Used Robatech Roba 40 Nozzle Glue System for sale (56,428)

Condition: excellent (used), Year of construction: 2022, operating hours: 3,600 h, functionality: fully functional, Description: Like-new welding cell including bolt-setting equipment with only 3600 operating hours, consisting of: Robot Qirox QRC 350, QC2 control system including connection cable, programming handheld device, gas nozzle sensor, arc welding search, point editor, QWP, QTI, Manax, hard drive, center-based circular programming Base stand Welding machine Qineo Next 452 Motion, wire feeder, welding torch, torch testing gauge, hose package, mechanical cleaning, 1 light curtain, start pre-selection, safety grid in the insertion area, service door with limit switch protection 1 manipulator QR-WP-TC 2.5 KN for components up to Ø 800 mm, plate distance 2000 mm and a load capacity of 250 kg. 1 extraction hood including hose lines without filter unit 1 Bolte bolt-setting device complete Automatic changeover system between bolt-setting head and welding torch Documentation, manufacturer's declaration Accessories: Lrodpfx Afozvm Ans Sot Functional guarantee. Services available upon request. Delivery date: possible in the short term. Subject to prior sale. The system can be inspected under power near Siegen. Special price if dismantled by the end of September 2026!

Condition: good (used), Year of construction: 1989, functionality: fully functional, Robust BÜRKLE multi-layer press / veneer press with two pressing levels and electrically heated press plates. The separate control of the heating plates allows the temperatures to be adjusted according to the specific application. The press is suitable, among other things, for veneering, gluing, and coating wood-based materials. The middle heating plate can be heated up to approximately 50 °C, and the maximum temperature of the other heating plates is approximately 100 °C. Technical data Year of manufacture: 1989 Pressing area: approx. 1,200 × 800 mm Opening: approx. 385 mm Pressing pressure: approx. 40 N/cm² Number of pressing levels: 2 Number of press plates: 3 Heating: electric Max. temperature: approx. 100 °C Middle heating plate: up to approx. 50 °C Heating plates can be controlled separately Equipment 2 pressing levels 3 heating plates electric plate heating separate heating plate control hydraulic pressing system massive steel construction The machine is still at the previous owner's location but would be immediately available. The press can be inspected and tested under power after scheduling an appointment. Ledpjz Dfzvefx Af Sert Transportation is possible for an extra charge! Note The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes are subject to confirmation. All information without guarantee.

Condition: used, Year of construction: 2017, Name: Used chamber filter press Manufacturer: JKF Kübler Type: KFP 800-40-25K-OA-AU/LG-2 Year built: 2017 Construction form: Side beam press Press content: 470 Liters Lredpfsx Swp Hsx Af Set Cycle: Open Filter area: 41,7 m2 Plate size: 800 x 800 mm Number plates: 41 Plate material: Polypropylene Plate transport: Automatically Cake thickness: 25 mm Closing pressure: 360 bar Dimensions: L 4303 x W 1700 x H 2110 mm Empty weight: 4830 kg Technical doc.: Yes Message: It was used in electroplating. Accessories: A switch cabinet, a control cabinet, a hydraulic system, piston pump, a drip tray. Condition: Second hand Price: By request

Condition: used, Year of construction: 1992, functionality: fully functional, power: 2,500 kW (3,399.05 HP), input voltage: 380 V, input current: 53 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 250 t, table length: 4,050 mm, year of last overhaul: 2007, Equipment: documentation/manual, We are offering this used Eisen u. Hammerwerk GmbH - EHT EHPS 25-40 press brake (hydraulic press brake, die bending press) for sale. Available immediately. Ready for operation. For sale due to new acquisition. Specifications: - 250 t pressing force - Cybelec DNC880S CNC control with Windows operating system (retrofitted in 2007) - Foot pedal control - Various upper tools in different lengths (segmented) - Lower tool (reversible die) in various lengths (segmented) - Hydraulic tool clamping - Support table for bent parts Technical data: - Machine type: EHPS 25-40 - Force: 2500 kN - Year of manufacture: 1992 - Working length: 4050 mm - Serial number: 207380 - Power supply: 3~ - Frequency: 50 Hz - Operating voltage: 380 V - Control voltage: 24/220 V - Rated current: 53 A Lrsdpoy D Sy Refx Af Sot - Main fuse rated current: 80 A - Circuit diagram number: 209-178/372 If you have any questions or require more information, feel free to send us a message or give us a call. Machine location at our premises: Pavic Fahrzeugtechnik Homberg GmbH Poschweg 2 34576 Homberg Relbehausen Germany This is a non-binding offer. Subject to prior sale, errors and changes excepted.

Condition: as good as new (ex-display), Year of construction: 2025, Special price *available upon request Lodpjd Su Hxefx Af Sert New: With the frequency converter option, up to 45% state funding is possible. Combination of: mütek briquetting press MPP 60 + extraction unit MMJET 350 *Approved for indoor installation *Both individual machines are fully manufactured and in stock; they only need to be connected to each other 1. Technical data of briquetting press: Our best-selling briquetting press, a classic. + Proven, simple technology for extremely low failure rates + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Commodity code: 84793010 Briquette diameter: 50 mm Front bushing: 50 mm Briquette stroke max.: 40 mm Briquette stroke opt.: 40 mm Throughput (material-dependent): up to 60 kg/h* *depending on the bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW, 400 volts / 50 Hz / 3-phase Overall dimensions of the system: 2.2 x 1.1 x 2.8 m (L x W x H) Height - 2.8 m (special container) Delivery in 2 components possible Weight: approx. 1200 kg Oil quantity: 110 liters Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compressor Option cooling press clamp: no Option cooling hydraulic oil: yes Option level monitoring: yes CE compliant 2. Technical data of clean air extraction unit MMJET 350: Extraction port diameter: 350 mm Motor: 11 kW Extraction nozzle on the left (when standing in front of the dust bin) Residual dust content:

Condition: used, Year of construction: 2022, functionality: fully functional, input voltage: 230 V, total width: 996 mm, total length: 1,311 mm, total height: 2,633 mm, overall weight: 250 kg, input frequency: 50 Hz, Equipment: documentation/manual, The InspecVision Planar P70.20 is a high-speed, non-contact 2D optical measurement and reverse-engineering system. Machine type: 2D optical inspection and measurement system Maximum part length: 1,000 mm Maximum part width: 667 mm Maximum part thickness/height: Up to 350 mm* Maximum part weight: 50 kg, evenly distributed Measurement accuracy – length/width: ±20 / ±40 µm Point spacing / resolution: 0.18 mm Measurement speed: Less than 0.25 seconds SurfScan resolution: 0.15 mm Ljdpezvxg Eofx Af Sjrt Camera: High-resolution industrial camera Lighting: LED Software: InspecVision inspection, SPC, reporting, and reverse-engineering software CAD comparison: DXF comparison and dimensional inspection Reverse engineering: Available Power supply: 230 V, single phase, 50 Hz Maximum power consumption: Approx. 4 A Operating temperature: 10–30 °C Computer interface: USB 2.0 / USB 3.0 Approximate machine dimensions (W × D × H): 1,311 × 996 × 2,633 mm Machine weight: Less than 250 kg

Condition: used, Year of construction: 1984, functionality: fully functional, machine/vehicle number: 02.086.00, pressing force: 40 t, For sale is a try-out press (spotting press) from manufacturer REIS with a maximum pressing force of 40 t. The machine features a table size of 1,280 × 900 mm, a maximum installation height of 1,035 mm, and a stroke up to 1,100 mm, making it suitable for spotting, adjustment operations, and tool modifications in mould and tool making. ##### Technical Data & Information: Spotting Press – 40 t – 1,280 × 900 mm ==== General Details - Design: 4-column press - Manufacturer: REIS - Year of manufacture: 1984 - Press force: 40 t (adjustable) - Return force: 20 t - Distance between columns: 930 × 705 mm - Max. installation height: 1,035 mm - Table size: 1,280 × 900 mm - Overall dimensions (W x D x H): approx. 3,800 × 1,850 × 3,600 mm - Total weight: approx. 9,000 kg - T-slots: DIN 650 – 18 mm ==== Hydraulic Cylinder - Stroke: 0–1,100 mm (adjustable) - Cylinder diameter: Ø 160 mm ==== Hydraulic System & Drive - Flow rate: 24 l/min - Operating pressure: 200 bar - Motor power: 9.5 kW ==== Movement System - Ram swivel unit: approx. 175° - Extendable table: yes - Table ejector: available ==== Controls - Operation: Control panel - Additional function control: Oil ports for core pulls (2 units) ==== Safety - Mechanical anti-drop protection ==== Electrical Connection - Main supply: 400 V AC - Fuse protection: 35 A Ledpfx Afsy Ec H Rj Ssrt - Frequency: 50 Hz - Connected load main motor: 9.5 kW ##### Areas of application: spotting, adjustment, toolmaking, mould making, plastics engineering, automotive, maintenance (spotting press, try-out press, test press, hydraulic press, 40 t press, 40 tonne press, 4-column press, tool adjustment press, tryout press, tool try-out press) Are you looking for a hydraulic press tailored to your specific application? Contact us for a customised quotation. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed Canadian and European safety requirements as they fully comply with the national Brazilian safety guideline NR 12, which builds on these standards. Our core strength lies in custom machine construction and press automation. We supply bespoke hydraulic presses at surprisingly affordable prices. The hydraulic systems of our presses predominantly utilise components from leading European manufacturers.

Year of construction: 2023, condition: new, functionality: fully functional, Containerized Pure H2 Production System, capacity 45 Nm3/h Composition of H2 Production System: - 40' Double Door Container - H2 generator mod 33.0 single cell (capacity 22.0 Nm3/h) and H2 generator mod 35.0 single cell (capacity 23.2 Nm3/h) - 2x Demineralizers OSMODEMI30 H2 Generator mod 33.0 single cell Standard H2 Production: 22.0 Nm3/h - Max flow 24 Nm3/h H2 Purity: 99.5% Max oxygen content (O2 in H2): 0.5% Pressure: 5 bar g Electrical voltage: 400Vac 3 ph 50 Hz Ljdpfjxfvnfsx Af Sjrt Max electrical consumption: 119 kW (at max H2 production) Max demineralized water consumption: 18 l/h (at max H2 production) Max demineralized water conductivity:

Condition: like new (used), Year of construction: 2020, operating hours: 250 h, functionality: fully functional, 1.1 TECHNICAL DATA Ledpfx Afjxgua Ao Sort 1 x Waterjet cutting machine, NCP 4020 D 1 x FANUC 31iB d 1 x IGEMS Professional 1 x BevelJet cutting heads for AWJ abrasive waterjet cutting 1 x Fixed cutting heads for AWJ abrasive waterjet cutting 2 x SM3000 feed systems 1 x KMT, Jetline 50 HP, 3.8 l/min, 4100 bar 1 x Cooling unit control cabinet 1 x Hose reel with spray nozzle 1 x Tool kit 1 x Machine zone safety guard 1 x PanelOne HMI operator interface "EDGECUT" 1 x Remote control for high-pressure pump 1 x Remote maintenance system 2 x Diaphragm pumps and 2 x extraction units 1 x Waste container 1000 l 1 x Pressure vessel 200 l or 2-ton abrasive online conveyor/online abrasive hopper 1 x Head protection package (zero-point measurement head 1) 1 x IGEMS 5X CAM 1 x MPG, portable handheld pendant 1 x Rotary unit SS (chuck 240 mm) Price €21,000 1.1.1 MACHINE DATA Table size (W x D): 4200 x 2275 mm - Machining area (W x D): 3980 x 2010 mm - X-axis travel 2D: 3530 mm - X-axis travel 3D: 3220 mm - Y-axis travel 2D: 2010 mm - Y-axis travel 3D: 1405 mm - Z-axis travel: 250 mm - Positioning accuracy (X/Y): +/- 0.050 mm/m - Repeatability (X/Y): +/- 0.025 mm - Rapid traverse (X-axis): 30,000 mm/min - Rapid traverse (Y): 15,000 mm/min - Rapid traverse (Z): 5,000 mm/min - Minimum distance between nozzles: 450 mm - Maximum distance between nozzles: 2,010 mm 1.2 CONNECTION DATA 1.2.1 MACHINE CONNECTION • Electrical connection: 3 x 400 V+PE, 16 A, 50 Hz • Pneumatic supply volume (incl. pressure vessel): 500 l/min • Pneumatic supply pressure: min. 6.5 bar 1.2.2 HP PUMP DATA/CONNECTION HP pump data: - KMT 50, Jetline, 4100 bar - 37 kW, circuit breaker at 400/50 Hz, 80 A CAD/CAM software: - IGEMS Professional

Condition: used, Year of construction: 2018, Manufacturer: ONI, Year of manufacture: 2018, Serial no. 181626, Container dimensions: 8,000 x 3,000 x 3,000 mm, 3 pumps, Manufacturer: KSB, Type: ETB (heat recovery/hydraulic cooling/free cooling), Free cooler 500 kW (roof-mounted), 10 fans with adiabatic cooling, L/W/H 9,930 x 2,290 x 1,510 mm, Water treatment system with plastic tank 2 x 3,000 liters, Water softener, 7 heat recovery units, Type SW25, Heating capacity 25 kW, Air volume flow 6,000 m³/h, 4 with door air curtain nozzles, 2 air heaters, Type SW1 (office area), Pump and valve group for heat recovery circuit, Heating element, 200 W, System control: Siemens Simatic S7, Touch panel HMI Ledpfjzn Atajx Af Sort +++ Attention: This system is part of an online auction! +++

Year of construction: 2020, condition: excellent (used), functionality: fully functional, Graco Tank-Free Hotmelt Delivery System Invisipac HM 25 Lodswigbmspfx Af Sert Year 2020 For delivering and dispensing hot melt adhesive pellets. For professional use only. 1200 psi (8.3 MPa, 83 bar) Maximum Working Pressure 400°F (204°C) Maximum Fluid Operating Temperature 100 psi (0.7 MPa, 7 bar) Maximum Air Inlet Pressure Proven adhesive savings, unsurpassed reliability. Unlike conventional tanks and many "tankless" systems, the InvisiPac system's patented Melt-on-Demand technology ensures a constant flow of adhesive that melts quickly and is dispensed instantly. You save adhesive and costs due to unplanned downtime for maintenance. With the InvisiPac system's robust reporting capabilities, you have the data you need to make smart decisions for your line that can increase efficiency, reduce costs, minimize downtime, and improve productivity. Better performance: No clogged nozzles; No carbon-filled containers; Fast startup in as little as 10 minutes; Improved operator safety; High performance with a sustainable component; Greater cost savings; Consistent adhesive viscosity; No material damage; Little to no waste; Better dispensing control; Use the adhesive of your choice

Condition: new, Year of construction: 2024, functionality: fully functional, - FAGOR 3-axis position indicator, Mod.: 400iB INNOVA - Milling head +- 90° manually swiveling - Manual tool clamping using M 16 tightening screw for vertical and horizontal spindle - Swiveling control panel - Motor for horizontal and vertical spindle - Feed motors with inverter for X/Y/Z axis - Ball screw spindles in the X/Y/Z axes - Gearbox for 12 spindle speeds - Counterholder with support bearing - 1 long milling mandrel 27 mm - 3 reducing sleeves (MK1, MK2, MK3) - Spindle protection with safety switch - Splash protection on the 3 sides of the horizontal table - LED work light - Automatic lubrication for X/Y/Z guides - Mechanical handwheels for X/Y/Z axes - Coolant system - Cover for X/Z axes - Operating tool - Technical Documentation - CE version Colors: - RAL 7024 – graphite gray - RAL 7035 – light gray Technical data: Ledpovt Tn Aofx Af Sert Fixed angle table: - Dimensions of the work surface: 845 x 390 mm - T-slots: number / width x distance: 5 pcs. / 14 x 63 mm - Max. table load: 250 kg Vertical table: - Dimensions of the work surface: 950 x 250 mm - T-slots: number / width x distance: 3 pcs. / 14 x 63 mm Travel paths: - Axis travel paths: automatic/manual - Longitudinal (X): 420 mm - Transverse (Y): 220 mm - Vertical (Z): 380 mm Vertical milling head: - Tool holder: ISO 40 / DIN 2080 - Speed range: 65 - 2,600 rpm. - Number of spindle speeds: 12 (65 – 100 – 130 – 175 – 260 – 357 – 485 - 690 – 950 – 1,325 – 1,870 – 2,600) - Quill stroke, manual: 100 mm - Head swivel: +- 90° - Distance spindle nose/table: 90 - 470 mm - Distance spindle center to column - min./max.: 120 - 340 mm Horizontal spindle: - Tool holder: ISO 40 / DIN 2080 - Gear stages: 12 - Speed range: 65 - 2,600 rpm. - Distance spindle center / table: 100 - 480 mm Feeds: - Control: stepless - Range (X,Y,Z): 0 - 1,000 mm/min. - Rapid traverse (X,Y,Z axes): 1,000 mm/min. Motors: - Main drive power: 2.2 kW - Feed motor power (X-Y-Z): 0.35 kW - Coolant pump: 0.09 kW Dimensions and weight - Dimensions (W x D x H): 1,621 x 1,527 x 1,938 mm - Weight: 1,300 kg

Condition: used, axle configuration: 1 axle, permissible axle load (axle 1): 10,000 kg, first registration: 01/2005, total length: 12,300 mm, total width: 2,550 mm, wheelbase: 7,900 mm, Year of construction: 2005, Rear axle: Double wheels; Max. axle load: 10000 kg; Steering; Tyre profile left inner: 80%; Tyre profile left outer: 80%; Tyre profile right outer: 80%; Tyre profile right outer: 80% Empty weight: 10.480 kg Ljdpfjz D U Tbex Af Sert Carrying capacity: 8.520 kg GVW: 19.000 kg APK (MOT): tested until 05/2027 Registration number: OH51TV0 Liborary, race, camper trailer In combintation MAN TGL 15.290 Year 2019 Steering axcle Self support, battery sets Disabled lift Set price 39.500,-- euro netto

Condition: good (used), Technical data for the pallet racking system: Racking system: Arestant Type: AS Technical data for the installation: Number of racking rows: 01 unit Length per racking row: 19,575 mm Number of bays per racking row: 07 units Number of levels including base level: 04 units Technical data for the volume: Pallet spaces per bay: 12 units Pallet spaces per racking row: 84 units Total pallet spaces: 84 units Based on: Load support: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height including pallet: n.a. Weight per pallet (max.): 400 kg Included in the scope of delivery: 08x Pallet racking uprights, used Material color: blue Frame profile: 8808 Profile dimensions: 80 x 80 x 1.50 mm Grid hole spacing: 50/50 mm Including cross and diagonal braces, Base plates The uprights are pre-assembled (bolted truss) Height: 5,000 mm Depth: 1,100 mm 42x Pallet racking beams, used Material color: orange Box profile: 80 x 40 mm Hook: 4 HK Clear width: 2,705 mm Design: Head beam Max. load per beam pair: 1,200 kg, with evenly distributed load. (Observe bay load) 84x Locking pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting 32x Bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 16x Shims, used Design: fully galvanized For leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and shelf loads, manufacturer and batch number Lrodpfx Ajz A Dzfef Sot Dimensions: 420 x 297 x 3 mm Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for pick-up only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: excellent (used), Overview The Single Head Wire Stitching Machine is a versatile and reliable solution for wire stitching applications, suitable for both pads and brochures. Designed for consistent performance in print finishing environments, it offers the flexibility to handle standard and loop stitching with ease. Built with a robust and durable construction, this machine is well suited to long production runs while maintaining accuracy and stability. The adjustable working table allows quick changeover between saddle stitching for brochures and flat stitching for pads, making it ideal for varied workloads. An advanced wire feed system ensures smooth and precise stitching, even when working with thicker or digitally printed materials, providing consistent results across a wide range of stock types. Optional loop stitching conversion parts are available, allowing the machine to be adapted quickly to suit different production requirements. Key Features Supports both standard and loop stitching for pads and brochures Ledpfx Asyyb Rdef Ssrt Heavy-duty construction for reliable, long-term operation 25mm stitch and 40mm stab capacities Adjustable table for saddle or flat stitching configurations Maximum speed of up to 203 staples per minute Table size: 700 × 240 mm Patented wire feed and cutting system for accurate, consistent stitching Suitable for thicker and digitally printed materials Optional loop stitching conversion kit available for added flexibility Why Choose the Hohner Economy 25/40 Ideal for print shops requiring a flexible stitching solution for multiple applications Simple changeover between different stitching styles reduces downtime Capable of handling a wide range of materials, including heavier stocks Reliable and durable design suited to regular production use Cost-effective alternative to larger multi-head stitching systems Optional loop stitching capability adds value and expands service offering Specifications Manufacturer Hohner Model Hohner Economy 25/40 Condition Used Mechanic cycles per minute [staples] 203 Clinched staple 25mm Capacity Stabbed from both sides 40mm Capacity Stitching table size [mm] 700 x 240 Working height [mm] 880 Throat depth from clincher box to machine body [mm] for pad stitching 95 Throat depth from clincher box to machine body [mm] for saddle stitching 290 Maximum number of stitching heads 1 Crown width [mm] 14 Round wire (standard) No. 21 – 30 Flat wire 0,70 x 0,35 mm – 0,90 x 0,78 mm Electric requirement 230/400V Single or 3phase Net weight [kg] 200 Dimensions (L)900mm x (W)700mm x (H)1540mm

Condition: ready for operation (used), Year of construction: 2017, pressing force: 41 t, stroke length: 200 mm, overall weight: 4,000 kg, Press brake manufactured in 2017. This Bystronic Xpert 40/1030 features a press force of 400 kN and a bending length of 1030 mm. It includes a ByVision Bending control system and a 6-axis backgauge for enhanced precision. If you are looking to get high-quality bending capabilities, consider the Bystronic Xpert 40/1030 machine we have for sale. Contact us for further details. • Control: ByVision Bending • Backgauge: 6-axis • Interface: OPC • Oil cooling system • Safety system: Fast Bend G2 • Electrical: 3-phase 400V / 50 Hz • Main motor power: 7.5 kW • Made in Germany • The PLC Runtime is 1812 hours • The Robot Runtime is 140 hours. Lodpfey Tw R Tox Af Sort Additional equipment • Bystronic Mobile Bending Robot (Integrated robotic bending cell) • Year of manufacture: 2017 • Electrical: 3-phase 400V / 50 Hz • Power consumption: 3 kW • Pneumatic pressure max: 8 bar • Weight: approx. 1000 kg LIST OF TOOLS Bystronic V10S/30° – 350 kN/m – R=1 mm – H=55 mm – L=300 mmBystronic V10S/30° – 350 kN/m – R=1 mm – H=55 mm – L=275 mmBystronic V10S/30° – 350 kN/m – R=1 mm – H=55 mm – L=200 mmBystronic V10S/30° – 350 kN/m – R=1 mm – H=55 mm – L=100 mmBystronic V10S/30° – 350 kN/m – R=1 mm – H=55 mm – L=50 mmBystronic V10S/30° – 350 kN/m – R=1 mm – H=55 mm – L=30 mmBystronic V10S/30° – 350 kN/m – R=1 mm – H=55 mm – L=20 mmBystronic V10S/30° – 350 kN/m – R=1 mm – H=55 mm – L=15 mmBystronic V10S/30° – 350 kN/m – R=1 mm – H=55 mm – L=10 mmBystronic P5RFA/30° – 750 kN/m – R=1 mm – H=250 mm – L=275 mmBystronic P5RFA/30° – 750 kN/m – R=1 mm – H=250 mm – L=200 mmBystronic P5RFA/30° – 750 kN/m – R=1 mm – H=250 mm – L=100 mmBystronic P5RFA/30° Left Angle – 750 kN/m – R=1 mm – H=250 mm – L=100 mmBystronic P5RFA/30° Right Angle – 750 kN/m – R=1 mm – H=250 mm – L=100 mmBystronic P5RFA/30° – 750 kN/m – R=1 mm – H=250 mm – L=50 mmBystronic P5RFA/30° – 750 kN/m – R=1 mm – H=250 mm – L=30 mmBystronic P5RFA/30° – 750 kN/m – R=1 mm – H=250 mm – L=20 mmBystronic P5RFA/30° – 750 kN/m – R=1 mm – H=250 mm – L=15 mmBystronic P5RFA/30° – 750 kN/m – R=1 mm – H=250 mm – L=15 mm Technical Specification Bending Length 1030 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2004, operating hours: 9,495 h, load capacity: 6,000 kg, lifting height: 4,000 mm, free lift: 325 mm, fuel type: diesel, construction height: 2,900 mm, motor manufacturer: Perkins, Equipment: cabin, lighting, Diesel Sideloader JUMBO J/SHP60/15/40 Year of manufacture: 2004 According to hour meter: 9,495 hours Perkins engine 6 ton lifting capacity 4 metre lift height Lodpfjyk Tc Sox Af Sert 2.90 metre overall height 1.50 metre fork length - Full cab with heating and radio - Lighting system - Immediately operational! - MADE IN AUSTRIA! Sale price: €13,500 net Low-cost delivery available!

Condition: used, functionality: fully functional, Complete smoking system for butcher shops/food processing, supplied as a set – ready for operation and including all accessories for immediate use. Scope of delivery: • 1 × L'Unité Stein RAKO 3001 smoking cabinet (used) • 1 × Tecumseh Silensys H84Z refrigeration unit • 1 × Stein RRT M exhaust system (for V21 smoking cabinet), including stainless steel pipe, 30 linear meters, Ø 20 cm • 407 pieces of knot-free beech smoking wood (8 × 6 × 40 cm) Lredpsza Ah Nofx Af Sst Condition: • Used, well-maintained • Regularly serviced • Operating log available Location: Selters. Collection or transport from the location is possible. Further photos and details available upon request. Technical data: Smoking cabinet: L'Unité Stein RAKO 3001 (used) Refrigeration unit: Tecumseh Silensys H84Z Exhaust system: Stein RRT M (for V21 smoking cabinet) Stainless steel exhaust pipe: 30 linear meters, Ø 20 cm Smoking wood included: 407 pieces of knot-free beech wood, 8 × 6 × 40 cm Condition: used, well-maintained, regularly serviced Location: Selters

Year of construction: 2010, condition: not inspected (used), functionality: unexamined, Disassembled prototype filling/dispensing system – special system with V2A tanks For sale is a disassembled prototype filling/dispensing system from industrial use. This is a custom-made/special construction from Evonik/Daimler AG. The system was professionally disassembled, is in good condition, and is prepared for transport. Technical data / equipment * Manufacturer: Evonik / Daimler AG * System type: Prototype filling/dispensing system * Model: Special system / tank farm and filling system * Year of construction: 2010 * 2 tanks with 40 m³ each * 1 tank with 30 m³ * Tanks / system made of V2A * Pumps stored separately Lrodpfx Afjzabgwj Sjt * Pump list can be provided upon request * Condition: disassembled, untested, prepared for transport Notes Due to the disassembled condition, the system is sold untested. An inspection is recommended. Technical testing, media compatibility, recommissioning, and transport organization are the responsibility of the buyer. Further information, existing documents, and the pump list can be provided upon request. Please contact us preferably by email. Telephone inquiries should only be made after prior appointment.

Condition: like new (used), Year of construction: 2021, operating hours: 300 h, Prices upon request XG x 2800 5x Ca E200L 4x CA Dc 40 e Lrjdpor Rddzofx Af Sot The system was used for only 90 days and is in as-new condition. The XG-X2800LJ is a 2D/3D laser profile sensor from the LJ-V7000 series by KEYENCE Germany. This advanced image processing system offers enhanced features and flexibility for demanding inspection applications. Technical Data: Laser Scanner / Profile Measurement: The XG-X2800LJ is specifically designed for profile measurement and 2D/3D image processing. Compatibility: It is compatible with line-scan cameras, LJ-V sensors, and 21-megapixel cameras. Flowchart-Based Programming: The XG-X is intended for advanced users, enabling programming in a flowchart style. Manuals and Software: User manuals and software are available for configuration and customization via PC, as well as for remote control and capturing images and results on a PC. Please note that any shown accessories are for illustrative purposes only and may not be included with the product. For more information, please visit the official KEYENCE website. If you have further questions or require assistance, I am happy to help!

Condition: good (used), Year of construction: 2013, functionality: fully functional, The FAMAR TANDEM 400 is a powerful CNC vertical lathe with two independent machining stations. The machine is equipped with driven tools, automatic workpiece loading and unloading, a measuring probe, high-pressure coolant, and coolant filtration. The tandem design enables efficient series production and the simultaneous use of two separate machining stations. Main technical parameters: Standard chuck diameter: 400 mm Maximum chuck diameter: 400 mm Nominal turning diameter: 300 mm Maximum turning diameter: 400 mm Maximum turning length: 480 mm Maximum turning length: 300 mm Number of main spindles: 2 Max. main spindle speed: 4,000 rpm Rated power of main electric spindle: 49.6 kW Rated torque: 458 Nm S6 40% power: 61.7 kW S6 40% torque: 724 Nm Machine dimensions: approx. 3,900 × 3,500 × 3,200 mm Machine weight: approx. 21,000 kg Electrical connection: 400 V / 50 Hz Installed power: 90 kW CE compliant Tooling equipment UTTUM50 – turret for driven tools, size 50 Max. driven tool speed: 8,000 rpm Torque: 100 Nm Power: 15.6 kW UTDUM50 – turret tool disk Size VDI 50 12 tool positions Direct tool drive PPP40 – preparation for 2 hydraulic circuits For special workpiece clamping Piping and valves Control via M-functions Automation TRPAPE20 – 1 automatic circulating pallet conveyor for loading and unloading workpieces Lrjdpfxjz Dq N Ej Af Sst A single conveyor system for both workpiece infeed and outfeed Circulating pallet magazine Belt design Pallet occupancy monitoring system Pallet sorting system Working height approx. 950 mm Automatic workpiece loading and unloading via the machine TRPNVBPTE4 – Shuttle system with rotary station Loading/unloading shuttle system Integrated rotary station Including 1 set of jaws for the workpiece AZGRRB500 – set of jaws for Shuttle rotary station MPDM2 – automatic measuring probe Automatic workpiece measurement Coolant, filtration, and chip removal LBCVTT50 – belt conveyor for chips Separate conveyor for chip removal Particularly suitable for short chips, such as cast iron, brass, and some aluminum alloys LBVA760 – coolant tank Volume 760 l LBAP10 – high-pressure pump Pressure 20 bar Internal tool cooling LBFTC – paper filter for coolant Suitable for cast iron and aluminum Filtration of particles approx. 0.08 mm Flow rate max. 60 l/min LBFTTDF – double switchable filter Filtration of particles approx. 0.1 mm Bypass system allowing filter cartridge replacement AZPL – air workpiece position control Additional equipment: CNC control Siemens 840D sl 2 main spindles Driven tools C-axis 12-position turret VDI 50 1 automatic workpiece pallet conveyor Shuttle system with rotary station Automatic measuring probe Separate belt conveyor for chips High-pressure cooling 20 bar Coolant filtration Hydraulic clamping circuits Central lubrication Complete safety guarding CE The machine is particularly suitable for automated series production of rotational parts, where the two independent machining stations, driven tools, and automatic workpiece handling can be utilized.

Condition: good (used), NATUS (Micromed) BrainQuick Mobile Video EEG System – SD PLUS Research Amplifier (48 channels) (used) This high-performance, 48-channel EEG system combines flexibility, signal quality, and ease of use in a compact, mobile solution. (Price is per unit) Key Features: SD PLUS™ Research Amplifier (48 channels) – Supports up to 40 common reference channels with multiple auxiliary inputs Exceptional Signal Integrity – High-resolution acquisition with a sampling rate of up to 16 kHz Lrjdpfx Afezhicns Sst Optimized for Demanding Environments – suitable for technical evaluation, signal analysis development, training environments, spare parts recovery, and other non-clinical applications. Intuitive Interface – User-friendly layout with customizable toolbars for live and review modes Flexible Layout Options – Switch between study type and workflow stage, or centric views Integrated Data Management Quick Editing Tools – Make fast adjustments without leaving the current screen The buyer is solely responsible for determining legal permissibility, regulatory status, technical suitability, installation requirements, maintenance requirements, user training requirements, and lawful intended use in the destination jurisdiction prior to purchase and prior to any use. The seller makes no representation that this equipment complies with Regulation (EU) 2017/745, is suitable for putting into clinical service, or is lawful for clinical deployment in any specific country.

Year of construction: 2024, condition: like new (used), functionality: fully functional, Rental Hosokawa Alpine RO 28/40 system by Alpine Rentals. Cutting mill with Patented cross-scissor-cut rotor guarantees optimal material distribution at maximum cutting performance. Hinge-back screen support permits easy screen removal and perfect access to clean the machine and to exchange the knives. Perfect for industries such as recycling (for blow film, cables, plastics, etc.) and food (tee, spices, dried vegetables, etc.). Technical details Design: Non Pressure Shock Resistant (NPSR), non ATEX, non gas tight Material of construction: -product contacted parts: stainless steel -non product contacted parts: normal steel Food grade Wear protection: without Scope of supply Complete Hosokawa Alpine Rotoplex RO28/40 production plant consisting of: mill inlet with safe design for manual feeding, mill with rotor, knifes and sieve for the rotor, including a relays control cabinet everything fitted on a frame, product fines collecting barrel and vacuum cleaner with filter. REMARK: The user must provide an on site operating platform for the operator to safely handle the feed material and feed it in to the mill. This is NOT part of our scope. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Lrsdpfxov Dalps Af Sot We are also interested in buying back disused HOSOKAWA ALPINE machinery

Condition: new, Year of construction: 2025, Advantages of Pre-glued Dowels • No additional glue required when inserting dowels Lodpfx Afewu Dnno Ssrt • No cleaning required for the water supply system Advantages of the DübelJet • Recoil-free gun • Simple handling • Mobile handheld device • Universal application range Technical Data of the DübelJet Dowel system and water supply system designed for pre-glued dowels • Dowel diameter: 8 mm • Dowel length: 35 mm (default setting, adjustable from 30 to 40 mm) • Dowel projection: 12 mm (default setting, adjustable from 7 to 20 mm) Universal application • Insertion of pre-glued dowels (with water), especially in furniture manufacturing • Insertion of positioning dowels (without water) made of wood or plastic, e.g., in frame construction or in combination with screws or cabinet connectors

Condition: excellent (used), Year of construction: 2015, KHS INNOFILL DVD 40 CAN FILLING LINE MAX SPEED: 34,000 CPH 330ML IN 24 PACK WRAPAROUND CARTON CURRENT SPEED: 24,000- 28,000 CPH IN SMALL WRAPAROUND CARTON 4/6/8/10/12 PACKS LOCATION: UK STANDARD CAN 330ML & 440ML LID 202 SLEEK CHANGEPARTS FOR FILLING BLOC AVAILABLE GPI PACKER ADDED IN 2018 ROBOPAC PACKER ADDED IN 2022 EQUIPMENT LIST: FIPAL MINIDEPAL 20 LA DEPALLETISER • TWIN LANE RINSER • KHS INNOFILL CAN DVD 40 FILLING BLOC 34,000 CPH • FERRUM F6 6 HEAD SEAMER • CSW DEVENTER LID FEED SYSTEM • HEUFT SPECTRUM TX • EURO SISTEMI CAN DRYERS • TELEDYNE TAPTONE INSPECTION • ROBOPAC PRASMATIC TC400 COMPACT CASE PACKER • FT SYSTEM CP600 TP TUR300 Z200 RAS001 • GPI QUICKFLEX 300 MULTI-PACKER • HITACHI INK JET PRINTER • PACKITAL LANER • COMPLETE CONVEYOR SYSTEM • FIPAL PAL 80 F PALLETISER • ATLANTA STRETCH REVOLUTION LS STRETCH WRAPPER LOCATION: UK VIEWINGS BY APPOINTMENT WELCOME. PLEASE GET IN TOUCH TO ARRANGE AN INSPECTION. Lredpfx Afjtraaas Set INDASSOL.COM