Used Aluminum Frame Silos for sale (14,141)

Condition: excellent (used), 3 aluminium frame silos are offered. Previously used as granulate silos for an injection moulding plant. 2 x 75 m³, 1 x 95 m³. Manhole. Excellent condition. Iedpsw I Efmsfx Abnotk

Condition: good (used), 3 x 65 m³ aluminum silo (granulate storage silos) with long frame (used) Contents approx. 65,000 liters Diameter (inside) approx. 3,000 mm Total height approx. 12,000 mm Bulk density: 0.6 kg/dm³ Cone inclination: 90 degrees Connections in the topsoil: 1 vent nozzle with hood DN 200 1 flange nozzle DN 100 In the shell: 1 folding dome DN 450 1 filling pipe pulled downwards DN 80 Cone: The cone ends in a flange DN 150 with suction box Itjdpfovmidyox Abnsk otherwise as per sketch and photos

Condition: excellent (used), Aluminum silo (plastic granulate silo) standing on a base ring – used – designed for a bulk density of 0.6 kg/dm³ Volume: 100,000 liters Available quantity: 4 Diameter: approx. 3,500 mm Cylindrical height: approx. 9,900 mm Overall height: approx. 12,500 mm (+ 1,100 mm roof edge railing) Material: AlMg3 Bulk density: 0.6 kg/dm³ Roof slope of the upper section: 15° Equipment and connections: In the upper section: 1 x access and ventilation opening DN 600 with cover 1 x ventilation opening with cap 2 x flange DN 100 1 x block flange DN 50 1 x roof edge railing with handrail 2 x crane lugs On the shell: 1 x access door 850 x 2000 mm with ventilation slots Isdpfx Abjipyq Njnjtk 6 x pipe supports for filling pipe (without filling pipe) 1 x block flange DN 50 Various pipe penetrations in the area of the lower base ring The silo ends at the bottom in a 90° cone with flange DN 200 (discharge height: 1,000 mm). Additional cost: Two of the silos have a two-section ladder with fall protection (including 1 rest platform). The currently connected measuring and control technology is included in the above offer. However, no guarantee is given for its functionality! Please note that the two silos differ slightly in their connections and their positions. Otherwise, as per the images and drawing.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, conveyor belt length: 3,100 mm, conveyor belt width: 400 mm, total length: 3,100 mm, total width: 550 mm, total height: 900 mm, overall weight: 80 kg, power: 0.18 kW (0.24 HP), input voltage: 380 V, input frequency: 50 Hz, input current: 3 A, Equipment: type plate available, Aluminum frame conveyor belt 310x40cm 8m/min speed sorting belt conveyor mobile aluminum frame horizontal conveyor belt for sale in excellent condition length: 3100mm belt width: 400mm full width: 480mm Itedpfx Absydp Tgjnjk speed: 8meters/min drive: geared motor 0.18kw 50Hz belt material rubber fabric green color. frame material aluminum profile. height: 820mm adjustable/tilting legs braked wheels.

Condition: used, Working length: 4060mm The traveling trolley size: 650x1700mm Iodpfx Asyyhqdebnstk

Condition: excellent (used), Aluminum silo standing on a base ring (formerly a milk powder silo) - used – designed for a bulk density of 0.65 kg/dm³ Volume: 94,000 liters Manufacturer: P+W Metallbau Quantity: 1 Diameter: approx. 3,000 mm Cylindrical height: approx. 17,000 mm Material: AlMg3 Bulk density: 0.65 kg/dm³ Roof slope of the top: 15° Equipment and connections: In the top: 1 x access hatch DN 600 with lid 1 x venting nozzle DN 300 with hood 4 x flange DN 100 2 x flange DN 150 In the casing: 1 x access door, approx. 850 x 2000 mm with ventilation slots 1 x flange DN 50 for measuring probe 6 x pipe supports for filling pipe (without filling pipe) 6 x supports for access ladder (without access ladder) Various pipe penetrations in the area of the lower base ring The silo has a 60° cone at the bottom with a vibrating floor (DN 1500). Isdpfxoi E Hnys Abnstk The currently installed measuring and control technology is included in the price. However, no guarantee is given for its functionality! Otherwise, as per the pictures and drawing.

Condition: excellent (used), Aluminum silo (plastic granulate silo) standing on a base ring – used – designed for a bulk density of 1.0 kg/dm³ Volume: 105,000 liters Manufacturer: Zeppelin Available quantity: 1 Diameter: approx. 3,000 mm Cylindrical height: approx. 17,500 mm Overall height: approx. 15,000 mm (including 1,250 mm roof edge railing) Material: AlMg3 Bulk density: 1.0 kg/dm³ Inclination of the upper floor: 15° Inclination of the cone: 60° Equipment and connections: In the upper floor: 1 x access dome DN 500 with hinged cover 1 x ventilation opening with hood Itodpfslg Dcfex Abnek 2 x flange DN 100 PN 10 (filling + level indicator) 1 x stub for full-level indicator 1 x roof edge railing with handrail 2 x crane eyes On the shell: 1 x access door 850 x 2000 8 x pipe support for filling pipe DN 100 1 x filling pipe DN 100 1 x cable duct 1 x stub for full-level indicator The silo ends at the bottom in a 60° cone with a flange DN 200 (discharge height: approx. 500 mm) and a suction box. The currently connected measuring and control technology is included. However, no guarantee is given for its function! Additional cost: The silo has a two-part ladder with back protection and a landing platform (additional cost: €950 plus VAT). Otherwise, as shown in the pictures and drawing.

Condition: excellent (used), functionality: fully functional, Aluminum silo (plastic granulate silo) standing on a base ring – used – designed for a bulk density of 0.6 kg/dm³ Volume: 100,000 liters Manufacturer: Braby Available quantity: 1 Diameter: approx. 3,000 mm Cylindrical height: approx. 16,000 mm Total height: approx. 19,750 mm (including 1,200 mm roof edge railing) Material: AlMg3 Bulk density: 0.5 kg/dm³ Inclination of the upper floor: 15° Inclination of the cone: 90° Equipment and connections: In the upper floor: 1 x access dome DN 600 with hinged cover 1 x ventilation nozzle with insect screen 1 x roof edge railing with handrail 2 x crane eyelets 1 x flange for filling line Various nozzles for measuring and control technology On the shell: 1 x access door approx. 850 x 2,000 1 x filling pipe NW 80 1 x cable duct 1 x nozzle for level indicator Various pipe support brackets for filling pipe The silo ends at the bottom in a 60° cone with a flange. The currently connected measuring and control technology is included. However, no guarantee is given for its function! Iedelg A Uujpfx Abnstk Otherwise, as per the pictures and drawing.

Condition: excellent (used), functionality: fully functional, Aluminum flour silo with extended base ring (used), designed for a bulk density of 0.8 kg/dm³ Volume: 56,000 liters Available units: 1 Diameter: approx. 2,400 mm Cylindrical height: approx. 15,000 mm Total height: approx. 16,500 mm (incl. roof perimeter safety railing) Material: AlMg3 Bulk density: 0.8 kg/dm³ Isdpfx Aeyhznzjbnstk Equipment and connections: Top head: - 1 x pressure/vacuum relief valve - 1 x venting filter add-on - 1 x flange for filling pipe - 1 x flange for level measurement - 1 x flange for pressure transducer - 1 x flange for level indicator - 1 x roof perimeter safety railing with handrail - 2 x lifting lugs Silo shell: - 1 x access door 850 x 1800 mm - 8 x pipe brackets ø 108 mm for filling pipe - 1 x filling pipe DN 100, ending at TW connection at the bottom - 1 x cable protection pipe DN 50 - Various pipe penetrations in the area of the lower base ring The silo features a 40° conical bottom, terminating in a DN 1500 flange for fitting a vibrating floor. At the bottom/cone: - 1 x block flange for empty indicator - 1 x vibrating floor The currently installed measuring and control technology is included in the above offer, but no guarantee is given for its functionality! Otherwise, as per images and drawing.

Condition: used, 2,250 x 2,250 x 6,700 mm (LxWxH) Itodpfjy Ar Sqox Abnjk

Year of construction: 2000, condition: used, functionality: fully functional, Aluminum storage silo with a sturdy base ring Technical data / Dimensions Available quantity: 4 Volume: approx. 174,000 liters Container type: Silo Condition: used Food grade: no Design: vertical Internal diameter: approx. 4,200 mm External diameter: approx. 4,260 mm Cylindrical height: approx. 15,000 mm Overall height: approx. 16,250 mm Weight: approx. 3,500 kg Specific gravity of the medium: 1 ton/m³ Operating pressure: non-pressurized Notes: A new access ladder for the silo system can be offered as an option. Material / Properties Material, inner shell: Aluminum Internal welds ground smooth Notes: Material AlMg3 / AlSi Equipment Iedpfxey Ufigo Abnetk Base design: Foot ring / base ring Quantity: 1 Mounting: fixed Top bottom type: Conical bottom Bottom type: Cone Cone angle: 90 degrees Top: 1 x roof edge railing, height: approx. 1,200 mm 1 x walkway with platform 2 x crane eye 1 x manhole DN 500 1 x connection flange for level measurement 1 x threaded socket for max. sensor 1 x flange DN 100 (filling) 1 x vent with hood Shell: 1 x operating room door (approx. 1,800 x 850 mm) 1 x cable protection conduit 1 x filling line DN 100 (insulated) ending in a TW connection 1 x welded adapter for empty message Bottom: The silos end at the bottom in a 90° cone with a flange DN 200 and an emergency shut-off valve. Fittings: The measuring and control technology installed on the silo will be supplied free of charge. However, no guarantee can be given for its proper functioning. Documentation Drawing

Year of construction: 2000, condition: excellent (used), functionality: fully functional, 2 x 50 m³ aluminium silos with long support ring, ø 3,000 mm (plastic granulate silo) Capacity: approx. 50,000 litres Manufacturer: Eichholz Year of manufacture: 2000 Quantity: 2 Diameter: approx. 3,000 mm Cylindrical height: approx. 10,000 mm Total height: approx. 11,250 mm Weight: approx. 1,400 kg Bulk density: 0.6 kg/dm³ Material: AlMg3 Connections and fittings: Ijdpfx Abjxvtvzonstk On the top deck: 1 x roof edge guard rail (ø 3,000 x 1,250 mm) 2 x crane eyes 1 x manhole DN 600 with vent nozzle 1 x flange DN 100 (filling) 1 x flange for level indicator 1 x threaded socket 1 1/2" (full indicator) On the shell: 1 x filling line with pipe supports 1 x access door (approx. 850 x 1,850 mm) 1 x cable protection conduit 1 x threaded socket (1 1/2") for empty indicator Silo ends in a 60° cone with emergency shut-off slide valve. Otherwise as per photos

Year of construction: 1997, condition: excellent (used), functionality: fully functional, FOR SALE: 4 FOUR STAINLESS STEEL SILOS (INOX 304) – 500 m³ EACH Available for sale are 4 stainless steel silos, each with a capacity of 500 m³, constructed from INOX 304, suitable for storage and handling of dry bulk materials. Previous Use: The silos were used for loading dry materials into bulk tanker trucks (silo trucks). Technical Specifications: Capacity: 500 m³ (each) Total Height (including cone): 22.6 m (22,600 mm) Diameter: 5.7 m (5,700 mm) Material: Stainless Steel INOX 304 Silo Supports / Bases: Each silo is supported by 4 base structures Weight per base: approx. 60 tons Total base weight per silo: approx. 240 tons Base dimensions: Length 5,700 mm × Width 5,700 mm × Height 9,700 mm Location: Located in the Industrial Area of Volos, Greece Dismantling & Transport: Isdpfsy I Dk Asx Abnstk Available upon agreement: Dismantling Transport to Port of Volos Loading for export Quantity: 4 units Price per unit: €200.000 Total price: €800.000 Condition: Available / For Sale For further information or commercial inquiries, please contact us.

Year of construction: 1997, condition: excellent (used), functionality: fully functional, Aluminum storage silo with a sturdy base Technical data / Dimensions Available quantity: 1 Volume: approx. 80,000 liters Container type: Silo Condition: used Food grade: yes Design: vertical Internal diameter: approx. 3,500 mm External diameter: approx. 3,550 mm Cylindrical height: approx. 9,830 mm Total height: approx. 14,225 mm Weight: approx. 2,500 kg Specific gravity of the medium: 1 ton/m³ Operating pressure: non-pressurized Material / Construction Material of inner shell: Aluminum Note: Material AlMg3 Equipment Base design: base ring/base frame Quantity: 1 Mounting: fixed Bottom type (top): conical bottom Bottom type (bottom): cone Top: 1 x roof edge railing (height: approx. 1,200 mm) 2 x lifting lugs 1 x ventilation hood 1 x access to the filter housing The filter housing contains the following connections: 6 x filter openings 1 x connection for silo pilot (level measurement) 1 x connection for level limit signal Itjdpfx Abszpzuljnsk Shell: 1 x access door (approx. 1,800 x 80 mm) 1 x filling line DN 80, ending in a Storz coupling at the bottom 1 x cable protection pipe DN 50 2 x weld-in adapters for level limit signal Various pipe penetrations in the base frame Various brackets for access ladder Bottom: 1 x manhole DN 400 with cover 1 x discharge chute DN 1500 (Reimelt), ending in a cellular rotary valve at the bottom

Condition: ready for operation (used), Year of construction: 2022, controller manufacturer: TRUMPF, controller model: Touchpoint TruBend, overall weight: 30,500 kg, total width: 5,150 mm, total height: 2,995 mm, product length (max.): 6,500 mm, Folding Machine manufactured in 2022. This TRUMPF TruBend Center 7030 (B34) features a maximum bending edge length of 3,123 mm and a holder clamping force of 101 t. It includes a 2-axis part manipulator with a travel of 2,653 mm and an automatic loading/unloading system. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend Center 7030 (B34) machine we have for sale. Contact us for further details. • Capacities • Max bending edge length: 3,123 mm • Min bending edge length: 200 mm • Min bending width with standard holder: 145 mm • Min bending width with ENW tools: 40 mm • Max box height: 220 mm • Holder clamping force: 101 t • Material thickness: min 0.4 mm; max structural steel 3.0 mm; max stainless 2.2 mm; max aluminum 4.0 mm • Machine construction: Welded steel frame; bending system: Wedge drive; crowning: Included, adjustable via machine control • Manipulation and positioning • 2-axis part manipulator with suction cups (X travel 2,653 mm; stroke 100 mm; 12 suction modules) • 5-axis rear stop; rotary manipulator; front stop; loading pincers • Automatic part positioning and rotation Ijdpfxozvdc Se Abnotk • Speeds • Y-axis rapid traverse: 250 mm/s • Front stop speed: 3,000 mm/s • Part manipulator speed: 3,000 mm/s • Rotary manipulator speed: up to 3 rev/s • ToolMaster Bend speed: 2,400 mm/s • Positioning accuracy • Y-axis: 0.10 mm; X-axis: 0.05 mm; R-axis: 0.05 mm • CNC control • 21.5-inch touchscreen; OS: Windows 7 Ultimate 64-bit • Keyboard and mouse; USB; RJ45 network; Ethernet 10/100 Mbit/s • Internet teleservice / remote diagnostics • Bend angle measurement • Optical bend-angle assistance; integrated camera; graphical comparison of programmed vs. actual angle • Minimum part-side length for angle measurement: 10 mm • Safety equipment • CE certification; rotating safety doors; safety light barriers; working-area access protection • Foot switch with enable function; emergency stop • Electrical data: 80 kVA Additional equipment • Automatic loading/unloading system with storage interface • Automatic blank separation/feeding/transfer; automatic finished-part unloading • Belt conveyor for finished parts; max blank size 3,048 x 1,500 mm • Storage interface included • Loading trolley: Not included; Rail set: Not included • Tooling and tool systems • ToolMaster Bend: Automatic hold-down tool positioning and setup; automatic positioning of standard, Pick&Place, and curved holders • Included tooling: 16 standard hold-down tools (160 mm each); 6 Pick&Place hold-down tools; Pick&Place segments 10/15/20/40 mm; corner hold-down tool (199 mm); OBW90 and UBW90 bending tools • ENW equipment: ENW function for tilting hold-down tools; ENW110-40 tool (length 3,123 mm; depth 40 mm); min bending width with ENW tools 40 mm • Additional part handling modules • 12 three-surface vacuum modules (upper/lower/front suction) • 6 magnetic modules; 4 two-surface magnetic modules • Vacuum and magnetic modules can be used together • Software and data capture • TecZone Fold floating license: automatic programming from 2D/3D data, automatic bending program generation, 3D simulation, collision checking, manual modification • Wireless 2D code reader with Bluetooth: barcode and DataMatrix reading; automatic production program loading

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 Condition: Well-maintained Equipment: Gantry milling machine High-Z S-1400T/105 (Rev. 1.5 - Facelift 2016) with ball screws Travel: 1400 x 1050 x 110 mm (X/Y/Z) Machine control Zero-3 (Rev. 1.3) for High-Z series, 5-channel, 110 - 240 Volt, 50/60 Hz Milling kit for High-Z S-1350 or S-1400T/105, additional stabilization of the Z-axis when machining very hard materials Energy arm for S-1350 and S-1400/105 Cable harness for clean routing of cables and hoses from milling motor, spray mist cooling, etc. T-slot plate on base frame for High-Z S-1400T/105 - 1790x1160mm (NL2016) 1790 x 1160 x 76mm T-slot keys, 8 pcs with bridge, M6 - 10 pcs. incl. screws M6x25 6 pcs. clamping bars 50x20x10mm M6 Base frame for combination with enclosure for S-1400T/105 - 1790x1450x900mm (NL2016) SET - Suhner milling motor UAD 30-RF / 1050W - 3,500-30,000 RPM, 230 Volt, 50/60Hz incl. 8mm and 10mm collets Collet set for Kress and Suhner (UAx-30RF) milling motors, 3.00mm / 3.175mm (1/8") / 6.00mm Milling cutter set, 10-piece (shaft 3.175mm) Wood milling cutter: 2x1mm / 2x2mm / 1x3mm Aluminum/plastic: 2x1mm / 2x2mm / 1x3mm Extraction nozzle made of aluminum for Kress or Suhner milling spindle Hose nozzle with Ø 32 and 38mm Dimensions 135x60x30mm Tangential module EOT-3, stroke 3mm Oscillating with 3mm stroke Connection cable for EOT-3 / TCM-4 for High-Z series - 5m Tungsten carbide blade type E12 - cutting edge 12mm Itodpozu T Smsfx Abnek Tungsten carbide blade type E18 - cutting edge 13.5mm EcoCam EC-4 continuous cutting pad 4mm / roll width 2m Always delivered in 2m roll width!!! 1m2 = 2 x 0.5m Tangential grooving module TCT-1 Tool holder type KR for grooving module TCT-1 for ball-bearing grooving wheels Grooving wheel B14 Grooving wheel B24 Side channel compressor Rubin 220, 1.5KW/50Hz vacuum pump incl. 3m spiral hose 40mm 230V/50Hz / 9.5A / 190mbar -190mbar / 71dB(A) Maintenance set High-Z series Grease gun + grease cartridge 400g + 100ml oil Network switch 5-port 10/100 Mbit/s + LAN cable 1m, 5x 10/100Mbps-RJ45 ports with auto negotiation Kinetic-NC control software incl. CNC-Pod (LAN), network cable + USB charging cable Vacuum table VT-150100 - 1500x1000mm incl. through-milling mat and connecting hoses Location: NRW Availability: Short-term Sold on behalf of a customer! Technical data without guarantee!

Condition: like new (used), Year of construction: 2025, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 1630, overall weight: 7,800 kg, warranty duration: 6 months, power: 85 kW (115.57 HP), Complete production line for sale, based on a Di Più BRIK MB100 briquetting press (complete production line). Fully refurbished DI PIU BRIK MB100 machine (factory-refurbished in 2025), ready for immediate operation. The machine is designed for high-capacity briquetting and is suitable for demanding industrial applications. The machine has approximately 2,000 operating hours. It has been newly refurbished at the Di Più factory: all vital components have been replaced, including all cables, electrical wiring, and required electrical equipment. The machine is brought to as-new condition and comes with a 6-month Di Più factory warranty. The machine can produce briquettes with or without a hole, with a diameter of 90mm to 110mm, using soft or hard wood, in either round or square shapes. Machine inspection is possible at the factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy. The Di Più BRIK MB100 mechanical briquetting press is an automatic machine for compacting wood, sawdust, and other waste materials into wooden briquettes. The ideal humidity of the input material is between 8% and 12%, and the particle size between 1mm and 12mm. Technical data: - Production capacity: 1,300 – 2,300 kg/h (for sawdust density 160–200 kg/m³) - Briquette diameter: 90 – 110 mm - Main motor power: 75 kW - Total installed power: 98 kW - Piston compression pressure: 2,000 – 2,500 kg/cm² - Vertical screw with gearbox: 5.5 kW - Oil pump: 1.5 kW - Oil pump for extruder head closure: 1.5 kW - Feeder with screw and adjustable speed: 1.5 kW - Oil system for bronze bearing lubrication: 100 liters - Briquette output monitoring sensor (automatic shutdown when material supply runs out) - Safety covers for moving parts - Oil pressure sensor - Control cabinet - Input material storage hopper (buffer) - Level sensor for feed system monitoring - Machine weight: approx. 7,800 kg The machine is equipped with all necessary accessories for complete operation and integration into a briquetting line: ACCESSORIES – MB100: - Dosing silo: Made of heavy-duty steel. Diameter: 1,500 mm, height: 1,000 mm. Equipped with a rotary cutter with 2.2 kW gearbox, mounted on a robust steel frame. Material supply is monitored by a level sensor. - Briquette cooling line after extrusion, total length 20 meters - Automatic briquette cutting saw - The saw automatically cuts briquettes to the operator's preset lengths - Device for producing briquettes with a hole - Machine head cooling system with ice water - The system produces 50 liters/min of ice water for effective briquetting head cooling. - Air-cooled water chiller with hermetic scroll compressors, microprocessor control, and a large energy storage tank with an immersed water-to-refrigerant heat exchanger. - The heat exchanger is a high-efficiency fin-pack type, made of copper pipes and aluminum fins. - Water tank with a capacity of 800 liters - Water feed pump (50 l/min – 20 m.w.c. – 0.55 kW) with three-circuit DN25 valves for regulating cooling water temperature at the briquetting head - Digital electronic temperature controller connected to an NTC sensor (measuring element d.6 × 52 mm, IP68, AISI 316) OPTIONAL: NOVAPAC packaging machine Possibility to purchase an additional NOVAPAC packaging machine, fully compatible with the Di Più BRIK MB100 and other machines. An ideal solution for automatic packaging immediately after briquetting. Isdpfxewrp Emj Abnetk Year: 2013 Price for Novapac: €19,000 Equipment visible in the las

Condition: used, first registration: 09/2018, Year of construction: 2018, Ardor SVM 38 m³, cement/silo semi-trailer, 3 compartments, Alcoa In good condition! • ABS / EBS • Lift axle • Disc brakes • 3 x air-suspended SAF axles • Lifting/lowering system • 3 compartments • 3 x dome lids • Direct discharge to the rear • Working pressure: 2 bar • Test pressure: 3 bar • Vehicle external dimensions: 7,700 x 2,550 x 3,900 mm • GVWR: 39,000 kg Ijdpfszlxlmex Abnetk • Payload: 32,510 kg • Tare weight: 4,490 kg • Alcoa aluminum rims • Tires 385/65 R22.5 • Tread depth: 13/11 / 13/13 / 13/12 - German semi-trailer! - First owner - TÜV / inspection: on request and subject to an extra charge: new! Errors and prior sale excepted! = Further information = Tare weight: 4,490 kg

Year of construction: 2021, condition: ready for operation (used), A silo system consisting of 3 storage silos, 1 weighing silo and conveying units is available. Material: PE/PP/PS/ABS/LDPE/HDPE/MDPE, storage silo volume: 32.6m³, weighing silo volume: 13.8m³. Storage silo capacity at 0.2t/m³: 6500kg, weighing silo capacity at 0.2t/m³: 2800kg. Storage silo dimensions X/Y/Z: 4200mm/4200mm/4200mm, weighing silo dimensions X/Y/Z: 3000mm/3000mm/3400mm, control: Siemens S7. Including steel frames, gate valves, full and demand indicators, filter bags, filling line, conveying and dosing system, rotary valves and gate valves. Documentation available. On-site inspection is possible. Iodpfx Asv Ip Stsbnetk

Condition: ready for operation (used), Year of construction: 2022, operating hours: 715 h, controller manufacturer: SIEMENS, laser power: 3,000 W, punching force: 18 t, sheet thickness (max.): 6 mm, overall weight: 18,500 kg, total width: 9,945 mm, total height: 2,500 mm, product length (max.): 8,862 mm, number of axes: 3, This 3-axis TRUMPF TruMatic 6000-1600 fiber was manufactured in 2022. It features a maximum laser power of 3,000 W and a punching force of 180 kN, with a maximum punching frequency of 917 strokes/min. The machine has a large working area, allowing for combined punching and laser processing. If you are looking to get high-quality punching and laser cutting capabilities, consider the TRUMPF TruMatic 6000-1600 fiber machine we have for sale. Contact us for further details. • Laser source: TruDisk 3001 solid-state laser, 3,000 W, fiber-optic beam delivery (10 m), compact cutting head, anti-collision, protective glass, closed beam guidance, programmable cutting gas pressure • Control/OS/Interface: Rexroth IndraMotion MTX CMP70; Windows Embedded; 17-inch touchscreen; 4 GB program memory; 320 GB HDD; USB; RJ45 10/100 Mbit/s; Internet teleservice; integrated technology database; NC program management; production planning; automatic machine shutdown; network connection for programming/production systems Ijdpfx Abezul Dzenjtk • Working area: • Punching (no reposition): 3,050 x 1,550 mm • Laser cutting (no reposition): 3,050 x 1,550 mm • Combined (no reposition): 2,500 x 1,550 mm • Combined (with reposition): 3,050 x 1,550 mm • Max sheet thickness: 6.4 mm; Max workpiece weight: 230 kg • Max part size via flaps: 500 x 500 mm (laser) / 500 x 500 mm (punching); via chute: 80 x 50 mm • Axes/performance: • Drives: Maintenance-free AC servo motors (X/Y/C); electrohydraulic punching head • Max speeds: X 90 m/min; Y 90 m/min; simultaneous 108 m/min; C-axis 330 rpm (punching/thread forming) • Frequencies: Max punching at E=1 mm: 917 strokes/min; marking: 2,800 strokes/min • Accuracy: Pa ±0.1 mm; Ps ±0.03 mm; min increment 0.001 mm • Punching unit: • Force: 180 kN; electrohydraulic head; rotary single-station tool holder • Tool circumferences: punching 76.2 mm; forming 101.6 mm; optional 110 mm • Change times: basic 3.2 s; MultiTool 0.3 s • Magazine: 25 linear positions; standard 22 tools; up to 220 with MultiTool • Clamps: 3 hydraulic; fully rotatable tools; programmable blank-holder; tool length compensation; punch lubrication; chip extraction with automatic tube emptying and fill-level estimation; stroke counter; tool lubricant level monitoring; WhisperTools compatible • Forming/punching functions: • MultiTool; MultiBend; thread forming (M2.5–M10); surface marking/embossing; vertically movable clamps • Max MultiBend: width 55 mm; height incl. material 25 mm; angle up to 90° • Automatic thread-forming lubrication; thread counter • Laser cutting capability (max thickness): • Mild/structural steel: up to 6 mm (O2 or N2) • Stainless steel: up to 6 mm (N2) • Aluminum: up to 5 mm (N2) • Laser functions: NitroLine; FocusLine; FastLine; FlyLine; ControlLine; slug detection; ejector cylinder for laser-cut parts; laser event log; automatic cutting-head height adjustment • Standard machine equipment and safety: • Rigid C-shaped welded frame; coordinate guide system; linear tool magazine • 3 hydraulic clamps; programmable repositioning; foot switch for clamp closing • Radiation protection at cutting head; two 500 x 500 mm part flaps with sensors • Ball tables; two finished-part containers; chip container • Compact dust extraction and filtration unit • Water-air cooling unit (machine and laser) • Initial hydraulic oil filling • Two-level safety light curtains; fast drive shutdown; protection against scattered laser radiation

Condition: used, Year of construction: 2022, functionality: fully functional, film width: 300 mm, product width (max.): 300 mm, product length (min.): 100 mm, product width (min.): 80 mm, product length (max.): 500 mm, Equipment: documentation/manual, We offer this used PACKMAT Type S-300 bag sealing machine, manufactured in 2022. Plant No.: 750-0-0426 Year of manufacture: 09/2022 Itodpfx Abozquxgenok Bag packaging system for PE, PP, VCI, and Tyvek tube films up to 300 mm in width. It manufactures, prints, fills, and seals bags in a single process, with integrated thermal transfer printing. Features: ✓ Manufacturing, printing, filling, and sealing in a single process ✓ Siemens S7 PLC with touch panel, counter functions, maintenance, and setup menu ✓ Impulse sealing system with temperature control, over-temperature protection, heating wire breakage monitoring, and cutting knife ✓ Robust construction: aluminum profile frame, closed housing, integrated work table ✓ Complete technical documentation and CE declaration of conformity Performance data: 15 bags/minute at a bag length of 300 mm Bag width: 80–300 mm (PE / PP / VCI / Tyvek) Bag length: 100–500 mm, freely adjustable Direct printing: 305 dpi thermal transfer Integrated printer: Toshiba B-SX8T, thermal transfer, 305 dpi, printing width up to 213.3 mm, speed up to 203 mm/s Also included in the scope of delivery: Remaining stock of packaging material – approx. 46 rolls of tube bags and approx. 300 rolls of ribbon. Condition: The machine is in technically perfect working order and shows signs of wear and tear consistent with its age and use. With certain bag materials, occasional restrictions may occur when opening the bags, for which no guarantee is provided. Inspection is possible by prior arrangement. If you have any questions or require further information, please send us a message or call us.

Condition: used, maximum load weight: 28,100 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 04/1999, loading space volume: 45 m³, total width: 2,550 mm, Year of construction: 1999, Equipment: ABS, 3-axle Feldbinder tipping silo semi-trailer, 45 m³ VIN: 0F07197 Chassis / Components: * Air suspension * Lift axle * Haacon support legs * Jost support legs at the rear * Tires: 385/65 R.22,5 * Remaining tire tread: 1. ~40/10% 2. ~20/50% 3. ~20/10% * 3 x BPW Eco axles with drum brakes * 2 x PVC storage boxes * Aluminum rims * NATO plug Body: * Hyva tipping cylinder, max. 220 bar * Volume: approx. 55 m³ * Loading pressure gauge * 1 x outlet at the rear * 4 x manhole covers * 2 x hose pipes per side Weights: * Gross vehicle weight 34,000 kg * Payload 28,100 kg * Tare weight 5,900 kg Other: * German registration * Valid until 12/2026 New main inspections / safety checks or weight adjustments (reduction/increase) are available upon request. We will gladly assist you in obtaining export / transport license plates. We can also arrange for the transport of your purchased vehicles within Germany. Contact us! We speak the following languages: German, English and Russian! No liability for printing & typographical errors, changes, prior sale and errors reserved! Who are we? Itjdpozcil Hefx Abnjk Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. On 11,000 m², you will find a wide variety of vehicles. Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Convince yourself! Our service for you: Loading of vehicles We will gladly help you with loading your purchased vehicles. Organization of special transports We will gladly help you with organizing special transports. Day license plates / export license plates We will gladly help you in obtaining export license plates / short-term license plates. Handling of customs formalities We will gladly help you with handling customs matters.

Condition: excellent (used), functionality: fully functional, 2 x aluminum silos with tall support ring and filter housing, ø 3,000 mm, designed for a specific weight of 0.6 kg/dm³ Manufacturer: Zeppelin Capacity: approx. 80,000 liters Diameter: approx. 3,000 mm Overall height: approx. 16,000 mm Iedpegh Dgbefx Abnjtk Weight: approx. 2,000 kg Specific weight: 0.6 kg/dm³ Connections and fittings: On the top: 1 x crane eye In the filter housing: 1 x filter frame, approx. 900 x 1,000 mm with vent stub 1 x manhole DN 600 3 x connection for control/measuring technology (including silo probe, min-max indicator and additional measuring sensor) On the casing: 1 x access door with closure to the filter housing 1 x access door (cone) 1 x signal light Various openings for filling lines The silos end in a 60° cone. The 2 silos have a double-rung ladder with back protection.

Condition: good (used), Year of construction: 1992, The bender is set up for aluminum, chromatech and plastic frames. Itjdpfxjqhugfj Abnjk

Year of construction: 2008, condition: used, functionality: fully functional, 3 x 142 m³ Aluminium Silo (Plastic Granulate Silo) Technical Data / Dimensions Available units: 5 Year of manufacture: 2008 Volume: approx. 142,000 liters Type of vessel: Silo Condition: used Suitable for foodstuff: no Itedpfsxqr E Rjx Abnsk Design: upright Internal diameter: approx. 3,500 mm Cylindrical height: approx. 14,900 mm Total height: approx. 17,500 mm Weight: approx. 3,500 kg Specific gravity of medium: 0.63 t/m³ Operating pressure: non-pressurized Ground clearance: approx. 770 mm Material / Construction Inner shell material: Aluminium Remarks: Material grade: AlMg3 / AlMgSi3 Support type: support ring/ base frame Top bottom type: conical head Slope: approx. 15 % Bottom type: cone Cone angle: 60 degrees Top section: 1 x roof edge railing, height: 1,200 mm 1 x walkway with handrail 2 x crane lugs 1 x manhole DN 600 with vent 1 x connection flange for level measurement 1 x welded socket for high level sensor 1 x flange DN 100 (filling) Shell/body: 1 x personnel door (approx. 1,800 x 850 mm) 1 x cable protection tube 1 x filling line DN 100 with TW connection Bottom section: The silos terminate below in a 60° cone with DN 200 flange and emergency shut-off valve, as well as a mounted suction box.