Used Kusing Rs-Es-800 for sale (20,718)

Condition: new, maximum load weight: 56,570 kg, overall weight: 66,500 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle stock, with vehicles available for immediate and short-term delivery, on our website. Extract from the equipment list. Full specification available on request. Chassis: * Chassis frame construction with welded longitudinal beams and through-running cross members * Rear underrun bar approximately 700 mm wide * Fifth wheel plate at least 8 mm thick, fitted between the longitudinal beams * Maximum cross member spacing 400 mm (for longitudinal floor installation) * 3.5-inch kingpin according to SAE standard, replaceable * Outer frame as UNP 200, open to the outside Landing Gears: * 24 t JOST - MODUL CH (Heavy Duty) telescopic landing gear with S-foot Axles: * 4 x 10 t SAF axles with large drum brakes * 22.5 single tires * Axle spacing approx. 1,700/1,810/1,810 mm * Air suspension unit with 10 t load capacity each, lift and lower device with 1 rotary valve Knorr/Wabco * Holder for lift and lower device, bolted design Braking system: * Smartboard/TIM/Infocenter at the lift/lower holder, additionally to the lift/lower valve, without battery (operable only with towing unit) * Mount for light and brake at the front underrun bar, total height approx. 700 mm * Basic version tire pressure monitoring, connected to CAN bus system of the EBS * With double-release valve for brake and spring brake actuator * Test port for brake cylinder pressure on the front right brake cylinder * 1 red and 1 yellow coupling head each * Lift and lower device mounted at rear left in driving direction * EBS braking system by Wabco, EBS diagnostic via CAN bus (EBS plug), no external diagnostic cable! Tyres: * 8 x 445/65 R 22.5 – premium brand of our choice * Centering rings Lubrication: * Grease nipple strips at the bogies and front steering, no central lubrication Superstructure: * Without body certificate according to DIN EN 12642 XL * 2x LED work lights on top of front wall (facing rear), switch at lift/lower holder * Front wall for platform design, heavy duty * Side outline marking yellow, rear yellow * Front wall approx. 800 mm high, with metal cladding, bolted Lighting: * 2x LED work lights fitted in lamp panel, controlled by reverse gear * 2x LED work lights, controlled by reverse gear, one each side near the landing gear * 2x LED reversing lights, one each side in front of first axle * Lighting/wiring system, brand of our choice * Number plate illumination * The towing vehicle must supply sufficient power for the selected lighting (especially reverse light) * Position lights front, bottom, white, one each side (LED) * 24 volt lighting system with large multifunction light * Flashing side marker lights (LED) Cjdewx Dctjpfx Afgshc * 1x 15-pin and 2x 7-pin connections at the front via multifunction box * EBS socket * 1 pair of lane marker lights (LED) Floor: * Hardwood floor approx. 28 mm thick, alternately with galvanized omega steel profiles Paint/Coating (no metallic finishes): * Chassis painted in RAL color of your choice, front wall (steel construction) in RAL color of choice * Axle hubs in chassis color * Axles and landing gear black * Wheels in aluminum/silver similar to RAL 9006 * Wheel nuts untreated * Underrun protection painted RAL 9010 pure white (aluminum) Accessories: * Lifting device for 1st axle * 9 lashing plates welded into the outer frame per side, lashing capacity max. 3,000 daN * 12 RUD-SLP lashing points per side with

Condition: used, maximum load weight: 11,960 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2018, loading space length: 7,560 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, loading space volume: 47 m³, Equipment: ABS, Schuh ASZ 18007 Refrigerated Box Bi-Temp. Thermo King 48m³ Pass-Through System Tandem Internal number for inquiries: 0525439 * Body manufacturer: Schuh * Type: ASZ 18007 * Own weight: 6,040 kg * Refrigerated box * Bi-temperature * Thermo King * Pass-through system * ABS * EBS * 2 axles air suspended * Aluminum underride protection * Pass-through equipment * Interior lighting * Lashing rail left / right * Rear view camera pre-installation Dimensions (cargo area/loading area) Cargo length: 7,560 mm Cargo width: 2,480 mm Cargo height: 2,500 mm Tires: Codpfswqaglex Afgshc * Front axle: 385 / 65 R 22.5 air suspended / 35% * Rear axle: 385 / 65 R 22.5 air suspended / 35% ---- Price: 13,900 Euro + 19% VAT For further questions you can reach us at the following numbers: We speak: German, English, French and ????? Subject to errors, mistakes, and prior sale.

Condition: new, Siemens 6GF3440-1CD10 MV440 SR optical reader E Stand 5 incl. software V7.0 SN:SVPK5002262, unused in opened original packaging, 100% functional, scope of delivery as per photos Codpfxsxagtnj Afgjhc

Condition: new, Siemens 6SC6500-0BC01 Simodrive 650 FBG spindle positioning E, version D > unused < in sealed original packaging, 100% functional Chjdpfxjxag Ewo Afgsc

Condition: used, SCM M3 double edger, in good condition, 300 mm cutting width, 100 mm cutting height Chedpfexlnpnex Afgec

Condition: good (used), RS-Elektronik #57494 / DBZ 151 0493 854 5061 DRV11J BUS-ANPASSUNG Plug-In Card Cjdovx T R Uspfx Afgehc We have 12 pcs in stock. Price is for one pc only.

Condition: good (used), RS Elektronik 30132-18842 BS Plug-In Card Chsdpfxevx T Uts Afgsc We have two pcs in stock, price is for one pc only.

Condition: like new (used), amount 1 Set Year unbekannt Jahr weight 0 kg Codpjvx Uznjfx Afgohc

Condition: as good as new (ex-display), feed length X-axis: 800 mm, planing width: 800 mm, Double-sided planer. In very good working condition. Chedpfx Afex Rrykjgjc

Condition: new, color: grey, Field of application: Mining Empty weight: 32.000 kg Dimensions (LxBxH): 2200 x 310 x 430 cm Tyre size on axle rear: 225 Tyre tread remainder on axle rear: 100% MOBILE SAND MAKER Cedsyh Hngepfx Afgshc Feeding Hopper : 10 m3 Crusher Feeding Belt Conveyor 800*9000mm VSI700 Vertical Shaft Impact Crusher 132kw Vibrating Screen 2 Decks 1600x5000mm 11 kw Feedback conveyor 600*8000mm Stockpile Conveyors 600*8000mm Mobile Chassis 2 Axles-Compacible With EU Road Regulations Automation -PLC- with Tablet and PC Controlled Industrıal Paint on 1 Layer Linings-120-140 Micron- Barriers-Ladders-Platfroms Galvanised PLANT DETAIL Production Capacity 40-60 tph 0-5mm Maximum Feeding Size 50mm Feeding Height 3.8 meters Main Configuration VSI Crusher + Vibrating Screen Total Motor Power 165 kW Electric Generator Requirement 350 kVA Weight of the plant 31 Tonnes Sizes of the plant 14(L) x 3 (W) x 4.2(L) meters Chassis Type Single chassis on wheels Production Capacity 100-150 tph Maximum Feeding Size 50mm FEEDER PROPER FOR HEAVY DUTY Dimensions : 900x4100 mm Bunker : 15 m³ Capacity : 150 to 200 tons / hour Grid Length : 1160 mm Main Body Sheet : 20 mm. Weight : 5.5 tons. Number of springs : 111 ea Type of Bypass : Flat grid type (throttle transfer) Grill casting : 16-18 mn. 1,5 cr. Type of Bunker : With flat ramp climbing Anchorage slots : pin click - fit Bypass chute : With rear additional saddle 2-Model : VSI 700 -CR Max Feed : 35 mm. Hard Condition Rotor Diameter : 760 mm. / Off Std. Rotor Rotor Speed : 50-70 m / s. Drive : 132 kW / 1500 rpm. Capacity : 40-60 tons / hour 0-5 sand production at 5-32 mm feed. Total Capacity : 80-120 tons / hour Weight : 8,500 kg Rotor Diamond Inserts (Two-row - 6 pcs Ductile Iron Tungsten Carbide Tipped) Other Wear Parts (2 Molybdenum, 22 Chrome Alloy Castings) Electric Motorized Hydraulic Unit (Used for Belt tensioning and Upper Body Lifting.) One-sided maintenance platform with ladder. Drive pulley for two separate speeds (1400 rpm - 1600 rpm) Vibration sensor switch Maintenance Crane Crusher Feeding Belt conveyor Rated sizes : 800 x 9000 mm Motor power : 7 kw 1500 d/d Power Transmission : Motorized Reducer Drive drum : 273 Vulcanized Rubber Coating Tail drum : Angle process over pipe Body Construction : Sheet Metal Body Rubber Tension System : SNH type sliding bedding Carrier : triplet assembly pedestal Group of turning roll : single hanger system Type of reducer : İ-MAK reducer Band rubber : 5 layers of 10 mm EP-125 eksaş conveyor Drive bearings : UCF type with...

Condition: new, axle configuration: 2 axles, Year of construction: 2021, Equipment: ABS, Technical data for the EBERT TLS 43 ATV special low-loader: Permissible fifth wheel load: 19,000 kg, Permissible axle load: 24,000 kg, Permissible total weight: 43,000 kg, Unladen weight according to DIN: approx. 12,500 kg, Low-bed length i.L.: approx. 6,650 mm + 4,000 mm, Axle center distance: 2,700 mm, Outer width: 2,550 mm, Loading edge/low-bed: approx. 200 mm, 350 mm, Sliding table length: 500 mm, Widening/low-bed to: 3,050 mm, Low-bed/telescopic extension: 4,000 mm, B-dimension: 12,000 mm, Entire vehicle hot-dip galvanized, with epoxy resin primer and 2-component paint finish, Overwidth signage at the front and rear with red/white panels Wheels: 9x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F Steering: TRIDEC DLS with Tritronic Axles: 12,000 kg – DLS single-wheel suspension, hydraulically steered and hydraulically sprung Front upper deck: Doors accessible from the outside in the corners on the left and right, storage box with lid behind the front panel, height 600 mm, width 2,480 mm, depth 7,500 mm, spare wheel on the upper deck, behind the partition on the right, ladder on the right side to access the front upper deck from the low-bed, hydraulic coupling for detachment on the left side, 6-way Multi-Faster coupling, 6 lashing points, 3,000 kg design, on the outside of the upper deck / eyelets, 2 lashing points, 5,000 kg design, on top of the longitudinal beams (towards the rear) Low-bed: Climbing aids on the boom - extension, low-bed telescopic extension by 4,000 mm and lockable every 500 mm, with sliding table, lockable every 250 mm, 28 lashing points, 10,000 kg design, on the outside in the outer frame, 24 socket tubes 90x90, evenly distributed for widening the low-bed to 3,050 mm, 50 mm hardwood planks are placed between the extension tubes, 10 mm overhang Rear upper deck: Front upper deck slanted and perforated for retrofitting ramps, galvanized by means of adapters, ramp receiver profiles (Altec) – C rails at the rear, 6 lashing points, 10,000 kg design, on the outside of the upper deck, 6 lashing points, 5,000 kg design, in the excavator well, 8 lashing points, 5,000 kg design, in the case of overwidth in the outer frame, closure of the excavator well at the front and rear with a wood-based floor panel (insertable) Electrical system: NATO connector, power supply from the towing vehicle, rotating beacon at the rear in the middle, side marker lights in LED design, standard tail light for vertical mounting (LC5), work lights on the upper deck to illuminate the low-bed, detachment: sensor for securing and pressure switch for the suspension Air: Aluminum air tank 60l (2x 10l, 2x 20l), TEBS modulator, locking mechanism for extension on the left and right (valve on the side in the rear upper deck), double quick-release valve Hydraulics: Hydraulic system on the upper deck for steering, suspension, and detachable gooseneck Chodoyfvwbopfx Afgec Accessories: 2x 4 pieces of wood plank as support for widening the low-bed and intermediate table, 2 pieces of locking wedges for detachment, 4 pieces of support wedges On request, we will provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Ebert (Tel. ) will be happy to assist you. Further information can be found on our homepage. Errors and prior sale excepted! Rental possible = Further information = Unladen weight: 12,500 kg Payload: 30,500 kg GVW: 43,000 kg Contact Tobias Ebert for further information.

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2009, loading space length: 7,000 mm, loading space width: 2,500 mm, loading space height: 2,500 mm, loading space volume: 44 m³, Equipment: ABS, Galliker ST 2A LF Refrigerated Box 44 m³, Tail Lift, Through-Loading System Internal Ref. No. for inquiries: 1225933 * Body Manufacturer: Galliker * Model: ST 2A LF * Unladen weight: 6,200 kg * Refrigerated box * ABS * EBS * Duomatic * 2 axles, air suspension * BPW Eco Plus axles * Aluminum underride guard * Drum brakes * Interior lighting Dimensions (Cargo area/Loading platform) Cargo length: 7,000 mm Cargo width: 2,500 mm Cargo height: 2,500 mm Tires: * Front axle: 435 / 50 R 19.5, air suspension / 35% Chsdpfex U Ithjx Afgoc * Rear axle: 435 / 50 R 19.5, air suspension / 35% ----Price: €8,900 + 19% VAT. For further inquiries, you can reach us at the following phone numbers: We speak: German, English, French and ????? Subject to errors, mistakes and prior sale.

Condition: ready for operation (used), HR-Heligaron T image intensifier CXI-3000 Series & CXI-5600.532-1.024 FOV + CV-M4+CL camera, used, minor signs of use, 100% functional, scope of delivery as per photos Chedpsl Ecimofx Afgec

Year of construction: 2023, condition: new, Cable stripping maschine ,wire stripper Technical Data: Dimensions: W / H / D 75 cm / 68 cm / 86 cm Weight: app. 95 Kg Color: blue / yellow Cutting speed: app. 48 Meter per Minute Engine: 230V / 3000 W Csdpfx Ajk Ra Tuofgohc

Condition: ready for operation (used), DMU SK40 motor spindle with variable speed from 20-12,000 RPM. Serial number: 10222292. Used, shows significant signs of wear, but 100% functional. Scope of supply as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Cedpsk Ru Dkefx Afgohc

Condition: ready for operation (used), Fanuc A06B-6077-H106 Power Supply Module SN EA5615355 the article was checked and tested! ,used, normal traces of use, 100% functional, scope of delivery according to photos Chedpfenkqywsx Afgoc

Year of construction: 2023, condition: new, machine/vehicle number: 6YXXX23, SINC FEROX is the must have machine in scrap business, to reduce the volume or to prepare scrap for baling or just to get it in to size for melting. FREOX alligator shears are available from 300mm up to 1000mm cutting size, as longer the cutting blade, as higher the cutting force. Cjdpomqku Uofx Afgehc The machines are able to operate with pedal, semi-automatic and full-automatic. The option to set the cutting opening is easy solved with the manual limitation. The machines are designed for to have minimal service needs; the blades are reversible to be reused on all four edges.

Condition: ready for operation (used), Rexroth MAD225C-0100-SA-S2-FH0-35-N1 / R911317252 Servomotor SN:7800406280035,used, good condition, 100% functional, scope of delivery as per photos ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Cedpfxotzhf Us Afgshc

Condition: used, mileage: 1,001 km, color: orange, driver cabin: other, gearing type: other, loading space volume: 13 m³, loading space length: 4,600 mm, loading space width: 2,340 mm, loading space height: 1,200 mm, Vehicle location: Bovenden, steel body Body: for 3-axle trucks, approx. 13 m³, hydraulic tailgate. Roof protection. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Codsvhgy Ujpfx Afgjhc

Condition: new, Jointer and thickness planer HOLZKRAFT fs 52es digital TERSA - Exhibition machine - TERSA planer shaft, electric height adjustment, Digital display for planer thickness ----- Technical data ----- Planing width: 520 mm, Thicknessing table dimensions: 850 x 520 mm, table length: 2,250 mm, max. chip removal: 5 mm, planer shaft Ø: 120 mm, Number of knives: 4 pieces, Passage height: 240 mm, min. Workpiece thickness: 3 mm, feed speed: 5 / 8 / 12 / 18 m/min, Speed: 5,000 rpm, Extraction nozzle Ø: 120 mm, Chodpfju R Sztsx Afgoc Motor power 400 V: 9.5 HP / 7.0 kW, weight: 695 kg - new exhibition machine -

Condition: ready for operation (used), Siemens 1FT5046-0AF71-1 AC VSA motor SN: EF186458101002 + Hengstler AC58/1212ES.41SGH encoder, used, normal signs of wear, 100% functional, scope of delivery as per photos Chjdpfx Asvf Amlofgoc

Condition: good (used), Work bench width: 2,860 mm / Height: 900 mm / Work bench depth: 800 mm We are offering a used work bench frame from the manufacturer Vogelsang for sale. Technical data for the work bench frame: Manufacturer: Vogelsang Type: NS The scope of delivery includes: 02x Work bench stands, new Material color: sendzimir galvanized Stand height: 900 mm Stand depth: 800 mm Incl. cross and diagonal braces, base plates The stands are pre-assembled (bolted framework) 04x Work bench traverses, used Material color: orange Box profile: 110 x 50 mm Clear span: 2,700 mm 08x Locking pins, used Design: fully galvanized The images serve to illustrate the material. The material color may vary. - The work benches are supplied unassembled; - The work bench stands are pre-assembled; - The production time is usually approximately 3 - 5 working days. Codpfxshm Sr Dj Afgehc

Condition: new, Fully automated system Energy saving Industry 4.0 Durma Cloud Fiber laser technology Environmental awareness Synchronous, minimal working area High, precise repeatability High process accuracy Compact design Low noise level Simple and fast installation Chsdpfxjg Adn Is Afgsc Upon request, we will send you informational material.

Year of construction: 2015, condition: good (used), machine/vehicle number: 401412, Technical data: - Load capacity: 8000 kg - 3 adjustable lifting chains with hooks, load capacity per chain: 5000 kg - 2 x chain length with hooks, max. approx. 500 mm Cedpsgkam Asfx Afgjhc - 1 x chain length with hooks, max. approx. 2000 mm - 1 x arm length, approx. 750 mm - 1 x arm length, approx. 1200 mm - 1 x arm length, approx. 1400 mm - Lifting arms adjustable laterally - Lifting bracket adjustable in a grid pattern - Dimensions of the crossbar, approx.: L 1800 x W 2200 mm - Weight with chains, approx.: 550 kg

Condition: ready for operation (used), Fagor AC brushless servomotor FXM54.20A.R0.000, version 00, serial no. F 180333, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Chedji D Hvmepfx Afgjc