Used Barbaric Tsret 02 S for sale (71,325)

Condition: used, machine/vehicle number: 006621, Max. panel width: 1500 mm Max. panel length: 2200 mm Length of conveyor: 13500 mm Introduction system: with grippers Lajdpfx Aletvrfgjboh

Year of construction: 2023, condition: new, functionality: fully functional, machine/vehicle number: 2230832-269, Barbaric RTS 02 Professional reverse transfer system with destacking, year of manufacture 2023. Workpiece recirculation with 0 - 90 - 180 degree rotation, part measurement, destacking function including stack construction and manual mode for oversized panels. Composed of a removal station RX U4 B2200, conveyor belt L9000 B800, delivery station Comfort, movable table, dual function, steplessly adjustable conveyor belt, support rollers with double track, portal RTS 6100, safety fences and 2 safety light curtains. Largest part 2800 x 1300 mm, smallest 300 x 80 mm, maximum 60 kg. Pick-up with suction cups, up to 12 cycles per minute, transfer speed up to 120 m/min, stacking height 800 mm. Connection 400 V / 50 Hz, 20 A and compressed air 0.6 MPa. Lasdpjz Ngg Ejfx Albjh

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 The Barbaric TSRET04 return system is a workpiece return unit for edge banding machines. It is the most basic version in the TSRET series and serves the following functions: - Transfers the workpiece at the end of the edge banding machine - Returns the workpiece to the height of the infeed of the edge banding machine Functionality After passing through the edge banding machine, the workpiece moves onto a roller table. The transfer is carried out by belt conveyors moving perpendicularly to the conveying direction, which rise from the roller table, lift the workpiece, transport it sideways, and set it down on a slightly lower roller table. This roller table conveys the workpiece to a belt conveyor. At the end of the belt conveyor, a non-driven, slightly inclined roller conveyor toward the edge banding machine’s infeed is connected. A stopper halts the workpiece at the end of the roller conveyor. Technical data - Max. load capacity: 60 kg - Max. panel size: 2,800 x 1,300 mm - Cycle time: max. 11 pieces/min Lodpfx Alex Rpgbsbjah Dimensions: - Return: 2,293 x 1,961 mm - Conveyor belt (L x W): 2,500 x 800 mm - Roller conveyor (L x W): 2,000 x 800 mm - Total length: approx. 6,943 mm - Total width: approx. 2,239 mm Availability: short-term Location: Flörsheim

Year of construction: 2021, condition: excellent (used), functionality: fully functional, Barbaric Labeling LPS labeling stations, year of manufacture 2021 each equipped with a Godex EZ235I label printer fixed table, suitable for automated warehouses or nesting CNC machines Lasdpfx Aloxy Ad Aebsh

Year of construction: 2021, condition: excellent (used), functionality: fully functional, Labeling stations Barbaric Labeling LPS, year of manufacture 2021 Laodpexy Afajfx Albjh each with Godex EZ235I label printer Belt feed table, suitable for automated warehouses or panel saws

Year of construction: 2025, condition: new, Vacuum lifter BARBARIC, swiveling, including column-mounted slewing crane Equipment package consisting of: - Vacuum lifter uniWood B3-90° - 250 Comfort version, with integrated chain hoist reinforced, lifting capacity: 250 kg Suitable for vertical and horizontal transport of flat, commercially available panels. Vacuum generation is achieved pneumatically via an ejector. For lifting porous materials (MDF with a thickness of more than 8 mm), a reinforced vacuum pump is installed. -- Technical data -- Lifting speed of chain hoist: 0-10 m/min infinitely variable via frequency inverter Lifting height (operating range): 2.0 m Chain length: approx. 3.5 m Operating voltage: 230 V / 50 Hz Operating pressure: 7 bar filtered compressed air required Weight: approx. 85 kg -- Safety system -- The lifter is equipped with a vacuum pressure gauge. Releasing the load using a 2-button function. - Column-mounted slewing crane BARBARIC Load capacity 250 kg on the lifting device Consisting of: Column, console and low-friction jib. Delivery including sliding carriage and power supply. Overall height: approx. 4.2 m Lower edge of jib: approx. 3.5 m Outreach: 5 m Slewing range approx. 250° Manual slewing and trolley movement Base plate with 700 x 700 mm and fastening material. Delivery with adhesive anchor for concrete floor. A suitably reinforced concrete floor is required for this fastening. The static verification of the floor must be carried out on site and documented accordingly. Other versions and lengths available upon request. Laedpfx Aloc Umftsbsh

Condition: used, System: Used decanter / centrifuge Type: KHD S 3-02 Factory number: 9-8531-0-2570 Machine number: 5389 Permissible speed: 2550 Permissible density kg/dm³: 1.3 Drum inside diameter: 650 Drum inside height: 1970 mm Drum wall thickness: 16 mm Drive: Viscotherm hydraulics Material: steel Year of construction: 1994 Total weight: 4400 kg Width: 1960 mm Length: 3630 mm Height: 1300 mm Other: Purchase and rental possible Lodpfx Alevz Ic Rjbjah Optional soundproof housing The system is in good condition.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, clamping force: 1,100 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, displacement volume: 144 cm³, injection pressure: 2,000 bar, injection weight: 132 g, mold height (min.): 350 mm, ejector stroke: 150 mm, Clamping force: 110t Year of manufacture: 2017 Injection shot weight: 132g Injection unit 290 + 100 (2K) Screw diameter: 35 mm Specific injection pressure: 2000 bar Injection volume: 144 ccm Injection shot weight: 132 g Mold clamping unit 1100 Clamping force: 110 t Distance between tie bars: 470 x 470 mm Mold height: 350 mm Opening stroke: 450 mm Ljdpfx Asz Ef N Aslboah Ejector stroke: 150 mm Control: Selogica direct Two-component injection molding machine with a KUKA robot Equipment: - Only ABS and PP were processed - 2nd injection unit EUROMAP 100 vertical (injection into the parting line) - Selogica direct control with a 15" touchscreen - Hydraulics with accumulator (100 l pressure accumulator), injection during mold closing - Control of a hydraulic rotary unit + 3 core pulls - Hydraulic ejector, blow unit - 6 heating circuits for the mold/hot runner - 6-circuit water distribution manifold for cooling - Min. mold height 350 mm, tie bar extension 100 mm, machine raised by 100 mm - KUKA KR6 robot (operated via Selogica) with enclosure

Condition: excellent (used), Year of construction: 2009, operating hours: 78,099 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 25 mm, clearance between the columns: 520 mm, displacement volume: 71 cm³, injection pressure: 1,550 bar, injection weight: 65 g, opening stroke: 925 mm, total height: 2,800 mm, overall weight: 10,700 kg, Equipment: documentation/manual, Arburg 520 S 1600 290/70 2K incl. Multilift H – a well-maintained, fully functional 2-component injection molding machine. The machine comes from a top-notch production facility. According to the operator, machine availability was always a top priority: the system was regularly and carefully maintained and operated continuously with additional oil filtration. It is in very good, operational condition and can be put into operation shortly after connection. Equipment and technical highlights: • Year of construction 2009 • 12.3 million cycles / 78,099 operating hours in automatic mode • 2-component version with horizontal injection unit 290 and vertical injection unit 70 • Injection unit 1: screw diameter 25 mm, max. 71 cm³ • Injection unit 2: screw diameter 18 mm, max. 21 cm³ • Opening stroke 925 mm • Electric rotary table • 12-zone hot runner system integrated • 3 x core pull • 2 x blow-out, including control for needle valve • Interfaces for temperature controllers and dryers • Various customer-specific inputs and outputs Including Arburg Multilift H, load capacity 6 kg: • 2 x vacuum • 5 x double-acting grippers • Z-axis servo, 800 mm • C, G, X, and B axes pneumatic Lajdpfjxzix Asx Albjh • Various inputs and outputs, including gripper monitoring The machine is fully functional. Documentation/manual available. An excellent opportunity for a user looking for a well-maintained and immediately usable 2K injection molding machine with automation.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, 1,0 ST. gebr. Spritzgiessmaschine mit Roboter Laedpfxjz Izqbo Albjh Hersteller: NETSTAL Typ: SYNERGY2400-150 Baujahr: 2008 Schließkraft: 240 Tonnen Holmabstand: 630 x 630 mm Schneckendurchmesser: 70 mm Spritzteilgewicht: 916 g/PS Ausstattung: Kernzüge 3 x DS / 2 x AS Roboter SEPRO

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, 1,0 ST. Gebr. Zwei Komponenten Spritzgiessmaschine das zweite Aggegeat ist seitlich angebaut. Hersteller: NETSTAL Typ: SYNERGY1700 - 110 Baujahr: 2004 Schließkraft: 240 Tonnen Holmabstand: 630 x 630 mm Schneckendurchmesser 1: 70 mm Spritzteilgewicht 1: 916 g/PS Schneckendurchmesser 2: 28 mm Spritzteilgewicht 2: 59 g/PS Ledpfx Alsz Niz Sjbjah Ausstattung: Kernzüge 2 x DS / 1 x AS Zweites Aggregat ist seitlich angebaut

Condition: like new (used), Year of construction: 2020, functionality: fully functional, operating hours: 571 h, For sale is a tandem press brake with working widths of 3 meters and 4 meters, respectively. The two machines can be operated synchronously and in parallel, providing a total working width of 7 meters. Each machine has only been used for 571 hours and 423 hours, respectively, and has been regularly maintained and is fully functional. The machines are being sold due to the closure of the business. Further information is available by phone or email. Lsdoz I Ifxepfx Albjah

Condition: used, functionality: fully functional, machine/vehicle number: H2X386J14012, Year of construction: 2018, operating hours: 5,006 h, load capacity: 2,000 kg, lifting height: 4,620 mm, free lift: 1,350 mm, fuel type: electric, mast type: triplex, construction height: 2,140 mm, empty load weight: 2,900 kg, drive type: Elektro, Electric 4-wheel forklift Chassis number: H2X386J14012 Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Battery year of manufacture: 2018 3rd valve, 4th valve, semi-cabin, Integrated attachment Laedpfx Alozd H Nksbsh

Condition: used, Year of construction: 1970, functionality: fully functional, BARMAG extrusion system consisting of: 1x BARMAG BA KEP 90-26.3-S extruder 1x BARMAG 9E4-11-103/Z transmission gear 1x AEG G 16.04 drive motor with forced ventilation, 460V, 112A, 46.7KW, 3150rpm, rated at 330V, 2.21A 1x SCHOLZ dosing unit, incl. Feed hopper 1x Control unit Laodpfx Alsuakzzsbsh System features: - Single-screw extruder, built around 1970 - Throughput 200 kg/h - Conversion to new screw geometry in 2016 - Screw diameter 90 mm - Screw length 2769.5 mm - Process length 26.3D - Geometry: Feed - Barrier - Mixing section - Screw material: 1.8550, nitrided - DC motor - Technical documentation This system is available in three versions. Subject to prior sale. Please send inquiries via email only. Note: The machine is still installed and can be inspected on site. The buyer must dismantle it and arrange shipping themselves. This is not included in the offer price.

Condition: used, Year of construction: 1997, functionality: fully functional, stack height: 1,000 mm, working width: 1,020 mm, For sale is a very well-maintained FK 102 S model from 1997, featuring pneumatic side guides, a dust removal calender, electronic overlap control, a film cutting device, an Achilles separator, and a Gemser stacker. Lasdpfxez Ai Dno Albeh The machine is suitable for both wet and thermal lamination. Minimum format: 250 x 360 mm Maximum format: 1020 x 1240 mm Material weight: 100-450 g/m²

Condition: excellent (used), Year of construction: 2006, Arburg 370 S 600-290 (2006) Screw ø 35 mm 📐 CLAMPING UNIT Clamping force: 600 kN Closing force: 38 kN Opening force / increased: 24 / 160 kN Opening stroke: 400 mm Mould height min.: 200 mm Daylight max.: 600 mm Distance between tie bars: 370 × 370 mm Platen size: 510 × 510 mm Weight of mov. mould half: 360 kg Ejector force: 125 kN Ejector stroke: 125 mm ⚙️ HYDRAULICS Drive power: 15 kW Ljdpfxjzrv Ire Albsah Total connected load: 23,9 kW 💉 INJECTION UNIT — ø 35 mm Screw stroke max.: 150 mm Effective screw length L/D: 20 Injection volume max.: 132 cm³ Shot weight max.: 20,5 g PS Material throughput max.: 10,5 kg/h PS Injection pressure max.: 2000 bar Injection flow max.: 140 cm³/s Injection flow with accumulator: 430 cm³/s Back pressure max.: 350 / 200 bar Screw speed max.: 54 m/min Screw torque max.: 380 Nm Nozzle contact force: 60 kN Nozzle retraction stroke: 240 mm Heating zones / power: 4 zóny / 5,8 kW Nozzle heating: 0,6 kW Hopper capacity: 50 l 📦 DIMENSIONS & WEIGHT Oil capacity: 135 l Net weight: 3300 kg Electrical connection: 80 A

Condition: excellent (used), Year of construction: 2011, We offer the GROTE S/A-530-2E slicer applicator, an advanced industrial machine for cutting and applying slices directly onto production lines. The device is ideal for meat, cheese, vegetable products, pizza, ready-made sandwiches and convenience food processing plants, where high efficiency, repeatable portion weight and precise stacking of slices in several tracks are required. The slicer allows for both cutting and application onto a conveyor belt as well as bulk cutting, adapting to various technological processes. The machine has been designed as a multi-track slicer/applicator, with the possibility of configuring the number of heads and tracks, the cutting zone, orientation (left- or right-handed version) and the support frame. Continuous product loading with gravity feeding and an optional low-level sensor reduces downtime and maintains high cutting quality. The hygienic design ensures quick and effective cleaning in accordance with food industry requirements. Technical data: Manufacturer: GROTE Model: S/A-530-2E Year: 2011 Machine type: slicer / applicator Product Size: up to 6” (152.4 mm) diameter Slicing Zone: 22”, 30” or 40” wide Slice Thickness: up to .5” (12.7 mm) standard Slicing Zone Widths: 22” (558.8 mm), 30″ (762 mm), or 40″ (1016 mm) Power supply: 200-575 VAC, 50/60 Hz, 3 Phase Dimensions (L x W x H): 2100 x 1200 x 2000 mm Country of manufacture: USA Performance and features: Cutting and application or bulk cutting Up to 150 strokes per minute per track with cutting and application function Up to 120 strokes per minute per track with stack & shingle function (application/fanning of slices) Multi-head and multi-track configuration – can be adapted to specific lines and products Continuous gravity feeding of product, optionally with low level sensor Advantages of the GROTE S/A-530-2E Slicer/ Aplikator High performance and precision – up to 150 strokes/min/track, ideal for large production lines. Accurate positioning of slices – precise application directly onto the production belt in multiple tracks increases product repeatability and aesthetics. Flexible configuration – the height, frame orientation, number of heads and tracks, and cutting zone can be adjusted to suit the requirements of the plant. Simple operation – an intuitive touchscreen panel makes it easy to set cutting parameters and work programmes. Minimised downtime – continuous product loading and gravity feeding reduce changeover time and manual handling. Professional applications – ideal for slicing and applying slices in the production of pizzas, sandwiches, cold cuts, cheeses, vegetarian products and other convenience foods. Ljdpeycf Idjfx Albsah

Condition: good (used), functionality: fully functional, PERSKE Trimming Motor e.g. for milling, grooving, rebating Type: AC-MOTOR 2.5 - 3.6 kW withi 400V 100HZ Motor shaft-diameter: 30 mm Homag-list price (2026): 3,230 EURO (motor only) Lajdpfs Aatu Aox Alboh

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, We are offering this ready-to-use HOMAG KR 79/02/PU/S2 edge banding machine, manufactured in 1993. Manufacturer: HOMAG Type/Model: KR 79/02/PU/S2 Year of manufacture: 1993 If you have any questions or require further information, please do not hesitate to send us a message or call us. Lsdpfxjzwunbe Albsah

Condition: excellent (used), Year of construction: 2007, Window fitting press Ledpfet T Srpsx Albjah

Condition: new, AVENTICS MSC-DA-025-0100-HG-HM-HM-02-M-S-0-0-ACC, Compact Slide, Mini Slide Lodpjlkbngofx Albsah Item condition: New Technical data: Damping: hydraulic Compressed air connection: G 1/8 Stroke: 100 mm Piston diameter: 25 mm Ambient temperature max.: 60 °C Ambient temperature min.: 0 °C Operating principle: double-acting Operating pressure max.: 10 bar Operating pressure min.: 1 bar H1R6A13K22-1_HS 6 kg Find more compact slides – new and used – in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2014, ARBURG A 370 S 700-290 U-Version (S&P 3804) Manufacture year: 2014 Operating hours: 41,257 Stunden Screw: 40 mm Injection pressure: 1530 bar Stroke volume: 188 cm³ Clamping Force: 70 t Tie bar distance: 370 x 370 mm Mould installation height min.: 200 mm Plate distance max.: 600 mm Dimensions: 3700 x 1400 x 2000 mm Lodjz T A I Hepfx Alboah Eeight: 3580 kg Connected load: 15 kW U-Version = clamping and injectionside could be turned into vertical and horizontal position, 1 x corepuller, 6 x hotrunner, Airvalve, Interface colorizing, 23.761 h automatic and 17.496 h manual... Price: on request contact: Mr. Ralf Schulz

Condition: ready for operation (used), Year of construction: 1997, CNC universal milling machine HERMLE UWF 902 - S / Heidenhain 426 -Travel ranges X / Y / Z 600-450-500 mm -Tool holder ISO 40 -Vertical and horizontal milling capability -Heidenhain 426 control system -Electric handwheel -Vertical head with drilling spindle -Coolant system -Tilting table -Machine enclosure -Documentation Dimensions L x W x H 3.9 x 2 x 2 meters / Weight 4000 kg Ljdszz Iupspfx Alboah Subject to errors and omissions.

Condition: ready for operation (used), Year of construction: 2023, pressing force: 224 t, total width: 1,770 mm, total height: 3,000 mm, overall weight: 14,750 kg, product length (max.): 5,250 mm, number of axes: 3, This 3-axis Durma AD-S 40220 press brake was manufactured in 2023. It features a pressing force of 220 metric tons and a bending length of 4050 mm. The machine is equipped with a servo-motor-driven backgauge system and a CNC control unit with a 15" touchscreen. If you are looking to get high-quality bending capabilities, consider the Durma AD-S 40220 press brake we have for sale. Contact us for further details. - Pressing Force: 220 metric tons- Distance Between Columns: 3600 mm- Bending Stroke: 265 mm- Installation Height: 530 mm- Side Column Overhang: 450 mm- Controlled Axes: 3 axes (Y1, Y2, X)- CNC Control Unit: DT-15 CNC CONTROL (15" 2D graphic display, touchscreen, USB ports, PC software, graphical product/tool memory)- Backgauge Drive System: Servo-motor-driven backgauge on linear guides and ball screws- Backgauge Finger Blocks: Double linear guides- Backgauge X-axis Speed: 500 mm/s- Backgauge R-axis Speed: 350 mm/s- Backgauge R-axis Travel: 250 mm- Axis Position Accuracy: 0.01 mm- Y-axis Rapid Traverse: 160 mm/s- Y-axis Working Speed: 10 mm/s- Y-axis Retraction Speed: 140 mm/s- Hydraulic Drive System: Yes- Main Motor Power: 22 kW- Operating Voltage: 400 V- Control Voltage: 24 V- Main Fuse Current / Rated Current: 100 A- Frequency: 50 Hz- Short Circuit Breaking Capacity: 10 kA- Oil Tank Capacity: 250 L- Table Height: 900 mm- Table Width: 104 mm- Safety System: Fiessler AKAS laser safety device mounted on the upper beam- Crowning: CNC-controlled crowning- Upper Tooling: Upper die 1010/A/75°, split and offset- Lower Tooling: 4-V die block 60x60 2009 (V = 16, 22, 35, and 50 mm)- Support Arms: Sheet metal support arms on linear guides- Compliance: CE compliant Technical Specification Lodpfx Aloz D Dhneboah Bending Length 4050 mm

Condition: new, Year of construction: 2019, functionality: fully functional, Nachi EZ03V4-02-4525 Wingslicer robot, new and in original packaging. Ledpfx Alez I N R Njbjah Ceiling mount: EtherCAT Year of manufacture: 01/2019 Repeatability: +/- 0.014 mm Max. payload: 3 kg Max. working range: approx. 450 mm in Z, 250 mm Scope of delivery: Robot, controller, cables, teach pendant, documentation Further details, article numbers, and images available upon request. Price is per item. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Collection on-site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Due to the weight and size of the robot, it can be shipped within Germany for €95 including VAT. Shipping costs to foreign countries upon request – please specify country, city, and postal code. Freight costs upon request – please specify the delivery address.