Used Vinyl Press / Lp Press for sale (13,788)

Condition: reconditioned (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 07/2027, type of input current: three-phase, year of last overhaul: 2026, machine/vehicle number: 2026, Roll forming machine Fortuna Automat A 3 E + Gedpfx Agjzbz Hao Rjiu Top model with automatic shut-off Head cleaning towards the rear Partial head with stainless steel blade – NEW Dough input up to 2400g, depending on the model Dough divider with 3 forming plates Robust technology Connection: 400V, 16A-CEE plug Dimensions: 720 x 800 x 1510 mm (W x D x H) Used machine, refurbished with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience!

Condition: repair required (used), functionality: limited functionality, year of last overhaul: 2025, type of input current: three-phase, input voltage: 400 V, Roll divider WP Rotamat EN Dough dividing and rounding machine Stationary machine, 30-piece capacity, ideally suited for dividing and rounding dough with a plastic knife head, for round 70g and square 80g rolls Gijdpjzbz Ecofx Ag Rsu Connection: 400 V, 16A CEE plug Dimensions: 650 x 670 x 1610 mm (W x D x H) Used machine (Rounding plate bearing is defective and should be replaced)

Condition: new, pressing force: 30 t, stroke length: 300 mm, - Capacity: 30 tonnes - Cylinder stroke: 300 mm - Working width: 700 mm - Pressure gauge - Emergency stop Gedewd I Htspfx Ag Reiu - 400 V

Condition: ready for operation (used), Hydraulic press PYE 160 S - 2 units available Specifications: Capacity: 160 tons Working pressure: 16 MPa Upward speed: 125 mm/sec Downward speed: 200 mm/sec Slide stroke: 500 mm Daylight: 360 mm Max. distance between table and slide: 800 mm Ejector capacity on the table: 63 tons Max. extraction depth: 200 mm Voltage: 380 V Total required power: 17 kW Nominal current: 35 A Total weight: 7 tons Hydraulic press ERFURT PYE 100 S - 2 units available Capacity: 100 tons Table dimensions: 750x560 mm Ram dimensions: 530x400 mm Table height above floor: 710 mm Max. shut height: 800 mm Throat: 360 mm Stroke: 500 mm Gjdpfx Agszdanzs Rsiu Downward speed: 320 mm/sec Upward speed: 200 mm/sec Connection power: 17 kW Press weight: 5 tons

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, operating hours: 8,451 h, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 170 mm, operating speed: 10 mm/s, reverse speed: 170 mm/s, table width: 90 mm, table length: 1,270 mm, table height: 850 mm, throat depth: 350 mm, clearance between the columns: 1,050 mm, oil tank capacity: 80 l, total length: 2,150 mm, total width: 1,650 mm, total height: 2,300 mm, overall weight: 3,250 kg, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, safety light barrier, 2016 Ermaksan Speed-Bend Pro 1270 x 40 CNC Press Brake – 6 Axis – Delem DA-66Te Control Used 2016 Ermaksan Speed-Bend Pro 1270 x 40 CNC hydraulic press brake for sale in Ireland. 6-axis CNC press brake with Delem DA-66Te graphic control, Y1, Y2, X, R, Z1 and Z2 axes, tooling, laser guards and only 8,451 hours. Manufacturer: Ermaksan Model: Speed-Bend(SB) Pro 1270 x 40 Axes: 6 Year: 2016 Capacity: 1270mm x 40T Control: Delem DA66Te Description 2016 Ermaksan Speed-Bend Pro 1270 x 40 CNC Press Brake, a compact, high-quality 6-axis CNC hydraulic press brake ideal for precision sheet metal bending, fabrication workshops, engineering companies and production environments. This Ermaksan Speed-Bend Pro 1270 x 40 offers a bending length of 1270 mm and a bending power of 40 tonnes. It is fitted with a Delem DA-66Te graphic CNC control, providing a clear touch-screen interface for accurate programming, bend sequence calculation, tooling setup and repeatable production bending. The machine is in very good condition and has completed only 8,451 hours. It comes complete with Euro-style top and bottom press brake tooling, laser guards, foot pedal, quick-release top tool clamps and rear safety doors, making it a well-equipped used press brake ready for immediate inspection and production use. This is a superb opportunity to purchase a late-model, compact Ermaksan CNC press brake with a desirable 6-axis specification, ideal for companies looking for a reliable used hydraulic press brake in Ireland, the UK or Europe. Key Features Manufacturer: Ermaksan Model: Speed-Bend Pro 1270 x 40 / SB PRO 1270-40 Year: 2016 Type: CNC hydraulic press brake Bending length: 1270 mm Bending power: 40 tonnes Axis configuration: 6 Axis CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Control: Delem DA-66Te Graphic CNC Control Hours: Only 8,451 hours Condition: Very good condition Tooling: Complete with Euro-style top and bottom tools Safety: Laser guards and rear safety doors Clamping: Quick-release top tool clamps Includes: Foot pedal Suitable for: Sheet metal fabrication, precision bending, general engineering, subcontract fabrication and production bending Technical Specifications – SB PRO 1270-40Model: SB PRO 1270-40 Bending length: 1270 mm Bending power: 40 tonnes Distance between columns: 1050 mm Y-axis rapid speed: 140 mm/s Y-axis working speed: 10 mm/s Y-axis return speed: 170 mm/s X-axis travel: 500 mm X-axis speed: 500 mm/s R-axis travel: 250 mm R-axis speed: 350 mm/s Z1 / Z2-axis travel speed: 1000 mm/s Backgauge finger blocks: 2 Oil capacity: 80 litres Motor power: 5.5 kW Stroke: 170 mm Daylight: 387 mm Throat depth: 350 mm Table height: 850 mm Table width: 90 mm Machine Dimensions: 2150 x 1650 x 2300mm Machine weight: 3250 kg Standard / Included Equipment This used Ermaksan Speed-Bend Pro press brake is supplied with: 6 CNC axes: Y1, Y2, X, R, Z1 and Z2 Delem DA-66Te graphic CNC control Euro-style top press brake tools Gisdpfx Agozdak Aj Rsu Euro-style bottom press brake tools Laser safety guards Foot pedal Quick-release top tool clamps Rear safety doors Backgauge finger blocks Sheet support arms Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 1995, STC-Ref: G-791-0199 Gsdpfx Aezc Un Teg Roiu IRAM-12 ,Year: 1995 - paper drilling machine 4 spindles - additional accessories (drillers) --> available: 07/2026

Condition: new, This 60 ton motorized workshop press has a movable cylinder (left-right) and a height-adjustable work table. Equipped with pressure control, 2 speeds, a joystick and a hand pump for precise pressing tasks. Made in Europe 60 ton workshop press electrically operated, manuf. RHTC – type M/H-M/C-2 This 60 ton motorized workshop press has a movable cylinder (left-right) and a height-adjustable work table. Equipped with pressure control, 2 speeds, a joystick and a hand pump for precise pressing tasks. The workshop press is produced in the Netherlands. Features Sliding cylinder (left-right) Integrated pressure gauge Pressure regulator Giodpjwfcq Nofx Ag Rju Two-speed hydraulic unit Height-adjustable work table Joystick for cylinder operation Hand pump for precise press work Options: Foot pedal or hand remote control for operating this 60 ton workshop press V-block set for additional support

Condition: good (used), Year of construction: 1990, Roll compactor, Bergmann – used: Price ex works: only €950 (net) Manufacturer: Bergmann Type: PS 8100E Year of manufacture: 1990 Serial number: 05 3658 2845/90 Pressing pressure: to Weight: 750 kg 400V, 5.5 kW Condition: good Available: from Q4/2026 Location: Hamburg Giedpfxszbygre Ag Rou Efficient waste compaction: A special steel drum enables effective collection, shredding and compaction of the waste, reducing its volume up to ninefold. Continuous filling: The machine allows for continuous filling by all users. The feed shaft can also remain open during the working process, which facilitates and accelerates waste compaction.

Condition: good (used), Year of construction: 1999, Baling presses, HSM, 30-ton pressing force – used: Price ex works: only €2,950 (net) Manufacturer: HSM Gsdpfx Aezbygfog Roiu Type: 225.1 VL Year of manufacture: 1999 Machine number: 6124.834. N Serial number: 200014505 Pressing force: 30 tons 400V, 5.5kW Condition: good Available: from Q4/2026 Location: Hamburg

Condition: used, Older knee-lever press. Godszbx Twjpfx Ag Rjiu

Condition: used, book press Gisdpfxszbx Tko Ag Reu

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,000 kg, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, volume flow: 795 m³/h, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Gjdozbxwiepfx Ag Roiu Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: reconditioned (used), Year of construction: 2019, operating hours: 3,000 h, functionality: fully functional, pressing force: 70 t, overall weight: 9,500 kg, year of last overhaul: 2025, filling opening width: 420 mm, filling opening length: 1,250 mm, Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Filling opening chute 420 x 1,250 mm (d x w) Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Throughput capacity for empty beverage cans with: one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material properties: According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet offcuts, sheet steel as well as aliminium, brass and copper waste. Gijdpezbxvlsfx Ag Rou Condition of the baler: The packing press has been fully overhauled in our workshop. The press is in very good condition; please see the demonstration video following the overhaul. The machine sustained transport damage whilst being moved. The control cabinet was damaged and slightly dented by a forklift truck, and the main switch (on/off switch) was damaged. These damages are reflected in the significantly reduced sale price and must be repaired by the buyer at their own expense. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, throat depth: 450 mm, Very good condition! With gearbox: Capacity: 300 t Strokes: 35 spm Throat depth: 450 mm - Pneumatic clutch - Ram weight balance Ram stroke: 20 - 140 mm Ram adjustment: 80 mm Gisdpfx Aezc Rw Reg Rju Motor power: 30 HP

Condition: used, Year of construction: 2018, HACO EMS30100 press brake Gedpfx Aoynkxlsg Roiu

Condition: reconditioned (used), functionality: fully functional, total length: 800 mm, total width: 720 mm, total height: 1,510 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 07/2027, type of input current: three-phase, year of last overhaul: 2026, Dough dividing and molding machine +++ Top-of-the-line roll press +++ Fortuna Automat, size 3+ Godpfxjw H H N Sj Ag Reiu Head cleaning system with electric rear movement Dough dividing head with stainless steel blade, NEW Robust technology Dough divider with 3 molding plates Connection: 400V, 16A-CEE plug Dimensions: 720 x 800 x 1510 mm (W x D x H) Used machine, refurbished with warranty + spare parts service Options: Platform or trolley Molding plates Service package Maintenance contract Delivery service Spare parts box Training and commissioning

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 24 months, total width: 600 mm, total length: 700 mm, total height: 1,520 mm, electrical fuse: 16 A, input frequency: 50 Hz, input voltage: 400 V, power: 1 kW (1.36 HP), type of input current: three-phase, DGUV certified until: 07/2028, overall weight: 375 kg, NEW NEW Bread Roll Press NEW NEW Semi-automatic dough divider and rounding machine, TOP model: 4-14 NEW proven technology … the original! Knives with a simple cleaning position! with 3 rounding plates Dough ring coated with easy-click system Dividing range: 130 to 250 grams/piece Dividing: 14 pieces Machine is mobile DGUV V3 tested, only available from us Connection: 400V, 0.75 kW, 16A-CEE plug Dimensions: 600 x 700 x 1520/2200 mm, WxDxH NEW machine & SAB tested Giedpfju Eaudox Ag Rsu with warranty + spare parts service Option: Leasing & rental service Rounding plates Maintenance contract Service package Instruction & commissioning Loan machine service Many more bread roll presses in stock!

Condition: reconditioned (used), functionality: fully functional, total height: 1,520 mm, year of last overhaul: 2026, DGUV certified until: 07/2027, warranty duration: 6 months, total width: 600 mm, total length: 700 mm, input voltage: 400 V, Gostol semi-automatic roll divider, model 4-14 proven technology ... already successfully used in many applications! Stainless steel knives with 3 dividing plates robust design divides into 14 pieces DGUV V3 certified – only available from us Connection: 400V, 16A CEE plug Gjdeyagtijpfx Ag Roiu Dimensions: 600 x 700 x 1520/2200 mm (W x D x H) New machine & SAB certified with warranty + spare parts service We also have other top-quality dough dividers in stock!

Condition: good (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, year of last overhaul: 2022, Fortuna Automat A 4 E roll former Dough divider and rounding machine Roll former Fortuna Automat, size 4 E with rounding stop Head cleaning with electric motor with stainless steel knives Dough input 1200 to 3600 g with rounding disc Connection 400V, 16A-CEE plug Gisdeywadqjpfx Ag Rou Used machine

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Pneumatic press for edge-gluing wood panels. TECHFA type PTD 6000 Max. dimensions of glued elements: Giodpjyivr Hsfx Ag Rsu - length: 6300 mm - width: 160 mm - height: 850 mm Press is divided into 4 sections.

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, The machine is fully operational and in good condition. Working dimensions: 3200 x 2200 mm Dimension adjustment is electrically controlled from the control panel. Powered by a hydraulic unit. Gijdoxmr Rxjpfx Ag Reu

Condition: used, Year of construction: 2006, functionality: limited functionality, number of ink cartridges: 7, color channels: 7, counter reading (color): 45,000,000, We are offering this used HP Indigo ws4500 digital printing press, manufactured in 2006. Model: HP Indigo ws4500 Serial number: IL - 22600014 Article number: CA207A Weight: 1750 kg Frequency: 50/60 Hz HP Indigo WS4500 digital printing press – including a comprehensive stock of spare parts and consumables For sale: HP Indigo WS4500 roll-fed digital printing press, manufactured in 2006, with approximately 45 million prints. The machine was in continuous production until early 2026 and can be inspected by appointment. Ideal as a production machine, a source of spare parts, or for entering the HP Indigo label and packaging printing market. Equipment & Features Functional, last used in production Modifications to the web guiding system (dancer rollers instead of vacuum boxes) Additional web guiding and cutting unit integrated Extensive stock of consumables and spare parts included Inspection and functional test possible by appointment Important Notes Sold as used, without warranty Disassembly, loading, and transport are not included in the offer The machine must be disassembled and collected by the buyer Location: 40764 Langenfeld (North Rhine-Westphalia) If you are interested, we will gladly provide further photos, technical information, and an overview of the available consumables. Giedpfx Agszc I Awo Reu If you have any questions or require more information, please send us a message or call us.

Condition: good (used), Year of construction: 2011, 2011 Bystronic Xpert 150 5-Axis CNC Press Brake with Bystronic CNC Control Gisdpjzc Irxefx Ag Rsu Pressure: 150 tons. Bending length: 4100 mm. Max. stroke: 215 mm. Axis: Y - beam up and down. X - stop approach and bending distance setting. R - stop up and down. Z2 - stops sideways and towards each other. Z1 - manual feed. Automatic stops. Bystronic Fast Bend laser system. S/No: 11530057 (2011). Note: Machine located in Czestochowa, Poland. Machine weight: 11,800 kg.

Condition: excellent (used), Year of construction: 2021, 2021 Baykal APHS 41240 4-Axis CNC Press Brake with Delem DA-66T Control Giodpfx Aezc Ilrjg Rsu Pressure: 240 tons. Bending length: 4100 mm. Control: Delem DA-66T. Axles: Y - beam up/down, X - stop approach and bending distance setting, R - stop up/down, Crowing (bending angle compensation). Power supply: 3-phase. S/No: 28635. Note: Equipped with a large set of bending tools. S/No.28635 (10/2021). Note: Machine located in Czestochowa, Poland.

Condition: used, Year of construction: 2006, 2006 Amada HFT 170-4L 4-axis CNC Press Brake Pressure 170 Ton. Bending Length 4,230mm. Distance Between Columns 3,760mm. Stroke 350mm. Opening Height (Daylight) 620mm. Throat 420mm. Travel Speed 160mm/sec. Return Speed 100mm/sec. Control: CNC. S/No.HFT170-4LN060097 (2006/04) With Foot Switch. Machine Weight 14,800kg. Gsdpfx Aszc Illjg Rjiu