Used Trumpf Trulaser Cell 8030 L60 for sale (1,597)

Condition: good (used), Year of construction: 2017, operating hours: 48,888 h, functionality: fully functional, X Working area max.: 2000 mm (without repositioning) Y Working area max.: 1250 mm Operating hours: 48,888 hours Control system: Bosch PNC-P Machine - C-frame - Coordinate guidance - Linear magazine with 15 positions for clamping claws and tools - Hydraulic clamping claws (2 pieces) - Drives with maintenance-free three-phase motors Nodpjza E Huefx Alnjcu - Repositioning device with programmable pressure plate - 1st stop pin (right inside) - Dividing slide Punching head - Electro-hydraulic punching head - Rotatable mono-tool holder - Programmable pressure plate position - Tool length compensation - Spray lubrication for the punch - Punch slug extraction - Forming function Control system - TRUMPF control system based on Rexroth IndraMotion MTX - Operating panel with 15" TFT color screen - Integrated technology data - Teleservice interface via the internet - Automatic shutdown - Program management - Production plan Data transfer - USB interface - RJ45 network connection Safety - CE marking - Multi-beam light curtains - Rapid shutdown of drives Extended standard equipment - Ball tables - Chip container - Initial oil filling - Additional clamping claw - Foot switch for start - Bulge detection - Vibration-damped installation - 5 RTC cassettes with die holders

Condition: good (used), functionality: fully functional, Year of construction: 2002, controller model: Siemens Sinumerik 840D, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Working area 3050 x 1550 mm - Hi-Las high-pressure cutting - Laser cutting head with 5'' lens - Quick-change device for cutting head - Programmable cutting gas selection/pressure adjustment - Capacitive height control APC - Function: ContourLas - Slag cone detection - Compact dust extractor - Tank heater - Automatic tool changer with 19 stations (21 – clamping jaws) - 2 clamping jaws - Rotation of all tools - NC-controlled digital, maintenance-free three-phase drives - Automatic re-positioning - Tool length compensation - Rapid shutdown of the hydraulics - Automatic shutdown - Automatic indexing tables, each 500 x 500 mm - Sensors for both indexing tables - Punch slug extraction - Forming capability - Programmable punch tool lubrication - Programmable pressure foot - Adaptive stroke length control - Safety devices - RJ 45 network connection - 3.5'' floppy disk drive + Laser TLF 3200 + SortMaster Box incl. 4 containers + GripMaster, adjustable + Scissor lift table + Re-positioning cylinder + Rotoscanner Ncjdpeza Eyhsfx Alnju + HZB SheetMaster + SortMaster Pallet + SheetMaster incl. C-frame + Modular suction plate + additional clamping jaws, total of 4 + Chip conveyor with tilting container + Bulging detection

Condition: good (used), functionality: fully functional, Year of construction: 2009, controller model: Siemens Sinumerik 840D, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Working area 3050 x 1550 mm Nedpfxsza Eu Eo Alnocu - Hi-Las high-pressure cutting - Cutting head quick-change system - Programmable cutting gas selection/pressure adjustment - Capacitive height control APC - Function: ContourLas - Slag cone detection - Compact dust extraction system - Tank heating - Automatic tool changer with 19 stations (21 – clamping jaws) - 2 clamping jaws - Rotation of all tools - NC-controlled, digitally operated, maintenance-free three-phase drives - Automatic repositioning - Tool length compensation - Rapid shutdown of the hydraulics - Automatic shutdown - Automatic indexing slides, each 500 x 500 mm - Sensors for both indexing slides - Slug extraction - Forming capability - Programmable stamping tool lubrication - Programmable clamping device - Adaptive stroke length control - Safety devices - RJ 45 network connection - 3.5'' floppy disk drive + 5'' cutting head + 9" cutting head + FocusLine + MultiTool function + Thread forming function + Signing/quick beading function + Deburring and rolling technology function + Softpunch function + Additional clamping jaw + Repositioning cylinder + Vibration-damped installation + Blow-out device for small parts + Chip conveyor with tilting container

Condition: good (used), Year of construction: 2008, functionality: fully functional, X working area max.: 3000 mm Y working area max.: 1500 mm Control system: Sinumerik 840D Standard equipment: - Sturdy C-frame Ncsdpjza Elqefx Alnsu - Coordinate guidance with integrated linear magazine, 25 positions for tools and clamping jaws - 4 clamping jaws - Automatic part slide 500 x 500 mm - Drives: Maintenance-free three-phase servo motors Punch head: - Hydraulic mono-tool holder - 360-degree rotation for all tools - Automatic tool length compensation - Tool spray lubrication - 2nd lubricant tank - Programmable wiper movement - Punch slug extraction - Programmable clamping device for re-clamping with pre-selectable clamping force - Bulge detection Control system: - 10.4-inch TFT display - Simple operation - Diagnostic function - Integrated 3.5-inch floppy disk drive - RJ45 network connection Safety: - CE marking - Multi-beam light barriers - Rapid shut-off of hydraulics + Multitool function + MultiBend function + Thread forming function + Marking/fast beading function + Deburring and rolling technology + Individually opening clamping jaw + Re-clamping cylinder + Sensor for part slide + Vibration-damped installation + Automatic shut-off + Chip conveyor + MDE interface + ToolMaster 70

Condition: good (used), Year of construction: 2010, functionality: fully functional, operating hours: 35,295 h, bending force (max.): 230 t, number of axes: 5, Equipment: CE marking, documentation/manual, safety light barrier, Bending length [mm] 3230 Press force [tons] 230 Control system TRUMPF TASC 6000 Operating hours [h] 35295 Hydraulic operation [h] 24098 Standard equipment: Machine - Robust machine frame as a welded construction in all-steel design - Press beam with high bending strength - Spherical bearing of the press beam with press beam inclination - Proportional valve technology and switchable double pump - Modern block hydraulics with control valves mounted on the cylinder - Electronic pressure gauge - Measuring system with centrally mounted glass scales and temperature compensation - Oil cooler - Control cabinet cooling - Modern machine design Back gauge system - Rear back gauge system with 2 axes and rack and pinion drive for the X and R axes - 2 back gauge fingers with secure adjustment from the front Tool clamping - Upper tool clamping system "New Standard Clamping" manual, hardened, self-centering; for vertical tool change - Lower tool clamping with hydraulic clamping, hardened Lower tool displacement - Lower tool displacement programmable (pneumatic, 2 positions) Control - Machine control: TRUMPF TASC 6000 graphical workshop programming - Windows XPe, Pentium 4 with 2.8 GHz clock speed - 2 GB RAM - 15" touch screen - Network enabled - Teleservice via analog telephone connection Operation - Control panel with LCD keypad, foot switch for up, down and emergency stop - Communication bus for the use of ACB angle sensor tools Safety - Safety device: integrated side doors + Rear back gauge system 5 axes (X, X1, R, Z1, Z2) + Upper tool clamping hydraulic + Crown control CNC Ncjdoza Eiiepfx Alneu + BendGuard + Additional foot switch + 2 pcs. support console + 1 pcs. MobileControl + ACB prepared

Condition: good (used), Year of construction: 2011, functionality: fully functional, pressing force: 36 t, Bending length [mm] 1020.00 Pressing force [tons] 36 Control system TRUMPF TASC 6000 Standard equipment Machine - Robust machine frame - Press beam - Highly dynamic, electromechanical direct drive (torque motor) - Inductive length measuring system with temperature compensation - Control cabinet air conditioning - Ergonomic machine design Back gauge system - Rear back gauge system, 3 axes X1, R1, Z1 axis Tool clamping - Upper tool holder, self-centering, manual clamping - Lower tool holder, manual clamping, hardened Control system - TRUMPF TASC 6000 integrated - Numerical workshop programming - Windows XPe (embedded), Pentium M with 1.1 GHz clock speed - 1 GB RAM Nsdoza Dczspfx Alnscu - 15-inch touch screen Safety - Side-swinging protective doors - Rear protective cover - 2-button foot switch, for standing and seated operation - Rear back gauge system, 6 axes Ergonomics package: - Comfort support table (front) - Comfort footrest - Work area lighting in front (LED) - 2 document holders Productivity Plus package: - Graphical workshop programming - Automatic tool clamping - BendGuard (with block laser)

Condition: good (used), functionality: fully functional, Year of construction: 2011, controller model: Rexroth IndraMotion MTX, laser type: CO₂ laser, laser power: 4,000 W, punching force: 22 t, Equipment: CE marking, nozzle changer, safety light barrier, Standard Equipment: Machine - Work area 3050 x 1550 mm - Robust, easily accessible C-frame - Coordinate guidance for highly precise machining - Linear magazine with 21 tool positions and 4 clamping claws - Drives with maintenance-free three-phase motors - Repositioning device with programmable clamping system - Foot pedal for closing clamping claws - Ball tables - Two parts collection containers - Chip container - Initial oil fill - Transport and assembly device - ContourLine - FocusLine - NitroLine - FastLine - FlyLine - PlasmaLine Ncedpeza A Hljfx Alnou - Additional Xp and Yp axes - Ejection cylinder for laser parts - Quick flap for laser parts 500 x 500 mm including sensor for part chute - Liftable laser cutting support - Slug detection TRUMPF Laser - Laser TruFlow 2700 with LensLine and optimized standby mode - High-frequency excitation - Cooling unit - Laser control system TASC - Enclosed beam guidance - Beam pipe ventilation with compressed air Cutting Head - Lens cutting head with 170 mm focal length - Universal cutting head quick-change device UTI with bus connection - ControlLine Programming - Extended workshop programming (TruTops via network access) Punching Station - Electro-hydraulic punching head - Rotating mono-tool holder - Tool length compensation - Programmable clamping system with manually adjustable clamping force - Stroke counter for punch - Spray lubrication for punch - Punch slug extraction - Deflection detection - Flap for punching parts 500 x 500 mm including sensor for part chute - Reaching the fill level in the punching console - Level monitoring for thread forming and tool lubrication Control System - TRUMPF control system based on Rexroth IndraMotion MTX - External control panel with 15" TFT touchscreen - Hard drive with 160 GB storage capacity - Integrated technology data - Teleservice via internet - Integrated e-shop - Programmable cutting gas pressure - Automatic shutdown - Production plan Data Transfer - Network connection RJ45 and USB interface Safety - CE marking - Dual light curtains - Monitoring system for gas pressure, temperature, coolant, among others - Quick stop - Protection against scattered radiation - Compact dust extraction system - TruFlow 4000 including LensLine - Automatic nozzle changer - MultiTool function - MultiShear function - MultiBend function - Thread forming function - Deburring and rolling technology - Active die - StripLine - Adaptive stroke calibration - Spray lubrication for die - 4 individually opening clamping claws - Repositioning cylinder - Vibration-damped mounting - Chip conveyor with tipping container - Brush tables with loading and unloading assistance - Blowing device for small parts Automation: SheetMaster - Suction frame 3000 x 1500 mm with 36 suction cups (y-axis = 400 mm) - Adjustable suction rails (v-axis = 120 mm) - Peeling suction - Vacuum sensor for each suction cup - Sheet thickness sensor for double sheet detection - Automatic clamping claw closing on machine - Central lubrication - Main-time parallel loading and unloading of SheetMaster - Unloading monitoring GripMaster special arrangement 4m: - Scrap grid tongs with sensor - Scissor lift table 400 mm

Condition: ready for operation (used), Year of construction: 2008, laser power: 50 W, This 3-axis TRUMPF Trumark Station 5000 was manufactured in 2008. It features maximum workpiece dimensions of 680 mm x 500 mm x 700 mm and a traverse path of 500 mm on the Z-axis. The machine has a maximum workpiece weight of 50 kg without the X/Y axis. If you are looking to get high-quality laser marking capabilities, consider the TRUMPF Trumark Station 5000 machine we have for sale. Contact us for further details. - Maximum Workpiece Dimensions (W x H x D): 680 mm x 500 mm x 700 mm- Maximum Workpiece Weight: 50 kg (without X/Y axis), 25 kg (with X/Y axis)- Traverse Path Z-Axis: 500 mm- Traverse Path X-Axis: 300 mm- Traverse Path Y-Axis: 300 mm- Traverse Speed Z-Axis: 1.5 m/min- Traverse Speed X-Axis: 6 m/min- Traverse Speed Y-Axis: 6 m/min- Electrical Connection (Voltage): 115 V / 230 V- Electrical Connection (Frequency): 50 Hz / 60 Hz- Maximum Power Consumption: < 2.55 kW- Workstation Dimensions (W x H x D): 860 mm x 2000 mm x 1310 mm- Workstation Weight (without laser): 410 kg- Laser Class: Class 1- Laser Compatibility: Combined with VMc 1-6 and TruMark 7020 marking lasers Njdpfx Alsza Albjnecu

Condition: ready for operation (used), Year of construction: 2017, operating hours: 9,000 h, travel distance X-axis: 300 mm, number of axes: 3, Metal 3D printer manufactured in 2017. This TRUMPF TruPrint 3000 features a build volume of Ø 300 mm x 400 mm and is equipped with a 500 W fiber laser. It offers high-speed and high-density build rates, making it suitable for various applications. If you are looking to get high-quality metal printing capabilities, consider the TRUMPF TruPrint 3000 machine we have for sale. Contact us for further details regarding this machine. • Build volume: Ø 300 mm x 400 mm • Laser configuration: 1x 500 W fiber laser • Laser capacity: 500 W • Main supply: 360 – 440 V • Frequency: 50/60 Hz • Control voltage: 24 VDC • Connected load: 15 kVA • Full load current: 32 A • Nitrogen supply (N2): 6 – 10 bar • Argon supply (Ar): 6 – 10 bar • Air pressure: 5 – 10 bar • Laser operating hours: approx. 9,000 h • Last maintenance: 02/2024 • Condition: very good • Build material: AlSi10Mg only • Validated parameter sets: High Speed / High Density • High Speed build rate: 57 cm³/h at 60 µm layer thickness and 99.6% density • High Density build rate: 27 cm³/h at 60 µm layer thickness and 99.9% density • Optional accessories: • 1x build cylinder • 2x powder supply cylinders Ncedpfx Ajzarc Aelnju • Cooler • Pallet truck • Unpacking station • 2x new filters • 11x aluminum build platforms • Vacuum conveyor system • Sieving machine with control unit • Optional accessories year: 2017 • Optional accessories condition: very good Availability: approx. Q3/2026

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 070804, punching force: 16 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,070 mm, travel distance Y-axis: 1,280 mm, punching diameter: 76 mm, TECHNICAL DETAILS Punching force: 165 kN Working area: 2,070 x 1,280 mm Sheet thickness: 6.4 mm Workpiece weight: 150 kg Punch diameter: 76.2 mm X-axis speed: 80 m/min Y-axis speed: 55 m/min Njdpfozapqdex Alnjcu Control system: CC 220 MACHINE DETAILS Machine weight: approx. 8,000 kg

Condition: used, functionality: fully functional, Year of construction: 2004, degree of automation: manual, actuation type: electric, Equipment: cooling unit, Trumpf HL 1003D laser unit Beam quality of 12 mm mrad and a laser power of 1000W at the workpiece. 2 optics with cameras. Nedjwxq H Ejpfx Alnscu

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2022, operating hours: 60 h, +++ Demo machine, approx. 60 operating hours +++ +++ Descending Die +++ Basic machine: TruPunch 3000 large format (S20) Machine: - Box frame - Hybrid axis system - Linear tool magazine with 24 stations for clamps and tools - Hydraulic clamps (3x) - Drives with maintenance-free three-phase motors - Repositioning with programmable presser foot - Foot switch to close clamps - Part chute, right - Part removal flap, left - Sensor for part removal flap - SortMaster Compact retrofit-prepared Punching head: - Delta Drive - Rotating single-station tool adapter - Programmable presser foot position - Tool length compensation - Punch spray lubrication - Punching slug vacuum - Forming function - Punch stroke counter Control: - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19" TFT color display - Touchpoint - Auto-shutdown - Remote support interface - Program manager - Production plan Data transmission: - Central Link - Online Update Manager Safety: - CE marking and EC Machinery Directive - Double-beam safety light barrier Advanced standard configuration: - First index pin (inside right) - Ball tables - Part chute for finished part container - Chip container to rear for removal Advanced machine and punching features: - MultiTool function - MultiShear function - MultiBend function - Tapping function with thread counter - Forming tap breakage control - Lubricant level monitoring - Unlimited time license - Marking/Quick beading function (option) - Engraving function - Deburring and roller technology function - Adaptive stroke calibration - StripLine - Die spray lubrication with fill level monitoring - Descending Die - Integrated flattening function - Smart punch monitoring - Additional clamp - Height-adjustable clamp - Vibration damping - Chip container removed to front - Brush tables with loading and unloading assistance - Warped sheet detection Technical data TruPunch 3000 large format (S20) Dimensions / Weight: Width: 7644 mm Depth: 7666 mm Height: 2200 mm Weight (fully equipped): 13,800 kg Control / Hardware / Electrics: Hard disk type: SSD Number and size of hard disks: 2 x 120 GB Customer program memory: 10 GB Display: Touchscreen Display size: 21.5 in Interfaces: USB Network: RJ45 Control type: Bosch CML75 Operating system: Windows 10 IoT Ncjdpfxoxmfc Us Alnsu Axis data: X/Y/C axis drive: NC-controlled, maintenance-free three-phase servo motors Punching head drive: Electric Max. X axis speed: 90 m/min Max. Y axis speed: 60 m/min Max. simultaneous axis speed: 108 m/min Max. C axis speed (punching): 350 rpm Max. C axis speed (tapping): 350 rpm Max. punching stroke rate (E=1mm): 690 1/min Max. marking stroke rate: 1000 1/min Accuracy — positioning deviation Pa: +/- 0.1 mm Accuracy — position range Ps: +/- 0.03 mm Smallest programmable increment: 0.001 mm Working range / Workpiece size: Max. sheet thickness: 6.4 mm Max. workpiece weight: 230 kg X axis working range: 3000 mm Y axis working range: 1550 mm Punch-specific data: Max. punching force: 180 kN Max. presser foot force: 20 kN Max. tool size, punching (outer diameter): 76.2 mm Max. tool size, forming (outer diameter): 101.6 mm

Condition: good (used), functionality: fully functional, Year of construction: 2000, Max. processing size: 3000 x 1500 mm Infeed width: 3000 mm Cutting capacity for steel: up to 20 mm, stainless steel: 10 mm Overall external dimensions: 9 x 5 x 2 m With Schmalz suction lifter up to 750 kg, year of manufacture 2018 With chain conveyor for waste transport With spare parts Ncodpfx Aozb Uukelnju Disassembly must be carried out by the buyer.

Condition: ready for operation (used), Year of construction: 1995, operating hours: 51,658 h, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, TECHNICAL DETAILS Sheet width: 2,500 mm Sheet length: 1,250 mm Sheet thickness: 8 mm Punching force: 220 kN MACHINE DETAILS Ncsdpfxjy U U Nps Alnju Operating hours: 51,658 h Machine weight: approx. 11,050 kg EQUIPMENT - TRUMPF Sheetmaster

Condition: ready for operation (used), Year of construction: 1998, operating hours: 30,430 h, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, punching diameter: 76 mm, TECHNICAL DETAILS Pressing force: 220 kN Sheet metal thickness - max.: 6.4 mm Punching diameter: 76.2 mm Travel distance X-axis: 2,500 mm Travel distance Y-axis: 1,250 mm Positioning speed X-axis: 90 m/min Positioning speed Y-axis: 60 m/min Positioning speed (simulation): 108 m/min Positioning speed (rotary axis): 360 °/sec Njdpoy U U Edsfx Alnscu Workpiece weight: 150 kg Smallest programmable path dimension: 0.01 mm or 0.01° Tool stations: 15 Tool change time: 1.5 - 6.5 sec MACHINE DETAILS Dimensions: 6,400 x 5,800 x 2,100 mm Machine weight approx.: 11,050 kg Operating hours: 30,430 h

Condition: ready for operation (used), Year of construction: 2014, operating hours: 65,000 h, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, workpiece weight (max.): 200 kg, Machine with SheetMaster TECHNICAL DETAILS Travel range of the X-axis during punching: 3,050 mm Travel range of the Y-axis during punching: 1,550 mm Sheet thickness: max. 8 mm Workpiece weight: max. 200 kg Punching force: max. 220 kN Ncodpfjy U Ut Isx Alneu Stroke rates Punching stroke rate at 1 mm: 1,350 min⁻¹ Marking stroke rate: 3,000 min⁻¹ Part removal Part size, part flap during punching: max. 500 x 500 mm Part size, fixed chute during punching with a moving table: max. 80 x 50 mm MACHINE DETAILS Operating hours: 65,000 h Space requirement: 7,395 x 6,540 x 2,072 mm Power consumption, auto-shutdown active: 0.5 kW Power consumption during production: 9.5 kW

Condition: ready for operation (used), Year of construction: 2008, operating hours: 59,000 h, functionality: fully functional, punching force: 18 t, working width: 1,270 mm, working height: 2,540 mm, punching diameter: 76 mm, sheet thickness (max.): 6 mm, TECHNICAL DETAILS Working area: 2,540 x 1,270 mm Punching force: 18 t Sheet thickness: max. 6.4 mm Workpiece weight: max. 150 kg Punching diameter: max. 76.2 mm Speed: max. 90/60/108 m/min Accuracy: 0.1 mm MACHINE DETAILS Control system: Bosch Type 3 Ncodpfx Alsy U Ub Sjnju Length: 5,500 mm Width: 5,900 mm Height: 2,200 mm Weight: 11,400 kg EQUIPMENT - Sturdy, easily accessible C-frame - Coordinate guidance for highly precise machining - Linear magazine with 19 tool stations - 2 clamping devices - Drives with maintenance-free AC servo motors - Follow-up device with programmable dwell function - Ball tables - Partial slide 180 x 200 mm - 2 finished parts containers - Chip container - Automatic shut-down

Condition: used, functionality: unexamined, Year of construction: 2006, We are offering this used TRUMPF Trumatic L3030 laser cutting machine, manufactured in 2006, for sale. Machine dimensions: approximately 550/300/200 cm, table dimensions: approximately 340/160/85 cm, consisting of: laser TLF 4000T and cooling unit RIEDEL L16/29-TR3.24, manufactured in 2006, including accessories and laser cooling unit L16/29-TR3.24. The machine is currently dismantled and was last in operation at Gast Metallwarenfabrik at the end of 2025. It was disassembled there by a specialist company that also delivers new TRUMPF machines. The machine is sold without any warranty. Nodpfx Aozbyk Rolnecu Loading is possible on site. Transport must be arranged by the buyer. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 57,202 h, pressing force: 173 t, stroke length: 365 mm, total height: 3,100 mm, overall weight: 18,000 kg, controller manufacturer: TRUMPF, number of axes: 8, This 8-axis TRUMPF TrumaBend V170 press brake was manufactured in 2003. It features a pressing force of 1700 kN, a stroke of 365 mm, and a maximum bending length of 4080 mm. The distance between columns is 3680 mm. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V170 machine we have for sale. Contact us for further details regarding this machine. Ncedpfox D Ilysx Alneu Machine Benefits Technical Machine Benefits • Distance between column: 3680 mm • Distance beam - table: 535 mm Extra Information Machine still under power Dimensions Machine Depth 5000 mm Technical Specification Bending Length 4080 mm

Condition: excellent (used), Year of construction: 2000, Technical specifications: Working length: 4080 mm Distance between uprights: 3680 mm Press force: 170 tons CNC control: DELEM DA65 Number of controlled axes: 4 Controlled axes: Y1 / Y2; X; R Number of backstops: 4 Stroke: 365 mm Overhang: 410 mm Installation height: 535 mm Working height: 1050 mm Hydraulic tool clamping, top and bottom: WILA Pneumatic die shifting CNC-controlled crowning DSP laser monitoring (new) CE marking Motor power: 37 kW Dimensions (length x width x height): approx. 5650 x 2350 x 3100 mm Weight: approx. 18.5 tons Condition: Overall in good condition, retrofitted in 2026 The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty. Ncjdpszbugmjfx Alnsu

Condition: excellent (used), Year of construction: 2001, Technical specifications: Working length: 2050 mm Nodpjzbuc Iefx Alnocu Distance between uprights: 1750 mm Press force: 85 tons Control system: DELEM DA65A Adjustable back gauge Axes: Y1/Y2; X; R; Z1/Z2 Stroke: 365 mm Overhang: 410 mm Installation height: 535 mm Power: 11 kW Hydraulic tool clamping, top and bottom: WILA system CNC-controlled crowning I-axis: pneumatic die shifting ACB angle control system CE marking Dimensions (length x width x height): approx. 2200 x 2750 x 2900 mm Weight: approx. 9.5 tons Condition: Very good condition, retrofitted in 2026 The seller is not liable for typographical or data transmission errors. The machine’s appearance, technology, and wear and tear are commensurate with its age; used machines are sold without any warranty.

Condition: used, Technical details: plate thickness: 10 mm material thickness: 4,5 - 10 mm capacity in W: 2000 Watt voltage: 220 mit 4 Meter-Kabel V machine weight approx.: 18 kg dimensions of machine: L: 550 x B: 120 x H: 260 mm WELDING EDGE SHAPER - GRINDING MACHINE or PLATE SHAPER Hand tool Application: cutting and notching of plate-shaped workpieces Material thickness depends on material (max. 10mm) Nodpou Ngfqefx Alnscu Tool = lower knife (die) and upper knife punch) optional with accessories As in the picture, for 200,00 Euro *

Condition: used, Year of construction: 1991, Technical details: Ncjdpfey Alw Hsx Alnsu pressure: 2000 t chamfer lenght: 4100 mm control: - distance between columns: 3200 mm stroke max.: 250 mm total power requirement: 22 kW operating pressure: max. 280 bar table width: 200 mm stroke speed - idle stroke upwards: 100 mm/s stroke speed - idle stroke downwards: 100 mm/s weight of the machine ca.: 18.000 t dimensions of machine: 5,0 x 2,7 x 3,0 m

Condition: used, Year of construction: 2009, Technical details: Beam Hour: unbekannt / unknown h laser capacity: 4000 W The TLF4000 resonator was installed in a Trumpf True Laser 2525: Laser power: 4,000 W (4 kW) Wavelength: 10.6 µm Beam mode: TEM01* Pulse frequency (gating): 100 Hz – 10 kHz Gas consumption (laser): CO2: approx. 1 l/h N2: approx. 6 l/h He: approx. 13 l/h Njdpfx Ajyuvcijlnscu Cutting gas O2: approx. 500 – 2,000 l/h Electrical power consumption: approx. 33 – 67 kW Adjustable laser power: programmable in 1% increments Laser type: CO2 laser with closed gas circuit Translated with (free version) *

Condition: used, Year of construction: 2008, Technical details: Number of filters: 5 St. filter: 576/556 x 74 x 1050 mm total pressure: 200 daPa volume capacity: 1500 m³/h filter surface area: 25 m2 Voltage: 460 V Nedpfx Aloyt I Axsnecu motor capacity: 3,3 kW dimensions L x W x H: 1,05 x 1,28 x 2,0 m Dry separator with fan is sold as is. Built-in sheet steel construction Filter surface VARIO T 1.5 f=50 Hz Filter: 6 filter elements; dust extraction via container Ø 300 x H: 380mm Fan: Intake opening Ø 250 m; connected load 380V Exhaust air opening via ceiling External operation (was integrated in a laser cutting system Trumpf) *