Used Various Emergency Power Generators for sale (53,072)

Condition: used, SincoTec Ibodpfjzii Awjx Ahysc Type: Exciting Mot Resonance test bench POWER SWINGLY 20 kN The POWER SWINGLY BigTable resonance test bench is designed as a dual-mass vibrator. It consists of a vibration head, which is excited via an asynchronous motor with frequency control and an eccentric motor. The vibration head is located in the upper part of the machine and generates the dynamic amplitude. The vibration head is supported on the upper traverse via pre-tensioned coil springs and is guided centrally. The center load drive is located in the lower part of the machine and applies the static preload with the aid of a geared motor via a spindle drive. The test chamber is located above the mounting table and is bounded upwards by the adjustable traverse. The control of the test bench is carried out by the EXCITING MOT control system. The complete control electronics for the control system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated steel sheet and meets protection class IP 50 according to EN 60529. Technical data: General data of the test bench: Overall height of the test bench 1840 to 2240 mm Height of the machine table 1030 mm Width of the test bench 800 mm Depth of the test bench 1500 mm Height of the test chamber max. 600 mm (without force sensor) Free column passage 550 mm Maximum force amplitude 10000 N Maximum total force ±20000 N Maximum stroke ±5 mm Test frequency 30 to 110 Hz Accuracy of the measuring sensors min. class 1 (according to DIN EN 10002-3) Weight of the test bench approx. 1880 kg Max. weight of the clamping device 150 kg General data of the control cabinet: Overall height of the control cabinet 1900 mm Height of the table top 1080 mm Width of the control cabinet 650 mm Depth of the control cabinet 700 mm Weight of the control cabinet 152 kg Color RAI 9006 (white aluminum), table top Midnight Conditions for the installation site: Space requirement 2.5 x 2.5 m Required ceiling height 2.8 m Floor load-bearing capacity 170 N/cm² Voltage supply 400 V / 50 Hz (right-rotating field) Connection plug CEE socket, 5-pole, 16 A Fuse 16 A Connection and environmental conditions Mains conditions: Voltage 400 V three-phase with PE conductor and protective earth, right-rotating field Voltage fluctuations < ± 10% Short-time voltage dips < 20 ms Limits for permanent interference Radio interference level A according to VDE0871 Frequency 50 Hz ± 1% Protective earth Ground resistance < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: new, Röhm 20641, KFM 130/2, Power chuck 130 MO KFM 2-jaw, ZA110 Isdpjivdq Refx Ahyebc Total diameter: 130 mm PF003850 Number of jaws: 2 Jaw stroke: 5.5 Internal diameter: 46 mm Width: 63 mm Manufacturer's specifications for technical data: Max. actuating force: 5 kN Max. total clamping force: 11 kN Max. speed: 3950 rpm Approximate original new price: €4500 You can find more power chucks – new and used – in our shop! International shipping costs available upon request! Buy power chucks and other products at affordable prices – Here you buy products from a professional for professionals – You will find more attractive offers in our SHOP.

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. Dimensions (L/W/H) 6100x1500x2300 mm Weight 950 kg 1 NEW drilling and milling center Götzinger Power Drill 300 With the Götzinger PowerDrill you can, depending on the type and design: - Drill on the front and on the long side - Dowels of front doors, pegs, fighters - The drilling patterns are freely programmable - You can drill: handle slides and corner bearings, with quick-change multiple spindle - You can: Milling lock case, pusher and PZ as well as 3D belts and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, save and call again Base frame in sturdy design, covered with sheet metal Table top 1800 x 200 mm Processing unit: X-axis - 500 mm working travel Y-axis - 0-120 mm Z-axis - 0-105 mm (above table) Horizontal aggregates: 1 horizontal drilling unit (dowel drilling unit left) ----- Drilling motor 220 V, 1.1 kW Collet holder ER 25 4,000 - 11,000 rpm adjustable 1 milling unit horizontal for lock case ----- Ibjdpeif Az Uefx Ahysc Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 horizontal drilling unit (dowel drilling unit right) ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 Vertical aggregates: 1 drilling unit vertical ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 1 boring unit vertical - with quick-change boring head ----- Drilling motor 1,1 KW, 3,000 rpm Included: 1 boring head BKF 2/3, for corner bearing incl. Drill set, quick-change ----- On loose item, drill assembly to customer fitting 1 boring head BKF 3, for olive incl. Drill set, quick-change ----- On loose item, drill 1 cubo d = 25, 2 x dowel d = 10 1 milling unit vertical for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 piece length stop right and left, usable length 2.7 m, NC controlled Control: electro-pneumatic with three-axis NC positioning controller and integrated machine function Input via TFT display, 10 "color Machine complete, CE-compliant, with 1 set of drilling tools, DÜBO each 1 x d = 6,8,10,12 + 2 roughing cutters d = 16, ready for connection Loading dimensions: Machine L x W x H = 2.50 x 1.50 x 2.30 m, weight 850 kg Length stop L x W x H = 6.00 x 0.30 x 0.30 m, weight 100 kg ----- Total price in above mentioned version, ex works: on request Plus freight and installation / instruction (Technical information according to the manufacturer - without guarantee!)

Condition: ready for operation (used), Okuma DC power supply for 6 axes, PCB with part number E4809-436-002-A, used, shows normal signs of wear, 100% functional. Iedpfx Aei Ecakehyobc

Condition: as good as new (ex-display), Clean air filter Type: Power Unit 250 P FU Offer type: Demonstration machine Technical data: Motor power: 7.5 kW / 3-phase / 400 V / 50 Hz Iodpfjhfmpxjx Ahyebc Intake nozzle diameter: 250 mm Nominal volume flow: 3,534 m3/h Maximum volume flow: 4,900 m3/h Negative pressure at Vnenn: 3,184 Pa Filter area: 22.4 m2 Compressed air cleaning including integrated pre-separator including integrated extinguishing system including inverter for speed control including integrated sound insulation shroud (-4 dB(A)) Chip collection volume: 2 x 250 l Sound pressure level: 71 dB(A) including dust baffle Dimensions L x W x H = 3000 x 1058 x 2361 mm Weight 850 kg

Condition: new, With the Brugger Power Split S22, we present a powerful vertical log splitter with an impressive splitting force of 22 tons. This robust machine is ideal for a wide range of applications and offers maximum drive flexibility - whether via the electric motor or the PTO shaft. The splitting process takes place at two speeds, which enables the wood to be processed quickly and efficiently. Special features: - 22T splitting pressure - Combined drive: 5kW electric motor & PTO drive - Weight: 335kg - up to 110cm log length - Log lifter - Two speeds A log lifter is included in the scope of delivery to facilitate the handling of heavy logs. A hydraulic cable winch is available as an option, which offers additional application options and makes work even easier. With a maximum splitting length of 110 cm, the Brugger Power Split S22 offers the flexibility to process even larger pieces of wood with ease. A support table for shorter pieces of wood is also available. Ibedpstrlv Sofx Ahysc The Brugger Power Split S22 is the ideal choice for anyone looking for a reliable and powerful solution for splitting wood - whether for professional or private use. Prices: Power Split S22 = 2.670€ Power Split S30 (30 tons) = 2.960€ Support table for short logs = 125€ 4 compartment splitting wedge = 99€ Hydraulic cable winch = 595€ Contact us for your customized offer!

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs. Iedpfx Aertrykjhyebc

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Iedpfxoruakgs Ahyjbc Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: ready for operation (used), Year of construction: 2007, Mobile oil warm air generator / heater / heater 120 kW - Used device from rental fleet - built in 2007 - for construction heating / building sites / stables / tents / trade fairs / workshops / etc. Offer description: TB 110, mobile oil warm air generator with separate exhaust gas duct, mounted oil burner RG 2, heating oil pre-filter with quick venting and single-line system, radial fan and plug-in thermostat preparation. Nominal heat load: 120 kW Air output: 6500 m³/h Connection: 230 V/50 Hz Isdovnux Ejpfx Ahyobc Motor output: 1.1 kW Weight: 235 kg Dimensions LxWxH: 200 x 90 x 115 mm Accessories such as room thermostat, warm air hoses, tanks and tank heaters, as well as exhaust pipes and rain caps are not included in this offer, but can be offered on request. Note: The buyer can have the item picked up by a shipping company. If you do not have contact with shipping companies, we will be happy to help you with addresses or inquire for you.

Condition: used, Barrenschütz, DC contactor, contactor, DC switch, power contactor, power switch, high-voltage switch ABB Type NORR63-03 CC-SP Ibjdpfxsfipfuj Ahyjc FPL7146886R6000 CTC2014028R0001 Contactor Type: Normally open main contacts Design: Open, mounted on a bar Actuator: AC + laminated magnetic circuit + rectifier + shunt resistor Actuator rated voltage: 220-230 V / 50-60 Hz Main contact rated current: 63 A Main contact rated voltage: 1500 VDC Number of main contacts, normally closed: 0 Number of main contacts, normally open: 3 Number of auxiliary contacts: 1 normally open + 1 normally closed + 1 changeover Auxiliary contact rated current: 6 A - Main contacts with deion chambers for rapid arc quenching Dimensions W x H x D: 410 x 250 x 195 mm Weight: approx. 9 kg Used, but in very good condition.

Year of construction: 2008, condition: good (used), Industrial stainless stell humidifier , steam generator Outdoor unit 4x8 kw heating wire 32kW Isdpfefl Iquex Ahysbc 160 ° C max

Condition: new, Year of construction: 2026, Genie GS1932 E-Drive scissor lift, standardly equipped with AGM batteries etc., new, used, and demonstration machines available Isdporhknvsfx Ahyjbc

Condition: defective spare-parts repository (used), SIMODRIVE 611 Feed-in module, 10/25kW unregulated; Isdpfx Aornkidshyjbc Mains contactor with NC contact int./ext. heat dissipation possibly defective, we could not check it

Condition: like new (used), Power module, 1-axis, 8 A, Internal heat dissipation Rated motor currents: 1FT5 = 4 A, 1FT6 = 3 A Ibodpsrnkkiefx Ahysc Asynchronous = 3A Was stored as a spare part

Condition: new, SIMODRIVE 611 Iedpfornkkmsx Ahyebc Feed-in module, 10/25kW unregulated; Mains contactor with NC contact int./ext. heat dissipation Package unopened

Condition: good (used), Krauss-Maffei SPA 12/25 RP Manufacturer: Krauss-Maffei Type: SPA 12/25 RP Type: Hydraulic unit Complete factory closure; large selection of storage platforms, pallet racking, shelving units, and paternoster lifts. High-quality industrial machinery, lathes, grinding machines, and hand tools. Iedpfxohvml Dj Ahyjbc You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, This listing is for a Powervar ABCE422-22 UPS Uninteruptable power supply Iedpfx Ahexzg Rieyebc

Year of construction: 2022, condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Westtech Woodcracker CS610 compact / incl. Power-Tiltator / incl. Liebherr Likufix SW48 adapter plate / Year of manufacture: 2022 / DEMO unit / immediately available / excellent condition! Price: €42,690.00 net / €50,801.10 gross - Cutting diameter: 610 mm - Grapple opening width: 1,280 mm - Own weight (basic to fully equipped): 830 – 1,060 kg - Recommended hydraulic flow rate: 65 – 110 l/min - Recommended auxiliary flow rate: 40 – 60 l/min - Recommended operating pressure: 230 – 280 bar - Carrier machine service weight: 15 – 20 t - Saw box: active suspension - Saw chain lubrication: grease Equipment: - incl. Power-Tiltator - incl. Liebherr Likufix SW48 adapter plate Optional: Electrical connector for Liebherr Likufix SW48 with installation = €1,400.00 net We stock many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55, etc.) and they are immediately available. Our warehouse has a large selection of various Westtech products immediately available! Mr. Herden (phone) will be happy to assist you. Upon request, we are also happy to provide a financing offer. We are an official sales and service partner for the following brands: - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - Magni Telehandlers Iedpfx Aheyix I Rjyobc - JCB Construction Machinery - Mercedes-Benz - Iveco In addition, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker product range! Errors and prior sale excepted! Internal no.: 422060 = Further information = New: No Unladen weight: 1,060 kg Part suitable for: Forestry applications Contact Marius Herden for further information.

Condition: good (used), Schulz roller conveyor with 90° roller track curve drive Manufacturer: Schulz Type: Roller curve conveyor Angle: 90° Roller width: 490 mm Nominal/outer width: 530 mm Inner radius: 1100 mm Number of rollers: 22 tapered rollers Roller diameter, tapered: approx. 55 ... 80 mm roller track curve Drive: SEW geared motor Conveying speed: 0.33 m/s 2 supports, height-adjustable transfer systems, roller track conveyor Overall dimensions: approx. 1870 x 530 x 800 mm (L x W x H) More items in other sizes – new and used – can be found in our shop! International shipping costs available upon request! Ijdpfx Ajtzbv Tshyobc

Condition: used, Power Chuck, SMW Power Chuck Type HFK S 160-45 Serial No. 085009 Outer diameter: 165 mm Inner diameter: 45 mm Threaded connection for clamping drive: M52 x 1.5 mm Isdpfx Ahsxcbnfsyjbc Cylindrical centering ring mount: Ø 140 mm Mounting holes: 3x Ø11 mm Bolt circle: 105 mm Max. speed: 7200 rpm Max. clamping force: 3000 daN Jaw seating: 1/16" x 90° serration Total jaw width, serration with keyway: 35 mm Keyway width in serration: 17 mm - Jaw seating with precision ground serration - 3 pcs. soft top jaws - 6 pcs. T-nuts with mounting screws Chuck weight: 13 kg Good condition

Condition: good (used), Year of construction: 2009, functionality: fully functional, The machine is fully operational and equipped with an MB CAS AM52 delivery table (short). In continuous use. Ibjdpfjxcwb Uex Ahyoc

Condition: used, This listing is for One Agilent Keysight E36103ADC Power Supply (More Available) These unit is are all in full working condition and is ready for immediate use Overview: Keysight E36103 Model: E36103 DC Power Supply Output: 20 V, 2 A, 40 W Successor to the older E36103A, which is now obsolete Key Features: High programming accuracy: Voltage: ±(0.05% + 7 mV) Current: ±(0.05% + 1 mA) Ripple & noise: Voltage: 0.8 mV rms, 15 mV peak-to-peak Current: ~1 mA rms Keysight Technologies Readback accuracy: Voltage: ±(0.05% + 5 mV) Ibodpfx Aoxhfckehyec Current: ±(0.05% + 1 mA) Keysight Technologies Compact form factor: 2U ¼‑rack width, compact bench size with 3.7 kg weight Farnell UK Display & controls: High-contrast OLED screen visible from various angles Intuitive rotary knob and front-panel interface for quick digit‑by‑digit adjustments Connectivity: USB and LAN (LXI Core) Supports BenchVue for intuitive control, data logging, and automation Protection features: Overvoltage, overcurrent, and overtemperature safeguards included

Condition: used, This listing is for the Lascar PSU 130 CMD23 Benchtop Power Supply The unit is in full working condition and is ready for immediate use The Lascar PSU 130 is a compact, single-output benchtop power supply module. It provides an adjustable DC output ranging from 1.5 V to 30 V, with a maximum current of 1 A—ideal for electronics labs or testing environments Specifications include: Ibodpfjxhffxox Ahyjc Wide input voltage range: ~100–240 VAC, 47–63 Hz Built-in over‑voltage, over‑current, and short‑circuit protection, plus excellent regulation with low output ripple Front panel includes a back‑lit digital display for voltage and current, a rotary adjustment knob, and 4 mm output terminals

Condition: new, The devices from the AL-KO POWER VAC series are used wherever high suction power and a large air volume flow are required. Typical applications include chip extraction from saws in window manufacturing or direct extraction of milling chips on multi-head welding machines. Functionality: A negative pressure of up to 10,000 Pa enables quick and safe extraction of chips and dust directly at the source. This ensures smooth production processes and consistently high product quality. The looped filters provide a high separation efficiency for both coarse particles and fine dust. It is also possible to connect a ductwork system to link multiple processing machines to the extraction unit. AL-KO POWER VAC devices are equipped with the proven AL-KO OPTI JET filter cleaning system and come standard with a control system featuring an integrated frequency inverter. This allows extraction performance to be adjusted at any time to meet operational requirements. Applications: Ibedpfx Ahswwt E Ueyjc - Cleaning suction of floors, machinery, and workstations in industrial and craft settings - Extraction from hand-held processing machines during grinding, milling, sawing, and deburring - Collecting dry dust up to dust class ST1, direct extraction from small processing and work machines Advantages: - High suction performance up to 10,000 Pa negative pressure - Optimal filter cleaning with jet pulse cleaning (AL-KO OPTI-JET®) - CLEAN dust barrier for improved cleanliness and health protection - Compact, modular design for minimal space requirements - Energy savings with standard frequency inverter for precise adjustment of extraction performance - Low operating noise – integrated silencer and sound-absorbing elements enable installation directly in the work area

Condition: new, pressure 40.0 t chamfer lenght 1270 mm distance between columns 1050 mm column arm 350 mm dayligth 387 mm work stroke 170 mm table height 850 mm back stop - adjustable 800 mm adjustment speed 230 mm/min ajustment speed 140 mm/sec working feed 10.0 mm/sec return speed 170 mm/sec total power requirement 5.5 kW weight of the machine ca. 3220 kg dimensions of the machine ca. 2150 x 1650 x 2300 mm ----- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Iedow U U Rlepfx Ahysbc Furnishing: - DELEM CNC control model DA 58T (TouchScreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp - Additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm holder - BOSCH / HOERBIGER hydr. Components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "sliding system", with T-slot and tilting cam - 1x double foot control - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes