Used Aeg Dtb-4/6 for sale (83,436)

Condition: good (used), Bench drill, stand drill, pillar drill, column drill -Spindle holder drill chuck: 4 mm -Clamping table: O 125 mm - Projection: 105 mm -Speeds: 1400 rpm -Pillars diameter: 41 mm -Spindle stroke: 55 mm -Motor power: 75W Dkedpfed Nia Eox Al Aju -Dimensions: 290/150/H530 mm -Weight: 13.4kg

Condition: used, Year of construction: 2023, functionality: fully functional, OMEGA ALLPRO 90 (2023 model) - FOLDERF-GLUER - Microbox device - Servo motors on the feeder and stacker - Remote control - Left and right-hand side-register sections - Retractable center carrier in the final folding section - Third carrier in PF1 and PF2 - Camera at the feeder to monitor the delivery section entry - Motorized carriers with positioning readout - Electronic servo system for 4- and 6-corner boxes - Pneumatic aligner for micro-flute crash-lock bottom boxes - eWON Flexy for OPC UA data sharing - Air-assisted folding system for crash-lock bottoms Dkjdpfx Alszlqzge Aju - Safety pull-cords - ERO cold glue system (3 guns + side glue wheel with reservoir)

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, Omega 130 folder-gluer - 4- 6- corner - ALLPRO 130 (2016 model) - Camera at the feeder to monitor the entry to the delivery section Dkjdpfx Aezlqwzol Aeu - Vacuum feeder - Servo-driven feeder - Left and right side-register sections - Remote control - Motorized transport belts - Motorized upper carriers for heavy materials - Electronic servo system for 4- and 6-corner boxes - Pneumatic aligner for micro-flute crash-lock bottom boxes - eWON Flexy for OPC UA data sharing - Safety pull-cords - LAMBERTONI hot-melt gluing system (2 guns) + side disc with cold glue pot - Option to install a ZATOR cold-glue system (4 guns) without pump and encoder

Condition: like new (used), Year of construction: 2020, Technical data: Working width: 2050 mm Max. bending capacity (mild steel St40): 6.0 mm Max. pre-bending (mild steel St40): 4.0 mm Top roll diameter: 170 mm Dkodpfx Alsyzc Iae Aju Side lower roll diameter: 170 mm Central lower roll diameter: 145 mm Cone bending device Hardened rolls Working height: 800 mm Mobile control panel Hydraulic drop-end bearing CE marking Motor power: 2.5 kW Dimensions (L x W x H): approx. 3600 x 1200 x 1200 mm Net weight: approx. 3 tonnes Condition: Very good, almost as-new condition, very little used The seller is not liable for typographical or data transmission errors. The machine's appearance, technology and wear are age-appropriate; used machines are sold without any warranty.

Condition: used, Control amplifier, servo motor control, power controller, thyristor power controller, thyristor controller -Manufacturer: AEG, thyristor power controller -Type: Thyro-A 1A 400-60 100A -Quantity: 2x power controllers available -Price per piece -Dimension: 175/85/H170 mm Dedpfx Alopcmtwo Asku -Weight: 2.2 kg/pc.

Condition: used, functionality: unexamined, Year of construction: 1979, Various used housing parts for SBM-Vöest 10/6/4 Export Dkodpfsxv U S Rjx Al Aou

Condition: good (used), functionality: fully functional, Year of construction: 2012, Motorized Swivel Bending Machine Mfg. SCHRÖDER Type: MAK 4 EVO 3200/6.0 UD Year: 2012 Technical Data Manufacturer: SCHRÖDER Type: MAK 4 EVO 3200/6 UD Year of manufacture: 2012 Working length: 3200 mm Capacity: 6 mm Upper die stroke: 850 mm Upper die geometry: 180° Bending center adjustment: 100 mm Dimensions: approx. L 6.45 x W 2.65 x H 2.75 m Machine weight: approx. 20.6 t Accessory weight: approx. 3.4 t Equipment Dkodpfx Alozrvdge Asu - Up’n Down bending die, automatically controlled by POS 3000 - Upper die tool clamping, hydraulic - Bending die tool clamping, hydraulic - Motorized central crowning - Motorized bending die adjustment, program-controlled - Bending center optimization via bending center adjustment - Foot switch - Protection of operation from the rear, controlled by a light curtain and safety PLC - Safety package EVOLUTION UD with tool changer incl. safety fence - Speed optimizer Z-axis drive (max. axis speed: 120 mm/s) Control system: POS 3000-3D graphic control View of product and machine in 3D – display Radius-Step-Bending function Stop system Positioning stop 10 - 3400 mm in U-shape with 4 sectors (850/1700/2550/3400), Panel for individual positioning of the control, pneumatic lowering of the stop fingers, steel balls in the support table. Angle stop left and right 1500 mm. The support plates are divided and can be removed individually to create the necessary space for existing counter-bends. - 2 pneumatically lowerable angle stops mounted on the frame - Front stop function of the bending die for accommodating bending rail finger segments incl. 2 finger segments matching the bending rail Fully automatic tool changer Tool changing portal for upper die tools with hydraulic tool clamping (total 7 axes) for maximum upper die tool height of 400 mm, two asynchronously movable tool changers each with three gripping units Upper die tool Tools WZS 2000, approx. 1000 N/mm2 tensile strength • Tool set for automatic tool changer, upper die Goosefoot set h= 180 mm incl. corner pieces left and right. Bending die tools Tool system for the bending die WZS 3000, approx. 1000 N/mm2 tensile strength Bending rail "A", segmented, stepped, b= 15 mm, h= 101 mm No. 1 - L = 2 x 25, 30, 35, 40, 45, 50 = 225 mm No. 2 - L = 14 x 200 mm Bending rail "A", segmented, stepped, b= 20 mm, h= 101 mm No. 1 - L = 2 x 25, 30, 35, 40, 45, 50 = 225 mm No. 2 - L = 14 x 200 mm 2 finger segments for front stop matching bending rail b= 20 mm •Bending rail "A", segmented, b= 30 mm h= 101 mm No. 1 - L = 2 x 25, 30, 35, 40, 45, 50 = 225 mm No. 2 - L = 14 x 200 mm 2 finger segments for front stop matching bending rail b= 30 mm Lower die tools Lower die rail with recesses segmented, same radius as upper die tool b= 117 mm h= 40 mm Total length 3.240 mm, divided into 4 x 500, 2 x 620 mm All information is without guarantee. A demonstration under power is possible at any time by arrangement.

Condition: used, Control amplifier, servo motor control, power controller, thyristor power controller, thyristor controller -Manufacturer: AEG, thyristor power controller -Type: Thyro-A 1A 400-60 80A -Quantity: 1x power controllers available Dkodpfxopcmtlo Al Aeu -Price per piece -Dimension: 175/85/H170 mm -Weight: 2.2 kg

Condition: ready for operation (used), Year of construction: 2006, GUK folding machine FA 50/6 FA 52/4, year of manufacture 2006, equipped as follows: – Flat pile feeder FA 50 – 1st station FA 50 with 6 folding pockets, double pre-mounted knife shaft, top segment rollers, HHS cold glue 1 head, HHS hot glue with 2 heads, and transfer table. – 2nd station FA 52 with 4 folding pockets and transfer table, hydraulically height-lockable. – Knife shaft station SM 52 with 4 knife shafts, hydraulically height-adjustable. – Shingle delivery SM 52 Dsdsx Endujpfx Al Ajku – Vacuum/blast air pump – Window folding pocket – Various spare parts

Condition: ready for operation (used), AEG 6762440 / 00 – Power supply, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Dkodpfei D Tuiex Al Aju

Condition: like new (used), Year of construction: 2017, functionality: fully functional, input voltage: 380 V, Equipment: documentation/manual, M&R RADICURE D 36/6-4R little used, like new Dedpfx Alswaa Tde Ajku

Condition: ready for operation (used), Machine in good operating condition Dodpfx Asy Rnnqel Aeku

Condition: excellent (used), Offer includes: Ti52 with 6 pockets, 2nd station with 4 pockets, Tremat feeder, very good condition, year of manufacture 2009, including SAK-52 stacking device, VFZ52 available as an option. Dedpfx Aozmp Nrsl Ajku

Condition: ready for operation (used), AEG CEA 132.08 590.037644 electronic module, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Dedpfji D Tumox Al Aeku

Condition: ready for operation (used), AEG 029.049 635, card 029.049 636, revision 5, used, 100% functional. Dedpfx Aei D Tubol Ajku

Condition: excellent (used), Technical specifications: Retrofit in 2026 Working length: 2550 mm Max. bending capacity: 6.0 mm Bending allowance: 4.0 mm Diameter of upper roller: 200 mm Diameter of lower roller: 180 mm Hydraulic folding bearing Taper bending device Control panel with digital display Motor power: 5.5 kW Dkjdpfx Aljzbcwmj Asu Dimensions (length x width x height): approx. 3600 x 1150 x 1250 mm Weight: approx. 4.5 tons Condition: Very good, retrofit in 2026 The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2007, Heidelberg, station BUH 66-4, year of manufacture 2007. Dodpoz I Tzlefx Al Asku Optional: window frame pocket + sensor, light barrier, and ACC 2.4 control unit.

Condition: used, Second-hand gang saw motor (electric motor) AEG type AM 280 SX 4 for driving frame saws in sawmill applications. The electric motor is suitable for professional use in sawmills and supports the operation of frame saw systems for woodworking. Technical data: - Power: 75 kW - Pulley diameter: 330 mm Dkodozxzcuepfx Al Asu - Pulley width: 220 mm

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station, injection molding machine, plastic injection molding machine, plastic injection molding press Dkedpfxog Azpte Al Aju -Manufacturer: AEG, hydraulic unit from Krauss Maffei KM 250-1200 B injection molding machine -Motor: Bauknecht type AJ 225 MV4 Q4 55 kW / 1460 rpm -Individual components: see images -Dimensions: 1340/650/H760 mm -Weight: 557 kg

Condition: good (used), Year of construction: 2000, working width: 900 mm, total width: 1,800 mm, total length: 12,000 mm, total height: 3,550 mm, overall weight: 8,000 kg, For sale: Konig combi bread line 8/7/6/4 rows Includes: - TRO 240 hopper with oiling system - Konig Industrie Rex head machine Model A - Spreading conveyors - Proofing cabinet model: KGV V L Type: (900/500) K8 - V0 - (W) - R - RR900 - SCHN7/B - MO(WB) 1000 - STb8/7/4 - Stamping unit - Long roller - Seed station - Drop tables (8/7/6/4) (4 different drop tables with various belts included) - Storage trolley for the drop tables - Storage trolley for the flour sprinklers - Spare parts - Control cabinet Dkedpfxsxnb Iio Al Aju - All documents and electrical diagrams Weight range: 20 to 30 grams up to 110 grams Output: 18,000 / 24,000 pcs per hour Working width: 900 mm New drum in the Industrie Rex Many spare parts such as spreading belts, etc. It is possible to inspect the line on site. We can carefully load the line onto a truck/container. Do you have comments or questions? Please feel free to contact us. Best regards, Leo Holland

Condition: ready for operation (used), Round pile feeder MC Digital control 1st unit 6 plates 2nd unit 4 plates A76 stream delivery Djdsq Ik Ruopfx Al Aoku

Year of construction: 1987, condition: ready for operation (used), 5 metalworking machines from various manufacturers are offered. 1) Column drilling machine VEB BS16, year of manufacture: 1960, weight: 110kg. 2) Milling machine Fritz Werner. 3) Pillar drilling machine Infratirea 4GC02502, year of manufacture: 1987. 4) Pillar drilling machine Infratirea, year of manufacture: 1987. 5) Radial drilling machine Tianjin No. 4 Z3063×20. Dedpfx Aszqfxdol Asku

Year of construction: 2024, condition: new, - 6.000mm cutting length Dksdpfx Aopfcgajl Asu - min. cutting length 600mm - 5 saw supports - 80 - 140 mm cutting height - 4 KW saw motor - 1,5 KW stepless feed 10-30m/min Optional - Disposal conveyor belts

Condition: good (used), Technical specifications: Working width: 4050 mm Max. bending capacity: 6.0 mm Max. pre-bending: 4.0 mm Top roller diameter: 210 mm Side lower roller diameter: 210 mm Dsdpowkaalefx Al Ajku Middle lower roller diameter: 210 mm Conical bending device by tilting the two side rollers Hydraulic folding bearings Pivoting control panel with digital display Dimensions (length x width x height): approx. 6900 x 2300 x 1800 mm Weight: approx. 14 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2007, The Heidelberg Stahlfolder TH 82/6-4-2 - RFH, manufactured in 2007, is a high-quality folding machine with a size of 820 mm. Currently dismantled and located in Germany, this machine features a rotary feeder RFH-82. It includes three stations: the first station has 6 folding pockets of 82 cm with automatic pocket setting, the second station has 4 folding pockets of 66 cm with automatic pocket setting, and the third station has 2 folding pockets of 56 cm with automatic pocket setting. The machine also includes a stacking delivery SBP 66, a touchscreen monitor, and an MCT control system. The specific model is identified as TH82/6/4/2 with the machine number FH.HACO-00951. Format: 820 mm Equipment: Rotary feeder RFH-82 1.station: 6 folding pockets 82 cm Djdpfewnft Sjx Al Aoku Automatic pocket setting 2.station: 4 folding pockets 66 cm automatic pocket setting 3.station: 2 folding pockets 56 cm Automatic pocket setting Stacking delivery SBP-46+ MKE+VE Touchscreen-Monitor, MCT-control-system