Used Weiss Wt3-340/70 -72°C Bis +180°C for sale (67,763)

Condition: new, power: 154 kW (209.38 HP), fuel type: diesel, number of seats: 28, gearing type: automatic, color: white, brakes: retarder, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Iveco Daily City, new vehicle with COC; also available with CNG engine, Telma retarder Permissible total weight: 7,200 kg - Iveco Daily Urbano - City/Intercity bus built on Iveco C70 chassis - Air-suspended rear axle - Telma retarder - Length: 8.40 meters, Width: 2.40 meters, Height: 3.16 meters - Body made of fiberglass - Ribbed frame construction made of galvanized steel - Front air conditioning - Diavia air conditioning in passenger compartment 'Madrid' 15 kW (thus, dual A/C) - Double glazing - Twin-width rear doors in low-floor section (electric operation) - Front single electric door with recessed entrance Podpfx Ajx Nv Dkshysgk - Entry height front and rear max. 300 mm (without kneeling function) - Total capacity: 34 persons (24 seats — sleeper seats or city bus seats possible — plus 10 standing spaces, including 4 folding seats) - Wheelchair/pram bay - Convector heating in passenger area - Iveco auxiliary heater with water and timer - Interior lighting white/orange or white/blue - Grab rails with hand straps - 2 side luggage compartments + spare wheel hatch - Exterior color: white - Optional: LED headlights, custom paintwork, destination signs, interior monitor, WiFi, etc. available - ... Vehicle is eligible for subsidies in most German states and complies with Section 30d (4) StVZO This is an example vehicle. It is not in stock. Delivery time is approximately 6 months. Low-floor rear starting from €164,990.00. School bus variants available from €149,990.00.

Year of construction: 2000, operating hours: 104,382 h, condition: excellent (used), Vötsch Shock Test Chamber VT 7012 S2 System for extreme temperature cycling Temperature shock testing is used to test the resistance of components, devices, and other products to rapid changes in ambient temperature. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. These cyclical stresses and the accelerated aging caused by temperature changes reveal weaknesses in the test specimen. Vertical arrangement of the test chambers Ball screw drive for safe guidance of the car Cart load capacity 50 kg for VT3 7012 S2 All-around grilles in the car secure the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber Hot chamber can be used as a temperature storage unit, cold chamber as a temperature exchange unit Minimal energy consumption No compressed air required Manufacturer: Vötsch Type: VT 7012 S2 Type: Temperature shock test chamber Test chamber volume: 120 l Nominal voltage: 400 V Nominal power: 10 kW Nominal current: 25 A Refrigerant: R452A Cooling unit: Water-cooled Shock cooling (nitrogen cooling) via customer-supplied nitrogen External dimensions Width: 930 mm Depth: 2115 mm Height: 1970 mm Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Pgodpfx Ahox Exmtoyjk Protection class Device: IP 42 Operating panel: IP 20 Control cabinet: IP 54 Temperature test parameters for single-chamber operation | Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class ...Temperatur Temperature range Hot chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature deviation over time: ±2 K in steady state Temperature deviation over space: ±2 K in steady state in the car Heating rate, hot chamber: 11 K/min Cooling rate, cold chamber: K/min Heating rate, cold chamber: 2 K/min Cooling rate, hot chamber: K/min Observation window: 355 x 355 mm Pipe opening: 67 mm Year of manufacture: 2000 Operating hours: 104,382 Weight: 1000 kg Financing through our bank is also possible. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!

Year of construction: 1990, condition: good (used), Weiss temperature test chamber WT 11-18 KWP 500/40  Spring, summer, autumn and winter - your products must be able to withstand different temperatures during manufacture, transport, storage and use. The temperature test chambers from Weiss Technik help you to test the influence of thermal conditions on the properties, function and service life of your products. Pgodpfsh Izh Ijx Ahyjk Manufacturer: Weiss Technik Type: KWP 500/40 - 180 DU Designation: WT 11-18 Type: Temperature test chamber Test chamber volume: 500 ltr. Temperature range: -40°C to +180°C Outside dimensions: 110 cm wide, 173 cm deep and 204 cm high Dimensions inside: 80 cm wide, 85 cm deep and 85 cm high Pressure: 25 bar Voltage: 380 V Frequency: 50 Hz kVA: 4.7 Refrigerant: R 502 Year of manufacture: 1990 Condition: used complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Year of construction: 2018, condition: ready for operation (used), A compact Arburg injection molding machine is available. Clamping force: 180kN, daylight: 221mm/221mm, platen dimensions X/Y: 400mm/400mm, max. opening stroke: 275mm, min. mold installation height: 150mm, max. platen distance: 425mm, ejector force: 18kN, ejector stroke: 95mm, screw diameter: 15mm, weight: approx. 1900kg, operating hours: approx. 23300h. Documentation available. An on-site inspection is possible. Podpfx Aex E Ac Ejhysgk

Condition: new, ∗JCB TM180 SV C New Vehicle∗ - JCB Diesel by Kohler [48KW/64HP] - Emission Stage V with DPF - Lifting Height: 4.53 m - Rated Payload: 1,800 kg - 2-stage hydrostatic drive – 20 km/h - Tyres: GOODYEAR POWERLOAD 365/70R18 - Comfort Cab (ROPS/FOPS) - Radio pre-installation - Adjustable steering wheel - Fully opening windows - Heating - SELF-LOCKING DIFFERENTIAL FRONT AND REAR Front axle = 45% Rear axle = 25% - Servo single-lever control - Euro quick coupler - Fork carriage with 1,200 mm pallet forks - LED work lights front/rear/boom - Yellow rotating beacon - Right & left armrest - Roof-mounted wiper - Extended seat backrest Immediately operational, numerous additional attachments in stock. Psdpfoyfvmvex Ahyegk An appointment for viewing is expressly requested. On request, we will gladly provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Mihm (phone) will be happy to assist you. Further information available on our homepage. Subject to errors and prior sale! BSS, Quick-coupler, Road approval = Further Information = Please contact Tobias Ebert for more information.

Condition: good (used), Temperature controller, temperature sensor, temperature setting, signal converter, temperature converter, temperature limiter, electronic temperature controller, process controller Pgsdpfsw Ucz Sjx Ahyek -Temperature controller: analog, 0 to 35 °C -Adjustment: with key, see photos -Voltage: up to 380 volts -Switching capacity: 30W / 50VA -Transport dimensions: 330/300/H150 mm -Weight: 1.5 kg

Condition: used, Temperature Controller, Temperature Sensor, Temperature Setting, Temperature Converter, Temperature Limiter, Electronic Temperature Controller, Temperature Switch, Thermostat, Sensor, -Manufacturer: Trafag, thermostat temperature switch unused original packaging -Type: 471 2331 342 27 8319 0065 90 -Temperature range: 20 to 150 °C -Cable length: 3000mm Pgjdpfx Aelc Uiiehyok -Number: 2 thermostats available -Price per piece -Dimensions package: 245/130/H80 mm -Weight: 1.1 kg/pc.

Condition: used, Temperature controller, temperature sensor, setting for temperature, signal converter, temperature converter, temperature limiter, electronic temperature controller -Manufacturer: Jumo, temperature controller 0 to 250 °C -Type: unfortunately without type designation Pgodpsm Ui Ihsfx Ahyjk .: 624603-10114-JR10A -Dimension: 130/100/H95 mm -Weight: 0.5 kg

Condition: used, Temperature sensor, duct temperature sensor, screw-in temperature sensor, temperature sensor -Temperature sensor: screw-in temperature sensor -Measuring range: 0 to 300°C -Accuracy class: KL.1 Pgsdpfx Aoirukuehyjk -Measuring probe: Screw-in length 200 mm -Transport dimension: 330/260/H140 mm -Weight: 1.3 kg

Condition: used, Sensor, write head, read head, tactile bore measurement -from: warehouse liquidation Pgedpfed E Uqgjx Ahyok -Product group: LF (70/455 kHz) -Dimension: 40 x 33 x 61.5 mm -Connection: M12x1 socket, 5.00 m, PU -Protection class: IP 67 -Weight: 450 g

Condition: good (used), Clamping angle for workpiece clamping -Dimensions: 180/70/H100 mm Pjdpfx Aheb E N Ttjyogk -Thickness: 18 mm -T-slots: 12 mm -Surface: milled -Weight: 3.5 kg

Condition: used, mileage: 381,511 km, first registration: 06/2002, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: other, gearing type: mechanical, Year of construction: 2002, Damages: none Psdpfx Aheydcmtoysgk = More information = Front axle: Steering Registration number: TJZ-57-N = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible.Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present.We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration.Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m.You can find us at:Middelingenseweg 22 5321 JH Hedel The NetherlandsAnd reach us at:Trucks: Passenger cars: Website: Email:

Condition: excellent (used), TIRA Type: TCC 7120 Temperature range: -75°C / +180°C Air-cooled condenser Temperature stability (over time and in the center of the usable space) ±0.1°C ... ±0.3 °C Maximum temperature change rate Heating: 4°C/min Cooling: 3°C/min Humidity range: 10% to 98% relative humidity Humidity stability over time ±1% ÷ ±3% Dew point range for long-term tests +2 / +94 °C Dew point range for short-term tests -20 / +2 °C External dimensions (L x D x H) 1320 x 2235 x 2137 mm Test space dimensions (L x D x H) 1000 x 1130 x 1020 mm Test chamber volume: approx. 1152 liters Max. load per grid: 50 kg Maximum floor load of the test chamber: 100 kg Refrigerants: R404A and R23 Pgodpfx Aswfddwjhysk Power supply: 400V + 6%/-10% / 50Hz / 3P+N+PE Rated power: 10.2 max. 17.5 kW Rated current: 19.5 max. 32.0 A Noise level: approx. 80 dB(A) Weight: 1180 kg For your safety, the following information is provided as a buyer! The following steps are carried out in advance on our chambers: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), CTS Type: T-40/600 /011232 CTS Temperature Test Chamber, Water-Cooled Includes metal struts to increase the floor load-bearing capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 1900 mm, width approx. 1050 mm, depth approx. 1850 mm Temperature operating range: Temperature range -40 to +180°C Temperature deviation ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R-404A Weight: 550 kg Pjdpfxswfdnij Ahysgk For your safety, please note the following information! The following steps are performed on our chambers in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer a climatic test chamber. Air cooled Nominal test chamber volume: 280 liters Dimensions Test chamber outside: 1500 x 2040 x 1075 mm Fan motor and door disassembled: 1500 x 1940 x 925 mm test chamber: 720 x 690 x 560 mm door, clear width: 720 x 690 mm viewing window, heated: 500 x 600 mm Temperature range +5 to +100 C heating: 4,0 K /min Cooling: 0.6 K /min Climate range +10 to +95 C Humidity range: 10 to 95 % r.H. Humidity difference, temporal: ≤ ± 3.0 Water connection humidifier: city water or distilled water 20l reservoir tank. Mains connection: 400 V 3/N/PE, AC, 50 Hz Power requirement max : 6,3 kW Weight : 500 Kg Type : 3416/16 Refrigerant : R134a For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Pgjdpfjiz Tqcsx Ahyek Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Espec Type: PHP - J3 Technical data: Air-cooled Temperature and humidity range Room temperature +10°C to +100°C / 40 to 98% rel. LF Temperature fluctuation ±0.3 K Humidity fluctuation ±2.5% Podpfxotzbzcj Ahyogk Volume 398 liters Dimensions: Internal dimensions: Width 600 mm x height 830 mm x depth 800 mm External dimensions: Width 1010 mm x height 1690 mm x depth 1273 mm Mains voltage: 400 VAC 3∅ 50 Hz Maximum current 400 VAC 8.3 A Weight: 335 kg Scope of delivery: Espec climatic test chamber The following information is for your safety as a buyer! The following points are carried out on our chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Espec Type: PHP - J3 Technical data: Air-cooled Temperature and humidity range Room temperature +10°C to +100°C / 40 to 98% rel. LF Temperature fluctuation ±0.3 K Humidity fluctuation ±2.5% Volume 398 liters Dimensions: Internal dimensions: Width 600 mm x height 830 mm x depth 800 mm External dimensions: Width 1010 mm x height 1690 mm x depth 1273 mm Psdpfotzbz Aex Ahysgk Mains voltage: 400 VAC 3∅ 50 Hz Maximum current 400 VAC 8.3 A Weight: 335 kg Scope of delivery: Espec climatic test chamber The following information is for your safety as a buyer! The following points are carried out on our chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Trumpf TRUMPF TruDisk 6602 (4C) High-Power Disk Laser with up to 6.6 kW Type: TruDisk 6602 (4C) The TRUMPF TruDisk 6602 (4C) is a high-performance disk laser offering approximately 6.6 kW of continuous power output – perfectly suited for welding, cutting, and surface treatment processes for metals such as steel, aluminum, copper, etc. System type: TruDisk 6602 (4C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: November 2012 Drawing number: 20-10-02-A5 No further in-house inspection has been performed. Operating hours could not be read out. The laser was operating flawlessly until decommissioning. Key Technical Features: • Power: Continuously adjustable from 80 W up to 6,600 W, max. 6.6 kW for machine tool applications • Beam quality: < 2 mm·mrad for excellent focus handling • Wavelength: 1030 nm (infrared), adaptable to green wavelength for specific models • Output options: Up to 4 laser outputs (4C) for simultaneous supply of multiple process cells • Cooling system: Integrated heat exchanger (up to 28°C inlet temperature), optional compressor cooling (up to 38°C) • Modular and service-friendly: Compact footprint (< 1 m²), modular components for fast maintenance and service Benefits & Applications • Maximum process stability: Real-time power regulation ensures reproducible results • Reflection resistance: Patented resonator design enables welding of reflective metals such as copper and aluminum • Industry 4.0 ready: Sensor-integrated monitoring system, OPC-UA interface for condition monitoring & predictive maintenance Pedpfxjwy Uyxs Ahysgk • Energy efficiency: Up to 50% reduction in power consumption thanks to intelligent pulse control and energy-saving modes • Versatility: Application range includes welding (including BrightLine for nearly spatter-free seams), cutting, hardening, casting processing, additive manufacturing, laser wire deposition welding, and more Suitable Use Cases: Ideally suited for industrial high-power laser applications: Application | Features ---|--- Automotive structural part manufacturing | Deep penetration welding with high reproducibility Copper welding | Particularly suitable with green wavelength (> 95% spatter reduction) Remote hybrid welding | Fast processing of large surfaces with robust beam Additive manufacturing & hardening | Enabled by excellent beam quality and compact design Main Technical Data Property | Specification ---|--- Laser power | Up to 6,600 W (6.6 kW), continuous Beam quality | < 2 mm·mrad Wavelength | 1030 nm (infrared) Number of outputs (4C) | Up to 4 simultaneously usable fiber outputs Fiber connector diameter | 100–600 µm (depending on configuration) Beam delivery | Fiber-based, passive (no deflection mirrors required) Cooling | Water/air-cooled, internal or external chiller Dimensions | Approx. 1000 × 800 × 2100 mm (W×D×H, variant-dependent) Weight | ~800–1200 kg (excluding cooling) Power supply | 380 V - 10% ... 460 V +10%, 3-phase AC + PE, 38 kW / 41 kVA, 59 A / 400 V, 50–60 Hz Control | TruControl 1000/3000, OPC-UA interface Safety standards | Laser safety class 4 according to EN 60825-1 Weight: approx. 1200 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data. Information may be subject to alteration!) We are happy to answer any further questions you may have by phone.

Condition: excellent (used), Vötsch Type: VBT 03/500 Air-cooled Temperature test chamber with spray device Technical description: Data for temperature tests without water: Temperature range -30°C to +80°C Temperature deviation in steady state according to IEC 60068-3-5 dependent on the test chamber temperature over time ± 1 K Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min. Cooling: approx. 2 K/min. Data for temperature tests with water Temperature range +5°C to +80°C Possible water level -10 mm to 540 mm Water level = -10 mm The water level is below the insert grid Water level = 0 mm The water level is at the top edge of the insert grid Data for standard spray device Number of spray nozzles: 6 Spray volume per nozzle: 0.5 l/min Data for spray device according to EN 539-2, Method B Number of spray nozzles: 6 Spray volume per nozzle: 4.5 l/min Additional flooding nozzles: 2 Spray volume of additional nozzle: 6 l/min Compressed air consumption: approx. 3 m³/h Podpfswc Nvgsx Ahyogk Data for water tank with pre-temperature control Volume: approx. 2000 l Temperature range for pre-temperature control +5°C to +40°C Temperature change duration Cooling of +18°C to +5°C approx. 15 h Heating from +15°C to +40°C approx. 10 h Installation and Operation Data: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Plug-ins 1 50 mm diameter plug installed on the left Test chamber capacity: approx. 500 liters Refrigerant R-404a Electrical connection: Nominal voltage 3/N/PE AC 400V ± 10% 50Hz Nominal power approx. 26 kW Nominal current approx. 44.0 A (neutral conductor loaded) Fuse protection 63 A gG, on-site Weight approx. 890 kg net For your safety, please note the following information! The following steps are carried out on our chambers in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer a BIA multifunctional cabinet. BIA Multifunctional Cabinet Temperature range +15°C to +30°C and humidity Refrigerant: R-404A 230V 50Hz 10A Type: C890TH For you as a buyer the following information for your safety! Pjdpfx Aofktnyehyegk The following points are carried out at our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We can answer further questions for you on the phone.

Condition: excellent (used), CTS Temperature test chamber T-55/1000 Li water-cooled Temperature range: -50°C to +100°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Nominal current: 18 A Compressor: TFH2511Z / TFH2511Z Refrigerant R404A/R23 The type designation of the CTS cabinet series is composed as follows: z. e.g. type T -55/1000/Li 1) T means: temperature 2) -55 means: lower temperature -55 °C 3) 1000 means: 1000 liter test chamber volume 4) Li means: special equipment for tests with lithium-ion accumulators Control: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for on-site test material control Test room lighting: energy-efficient, high-intensity LED light strip mounted on the door Insert grid: Stainless steel, support surface 970 x 980 mm Load per shelf max. 35 kg Total load with max. grating load 100 kg 1a Feed-through NW50 1b Feed-through 2x NW125 1c Entry port 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat compensation approx. 4000 W at +20°C approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without heat compensation and without additional equipment. Options may affect the performance data. Dimensions: Test volume 1000 liters Test chamber dimensions Height, approx. 1000 mm, width, approx. 860 mm, depth, approx. 1100 mm External dimensions Height, approx. 1950 mm, width, approx. 1270 mm, depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Nominal current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (according to DIN EN ISO 3744 measured at a distance of 1 m from the front) Mass approx. 1000 kg Heat output to the installation room 10.4 kW Cooling unit: water-cooled, low-noise, fully hermetic Infinitely variable output adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components Pgsdpfx Aovba Rajhyek 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Espec Type: TSA-202E-W Temperature Shock Chamber, Water-Cooled Cold Chamber: -55°C to 0°C Hot Chamber: +50°C to 200°C System: Two-zone test with damper control Temperature fluctuation ±0.5°C Hot Chamber: Temperature heating time: Ambient temperature (20°C) to +200°C within 15 minutes. Cold Chamber: Temperature reduction time: Ambient temperature (20°C) (20°C) to -55°C within 35 minutes. Temperature recovery: within 5 minutes. Internal dimensions (W x H x D mm): 650 x 460 x 670 External dimensions (W x H x D mm): 1550 x 1900 x 1670 Approx. 200 liters Power supply: 400 V AC 50Hz: 65 A Refrigerant: R404A 5 kg R23 2.0 kg Weight: Approx. 1200 kg For your safety as a buyer, please note the following: The following steps are carried out in advance on our chambers: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone. Pgodpfswc R A Ijx Ahysk

Condition: excellent (used), Here we offer a Heraeus heat and air circulation drying oven. Pjdpfxed Hpv Ao Ahysgk Heraeus heating and air circulation drying oven up to 300 ° C Manufacturer / type: Heraeus UT 6060 Properties: Temperature: 300 ° C Net volume: 52 litres Weight (empty): 53 kg Internal dimensions: Depth 403 mm, width 340 mm, height 380 mm External dimensions: Depth 744 mm, width 535 mm, height 552 mm Nominal voltage 230 v, rated frequency 50/60 Hz, rated current 6,8A, output 1, 50kW Including 2 deposits Type: UT 66060 Condition: pre-owned / used Scope of delivery: (See image) (Errors and omissions in the technical data, information are reserved!) We can answer questions on the phone for you.

Condition: as good as new (ex-display), Year of construction: 2018, Zwick / Roell Type: EC76G 1-1-2-0 361763 Description: Zwick / SFL Severn Furnaces Limited Zwick/Roell temperature chambers for tests in the temperature range - 80°C to + 250°C Traceable test results and perfect integration of the temperature chamber into the test system. Temperature control chambers: width 600 mm x height 1000 mm Temperature control chamber for the AllroundLine Cooling using LN2 (liquid nitrogen) Pgjdpfx Ahelguwwjyek (-80°C external connection, not included) Voltage: 400/230 16A 3N〜50/60Hz Power: 4500W Weight: 180 kg Condition: unused Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Year of construction: 2010, condition: excellent (used), Here we offer you a Heraeus Vötsch temperature test chamber. Vötsch temperature test chamber VLM 3068/S air-cooled Pederbiyfepfx Ahysgk (building material test chambers loaded from above) Control panel The control panel is mounted on a console on the temperature test chamber. By control and operating commands can be triggered by simply touching the function symbols. can be triggered. The operating instructions for the control panel are enclosed Main switch The main switch is located at the front of the temperature test chamber. Air treatment room The air treatment room is located in the test room and contains the components required for temperature control. In the air treatment room, the air is tempered (cooling/heating) and circulated by the test room fan. circulated by the test room fan. The air is sucked in at the center of the side wall and enters the test chamber again via the air baffles on the long sides. Feed-throughs The temperature test chamber can optionally be equipped with feed-throughs. Through these can be used to route cables and test equipment into the test chamber. Entry port front 2 x 82 mm ∅ rear 1 x 85 mm ∅ Internal dimensions Width 2000 mm Depth 570 mm Height 600 mm External dimensions Width 3000 mm Depth 870 mm Height 1060 mm Technical data: Data for mechanical load: Max. load with test material Test area floor (evenly distributed over the surface) 600 kg Point load 50 kg Data for temperature tests: Temperature range -30 °C to +125 °C Temperature deviation over time in the center of the usable space ±1 K Temperature change rate Heating approx. 1 K/min Cooling approx. 2 K/min Data for operation: Nominal voltage 3/N / PE AC 400 V ±10% 50 Hz Rated power 3 kW Rated current 9 A Customer fuse 16A slow-blow Temperature test chamber VLM 3068/S Test chamber volume approx. 680 l Weight approx. 700 kg Refrigerant: R-404A Noise measurement Sound pressure level approx. 68 dB(A) Type: VLM 3068/S Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.