Used Tl Foot Plate 3 Pieces for sale (74,584)

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33901014072, empty load weight: 7,300 kg, maximum load weight: 27,700 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,530 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 3,330 mm, suspension: air, tire size: 385/65 R 22,5", tire condition: 100 %, color: silver, Chassis, semi-trailer, transport company Fine-grained steel, welded lightweight construction, kingpin plate with replaceable 2" kingpin, main frame reinforcement for 25 tons, with center of gravity at 3 m loading length in the retracted state. 13 pairs of hooks for lashing straps, welded onto the cross members. 23 pairs of lashing eyes recessed in the outer frame, each rated at 3.5 tons. 24-ton, 2-speed support winch in reinforced design for loading and unloading, single-sided operation. 1 spare wheel holder for 1 spare wheel. 1 storage compartment for stowage, open, with the option of stowing items behind the front wall or in a compartment between the extended longitudinal beams! 4 pairs of stake pockets recessed in the outer frame for rectangular tubes 80x80 mm. 5 stake pockets recessed in the middle of the floor for rectangular tubes 80x80 mm, with reinforcing beam, installed between the outer stake pockets, except for one. 6 lashing/stake rails recessed across the floor over the entire width to the outer frame (max. usable internal width between the outer stake sockets approx. 2170 mm), approx. 100 mm high. With 20 mm round steel rails, top and bottom, spacing from top to bottom approx. 60 mm (of the round steel). Bottom with an angle plate as a closure, half open downwards. For lashing and inserting stakes 80 x 80 mm. Csdpfxsza Dyye Ai Neha Pull-out ladder at the rear on the right side. 5 x 3 pairs of stake pockets recessed on the outside of the longitudinal beams for rectangular tubes 80x80 mm, including reinforcing beams. 10 "lightweight" stake sockets, B=80/ T=80/, usable height approx. 1850 mm, hot-dip galvanized, with lashing eyes welded on at the bottom on both sides. 2 plastic toolboxes, b=600 / h=425 / t=460 mm, lockable. Telescoping extendable by a maximum of 4,000 mm and lockable approximately every 500 mm. Main frame telescoping Locking with pneumatic bolt locking + display of frame locking on both sides, operated via hand knob, operation for brake/locking and suspension on the left side in front of the axles. Storage compartment between the longitudinal beams in the extended state. Axles + Suspension SAF disc brake axles with 430 mm disc diameter. Last axle with trailing arm, with automatic reversing lock via reversing light and additional locking function on the vehicle via hand knob. Axle spacing offset 1310/1410 mm. Air suspension. 1st axle automatic lift axle, also electrically operated from the truck, with start-up assistance. Braking system 2-line compressed air braking system. Spring brake parking brake. 2 non-interchangeable coupling heads at the front. EBS Wabco, electronic braking system with EBS socket at the front. With raising & lowering valve + auto-reset function. Axle load recognition via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be appropriately pre-equipped. Wheels and tires 385/65 R 22.5" steel rims. Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side. 2 white position lights at the front in LED. 2 white/red side marker lights at the rear in LED. 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front. 1 rotating beacon with bracket, switched via side light. 2 pairs of warning signs, LED illuminated and extendable to 3,500 mm. Flashing side marker lights. Side 7-pin sockets, positioning 2x front panel, 2x support legs, 2x rear end. 1 additional 7-pin socket, in the underrun protection at the rear. 2 additional LED work lights, top inside on the fron

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33901014200, empty load weight: 6,700 kg, maximum load weight: 28,300 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space height: 900 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 2,500 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: grey-black, Chassis, Semi-trailer, Logistics Fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin Outer frame slightly angled, new design with "Load-Lock profile" for securing lashing straps 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without lateral support Free support leg angle or free swivel radius to the rear, approx. 1920 mm 2 support wedges with holder Aluminum side impact protection Steel underrun protection Partial wheel covers in front of and behind each axle Splash flaps in front of the 1st axle and behind each axle with anti-splash protection, according to EC regulations 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable (lock not included) Axles + Suspension SAF drum brake axles "Axle/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension Chodpoza A Txefx Ai Nja 1st axle: automatic lift axle, including forced lowering and starting assist function, activated by "3x braking" (starting assist function is operational up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Axle lift below the recommended ride height, therefore no guarantee for tire damage Braking System 2-line compressed air brake system Color-coded line routing for easy maintenance Spring brake parking brake 2 non-interchangeable coupling heads at the front, without connecting cable EBS, electronic brake system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With raising and lowering valve Vehicle - Driving Stability System Wheels and Tires 235/75 R17.5, brand according to the manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red outline lights at the rear 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front, without connecting cable Floor Sieve-printed panels, approx. 30 mm thick, for high point load capacity for forklift axle load up to max. 5,600 kg Front wall / corner posts 25 mm aluminum hollow profile, 1,350 mm high, corner posts made of steel in a full-volume design Country of Approval / Signage Germany With DEKRA inspection and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for single-row license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint Frame DB 7350 Novagrau Front corner posts: hot-dip galvanized Front wall: aluminum

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33801013475, empty load weight: 7,180 kg, maximum load weight: 28,820 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: silver, available in multiple units Fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin, additional splash guard riveted to the underside as a sheet of metal, in the neck area above the rear axle of the semi-trailer and above the wheels on the vehicle, frame in reinforced design for vehicle loads up to the outer frame, outer frame with "Load-Lock profile" approximately every 400 mm for securing lashing straps, 10 pairs of lashing rings embedded in the top/outside of the outer frame, each rated at 10 tons, 24 tons. Two-stage support winch, single-side operation, with semi-circular lower part and straight connecting plate, with stroke compensation, folding rear support, support wedges with holder, aluminum side impact protection, steel under-ride protection, quarter panel fenders in front of and behind each axle, with additional sheet metal splash guard above the wheels, with anti-spray flaps according to EC regulations, 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable, container locking system, 4 pairs of locking recesses embedded in the floor for 2 x 20 ft or 1 x 40 ft containers, 4 pairs of container locking adapters, (additional transverse support required at the front and rear of the container, the container must rest evenly over its width in conjunction with the locks, transverse supports are not included in the scope of delivery), attachment rail for loading ramps at the rear extension over the entire width, rear extension mechanical, with hand crank, extendable by approximately 1,500 mm, lockable every 500 mm, including under-ride protection with lighting that can be extended, in the wheel well area with Lohr sheet metal, center with steel diamond plate, storage space for loading ramps integrated in the rear extension, usable only when the rear extension is extended by approximately 1000 mm, for transporting the ramps with the rear extension retracted - storage space for ramps in the FR, located to the right in front of the axles. Codpfxjza Aiyj Ai Nsha 1 pair of ramps, 3,000 mm long, 300 mm wide, load-bearing capacity per pair 6,000 kg, electric cable winch, 24 volts, pulling force approximately 8165 kg, mounted centrally at the very front, operated with a wireless remote control, cable length 35 m x approximately 10 mm, with roller cable guide and removable guide rollers. Axles + Suspension: SAF/BPW drum brake axles, at the manufacturer's choice, air suspension, 1st axle automatic lift axle, additionally electrically operable from the truck, including forced lowering and starting aid. Braking System: 2-line pneumatic braking system, color-coded line routing for easy servicing, spring-loaded parking brake, 2 tamper-proof coupling heads at the front, EBS, electronic braking system with EBS socket at the front, without connection cable, with raising & lowering valve with quick vent, holding function in lowered position + auto-reset function, vehicle stability system, axle load recognition via EBS-CAN bus signal. Wheels and Tires: 235 / 75 R 17.5", manufacturer's choice, steel rims in twin arrangement. Electrical System: 24 volts, multi-chamber lights in LED, yellow LED lighting on the side, license plate lighting in LED, 2 white position lights at the front in LED, 2 white/red side marker lights at the rear in LED, 2 x 7-pole and 1 x 15-pole tamper-proof sockets at the front, 2 additional LED work lights at the rear, 1 rotating beacon with holder, switched via parking lights, 2 pairs of warning signs, double LED illuminated and

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33801012811, empty load weight: 6,350 kg, maximum load weight: 28,650 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, color: silver, available in multiple units Chassis, semi-trailer, forwarding agent: fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin, frame in reinforced design for vehicle loading, outer frame with "Load-Lock profile" approximately every 400 mm for lashing straps, 10 pairs of lashing points recessed in the outer frame at the top/outside, each rated at 10 tons, foldable rear supports, 2 wheel chocks with holder, aluminum side underrun protection, steel underrun protection galvanized, quarter panel fenders in front of the 1st axle and behind each axle, with anti-splash flaps behind each axle, 1 spare wheel holder for 1 wheel, with wheel fastening kit, 2 plastic toolboxes, w=600 / h=425 / d=460 mm, lockable, container locking system, 4 pairs of locking devices recessed in the floor for 2 x 20 ft or 1 x 40 ft containers, the foremost position is a foldable locking device, 10 pairs of stake pockets recessed in the outer frame, internal dimension 70 x 40 mm, 10 stake pockets recessed in the middle of the floor, internal dimension 70 x 40 mm, 2 lashing/stake rails recessed transversely in the floor across the entire width up to the outer frame (max. usable internal width between the outer stake pockets approx. 2170 mm), approx. 100 mm high. With 20 mm round steel strips, top and bottom, distance from top to bottom approx. 60 mm (of the round steel). Bottom with angle plate as a closure, open halfway down. For lashing and inserting stakes 80 x 80 mm. Arrangement: Position 2 and 4 according to Fliegl data sheet, 20 stake pockets, hot-dip galvanized, storage space for aluminum ramps, ramps can be slid in from the rear, 3 pairs of foldable eyelets 10 tons in the outer frame (1 in front of the headboard and 2 in the rear area), Axles + suspension: SAF disc brake axles, air suspension, 1st axle automatic lift axle, including forced lowering and starting aid, operation "3x brake", axle lift below the recommended ride height, therefore no guarantee for tire damage Braking system: 2-line compressed air braking system, color-coded line routing for easy service, spring-loaded parking brake, 2 fail-safe coupling heads at the front, without connecting line, EBS, electronic braking system with EBS socket at the front, without connecting cable, with lifting and lowering valve, 2 ride heights, adjustable via hand control, 1 x for saddle height 980 mm, 1 x for saddle height 1100 mm, ride height in conjunction with lift axle, when the lift axle is raised, the loading or overall height increases by 50 mm, vehicle - driving stability system Cjdpfx Aoza Agrsi Noha Wheels and tires: 435/50 R19.5, brand according to manufacturer's choice, steel rims Electrical system: 24 Volt, multi-chamber lights, yellow LED lighting on the side, 2 white position lights at the front in LED, 2 white/red side marker lights at the rear, 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, LED work lights on the side, 1 on the left and 1 on the right, 2 additional LED work lights at the rear, 1 rotating beacon with holder, switched via parking lights, 2 pairs of warning signs, LED illuminated and extendable to 4000 mm, additional 7-pin socket in the underrun protection at the rear Floor: Sieve plate, approximately 30 mm thick, on longitudinal girders for high point load capacity for forklift axle load up to a maximum of 7100 kg, Front wall / front corner posts: 25 mm aluminum hollow profile, 1350 mm high, corner posts steel in box profile, front wall additionally covered with 1250 mm h

Condition: excellent (used), Year of construction: 2015, KUKA used / tested KR60L45-3 Chedpfopxmpiex Ai Nea Year of construction: 07/ 2015 Weight: 665 kg Load capacity: 45 kg Reach: 2230 mm Operating hours: with 7-axis KRC4 controller, connection cable and Smartpad1 X11 interface KL1000 linear axis built in 2015 with a total length of approx. 11 m with cable drag and cable

Condition: good (used), mileage: 999,999 km, power: 345 kW (469.07 HP), first registration: 04/2010, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 6x2, wheelbase: 6,270 mm, fuel: diesel, color: black, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: air, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2010, Equipment: air conditioning, central locking, cruise control, electric window regulation, onboard computer, parking heater, soot filter, spoiler, = Additional Options and Accessories = - Cabin - Particle filter - Sun visor - Auxiliary heater = Notes = Volvo FH460 Berdex 3-deck livestock carrier - Loadlift - Lifting roof - Steering axle - Manual gearbox Year of manufacture: 29-4-2010 Mileage: 1,104,784 km VIN: YV2AG20C3AB558376 License plate: BX-NN-03 APK/TÜV (technical inspection): valid until 27-2-2027 3-deck Berdex Lifting roof Folding floors Loadlift Cjdey Uxqwepfx Ai Nsha Manual gearbox Steering axle = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,780 cc Axle Configuration Suspension: Air suspension Front axle: Tire size: 385/55R22.5; Max. axle load: 8000 kg; Tire tread depth left: 70%; Tire tread depth right: 70% Rear axle 1: Tire size: 315/70R22.5; Dual tires; Max. axle load: 11500 kg; Tire tread depth inner left: 50%; Tire tread depth outer left: 50%; Tire tread depth inner right: 50%; Tire tread depth outer right: 50% Rear axle 2: Tire size: 385/55R22.5; Lift axle; Max. axle load: 7500 kg; Steerable; Tire tread depth left: 40%; Tire tread depth right: 40% Weights Unladen weight: 13,530 kg Payload: 13,470 kg GVWR: 27,000 kg Maintenance, History and Condition APK (technical inspection): valid until 02.2027 Technical condition: good Optical condition: good Identification License plate: BX-NN-03

Condition: new, functionality: fully functional, Year of construction: 2022, overall weight: 150 kg, total height: 2,300 mm, total length: 1,200 mm, total width: 600 mm, controller model: SPS-Steuerung, working width: 300 mm, input voltage: 400 V, input frequency: 50 Hz, compressed air connection: 6 bar, load capacity per stand: 50 kg, number of drawers: 1, positioning accuracy: 1 mm, working height: 30 mm, working length: 400 mm, working range: 400 mm, Equipment: CE marking, safety light barrier, Feeding and storage system for light articles in trays. Feeding of trays for magazine storage in automated production. Especially for surface or contour sensitive parts. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm. • Fast tray change time (4-8 seconds) • Tray weight incl. workpieces max. 5kg • Tray stacker weight max. 50kg • Positioning accuracy ± 1mm Cedpfx Aeyx Hgboi Noha • PLC control with operating and monitoring display • ESD equipment • Safety package light curtain - Leuze for tray stacker • Preparation communication AGV - Siemens IWLAN client • RFID read-write head • Autonomy time increase 1 stack • Machine safety: active door interlock • Low space requirement, due to compact design • Flexible adaptation to different machines, due to different interfaces • Low investment costs • Complete equipment • Stable design • (solid steel construction, powder coated) • No machine adapters necessary • Supply voltage 400V / 50Hz / 3ph • Compressed air connection min. 6bar • Dimension: 1200 x 600 x 2300mm (LWH)

Condition: used, available at short notice Cedpfx Aiex H Svwj Nsha

Condition: used, machine/vehicle number: WFDFLT33901007921, empty load weight: 9,000 kg, maximum load weight: 26,000 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2018, next inspection (TÜV): 02/2027, loading space length: 15,150 mm, loading space width: 2,480 mm, total length: 15,350 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", color: black, Attention, the images shown are archive photos! The vehicle may currently be in use! Weights and Dimensions: Permissible/technical gross weight: 35,000 / 39,000 kg Permissible/technical payload approx.: 26,000 / 30,000 kg Permissible/technical axle load: 24,000 / 27,000 kg Permissible/technical fifth wheel load: 11,000 / 12,000 kg Unladen weight approx.: 9,000 kg +/- build tolerance Overall length approx.: 13,850 + 1,500 mm Maximum overall width: 2,550 mm Overall height approx.: 3,200 mm Internal length approx.: 13,650 + 1,500 mm Neck length approx.: 4,050 mm Lower deck length approx.: 9,600 + 1,500 mm Internal width approx.: 2,480 mm Loading height, lower deck approx.: 900 mm Coupling height approx.: 1,150 mm Kingpin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis, semitrailer for forwarding operations Fine-grained steel welded construction, fifth wheel plate with replaceable 2" kingpin Lashing rings recessed in outer frame, rated at 2.5 t each 24 t two-speed landing gear, single-sided operation, with straight base, without compensator Chocks with holders Aluminium side underrun protection Steel rear underrun protection Quarter-shell mudguards in front of first axle and behind each axle With anti-spray mud flaps behind each axle Rear impact guard Plastic toolbox with drawer and shelf, w=650 / h=520 / d=670 mm Document box at the front bulkhead Telescoping Central beam frame with neatly welded, interlocking telescopic frame components. Extensible by max. 1,500 mm and can be secured after approx. 1,500 mm; outer frame add-on sections approx. 1,500 mm long, for hooking into outer frame in telescoped state. Locking via mechanical pin system. Axles and Suspension SAF drum-braked axles Air suspension Braking System Dual-line compressed air brake system Spring-loaded parking brake Two fail-safe coupling heads at the front, without connecting line EBS (Electronic Braking System) with EBS socket at front, without connecting cable Note: This trailer may only be towed by vehicles that can ensure effective ABS operation! With lift & lower valve Wheels and Tyres 235 / 75 R 17.5 Steel rims in twin arrangement, factory silver Electrics 24-volt, multi-chamber lights, yellow LED side marker lighting Two white position lights at front Chodey Slp Iopfx Ai Nea Two white/red lane position lights at rear 2 x 7-pin fail-safe sockets at the front, without connecting cables Rotating beacon with holder, operated via parking lights (beacon removable) Floor Approx. 30 mm thick phenolic ply boards, high point load capacity for forklift axle loads up to max. 7,100 kg Steel/chequer plate covering in wheel arch area where required Front bulkhead/corner posts 25 mm aluminium hollow section profile, 1,950 mm high, steel corner posts, full height for volume version Approval / Signs With Dekra inspection and certificate Prepared for single-line number plate holder Warning sign according to ECE - 70 Contour marking with reflective strips in accordance with ECE R 048, white on sides and red at rear Attention, the images shown are archive photos! The vehicle may currently be in use!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33903000364, empty load weight: 6,120 kg, maximum load weight: 28,880 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2022, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,800 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", color: silver, Please note: The images are archive photos! The vehicle may still be in use! Weights and Dimensions: Permissible/technical gross weight: 35,000 / 39,000 kg Permissible/technical payload approx.: 28,880 / 32,880 kg Permissible/technical aggregate load: 24,000 / 27,000 kg Permissible/technical fifth wheel load: 11,000 / 12,000 kg Unladen weight (basic version) approx.: 6,120 kg +/- manufacturing tolerance Overall length approx.: 13,800 mm Maximum overall width: 2,550 mm Overall height approx.: 2,388 mm Gooseneck length approx.: 4,050 mm Low bed length approx.: 9,600 mm Loaded loading height in the low bed approx.: 900 mm Internal width approx.: 2,480 mm Coupling height approx.: 950 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis Semi-Trailer Forwarder Fine-grained steel welded construction, fifth wheel plate with replaceable 2" king pin Telescoping front low bed extendable by approx. 1,500 mm, lockable every 500 mm Slightly inclined outer frame, new design with 'Load-Lock profile' for attaching lashing straps 'Patented Load-Lock-Cross' for lashing straps integrated in the cross member under the outer frame 24 t, 2-speed landing gear, single-sided operation, with straight lower part, without compensating support Free landing gear corner dimension and rear swing clearance approx. 1,920 mm Aluminum side underrun protection Steel rear underrun protection Quarter-shell mudguards 9 pairs of lashing/rack rails transverse in the floor, embedded up to the main frame, approx. 100 mm high. With 20 mm round steel rails, top and bottom, distance between upper and lower rails approx. 60 mm (of the round steel). Bottom has angle plate, half open downward. For lashing and inserting stakes 80 x 80 mm (3 pairs in the neck, 6 pairs in the low bed section). 3 pairs of stake pockets recessed in the outer frame, approx. 72 x 42 mm internal dimension Axles & Suspension Drum brake axles according to manufacturer specification 'Axle/chassis laser-aligned' – reduces tire wear and fuel consumption Air suspension Brake System 2-line compressed air braking system Color-coded lines for easy service Spring-loaded parking brake 2 error-proof coupling heads at front, without connecting line EBS, Electronic Braking System with EBS socket at front, without connection cable Note: The trailer may only be towed by tractors with functional ABS! With raise & lower valve Vehicle driving stability system Wheels and Tires 235/75 R17.5, manufacturer at discretion Steel rims, factory silver Electrical System 24V, multi-chamber lights, side-mounted yellow LED lighting (recessed) 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin error-proof sockets at front, without connecting cable 1 additional LED work light at rear, operated via reverse light Floor Anti-slip phenolic plywood panels, approx. 30 mm thick, high point load capacity, suitable for forklift axle loads up to max. 5,600 kg Front wall / Corner stakes front 25 mm aluminum hollow profile, 1,350 mm high Country of registration / license plates Germany Inspection and certification in Bosnia 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white on sides, red at rear Warning sign according to ECE - 70 Chodpfx Asy Slhqei Noa Paintwork Frame: Hot-dip galvanized including passivation '15-year warranty against rust-through' Front corner stakes: Hot-dip galvanized Front wall: Aluminum

Condition: used, axle configuration: 3 axles, first registration: 01/2005, loading space length: 13,600 mm, loading space width: 2,540 mm, total length: 13,950 mm, total width: 2,550 mm, total height: 2,550 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2005, Equipment: ABS, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, Unladen weight: 6,840 kg, Gross weight: 39,000 kg, Type of chassis: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air suspension, ABS, EBS, Year of body construction: 2005, Axle type: BPW = Further Information = General Information Cab: Day cab Registration number: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual transmission Axle Configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tyre tread left: 2 mm; Tyre tread right: 3 mm Axle 2: Tyre tread left: 5 mm; Tyre tread right: 3 mm Axle 3: Steering; Tyre tread left: 2 mm; Tyre tread right: 8 mm Weights Empty weight: 6,840 kg Payload: 32,160 kg GVW: 39,000 kg Environment Chjdpey Atkusfx Ai Nsa Emission class: Euro 0 Condition General condition: average Technical condition: average Visual condition: average Damages: none = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • Good prices • Professional dealings • We speak many languages • We understand our customers • Assistance with import and transportation • (Export) registration plates arranged quickly • Expert technical services • The security of ‘recognizable quality’ • And more.... Visit our website for special offers and our full stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send us an inquiry via our website. Ask directly about our European warranty package.

Condition: new, Year of construction: 2025, Complete set double use laser machine ( 3 and 6 Kw in stock ) sheet metal 3015 ( 3 x 1,5 meter ) Tube 15 to 240 mm diameter tube length 6,3 meters include necessary options for a perfect laser line. Cjdpfxjnqzb Io Ai Njha include 1 filter installation ( cutting air can leave in factory ) include anty fire box. include Vacuum lift for sheet metalplate 800 kg load. no cable unit work on battery in vacuum unit. include 1 compressor for 16 BAR it give posibility to cut steel without gas. for quick cutting and SST steel it save lot of air and can increase the cutting feed consummable for long time cust free cutting time. include vacuume lifter from 800 Kg lifter work on battery in lifter box so with loading machine no cables around you special for save working arear. Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Year of construction: 2026, condition: new, Flexible cut to length lines for standard and mid-range production needs with customized capacity and width options. Bosporas Machinery is a manufacturer of coil processing lines, delivering high-performance and customized industrial solutions worldwide. Our standard and mid-range cut to length lines are designed for precise sheet production from coil with reliable performance, stable operation and flexible configurations. These systems are ideal for manufacturers looking for efficient solutions for medium gauge sheet processing. Available in different capacities and working ranges, the lines can be customized according to customer production targets, material specifications and factory layout requirements. Whether for new investments or production upgrades, Bosporas provides complete turnkey cut to length solutions with international project experience. ⚙️ AVAILABLE CONFIGURATIONS 2 mm | 1300 mm | 4 Ton Cut to Length Line 3 mm | 1500 mm | 15 Ton Cut to Length Line Custom capacities, widths and thickness ranges are available upon request. 📊 TECHNICAL RANGE Material Thickness: 2 – 3 mm Coil Width: 1300 - 1500 mm Coil Weight: 4 Ton – 15 Ton High precision sheet length cutting Stable continuous production performance 🔧 MAIN LINE COMPONENTS Depending on project requirements, the line may include: Hydraulic or Mechanical Decoiler Straightener / Leveler Unit Servo Feeding System Guillotine / Rotary / Hydraulic / Eccentric Mechanical Shear Conveyor Systems Automatic Stacking System Exit Table PLC & HMI Control System ⚙️ ENGINEERING FEATURES High cutting accuracy and repeatability Stable sheet flatness performance Heavy-duty machine construction Servo controlled feeding systems User-friendly automation interface Modular design for future upgrades Designed for industrial continuous operation ⚡ OPERATIONAL ADVANTAGES Flexible production for different sheet sizes Consistent cut quality Reduced labor and handling time Efficient material processing Turnkey project solutions Short lead time compared to European manufacturers 🏭 APPLICATION AREAS Steel service centers Sheet metal distributors Construction materials production Chsdey Dug Hepfx Ai Nsa HVAC manufacturers White goods industry General metal processing companies 📸 REFERENCE PROJECTS Images included in this listing show reference installations of similar cut to length lines successfully manufactured and commissioned in different countries. These references demonstrate our proven engineering capability and international project experience. Additional references, layout drawings and technical details can be provided upon request.

Condition: excellent (used), mileage: 654,094 km, power: 324 kW (440.52 HP), first registration: 05/2012, fuel type: diesel, fuel: diesel, color: other, gearing type: automatic, emission class: euro5, Year of construction: 2012, Equipment: crane, = Additional options and accessories = Chodpjymrdaefx Ai Nja - PTO = Remarks = WMA06SZZ3BP026567 = More information = Empty weight: 12.707 kg Carrying capacity: 6.293 kg GVW: 19.000 kg Crane: ATLAS ATLAS 165 Make of bodywork: ATLAS 165.2E Technical condition: very good Visual appearance: very good Registration number: BL882GP = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: new, Year of construction: 2025, Two tables are connected via a tandem system to achieve a combined load capacity of 5000 kg. Technical description with the following key data: Load capacity: 3000 kg static line load Useful stroke: 800 mm Overall height: 240 mm Total height: 1040 mm Platform length: 1300 mm Platform width: 1000 mm Material: Smooth sheet metal Lifting time: approx. 18 sec. for the full useful stroke Lowering time: load-dependent Electrical connection: 3 x 400 V/50 Hz + protective earth, with 16 A CEE plug and 3-meter cable Motor: 2.2 kW, 1400 rpm Valve voltage: 24 V DC Protection rating: IP 54 generally, solenoid valve and switch IP 65 Paint finish: Steel blue RAL 5011 Unit placement: integrated in the lifting table Control box: Dead man's control including 2 m cable Total weight: approx. 330 kg Tandem control for synchronized operation. Note: No guarantee can be given for 100% synchronous operation. Any height differences that may occur will be compensated for in the base position or upper position. The safety cut-out strips of the two lifting tables are NOT interlocked. Minimum distance: 500 mm between the lifting tables. Maximum distance: 3000 mm between the lifting tables. Cjdpfxek E Hmtj Ai Noha Self-supporting base frame with 4 flanged wheels, into which the lifting table is installed. 4 ball-bearing flanged wheels, wheel diameter 150/175, heavy-duty design for maximum load, made of turned steel C45. Overall height: + approx. 50 mm.

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 4480, total length: 14,500 mm, total width: 7,800 mm, total height: 3,500 mm, overall weight: 20,000 kg, Reichenbacher Machining Center VISION III-TT-L – 5-Axis, 3-Axis, MBG8, 5x SNA Equipment: 5-Axis Unit with Cardanically Mounted Spindle: Max. speed: 24,000 rpm Nominal speed: 10,000 rpm Power in S1*: 15 kW Max. power in S6: 20 kW Torque in S1*: 14.5 Nm Torque in S6: 19 Nm Nominal voltage: 380 V Nominal current: 37 A Nominal frequency: 380 Hz Speed freely programmable from 0 – 24,000 rpm, in 1 rpm increments Clockwise/counterclockwise rotation selectable via program Chjdpeywzq Sofx Ai Nsa Driven by frequency inverter Maintenance-free Water-cooled Hybrid bearings Automatic spindle stop in case of emergency stop Orientated stop for thread cutting Tool holder: HSK-F63 hollow shaft taper according to DIN 69893-6 Max. tool length usable from spindle nose: 240 mm Max. tool weight: 6 kg 3-Axis Unit with Vertically Mounted Spindle: Max. speed: 24,000 rpm Nominal speed: 10,000 rpm Power in S1*: 15 kW Max. power in S6: 20 kW Torque in S1*: 14.5 Nm Torque in S6: 19 Nm Nominal voltage: 380 V Nominal current: 37 A Nominal frequency: 380 Hz Speed freely programmable from 0 – 24,000 rpm, in 1 rpm increments Clockwise/counterclockwise rotation selectable via program Driven by frequency inverter Maintenance-free Water-cooled Hybrid bearings Automatic spindle stop in case of emergency stop Orientated stop for thread cutting Tool holder: HSK-F63 hollow shaft taper according to DIN 69893-6 Max. tool length usable from spindle nose: 240 mm Max. tool weight: 6 kg 8-Spindle Drilling Unit (1 unit): L-Shape, Grotefeld Drill spindles: individually selectable Rotation direction: clockwise/counterclockwise Pitch: 32 mm Power: 2.5 kW Speed: 5,000 rpm fixed Z-axis stroke: +75 mm Holder: D = 10 mm H7 Plunge stroke: 80 mm Grooving Unit (5 units): GROTEFELD Angle Saw Unit F100-S The working/milling stroke is pneumatic. Drive: three-phase motor with multi-ribbed belt LEFT version Drive rotation direction: clockwise/counterclockwise Speed reduction: 1:2.86 – belt drive Power: 2.20 kW – 220-240/380-415 V – 50 Hz Speed: n1 = 2,800 rpm, n2 = 8,011 rpm at 50 Hz Spindle power: 2.2 kW Feed: 150 mm Tool holder: Ø30 x 1.5 mm – 5.0 mm Tool holder rotation: opposite to drive rotation direction Feed force: 2565 N Underfloor Drilling Unit in Machine Bed (1 unit): GROTEFELD Angle Milling Head G06-1.1-P The working/drilling stroke is pneumatic. Drive motor: 1.1 kW 220-240/380-415 V 50-100 Hz Drive rotation direction: clockwise Speed reduction: 1:1.55 gear drive Drive speed: 2,800 – 5,600 rpm Tool spindle speed: 4,340 – 8,680 rpm Tool holder: 1x HI-Q/ERM25 DIN6499-C (8°) For ER25 collet DIN 6499-B Ø0.5–16 mm max. Tool holder rotation direction: clockwise Flange clamping piece: FK45 Feed slide: with pneumatic cylinder and double steel guideways Feed: 80 mm

Year of construction: 1998, condition: used, Max. saw blade diameter: 350 mm Chedexvzdtspfx Ai Nea Manual material tensioner

Condition: new, functionality: fully functional, Year of construction: 2022, overall weight: 150 kg, total height: 2,300 mm, total length: 1,200 mm, total width: 600 mm, load capacity per stand: 5 kg, working range: 400 mm, Feeding and storage system for light articles in trays. Feeding of trays for magazine storage in automated production. Especially for surface or contour sensitive parts. Cedpfx Ajxrgkwji Noha Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm. • Fast tray change time (4-8 seconds) • Tray weight incl. workpieces max. 5kg • Tray stacker weight max. 50kg • Positioning accuracy ± 1mm • PLC control with operating and monitoring display • ESD equipment • Safety package light curtain - Leuze for tray stacker • Preparation communication AGV - Siemens IWLAN client • RFID read-write head • Autonomy time increase 1 stack • Machine safety: active door interlock • Low space requirement, due to compact design • Flexible adaptation to different machines, due to different interfaces • Low investment costs • Complete equipment • Stable design • (solid steel construction, powder coated) • No machine adapters necessary • Supply voltage 400V / 50Hz / 3ph • Compressed air connection min. 6bar • Dimension: 1200 x 600 x 2300mm (LWH)

Condition: new, Year of construction: 2025, Flowpacker with Box Motion System for extra wide and high products. Bottom loader. Conveyor belt, longitudinal and end sealing servo driven, PLC controlled, operation via touch screen. "No product - no bag" function. - Specifications: max. speed of the machine in neutral: 40 cycles/min; bag dimensions (not product dimensions): L(80-unlimited)xW(50-320)xH(3-140)mm, note W+H max. 320mm; suitable film width max.: 680mm; suitable film thickness: 30-75µm; number of knives: 1 pcs; end sealing: reciprocating; number of servo motors: 3 (feeding, longitudinal and end sealing); standard machine housing: painted steel; parts in contact with product: stainless steel 304; power supply: 220V, 1-phase, 50Hz; rated power: 5.7kW; dimensions of the machine (LxWxH): 5000×1200×1650mm; weight: 920kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Codsv Nlgvopfx Ai Nsha

Condition: used, axle configuration: 3 axles, first registration: 10/2018, suspension: air, tire size: 445/45 R19,5, color: silver, mileage: 477,069 km, gearing type: mechanical, Equipment: ABS, EU vehicle, tire size: 445/45 R19.5, 1st axle: , 2nd axle: , 3rd axle: , air suspension, axle load indicator, lifting roof, bumpers Chedpfx Aiev Nrdns Noa

Condition: good (used), For max. glass size: 6000x3210 mm Load capacity: 2x10000 kg Codpfx Aisyhnr As Njha Support depth: 500 mm per side Total height: approx. 3280 mm Length: approx. 5800 mm Depth: approx. 1500 mm

Condition: used, functionality: fully functional, empty load weight: 690 kg, maximum load weight: 2,810 kg, overall weight: 3,500 kg, first registration: 02/2013, loading space length: 2,800 mm, loading space width: 1,750 mm, loading space height: 600 mm, total length: 4,900 mm, total width: 2,330 mm, total height: 950 mm, trailer brake: trailer braked, Year of construction: 2013, SDAH Platform Trailer: + Gotha + First registration: 14.02.2013 + TL 35.27x17C + Trailer for roll-off container transport / low-loader + Truck towing eye + Loading area: 280 cm x 175 cm Chsdpfx Aioymfb Es Nja + Loading edge: 60 cm + Container rail: 220 cm + Lashing eyes + Unladen weight: 690 kg; permissible total weight: 3,500 kg; payload: 2,810 kg + Overall dimensions: 490 cm x 233 cm x 95 cm (LxWxH) Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and omissions excepted; subject to prior sale!

Condition: new, incl. aluminium floor / ramp compartment with ramps / many lashing points / manual hand winch Technical Data: • Brand: Martz • Model: GT PLATEAU 500 • Vehicle type: Car transporter • Vehicle condition: New vehicle • First registration: None • MOT/Inspection: 2 years from first registration • Internal dimensions (LxWxH): 507 x 211 x 0 cm • External dimensions (LxWxH): 657 x 215 x 97 cm • Perm. total weight: 3,500 kg • Unladen weight: 764 kg • Payload: 2,736 kg • Chassis: Platform trailer (wheels under the bed) • Tyres: 195/55R10C • Suspension: KNOTT rubber torsion axle • Jockey wheel: Yes • 100 km/h approval: Optional, retrofittable DESCRIPTION • Aluminium profile floor • incl. manual hand winch with brake Codpfx Asx Tbitei Neha • Loading ramp compartment underneath deck • 2x steel ramps for loading • Aluminium side walls can be retrofitted at any time • Insert sleeves at all 4 corners for tarp bows, mesh extension, side wall extensions, or raised front panel • Very robust welded steel frame • Frame fully hot-dip galvanised by immersion • Very low chassis for a minimal approach angle • Numerous continuous cross-members welded in for high point load capacity • 10x recessed lashing rings in side frame profile (600dAN/kg) certified • Automatic reverse mechanism • KNOTT overrun clutch and parking brake • Reinforced, very stable V-drawbar • 13-pin plug • Reverse lights • Large, heavy-duty safety lighting • Integrated rear fog light • Rear frame lighting recess-mounted • Rear LED side marker lights • Automatic jockey wheel Optional accessories – available on request: • 100 km/h approval with shock absorbers • Wheel chocks • Side panels • Anti-theft device • Spare wheel • Storage box • Reversing lights • Lashing straps • and more. Brand new vehicle with warranty and MOT. - Financing or leasing available - Nationwide delivery possible - All prices incl. VAT - Vehicle registration documents can be sent in advance or transport plates (Germany) can be provided. - Export plates incl. customs declaration available Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for immediate delivery! We have been specialists and a repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberté / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, mistakes, and prior sale excepted -

Condition: used, Tilting Rotary Table Shelf diameter: Ø 300 mm Chodpfxezmxtgj Ai Nea Manual tilt vertically + horizontally Maxi vertically tilt: 90° Base/shelf height horizontal position: 250 mm Height in vertical 90° position: 400 mm Seating Surface: Length 450 mm x Depth 500 mm x Height 250 mm Weight: approx 200 kg

Condition: good (used), Year of construction: 2017, operating hours: 470,000 h, functionality: fully functional, machine/vehicle number: 1HA06A, overall weight: 2,200 kg, type of input current: three-phase, total width: 12,000 mm, total length: 40,000 mm, total height: 1,600 mm, power: 11 kW (14.96 HP), working width: 3,200 mm, number of ink cartridges: 6, used machine, working state Cedettunyjpfx Ai Njha