Used Samo Ocemi 2016 Samo Ocemi Stainless Slitter 1500X3 for sale (8,544)

Condition: used, Used Netzsch approximately 1,000 litre stainless steel vertical jacketed mixing vessel. Unit has welded flat top and bottom heads. External jacket rated 3 bar working pressure. Unit has top entry stainless steel anchor type agitator with drive and stainless steel high shear agitator with drive. Unit is mounted on (4) legs with forklift attachment. Hodpfx Aszun Hregtont Specifications: Capacity: 264.2 gal Type Of Heads: Flat top and bottom heads Vertical/Horizontal: Vertical Legs/Lugs/Skirt: 4 legs with forklift attachment

Condition: used, Used Zeppelin / Henschel Model FM1000 stainless steel high intensity mixer. Approximate capacity: 1,000 litre (product dependent). Stainless steel mixing chamber rated atmospheric pressure at 200°C. External mild steel heating / cooling jacket rated 5 bar pressure at 95°C. Unit includes 3-tier mixing attachment bottom driven by 250 kW, 1490 rpm, 280/660 V, 50/60 Hz motor. Has a top-clamped lid. Includes pneumatically operated discharge valve. Hnedpfx Aezun Hfogtet

Condition: used, Used Vale Engineering Services approximately 12,000 litre working capacity (13,110 litre total capacity) 316L stainless steel vertical reactor / hydrogenation vessel. Unit measures approximately 1,750mm diameter x 5,000mm straight side (tan to tan). Unit has welded dished top and bottom heads. Internal rated 18 bar / full vacuum design pressure at -10 to 180 deg.c. External 304L stainless steel coil jacket rated 11 bar design pressure at -10 to 180 deg.c. Unit has top entry 316L stainless steel 4-tier, 6-blade agitator driven by 15kW, 1465rpm, 50hz electric motor with mechanical seal and reduction gearbox. Unit is mounted on (4) side support lugs. Specifications: Hodpfx Agszun D Detont Capacity: 12,000 L Type of stainless: 316L Contact Parts Internal Pressure: 18 bar Internal Temperature: -10,180°C Jacket Pressure: 11 bar Diameter: 1,750 mm Straight Side: 5,000 mm Type Of Heads: Dished Legs/Lugs: 4 Lugs

Condition: used, Used Wolfking model 100 L BL stainless steel twin-shaft ribbon mixer. - Manufacturer: Wolfking - Model: 100 L BL - Total volume: 110 litre (approximately) - Mixing chamber dimensions: 770 mm x 501 mm x 305 height mm (approximately) - Type of agitators: Twin uninterrupted ribbons Hodpfx Agjzunvyetont - Dimensions of agitators: diameter 290 mm x 770 mm long (approximately) - Drive: 0.75 kW, 220/380 V, 1400 rpm (belt driven through gearbox) - Includes: Control panel

Condition: used, Very little used Quickstep Anticorro stainless steel reactor. Vessel: - Manufacturer: Quickstep Anticorro - Total/working volume: approx 2897 / 1900 liters - Designed material: Stainless steel AISI 304 - Design type: Clamped dished and hinged top and welded dished bottom - Dimensions: approx 1706 mm diameter x 2471 mm height (3580 mm height with lid open) - Maximum pressure and temperature of the vessel: -1/1 bar at 0 to 100°C - Maximum pressure and temperature of jacket: -1/2,5 bar at 0 to 135°C - Mounted on stainless steel legs. Agitator: - Bottom entry frame agitator MIX Brno model 60 MP 30 - The agitator is designed for mixing creams, gels and ointments with a maximum weight of 1100 kg/m3, maximum viscosity 10000 cP at a temperature up to 100°C and maximum particle size 10 - 80 μm. - Drive through NORD gear drive 7.5 kW, 1460 rpm, 50 Hz - final rpms of the agitator at 50 Hz is 42 rpm. Hnjdszunptopfx Agtet Specifications: Capacity: 1,900 L Type of stainless: AISI 304 Internal Pressure: -1 bar Internal Temperature: 100°C Jacket Pressure: 2 bar Jacket Temperature: 135°C Legs/Lugs: Legs

Condition: used, Comprehensively tested, used Kemutec approximately 400 litre working capacity (product dependent) 316 stainless steel ribbon blender. Trough measures approximarely 1680mm Long x 580mm wide x 700mm deep. Has stainless steel single interupted ribbon driven by 5.5kw motor & gearbox. Unit includes stainless steel hinged lid with clamps. Includes bottom discharge valve. Hnedpfx Ageyma Dbotot Specifications: Capacity: 14.1 ft³ Material of construction: 316 stainless steel Width: 22.83" Horsepower: 7.4 hp Length: 66.14" Jacket: No

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: J22143, total length: 5,200 mm, total height: 2,391 mm, type of input current: AC, outer diameter of label roll: 400 mm, inside diameter of label roll: 75 mm, overall weight: 800 kg, input voltage: 380 V, Performance specifications: Product: Minimum height 40mm Maximum height 330mm Maximum diameter 150mm Minimum diameter 15mm Labels: Maximum outer roll diameter 400mm Inner roll diameter 75mm Maximum label width 150mm Application speed min 70 ppm Conveyor speed max (infinitely adjustable) 27.5 m/min min 7.5 m/min Dimensions Overall height 2391mm Length 5200mm Power supply Electrical 380V AC (three-phase) 50/60Hz, 4kVA Pneumatic 0.06 m3/min Protection class IP20 Hedpfszv S Rwsx Agtjnt Parameter control via Allen Bradley PanelView Plus 700 Condition: Functional, professionally dismantled Note! System is sold without the Cognex camera system Further information available upon request

Year of construction: 2023, condition: new, outer diameter: 22 mm, We sell 12 lengths of 3m stainless steel pipe seamless (1.4301) 1 length = approx. 2,250 g Wall thickness 1.5 mm Outer diameter 22 mm 740 € for total purchase / individual lengths for 66 € per piece. Hjdpfxjr D I S Re Agtsnt Shipping by forwarding agent at the buyer's expense. Collection possible on working days or Saturday mornings.

Condition: good (used), Pressure vessel, pressure tank, pressure vessel, -Pressure tank: Stainless steel compressed air tank -Contents: approx. 1.5 liters -Item No.: 4541 ABD10 190 -Number: 19 containers available Hjdezucb Dopfx Agtsnt -Price: per piece -Dimensions: 385/150/H105 mm -Weight: 4.2 kg/pc.

Condition: used, Used Enrico Molteni model ED30 stainless steel disperser. Unit is driven by 22kw motor. Has stainless steel mixing pot with clamping section. Includes hydraulic powerpack for raise & lower. Hjdpsymaxfjfx Agtjnt

Condition: ready for operation (used), Stainless Steel Conveyor Belt, Conveyor System, Assembly Line, Used Equipment Overall Dimensions: Length: 2760 mm Width: 860 mm Height: 1850 mm Electrical Data: 400V Manufacturer: Lange year of manufacture: 2020 Hsdpfxsv Uznao Agtont 1st Belt: Size: 1400 x 390 mm Speed: 18 meters/min 2nd Belt: Size: 1700 x 400 mm Slat Spacing: 140 mm Slat Size: 300 x 20 mm Speed: 14 meters/min

Condition: used, Year of construction: 1996, Technical Data: Working width: 1200 mm Materials: BOPP, OPP, CPP, PET, OPA Parent roll diameter: 800 mm Final roll diameter: 600 mm Maximum speed: 300 m/min Hnjdpfx Ajx Ezwzsgtet Web guiding system: Yes Knife type: Razor & rotary blades Trim exhauster: Included

Condition: used, Year of construction: 2014, Material: PET aluminum-metallized film Material thickness: 9–50 μm Web width: 500–2000 mm Roll width: 2100 mm Web diameter (unwind): max. φ1150 mm Web weight (unwind): max. 1500 kg Product winding diameter: • φ600 mm (3” friction shaft) • φ750 mm (6” air shaft) Winding shaft load: max. 500 kg/shaft (center-supported) Core dimensions: • Web core: 3” (φ76.2–76.5 mm), 6” (φ152.4– 153 mm) • Product core width: 100–1050 mm Slit width: 200–1950 mm (up to 5 slits) Machine speed: max. 400 m/min Typical operating speed: 200–250 m/min Unwinding tension: • 50–500 N (φ650 mm or less) 1. Unwinding Section • Shaftless single-axis fixed unwind • Direction: upward or downward • Automatic tension control with feedback detector • Dancer roll included • Core clamping: rotary mechanical chuck • Core sizes: 3” standard, 6” via adapter • Web alignment: manual ±5 mm, automatic ±100 mm 2. Main Drive Rollers • Multiple rollers with specified diameters and surface finishes • Nip and touch rollers with pneumatic pressure control 3. Slitting Mechanism • Upper/lower NC shear cutter • Number of blade units: 6 upper + 6 lower • Slit width adjustment via touch panel • Accuracy: ±0.1–0.2 mm • Dust suction: upper blade nozzles + lower blade suction • Optional razor cutter (manual adjustment) 4. Mini Winder Placement: below slitter Units: 2 (left / right) Drive: AC servo motor Tension: dancer roll control Traverse width: 300 mm Winding diameter: φ500 mm 5. Winding Section • Duplex center drive • 3” air friction shaft + 6” air shaft • Automatic tension control linked to winding diameter • Touch roll with pressure control • Core positioning via collar bar 6. Product Discharge • Hydraulic lift tray • Motorized slide-out with tilt mechanism Electrical & control: Line motor: 7.5 kW AC servo Winding motor: 11 kW AC induction Unwinding motor: 11 kW AC servo Static eliminators: 5 units (Keyence SJ-HA) Control panels: main panel, winding panel, unwind panel, mini winder panel, auxiliary panel Hnjdpex Ez Umsfx Agtst PLC: Fuji Electric Utilities, dimensions & environment: Power supply: AC 200 V, 60 Hz, 3-phase Power consumption: 70 kVA Air supply: 0.5 MPa, 500 L/min (dry air) Machine weight: approx. 12 tons Paint color: urethane coating (E-31872) Installation environment: cleanroom Class 10,000 Floor load capacity requirement: ≥ 2 ton/m²

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: Hnjdpfx Aoyx Uy Asgtot • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Condition: like new (used), Year of construction: 2015, Reel width: 2000 mm Slitting width 300 – 1700 mm Max unwind diameter: 800 mm Max. rewind diameter: 600 mm Slitting method: Razor Rewind shafts: Dual rewinding shafts Max mechanical speed: 400 m/min AC Servo motor with tension control Web guiding Material types BOPP, PET, PE, laminated film, foil, paper Hnjdpewvv Hfjfx Agtet

Condition: used, Comprehensively tested and refurbished, used Morton-Lödige model FKM600 stainless steel jacketed ploughshare type mixer. Manufacturer: Morton Material: Stainless steel External Jacket: Stainless steel rated 5.5 Bar design pressure at 162 deg.c. Capacity: Approximately 150-450 litre working capacity, 600 litre total capacity (product dependent) Discharge Type: Bottom bomb door style with pneumatically operated door. Type Of Blades: Stainless steel shaft with Becker-shovel type blades Motor: 22kW motor with gearbox Also includes: Provision for (2) side entry choppers. (Not fitted). Hodpfx Agoykn Sbstent

Condition: used, Comprehensively tested and refurbished, used Winkworth model model RT400 stainless steel high speed ploughshare (T-Arm) mixer. Manufacturer: Winkworth Hnsdeymayiepfx Agtot Material: Stainless steel Year of Manufacture: 2016 Capacity: 400 litre (product dependent) Mixing trough: 1,300mm long x 800mm diameter. Type Of Blades: T-Arm ploughshare blades with drive/gearbox. Specifications: Bowl Volume: 105.7 gal Material Of Construction: Stainless steel Dimensions: 1300mm long x 800mm diameter

Condition: good (used), Conveyor belt, belt conveyor, conveyor belt, belt conveyor, conveyor belt -Body: made of stainless steel -1x conveyor belt speed: 16 m/min -1x conveyor belt speed: 8 m/min -Drive: 0.55 kW -Transport belt: with carrier -Belt width: 695 mm Hnjdpfxodahcve Agtst -Length: 4500 mm -Number: 2x conveyor belts available -Price: per piece -Transport dimensions: 4550/1000/H1630 mm -Weight: 450 kg

Condition: used, Comprehensively tested and refurbished, used Winkworth model RT400 321 stainless steel high speed ploughshare (T-Arm) mixer. Manufacturer: Winkworth Material: Stainless Steel (321) Capacity: 400 litre (product Dependent) Mixing Chamber: 1,300mm long x 800mm Diameter Type Of Blades: T-Arm Blades Motor: 5.5kW Motor and Gearbox Also Includes: External Mild Steel Jacket Provision for One Chopper but None Currently Fitted. Specifications: Bowl Volume: 105.7 gal Hsdpfx Ajymazgegtent Motor Power: 5.5 hp Material Of Construction: Stainless Steel (321) Choppers (Y/N): No Jacket (Y/N): Yes Dimensions: 1300mm long x 800mm Diameter

Condition: used, Used Morton-Lödige model FKM600D 321 stainless steel contact parts ploughshare mixer. Material: 321 Stainless steel Capacity: 600 litre total capacity. 200-420 litre working capacity (Product Dependent) Container Dimensions: 790mm diameter x 1240mm long Discharge Type: 300mm x 240mm centre bottom outlet with pneumatically operated valve. Type Of Blades: 321 stainless steel ploughshare blades Motor: 37kw, 1500rpm, 3/50 motor with Flender gearbox giving reduction ratio of 14:1. Unit includes: provision for 2 choppers. Hedpfx Asykn T Ejgtsnt - x2 400mm x 450mm side access doors. - Mounted on a mild steel frame A video of this mixer is available below. Specifications: Bowl Volume: 158.5 gal Motor Power: 37 hp Material Of Construction: 321 Stainless Steel Choppers (Y/N): Yes Number Of Choppers (1-10): 2 Revolutions Per Minute: 1500 Dimensions: 790mm diameter x 1240mm long

Condition: used, Used Becomix model RW30CD stainless steel process vessel. Approximate 2-25 litre working capacity (product dependant). Unit has clamped dished top head and welded conical bottom head. Internal rated 29psi (2 bar) maximum allowable working pressure at 273 deg.f. (133 deg.c.) and 15psi (FV) maximum allowable external working pressure at 41 / 273 deg.f. (5 / 133 deg.c.) Minimum design metal temperature 41 deg.f. (5 deg.c.) at 29psi (2 bar). External stainless steel jacket rated 58 psi (4 bar) maximum allowable working pressure at 41 Deg.F. (5 deg.c.) to 306 deg.f. (152 deg.c.) Unit has top mounted agitator with electric drive/gearbox and bottom entry homogenizer with electric drive. Unit mounted in a stainless steel mobile frame. Hedpfxsyhd Iys Agtjnt Click on the link below to see a video of the machine running.

Condition: good (used), Year of construction: 2016, clamping force: 13,000 kN, Equipment: documentation/manual, KraussMaffei KM 1300 MX – SP 8100 / Screw Ø105 mm Clamping Unit 1. Clamping force: 13,000 kN / 1,300 t 2. Mold opening force: 910 kN 3. Moving platen force, opening/closing: 159 / 153 kN 4. Platen dimensions: 2,150 × 1,910 mm 5. Distance between tie bars (H × V): 1,550 × 1,250 mm 6. Opening stroke: 2,350 mm 7. Mold height min./max.: 700 / 1,400 mm 8. Maximum daylight: 3,050 mm 9. Ejector stroke: 350 mm 10. Ejector force forward/backward: 250 / 125 kN 11. Optional increased mold height min./max.: 950 / 1,650 mm 12. Daylight with increased mold height: 3,300 mm Injection Unit – SP 8100 Screw diameter: 105 mm 1. L/D ratio: 23 2. Maximum injection pressure: 1,778 bar 3. Stroke volume: 4,546 cm³ 4. Shot weight PS: 4,137 g 5. Injection flow rate: 805 cm³/s 6. Screw speed nominal/max.: 126 / 159 rpm 7. Plasticizing rate PS at nominal speed: 147 g/s 8. Plasticizing rate PE at nominal speed: 116 g/s 9. Plasticizing rate PS at maximum speed: 187 g/s 10. Plasticizing rate PE at maximum speed: 147 g/s 11. Nozzle contact force: 166 kN Electro-Hydraulic Equipment 1. Pump motor rated power: 110 kW 2. Installed heating capacity: 59 kW 3. Barrel heating/control zones: 7 4. Dry cycle rate according to Euromap 6: 761 cycles/h 5. Dry cycle time according to Euromap 6: 4.7 s 6. Oil tank capacity: 1,500 l Dimensions & Weight 1. Net weight incl. control cabinet: 77 t 2. Dimensions (L × W × H): 12.09 × 3.66 × 2.67 m 3. Maximum mold weight: 29,000 kg With Electric Screw Drive 1. Screw drive power: 117 kW 2. Screw speed nominal/max.: 123 / 193 rpm 3. Plasticizing rate PS nominal: 144 g/s 4. Plasticizing rate PE nominal: 114 g/s 5. Plasticizing rate PS maximum: 226 g/s 6. Plasticizing rate PE maximum: 178 g/s With Accumulator (ZE) 1. Injection flow rate: 1,732 cm³/s Equipment: 1. Removable tie bar (rectable tie bar) Hnedpoztpkpjfx Agtet 2. Euromap 67 for robot 3. 48 Hotrunner controllers 4. 8 pneumatic cascades 5. 6 hydraulic cascades 6. 2+2 cores 7. MC 6 controll panel Material used: PP, PC

Condition: used, Perry is offering a high quality used Winkworth model ZX190-9 stainless steel mixer / extruder. Manufacturer: Winkworth Material: Stainless steel Year of Manufacture: 2018 Hnsdpfx Aozfh Uqegtst Capacity: 190 litre (product dependent) Type Of Blades: (2) stainless steel wing blade shafts Motor: 11kw motor & gearboxes Also Includes: main electrical control panel - Separate ICS model i-Temp ci 90t 18 heating/cooling unit. - External jacket rated 3.5 bar design pressure at 250 deg.c. - Top mounted Coperion model P30-BV-150 vacuum sequencing receiver with rotary lock valve. This unit is ready to run. A video of this mixer is available below.

Condition: used, - Flat bottom tank with 2% slope - Brand : ALFA LAVAL - Total capacity : 30200 liters - Material : 316 L stainless steel - Interior finish : Cold rolled - Exterior finish : Cold rolled - Temperature controlled ROOF - Conical - 1 off-center chimney at the front Ø 200 mm - 2 stainless steel flags - 1 thermometer - 6 lifting rings RING - 1 oval door 310×420 mm - 1 partial drain valve DN 65 - 1 connection for level sensor Hnedpfx Agew Ngqtetet BOTTOM - 2% sloped plate with drain - 1 total drain valve with plug DIMENSIONS - Diameter : 2800 mm - Total height : 6000 mm - Ferrule height : 4800 mm - Conical upper dome : 500 mm - Chimney : 300 mm

Condition: good (used), 13500l stainless steel tank, AISI316L steel grade, Diameter 2.30m, Height 3.50m, Cylinder wall thickness 2.1mm, Thickness of the bottom 3.4- 4 mm, 3 units available The tank requires a concrete spout or a platform on which the drain valve will be based (platform available at additional cost) Hnedpfxom Tv D Rj Agtst