Roller curve conveyor with drive

Schulz

Year of construction: 2013, condition: used, Complete production and filling plant for a pub brewery, consisting of the following components: 1. Milling plant Milling mill with malt feed hopper and pipe chain conveyor system for malt grist. 2. Brewhouse 2-unit brewhouse (Kaspar Schulz, built in 2013) as a brewing block with copper-clad stainless steel vessels. The wort is cooled by a separate plate heat exchanger (API Heat Transfer, built in 2013) with downstream wort aeration. There is also a hot water tank (Kaspar Schulz, 2013) with insulation and heating jacket. 3. Fermentation and storage cellar 4 cylindroconical fermentation and storage tanks (Kaspar Schulz, built in 2013) with a gross volume of 12 hl each and a maximum overpressure of 3 bar. 3 cylindroconical fermentation and storage tanks (Kaspar Schulz, 2013) with a gross volume of 25 hl each and a maximum overpressure of 3 bar. The temperature of these 7 cylindroconical fermentation and storage tanks is controlled by a common control cabinet. In addition, there are 2 further cylindroconical fermentation and storage tanks (Kaspar Schulz, built in 2013) with a gross volume of 14.7 hl each and a maximum pressure of 3 bar. The temperature of these two cylindroconical fermentation and storage tanks is controlled by another control cabinet. 4. Pressure tank cellar / serving cellar 5 upright pressure tanks (Kaspar Schulz, 2013) with clamp heads, each with a gross capacity of 10.5 hl and a maximum pressure of 3 bar. 5. Filling room Siphon filler/glass bottle filler (JS Maschinen) with 6 filling heads. Keg interior and exterior washer (Scheuer) with spray nozzles in stainless steel housing and lye tank in the base. Keg filling station with taps for direct filling of kegs from the pressure tanks. 6. Operating/supply technology Refrigeration system (Hafner-Muschler, 2013) as an ice water storage system with R404a refrigerant and 3 refrigeration compressors. Oil-free compressed air piston compressor (Kaeser, 2013) with a maximum operating pressure of 10 bar and compressed air refrigeration dryer (Kaeser, 2013). Air separator (AST) as nitrogen generator with adjacent nitrogen pressure tank. Additional title: complete brewing plant with copper-clad brewhouse Cast wort capacity: 10 hl Djdpfx Aisy Nm I Howskl Features: grain mill, malt transport system, 2-unit brewhouse made of stainless steel (copper clad), wort cooling, hot water tank, 9 fermentation tanks (4 x 12 hl, 3 x 25 hl, 2 x 14.7 hl), pressure tanks (5 x 10.5 hl), siphon filler, keg washing system, keg filling station, compressed air system, refrigeration system, N2 generator,

Year of construction: 2001, condition: good (used), Heavy duty roller conveyor 2 pcs. driven overall height: 600 mm width: 1400 mm length 7000 mm All dimensions are approximate Dsdpfxjh Icrne Aiwskl Plant is immediately available, already dismantled

Condition: used, Cold area with an annual capacity of 1,000 to 3,000 hl, consisting of 1 fermentation vat: Kaspar Schulz, 13.43 hl, year of construction: 2000 2 fermentation tanks: 1 x Kaspar Schulz, 24.22 hl, year of construction: 2000 1 x Kaspar Schulz, 42.19 hl, year of construction: 2000 4 storage tanks: 4 x Kaspar Schulz, 21.5 hl, year of construction: 2000 6 bright beer tanks: 6 x Kaspar Schulz, 11.22 hl, 3 bar, year of construction: 2000/2001 2 centrifugal pumps: 1 x Hilge, mobile, 15 m3/h, 2.7 bar, year of construction: 2000 1 x Hilge, mobile, 15 m3/h, 2.5 bar, year of construction: 2013 1 desi tank, 1 x cylindrical stainless steel tank on feet with side outlet, year of construction: 2000 with pipework and switch cabinet for automatic cooling system. Additional title: with centrifugal pumps and disinfection tub Dkjdpfx Aijw Td Dlowel Features: Fermentation vat, 2 x fermentation tank, 4 x storage tank, 6 x pressure tank, 2 x centrifugal pump, 1 x desi tank, pipework and control cabinet for refrigeration control

Year of construction: 2001, condition: used, Stainless steel pressure tank for approx. 10 hl net capacity; cooled by means of double jacket on the frame and firmly welded insulated. Individual sale conceivable. Additional title: year of construction 2000/2001 Gross content: 1122 l Perm. working overpressure: 3 bar Perm. working temperature: 20 °C Content cooling zone: 5 l Dkedpfx Aew Td Epsiwsl Length: 1000 mm Width: 1000 mm Height: 1700 mm Material: stainless steel Features: Manhole in the frame, spraying head with spraying head line and shut-off flap DN 25, safety valve and manometer, outlet flap, thermometer Height-adjustable tube feet

Condition: good (used), Features: * Used roller conveyor * Condition: good ( used ) * Feet to order separately * Condition: fully functional with traces of use * Ideal for fast material transport * Professionally disassembled and packed * 24V technology * Incl. sensors and light barriers ( pre-assembled) Technical data: Dimensions of the roller conveyor Manufacturer: Interroll Type: Zero pressure accumulation Drive: 24V technology Total width approx.: 740 mm Conveyor width: 655 mm Roller pitch: 75 mm The system consists of 5 segments: 2 x 2,250 mm each 3 drive rollers 2 x 540 mm each 1 drive roller 1x 2775 mm 5 drive rollers each Details of the frame height: 150 mm width: 40 mm Dsdsff Hgtopfx Aiwskl Max. Weight of the conveyed material 50Kg Roller conveyor The roller conveyor is ideal for interlocking machines or workstations in the picking zone and for optimizing internal processes. During transport, the roller conveyor can convey sensitive and differently sized containers, boxes or other packaging and item units to the loading or delivery point and also serves, for example, as a connecting line in front of or between production and processing machines. It also enables efficient parts transport in the plant and warehouse and is used to convey considerable volumes and distances. Customized solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods, we are your competent partner! We would be pleased to prepare your individual offer or to advise you on conception or assembly questions. Just let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of specialists. For companies in a wide range of industries, such as: Logistics, pharmaceutical industry, trade or the electronics industry, we have already successfully realized projects. Together we will work out ways to optimize your process and material flow in a cost-effective and sustainable way. We can even offer you fully automatic sorting technology or supplementary components such as picking racks or containers.

Year of construction: 1991, condition: used, Fermentation tank with two dished bottoms. - 4 tanks with 52 hl butto content each - 2 tanks with 79 hl gross capacity each Additional title: vertical stainless steel tanks Total volume: 79 hl storage tank 2 pcs. Operating pressure: 0 bar Operating temperature: 20 °C Width: approx. 1400 mm Dodsvcqzxjpfx Aiwskl Height: approx. 4100 mm Material: Stainless steel 1.4310 Position: vertical Base construction: 4 x pipe feet, height-adjustable Features: Side manway; CIP piping; outlet valve (butterfly valve)

Condition: used, Year of construction: 2002, CIP tanks for water, caustic, acid and disinfectant. Additional title: 4 vertical vessels Dedpfx Aexbpibsiwskl Volume: 1270 l Caustic tank, acid tank, disinfectant tank Material: Stainless steel Features: Water tank, 870 l; Caustic tank, 1270 l; Acid tank, 1270 l; Disinfectant, 1270 l

Condition: used, functionality: fully functional, Year of construction: 2009, Span: 35 m Load capacity: 130 tons Including 2 x 75 m rail A75 Drawings on request / drawing on request No hoist unit / no hoist Can be adapted to an overhead/gantry crane Dedot D H H Aspfx Aiwekl

Condition: used, Year of construction: 1993, Storage tank with 2 torospherical heads. Fitted with bottom and side-wall cooling jackets. 2 tanks, each 83 hl total volume, with 2 x cooling jackets Additional title: 2 vertical tanks Total volume: 83 hl Operating pressure: 0,9 bar Operating temperature: 20 °C Width: approx. 1800 mm Height: approx. 4030 mm Dkjdpfx Aisxbqh Eswol Material: Stainless steel 1.4301 Position: vertical Base construction: 4 x pipe feet Features: bottom cooling jacket; side-wall cooling jacket; sampling valve; 2 x sight glass; side manway; CIP piping; outlet valve (butterfly valve); Contact thermometer; solenoid valve for glycol piping

Condition: used, Fermentation cellar with tanks, equipped with 2 dished heads. - 2 tanks with 83 hl gross content each, with 2 x cooling zones - 4 tanks with 52 hl gross content each - 2 tanks with 79 hl gross capacity each. Additional title: Years of manufacture 1991 - 1993 Dedpjxbn Rkjfx Aiwekl Features: 2 Tanks, each 79 hl; 4Tanks, each 52 hl; 2 Tanks, each 83 hl

Condition: new, Year of construction: 2024, Permanent overbelt magnetic separator TYPE DMPM1000 1.600 x 900 x 220mm ===== Solid steel construction, welded Construction welded & painted RAL 7016 (anthracite gray) Magnetabmessungen: 1.000x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm crowned, shaft fixed with tension bearings. Drive: GEMOTEG shaft-mounted geared motor 1.1KW, speed 0.4-0.6m/sec Connection 400V, 50Hz Protection class IP54 Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5.4mm thick Conveyor belt width: 650mm 8 pcs. TG-40 cleats high-frequency welded Belt material: 3-ply especially transversely stable * equipped with stainless alligator connectors RS125 Magnetic properties: Built-in magnetic core: Strontium ferrite Y30 Bonded SfRe strontium hard ferrite magnetic core encased in soft iron, so that a very high permeability can be guaranteed. Housing with 1.4301 stainless steel plate and pole pieces tightly closed and sealed. conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator Our core competence lies in supplying customers with exactly what they really need. We work together with our customers to develop customized, individual solutions and supply corresponding systems from our own production. Dkjdpfxstxn Ewj Aiwjl Please feel free to contact us by telephone to find a suitable solution for your application.

Condition: used, Schulz roller conveyor 90°-580-530 IR795 RA1244 Technical data: Manufacturer: Schulz Angle: 90° Useful width (NUB): 530 mm Nominal/outside width (NB): 580 mm Inner radius (IR): 795 mm Drive: centered Conveyor speed: v = 0.30 m/s Rollers: Type: G6/50 plain bearing with conical plastic molded part Transport weight: 85 kg Scope of delivery: without supports and side guides (please enquire if required) optional Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Dkjdpjk Aa N Rsfx Aiwjl Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, RA1188 Schulz roller curve 90° roller curve conveyor 450-390 IR1220 Manufacturer: Schulz Angle: 90° Useful width: 390 mm Nominal/outer width: 450 mm Inner radius: 1220 mm Conveying speed: v = 0.35 m/s incl. lateral guides on both sides Roll: Type: G6/50 plain bearing with conical plastic moulding Transport mask: L x W x H = 1600 x 550 x 600 Transport weight: 100 kg Dkedpfxou Rv U Rs Aiwsl Scope of delivery: without supports (if required, please inquire) Optional: Supports 70,00€ per piece Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Year of construction: 2023, condition: new, Attachment suited for: Hoisting equipment Selling price: € 15.500, US$ 16.480 Dkodpoph Rk Tjfx Aiwjl A scrap magnet for excavator is an electromagnet that is specially designed with very deep magnetic field for sorting out and transporting metal scraps in a junkyard. There is no need to install any extra generator and hydraulic installation on the machine. So you can get rid of the extra hoses and can move the excavator easily Explore the GALEN's new magnet system for detailed information please contact us

Condition: used, Schulz roller curve 90° roller curve conveyor 450-390 IR800 RA1185 Make: Schulz Angle: 90° Useful width: 390 mm Nominal/outer width: 450 mm Inner radius: 800 mm Conveyor speed: v = 0.35 m/s incl. lateral guides on both sides Dksdpfx Aijk Aa H Iswsl Roll type: G6/50 plain bearing with conical plastic moulding Transport dimensions: L x W x H = 1600 x 550 x 600 Transport weight: 100 kg Scope of delivery: without supports (if required, please inquire) Optional: Supports Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik