Used Protec Welding Table for sale (20,601)

Condition: new, table diameter 350 mm table load 100 Kg swivelling range 90 Grad turning speeds 0,2 - 2 stufenlos U/min table load capacity 50 kg. vertikal total power requirement 220 kW weight of the machine ca. 0,055 t Codoupw Nxopfx Afgshc dimensions of the machine ca. 0,46 x 0,4 x 0,42 m

Year of construction: 1990, condition: good (used), Welding turntable, 2-ton load capacity with hand and foot remote control Speed and inclination continuously adjustable good condition, machine is robust and virtually indestructible Height when tilted up to the center: 1.05 meters Height when horizontal: 1.3 meters Cjdpfx Aofxq U Nefgehc Diameter: 1.3 meters Length: 2.2 meters Width: 1.4 meters Speed: from 0.01 RPM to approx. 1.0 RPM

Year of construction: 2002, condition: excellent (used), Welding positioner, Mecome, 6 tons Cedpod S Hfisfx Afgshc 6000 kg load capacity with hand and foot remote control Speed and inclination continuously adjustable 0.02 RPM to 1.1 RPM Diameter 1500 mm Height to center when tilted 1000 mm Height in horizontal position 1180 mm Length 2000 mm Width 1500 mm Condition: optically and technically flawless, runs very quietly.

Condition: new, table diameter 300 mm table load 100 Horizontal kg swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.0 U/min turning speeds 1.2 - 12.0 U/min bore 20.0 mm total power requirement 230 Volt Cedpfx Afjxaatnjgohc weight of the machine ca. 50.0 kg dimensions of the machine ca. 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch

Condition: new, table diameter 340 mm table load 160 horizontal kg. table load 100 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.6 - 6.0 U/min bore 60.0 mm motor 230 Volt weight of the machine ca. 56.0 kg range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. Csdsxabm Nspfx Afgjhc - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating instructions in German Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) - Speed display

Condition: new, table diameter 340 mm table load 290 horizontal kg table load capacity 190 vertikal kg turning speeds 0.6 - 6.0 U/min spindle bore 60.0 mm swivelling range 0 - 90.0 Grad weight of the machine ca. 62.0 kg dimensions of the machine ca. 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of Chodpfxjxaafqo Afgoc 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Functions of the COM 1000 control: - Right / left rotation - stepless speed control - welding torch on / off - Control for turning time

Condition: new, number 100 Positionen 28 mm condition neu weight 280 kg dimensions 1,2 x 0,5 x 1,3 m XXL starter package, consisting of: - 15x – standard clamping pliers - 5x – multi-clamp pliers - 10x – side tensioners with eccentrics - 15x – Loose cam H30 Chsdpfju Aw Ngjx Afgsc - 10x – Loose cam H100 - 2x – pipe insertion cam series - 10x – quick release bolts - 10x – stop block 15mm - 4x – Right Angle XL - 6x – Right angle - 6x – angle of attack - 1x – box - 1x – Insert holder - 1x – Allen key - Tool trolley

Condition: new, Year of construction: 2026, Dimensions: 2000x1000mm Side wall: 200mm Weight of the table: approx. 370 kg Load capacity: 2 000 kg Number of legs: 4 Sturdy and solid construction Highest quality finish Perfect flatness of the table [+/- 0.5 mm per meter] Material S355J2+N System of holes 16 or 28 in a grid of 100 x 100 mm Three rows of holes on the side walls Chamfered and milled holes for easy tool mounting Engraved scale in 100 x 100 mm grid Height adjustment with standard feet approx. 880 - 930 mm Possibility of using stainless steel supports Possibility of connecting the tables for a larger working area Chedpfjy T N Nuex Afgsc All tables are reinforced with ribs Designed in accordance with the ISO 2768-1 standard Milled edges of the worktop Worktop thickness 12 mm Table legs made from 80x80mm profiles Load capacity: 500kg/leg*

Year of construction: 2018, condition: like new (used), Dumeta hydraulic welding positioner, height-adjustable 500 kg load capacity, height-adjustable welding positioner with through-hole, 100–200 mm Table diameter 700 mm Horizontal height min. 0.6 m, max. 1.2 m Codpohua Dqefx Afgjhc Tilted height min. 0.40 m, max. 1.0 m Speed 0.11–1.25 RPM Weight 750 kg Tilt up to 135° Hand and foot remote control with speed display Very robust

Condition: new, table diameter 560 mm table load 0,3 t swivelling range 0-90 Grad table turning speeds 0,25 - 4 U/min Torque max. 360 N/m centre of gravity max. 150 mm total power requirement 0,4 kW The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Characteristics: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control - Reduction of crane hours and handling time, during which the Chjdpfxjgvkgts Afgjc Improved occupational safety. - Self-locking gear, therefore no leading or trailing behind with eccentric load - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust construction - CE certificate - The D-HB series includes a remote control with foot pedal for left-right / Start-stop.

Condition: new, table load 1000 kg table diameter 900 mm turning speeds 0,12 - 1,2 U/min swivelling range 0 - 135 Grad speed Kipp 0,35 U/min welding current 500 A dimensions of the machine ca. 1475 x 1050 x 900 mm For heavy industry When choosing a turntable, it is essential Codpfxjxaac Ao Afgshc Turning and tilting torque must be taken into account. To note applies to how far the center of gravity of the workpiece is from the The faceplate is away or how far the center of gravity is is eccentric from the center. By means of a Rotary and tilting tables can be used to optimize workpieces position for welding. - Robust construction. - Infinitely variable. - Hand remote control. - HF protected. Furnishing : - 1 control (integrated) - 1 wired remote control

Condition: new, table diameter 690 mm table load 0,5/0,25 t swivelling range 0 - 90 motorisch Grad turning speeds 0,2 - 2,5 U/min spindle bore 100 mm Torque 375 Nm welding current 500 Ampere connected load frequency 230 Volt weight 290 kg Dimensions (LxWxH) 800 x 750 x 750 mm Welding turntable with - Footswitch Cjdpfefv Aykex Afgohc - tilt motor - Speed continuously adjustable - 500 amps welding current transmission

Condition: new, table length 1300 mm table width 800 mm table height 920 - 1000 mm 1000 kg height of stroke 510 - 1550 mm total connected load 1,5 kW connected load frequency 230 V weight of the machine ca. 0,55 t Welding table on lifting table: Hole diameter: 28mm The table is made of 15mm thick S355 steel The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Side panels 150 x 10mm Chjdpfjvn U Exsx Afgoc Ribbed bottom for reinforcement.

Condition: new, table length 1200 mm table width 800 mm table height 900 mm table load 2000 Kg weight of the machine ca. 0,24 t dimensions 1,0 x 1,0 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. Cedpefg U S Eefx Afgshc including ground storage Accessories optional !!

Condition: new, Year of construction: 2025, load capacity: 1,000 kg, Various very heavy-duty welding tables, machined, partially plasma nitrided Sizes: - 1 x 1 meter, €1,500 - 1.2 x 1.2 meters, €1,700 - 1.5 x 1.5 meters, €1,900 - 2 x 1 meter, €2,300; plasma nitrided €3,300 Chedpfxewu Exze Afgec - 2.4 x 1.2 meters, €2,900; plasma nitrided €3,900

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 11000 € 211.2 € 1000 kg 150 mm 150 mm 360 kgm 230 / 50 V / Hz 0.55 kW 0.75 kW 0.1 - 3 U/min Csdsyq St Aspfx Afgshc 60 s 1200 mm M20X6 mm 1000 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) OPTION: Pneumatic centering attachement

Condition: new, number 37 Positionen 28 mm Chjdpoupxpasfx Afgsc condition neu weight 35 kg Basic set 2: 51 pieces, 28mm system, consisting of: Forceps: 8 x 280604 Bolt: 12 x 280511 Stop: 8 x 280420.N Angle: 4 x 280110.G Threaded bolt 8 x 280543 Stop 8 x 160415 Stop 2 x 284050 Accessory set. 1 x 163999 Price plus packaging and transport.

Condition: new, number 65 Positionen 28 mm condition neu weight 49 kg Basic-Set 3: 69 pieces, 28mm system, consisting of: Forceps: 10 x 280604 Bolt: 18 x 280511 Stop: 10 x 280420.N Angle: 6 x 280110.G Angle: 4 x 280162.N Cjdpfx Ajupw Stsfgjhc Threaded bolt 8 x 280543 Stop 8 x 160415 Stop 3 x 284050 Accessory set. 1 x 163999 Price plus packaging and transport.

Condition: new, neu ca. 6-8 Wochen ab Auftrag 10265 € 197.09 € 4000 x 2000 mm 850 mm 8000 kg 2340 kg 200 mm 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners Chedpfxeyq Sqzo Afgec OPTION (PRICE ON REQUEST): Diagonal holes

Condition: new, neu Chjdpfx Afowirlqegjc 2486 prompt, Zwischenverkauf v 545 € 1 28 mm Tools are not included in the price.

Condition: excellent (used), Note: The pictures serve to clarify the material. - The workbench frames are commissioned unassembled; - The production time is usually approx. 3 - 5 working days. Basic dimensions: Width: approx. 3,200 mm Height: approx. 940 mm Depth: approx. 850 mm The scope of delivery includes: Csdpfotk Iwasx Afgjhc 04x square tube, used Material color: sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 2,900 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 3,000 mm Depth of chipboard: approx. 850 mm Surface: possibly coated (two-piece if necessary) 08x Mounting bracket, new Finish: sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 32x screws: M12 32x nuts: M12 32x washers: M12 Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: new, number 10 Stk. clamping range 15 - 50 mm 28 mm weight 10 kg dimensions 0,3 x 0,3 x 0,2 m Basic set 4 / 53 pieces for table top thickness 15mm and 25mm 6 pcs screw clamps 14 pcs. quick clamping bolts 2 pcs. universal stop 100mm 6 pcs. universal stop 150mm 6 pcs. universal stop 225mm 2 pcs. universal stop 300mm 6 stop and clamping angles 175mm 4 stop and clamping angles 275mm Chodpfevkixlsx Afgoc 2 pcs. prisms 60mm 1 piece torch holder 1 pc. Eccentric stop 100mm diameter 1 piece perforated brush 30mm 2 pieces separating lotion 500ml, on a natural, biological basis 2 pcs. Welding table cleaner 500ml, on a natural, biological basis

Condition: new, table length 2400 mm Codpfx Aewz Rubofgehc table width 1200 mm 4000 kg height of stroke 510 - 1550 mm total connected load 1,5 kW connected load frequency 400 V weight of the machine ca. 0.95 t Welding table on lifting table: Hole diameter: 28mm The table is made of 15mm thick S355 steel The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Side panels 150 x 10mm Ribbed bottom for reinforcement.

Condition: new, number 10 Stk. clamping range 15 - 50 mm 28 mm weight 10 kg dimensions 0,3 x 0,3 x 0,2 m Basic set 4 / 53 pieces for table top thickness 15mm and 25mm 6 pcs screw clamps 14 pcs. quick clamping bolts 2 pcs. universal stop 100mm 6 pcs. universal stop 150mm 6 pcs. universal stop 225mm 2 pcs. universal stop 300mm Chjdpfsvki E Eex Afgec 6 stop and clamping angles 175mm 4 stop and clamping angles 275mm 2 pcs. prisms 60mm 1 piece torch holder 1 pc. Eccentric stop 100mm diameter 1 piece perforated brush 30mm 2 pieces separating lotion 500ml, on a natural, biological basis 2 pcs. Welding table cleaner 500ml, on a natural, biological basis

Condition: new, table load 500 Kg table load capacity 250 kg. vertikal table diameter 550 mm swivelling range 135 (-45 - +90) Grad turning speeds 0 - 5 stufenlos U/min connected load frequency 230 V Chedpfx Afoulbbwsgoc total power requirement 0,8 KW weight of the machine ca. 0,255 t dimensions of the machine ca. 0,82 x 0,73 x 0,71 m Welding turntable with - large passage 165mm - Footswitch - tilt by motor - Speed infinitely adjustable - 250 amp welding current transmission Demonstration machine documentation only in English.