Used Muhr Und Bender / Mubea Profile-/Bar Steel Shear / Hole Puncher for sale (39,915)

Condition: used, 100,000 litre – underground tank - double-walled - cleaned Bodpfexcgg Tex Albjwt - 2 manholes - slight traces of dismantling present - internal coating possible upon request - Approved for service and firefighting water Loading and transport can be offered! Only serious and credible enquiries with the following details will be answered: Name, e-mail address and telephone number.

Condition: used, functionality: fully functional, machine/vehicle number: 0159689206365, input voltage: 220 V, input frequency: 50 Hz, used Muhr & Bender KLH 500/610 Bjdpfx Aey Tit Tjlbswt Price negotiable.

Condition: used, functionality: fully functional, machine/vehicle number: 1028789976479, input voltage: 380 V, input frequency: 50 Hz, used Muhr & Bender Price negotiable Bedpfx Aoy Tip Islbowt

Condition: good (used), Used stainless steel barrel Item number: 10819 Last use: Pharma Volume: 100 liters Type: Vertical Material (wetted parts): 14301 / AISI 304 Design: Single-walled Operating pressure according to type plate: ATM Tank dimensions: Bwjdpfxetqd Nue Albot Inner diameter: 450mm Outer diameter: 454mm Cylindrical height: 640mm Total width: 480mm Total length: 500mm Total height: 665mm materials: Interior: 14301 / AISI 304 External parts: 14301 / AISI 304 Equipment: Nameplate: no Clamping ring

Condition: used, total length: 1,330 mm, total width: 1,040 mm, total height: 1,150 mm, Empty weight: 1.800 kg Price: On request Bwjdpfxjxuf Sls Albst - Documentation available: No - CE certificate present: No - Drive system: Conventional - Drive: Hydraulic - Vertical/Horizontal: Horizontal and vertical - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 3 - Shaft diameter [mm]: 75 - Top roll diameter [mm]: 225 - Capacity diameter round [mm]: 60 - Transport dimensions: 1330mm x 1040mm x 1150mm (l x w x h) - Transport weight [kg]: 1800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1991, 2 vertical stainless steel tanks with dished bottoms, shell cooling zone, manhole, sampling tap, insulation and central outlet. Additional title: 2 insulated, coolable tanks Volume: 44916 l Operating pressure: 0,9 bar Operating temperature: 20 °C Width: approx. 4650 mm Height: approx. 4130 mm Weight: 5000 kg Material: stainless steel Bwjdpfx Aloztya Ijbst Position: vertical Base construction: cylindrical tank with dished bottoms, placed an 4 square tube feet Features: insulated, covered, 1 cooling zone (183 l, 0.9 bar), manhole, safety valve, vacuum valve, CIP line with spray head, manometer, yeast plug Periphery: own temperature control

Condition: new, Year of construction: 2025, Safo DNAA 160 Finished product diameter 40-160 mm New machine tool. Bwsdozxhatopfx Albjt

Condition: used, Year of construction: 1991, 2 vertical stainless steel tanks with dished bottoms, shell cooling zone, manhole, sampling tap, insulation and central outlet. Additional title: 2 insulated, coolable tanks Volume: 44361 l Operating pressure: 0,9 bar Bedpfx Aeztya Ujlbowt Operating temperature: 20 °C Material: stainless steel Position: vertical Base construction: cylindrical tank with dished bottoms, placed an 4 square tube feet Features: insulated, covered, 1 cooling zone (183 l, 0.9 bar), manhole, safety valve, CIP pipe with spray head, manometer, yeast plug Periphery: own temperature control

Condition: new, Year of construction: 2026, rebar bending machine evo 36 400 Volt 50 Hz 3 ph. capacity up to 36 mm at R=65kg/mm2 weight 320 kg with 6 round tooling 50-60-70-80-95-120 mm 1 pc. square bolt foot pedal Bedpfshiyadox Albowt CE declaration

Condition: used, Bar loading magazine for multi spindle automatic lathe, new Manufacturer: Giovanni Cucchi Machine type: Bar loading magazine for multi-spindle Type: CMSP/CMSPF Design: Side loader as surface loading magazine or bundle loading magazine CMSP / CMSPF at a glance: Proven technology - in use for decades The material feed of this loader generation is carried out by the loading magazine. Bar loading magazines CMSP/CMSPF are mounted on rails, so they can be easily disconnected from the machine at any time by unlocking them at the quick release. These magazines do not require bar tubes on the machine and are screwed directly to the machine. It is possible to work in automatic mode as well as in manual mode. The magazine is mounted on rails, so it can be easily disconnected from the machine at any time by the operator by unlocking it on the machine. To change bar diameters, only the clamping sleeves of the magazine are changed. The centering unit adjusts itself to the new diameter by itself. It dampens all kinds of vibrations during machining (suitable for round, square and hexagonal material!) and prevents the bar from forming an arc in the channel. This allows very high speed machining (even with larger diameters). Quick changeover to the next diameter to be machined and a significant reduction of vibrations, due to the proven double centering, are only two of the many advantages of this system. Bwodpfeft Ti Tsx Albot The advantages of CMSP/CMSPF barfeeders at a glance: - short loading time - optimal guiding of the bar material by double or, if necessary, triple centring device - no oil flooding - dry running - quick change of the diameter to be machined - short design - space saving - very low wear of the guide channel - self-adjusting centring device - significant reduction of vibrations Please, contact us for getting more information and pictures on mail(at) or *

Condition: good (used), pressure 100 t punching cross-cut in cmm 40.0 in 22.0 mm ST stroke 120 mm column arm 760 mm total power requirement 8.5 kW weight of the machine ca. ca. 3.800 kg dimensions of the machine ca. ca. 2500 x 1700 x 2000 mm Original price, including stop system: approx. 45.000 euros Special price available upon request Features: - Robust / heavy-duty hydraulic hole punch - Punch stroke continuously adjustable - NC stop system "MUBEA MATIC 82" * Travel range in X and Y axes * With "FAGOR" control unit Bwodpfx Alozn Ahkebst * Includes large support table * Separate control cabinet - Various (custom) punching tools (see Figure 9) - Front safety guard, including sheet metal scraper - 1 freely movable foot switch - Operating instructions for machine and stop system

Condition: good (used), Die holder, notching tool, punching tool, punch, punch die, punch stamp, -Manufacturer: Mubea, punching tool Ø 75 mm -Type: Mubea 75 5-9 Mount Ø 50 mm -Matrix: Ø 150 mm -Overall dimensions: Ø 150 x 120 mm Bodsiqhgqepfx Albewt -Weight: 6.6 kg

Condition: good (used), Die holder, notching tool, punching tool, punch, punch die, punch stamp, -Manufacturer: Mubea, punching tool Ø 60 mm -Type: Mubea 60 5-12 Mount Ø 50 mm -Matrix: Ø 150 mm -Overall dimensions: Ø 150 x 120 mm Bwedpeiqhguofx Albet -Weight: 6.7 kg

Condition: new, Year of construction: 2026, Rebar Bender IB 36 - solid construction - turning table - manual and automatic mode Bsdpfx Alsdibzvobswt - Pre selection of bending angle 3 piece - 2 sideholders - with foot pedal for left and right bending Technical Details: bending capacity 500 N/mm² 28 mm Dimensions 800x900x800 mm weight 350 kg motor 3,0 KW bei 400 V 50 Hz 3 phase

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 250206, total width: 550 mm, total length: 1,500 mm, total height: 850 mm, empty load weight: 300 kg, Export is possible. Bwedpfx Ajyw N Rgjlbst

Condition: used, Year of construction: 2022, operating hours: 360 h, functionality: fully functional, machine/vehicle number: 521080, total height: 3,780 mm, total length: 10,800 mm, total width: 5,160 mm, volume flow: 27,000 m³/h, type of input current: AC, inner dimension height: 3,000 mm, inner dimension length: 10,000 mm, inner dimension width: 5,000 mm, input voltage: 400 V, space requirement height: 3,780 mm, space requirement length: 10,800 mm, Equipment: cabin, documentation/manual, emergency stop, lighting, DURST combined painting and drying system D-LTA 30/30-ü-natural gas – Year of manufacture 2022 For sale is a high-quality combined painting and drying system from the manufacturer DURST, type D-LTA 30/30-ü-natural gas, year of manufacture 2022. The system is in very good and well-maintained condition and is suitable for the professional processing of both conventional and water-based paints. It can be used flexibly in spray and drying operations and features a powerful supply and exhaust air system, natural gas heating, heat recovery, and a modern PLC and frequency inverter control system. Technical highlights and features: • Manufacturer: DURST Lackier- und Trocknungsanlagen GmbH • Type: D-LTA 30/30-ü-natural gas • Year of manufacture: 2022 • Design: combined painting and drying booth • Booth internal dimensions: approx. 10,000 × 5,000 × 3,000 mm • Booth external dimensions: approx. 10,800 × 5,160 × 3,080–3,780 mm • Air flow rate: approx. 27,000 m³/h for both supply and exhaust air • Motor power of ventilation: 2 × 11 kW • Total electrical connection: approx. 25 kW • Heating power: up to approx. 250 kW Bedpfxozubtle Albswt • Heating: direct gas surface burner, natural gas • Drying temperature: up to approx. 70 °C • Air changes: approx. 180 times • Air velocity: approx. 0.50 m/s • Heat recovery via cross-flow heat exchanger • Manufacturer's specification for heat recovery: approx. 47 % efficiency on average per year, up to approx. 80 % recovery factor under optimal conditions • DURST EcoTronic system with frequency-controlled fan control • Operating modes including spray operation, partial load operation, stand-by operation, and hall heating operation • HPS heating program control for efficient drying, especially for water-based paints • PLC control with frequency inverters and monitoring devices • Remote maintenance module • LED ceiling lighting, Ex-Zone 2 • Illumination level approx. 1,090 Lux • Rear extraction wall with paint mist separator • Pre- and post-filtration of the supply and exhaust air • Partial filter ceiling with fine dust filtration • Sectional door and two partially glazed emergency exit doors • Insulated, double-walled booth housing with 80 mm mineral wool panels In spray operation, the system operates in fresh air/exhaust air mode. The drawn-in fresh air is filtered and heated via the gas surface burner. The exhaust air is passed through the paint mist separator and post-filtration. In drying operation, the system operates primarily in recirculation mode with a fresh air proportion of approx. 10 %. The integrated HPS control system enables energy-efficient and uniform drying and is particularly interesting for processing modern water-based paints. Another significant advantage is the integrated heat recovery system, which allows a considerable amount of the heat contained in the exhaust air to be fed back into the process. The system dates from 2022 and is in very good condition. Due to the generous booth dimensions, the high air flow rate and the extensive control and energy technology, it is ideally suited for industrial and commercial painting applications. Further technical documents and documentation for the system are available and can be provided upon request.

Condition: good (used), We offer tanks for storing liquids of all kinds. Example image: 50,000 liters, multiple units available. As long as the ad is online, the tanks are available. If you are looking for a different size or require modifications to the tank, please contact us. Diesel, heating oil, used oil, liquid fertilizer, Ad-Blue, molasses, firewater, drinking water... Above-ground and underground tanks, Horizontal and vertical tanks, Mobile tank systems, Bwodpfx Aljffmq Esbet Single- and double-walled tanks, Tanks made of steel, GRP, PVC... Blasting and coating services can be offered. Transportation can be arranged as an option.

Condition: good (used), Die holder, notching tool, punching tool, punch, punch die, punch stamp, punch die -Manufacturer: Mubea, die Ø 90 mm -Type: Mubea 90 Mounting Ø 50 mm -Dimensions: Ø 90 x 115 mm -Weight: 3.4 kg Bodsiqhg Uopfx Albjwt

Condition: used, Year of construction: 1980, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 1,200 rpm, spindle speed (min.): 15 rpm, spindle mount: MK 5, throat depth: 2,000 mm, quill diameter: 76 mm, quill stroke: 600 mm, type of input current: three-phase, total length: 4,040 mm, total height: 2,900 mm, table width: 900 mm, input voltage: 380 V, total width: 2,800 mm, table length: 1,200 mm, drilling depth: 600 mm, rotational speed (max.): 1,200 rpm, rotational speed (min.): 15 rpm, spindle diameter: 80 mm, feed length W-axis: 600 mm, rapid traverse X-axis: 3,450 m/min, rapid traverse Y-axis: 3,450 m/min, rapid traverse Z-axis: 3,450 m/min, Equipment: documentation/manual, SORALUCE ALF 80 A Universal Drilling and Milling Machine Year of manufacture: 1980 · Heidenhain ND70 · Extensive original documentation For sale is a robust and versatile SORALUCE ALF 80 A universal drilling and milling machine, manufactured in 1980. The machine is suitable for demanding drilling, reaming, and milling operations, as well as for machining larger and heavier workpieces. Due to its solid construction, the ALF 80 is particularly suitable for classic machine, plant, steel, and special machine construction. The machine features a Heidenhain ND70 position indicator. Extensive original operating instructions and technical documentation from SORALUCE are available. Equipment / Accessories In addition to the machine, the offer includes an extensive accessory package, so that the SORALUCE ALF 80 A can be used for various machining tasks. Among other things, the following are included: Large, solid clamping angle for vertical or angular clamping and machining of workpieces Extensive selection of tool holders and tool attachments Various clamping devices Additional existing tools and machine accessories Heidenhain ND70 position indicator Original SORALUCE operating instructions Technical documentation Foundation and installation documents The large clamping angle can be seen in the machine photos. Thanks to the extensive accessories, the machine offers a significant practical added value compared to a machine without the corresponding tool attachments and clamping devices. The exact scope of the accessories can be viewed during an inspection. On request, further detailed photos of the accessories can be provided. Technical data Manufacturer: SORALUCE Model: ALF 80 A Machine type: Universal drilling and milling machine Year of manufacture: 1980 Machine no.: 55/5-110 Travel distances / Working area Cross travel: 1,600 mm Longitudinal travel of table: 1,100 mm Longitudinal travel of table without steady rest: 1,400 mm Vertical travel: 1,200 mm Longitudinal travel of drilling spindle: 600 mm Largest distance between spindle and steady rest: 2,000 mm Work table Useful area: 900 × 1,200 mm Spindle Drilling spindle diameter: 76.2 mm Spindle diameter for milling: 128.57 mm Tool holder: Morse taper MK 5 Number of speed stages: 24 Speed range: 15–1,200 rpm Feeds Drilling spindle / Faceplate: 9 feed stages 0.036–2 mm/rev Spindle box / Slide: 9 feed stages 0.072–4 mm/rev Rapid traverse: Bedpfx Aszl Rqholbjwt Drilling spindle / Faceplate: 600–1,725 mm/min Spindle box / Slide: 1,200–3,450 mm/min Faceplate Design: detachable Diameter: 430 mm Largest face turning diameter: 750 mm Adjustment of face turning slide: 150 mm Motorization Main brake motor: 10 hp Coolant motor: 0.25 hp Dimensions and weight Overall length: 4,040 mm Overall width: 2,800 mm Overall height: 2,900 mm Net weight: approx. 9,200 kg Equipment / Accessories Heidenhain ND70 position indicator Original SORALUCE operating instructions Technical documentation Foundation and installation documents Available accessories and tools for the drilling machine, by arrangement Due to its solid, heavy construction, the machine is of particular interest to companies that are looking for a reliable conventional drilling and milling machine for large workpieces. Inspection possible by appointment. We will gladly provide further photos, technical documents and detailed information.

Condition: used, Die holder, notching tool, punching tool, punch, punching die, punching punch, Bedpfx Aeiqhhrolbowt -Manufacturer: Mubea, punching tool square Ø 55 mm -Type: Mubea 55 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 6,7 kg

Condition: used, Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square 95 x 95 mm -Type: Mubea 95 holder Ø 50 mm Bodpoiqhhyjfx Albswt -Die: Ø 200 mm -Total dimensions: Ø 200 x 122 mm -Weight: 11.6 kg

Condition: used, Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 70 mm Bwsdpjiqhiajfx Albst -Type: Mubea 70 5-10 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 6.6 kg

Condition: used, Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool Ø 60 mm -Type: Mubea 60 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm Bodpfx Aeiqhhkjlbjwt -Weight: 6.6 kg

Condition: used, Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 90 mm -Type: Mubea 90 5-8 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 116 mm -Weight: 6.7 kg Bwedoiqhhnepfx Albet

Condition: used, Die holder, notching tool, punching tool, punch, punching die, punching punch, Bsdpfx Ajiqhh Ijlbowt -Manufacturer: Mubea, punching tool square Ø 52 mm -Type: Mubea 52 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 125 mm -Weight: 6,8 kg