service spanners Optionals Reading of the cutting dimension on digital display Turning vertical clamps kit Pneumatic central support Manual central support Right head in feed roller conveyor Semi-automatic reduced cut modification c/w in feed roller conveyor Vee notch device for PVC profiles Micro-spray nebulising device Pneumatic support for long bars Njdsb Rnv Sepfx Ag Iewn cover customer Startup type negotiated Description Notes Saw 2 a head for precision cutting of aluminum profiles GAMMA. Precise double miter saw for serial production of blanks at an angle of 90 ° and 45 °. Convenient and safe execution of multiple cutting operations. Automatic positioning of the moving cutting head. Automatic positioning of the moving cutting head. Adjustable stroke discs. The angles of inclination of the cutting head 45 °, 90 °, easy pneumatically. Intermediate angles are adjusted manually using the bumper and angular scale. LENGTH OF CUT = 4000 5220 x 1390 x 1460 mm Weight 1200 kg.

Year of construction: 2019, condition: good (used), Aluminum cylinders with diameters of 140 mm and 90 mm, wall thickness 5 mm; a clamping ring secures the 50 mm shaft stub, which is turned down to 45 mm; shell length: minimum 2720 mm, maximum 2800 mm. 27 pieces of 90 mm diameter cylinders, 6 pieces of 140 mm diameter cylinders. Price applies to the total quantity. Nwjdjy Nc H Espfx Ag Isn

Condition: good (used), Tranklein BP bookbinding press for pad/block pressing The machine is in very good condition, fully functional, and ready for production. Nwsdpfez S Utlsx Ag Ijn Power supply: 380V. Fast operation. Hydraulic power unit. Format: 340 x 260 mm. Stack height: 820 mm. Adjustable pressing force, max. 2500 kg. Weight: 250 kg. Mounted on casters for easy movement.

Condition: good (used), Bramidan MC16 baler for waste paper Machine in perfect condition, like new. Purchased from storage; practically unused. Ideal for baling paper, waste paper, PET, plastic film, clothing, general waste, etc. Description: – Compact design, requiring minimal workspace – Bale weight: 250 kg – Large top-loading opening for waste – Two-chamber system – Intuitive control panel – Automatic piston return after the compression cycle – Maintenance-free hydraulic system – Easy bale removal thanks to an integrated ejection system – Bale-tying system Power supply: 380V, 50 Hz Pressing force: 16t Max. bale dimensions: 1100 x 800 x 700 mm Njdpsz S Uniefx Ag Iown External dimensions: 2540 x 1210 x 2570 mm Power: 4 kW Weight: 1220 kg Made in Denmark.

Condition: good (used), Year of construction: 2010, machine/vehicle number: 235654, Offer 26284 Technical data: - Inverter DC welding machine for MIG-MAG – Pulse – Standard – and - E-hand (stick) welding - Welding current 330 A 25% ED - 250 A 60% ED - 210 A 100% ED - Welding current continuously adjustable from 5 to 330 A - Wire diameter steel – stainless steel – AL 1.0 / 1.2 mm Nwodpfx Age Afwylo Ijn - Program control M3-10 with 4 main welding programs - Digital display for welding voltage, current and parameters - Adjustable parameters: wire feed speed m/min, welding voltage correction - Dynamics, wire burn-back time, gas post-flow time, etc. - Wire feeder Drive 4 L P with 4-roller drive and program control - Roller wire feed continuously adjustable 0.25 - 24 m/min - 2-cycle + 4-cycle regulation + special functions, spot welding - Water-cooled hose pack approx. 4 m - Ground cable - Pressure regulator - Intermediate hose pack machine – separate wire feeder case 5 m - Connection 400 V - Space required approx. W 500 x H 1350 x D 1050 mm - Weight approx. 200 kg

Condition: like new (used), functionality: fully functional, machine/vehicle number: 94447285, Year of construction: 2023, lifting height: 4,000 mm, chain length: 4,000 mm, load capacity: 500 kg, lifting speed: 75 mm/s, fine lifting speed: 18 mm/s, power: 0.49 kW (0.67 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, For sale is a like-new, immediately ready-for-use Demag electric chain hoist, including a matching aluminum track (3.8 m), trolley, and a professional Demag wireless remote control. The system was manufactured in June 2023 and is in excellent, well-maintained condition. Nwsdszxg T Ejpfx Ag Ion Technical data (chain hoist): Model: Demag DC-COM 5-500 (1/1 H4 V4.5/1.1) Year of manufacture: 06/2023 Load capacity (SWL): 500 kg (0.5 t) Hook travel / chain length: 4.0 m (4000 mm) Lifting speeds: 4.5 m/min (main speed) / 1.1 m/min (fine lifting speed) Motor power: 0.49 kW / 0.10 kW Operating voltage: 3 ~ 380–415 V / 50 Hz Protection class: IP 55 Features & scope of delivery: Demag electric chain hoist with chain and load hook Aluminum track (length: 3.8 m) including trolley Demag wireless remote control (handheld transmitter) for precise and wireless operation Including the corresponding charging unit/power supply and connection cable Ideally suited for workshops, warehouses, or assembly workstations where precise and safe lifting is required. Inspection is possible by arrangement.

Condition: good (used), Automatic cloth rewinder for offset printing machines Nwedpfx Aez R Ir Eog Ien Manufacturer: Vliesstoff Kasper Very good condition. 380V power supply, foot pedal control Device suitable for B1 and B2 format machines

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Complete beer canning line for beer (standard 330 and 500 ml can): 10 000 cans per hour (500ml), fully optimized and calibrated. Only 4 machine operators/workers in filling process. The offer includes: Depalletization, rinser, filles, seamer, RTG level inspection, dryer, carton machine, palletization, CIP, flas pasteurization Padovan, HGB,chiller, compressor etc. Nwodpfx Asuq Sb Sjg Ijn

Condition: good (used), Conveyor belt for waste removal guillotine, three-knife, automatic die-cutter Production Germany Nsdpsz N Sfmjfx Ag Iswn Working width 52 cm, conveyor belt length approx. 300 cm. Discharge of scrap from under the machine directly to the container.

Condition: ready for operation (used), Year of construction: 1968, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Tool diameter: approx. 760 mm MACHINE DETAILS Manufacturer: Bihler Type: RM-35 Machine number: 7765 Year of manufacture: 1968 Length: 1,300 mm Nsdpfx Ao Ad Hg Tog Iswn Width: 900 mm Height: 1,800 mm Weight: 1,000 kg (?) EQUIPMENT