Used Kardex Remstar Shuttle Xp 500 2650×864 for sale (17,015)

Condition: good (used), Year of construction: 1998, functionality: fully functional, operating hours: 25,000 h, input voltage: 380 V, input current: 35 A, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 180 mm, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,350 mm, workpiece height (max.): 110 mm, workpiece weight (max.): 200 kg, number of axes: 3, number of slots in tool magazine: 4, controller manufacturer: num, total height: 27,000 mm, total length: 5,500 mm, total width: 2,700 mm, overall weight: 4,000 kg, table length: 3,000 mm, table width: 1,100 mm, year of last overhaul: 2024, Equipment: documentation/manual, Well-maintained CNC machining center with low operating hours. Milling unit 6.6 kW ISO 30 with 4-position tool changer Milling unit 6.6 kW ISO 30 MANUAL TOOL CHANGE Drilling unit 10+4 drills Vacuum pump 100 m³ Automatic machine lubrication Table 3000x1100 mm Updated Xilog plus software Refurbished NUM 1040 controller Hnjdpfxeyurwps Agtot

Condition: ready for operation (used), Year of construction: 2022, operating hours: 3,728 h, functionality: fully functional, machine/vehicle number: 0040001634C, turning length: 500 mm, turning diameter: 240 mm, spindle motor power: 1,400 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 6,000 rpm, spindle bore: 170 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 525 mm, travel distance Z-axis: 525 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 22 m/min, rapid traverse Z-axis: 30 m/min, torque: 171,192 Nm, feed force X-axis: 3 N, The DMG MORI CTX Alpha 500 was manufactured in 2022. This versatile turning center is equipped with a Siemens controller and LNZ Quick load servo 80S2. Weight: 4,300 kg. Please contact us for more information about this machine. Hjdoyz S T Sopfx Agtjnt

Condition: used, Year of construction: 2011, machine/vehicle number: IntNr231315, Technical Data – used LNS FOX IFS WS 500 Feature Specification Model FOX IFS WS 500 Year of manufacture 2011 Airflow rate approx. 500 m³/h Motor power approx. 0.37 kW Voltage 400 V / 50 Hz (typical) Hnsdpfxozx Rv Ds Agtot Weight approx. 35 kg Dimensions approx. 465 × 500 × 1,145 mm (W×D×H) Filter stages 1. Pre-filter F5 2. Centrifugal separator 3. Post-filter F5 (optional HEPA H13) Filtration efficiency 99% at ≥ 1–2 µm (F9), optionally HEPA 99.95% at ≥ 0.1 µm Noise level approx. 65 dB (WS2 mod. similar) Accessories & Features • Compact design for direct installation on or beside CNC machines • Stand for extraction • Three-stage cleaning for effective oil and coolant mist separation • Cartridge filter can be retrofitted with HEPA kit • Easy maintenance, low noise operation, and long-life filter elements Subject to technical changes, errors and prior sale!

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, We offer you: Manufacturer: GGF / MAG Type: SPECHT 500 DUO Year of manufacture: 4 x 2011 / 1 x 2014 Control system: Siemens 840D sl Technical data: Travel distances: X-axis: 750 mm Y-axis: 650 mm Z-axis: 560 mm Main spindle: Spindle speed: max. 16,000 rpm Drive power: 40 / 26 kW Table dimensions: Working area diameter: max. A 1,100 / B 710 mm B-axis table plate diameter: 2x 450 mm Load weight: max. 2x 290 kg Tool changer: Tool holder: HSK-A63 Feed rates: Axis speed: max. 60 m/min Hsdpfszl D Hvjx Agtjnt A total of 5 machines are available. 4 units manufactured in 2011, 1 unit manufactured in 2014. Accessories, tools and clamping devices shown in the images are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information, as well as prior sale!

Condition: ready for operation (used), Year of construction: 1995, punching force: 22 t, total height: 2,300 mm, total width: 6,000 mm, sheet thickness (max.): 6 mm, overall weight: 11,050 kg, product length (max.): 6,900 mm, number of axes: 2, CNC punching machine manufactured in 1995. This TRUMPF Trumatic 500 features a maximum punching force of 220 kN, accommodating workpieces up to 150 kg. It offers a working range of 2500 mm along the X-axis and 1250 mm along the Y-axis, allowing for efficient processing of various sheet sizes. If you are looking to get high-quality punching capabilities, consider the TRUMPF Trumatic 500 machine we have for sale. Contact us for further details regarding this machine. • Condition: In working condition; normal signs of use (scratches/dirt, especially near punch head); floor wear visible • Max sheet thickness (steel): 6 mm • Note: Current tooling set is suitable for up to 1.5 mm sheet thickness • Max punch diameter: 76.2 mm • Max workpiece weight: 150 kg • Working range: X = 2500 mm without repositioning (4 m sheets previously processed using repositioning/extension tables); Y = 1250 mm • Axis speeds: X up to 90 m/min; Y up to 60 m/min • Stroke rate (nibbling): up to 900 strokes/min Hnjdpfxjz Azuro Agtot • Table/Design: Flat perforated work table; mechanical punching head with hydraulic/pneumatic lines; long material support arm; control panel on cabinet with display, controls, and emergency stop • Utilities: 400 V / 50 Hz / 3-phase; connected load approx. 17 kVA; compressed air 6 bar Additional equipment • Large set of punches, dies, and tool holders (complete tooling set) • Large metal cabinet with shelving for tool storage • Metal scrap container on casters (under-table)

Condition: excellent (used), Year of construction: 2004, operating hours: 76,085 h, functionality: fully functional, machine/vehicle number: 196531, clamping force: 500 kN, screw diameter: 25 mm, clearance between the columns: 320 mm, displacement volume: 49 cm³, injection pressure: 2,240 bar, injection weight: 45 g, mold height (min.): 200 mm, ejector stroke: 125 mm, opening stroke: 350 mm, overall weight: 2,300 kg, heating capacity: 4.9 kW (6.66 HP), pump power: 15 W, power: 19.9 kW (27.06 HP), Year of manufacture: 2004 Hnedpfx Asx Rq Rnegtet Clamping force: 50 tons Distance between columns: 320 x 320 mm Screw diameter: 25 mm Injection volume: 49 ccm Injection weight: 45 g for PS Equipment: 2 x core pull, handling interface, interfaces for hot runner systems Fully inspected! PRICE REDUCED FROM 7000 TO 5950 EUR!!!

Condition: excellent (used), Year of construction: 1999, operating hours: 686 h, GILDEMEISTER lathe NEF plus 500 with Heidenhain Manual Plus control. In like-new condition. Hsdpjz Afc Tefx Agtjnt

Condition: good (used), Year of construction: 2006, radial fan, dust extraction blower, fan, extraction, dust blower, blower -Manufacturer: Airheat, radial fan with soundproof housing -Type: RDH-500-11.0 -Volume flow rate: 20000 m³/h -Motor: Hoyer 15 kW 1460 rpm -Dimensions: see technical drawing in the photos -Overall dimensions: 1800/1110/H2900 mm Hedpfjzwdn Dox Agtjnt -Weight: 584 kg

Condition: used, The GEA oil fryer is used for flash or deepfrying coated and uncoated products. It is suitable for meat, fish, poultry, cheese, vegetables, potatoes and vegetarian dishes. all stainless steel electrically heated 72 kW heating capacity 75 kW total connected power net frying length : ± 3.000 mm net belt width : ± 500 mm in- and outfeed belt teflon infeed belt adjustable speed sediment removal system filter suitable for fire protection mechanical hoists Hsdpozz H Saefx Agtsnt dimensions (l x w x h) : ± 6.300 x 1.700 x 3.100 mm

Condition: used, Year of construction: 2008, Format: 550 mm Speed: 120 Tacts er minute Equipment: Kallfass Universa 500 Servo Fully automatic, continuous side welding machine Type: Hybrid side sealer with continuous product flow Product Feed:Simple feeding system, compatible with products of different lengths and automatic production lines Transport:Vacuum conveyor belt Motion Control:SIEMENS?? SIMOTION?? with servos for all product-related drives Operator Interface:SIEMENS TP 270 touch panel Operation Mode:Continuous product flow with intermittent cross-sealing Kallfass Compact 650 D High-Performance Energy-Saving Shrink Tunnel Type:High-performance energy-saving shrink tunnel Hnsdpfx Ajzpghwogtet Heating System:Patented ring nozzle heating system in double design Blower:Frequency-controlled, Zolltornado-style Zoll hot air flow for uniform shrinking Transport:Maintenance-free plastic modular belt, continuously adjustable speed Film Compatibility:All polyolefin films Safety:Safety equipment according to EC directive EN 60204

Condition: used, turning diameter 3.200 mm turning diameter modified: 2.400 mm turning diameter over slide 3.000 mm turning length max. 15.000 mm control Sinumerik 840 D Siemens workpiece weight max. 80.000 kg work accuracy (up to) 0,01 mm turning speed range - main spindle max. 50 min/-1 weight of the machine ca. 154,4 t dimensions of the machine ca. 20,7 x 6,0 m Heavy Duty Lathe ZERBST - DXP 5 / W15x15000 Hedpfx Aowtrz Hogtent - measurement precision: < 0,01 mm Retrofit 2009 / 2012: - 2009: Control system upgrade to Sinumerik 840D - 2012: - New main gearbox, incl. main spindle drive - Installation of holding brake, incl. electrical integration - Modification and optimization of cylindrical roller bearings/bearings - Modernization: Control and safety technology

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Urban ESB 500 corner and scissor drilling unit with drill heads for Siegenia fittings Hsdsyza Dfjpfx Agtent

Condition: not inspected (used), functionality: fully functional, spindle bore: 65 mm, turning diameter: 500 mm, power: 10 kW (13.60 HP), manufacturer: Tool Factory Budapest type: EU500/1500 turning length: 1500mm turning diameter: "over bed": 500 mm above cross slide: 315 mm Hodpfxjqwlmqj Agtjnt revolution: 18 degrees. speed range: 25-1250 rpm main spindle hole: 65mm spindle bore: 63mm tip holder insert sleeve cone: 72 metric lathe tip taper: morse 5. main engine power: 10kw mains voltage 3 phases 380V 50Hz machine length: 3400mm total width of the machine: 1210mm height: 1265 mm machine weight: 3550 kg

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, power: 0.67 kW (0.91 HP), input voltage: 400 V, We are selling a Voran-brand press, including accessories. It processed approximately 40,000 liters per year. It is in good condition. Technical data is available on the manufacturer's website, Voran. On-site inspection is possible in the Plzeň region, Czech Republic. If you are interested, please send me a message. I do not speak English. Hnedpfx Agexndyzotjt

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Completely Refurbished OPS Ingersoll Gantry 500 Eagle Die-Sinking EDM Machine – Excellent Technical and Visual Condition The machine has undergone a comprehensive, professional refurbishment in our facility and is in outstanding technical and cosmetic condition. During the overhaul, the machine was disassembled by more than 70%. All relevant wear parts, including ball guides and drive spindles, were thoroughly inspected and replaced where necessary. This was followed by a complete geometric measurement, alignment, and additional verification using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. Every hose, including hydraulic and pneumatic lines, was completely replaced. Furthermore, the machine has been fully repainted and visually presents itself in an impeccably maintained state. The generator and control system were cleaned and technically tested. The generator’s cooling unit was also cleaned to ensure reliable cooling and consistent operation. Finally, the machine underwent an extensive EDM test in accordance with OPS Ingersoll's quality and testing standards. The machine is immediately available and is ideally suited for reliable production use. Technical Data: Manufacturer: Ingersoll (OPS Ingersoll) Die-Sinking EDM Machine Model: OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture: 2009 Control system: EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn – quick programming Powertec Handheld – multifunctional manual control device Manual eroding via Powertec Handheld High-Speed Jump: max. 18 m/min Generator output: 60 Ampere, EAGLE Powertec Travel paths (X, Y, Z): 525 x 400 x 450 mm Electrode changer: 20-position pick-up carousel Work tank (W x D x H): 770 x 670 x 440 mm Worktable (W x D): 750 x 650 mm Load capacity: 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Hnjdpfxsyzw I Ie Agtet Special features: Linear measuring system on all axes (Z axis standard in series)

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, CNC Horizontal Lathe Hodswvrfkopfx Agtjnt Mori Seiki NL2000Y/500 Year 2012 Controller : MAPPS III Max Swing Ø923mm Max over cross slide Ø755mm Max Turn Ø356mm Bar Capacity Ø65mm Travel X260mm / Z590mm Y +/-50mm Spindle Speed 5000rpm Turret 12 stations Max. milling speed 6,000rpm Chip conveyor Stock Clearance at 39.000EUR ONLY

Year of construction: 2015, operating hours: 780 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: sn:CAI858663, ALUP Sonetto 15 500 Screw Compressor for Sale – Reliable Industrial Unit – TOTAL OPERATING HOURS: 780!!! For sale: ALUP Sonetto 15 500 screw compressor in good working condition, suitable for continuous industrial use. Key technical specifications: Power: 15 kW Air receiver: 500 liters Working pressure: 8–10 bar Air delivery: approx. 1.8–2.4 m³/min Type: tank-mounted screw compressor Cooling: air-cooled Control: integrated electronic controller Condition: Operating hours: 780 Regularly maintained / serviced Oil and filters: replaced at last service Currently operational / available for testing This compressor delivers reliable and stable performance, ideal for workshops, industrial applications, and automotive service environments. Additional information: Location: Gyor / Hungary Transport/shipping can be arranged if needed Price: 7,700 EUR (negotiable) Hjdsyzhmbopfx Agtsnt For further information, feel free to contact by phone or message.

Condition: like new (used), Year of construction: 2014, functionality: fully functional, crusher SG - 500/200 - the crusher is completely overhauled and ready for operation Hnodpfowhw Iuox Agtst - the crusher is also equipped with a vibrating conveyor 8 m long with a separation where sawdust is separated and equipped with a magnet with metal detection in the attachment you will find technical parameters for the machine ¨ - electrical switchboard for the machine.

Condition: good (used), Year of construction: 2001, operating hours: 28,000 h, spindle speed (max.): 3,600 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 930 mm, Manufacturer: Spinner Model: MC 500/1000 Year of manufacture: 2001 Control system: Siemens SINUMERIK 810D Hodpfxjztpvfj Agtjnt Turning spindle: 3600 rpm, 11 kW, 172 Nm Technical features: Turning spindle: 3,600 rpm, 11 kW, 172 Nm 12-position tool turret (VDI 30) Hydraulic steady rest, base body manual – MK4 Hydraulic chuck, Ø 250 mm Chip conveyor Coolant pump C-axis: 360° Travel distances X-axis: 210 mm Z-axis: 930 mm C-axis: 360°

Condition: excellent (used), functionality: fully functional, We offer a highly productive 3D printer for industrial series production. The system was finally used with AISi10MG aluminum powder. The 3D printer has already been disassembled by the manufacturer. Disassembly and functional reports are available, proving that the machine was in operation prior to disassembly. All axes are properly secured. The machine can be transported on a standard truck. TruPrint 5000 G4 Serial number S0731C0008 Year of manufacture 08/2018 Hnsdpfxovu Syys Agtjt Laser runtime Laser 1 beam on: 5165 hours Laser 2 beam on: 5096 hours Laser 3 beam on: 5023 hours Trumpf TruPrint 5000 with the Powder Bed Monitoring and Melt Poll Monitoring options, including a filter system. Accessories: 2x build cylinders 3x Dosing cylinder 1 used overflow tank 1 new overflow tank Manuals 4 new heat exchangers 2 new Easy Filters 3 new NTRON SIL02 Oxygen Analyzers + Sensors 1 new oxygen sensor and much more, such as seals, etc. The Armanni CAR.Elev. pallet truck for changing the tanks is also in stock and can be offered as an option. Get high-quality 3D components faster The highly productive, semi-automated TruPrint 5000 3D printing system prepares you for industrial series production. With features such as an optional 500°C preheater and full-field multi-laser configuration with three 500-watt TRUMPF fiber lasers, you are ideally equipped for the most demanding industrial applications. The machine produces high-quality components from a variety of metallic materials quickly and reliably, meeting the high quality standards in tool and mold making, including 3D printing on preform blanks, in the aerospace and medical technology industries. Optionally, the entire process chain can take place in a protective gas atmosphere: screening, printing, cooling, and depowdering. Combined with external parts and powder management and monitoring solutions from TRUMPF, it is ideal for industrial additive series production. Thanks to the Preform option, the TruPrint 5000 supports hybrid component production. The component structures to be additively manufactured are applied to a blank. This innovative option is particularly well-suited for easy handling in tool and mold making. TruPrint 5000 Build volume (cylinder) mm x mm Ø 300 x H 400 Ø 290 x H 390 (Reduction if preheating >200 °C) Processable materials[1] Weldable metals in powder form, such as: stainless steels, tool steels, aluminum, nickel-based, or titanium alloys Build-up rate[2] cm³/h 5 - 180 Layer thickness[3] μm 30 - 150 Max. laser power at the workpiece (TRUMPF fiber laser) W 3 x 500 Beam diameter[3] μm 100 - 500 Min. measurable oxygen content ppm Up to

Condition: excellent (used), Year of construction: 2022, operating hours: 6,500 h, functionality: fully functional, For sale: 3 UMP BP 500 A sawdust briquetting machines. Hsdpsyr S T Ssfx Agtent Model years: 2022, 2022, 2023. The machines are fully operational and have all undergone a complete service.

Condition: like new (used), functionality: fully functional, mileage: 667,000 km, fuel type: diesel, overall weight: 44,000 kg, axle configuration: 6x2, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, suspension: steel-air, number of seats: 2, Year of construction: 2018, Equipment: EBS, air conditioning, cruise control, parking heater, power assisted steering, retarder, seat heater, VOLVO FH 13 500 6X2 26T EURO 6 VOITH RETARDER STEERABLE AND LIFTING AXLE PARK COOL DAY/NIGHT SYSTEM I-SHIFT AUTOMATIC TRANSMISSION (VOLVO) INTEGRAL ALUMINUM BOX BODY, GUILLOT, 3 FLOORS REFRIGERATION UNIT Hnjdpfxjz Aqg Do Agtot REFRIGERATOR HEATER

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 180398, clamping force: 1,200 kN, screw diameter: 35 mm, injection weight: 186 g, Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire is this high precision Engel Victory VC 500/120 injection moulding machine. This tie bar-less machine is fitted with the Engel Microprocessor controller and 35mm diameter screw, which gives a shot weight of 186 (PS)g. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Hnedjzx Uc Ispfx Agtjt Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: used, Year of construction: 2018, functionality: fully functional, The dry air dryer from Koch is up for sale. Below are some technical details: - Designed for 135 kg/h for 7 machines - NEW PRICE of the system: €115,000 Model: CKT 500F, frequency-controlled version - 500 cubic meters/hour dry air - Touch panel control expansion for CKT/EKO dryers - Control system expansion integrated as a conveying system in CKT/EKO dryers, up to 16 points of demand - Containers: 1 x 200 liters; 4 x 150 liters; 2 x 60 liters, with cleaning door - Koch hopper heaters at 3 kW, 5 units - Koch hopper heater at 1.5 kW, 2 units Hjdpfsy Amr Esx Agtjnt - V2A extraction containers, 7 units - Stationary frames, 2 units - Economy system control for gentle material drying and maximum energy savings - Empty suction valves NW 40, double empty suction, 7 units - And much more...

Condition: like new (used), Year of construction: 1997, functionality: fully functional, overall weight: 2 kg, input voltage: 230 V, input frequency: 50 Hz, We offer this used Allen-Bradley SLC 500 control unit, manufactured in 1997. POWER SUPPLY INPUT MODULE OUTPUT MODULE Model number: 1746-P2 Hnjdeyutfhspfx Agtjt Series: C Input voltage: 85–132 V AC Input voltage: 170–265 V AC Frequency: 50/60 Hz Output current at 5 V DC: 5 A Output current at 24 V DC: 0.96 A Max. user current at 24 V DC: 0.2 A Replacement fuse: 250 V–3 A fuse Temperature code: T3C Class and division: I, Groups A, B, C, D, Division 2 Conductor insulation: copper, 75 °C Country of origin: Malaysia Year of manufacture: 1997 If you have any further questions or need more information, please feel free to send us a message or call us.