Used Rounding for sale (3,862)

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 450x320 saw band length 4250x34x1,1 mm band speed 40 + 80 m/min table height 845 mm saw band width 34 mm total power requirement 2,2 kW weight of the machine ca. 0,985 t dimensions of the machine ca. 1,4 x 2,0 x 2,2 m Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I · miter left + right 60° without machine conversion · 34 mm saw blade width · Large material support turntable, ball bearings · To position the saw blade guides using a very wide linear guide · Strong, robust transmission · Large chipboards · Infeed and outfeed roller Removable chip tray (disinfection) · Free-standing control panel, safe and ergonomic · Storage space for tapes, consumables · Cutting pressure regulator Feed regulator · Fully hydraulic vise Preload super fast (front loading) · Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Optimum, material-independent cutting result through fine adjustment of the saw frame by means of: *Pressure Control Valve (Cutting Pressure Force) *Feed Control Valve (Speed) *Switch with pictogram, easy and clear to use Dedefgyicjpfx Ailecn

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 820x610 saw band length 5850 x 41 x 1,3 mm band speed 15 - 100 m/min table height 800 mm total power requirement 5,5 kW weight of the machine ca. 4,45 t dimensions of the machine ca. 5,85 x 3,6 x 2,7 m 2-column band saw for quick cutting, K-tech 800H with pusher system P 15. P 30 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This Dcedpfx Aefgyifeilsn ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 1250x600 saw band length 8140x54x1,6 mm band speed 15 - 90 m/min table height 855 mm total power requirement 7,5 kW weight of the machine ca. 4,96 t dimensions of the machine ca. 5,7 x 4,0 x 2,75 m 2-column band saw for quick cutting, K-tech 1200H with pusher system P 30. P 60 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Dsdofgyigopfx Ailjcn Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 820x610 capacity 45 degrees: round 550 mm capacity 45 degrees: square 550 mm capacity 45 degrees: flat 550x600 mm capacity 60 degrees: round 370 mm capacity 60 degrees: square 370 mm capacity 60 degrees: flat 370x600/450 mm saw band length 7260 x 41 x 1,3 mm band speed 15 - 100 m/min table height 800 mm total power requirement 5,5 kW Dsdpfsfg E Hmox Ailocn weight of the machine ca. 4,8 t dimensions of the machine ca. 5,85 x 3,7 x 2,7 m 2-column double miter band saw for quick cutting with pusher system P15. Option P30 Hydraulic saw frame lowering • NC controlled • Automatic angular positioning from + 60° to – 60° High quality automatic miter adjustment Special development for cutting profiles and beams. The highest positioning accuracy is achieved via the new “B&S positioning system”. reached. An intelligent NC control ensures smooth interaction of linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake using large radial center positioning. The work table is supported by high-quality preloaded bearings, which ensure very smooth rotation. CNC Control A CNC control allows the programming of up to 90 cutting programs with different section lengths, quantities and mitres. Positioning system gripping on both sides The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, cutting diameter 185 mm saw band length 2.085 x 20 x 0,90 mm table height 915 mm band speed 35/70 m/min capacity 90 degrees: round 185 mm Djdpfx Aijhpktrelscn capacity 90 degrees: square 150 mm capacity 90 degrees: flat 220 x 150 mm connected load frequency 400 V total power requirement 0,8 kW weight of the machine ca. 195 kg dimensions of the machine ca. 550 x 1.280 x 1.740 mm mm Metal band saw with stepless electronic speed control and automatic lowering. • Selector switch for hydraulically controlled or manual band arm lowering • Saw arm can be swiveled up to 60 ° to the right • Quick-action vice • Belt guide with 8 ball bearings • Hydraulic saw band tension with tension pressure display and band break shutdown •Incl. Coolant system •Incl. Machine cabinet

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350x200 Djdpfx Aoupw R Aoiljcn saw band length 3375x27x0,9 mm band speed 18 - 100 m/min table height 880 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,84 t dimensions of the machine ca. 1,85 x 1,9 x 2,0 m Demonstration system for a SPECIAL PRICE!! Fully automatic miter band saw • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start recognition) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm. Inclusive: - Micro-spray device - Leveling elements

Condition: used, Year of construction: 1998, capacity 90 degrees: round 250 mm capacity 90 degrees: square 240 mm saw band length 2965 x 27 x 0,9 mm table height mm band speed 37 / 76 m/min total power requirement 1,0 kW weight of the machine ca. 0,38 t Dsdpfsu Sbpvjx Ailecn dimensions of the machine ca. 1,0 x 1,6 x 1,4 m double miter band saw

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden at [phone number]. Holp Vario Bucket / VL.112.400 / MS08 / HARODX / NEW / in stock & immediately available Price: €4,270.00 net / €5,081.30 gross - Excavators from - to: 7 tons – 14 tons - Own weight approx.: 320 kg Dcodpfsyhykzex Ailen - SAE capacity: 400 liters - Angle of repose: 54° - Radius of excavation floor: 150 mm - The bucket is made entirely of HARDOX Advantages of the Holp Vario Bucket: - Large surface area - Robust design with high-quality materials - Minimal weight due to optimized triangular construction - Rounded floor - Two working openings - Rectangular working opening - V-shaped - The Vario bucket impresses with its high performance and clean operation. It enables precise dumping through the V-shaped opening and offers a very high excavation rate in towed operation. Wherever more speed and flexibility are needed in handling a wide variety of tasks, the Vario bucket is a real asset on the construction site: it is faster, more adaptable, and safer. We have many other Holp products in our warehouse that are immediately available! Please contact us at [phone number] or [email address] for more information. Upon request, we will also be happy to provide you with a financing offer. We are an official Holp sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply you with the complete Holp range! Subject to errors and prior sale! = Further information = New: Yes Intended use: Construction Unladen weight: 320 kg Please contact Marius Herden for further information.

Condition: used, mileage: 81,396 km, power: 110 kW (149.56 HP), first registration: 06/2023, fuel type: diesel, next inspection (TÜV): 05/2027, color: black, gearing type: mechanical, number of seats: 9, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, navigation system, parking heater, soot filter, Thank you for your interest in one of our vehicles. We, ALLROUND Autovermietung GmbH, offer a well-maintained vehicle for sale. If you are interested in this vehicle, please contact us by phone or email to arrange a viewing appointment. The vehicles are not always located directly on our premises. VEHICLE IS LOCATED IN DRESDEN! Special features: Acoustic package, trailer socket 13-pin, DAB tuner (digital radio reception), window in the cargo/passenger compartment: - sliding, front left, window in the cargo/passenger compartment: - sliding, front right, generator 250 A, folding cover for storage compartment, multimedia system MBUX (7" touchscreen), hands-free system Bluetooth, multifunction steering wheel, navigation system for MBUX multimedia system, parking package with reversing camera, mud flaps rear, seat equipment: comfort headrest, passenger seat, seat cover / upholstery: fabric Caluma, seats in the cab: passenger double seat, seats in the cab: driver's seat heated, seats in the cab: driver's seat comfort, seats in the cargo/passenger compartment: 1st row, 3-seater comfort bench, seats in the cargo/passenger compartment: 2nd row, 3-seater comfort bench, rear windows tinted / black glass, front axle reinforced Other features: Dedpfx Ajz H Emkoilscn 3rd brake light, storage compartment above the front windshield, storage compartment below the dashboard on the passenger side, storage: luggage net on the rear doors, storage net on the front seat backrest left, towing eye rear, adaptive brake light, airbag passenger side, airbag driver side, exterior mirrors electrically adjustable and heated, both, outside temperature display, floor panel combi version, headlining, automatic switching on of driving lights, electronic brake force distribution (EBV), driving assistance system: breakdown management, windows for rear doors, window in the cargo/passenger compartment: - fixed, rear left, window in the cargo/passenger compartment: - fixed, rear right, heated rear window, body/structure: combi high-roof standard, comfort chassis, communication module (LTE) for digital services, fuel tank: main tank 71 liters, plastic floor in the cargo/passenger compartment, steering wheel (steering column mechanically adjustable), headlight range adjustment, Mercedes-Benz emergency call system, engine 2.0 liters - 110 kW CDI CAT, passenger car registration, wheelbase 3665 mm, interior mirror, low emissions according to emission standard Euro VI, sliding door cargo/passenger compartment right, safety belt system with warning system (passenger side), safety belt system with warning system (driver side), seat equipment: comfort headrest, driver's seat, steel rims 7x17, start/stop system engine, socket (12V connection) in the cargo/passenger compartment, all-round glazing, trim in the cargo/passenger compartment: wheel arch lining (plastic), trim in the cargo/passenger compartment: standard semi-high, fleece battery 92 Ah, warm air duct to the cargo/passenger compartment, heat protection glazing (windshield with band filter at the top), permissible total weight 3.50 t, auxiliary heating (air) electric VEHICLE IS LOCATED IN DRESDEN! The vehicle is located in our external storage facility, so please contact us to arrange a viewing. Thank you very much! Subject to price changes, typos and errors, and prior sale.

Condition: good (used), Year of construction: 2008, machine/vehicle number: 50028, functionality: fully functional, operating hours: 16,000 h, The machine has the following functions: 1. Pre-milling cutters. 2. All lamps are in working order. 3. One container. 4. It has saws that cut forward and backward. 5. It has milling cutters at the top and bottom. 6. It has a rounding cutter for shaping edges. 7. It has a cycling function for processing solid wood. 8. It has a cleaning unit. 9. It has two bottles for cleaning. Dodpfx Aiez H I H Hsljcn

Condition: used, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 450 mm, side roll diameter: 410 mm, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 40 mm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 50 mm, sheet thickness brass (max.): 50 mm, sheet thickness copper (max.): 50 mm, overall weight: 23,000 kg, input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, hardened rollers, Plate bending machine 3 ROLL HYDRAULIC MODEL 3000 X 40 MM - YEAR 1997 PLATE BENDING ROLL PLANETARY DESIGN PYRAMID DUAL PRE-PINCH Nameplate Bending capacity -Plate width : 3000 mm -Rolling plate thickness: 40 mm -Prebend thickness: 30 mm --- minimum rolling ID 550 mm depending on plate thickness and width Rolls dimensions: -Useful length 3100 mm -top roll D 450 mm -side rolls D 410 mm Accessories installed: Dcjdpfxoz H N Ifo Ailjn Central upper support hydraulic control to hold the plate formed into large diameters Side arm hydraulic to support the large diameter being formed Conical bending attachment with hydraulic control of the angle setting for cone rolling, cone bending stopper hardened pad swing-down on the drop-end of the machine. Technical data Rolls hardening induction treatment, high strength surface of the 3 rolls Power driven total on the 3 rolls with axial gearbox and direct drive hydro-motor each roll Console electric on wheels with centralized commands joysticks and digital readout. Digital readouts of the rolls position bending and pre-bending. Re-rolling system for welded shells rounding. Opening front side hydraulic drop-end to unload the closed shell. Variable speed working roll bending rotation hydraulic speed fast/slow. Voltage supply 3 phase Vac, electric power 40 Hp.

Condition: used, mileage: 323,040 km, power: 265 kW (360.30 HP), first registration: 01/2012, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 01/2027, color: yellow, gearing type: automatic, emission class: euro5, loading space length: 6,450 mm, loading space width: 2,500 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), MAN TGS 35.360-TRIDEM-LIFT AND STEERING AXLE-VARIOUS STORAGE COMPARTMENTS-ALL-ROUND LIGHTS-AUTOMATIC TRANSMISSION-DIFFERENTIAL LOCK-ENGINE BRAKE-IN EXCELLENT OPTICAL AND TECHNICAL CONDITION!!!, CRANE, FOLDABLE, MOUNTED BEHIND THE CAB, HIAB XS 144E3 HIDUO, REMOTE CONTROL, 3X HYDRAULIC OUTLETS AT 10M40/1240KGRS, 5/6 CONTROL CIRCUITS FOR GRAB AND ROTARY SERVO. SPECIAL BODY BEHIND THE CRANE: LOWER PART, 10,000-LITER WATER TANK WITH HYDRAULIC PUMP, PRESSURE/RETURN, HYDRAULIC WINCH AT THE REAR, 6M45X2M50X60CM-UPPER PART, OPEN PLATFORM WITH STEEL FLOOR AND LASHING POINTS, 6M45X2M50X40CM. EXTRA DIESEL TANK FOR SWITCHING TO RED DIESEL. Djdpfxoz H Trbj Ailecn SPECIALIZED VEHICLE!!!

Condition: ready for operation (used), Working width 3450 mm Working height 2000 mm Number of cylinders 5 St. loading dimensions L x W x H 3600 x 1200 x 2720 mm Hess "Multipress" Perforated Plate Press For all sloped, segmental, and round-arch windows and doors. Djdpfx Aowqr R Aeilscn Also for interior work or frame construction. For gluing staircase block joints and much more. Largest working area approx. 3450 x 2000 mm External dimensions approx. 3600 x 1200 x 2720 mm The vertical perforated plate press is constructed of heavy-duty, torsion-free steel. Thanks to its simple, robust, and economical design, it has a long service life. The perforated plate is made of 10 mm sheet steel with a 50 mm hole pattern. The pressure cylinders and abutments are self-locking. 5 plug-in hand hydraulic cylinders on a perforated plate with a built-in pump, 2000 kp pressure relief valve, 140 mm pressure plate width, 80 mm pressure plate depth, 60 mm cylinder stroke 4 fixed individual abutments (Technical specifications according to the manufacturer - no guarantee!)

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: BF15063528, Technical characteristics: Core Specifications: - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max. Feed Speed: 30 m/min - Max. Remnant Length: 300 mm - Required Air Pressure: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features: - Guide Channel: Manually interchangeable, made from Vulkollan-type plastic for high-speed bar rotation. - Front Steady Block: Interchangeable every 5 mm for optimal bar support. - Remnant Management: Rear extraction with self-centering extractor or front ejection. - Repositioning System: Optional rail allows axial or radial displacement up to 600 mm for lathe access. - Automation: Fully PLC controlled, with brushless motor and digital pneumatic valves for speed and thrust control. - Bar Storage: Single-level magazine, 235 mm capacity. Bar feeder details: TOP Automazione model: FU 352 Dcsdpfxoxx Si Es Ailsn Semi-automatic Bar Feeder for Horizontal Loading to Lathe (Autonomy depends on bar diameter) Dimensions: Bar feeder (L×W×H): 3500 × 800 × 1200 mm; Weight: 1200 kg Main Features and Capabilities: - Digital HMI controller for manual operations Machine status: - In working condition

Condition: used, Langarm-Drahtheftmaschine / Long arm Wire Stitching Machine Langarm-Drahtheftmaschine / Long arm Wire Stitching Machine Polygraph 781/1L50 FR Serial-No. 1793 Heftdicke / Staple thickness 0-8mm Heftarmlänge / Staple Arm length 50cm Heftarmbreite vorn / Handle width at the front 10mm Klammerrückenlänge innen / Bracket Back Length Inside 12mm Dodpfxjz H A Rys Ailecn Heftdraht Runddraht Nr. 21 - 23 / Flachdraht II - IV Staple Wire Round Wire No. 21 - 23 / Flat Wire II - IV Heftgeschwindigkeit 250 Klammern pro min / Stapling Speed 250 staples/min Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, mileage: 171,435 km, power: 346 kW (470.43 HP), first registration: 05/2022, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, total width: 2,550 mm, total height: 3,100 mm, Year of construction: 2022, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGS 26.470 6x2-4BL Hyva Roll-off Tipper VIN: P187910 Chassis / Components: * Leaf/air suspension * 3rd axle = lift/steer axle * Wheelbase: 1-2 = 4,500 mm / 2-3 = 1,350 mm * Tires: 315/80 R22.5 * Remaining tire tread: Axle 1: 60/80% / Axle 2: 90% / Axle 3: 90% * 1 x diesel tank * 1 x hydraulic tank Hyva * 1 x AdBlue tank Body: * Hyva hook 20-60-S * Load capacity 20,000 kg, max. pressure 300 bar * Weight of Hyva hook 2,650 kg * Hydraulic container locking * Underrun protection, mechanically extendable * 1 x storage basket Cab / Driver's Cab * TGS M cab * Roof hatch * Cab rear wall with window * Automatic climate control * Auxiliary heater * Hands-free system * Bluetooth, AUX, USB * Radio * Distance control * Lane assistant * Cruise control * Navigation Engine / Transmission * 346 kW / 470 hp // 12,419 cm³ // Euro 6e * ZF-TraXon / Automatic * ZF-Intarder * Differential lock Weights * Gross vehicle weight 26,000 kg * Payload 15,100 kg * Unladen weight 10,900 kg Other * German vehicle * 1 previous owner * New MOT possible upon request -- Valid until 09/2026 New main inspections / safety checks or weight reductions/increases are possible upon request. We will be happy to assist you with obtaining export/transfer license plates. We can also arrange for the transport of your purchased vehicles within Germany. Contact us! We speak the following languages: German, English and Russian! No liability for printing & typographical errors, changes, prior sale and errors reserved! Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the field of refurbishment and sale of commercial vehicles, we are a reliable partner for customers worldwide. The special strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. On 11,000 m², you will find a wide variety of vehicles. Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. See for yourself! Our service for you: Loading of vehicles Dodpfxey Acbpe Ailjcn We will be happy to help you load your purchased vehicles. Organization of special transports We will be happy to help you organize special transports. Daily license plates / export license plates We will be happy to help you obtain export license plates / short-term license plates. Handling of customs formalities We will be happy to assist you with customs matters.

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 480 mm 610 x 450 saw band length 5320 x 34 x 1,1 mm band speed 15 - 100 m/min table height 820 mm total power requirement 3,0 kW weight of the machine ca. 2,3 t dimensions of the machine ca. 2,65 x 2,8 x 2,2 m For miter cuts up to 45° left in fully automatic Operation and up to 60° left in semi-automatic operation Material height sensor (automatic cut start detection) Automatic feed unit via ball screw with incremental feed automatic length compensation Button on the saw band for automatic adjustment of the saw stroke Fully automatic control of the saw frame and clamping device Hydraulic unit with automatic pressure shut-off when idling Mechanical chip clearing brush feed vice opening on both sides Remaining piece length 100 mm Modern CNC control freely programmable for multiple sawing jobs with various Cutting lengths and quantities. Automatic feed unit 500 mm via ball screw incremental feed with Dcedpofu Nbbofx Ailon automatic length compensation. Adjustable for section lengths of 25 – 9,999mm. Fully hydraulic control of saw frames and clamping devices Preselection of 3 different material feed speeds Visualization of the entire workflow with simple data entry

Condition: new, capacity 90 degrees: round 105 mm Dcjdpfx Aiofv Aq Rslen capacity 90 degrees: square 100 mm 100 x 105 dimensions of saw-band 1335 x 13 x 0,65 mm dimensions 650 x 310 x 300 m band speed 30 - 80 m/min total power requirement 0,95 kW weight of the machine ca. 18 kg Action Price!! Berg & Schmid - assembly band saw PBS 90 ESC Powerful and particularly robust metal band saw with Die-cast aluminum saw table and stepless cutting speed for Miter cuts up to 60° Share of freight costs: EUR 25.

Condition: used, saw blade diameter 400 mm Dsdpfjd Iinxjx Ailocn capacity 90 degrees: round 110 mm capacity 90 degrees: square 100 mm capacity 90 degrees: flat 200x60 mm capacity 45 degrees: round 100 mm capacity 45 degrees: square 100 mm capacity 45 degrees: square 140x60 mm total power requirement 1,5 kW weight of the machine ca. 130 t dimensions 0,8 x 0,7 x 1,3 m SPECIAL PRICE!! Underfloor aluminum circular saw, hydropneumatic semi-automatic. · Maintenance unit for pneumatic control · Turntable with ball bearings · Suction nozzle for chip extraction system · 2 pneumatic vertical clamps · Rotation range 180° · Movable rear material stop = enlargeable cutting area · Saw blade feed continuously adjustable · Two-hand safety control Horizontal vices (option) · Mist spray device for cooling emulsion · Engine braking · Machine base · The use of our B & S Coolmatic Plus is mandatory for profile cuts necessary . Optional saw blade

Condition: new, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 100 mm 180x100 mm Working height 925 mm saw blade turning speeds 15+30 oder 30+60 U/min total power requirement 1,8/2,2 kW weight of the machine ca. 0,44 t dimensions of the machine ca. 0,8 x 1,1 x 2,1 m SPECIAL PRICE!!! High-performance vertical circular saw Hydropneumatic semi-automatic. (20185/ 20188) · miter left 60° + right 45° · Vice with double clamping arm · Robust prism guide of the saw head, adjustable dovetail guide. · Chip brush · Automatic cooling · Metal tension wheel for high power transmission c. Dedpod Iin Ijfx Ailocn · Solid, strong cast iron table Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the beginning of the material or cut the same for series cutting 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise MPS control: · Save cut start/end · Display of current consumption, number of pieces, cutting time... · Adjustable water cooling · Cutting pressure regulator ATTENTION: Price is without saw blade!!! (saw blade price EUR 204)

Condition: new, saw blade diameter 315 mm capacity 90 degrees: round 108 mm capacity 90 degrees: square 93 mm 150 x 90 mm Working height 920 mm saw blade turning speeds 17+33 oder 33+66 U/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,36 t dimensions of the machine ca. 0,8x0,9x1,95 m SPECIAL PRICE!!! High-performance vertical circular saw VKS 315 HA (20154/20155) • miter left 60° + right 45° • Vice with double clamping arm (fixed 4 times) for low-burr cuts and lateral quick shift • Saw table with large rotating plate and particularly stable vice for optimal material tension • Robust prism guide of the saw head (dovetail guide adjustable) • Automatic cooling • Machine base with chip drawer • Metal handle for high clamping force • Spring package Semi-automatic function: 1. Saw starts 2. Clamp material 3. Rapid lowering to the beginning of the material Dcjdpfjd Iin Rex Ailon or cut the same for series cutting 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise ATTENTION: Price is without saw blade!!! (saw blade price EUR 109)

Condition: new, weight max. in kg 2500 kg fork length 800 mm stroke height min 85, max 200 mm 155 mm length in width 540 mm number of wheels 2 vorne, 2 hinten tire equipment PU/Pu fork arm (length x width x thickness) 800 x 155 x 50 mm weight of the machine ca. 0,059 t dimensions 1,15 x 0,54 x 1,21 m SPECIAL PRICE !!! - metered lowering of heavy loads - low maintenance hydraulic unit in steel version - Rounded fork tips for more safety when entering the pallet - Hard chromed piston rod and overload valve - Steering and load rollers ball bearings, for easy running even under load Djdpfefgyhqex Ailecn

Condition: new, capacity 90 degrees: round 172 mm capacity 90 degrees: square 170 mm 170 x 170 dimensions of saw-band 2035 x 20 x 0,9 mm dimensions 430 x 960 x 520 m Dsdpjfgyhzofx Ailscn band speed 30 - 80 m/min total power requirement 1,5 kW weight of the machine ca. 38 kg SPECIAL PRICE!! Berg & Schmid - Assembly band saw PBS 171 ESC Powerful and particularly robust metal band saw Aluminum die-cast saw table and infinitely variable cutting speed for Miter cuts up to 60° Optional: machine base type 20508

Condition: new, cutting diameter 220 mm saw band length 2450 x 27 x 0,9 mm table height 915 mm band speed 35 + 70 m/min connected load frequency 400 V capacity 90 degrees: round 220 mm capacity 90 degrees: square 210 x 210 mm capacity 90 degrees: flat 230 x 185 mm total power requirement 1,2 kW weight of the machine ca. 240 kg dimensions of the machine ca. 870 x 1550 x 1740 mm The Zimmer Z241/R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After the cut, the machine stays through one Safety limit switches stand. The reduction is infinitely variable Hydraulic system adjustable. The saw arm can be raised after the cut any position. The saw arm remains at the desired position stand. Dcsdpfx Asfgyh Noilen The Z241 / R has the following features: Hydraulic cylinder, emulsion pump, eccentric tensioner, base, saw band, 400V Connector -16A- The machine is completely assembled and delivered ready for use.

Condition: used, mileage: 13,487 km, power: 160 kW (217.54 HP), first registration: 08/2010, fuel type: diesel, overall weight: 12,500 kg, axle configuration: 2 axles, color: green, gearing type: automatic, emission class: euro5, total length: 6,390 mm, total width: 2,420 mm, total height: 3,100 mm, loading space length: 2,961 mm, loading space width: 2,385 mm, loading space height: 1,685 mm, Equipment: all wheel drive, Errors and prior sale excepted! Internal number: 1111. V224078 ----EQUIPMENT * Paint finish 2 6431 bronze green, matte, CARC/IR paint * Lights HELLA/VIGNA+ * Trailer coupling RINGFEDER * Windshield wipers * Heater SOFICA * Rims LEMMERZ * A99 push rod control for long wheelbase * B28 Mech. quick-release device for spring accumulator cylinder * B42 Trailer brake system, two-line * B56 Compressed air filling connection, front * B68 Brake connection, front, left * C04 Chassis parts lowered for superstructures * C34 Anti-slip coating on bumper * C67 Fuel tank enlarged * C75 Protection for tilting hinges, cab * C87 Exhaust pipe pointing upwards * D65 Fastening parts for external superstructures * E11 Electrical system 24V, with camouflage lighting system Dsdjz Emrxopfx Ailjcn * E22 Extendable battery box slide * E33 Battery main switch on the battery box * E35 Circuit breaker * E40 ABS trailer socket 24V, 7-pin / 5-pin * E41 Trailer socket 24V, 12-pin * E43 Trailer socket 24V, 7-pin * E44 Socket for external starting * E48 Power supply and warning system (cab-platform) * E52 Antenna cable, power supply for radio * E55 Pre-installation, wiring/antenna, for radio * E57 Socket front and rear, 2-pole * E58 Socket 7-pin, for reversing lights * E59 Socket 6-pin, for battery maintenance * E69 Reading light * E73 Gel batteries, 2x 12V / 100 Ah, maintenance-free * F09 Cab, large, 120mm extended / 120mm raised * F21 Round roof hatch, swiveling * F22 Base carrier for roof structure * F43 Auxiliary heater with engine preheating * F56 Integrated air conditioning * F60 Raising device for cab * F64 Tilting hinges for cab * F78 Painted bare parts * G50 Transmission oil cooler * J28 Tachograph, digital, with additional writing function * JY2 Deactivation warning message missing driver card * JZ1 Tachograph manufacturer Siemens VDO * L02 Outline lights to the front, white * L18 Fog lights, halogen, suitable for wading * L30 Stone guard grille for headlights * L32 Stone guard grille, metal, for turn signals * L35 Headlight beam adjustment * L71 Side marker lights with integrated reflectors * M55 Fuel preheating, with water separator * M89 Intake air preheating for cold start * MQ4 MB 4-cylinder diesel engine OM924LA, 160KW(218PS) * MS5 Engine version Euro V * Q11 Hook trailer coupling, Ringfeder Ruwg K.D * Q32 Rear crossmember for increased trailer load * R30 Semi-lowbed rims 11-20 SDC * S02 Air-suspended driver's seat * S10 Air-suspended passenger seat * S19 Seat cover, imitation leather * S41 Storage compartment behind the passenger seat backrest * S51 Holder for first-aid kit * S56 Cab rear wall without window * S59 Power windows, electric, left and right * S77 Transport holder for a G36 rifle, right side * S78 Transport holder for a G36 rifle, left side * S81 Mirror holder widened * T08 Spare wheel holder * T30 1 spare rim 11x20 SDC * W60 German as language * X39 Lubrication chart, German * Y18 Fire extinguisher with holder * Y31 Tire filling hose with pressure gauge * Y36 Flag holder, left * Y37 Holder for traffic wand * Y38 Glare protection for glazing * Y46 Warning triangle and warning light * Y48 External starting connection cable 6m * Y67 Color control for second paint (paint additive) * Y68 Color control, paint version, cab in 2K * Y69 Painting of aggregates in 2K (LZ52) * Z01 Vehicle with left-hand drive * Z16 Special parts, suitable for wading * Z39 Lashing and loading eyes * Z48 Special parts, German Bundeswehr * Z66 Reduction of wading depth from 1200mm to 1000mm