Used Rau Horizontal Band for sale (13,346)

Condition: new, Year of construction: 2026, For sawing, e.g., stainless steel, tool steel, hollow profiles, and solid materials. Two-pole drive motor enables saw blade speeds of 30 and 65 m/min. Monitoring of the saw blade tension electromechanically via microswitches. When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve – additional locking on the cylinder is therefore not required. Saw arm inclined by 25°, resulting in a longer service life of the saw blade. Precise and robust blade guides with adjustable carbide plates. After the cutting process is completed, the saw blade stops automatically in the lower end position. Lowering of the saw arm by gravity or manually. With continuously adjustable, constant saw arm lowering speed via hydraulic cylinder. Dimensions and weights Fjdsg U Uv Ropfx Ad Ijpi Length approx. 1200 mm Width/Depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage 400 V Mains frequency 50 Hz Machine data Saw blade speed(s) 30 / 65 m/min Speed stages 2 Saw blade length 2450 mm Saw blade width 27 mm Saw blade thickness 0.9 mm Material feed Table height, material feed 925 mm Cutting ranges 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular (lying, hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular (lying, hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular (lying, hollow profile) 90 x 90 mm Art. No.: 3680001 Location: In stock, 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, For sawing pipes and solid materials made of high-grade and tool steel. Two band speeds via a pole-changeable motor. Robust gearbox with hardened and ground shaft. Precise and robust band guides with adjustable carbide plates. Longer service life of the saw band due to a 25° saw arm inclination. Efficient coolant application to the saw band guides. Electromechanical monitoring of the saw band tension; if deviations occur, a microswitch switches off the machine. Chip removal brush for optimal cleaning and maintenance of the saw band. Operation of the semi-automatic machine: Automatic workpiece clamping after the start of the cutting cycle. Execution of the sawing cut with the selected band speed. Automatic stop of the lowering movement and the saw band in the lower end position. Automatic retraction of the saw arm to its upper end position. Vise opens automatically. The operator only needs to move the material. Equipment: Two band speeds Cutting feeler Coolant system Chip removal brush Saw band tension monitoring Swiveling control panel Length approx. 1860 mm Width/Depth approx. 1045 mm Height approx. 1750 mm Fpodpfx Aed Hx Uqod Iei Weight approx. 405 kg Drive power Power consumption 1.5 kW Electrical data Connection voltage 400 V Machine data Saw band speed(s) 20 - 100 m/min Speed stages continuously variable Saw band length 2720 mm Saw band width 27 mm Saw band thickness 0.9 mm Cutting angle +60 – -45 ° Cutting ranges 0° round (pipe) 230 mm 0° round (solid material) 150 mm 0° rectangular lying (hollow profile) 280 x 180 mm 0° bundle (pipe) 180 x 120 mm -45° round (pipe) 195 mm -45° round (solid material) 110 mm -45° rectangular lying (hollow profile) 180 x 170 mm -60° round (pipe) 125 mm -60° round (solid material) 80 mm -60° rectangular lying (hollow profile) 120 x 100 mm +45° round (pipe) 185 mm +45° round (solid material) 110 mm +45° rectangular lying (hollow profile) 180 x 120 mm Feed Table height material feed 785 mm Min. remaining workpiece length 22 mm

Condition: used, Horizontal Nienkemper band saw, type HBS 1 1600mm roll diameter Main motor 75kW Fpsdpfxecn Dkle Ad Iei with fully hydraulic clamping carriages Log clamping system, log turner

Condition: good (used), functionality: fully functional, pressing force: 160 t, stroke length: 500 mm, operating speed: 30 mm/s, reverse speed: 40 mm/s, table width: 850 mm, table height: 780 mm, throat depth: 400 mm, oil tank capacity: 210 l, total length: 3,370 mm, total width: 1,730 mm, total height: 1,480 mm, overall weight: 6,500 kg, installation height: 400 mm, pressing speed: 3 mm/s, Equipment: documentation/manual, Hydraulic horizontal box press PYXWM-160. Manufactured by WMW VEB Dessau - 1978. The machine has been overhauled. Ready to work. Max. pressing force 160 tons. Piston stroke 500 mm. Piston speed: Forward 30 mm/sec Pressing 2.5 mm/sec Backward 40 mm/sec Fpjdpfx Aewndnusd Isi Height from base to center of piston 260 mm. Machine frame height 780 mm. Base length from support tool 600 mm. Support tool length 520 mm. Max. clamping width 1730 mm. Working clamping width 400 mm. Support tool height 400 mm. Support tool spacing min-max 240-1100 mm. Dimensions: Length 3370 mm. Width 1730 mm. Height 1480 mm. Frame width 700 mm. Engine power 11 kW. Oil tank capacity 210 liters.

Condition: used, Technical details: cutting diameter: 310 mm cutting width: 360 mm total power requirement: ca. 1,8 kW Miter cutting possible Workpiece clamping hydraulic bracket lowering hydraulic incl. roller conveyor entrance approx. 2100mm and exit approx. 2700mm Fpodpfeu Niifox Ad Iji *

Condition: used, Year of construction: 2000, gebraucht 2000 6253 prompt, Zwischenverkauf v 1900 € 1 Schwenkrahmen 2480 x 0,9 x 27 mm 45 / 90 m/min 225 mm 180 x 245 mm rund 100 mm, 100 x 100 mm rund 160 mm, 160 x 160 mm 935 mm 1.1 kW 1500 mm 700 mm 1400 mm 225 kg Downfeed with damper cylinder and manual valve Coolant equipment Vice with fast clamping lever Roller table 2000 mm with manual gauge 3 pcs. spare bands Operating manual with EC conformity declaration OPTIONS: Further roller tables and band saw blades on request BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Fodsynmy Eopfx Ad Ispi Details:

Condition: used, Year of construction: 2023, gebraucht 2023 6242 prompt, Zwischenverkauf v Italien 5400 € 1 Schwenkrahmen 2450x27x0,9 mm 35/70 m/min 220 mm 220 mm 260x140 mm rund 160 mm, quadrat 155 rund 95 mm, quadrat 95 mm 965 mm 1200 mm 1100 mm 1860 mm 240 kg demo machine / mint condition net price (price for new machine € 6.730,00) manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment OPTIONS: Roller tables and band saw blades on request BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE Fpedpfx Ajwiqpzed Iei We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: new, cutting diameter 225 mm saw band length 2480 mm cutting width max. 245 x 150 mm voltage 230 V power capacity 1,5 kW dimensions of saw-band 2480 x 27 x 0,9 mm Fsdpfxoy Ty Dpj Ad Iopi mitter cutting 0 - 60 ° cutting speed 20 - 90 m/min weight of the machine ca. 185 kg dimensions of the machine ca. 1,4 x 0,69 x 1,7 m - stepless speed - stepless feed - miter cut - Bi-metal saw band - Material stop - Machine base - Coolant device

Condition: new, Year of construction: 2025, cutting diameter 650 mm saw band length 8830x67x1,6 mm cutting width 1,6 mm Control halbautomatisch Cutting area - square 650 x 650 Cutting area - flat 650 x 1300 Fpsdpfoy S Duisx Ad Isi total power requirement 7,5kW / 3100 Nm weight of the machine ca. 5100 kg dimensions of the machine ca. 2100x1550x4450 mm The KSY 650 X 1300is a semi-automatic and column-guided horizontal bandsaw. Optional Specifications - Motorized System For Roller Table - Laser Line - Extra Double Roller Table - PLC-Screen - Anti-Vibration System The pictures are for orientation only and do not represent a true-to-scale image of the machine.

Condition: new, Year of construction: 2025, saw band length 3660 x 27 x 0,9 mm cutting width 0,9 mm total power requirement 1,5 kW / 300 Nm weight of the machine ca. 1200 kg dimensions of the machine ca. 1400 x 1900 x 1900 mm The GERD WOLFF KMS 280 V is a precision band saw with servo drive that has been specially developed for consistently precise cutting of round material from 10- 135 mm diameter. Capacity for round material (mm) diameter 10 mm 276 pieces are possible diameter 20 mm 78 pieces are possible Fsdey S Drzspfx Ad Iopi diameter 30 mm 36 pieces are possible diameter 40mm 21 pieces are possible diameter 50mm 15 pieces are possible diameter 60mm 6 pieces are possible diameter 70mm 3 pieces are possible diameter 80 mm 3 pieces are possible diameter 90 mm to 135 mm 1 piece is possible Feed length in one piece: 780 mm

Condition: used, cutting diameter 360 mm saw band length 0 mm cutting width 0 mm cutting speed 0 m/min total power requirement 1,0 kW weight of the machine ca. 0,6 t dimensions of the machine ca. 2,2 x 2,05 x 1,5 m Horizontal Bandsaw - Max. Miter Angle: 45° - Coolant System - Emergency Stop - 1300 mm Infeed Roller Conveyor - 2 Spare Saw Blades Fpjdszafktjpfx Ad Ioi

Condition: good (used), Year of construction: 2019, operating hours: 1,404 h, machine/vehicle number: 397, Offer 26148 Technical data: - Pressing force 420 kN / 42 t - Stroke 0 - 300 mm Fpedpfx Adjy Uwhbj Iji - Stroke speed 0 - 0.6 m/min - Tool height 200 mm - Bending capacity - with MW 125 flat prism, approx. 200 x 16 mm - with MW 240 flat prism, approx. 200 x 24 mm - Pipe bending up to 2 inches - CNC control SIEMENS SIMATIC HMI TOUCH - for angle programming + length programming - controlled length stop 3000 mm - various bending tools - Operating hours (read) 1404 h - Drive 400 V / 4.0 kW - Space requirement approx. W 850 x H 1250 x D 1250 mm - Weight approx. 1200 kg

Condition: used, Hydraulic horizontal clamp Fsdpfx Aey Ud Rpsd Iepi

Condition: good (used), Year of construction: 2000, Offer 24477 Technical Specifications: - Cutting range at 90° round: 220 mm - flat: 250 x 100 mm - square: 170 x 170 mm - Cutting range at 45° round: 150 mm - flat: 150 x 150 mm - Mitre adjustment left and right - Saw blade dimensions: 2890 x 27 x 0.9 mm - Cutting speeds: 40 + 60 m/min - Hydraulic lowering of the saw frame - Infinitely adjustable cutting pressure: 0 - 10 m/min - Total drive power: 400 V / 1.5 kW Fpodsy H Dmhjpfx Ad Ioi - Installation space approx.: W 1500 x H 1000 x D 650 mm - Weight approx.: 250 kg

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm band speed 40/80 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 670 kg How it works in the CCS version: After the material has been advanced and Once the vices have closed, the cutting process begins. The lowering is done by its own weight and is controlled by a spring balanced and a hydraulic brake cylinder regulates when the cut is carried out, the saw arm is moved by hand to the necessary position for the feed of the material is pushed up. Electrical panel (marked cable connection, indicator light for Ready for operation, safety main switch provided with padlock, Switch or speed switch, emergency stop, thermal magnetic protection, Low voltage system 24 volts) Electronic tape tension converter with on-screen display. Manual vice with quick lock Base frame with coolant tray and chip drawer, which has a Motorized chip conveyor (accessory) can be replaced. Electric coolant pump for cooling and lubricating the saw blade. Chip clearing brush Adjustable precision stops to make cuts of the same length. Machine is intended for pallet truck transport. Fodpfx Aefg E H Ted Iopi Bimetal saw band for solid and profile material Tools and instructions for use

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3320 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Electro-hydraulic semi-automatic band saw SHARK 332 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Some features: New centralized switch console on an articulated arm. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Turntable (on roller bearings of 420 mm with preloaded thrust bearings assembled). Double belt speed (40/80 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base designed to completely contain the coolant, even with maximum angle cuts. The coolant pan (provided with an electric pump for lubrication and Cooling of the saw band) and the chip drawer (can be replaced by a Chip conveyor to be replaced - see special accessories) are in the base frame built-in. Preparation for installing the minimum blade lubrication kit (Optional, in addition to the conventional standard lubrication with emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Fpodpfx Adjfg E H Uo Iji Adjustable length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: new, capacity 90 degrees: round 240 mm capacity 90 degrees: square 240 mm 165 x 310 mm saw band length 2725 x 27 x 0,9 mm mm table height 890 mm band speed 35 / 70 m/min total power requirement 1,1 kW weight of the machine ca. 0,35 t Dimensions (LxWxH) 1,7 x 0,75 x 1,8 m The Z252/DG has the following equipment: - hydraulic cylinder, - emulsion pump, - eccentric clamp, - base, - saw blade, Fedpfxehpktvo Ad Ijpi - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use.

Condition: new, cutting diameter 185 mm saw band length 2.085 x 20 x 0,90 mm table height 915 mm Fjdpfx Ashpktrsd Ispi band speed 35/70 m/min capacity 90 degrees: round 185 mm capacity 90 degrees: square 150 mm capacity 90 degrees: flat 220 x 150 mm connected load frequency 400 V total power requirement 0,8 kW weight of the machine ca. 195 kg dimensions of the machine ca. 550 x 1.280 x 1.740 mm mm Metal band saw with stepless electronic speed control and automatic lowering. • Selector switch for hydraulically controlled or manual band arm lowering • Saw arm can be swiveled up to 60 ° to the right • Quick-action vice • Belt guide with 8 ball bearings • Hydraulic saw band tension with tension pressure display and band break shutdown •Incl. Coolant system •Incl. Machine cabinet

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950x27x0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 485 kg dimensions of the machine ca. 1700 x 1000 x 1800 mm Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw head lowers for the cut – Motor switches off – Saw head rises – Vise opens. Semi-automatic dynamic system (manual lowering of the saw band bow up to to the desired position and cycle start via the manual button.) Fjdofg E H Sopfx Ad Iopi Some features: New centralized control console on an articulated arm to allow the operator can be easily switched from any working position. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Large work surface with turntable on roller bearings, measuring 265 mm preloaded thrust bearing, mounted. Double belt speed (36/72 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base frame with pull-out coolant tray. Electric coolant pump for cooling and lubricating the saw band. Preparation for installing the minimum blade lubrication kit (Optional), in addition to the conventional standard lubrication Emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: new, cutting diameter 280 mm capacity 90 degrees: flat 380 x 260 mm capacity 90 degrees: square 260 x 260 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3440 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Electro-hydraulic, semi-automatic band saw with additional manual and semi-automatic-dynamic function, for cuts from 45° right to 60° left. Some features: Pivoting control panel on vertical post. 420 mm large rotary table on roller bearings with preloaded thrust bearing and replaceable steel inserts. Fedpfx Adefg E Iae Ijpi Double belt speed (40/80 m/min.)

Condition: new, cutting diameter 250 mm saw band length 2950 x 27 x 0,9 mm table height ca. 800 mm band speed 36/72 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,37 t MEP sawing machine: Saw band bow, vice unit and base made of durable cast iron Precision grade marking on the cast iron structure Electrical system (with fully identifiable electrical wiring and Low voltage system 24 V) Switch handle IP 55 for manual cycles (if available) Rotating scraper brush for the saw band Clamping unit with vice for quick approach Accurate stops with adjustment for miter cuts at 0°, 45°, 60° left Bi-metal saw band 2950 x 27 x 0.9 mm Keys, instructions for use and instructions for ordering spare parts in the User language SHARK 281 with manual operation and SHARK 281 CCS with manual operation and cutting with automatic head feed by its own weight. CCS (Cut Control System) with (A switch for manual and automatic Cutting – B) Cutting speed regulation – C) Hydraulic brake with tank – D) End stop for stopping the belt) also optional for already produced machines available. Vice with quick adjustment Fpsdjfg E H Iepfx Ad Iei Hydraulic converter for belt tension display Electric coolant pump for cooling and lubricating the saw band and manageable coolant tray above the base frame In the versions with a pneumatic vice (MA), the opening takes place and Closing the vise with a manual valve (with pedal control as option available)

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm turning speed range: 36 / 72 m/min dimensions of saw-band 2950 x 25,4 x 0,9 mm weight of the machine ca. 0,4 t Dimensions (LxWxH) 1,5 x 0,9 x 1,5 Semi-automatic function: Vice closes and motor starts, saw head lowers for the cut, motor switches off, saw head rises, Vise opens. Some features: New centralized switch console on an articulated arm. Latest generation hydraulic control unit, highly powerful and Fodpfsfg E H Rsx Ad Ijpi with low energy consumption. Base frame with pull-out coolant container. The machine complies in all areas CE regulations!

Condition: new, cutting diameter 220 mm saw band length 2450 x 27 x 0,9 mm table height 915 mm band speed 35 + 70 m/min connected load frequency 400 V capacity 90 degrees: round 220 mm capacity 90 degrees: square 210 x 210 mm capacity 90 degrees: flat 230 x 185 mm total power requirement 1,2 kW weight of the machine ca. 240 kg dimensions of the machine ca. 870 x 1550 x 1740 mm The Zimmer Z241/R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After the cut, the machine stays through one Fpsdpfx Asfgyh Njd Iei Safety limit switches stand. The reduction is infinitely variable Hydraulic system adjustable. The saw arm can be raised after the cut any position. The saw arm remains at the desired position stand. The Z241 / R has the following features: Hydraulic cylinder, emulsion pump, eccentric tensioner, base, saw band, 400V Connector -16A- The machine is completely assembled and delivered ready for use.

Condition: good (used), Year of construction: 1985, range L-W-H 400x300x200 mm saw diameter 420 mm weight of the machine ca. 3500 kg Fodpfx Adovf N Suo Iopi Producer: KASTO Type: HBA 420U Year of manufacture: 1985 Dimensions (width x height x depth): approx. 400x200x300 cm At7Zcq Fully automatic NC horizontal bandsaw 1 chip conveyor, 1 external chip conveyor, 1 person. driven roller conveyor approx. 450 cm.

Condition: good (used), Year of construction: 1995, range L-W-H 3,50/2,40/2,20 mm weight of the machine ca. 3500 kg Producer: KASTO, Type: HBA 420 AU, C93I8De Fedpfxow N S Ecj Ad Ijpi Year of production: 1995 Fully automatic NC horizontal band saw with hydraulic clamping device up to 400 mm, 1 chip conveyor, 1 external chip conveyor, 1 roller conveyor, 1 roller conveyor, hydraulic drive, motor switched off, Dimensions (width x height x depth): approx. 400x200x350 cm