Used Aro Vwk 31/1-S for sale (107,462)

Condition: used, Cooling unit cooling water cooler ARO type VWK 31/1-S Factory number year of manufacture 2007 Cooling capacity 3500 watts Ambient temperature max. 32°C Refrigerant R407C Refrigerant filling quantity 0.98 kg Operating pressure of cooling compressor max. 29.5 bar Water tank capacity approx. 8 liters Discharge volume of circulation pump 27 liters/min. (1620 liters/h) Water connections quick release coupling Rectus type 26 Power connection 230 volts, 50 Hz, 2.2 kW - Temperature setting via DANFOSS thermostat controller Iiedpfxsvw A T No Am Hsg - Built-in circulation pump (250 watts) Space requirement L x W x H 700 x 550 x 520 mm Weight 75 kg Good condition

Condition: used, mileage: 835,500 km, power: 220 kW (299.12 HP), first registration: 09/2010, fuel type: diesel, number of seats: 31, gearing type: automatic, emission class: euro5, color: white, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis, subject to finalization, errors, typographical errors, and prior sale: Mercedes Benz Citaro NF O530 bus, 31+57+1 (Vehicle No. 316) First registered: September 27, 2010 Iiedpfxjzztrae Am Hjg 835,500 km Engine: 11,967 ccm 220 KW / 352 hp Euro 5 EEV Permissible gross vehicle weight: 18,000 / 20,900 kg Unladen weight: 11,789 kg Payload: 6,211 kg Front axle load: 7,245 kg, Rear axle load: 11,500 kg Overall length: 11,950 mm, Overall width: 2,550 mm, Overall height: 3,400 mm 31+57+1 seats (sitting/standing/wheelchair/stroller) Ramp at the second double door for strollers and wheelchairs Air conditioning, heating, auxiliary heater Double doors at the front and rear Microwave Fully automatic transmission LAWO (system) No cash register Radio/CD Electric windows Emergency exit Electric mirrors + mirror heating Engine slightly oily, air dryer malfunction, air dryer cartridge needs to be replaced, various signs of wear and tear, consistent with its age Not a new vehicle, the vehicle was in regular service until it was deregistered Full air suspension Full automatic Tires: 275/70R22.5, front approx. 40/80%, rear approx. 30/30%, inside approx. 40/40% Price: €7,500.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the Ludwigslust District Court; for disputes exceeding this value, it is the Schwerin Regional Court. Subject to errors, typographical errors, and prior sale.

Condition: used, mileage: 861,837 km, power: 220 kW (299.12 HP), first registration: 09/2010, fuel type: diesel, number of seats: 33, gearing type: automatic, emission class: euro5, color: white, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis until completion of the sale, subject to errors, typographical errors, and prior sale: Mercedes Benz Citaro NF O530 Bus 31+57+1 (Vehicle 311) First registration: 20.09.2010 861,837 km Engine: 11,967 ccm 220 KW / 352 HP Euro 5 EEV Permissible gross vehicle weight: 18,000 / 20,900 kg Unladen weight: 11,789 kg Payload: 6,211 kg Axle load front: 7,245 kg, axle load rear: 11,500 kg Overall length: 11,950 mm, overall width: 2,550 mm, overall height: 3,400 mm 33+57+1 seats (sitting/standing/wheelchair/stroller) Ramp at the second double door for strollers and wheelchairs Air conditioning, heating, auxiliary heater Double doors front and rear Iodpfjzztq Aex Am Hsig Microwave Fully automatic transmission LAWO system No cash register Radio/CD Electric windows Emergency exit Electric mirrors + mirror heating Engine slightly oily, display indicates battery charging failure, carbon brushes on one alternator defective, second alternator charging Various signs of wear, consistent with age Not a new vehicle, was in regular service until deregistration Full air suspension Fully automatic system Tires 275/70R22.5, front approx. 40%, rear approx. 30/30% Price: €7,500.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties is the Ludwigslust District Court for disputes up to a value of €10,000, and the Schwerin Regional Court for disputes exceeding this value. Subject to errors, typographical errors, and prior sale.

Year of construction: 2010, condition: ready for operation (used), A complete turning line for the production of drive shafts, consisting of a Lang-Laru cut-off and centering machine, three EMAG lathes with robot automation, conveyor peripheral equipment and measuring station, is available. 1) End machining machine Lang-Laru DHZ 03/1250-RR-S, year of manufacture: 2010, tool stations: 2x12, loading: Kuka robot/EWAB conveyor, machine dimensions X/Y/Z: approx. 8600mm/3000mm/4100mm, weight: approx. 15000kg, control: Siemens Sinumerik 840D. 2) 3x vertical shaft turning centers EMAG VTC 250, year of manufacture: 2010, loading: Kuka robot/EWAB conveyor, max. turning length: 630mm, max. swing diameter over bed: 140mm, max. workpiece weight: 20kg, spindle bore: 52mm, speed: 5000rpm, tool stations: 2, tool holder: VDI40, machine dimensions X/Y/Z: approx. 8100mm/3300mm/4300mm, weight: approx. 14000kg, control: Siemens. This is a complete turning line with peripheral equipment and automation. Documentation available. An on-site inspection is possible. Iisdpfxjzfp Hhs Am Hsg

Condition: used, mileage: 831,933 km, power: 220 kW (299.12 HP), first registration: 09/2010, fuel type: diesel, number of seats: 31, gearing type: automatic, next inspection (TÜV): 08/2026, emission class: euro5, color: white, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, In accordance with our “General Terms and Conditions,” without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis, subject to finalization, errors, typographical errors, and prior sale: Mercedes Benz Citaro NF O530 Bus, 31+57+1 (Vehicle No. 312) First registration: September 27, 2010 831,933 km Engine: 11,967 ccm 220 kW / 352 hp Euro 5 EEV Permissible gross vehicle weight: 18,000 / 20,900 kg Unladen weight: 11,789 kg Payload: 6,211 kg Axle load front: 7,245 / 7,250 kg, axle load rear: 11,500 / 13,000 kg Overall length: 11,950 mm, overall width: 2,550 mm, overall height: 3,400 mm 31+57+1 seats (sitting / standing / wheelchair / stroller) Ramp at the second double door for strollers and wheelchairs Air conditioning, heating, auxiliary heater Double door at the front and rear Microwave Fully automatic transmission LAWO Without cash register Radio/CD Electric windows Emergency exit Electric mirrors + mirror heating Malfunction of the level adjustment, various signs of wear and tear, commensurate with age, engine with oil leaks, etc. Not a new vehicle; was in regular service until deregistration. Iiedpfezztq Nox Am Heg Full air suspension Fully automatic system Tires 275/70R22.5, front approximately 40/40%, rear approximately 40%, front steering axle approximately 30/30% Price: €7,500.00 (net) All information is provided without any guarantee or warranty. Our “General Terms and Conditions” apply. The place of jurisdiction for both parties for disputes up to €5,000.00 is the local court of Ludwigslust; for disputes exceeding this amount, it is the regional court of Schwerin. Subject to errors, typographical errors, and prior sale.

Condition: good (used), Year of construction: 1988, 1 used hydraulic sheet metal shearing machine Manufacturer: LVD Type: HSL 31/6 Year of manufacture: 1988 Technical data: Max. cutting length: 3100 mm Max. sheet thickness in ST 45: 6 mm Adjustable cutting angle: 0.5 - 3 mm Iiedpfozv D Eysx Am Hsg Motor power: 7.5 kW Supply voltage: 380 V Length: 3500 mm Depth: 2200 mm Height: 2250 mm Weight: 4600 kg Equipped with: Rear stop, motor-adjustable up to 750 mm Angle stop Foot switch

Condition: used, Year of construction: 2019, CNC control, control, axis control -Control: Item DS0013373-1 -Type: unfortunately no further type and manufacturer designation -Individual components/connectors: see photos -Number: 2x control available -Price per piece -Dimensions: 250/120/H70 mm Isdpfx Aotra U Ujm Hoig -Weight: 1.4 kg/pc.

Condition: good (used), Year of construction: 1994, Pressure: 250 t Throat depth: 360 mm Table size: 1250 x 630 mm Table diameter: 250 mm Ram clamping surface: 850 x 450 mm Iijdpfxjz Ai Aws Am Hsg Installation height: 800 mm Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Total power requirement: 20.5 kW Machine weight approx.: 8 t

Year of construction: 1987, condition: ready for operation (used), An EHT hydraulic guillotine shear refurbished in 2023 is available. Cutting length: 3000mm, max. sheet thickness steel/VA: 4mm/2mm, backgauge: 10mm-1000mm, adjustment speed: 180mm/s, stroke rate: 18-31 strokes/min, oil volume: 160l. Machine dimensions X/Y/Z: approx. 3700mm/2100mm/2150mm, weight: approx. 4800kg, operating hours: 44024h. The cylinders, blades and hoses were overhauled in 2023. On-site inspection is possible. Iedpfewrhwuex Am Hoig

Condition: used, Year of construction: 2006, machine/vehicle number: 1624, Item No. 26248 Technical specifications: - For sheet metal with 4 sides, diameter up to approx. 1200 mm - For sheet metal with 8 sides, diameter up to approx. 1500 mm - Overhang of the knife head: 240 mm Iijdezxc Hzjpfx Am Hsg - Overhang of the guide arm: 900 mm - Max. cutting capacity at 45 Kp/mm²: 4.0 mm - Drive speed, infinitely variable: 6 to 30 m/min - Manual material clamping + manual adjustment of the knife - Drive: 400 V / 3.00 kW - Electric foot switch - Space requirement: approx. W 2450 x H 1700 x D 950 mm - Weight: approx. 1300 kg

Condition: good (used), Year of construction: 2007, Machine number: 338552-10 Built in: 2007 Size: max 320 x 470x 64 mm; min 102 x 152 x 7 mm Pile height pre-loading cage: 127 mm Pile height total stack: 330 mm Infeed height: 660 - 1.016 mm Speed: 15.000 c/h Iodpju R I Euofx Am Hoig

Year of construction: 2000, condition: good (used), Siat HSD 312 - S Semi-automatic sheet wrapping machine Version with horseshoe turntable for easy loading with a pallet truck Manufacturer: Siat Type: HSD 312-S Model A 400 Volt / 50 Hz Year of construction: 2000 Capacity: 1200 kg Turntable: with fork recess Turntable diameter: 1500 mm Adjustable turntable rotation speed Motorized film pre-stretch adjustable to 100 % or 200 % Turntable height: 75 mm Wrapping programs Program 1 Double wrapping with lifting and lowering of the film trolley Program 2 Double wrapping with lifting - pause for attaching the top cover of the pallet - and lowering of the film trolley Program 3 Single wrapping with only lifting of the film trolley Program 4 Single wrapping with lifting of the film trolley and pause for attaching the top cover Intended use Wrapping palletized loads with stretch film or in a net Maximum pallet dimensions: L = 1200 mm W = 800 mm H = 2100 mm kg = 1200 Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! Iedpfepygwqox Am Heig International shipping costs on request!

Year of construction: 2018, condition: ready for operation (used), A roller press (briquetting press) Köppern Maco is available. Production capacity: 10 MT/h, roller diameter: 720mm, roller width: 315mm, briquetting shapes: bolted segments, motor type: Siemens electric motor, motor power: 190kW, gearbox type: spur gear, machine dimensions X/Y: approx. 5000mm/5000mm, weight: approx. 15000kg, control: Siemens S7-300 Simatic. Including two new segment sets and one installed segment set. Documentation available. On-site inspection is possible. Iiodpfou Dal Hsx Am Hsg

Condition: excellent (used), Year of construction: 2009, Heidenhain digital display Working area Centre height: 310 mm Centre distance: 1625 mm Max. turning diameter in the gap: 880 mm Max. turning diameter over bed: 620 mm Turning diameter in front of the longitudinal carriage: 580 mm Turning diameter over cross slide: 425 mm Iiodpfoyyv N Uex Am Hjg Bed width: 350 mm Length of the gap in front of the faceplate: 200 mm Main spindle bore: 80 mm Spindle mounting: DIN 55027/8 Optional Camlock spindle mounting: DIN 55029/8 12 spindle speeds: 30 – 1500 rpm Cross slide travel: 365 mm Top slide travel: 165 mm Drive power: 5.5 kW Coolant pump motor power: 0.06 kW Weight: 1805 kg

Condition: used, Year of construction: 2022, SCM Morbidelli N100 22-31 PROSPACE Year of manufacture: 2022 Condition: Used, recently serviced Machine type: CNC machining center Model: 22-31 PROSPACE Machine weight: approx. 4,000 kg Work table: Complete nesting table Technical data 3-axis CNC machining center 9.5 kW electric spindle Iisdpfxezwfive Am Hog HSK tool clamping system 13-position linear tool changer, automatic Drilling unit Complete work table for nesting applications 2 vacuum pumps Automatic tool length measurement TECPAD control panel SCM Maestro software 3 software licenses: Maestro Base Maestro Nesting Maestro Freeform Application areas Nesting Drilling Milling and contour machining Freeform machining Complete CNC machining of panels and components Included in the scope of supply Complete nesting table 9.5 kW electric spindle Drilling unit 2 vacuum pumps TECPAD control panel 13-position HSK linear tool magazine Automatic tool length measurement system SCM Maestro software with Base, Nesting, and Freeform licenses

Condition: ready for operation (used), Year of construction: 2010, sheet thickness (max.): 13 mm, overall weight: 12,000 kg, cutting length (max.): 3,100 mm, CNC shearing machine manufactured in 2010. This LVD MVS-TS 13/31 features a maximum cutting length of 3100 mm and a cutting thickness of 13 mm. It is equipped with a backgauge range of 1000 mm and a powerful motor with 21.5 kW. If you are looking to get high-quality shearing capabilities, consider the LVD MVS-TS 13/31 machine we have for sale. Contact us for further details. Iiedpfxsy Twurs Am Heg • Maximum cutting thickness: 13 mm • Backgauge range: 1000 mm • Motor power: 21.5 kW Additional equipment • 1 new cutting blade

Condition: used, Year of construction: 2008, pressure 180 t chamfer lenght 3110 mm distance between columns 2600 mm column arm 410 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 80.0 mm/sec back stop - adjustable max. 750 mm stroke 260 mm dayligth 460 mm table height 880 mm oil volume 210 ltr. operating pressure max. 240 bar control DELEM total power requirement 15.0 kW weight of the machine ca. 11.200 kg. range L-W-H 4250 x 2000 x 2800 mm Current new price approx. 85.000 euros Special price on request Features: - Electro-hydraulic CNC press brake - With DELEM CNC control model “DA 66W” * 2D graphic programming * Automatic bend sequence calculation and collision detection * High-quality LCD screen (TFT) * Swivel control panel, front left Iiodpfsxa Hivex Am Hjg - CNC-controlled axes: Y1 + Y2 + X + R + CNC crowning - CNC electric motor-driven backgauge (X axis) * with 2x manually adjustable stop fingers - CNC electric motor height adjustment of the backgauge (R axis) - CNC electric motor table crowning - ROLLERI upper tool adapter (quick-change clamping) * including crowning device in the tool holder - 2x front, sliding support arms (“sliding” system) - Side guard (swivel doors) - Rear guard (sliding door) - 1x freely movable 2-hand/foot control - Operating instructions (PDF)

Condition: good (used), Year of construction: 2014, cutting range 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: square 250 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 180 mm automatic feeds 9999,9 mm feed minimum 2.0 mm cutting diameter minimum 5.0 mm band speed 15 - 100 m/min vice 340 mm Öffnung dimensions of saw-band 3650 x 27 x 0,9 mm Control MEP CNC total power requirement 2.2 kW weight 1240 kg range L-W-H 1800 x 1900 x 1750 mm actual NEW price about 23.000 Euro special price on request Iisdpfxjzkbn Uo Am Heg Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 – control and 7” touch screen display * simple and quick setting of all machine parameters * with additional soft keys + backlit display * 10 programs, each with a maximum of 9999 pieces and . a maximum length of 9999.9 mm - material feed with stepper motor via ball screw * single stroke 600 mm repeatable to saw any length * accuracy of ± 0.1/600 mm - feeder with protective cover and safety limit switch - precise setting of the cutting feed with indication in mm/min - positioning of the saw head and movement of the feeder using a joystick - automatic detection of the start of the cut - large deflection discs, adjustable from cast steel - Saw blade tension with blade tension control and display - Hard metal blade guides for maximum cutting precision - Automatic monitoring of the cutting load - Vice with quick adjustment * with interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant container * equipped with 2 electric pumps for lubricating and cooling the saw blade * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating instructions DE Information from the manufacturer: When installing this saw in a network with a residual current device (FI), this should be universally current sensitive and not less than 300 mA.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, 3 chip collection bags of 175 liters each Isdpfx Aexvxncom Heig Suction nozzle 200 mm Airflow volume 3,300 m³/h Motor power 3 kW Filter area 3 x 2.2 m² The extraction unit was used once on a rental basis

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 7,200 mm, travel distance Y-axis: 485 mm, travel distance Z-axis: 340 mm, spindle speed (max.): 6,000 rpm, machine/vehicle number: 1310031108, TECHNICAL DETAILS Travel range, X-axis: 7,200 mm Isdjzxngyjpfx Am Hsig Travel range, Y-axis: 485 mm Travel range, Z-axis: 340 mm Rapid traverse rate, all axes: max. 60 m/min Spindle speed: max. 6,000 rpm Spindle power: 5.5 kW Tool changer: Turret head Tool positions: 8 MACHINE DETAILS Compressed air supply: 7 bar Compressed air consumption: approx. 100 l/min (with spray device) Electrical connection: 400 V, 3 ~, 50 Hz EQUIPMENT Turret tool changer with 8 tool positions

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 8398, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 2,500 mm, actuation type: mechanical, total height: 2,200 mm, total length: 3,800 mm, total width: 2,000 mm, Equipment: CE marking, documentation/manual, Löser external cylindrical grinding machine for grinding the outer circumference of pipes 1.3. Technical data Dimensions: Width approx. 3.8 m | Height approx. 2.2 m | Depth approx. 2.0 m Power supply Electrical connection: 3 x 400 V AC | 50 Hz Total power: 15 kW Fuse: 32 A Pneumatic connection Main supply: 6 bar | approx. 5 m3/h Supply for air nozzles: 6 bar | approx. 30 m3/h Workpieces that can be processed Pipes made of steel or stainless steel with the following dimensions: Length: from 10 mm to 100 mm Diameter: from 50 mm to 1000 mm Grinding station type L Number of grinding stations: 1 Grinding mode: Wet machining Grinding technology: Grinding with a grinding belt and contact wheel | Grinding with a grinding wheel Cutting speed: continuously adjustable | max. 30 m/s Power: 7.5 kW per station Current consumption: maximum 14 amps per station Dimensions of grinding belt: Width 150 mm | Length 2,500 mm Dimensions of contact wheel: Width 150 mm | Diameter 400 mm Dimensions of grinding wheel: Width 150 mm | Diameter 400 mm Belt tension: Pneumatic | manually adjustable Station positioning: Manual Workpiece transport Workpiece support: V-groove | Angle 120° Height adjustment of V-groove: Manual Feed devices: 1 Positioning of feed device: Manual Iijdpfxozvn Urj Am Hsg Feed speed: approx. 1 m/min to 10 m/min; depending on the workpiece diameter Coolant management The machine is prepared for wet machining. A Stevens paper band filter, type PF 120, machine no. 322177, is included in the scope of supply.

Condition: used, Year of construction: 2013, Numerical control with Biesse Works Advanced Software Air conditioning system for the electrical panel Working range X 3200 Working range Y 900 Working range Z 70 N ° 1 3-axis horizontal electrospindle, Kw 4.5, Iso 30 cone type "BH 17" boring head with 17 spindles arranged as follows: N ° 6 independent spindles for vertical boring in "X" direction N ° 5 independent spindles for vertical boring in "Y" direction N ° 4 spindles for horizontal boring in "X" direction N ° 2 spindles for horizontal boring in "Y" direction N ° 1 integrated blade in X axis Machine weight Kg 1300 Iijdjxlghcepfx Am Hjg

Condition: excellent (used), Year of construction: 2011, operating hours: 26,882 h, functionality: fully functional, travel distance X-axis: 310 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 270 mm, Exeron S 310 MF Year of manufacture: 2011 Generator hours: 26882 Control system: Exowin 20 X, Y, Z travel: 310 x 270 x 270 mm Isdpfx Amozguk Us Hsig C-axis 3R tool holder in the spindle Erowa chuck on the machine table with magnetic plate Generator: 64 A C-box for carbide and PKD tools 20-position tool changer Fire extinguishing system Chiller Aluminum clamping plate, Erowa Documentation Machine is connected and available for inspection.

Condition: used, Year of construction: 1987, x-travel 400 mm y-travel 250 mm workpiece height 485 mm Control ELESTA CNC 314 total power requirement 10 kW weight of the machine ca. 4000 kg dimensions of the machine ca. m H A U S E R CNC - Controlled Vertical Precision Coordinate Grinding Machine Model S 3 – CNC 314 Year 1987 / 1998 partially reconditioned by Swiss-HTT # 0463 _____ Table size, approx. 600 x 380 mm Max. load on table, approx. 300 kg Table travel, longitudinal, max. (X Axis) 400 mm Table travel, cross, max. (Y Axis) 250 mm Vertical adjustment of grinding head max. (W Axis) 450 mm Stroke of grinding spindle, max. (Z Axis) 120 mm Table Longitudinal and cross feeds (X/Y-Axis) 0 – 1.500 mm/min Speed of grinding head stroke 15 – 7.500 mm/min Vertical distance between table and grinding spindle, max. 0 – 485 mm Distance between grinding spindle and column 350 mm Conical grinding, up to max. 16 ° Grinding Ø bore approx. 230 mm 18 Spindle speeds, depending on spindle motor 4,500 – 80,000 rpm Ijdpjt Hw Txofx Am Heig Planetary speeds (C-Axis) 5 – 250 rpm U Axis, radial infeed 6 mm Total electrical load, approx. 10 kW - 380 V - 50 Hz Weight, approx. 4.000 kg Accessories / Special Features: * CNC Continuous Path Control, Model CNC 314, (ELESTA-POLESTA II) with monitor,for 4 axes (XYC+U) in 2 1/2 dimension (XYC) Interpolation with a free programming,the U-Axis is not interpolating it is just an infeed axis. There is also a handwheel controldevice for setting – up purposes. Digital Read-out for the Z-Axis W Axis for vertical positioning of grinding head, Z Axis as high speed stroke axis, also for blind-hole grinding and surface grinding. U Axis for the infeed cycles during bore grinding. C Axis Feed for the of the Planetary Head. * Alltogether 2 grinding turbines 22.500 to 80.000 rpm, with some collets * Built-on Acoustic Grinding Contact Display Device Model KSV 5. * Separate coolant unit with band filter. * Built-on fire extinguishing system. Separate switch and control cabinet. Covered working area. Separate hydraulic unit * Central lubrication, service tools. Condition : Very good - Machine can be inspected under power. Delivery : Ex stock - as inspected under power. Payment : Net, after conclusion of contract

Condition: used, Year of construction: 1985, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück Iedpfx Amoxab Tve Hsig strokes per minute 18 - 31 oil volume 160 L Control ELGO P8511 column arm 200 mm distance between columns 3050 mm 0 max. 300 bar voltage 400 V main drive 9.0 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop Equipment: - electro-hydraulic sheet metal shear "swing cut" - machine frame = all-steel welded construction - ELGO NC control model P8511, control panel at the front left * for positioning the electro-motoric rear stop * target/actual position value input possible * adjustment by three-phase motor via toothed belt - support table with ball rollers * there are recessed grips between the table plates - front finger guard - hydraulically acting sheet metal hold-down device - 1x freely movable foot switch - emergency stop button at the front - movable scrap switch - original operating instructions + circuit diagram Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal cuts - 1x EHT extra long side stop 3.000 mm with mm scale & support foot - 1x EHT extra long support arm with 3.000 mm with scale & Support foot - EHT additional support arms with mm scale