Used Blowing Machine Sidel for sale (65,596)

Condition: used, Speed: 8.000 bph with 0,5 liter bottle. Different formats are possible optionaly. Dismanteling is made by Seegräber GmbH on begining februar 2018. List of machines included: Bodpfx Aozx Ay Uscnoll -SIDEL SBO 6 Blowing machine. Completly overhault by SIDEL in 2006. -Preform magazin and preform elevator Compressor, cooling, moulds not included

Condition: like new (used), functionality: fully functional, machine/vehicle number: SBO 6/10, Sidel Stretch Blow Moulding Machine Max. output: 6.000 bottles/hour. Max. bottle size: 3.000 cc. Blow stations: 6. Machine is in very good conditioning and well maintained. GENERAL INFORMATION The SBO 6/10 has 6 molds and 10 heating modules. Will work with a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel 2-step ^PET stretch-blow molders require previously manufactured preforms be supplied to the machine. Separating the bottle manufacturing and preform manufacturing processes allow production to be optimized, provide greater flexibility of operation and use, and provide higher production output rates and yield. MAXIMUM PREFORM DIMENSIONS Neck height 9 – 41 mm (measured from bottom of support ring) Minimum inside diameter of neck 19 mm Maximum outside diameter of neck 34 mm Preform support ring diameter 29 – 51 mm Maximum preform length 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter 130 mm Maximum bottle height 380 mm Bottle capacity 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (non carbonated and carbonated liquids) 0.25 liter bottle 14-20 grams 0.50 liter bottle 20-33 grams 1.00 liter bottle 26-40 grams 1.50 liter bottle 35-51 grams 2.00 liter bottle 44-58 grams 3.00 liter bottle 68-84 grams BLOW WHEEL Height 3.5 meters Number of molds 6 Closing force 10 tons Item height (under neck) at outfeed 1.4 meters approximately Machine DC drive motor power 4 KW HEAT CONDITIONING Height 2 meters Number of oven heating units 10 Number of heating zones per unit 8 Maximum power 170 KW ELECTRICAL USAGE Maximum supplied power 200 KW Average consumption 100-150 KW/hr (varies per bottle being produced) COMPRESSED AIR Supplied power from 7-35 bar Pressure 7 bar Flow rate 50-100 Nm3/hr (varies per bottle being produced) Blow pressure – champagne base up to 25 bar Blow flow rate – champagne base 110-550 Nm3/hr Blow pressure – petaloid base up to 35 bar Blow flow rate – petaloid base 155-770 Nm3/hr CHILLED WATER Temperature 10-12 degrees Centigrade Pressure 5-6 bar Flow rate up to 6 cubic meters/hour Kcal to be removed up to 16,000 Kcal/hour WEIGHT Blow wheel with molds 8 tons Heat conditioning unit 2.2 tons Preform feeder 0.65 tons Electrical cabinet 0.85 tons PREFORM HEAT CONDITONING The preforms are transferred neck up to the heat conditioning device. This unit continuously insures the preforms are inverted before passing, neck down, in front of the heating units and then inverts them again. During the heating phase, the preforms are rotated and their necks protected from the heat in order to optimize the distribution of heat without deforming the neck. Heating is insured by 10 heat modules. Each unit can accommodate up to 8 infrared lamps stacked horizontally whose ends are air cooled. The heating power of 8 zones, corresponding to the 8 rows of lamps, can be controlled in order to optimize the heat profile. These zones are regulated on all SBO Models. After heating, a control by infra-red camera of preform temperature enables regulation of the zones under control, thus insuring maintenance of the required temperature. Blsdpsg Ailcsfx Acnel

Condition: new, Parts for the SIDEL blow molding machine bearings O ring nozzle Bsdpfx Acsiqum Ijnoll strap sealing axis

Condition: used, Year of construction: 2000, machine/vehicle number: SO142, Used MAGIC MOD. MGL5 blow molding machineTechnical Specifications & Performance DataThis extrusion blow molding machine is engineered for producing hollow plastic containers with consistent quality and reliability. Configured with a single carriage and single head, it is tailored for medium-format containers up to 5.0 liters, offering robust performance for industrial packaging applications. The machine has undergone a major overhaul and is in perfect working order, both mechanically and electronically.Maximum container volume: 5.0 LMachine type: Extrusion blow molding, single carriage, single headClamping force: 83 kNHydraulic working pressure: 160 barBlow nozzle pressure: 0–70 barExtruder screw diameter: 70 mmExtruder motor power: 29 kWExtruder heating power: 10.6 kWHead heating power (single head): 3.4 kWMaximum die diameter (single head): 120 mmMold opening stroke: 210 mmMaximum mold dimensions (W – Thickness – H): 400 / 2×110 / 400 mmHydraulic pump/Power unit motor: 18.5 kWInstalled power (total): 62 kWAverage electrical consumption: 40 kWBlowing air pressure: 6–8 barAir consumption: 800 Nl/minCooling water pressure: 2–3 barCooling capacity (water): 30,000 Kcal/hHydraulic oil tank capacity: 270 LMachine footprint (W × L × H): 2200 × 4250 × 2900 mmComplete system weight: 7000 kgModel code: MGL5Advanced Automation & Control SystemsThe machine is equipped with a new Gefran PLC, delivering updated electronic control and a modernized program to ensure repeatable cycles, reliable temperature regulation, and stable extrusion. Multi-zone temperature management covers the extruder and head heating, providing precise control over melt conditions and wall thickness quality. Operator-friendly diagnostics support fast setup and streamlined troubleshooting, while integrated interlocks and status monitoring promote safe, efficient operation. The control architecture supports consistent processing of HDPE with accurate setpoint management, alarms, and real-time process visibility.Production Line Integration CapabilitiesDesigned for straightforward integration into industrial packaging and used bottling line environments, the machine features a part discharge belt conveyor for clean outfeed handling. It can be paired with downstream trimming, leak testing, visual inspection, and packing systems to create a complete second hand production cell. Format compatibility focuses on containers up to 5.0 liters, with a structure well-suited for HDPE bottles, jerrycans, and similar industrial packaging formats.Machine Condition & Maintenance HistoryThe unit is reported in excellent condition and fully oper... Blsdozrgp Tspfx Acnjl

Condition: used, Year of construction: 2006, Overview This SIDEL SBO 2 XL Compact is a two-cavity PET stretch blow moulding machine built in 2006 for large-format containers of up to 10 litres. It pairs a Sidel preform tipper, hopper and feeder with a Sidel Compact linear oven with 5 heating modules and a blowing station for two moulds. Output depends on bottle size: approx. 2,400 bottles/hour at 500 ml, approx. 2,000 bottles/hour at 5 litres and approx. 1,000 bottles/hour at 10 litres. The machine is currently set up for preforms with a 48/41 neck finish and last produced 8-litre PET bottles. Its hour counter reads approx. 12,500 hours. It ran in a plastics converting plant until March 2026 and was then dismantled by skilled technicians and stored dry. Large-format blow moulders of this size are rarely offered on the second-hand market. Moulds are not included. Technical data - Manufacturer: SIDEL - Model: SBO 2 XL Compact - Year of manufacture: 2006 - Machine type: PET stretch blow moulding machine - Bottle size range: approx. 2.0 to 10.0 litres - Current bottle format: 8 litre PET - Current neck finish: 48/41 - Mould stations: 2, block moulds - Moulds: not included - Oven: Sidel Compact linear oven - Heating modules: 5 - Output at 500 ml: approx. 2,400 bottles/hour - Output at 5 litres: approx. 2,000 bottles/hour - Output at 10 litres: approx. 1,000 bottles/hour - Operating hours: approx. 12,500 h Bodpfx Acozxtzisnsll - Control: Siemens SIMATIC touchscreen HMI Equipment - Sidel preform tipper - Sidel preform hopper and feeder - Sidel Compact linear oven with 5 heating modules - Sidel blowing station for 2 moulds - Sidel electrical cabinet - Sidel drive panels with Siemens touchscreen control - Safety enclosure with transparent guard panels - Electrical and mechanical drawings, service and maintenance manuals, spare parts books Condition Used - good working condition. The machine was serviced by Sidel and by in-house technicians under a regular preventive maintenance schedule, and ran in production until March 2026. It is now dismantled and stored dry and can be inspected in stored condition. Availability Immediately. Location: France. Ready for loading and shipment.

Condition: used, Year of construction: 2000, Overview  This PET blow-moulding machine was manufactured in 2000 by French company SIDEL. The machine is currently in good working condition, running in production until the end of November 2025. It will be dismantled and craned out through the roof, with craning scheduled for December 2025. It becomes available after dismantling. Blsdpfx Acsyb Tbpsnsl Technical data - Capacity: - 7,600 bph on 1.0 L - Formats: - Neck finish 29/21 - Preforms processed: RPET Plastipak & Resilux - Number of moulds: - 6 (moulds not included) - Equipment & Features: - Quick change for shell molds - Sidel caterpillar oven - 6 heating modules - Sidel preforms tipper - Sidel preforms hopper & feeder - Sidel preforms infeed rail - Sidel caterpillar oven & blowing wheel - Solenoid valves Sidel Universal type - Sidel PCC version V2.02 - Sidel CE electrical cabinet (Siemens) - Service history: - Sidel maintenance completed September 2024 - Elongation sensor retrofitted - Additional service by client’s technicians Scope of Delivery  - Stretch blow-moulder SIDEL SBO 6 Series 2 - Preforms tipper - Preforms hopper & feeder - Preforms infeed rail - Caterpillar oven & blowing wheel

Condition: used, Year of construction: 1992, Overview This blowmoulder was built in 1992 from French manufacturer Sidel. It can produce up to 4.000 bottles per hour. Techn. Details Capacity: 4.000 bph 4 cavities Scope of delivery Blowmoulding machine | SIDEL | SBO 4/6 | 1992 Preform feeder Two types of molds for 1.5 L and 2.0 L bottles Cooling unit: RIEDEL Blodpfxenpbhvs Acnel

Condition: used, Year of construction: 1998, Overview This machine was built in 1998 by French manufacturer Sidel. The machine is in very good working condition, is already professionally dismantled and stored in a warehouse. It is already packed in seaworthy export crates. Techn. Details Bledpfx Aorkgy Ujcnol - Capacity: 7.200 bph in 1,5L - Number of moulds:  6 (molds not included) - Equipped with quick change for shell molds - Number of heating modules: 10 modules - Neck personalization: 29/25      - Working hours: 47.000 only         - Machine was regularily maintained       - Retrofitted by the previous owner in 2020 - Machine equipped with:            - Sidel preforms elevator to unscrambler - Sidel preforms unscrambler & feeder - Sidel oven & blowing wheel for 6 molds - Sidel electrical cabinet - Sidel PCC drive & control panel - Big set of spare parts list upon request

Condition: new, Year of construction: 2025, operating hours: 150 h, functionality: fully functional, power: 35 kW (47.59 HP), Automatic PET Blow Molding Machine – 4 Cavities – 3,500–4,000 bottles/hour Automatic PET preform blow molding machine with automatic feeding system, suitable for bottles up to 0.6 L. Technical specifications Number of cavities: 4 Production capacity: 3,500–4,000 pcs/hour Maximum bottle volume: 0.6 L Bsdpfx Aoyhh Nuocnjll Neck diameter: 38 mm Maximum bottle diameter: 65 mm Maximum bottle height: 230 mm Heating system: 35 lamps Average power consumption: 22 kW Low-pressure air consumption: 1,600 L/min Blowing pressure: 25–35 kg/cm² High-pressure air consumption: 2,500 L/min Chiller included Cooling capacity: 5,600 kcal/h Water flow: 30 L/min Dimensions & Weight Dimensions (L × W × H): 3.70 × 1.95 × 2.10 m Weight: 3,700 kg The machine is supplied with an automatic preform feeding system and chiller. Suitable for high-output production of PET bottles and containers up to 600 ml. For additional technical information, availability, price or further details, please contact us.

Condition: used, Year of construction: 2019, functionality: fully functional, clamping force: 2,500 kN, total width: 12,500 mm, total length: 11,500 mm, total height: 8,600 mm, power: 831 kW (1,129.84 HP), Equipment: documentation/manual, For sale is a highly automated BBM 2500 CoEx3 extrusion blow molding machine, manufactured in 2019. The machine is in very good technical condition, fully functional, and immediately available. An inspection while the machine is running can be arranged by appointment. The machine is designed for the economical production of large-volume HDPE hollow bodies and sophisticated technical blow-molded parts. It is a batch-type 3-layer extrusion blow molding machine with a parison accumulator head. The offered scope of supply includes: - Piovan GMS-160 high-performance plastic granulator, manufactured in 2023 - Piovan VM 500 extraction system - GWK/Technotrans cooling unit The listed peripheral components are included in the offer price. If individual components or the entire range of accessories are not required, they can be removed from the scope of supply, and this will be taken into account when determining the price. Technical key data: Manufacturer/Model: BBM 2500 Year of manufacture: 2019 Process: CoEx3 extrusion blow molding with parison accumulator head Material: HDPE Design: 1 station with 1 CoEx3 blow head 3 extruders: 1 × 130 mm and 2 × 70 mm Total output: up to 1,200 kg/h Accumulator volume: 1 × 20 l and 2 × 7.5 l Electrical wall thickness control Clamping force: 2,500 kN Platen area: 2,160 × 2,400 mm Bsdjzw D Haopfx Acnell Column spacing: 1,500 × 2,400 mm Opening width: 600–1,500 mm Electrical closing movement Locking via 6 hydraulic power strokes 2 integrated KUKA 6-axis robots for removal and handling Fully automatic KOCH material feeding system with gravimetric dosing and mixing Beckhoff TwinCAT control with Siemens components and drives Connected power: 831 kW Power supply: 400 V, 3 phases/N/PE, 50 Hz Dimensions: approx. 11,500 × 12,500 × 8,600 mm (L × W × H) CE documentation and machine manuals available The machine is particularly suitable for large-volume hollow bodies, technical molded parts, infrastructure products, sanitary parts and industrial containers. Availability: immediate Inspection and trial run: possible by prior appointment

Condition: used, Year of construction: 2009, machine/vehicle number: SO144, Technical Specifications & Performance DataThe SIPA SFR 8 is a rotary PET stretch blow molding machine designed to form PET bottles from preforms for beverage production and industrial packaging applications. Manufactured in 2009, this machine provides a stated production capacity of 12,400 bottles per hour. Its rotary architecture supports continuous bottle production and is suitable for integration into a used bottling line where consistent container supply is required ahead of filling, capping, labeling and secondary packaging equipment.Manufacturer: SIPAModel: SFR 8Year of manufacture: 2009Production capacity: 12,400 bottles per hourBlow mold configuration: 4 mold sets with 8 cavities eachPreform neck finish: 28mm / 1881 short neckSupported bottle formats: 0.5L, 0.75L and 1.5LContainer material: PETAdvanced Automation & Control SystemsThis rotary stretch blow molder is intended for automated PET bottle manufacturing, transforming heated preforms into finished containers through the stretch-blow molding cycle. The supplied preform feeding system supports controlled preform handling into the machine. Rotary blow molding equipment is typically operated through coordinated process controls that synchronize preform transfer, heating, stretching and blowing stages.The machine is supplied with its preform feeding system and chiller. These components support a more complete blowing package by providing preform infeed capability and process cooling. The high-pressure compressor is excluded, so compressed-air infrastructure must be planned as part of installation and commissioning.Production Line Integration CapabilitiesThe SIPA SFR 8 can operate as the bottle production stage of a PET used bottling line. It is positioned upstream of filling monoblocks, labeling machines, shrink wrappers, handle applicators and palletizing systems, producing PET containers for onward handling in a beverage production line. The available mold sets provide flexibility for 0.5L, 0.75L and 1.5L bottle formats, subject to the installed mold and associated line setup.The supplied preform feeding system supports integration with preform handling equipment. A preform hopper is not included, allowing the buyer to configure a hopper solution according to site layout, autonomy requirements and preform logistics. The 28mm / 1881 short-neck finish should be matched with compatible preforms, closures and downstream filling equipment.Machine Condition & Maintenance HistoryThe machine is described as being in very good condition and regularly maintained by the manufacturer. It remains operational until September 30, 2026, indicating that it is currently in production rather than stored or decommissioned. This operating status gives prospective buyers the opportunity to evaluate the machine as part of an active production environment before dismantling.Planned dismantling and loading will follow the end of operation. Buyers should arrange site assessment, technical verification and transport planning in coordination with the removal schedule.Operational Performance & VersatilityDesigned specifically for PET bottle manufacture, the S... Bsdpfxoztwmfs Acnsll

Condition: used, Year of construction: 1998, Overview This SIDEL SBO 10/14 Series 1 is a rotary PET stretch blow moulding machine with 10 blowing stations, producing up to 12,000 bottles per hour. It has been used for the production of 1.5 L and 2.0 L PET water bottles with PCO 1810 neck finish. The machine is still installed and in production, can be visited in operation, and is available for immediate sale. Technical data - Manufacturer: SIDEL Bsdpfxjzrhr Ao Acnoll - Model: SBO 10/14 Series 1 - Machine No.: 688 - Year of manufacture: 1998 - Machine type: rotary stretch blow moulding machine for PET bottles - Blowing stations: 10 - Capacity: up to 12,000 bph - Formats: 1.5 L and 2.0 L PET bottles - Neck finish: PCO 1810 - Installed power: 310 kW - Electrical supply: 400 V / 470 A Condition Used - in production, still installed and under power. The machine remains a reliable solution for water, beverage and other PET packaging applications. Availability Immediately available. Location: Slovenia. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: used, Year of construction: 2012, machine/vehicle number: SO141, Used MORETTO EPL 5-8 N blow molding machine - Year 2012Technical Specifications & Performance DataThis extrusion blow molding machine is engineered for producing hollow plastic containers with high repeatability and efficiency. Manufactured by Magic with a full-electric drive concept, it is equipped for industrial packaging and beverage production environments where precision, uptime, and energy efficiency are critical. It suits used bottling line upgrades and second hand equipment integrations requiring robust blow molding capabilities.Blow molding process: Extrusion blow molding, full electricMaximum blown container volume: 8000 cm³Clamping force: 100 kNSpeed: around 200 Unit/hour for ( Distilled water container ) Dry cycle time: 2.2 sOpening stroke: 250 mmMaximum mold dimensions (L × P × A): 425 / 2x130 / 400 mmGeneral electrical power: 15 kWTotal installed electrical power: 64 kWExtruder screw diameter: 70 mmExtruder L/D: 24 L/DExtruder motor power: 35 kWExtruder heating zones: 5Extruder heating power: 10.6 kWSingle extrusion head max die diameter: 100 mmHead heating zones: 4Head heating power: 3.8 kWMachine footprint (W × L × H): 1900 × 5050 × 3250 mmTotal system weight: 7000 kgNoise level: 75 dB(A)Advanced Automation & Control SystemsThe full-electric architecture enhances precision and repeatability while minimizing energy consumption and maintenance compared to hydraulic systems. Fast dry-cycle performance supports higher throughput and stable cycle times. Temperature control across multiple heating zones on the extruder and head ensures consistent parison quality and stable process control for demanding industrial packaging applications.Full-electric drive for efficient, clean operationMulti-zone temperature management on extruder and die headStable, repeatable dry cycle for consistent productionOperator-friendly adjustments and setup for mold changesProcess reliability suitable for stringent quality requirementsProduction Line Integration CapabilitiesThis machine integrates smoothly within a used bottling line or a mixed-manufacturer production environment. It comes with a comprehensive set of auxiliaries to streamline upstream and downstream handling, supporting end-to-end beverage production or industrial packaging workflows.Included auxiliaries: hopper feeders, suction unit, dryer, granulator, cooler, color mixer, conveyorsAuxiliaries brand: Moretto (most components purchased new in 2012)Inline or standalone operation for flexible layoutsSupports diverse container geometries enabled by robust clamping and mold size window... Bljdpfxszrgqkj Acnjl

Condition: used, Year of construction: 2000, machine/vehicle number: SO126, Used HDPE Extrusion Blow Molding Machine for 10 L – 300 bph – Overview Second-hand Uniloy Milacron HSM10/D extrusion blow molding machine designed for producing up to 10 L HDPE containers. With a single-parison head and robust clamp, this EBM unit is ideal for industrial packaging and beverage production auxiliaries (e.g., water canisters, edible oils) and can be integrated within a used bottling line. Documentation and manuals are available. Reference number: SO126. Technical Specifications & Performance Data Main data Make/Model: Uniloy Milacron HSM10/D Year: 2000 Technology: Extrusion Blow Molding (EBM), single parison Material: HDPE Number of cavities: 1 Max container volume: 10 L Indicative output: up to about 300 bph on 10 L (application-dependent) Manuals: included Ref. no.: SO126 Extruder Screw diameter: 100 mm; L/D 24 HDPE screw speed: 0–70 rpm Plasticizing capacity (HDPE): approx. 300 kg/h Main extruder motor: 89 kW Heating zones: 6; barrel heating power: 31.4 kW Motor cooling power: 0.58 kW; barrel cooling power: 1 kW Parison head Type: PE 1/200, single parison Max die diameter: 200 mm Head heating power: 14.2 kW Parison thickness control: hydraulic (wall-thickness programming) Clamp & blow unit Clamp force: 200 kN Max mould size: 650 × 500 mm (H) Mould thickness: 2 × 150 mm Mould opening stroke: 300 mm Horizontal carriage stroke: 660 mm Blow pin stroke: 240 ± 5 mm Bljdoyhbt Hopfx Acnel Blow pin thrust at 50 bar: 320 kg Electrical Installed power: 156 kW (average consumption ~104 kW) Supply: 400 V, 50 Hz, 318 A, 3 + N Hydraulic system Reservoir capacity: 400 l Pump flow (1470 rpm): 123 l/min Max pressure (main circuit): 190 bar Main hydraulic motor: 37 kW; oil cooling motor: 1.5 kW Pneumatics Operating pressure (general): 6–8 bar; air use: 2000–2500 Nl/min Post-cooling pressure: 6–8 bar; air use: 1000–1500 Nl/min Cooling water Mould circuit: 8–12 °C; flow 15 m³/h Extruder & hydraulic oil: 10–24 °C; flow 4 m³/h Dimensions & weights Approx. machine size (L × W × H): 7600 × 7700 × 3900 mm Blow unit weight: 7600 kg; Extrusion group weight: 6400 kg Noise level at operator: < 85 dB(A) Advanced Automation & Control Systems Hydraulic wall-thickness programming for precise parison control, improving weight distribution and top-load performance on 10 L containers. Dedicated Uniloy command and control software (version code available in manuals) with operator interface for setpoint management and diagnostics. Integrated temperature control across six extruder zones and heated head for stable processing at up to 300 °C transformation temperature. Interlocked guarding and emergency stops for safe operation. Production Line Integration Capabilities This second-hand extrusion blow molder is integration-ready for downstream equipment typical of a used bottling line and industrial packaging systems: Conveyor...

Condition: good (used), Year of construction: 1976, wire diameter range: a) single wire: 2,2 - 3,8 mm b) double wire: 2,2 - 3,4 mm nail length: 10 - 80 mm output: 300/600 nails/min. Bljded Im Nuspfx Acnel

Condition: used, Year of construction: 2000, machine/vehicle number: SO117, Used HDPE 4+4 Blow Molding Machine TECHNE SYSTEM up to 2700 bphMain Technical Features and Premium UpgradesThis HDPE Blow Molding Machine offers a highly specialized system for blow molding containers made of high-density polyethylene (HDPE). Specifically, this is a TECHNE 4000 T660 manufactured in 2000, which is preserved in an OPTIMAL state of cleanliness and order. Reflecting its meticulous maintenance history, the machine was cleaned daily in the lower section, and completely blown and cleaned once a week, starting from the extruder down to the bottom.In December 2023, the system received a brand-new retrofit consisting of a latest-generation Gefran PLC equipped with a color touch screen, fully customizable functions, and complete machine control via HMI. This upgrade also features a Gefran GFC modem for remote assistance.The machine operates with a 4+4 cavity double head configuration with a 150 mm cavity spacing, handling bottle formats up to 2 liters and producing up to 2700 bottles per hour (bph). This design optimizes production with a symmetrical and highly efficient layout. Furthermore, the system is equipped with proportional hydraulics for movements utilizing Rexroth hydraulics, along with independent control of 8 parisons. It features 8 parisons with independent profiles managed by Moog servovalves, offering precise parison control up to 400 points.The production line comes exceptionally well-equipped with peripheral machinery, including a complete plastic loader kit with a Moretto mixer, a Tria granulator (2022), and a Villani double leak tester (comprising 2 independent leak testers). Additionally, an extensive complete replacement kit is included. These spare parts encompass:All Rexroth proportional movement valves (carriage, nozzles, and molds)All linear transducersCarriage translation columns complete with a full set of bushingsClosing lever equipped with bushings and pinsA Voith hydraulic pumpAll ATOS hydraulic cylindersA brand-new direct current (DC) extrusion motorA brand-new direct current (DC) inverterVarious mechanical parts, heating elements, nozzles, cores, and diesYou can access this machine starting mid-October.Mold Configuration and FlexibilityTo ensure high precision in shaping bottles, the blow molding system provides a cavity spacing of 150 mm. Additionally, the machine includes a double carriage with a 660 mm carriage stroke, which allows you to control the production cycle optimally and minimizes downtime. In particular, this Blow Molding Machine accommodates containers up to 2 liters, giving you significant flexibility in producing various types of packaging. The system supports both straight or inclined blowing (up to 30 degrees), adapting easily to different container geometries.The extrusion system features a 100 mm / 25 L/D extruder equipped with a vertical filter. Although the machine does not include molds in its standard supply, it supports a wide range of mold sizes, up to a maximum capacity of 2 liters. Furthermore, you can easily adapt the entire system to meet specif... Bledpfx Acovgvkasnel

Condition: excellent (used), Year of construction: 2013, operating hours: 200 h, functionality: fully functional, screw diameter: 65 mm, overall weight: 9,000 kg, clamping force: 785 kN, total width: 1,800 mm, total length: 4,500 mm, total height: 3,000 mm, power: 0.045 kW (0.06 HP), We offer for sale a slightly used injection blow moulding machine in excellent condition. It is connected and fully operational for demonstration purposes. We can also offer several ready-made molds for canisters and lamp shades. The machine is designed for use with PMMA, PC, PP, and PE resins. Bedpfx Acothk Rzjnell

Year of construction: 2014, condition: ready for operation (used), functionality: fully functional, X-Floc EM400/440 Insulation Blowing Machine Bledjzlggxspfx Acnel Professional high-performance blowing machine designed for processing a wide range of loose insulation and fibre materials. Suitable for open blowing, dry injection, damp-spray applications and material conveying, it can be used both on construction sites and as part of a stationary production system. The machine is equipped with a large loading hopper of approximately 1,000 litres, capable of holding around 5–6 standard bags of insulation material. Four rotating shredder shafts progressively break up and condition the compacted fibres before transferring them into the rotary airlock. The adjustable airlock feed gate allows precise control of the material flow. Depending on the version and material used, the EM400/440 can reach a processing capacity of up to approximately 1,600 kg/h. The adjustable air system delivers a maximum pressure of 540 mbar, with an air volume of approximately 100–430 m³/h for the EM400 and up to 100–680 m³/h for the EM440. Main features: Suitable for different insulation and fibre materials Two-stage material conditioning system Four high-speed shredder shafts Approx. 1,000-litre loading hopper Adjustable material flow with 10 feed-gate positions Low-dust loading system with transparent strip curtains Connection for external dust extraction Remote adjustment of air and material parameters Robust, low-maintenance industrial construction Easy access to internal components for servicing Direct NW 76 mm hose connection Suitable for mobile or stationary applications The machine can be operated using a cable or optional wireless remote control, allowing the operator to adjust air output, material supply and pressure-control functions directly from the working area. Technical data: Processing capacity: up to approx. 1,600 kg/h Maximum pressure: 540 mbar Hopper volume: approx. 1,000 litres Shredder shafts: 4 Dimensions: approx. 1,285 × 1,000 × 1,800 mm Filling height: approx. 1,250 mm Hose outlet: NW 76 mm EM400 power: approx. 7.5 kW EM440 power: approx. 10.5 kW Weight: approx. 425 kg for EM400 / 445 kg for EM440 Maximum conveying height: approx. 20–45 m for EM400 / 20–60 m for EM440 Optional equipment may include a wireless remote control, pressure-relief valve, internal or external air amplifier, suction drum and dust-extraction system.

Condition: used, functionality: fully functional, T36E bulb blowing machine with furnace Bledpfx Ajzgbd Uocnjl Olivotto Industries is the leader company in the production of blow machines. The T36E electronic blowing machine, faturing blowing machine featuring complete electronic process control is the natural evolution of the mechanical T series and it has been developed mainly for the productionof lighting bulbs in sodalime glass. In addition, the machine can be used for the production of small articles both in sodalime and borosilicate glass. The T36E is equipped with 36 blowing heads and can operate either with 36 or 18 working heads.

Condition: good (used), Year of construction: 1998, operating hours: 89,340 h, functionality: fully functional, screw diameter: 90 mm, overall weight: 16,000 kg, clamping force: 650 kN, total width: 2,750 mm, total length: 5,600 mm, total height: 3,200 mm, Manufacturer: Sterling Model: 15 LBS Bodszfxwiepfx Acnell Year of manufacture: 1998 Operating hours: 89,340 h Closing force: 650 kN Screw diameter: 90 mm BM Sterling APV, year of manufacture 1998 Complete control system replacement in 2008 with MACO-sys 6000, performed by Davies-Standard LTD Net price: 45,000 EUR

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 271/1, overall weight: 700 kg, Semi-automatic PET bottle blowing machine for producing 5-gallon PET bottles. Includes heating and blowing unit. Supplied with 2 sets of 5-gallon blowing molds. Capacity: 60 bottles/hour. Blsdozd Tdujpfx Acnjl

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Equipment: documentation/manual, For sale: Complete PET bottle blowing line TES BluLine4 HiTech MultiFlex (2017) We offer for sale a complete PET bottle production line from the renowned manufacturer TES Sp. z o.o., model BluLine4 HiTech MultiFlex, manufactured in 2017. The machine is in very good technical condition, regularly used, and ready for further operation. Technical data Bodpfszd Sb Sox Acnoll Manufacturer: TES Sp. z o.o. Model: BluLine4 HiTech MultiFlex Year of manufacture: 2017 Bottle capacity range: 0.5 l – 4 l Number of cavities: 2-4 The line includes: ✅ Preform feeder ✅ PET bottle blowing machine ✅ Bottle packer for trays Advantages of the equipment Complete and ready-to-use production line Universal range of produced capacities Solid construction and proven TES technology Very good technical condition Ideal for manufacturers of beverages, water, household chemicals, and other products packaged in PET bottles Price: negotiable. If you have any questions or would like to obtain additional information, please contact us by phone or private message. We will gladly provide detailed information and send additional photos of the equipment.

Condition: new, functionality: fully functional, power: 3.5 kW (4.76 HP), gearing type: automatic, fuel type: electric, color: original, overall weight: 3,500 kg, Year of construction: 2025, operating hours: 1 h, machine/vehicle number: MZatbm01, Equipment: CE marking, This automatic bottle blowing machine that we are introducing to you today, it is a kind of instrumental equipment for plastic bottle production, it can transform plastic granules or pre-made bottle blanks into plastic bottles of various sizes and shapes through an automated process, we can realize any product you make for you. This machine integrates mechanical, electronic and pneumatic technologies and is very intelligent. Whether it is preform loading, heating, stretching, blow molding or finished bottle discharging now only need one of these machines can help you solve, without a lot of human intervention, which not only help you save labor costs, but also help you greatly improve production efficiency and ensure product quality stability. Bljdpfx Acoxx Ndgonsl

Condition: used, Stretch blow molding machine by Etek ISBM line = Injection stretch blow molding Stretch blow molding machine for single-use PET bottles made from PET preforms Stretch blow molding machine for production using the rotary process Bledpfx Acekucxlonol Manufacturer: ETEK / GF-Industries, Type Supra 800 sv 1 Serial number: 22000225 Year of manufacture: 2012 Power: 90 kW Mains connection: 400 volts, 50 Hz Weight: approximately 6000 kg In like-new condition

Condition: used, screw diameter: 35 mm, For sale: SJ35 Single Screw Plastic Extruder manufactured by Zhang Jia Gang Friend Machinery Co., Ltd. A compact and reliable extrusion unit suitable for small- to medium-scale production—ideal for laboratory testing or extrusion of plastic tubes, profiles, or filaments. The machine is fully functional, well maintained, and available for immediate inspection. Technical Specifications Model: SJ35 Manufacturer: Zhang Jia Gang Friend Machinery Co., Ltd. (China) Screw diameter: Ø35 mm L/D ratio: 35:28 Main motor power: 7.5 kW Center height: 1000 mm Gearbox: ZLYJ112 (ratio 16:1, 2017) Heating zones: multiple, each independently controlled Drive: ABB inverter control Hopper dryer and feeder included Electrical supply: 400 V / 3 phase / 50 Hz Condition: fully operational and tested Condition Very good technical and visual condition Equipped with digital temperature controllers and main motor speed control Comes with complete electrical cabinet with ABB inverter and wiring Regularly maintained, all components present Blodpfoxuczqsx Acnol Available for inspection and testing in Ivanka pri Nitre, Slovakia Price €5,000 (negotiable) Ex-works Ivanka pri Nitre, Slovakia Ideal for: - Plastic extrusion of small profiles, tubes, and filaments - Laboratory testing and material development - Educational or pilot-scale production facilities