Used Intermediate Mullion Alignment (Mullion) for sale (1,447)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,900 kg, maximum load weight: 34,100 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,420 mm, loading space height: 2,150 mm, loading space volume: 49 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 4,040 mm, suspension: air, tire size: 385/65 r22.5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Further Information Chassis Fine-grain steel welded construction, lightweight design, fifth wheel plate with interchangeable 2 kingpins Curved front end, patented 24-ton, 2-speed landing gear, single-sided operation, with straight lower part, without push-pull compensation Wedge supports + holder Under-run protection, foldable Semi-shell fenders Integrated fender holder, surface repels stones Towing hook at the rear Axles + Suspension SAF disc brake axles Axle/suspension laser-aligned, reduces tire wear and fuel consumption Air suspension 1st axle: automatic lift axle, including forced lowering and starting assist, activated by 3x braking (starting assist functional up to an axle load exceeding 30% and a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking System 2-line pneumatic braking system, color-coded lines for easy servicing Spring-loaded parking brake Ledei Ri Idepfx Aiiorn 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be pulled by tractor units that ensure the effectiveness of the ABS! With lifting and lowering valve Vehicle - Driving Stability System Wheels & Tires 385/65R22.5, manufacturer's choice Polished aluminum rim, manufacturer's choice Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pin socket at the front, without connection cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw-on fitting, fixed part, NW 48 mm Actuation hydraulically via truck auxiliary drive Tippers Aluminum box tipper, sloping front wall, 5 mm thick, with external side walls made of 30 mm hollow profile, cleanly welded, with upper edge profile that prevents spillage of bulk goods. Interior with access ladder on the front wall Shovel and broom holder on the outside of the front wall Greenline - conical and aerodynamic tipper body shape Membrane - rear wall Rear wall as a swing-open flap with double-joint hinge, externally mounted with 2-fold hook locking. Rear wall with rubber seal Note! Heat-resistant up to max. 170°C! Floor continuously 5 mm thick, Brinell 110 Note! Only for the transport of sand, gravel and rolled gravel with a maximum grain size of up to 20 mm! All other transported goods are excluded from the warranty! Standing platform with access ladder, connecting plate for air/electricity and brake with large space for the best possible operation. Roll tarp, single-sided for storing on the right-hand side (when facing forward), with central locking on the left-hand side (when facing forward) Operating instructions For the transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to protect against rust The specified total weight is technically possible, but depending on the cargo, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and handling behavior possible due to incorrect load distribution) Country of registration / Signs Germany with Dekra approval and certificate (according to §13 EG - FGV) 24/7 service hotline pre

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,980 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space width: 2,420 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,240 mm, suspension: air, tire size: 385/65 r22.5, tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. More information Chassis Fine-grained steel welded construction, lightweight design, kingpin plate with 2 interchangeable kingpins Curved front end, patented without support leg Wheel chocks + holder Underrun protection, foldable Semi-shell fenders integrated fender holder, surface resistant to stone chipping Towing hook at the rear Axles + Suspension SAF disc brake axles Axle/chassis laser-measured to reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle, incl. forced lowering and starting assist, actuated by 3x brakes (starting assist functional up to an axle load exceedance of 30% and a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 tamper-proof coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable with lifting and lowering valve Vehicle driving stability system Wheels & tires 385/65 R22.5, manufacturer's choice Polished aluminum rim, manufacturer's choice Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pin socket at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome plated, with HDK screw connection, fixed part, NW 48 mm. Actuation via hydraulic system connected to the truck's auxiliary drive Tippers Lrjdpji Ri H Ssfx Aiijn Sloping front wall 5 mm thick, with external side walls made of 30 mm hollow chamber profiles, neatly welded, with upper edge profile to prevent material spillage. Inside with a ladder on the front wall Shovel and broom holder on the outside of the front wall Greenline - conical and aerodynamic tipper body shape Membrane - rear wall Rear wall as a hinged flap with double-joint hinge, externally supported with a double hook lock. Rear wall with rubber seal Note! Heat resistant up to max. 170°C! Floor continuously 5 mm thick, Brinell 110 Note! Only for the transport of sand, gravel and rolled gravel with max. grain size up to 20 mm! All other transport goods are excluded from the warranty! Standing platform with ladder, connection plate for air/electric and brake with large clearance for best possible operation. Rollover tarpaulin, one-sided for laying down on the right-hand side, with central locking on the left-hand side Operating instructions For the transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chrome plated piston rod to protect against rust The specified total weight is technically possible, depending on the cargo, the total weight may not be reached while observing the permissible axle/support and saddle loads. (Poor driving and handling behavior due to incorrect load distribution possible) Country of approval/ Signage Germany with Dekra approval and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau Tipper body R

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 55 kg, maximum load weight: 33,500 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,410 mm, suspension: air, tire size: 385/65 r22.5, tire condition: 100 %, Further information Chassis Fine-grain steel welded construction, lightweight design, fifth wheel coupling with 2 interchangeable kingpins Curved front panel, patented Telescopic support in the center, uncoupling with load is not possible; when uncoupled, the vehicle must be tilted backwards. Wheel chocks + holder Underrun protection, foldable Half-shell fenders Integrated fender holder, surface repels stones Splash flaps behind the last axle in asphalt design, attached to the fender with a hinge, with the option to be hooked onto the fender at the top, fender shortened Towing hook at the rear Axles + Suspension SAF drum brake axles Axle/suspension laser-aligned, reduces tire wear and fuel consumption Axles in off-road design Air suspension 1st axle: automatic lift axle, including forced lowering and starting assistance. Operation via 3x brake (starting assistance is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism Braking system 2-line compressed air braking system, color-coded lines for easy maintenance Spring brake parking brake 2 tamper-proof coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be pulled by tractors that guarantee the effectiveness of the ABS! With lifting and lowering valve Vehicle driving stability system Wheels & Tires 385/65R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lights on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole tamper-proof sockets at the front, without connecting cable Hydraulics High-pressure cylinder, max. 250 bar, with HDK screw fitting, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck auxiliary drive Tippers Steel round tipper in Stone Master design made of highly wear-resistant HB 400/450 steel. Sloping front wall with externally mounted hydraulic cylinders and access ladder on the front wall. Membrane rear wall Rear wall as a swing gate, externally supported with double hook locking. 2 clamping screws with cam locks on the sides at the bottom. Lrodpfx Aji Rix Seiijn Side walls continuous, 4 mm thick, floor 4/5 mm thick, wear-resistant and weight-optimized construction Tipper in insulated version, Fliegl Asphalt Profi Thermo, tipper insulated at the front, sides, bottom and rear with Fliegl Isotherm. BASIC cover, tarpaulin cladding Standing platform with ladder, connection plate for air/electricity and brake with large clearance for optimal operation. Roll tarp, one-sided for folding to the right, with central locking on the left Operating instructions For transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chrome plated piston rod to protect against rust. The specified total weight is technically possible; depending on the load, the total weight may not be reached while complying with the permissible axle/support and fifth wheel loads. (Poor driving and tracking behavior possible due to incorrect load distribution) Country of registration / Signs Germany with Dekra approval and certificate (according to §13 EC - FGV) Superstructure strength according to EN 12642 24/7 service hotline Manufacturer's certificate for thermal vehicles according to RS 10 - 2013 prepared for single-line license plate holder Contour marking

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,350 kg, maximum load weight: 28,650 kg, overall weight: 33,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,420 mm, loading space height: 1,750 mm, loading space volume: 30 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,400 mm, suspension: air, tire size: 385/65R22,5, tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Further information Chassis, semi-trailer, tipper Fine-grained steel welded construction, lightweight design, fifth wheel with 2 interchangeable kingpins Curved front panel, patented 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without slide-out compensation 2 support wedges with holder Underrun protection, foldable Half-shell fenders Tarp pole with bracket 2 towing hooks at the rear Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reducing tire wear and fuel consumption Axles in off-road design Lrjdpfx Aioi Rizioisn Air suspension 1st axle, automatic lift axle, including forced lowering and starting assist Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Brake system 2-line compressed air brake system, colored line routing for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic brake system with EBS socket at the front, without connecting cable Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with lifting and lowering valve Vehicle - driving stability system Wheels and tires 385/65 R22.5, manufacturer's choice Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display via the towing vehicle's display, via EBS, without installation in the truck (this must be available in the truck. Only on the base tires). Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the side Yellow LED lighting on the side linked to the turn signal "flashing side marker lights" 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chrome plated, with HDK screw connection, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck auxiliary drive Tippers Aluminum box tipper made of high-quality, abrasion-resistant material, front wall 5 mm thick, with external side walls made of 30 mm hollow chamber profiles, cleanly welded, with a top profile that prevents bulk materials from shifting. Inside with a ladder on the front wall (not in connection with Cramaro). Shovel and broom holder on the outside of the front wall. Greenline - conical and aerodynamic tipper body shape Diaphragm - rear wall Rear wall as a swing gate with double hinge, externally mounted with double hook locking. Rear wall with rubber seal. Note! Heat-resistant up to max. 170°C! Floor continuously 6 mm thick Standing platform with ladder, connection plate for air/electricity and brake with large clearance for best possible operation. Roll-up cover on one side to be placed on the right, with central locking on the left Country of registration/Signs Germany with Dekra approval and certificate (according to §13 EC - FGV) 24/7 service hotline prepared for single-row license plate holder Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Paintwork Frame DB 7350 Novagrau "10-year warranty against rust-through" Tipper body RAL optional, solid color Roll-up cover RAL 7035 light g

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,350 kg, maximum load weight: 33,650 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,650 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,000 mm, suspension: air, tire size: 385/65 R 22.5, tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Further information: Chassis, semi-trailer tipper Fine-grained steel welded construction, in basic lightweight design, trailer plate with 2 interchangeable kingpins Curved front end, patented Telescopic support in the center, uncoupling with load is not possible; when uncoupled, the vehicle must be tilted backwards. Wedge blocks with holder Rear underrun protection, foldable Half-shell fenders Integrated fender holder, surface repels stones Tarpaulin rod with holder Towing hook at the rear Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reduces tire wear and fuel consumption Axles in off-road design Air suspension 1st axle: automatic lift axle, including forced lowering and starting assistance Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle - driving stability system Wheels and tires 385/65 R22.5 Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display on the towing vehicle's display, via EBS, without installation in the truck (this must be available in the truck). Only on standard tires. Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides Yellow LED lighting on the sides linked to the turn signal ("flashing side lights") 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck auxiliary drive Body Steel round body in Stone Master design made of highly wear-resistant HB 400/450 steel. Sloping front wall with externally mounted hydraulic cylinders with access ladder on the front wall. Greenline - conical and aerodynamic body shape Shovel and broom holder on the outside of the front wall. Membrane - rear wall Rear wall as a hinged flap with double-hinge hinge, externally mounted with double hook lock. 2 clamping screws with lever locks on the lower side. Side walls continuous, 4 mm thick, floor 4/5 mm thick, wear-resistant and weight-optimized design Standing platform with access ladder, connection plate for air/electricity and brake with large clearance for best possible operation. Roller cover on one side for placement on the right side, with central locking on the left side Country of registration / signs Germany Type approval according to EC 2007/46 Superstructure strength according to EN 12642 24/7 service hotline prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Ledpfji Ri Dpjx Aiisrn Paint finish Frame DB 7350 Novagrau "10-year warranty against rust-through" Support legs galvanized Body RAL desired color, solid color Roller cover RAL 7035 light gray

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 5,700 kg, maximum load weight: 33,300 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,700 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 31 m³, total length: 9,090 mm, total width: 2,550 mm, total height: 3,110 mm, suspension: air, tire size: 385/65 R 22,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. More information Chassis, saddle, and tipper Fine-grained steel welded construction, in basic lightweight design, saddle plate with interchangeable 2 king pin Curved front panel, patented 24 tons, 2-stage support winch, single-sided operation, with straight lower part, without extension compensation Chocks with holder Rear underrun protection, foldable Semi-shell mudguards Integrated mudguard holder, surface designed to repel stones With anti-splash flaps, only on the last axle Tarpaulin rod with holder Towing hook at the rear Axles + Suspension BPW disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned, reduces tire wear and fuel consumption Air suspension 1st axle: automatic lift axle, including forced lowering and starting aid Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Brake system 2-line compressed air brake system, color-coded lines for easy service Spring-loaded parking brake 2 fail-safe coupling heads in the front, without connection line EBS, electronic brake system with EBS socket in the front, without connection cable Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! With lifting and lowering valve Vehicle - driving stability system Wheels and tires 385/65 R22.5 Steel rims, factory silver "TPMS" Tire Pressure Monitoring System according to ECE R 141, display via display in the towing vehicle, via EBS, without truck installation (this must be available in the truck. Only on standard tires). Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides Yellow LED lighting on the sides, linked to the turn signal ("flashing side lights") 2 x 7-pole fail-safe sockets in the front, without connection cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw sleeve, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck auxiliary drive Dump body Steel round dump body in "Stone Master Design" made of highly wear-resistant HB 400/450 steel. Sloping front wall with external hydraulic cylinder mount. Inside with access ladder on the front wall. Greenline - conical and aerodynamic dump body shape Shovel and broom holder on the outside of the front wall Membrane - rear wall Lsdsi Rivdjpfx Aiiorn Rear wall as a pivoting flap with double-hinge hinge, externally mounted with double hook lock. 2 clamping screws with toggle closures on the lower side. Side walls continuously 4 mm thick, floor 4/5 mm thick, wear-resistant and weight-optimized construction Standing platform with access ladder, connection plate for air/electrical and brake connections with ample space for the best possible operation. Rollover cover on one side for storage on the right-hand side, with central locking on the left-hand side Country of registration/plates Germany Type approval according to EC 2007/46 Superstructure strength according to EN 12642 24/7 service hotline Prepared for license plate holder, single-line Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint finish Frame DB 7350 Novagrau "10-year warranty against rust-through" Support legs, black coated Dump body, RAL color of your choice, single color Rollover cover,

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,400 kg, maximum load weight: 33,600 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 2,960 mm, suspension: air, tire size: 385/65 R 22.5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. More Information Chassis Fine-grained steel welded structure, lightweight design, drawbar plate with interchangeable 2 kingpin Curved front panel, patented Telescopic support, centering, cannot be used for coupling with a load, in the uncoupled state, the vehicle must be tilted backwards. Chocks + holder Underrun protection, foldable Half-shell fenders Integrated fender holder, surface designed to deflect stones Splash flaps behind the last axle in asphalt design, attached to the fender with a hinge, with the option to be hooked onto the top of the fender, fender shortened Towing hook at the rear Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Axles in off-road design Air suspension 1st axle automatic lift axle, incl. forced lowering and starting assist Hot-dip galvanized lift axle mechanism Braking system 2-line pneumatic brake system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connection line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles which ensure the effectiveness of the ABS! With lifting and lowering valve Vehicle stability system Wheels & Tires 385/65R22.5 Steel rims, factory silver "TPMS" according to ECE R 141, display via display in the towing vehicle, via EBS, without installation in the truck (this must be available in the truck. Only on standard tires). Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides coupled with the turn signal "flashing side lights" 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Hydraulics High-pressure cylinder max. 250 bar, with HDK screw coupling, fixed part, NW 48 mm Operation via truck PTO (power take-off) Dump Body Steel round dump body, Stone Master design made of highly wear-resistant HB 400/450 steel. Sloping front wall with externally mounted hydraulic cylinder with access ladder on the front wall. Membrane rear wall Rear wall as a hinged flap, externally mounted with double hook locking. 2 clamping screws with lever locks on the lower sides. Side walls continuously 4 mm thick, floor 4/5 mm thick, wear-resistant and weight-optimized construction Lsdpfx Aiji Rix Ieiorn Dump body in insulated design, Fliegl Asphalt Profi Thermo, dump body insulated at the front, sides, bottom and rear with Fliegl Isotherm. BASIC cover, tarpaulin cladding Standing platform + access ladder, connection plate for air/electrical and brake with large clearance for best possible operation. Roll tarp on one side for placement on the right-hand side, with central locking on the left-hand side Country of approval / Signs Germany Type approval according to EC 2007/46 Superstructure strength according to EN 12642 24/7 service hotline Manufacturer certificate for thermal vehicles according to RS 10 - 2013 Prepared for license plate holder, single-row Warning sign according to ECE - 70 Painting Frame DB 7350 Novagrau "10 years warranty against rust" Support legs galvanized Dump body / Side tarp RAL color of your choice, plain color Roll tarp RAL 7035 light gray Thermal insulat

Condition: used, mileage: 364,441 km, power: 95 kW (129.16 HP), first registration: 07/2015, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 02/2027, color: blue, gearing type: automatic, emission class: euro5, Year of construction: 2015, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Vehicle No.: 362-25 Mercedes-Benz 313 CDi Lrjdpfexntprox Aiijn BERTSCHE lightweight waste compactor / collection vehicle First registration: 07.2015 * Wheelbase: 3,250 mm * Rotating beacon * Electrically foldable signal panel * Full service history exclusively with DAIMLER Special equipment Hill start assist, additional reinforced battery, digital tachograph with download capability, 180 A alternator, programmable special module, amber warning beacon, acoustic reverse warning signal (external sounder), front mud flaps, seat upholstery: synthetic leather (driver’s cab), double passenger seat in cab, reinforced rear stabilizer, reinforced front stabilizer, heavy-duty shock absorbers, isolation relay for additional battery, 95 Ah fleece battery, reinforced front axle Further equipment: Adaptive brake light, driver’s airbag, washer fluid level indicator, electrically adjustable and heated exterior mirrors (both sides), exterior mirrors with integrated indicator, 74 Ah battery, brake assist, brake system with ABS+ASR, driver’s cab roof lining, lockable glove compartment, body type: standard flatbed, main fuel tank: 75 liters, headlamp leveling, truck registration, model update, engine: 2.1 l - 95 kW CDI CAT (2143 cc), wheelbase: 3,250 mm, smoker’s package, tire repair kit with compressor, low emissions according to Euro 5 standard, driver’s side seat belt system with warning system, passenger seat in cab adjustable, steel rims 6.5x16, service interval display Assyst, heat-insulating glazing, permissible gross weight 3.50 t Viewing possible at any time during our business hours, test drives by appointment! For export sales, a deposit will be retained, which will be refunded after receipt of the certificate of arrival. Company and advertising logos on the vehicles may have been digitally edited in the photos. No guarantee is given for the function of the extras. All information provided without guarantee – errors, changes, typographical mistakes and intermediate sale reserved. Vehicle descriptions do not constitute assured characteristics. Please refer to our General Terms and Conditions and ensure you are familiar with them.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,750 kg, maximum load weight: 30,250 kg, overall weight: 35,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,000 mm, suspension: air, tire size: 385/65 R 22.5, tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. More information Chassis, semi-trailer, tipper Fine-grained steel welded construction, in basic lightweight design, turntable with interchangeable 2 kingpin Curved front end, patented 24 tons, 2-speed landing gear, single-side operation, with straight lower part, without thrust compensation Underrun protection, foldable Half-shell mudguards Towing hook at the rear Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Axles in off-road design Air suspension 1st axle, automatic lift axle, including forced lowering and starting aid Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connection line EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! With lifting and lowering valve Vehicle - driving stability system Lrjdji Ri Nfjpfx Aiisn Wheels and tires 385/65 R22.5 Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display via the display in the towing vehicle, via EBS, without truck installation (this must be available in the truck. Only for basic tires). Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the side Yellow LED lighting on the side coupled with the turn signal "Flashing side lights" 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connection cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw connection, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck auxiliary drive Body Steel round body in Stone Master design made of highly wear-resistant HB 400/450 steel. Sloping front wall with externally mounted hydraulic cylinder with ladder on the front wall. Greenline - conical and aerodynamic body shape Shovel and broom holder on the outside of the front wall. Membrane - rear wall Rear wall as a swing gate with double hinge, externally mounted with double hook locking. 2 clamping screws with lever locks on the side below. Side walls continuous, 4 mm thick, floor 4/5 mm thick, wear-resistant and weight-optimized construction Standing platform with ladder, connection plate for air/electricity and brake with large space for best possible operation. Roll cover on one side for stowing on the right, with central locking on the left Country of registration/signs Germany With Dekra approval and certificate (according to §13 EG - FGV) Superstructure strength according to EN 12642 24/7 service hotline Prepared for license plate holder, single row Contour marking with reflective tape according to ECE R 048, white on the side and red at the rear Paint finish Frame DB 7350 Novagrau 10-year warranty against rust-through Support feet, black coated Body RAL, single color Roll cover RAL, single color Available in thermally insulated design!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,100 kg, maximum load weight: 33,900 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,400 mm, loading space height: 1,750 mm, loading space volume: 40 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 3,340 mm, suspension: air, tire size: 385/65 R 22,5, tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized to individual customer specifications. More information Chassis, semi-trailer, tipper Fine-grained steel welded construction, in basic lightweight design, fifth wheel plate with interchangeable 2" kingpin Curved front end, patented 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without push-pull compensation 2 chock blocks + holder Underrun protection, foldable Partial fender Integrated fender bracket, surface resistant to stone chipping With anti-splash flaps on the last axle 1 tarpaulin rod with bracket 2 towing hooks at the rear Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned to reduce tire wear and fuel consumption Axles in off-road design Air suspension 1st axle automatic lift axle, incl. forced lowering + starting aid, operated by 3x brake Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line pneumatic braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! With lifting and lowering valve Vehicle stability system Wheels and tires 385/65R22.5, manufacturer's choice Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display via display in the towing vehicle, via EBS, without installation in the truck (this must be a prerequisite in the truck. Only on standard tires). Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides coupled with the turn signal "flashing side lights" 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw fitting, fixed part, NW 48 mm. Operation hydraulically via truck auxiliary drive Body Aluminum box body made of high-quality, abrasion-resistant material, front wall 5 mm thick, with external sidewalls made of 30 mm hollow profile, neatly welded, with overhead profile to prevent bulk material from spilling. Inside with access ladder on the front wall (not in conjunction with Cramaro). Shovel and broom holder on the outside of the front wall. Greenline - conical and aerodynamic body shape Membrane - rear wall Rear wall as a swing gate with double-hinge hinge, externally mounted with 2-fold hook locking. Rear wall with rubber seal. Note! Heat resistant up to max. 170°C! Floor continuously 6 mm thick Lrjdpfx Aiji Rixyjisn Standing platform with access ladder, connecting plate for air/electricity and brake with large space for best possible operation. Roll cover, can be folded to one side on the right, with central locking on the left Registration country/license plates Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for license plate holder, single row Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau "10-year warranty against rust-through" Support legs, black coated Body, aluminum, natural Roll cover, RAL 7035 light gray

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,200 kg, maximum load weight: 33,800 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,110 mm, suspension: air, tire size: 385/65R22,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Further Information Chassis, Saddle, and Tipper Fine-grained steel welded construction, in basic lightweight design, saddle plate with interchangeable 2 kingpins Curved front end, patented Telescopic support in the center, uncoupling with load is not possible; when uncoupled, the vehicle must be tilted backward. Chocks with holder Underrun protection, foldable Half-shell fenders Integrated fender holder, surface designed to repel stones Tarpaulin rod with holder Towing hook at the rear Axles + Suspension Lrjdpfoi Ri A Ijx Aiien SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Axles in off-road design Air suspension 1st axle: automatic lift axle, including forced lowering and starting assist Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking System 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lift and lower valve Vehicle - Driving Stability System Wheels and Tires 385/65 R22.5 Steel rims, factory silver "TPMS" Tire Pressure Monitoring System according to ECE R 141, display via the towing vehicle, via EBS, without truck installation (this must be possible in the truck. Only for standard tires). Electrical System 24 volts, multi-chamber lights, yellow LED lighting on the side Yellow LED lighting on the side, linked to the turn signal ("flashing side lights") 2 white position lights at the front 2 white/red outline lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chrome plated, with HDK screw connection, fixed part, NW 48 mm (without hose connection) Actuation hydraulically via truck auxiliary drive Body Steel round body in Stone Master design made of highly wear-resistant HB 400/450 steel. Sloping front wall with externally mounted hydraulic cylinder with access ladder on the front wall. Greenline - conical and aerodynamic body shape Shovel and broom holder on the outside of the front wall. Membrane - rear wall Rear wall as a swing flap with double-hinge, externally supported with 2-fold hook lock. 2 clamping screws with cam locks on the side at the bottom. Side walls continuously 4 mm thick, floor 4/5 mm thick, wear-resistant and weight-optimized design Standing platform with access ladder, connection plate for air/electrical and brake connections with large clearance for the best possible operation. Roll-over tarpaulin on one side, to be placed on the right, with central locking on the left Registration country / signs Germany Type approval according to EG 2007/46 Body strength according to EN 12642 24/7 service hotline prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Painting Frame: DB 7350 Novagrau "10-year warranty against rust-through" Support legs: galvanized Body: RAL color of your choice, solid color Roll-over

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 6,750 kg, maximum load weight: 32,250 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 9,950 mm, loading space width: 2,480 mm, loading space height: 2,150 mm, loading space volume: 50 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 3,670 mm, suspension: air, tire size: 385/65 R 22,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. More information Chassis, Saddle, Tipper Fine-grained steel welded construction, in basic lightweight design, saddle plate with interchangeable 2 kingpin Curved front end, patented 24 ton, 2-speed support winch, single-sided operation, with straight lower part, without thrust compensation Wheel chocks with holder Underrun protection, foldable Half-shell fenders Integrated fender holder, surface designed to repel stones Tarp rod with holder Towing hook at the rear Axles + Suspension BPW disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle, automatic lift axle, including forced lowering and start-up assistance Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line Lsdpfei Rizfex Aiisrn EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With raising and lowering valve Vehicle - driving stability system Wheels and tires 385/65 R22.5 Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display via display in the towing vehicle, via EBS, without truck installation (this must be available in the truck. Only on standard tires). Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides Yellow LED lighting on the sides, linked to the turn signal ("flashing side lights") 2 x 7-pole fail-safe sockets at the front, without connecting cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw-on fitting, fixed part, NW 48 mm (without hose connection) Operation via truck auxiliary drive Body Steel side body made of highly wear-resistant HB 400 steel, sloping front wall with externally mounted hydraulic cylinder mount. Shovel and broom holder on the outside of the front wall. Internal access ladder on the front wall. Side walls continuously 3 mm thick, floor continuously 3 mm thick Membrane - rear wall Internal width at the bottom approx. 1440 mm Aluminum rear wall, pendulum-mounted with "double-hinge hinge" and with 2-wing door, split 1/2 to 1/2, at the top with pivoting boom, each with a grain slide per door. Standing platform with access ladder, connection plate for air/electricity and brake with large space for optimal operation. Roller cover on one side for placement on the right side, with central locking on the left side Country of approval/signs Germany Type approval according to EC 2007/46 Body strength according to EN 12642 24/7 service hotline Prepared for license plate holder, single-line Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint Frame: DB 7350 Novagrau "10-year warranty against rust-through" Body: RAL, single color, according to customer's choice Roller cover: RAL 7035 light gray

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,900 kg, maximum load weight: 30,100 kg, overall weight: 35,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,150 mm, suspension: air, tire size: 385/65 R 22.5, tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Further information Chassis, semi-trailer, tipper Fine-grain steel welded construction, in basic lightweight design, trailer plate with 2 interchangeable kingpins Curved front panel, patented 24-ton, 2-speed landing gear, single-sided operation, with straight lower part, without push-pull compensation Underrun protection, foldable Half-shell mudguards Lsdpfxei Ri Nio Aiijrn Tow hitch at the rear Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned, reducing tire wear and fuel consumption Axles in off-road design Air suspension 1st axle, automatic lift axle, including forced lowering and starting aid Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line pneumatic braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! With lifting and lowering valve Wheels and tires 385/65 R22.5 Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display on the towing vehicle, via EBS, without truck installation (this must be available in the truck. Only on standard tires) Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides Yellow LED lighting on the sides linked to the turn signal "Flashing side lights" 2 x 7-pin fail-safe sockets at the front, without connecting cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chrome plated, with HDK screw connection, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck auxiliary drive Body Steel round body in Stone Master design made of highly wear-resistant HB 400/450 steel. Inclined front wall with externally mounted hydraulic cylinder with access ladder on the front wall. Greenline - conical and aerodynamic body shape Shovel and broom holder on the outside of the front wall Membrane rear wall Rear wall as a hinged flap with double-joint hinge, mounted on the outside with double hook lock. 2 clamping screws with knob closures on the sides at the bottom. Side walls continuous, 4 mm thick, floor 4/5 mm thick, wear-resistant and weight-optimized construction Standing platform with access ladder, connecting plate for air/electricity and brake with large space for optimal operation Rollover cover on one side for stowage on the right, with central locking on the left Country of registration/ signs Germany With Dekra approval and certificate (according to §13 EG - FGV) Body strength according to EN 12642 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Painting Frame DB 7350 Novagrau 10-year warranty against rust-through Support legs, black coated Body, RAL color of your choice, solid color, subject to availability Rollover cover, RAL color of your choice, solid color Also available with hydraulic rear wall

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,600 kg, maximum load weight: 32,400 kg, overall weight: 38,000 kg, axle configuration: 3 axles, loading space height: 1,295 mm, total length: 12,900 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22.5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Chassis, saddle, container Fine-grain steel welded construction, saddle plate with 2 replaceable kingpins and 2 kingpin positions Front locking mechanism on the tipper ram mounting bracket with lateral locking Tapered locking wedges, rear locking mechanism on a continuous pivot shaft with return spring Without subframe for self-supporting containers Container mounts: Locking crossmember, 2-fold for locking 1 x 30 ft or 1 x 40 ft container. Adjustment via central telescope as an interlocking central tube frame with bolt lock. Optimal saddle load when transporting 30 ft and 40 ft containers. 24 tons, 2-speed support winch, single-sided operation, with straight lower part, without thrust compensation 2 support wedges with holder Aluminum side impact protection Galvanized steel underrun protection Half-shell fenders with anti-spray flaps according to EC Hydraulics 100 low-pressure cylinder, max. 150 bar, with HDK screw connection, fixed part, NW 48 mm. (without hose connection) Operation hydraulically via truck auxiliary drive, included. Hydraulic connection with hose and HDK screw connector NW = 48 mm with knurled nut Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reduces tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons total weight Air suspension Braking system 170 2-line compressed air braking system Color-coded line routing for easy service. Spring-loaded parking brake Tele Control Axle load adjustment for easy telescoping 2 fail-safe coupling heads at the front, without connection cable EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with lifting and lowering valve Vehicle - driving stability system Axle load recognition via EBS-CAN bus signal, for display on the display in the driver's cab, the truck must be prepared accordingly Wheels and tires 385/65 R22.5, manufacturer at the manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connection cable 2 additional LED work lights at the rear, switched via reversing light Lredpfxoi Riv Es Aiion Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements.

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 7,900 kg, maximum load weight: 31,100 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space width: 2,330 mm, loading space height: 1,950 mm, loading space volume: 50 m³, total length: 11,200 mm, total width: 2,550 mm, total height: 3,470 mm, suspension: air, tire size: 385/65 R 22,5, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized to meet individual customer needs. Further information Chassis, semi-trailer, tipper Fine-grained steel welded construction, lightweight design, with slight curvature, kingpin plate with replaceable 2" kingpin 24 tons, two-speed landing gear, single-sided operation, with straight lower part, without sliding adjustment Chocks with holder Rear underrun protection, foldable Half-shell fenders integrated fender holder, surface resistant to stone chipping Tarp pole with bracket Tow hitch at the rear Axles + Suspension BPW disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reduces tire wear and fuel consumption Air suspension 1st axle: automatic lift axle, including forced lowering and starting assist Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line pneumatic braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connection line EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle - driving stability system Wheels and tires 385/65 R22.5 Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display on the towing vehicle's display, via EBS, without installation in the truck (this must be available in the truck as a prerequisite. Only for standard tires). Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides Yellow LED lighting on the sides linked to the turn signal "Flashing side lights" 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connection cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chrome plated, with HDK screw connection, fixed part, NW 48 mm (without hose connection) Actuation hydraulically via truck auxiliary drive Tipping body Steel-rimmed tipping body made of highly wear-resistant HB 400 steel, sloping front wall with externally mounted hydraulic cylinder mount. Foldable aluminum splash guard on the right side for tarp. Shovel and broom holder on the outside of the front wall. Interior with ladder on the front wall. Side walls continuous 4 mm thick, floor continuous 5 mm thick Diaphragm - rear wall Rear wall with 2-leaf door division 1/2 to 1/2, with 1 slide in the right leaf. With externally mounted rotary rod lock and mechanical lock at the bottom. Standing platform with ladder, connection plate for air/electricity and brake with large clearance for best possible operability. Tarp on one side for storage on the right side, with central locking on the left side Country of registration / signs Germany Type approval according to EG 2007/46 Body strength according to EN 12642 24/7 service hotline prepared for license plate holder, single row Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the sides and red on the rear Paint finish Frame DB 7350 Novagrau 10-year warranty against rust-through Support legs, black coated Lrodei Rizqjpfx Aiien Tipping body, RAL color of your choice, solid color Tarp, RAL 7035 light gray

Condition: used, mileage: 64,600 km, power: 125 kW (169.95 HP), first registration: 03/2023, fuel type: diesel, overall weight: 3,500 kg, fuel: diesel, color: white, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 3, Equipment: air conditioning, airbag, central locking, cruise control, immobilizer system, navigation system, power assisted steering, sliding door, soot filter, JA7 Blind Spot Assist, EY5 Mercedes-Benz emergency call system, F1K coat hooks in the driver's cab, EY6 breakdown assistance, L65 ceiling light(s) in the driver/passenger compartment with door contact, RS3 steel wheels 6.5 J x 16, Z1N N1 approval, CE8 raised body, SE5 lumbar support for driver's seat, XO9 Mercedes-Benz MobiloVan with roadside assistance and extended warranty, XG7 without payload restriction of 3,500 kg, IR4 wheelbase 3665 mm, T77 grab handle on the step of the loading compartment sliding door on the partition, W54 rear doors – two-wing – opening up to the side panel, E1E digital extra: hard disk navigation, HH9 semi-automatic climate control system TEMPMATIC, E1D digital radio (DAB), Y10 first aid kit, MJ8 ECO start-stop function, ES0 jump start – connection, K60 exhaust pipe pointing straight to the rear, D03 high roof, MS1 cruise control, FM3 wet wiper system, HI1 climate zone 1 (cold/comfort), T86 grab handle on the rear right corner pillar, RM0 all-season tires, V42 lashing rails on the side panel on the load securing strap, C6L multi-function steering wheel, LA2 headlight assistant, ZM0 panel van, IT4 3.5-ton vehicle, J55 seat belt warning system for passenger seat, J58 seat belt warning system for driver's seat, MT6 emission class Euro 6d N1, XZ0 model generation 0, W73 step on the rear door, ED4 fleece battery 12 V 92 Ah, FF5 storage compartment above the windshield, JF1 rain sensor, T12 intermediate locking of the loading compartment sliding door(s), T16 sliding door, right, LB1 side marker lights, RF1 tire manufacturer Continental (10), E3M MBUX multimedia system with 7-inch touchscreen, LB5 3rd brake light, F64 exterior mirrors, electrically foldable, VF7 fabric Maturin black, H20 heat-insulating glass all around, J65 outside temperature display, M40 generator 14 V/200 A, F68 exterior mirrors, heated and electrically adjustable, R65 spare wheel holder under the end of the frame, JG0|., We can be reached by phone Monday - Friday until 8:00 PM and Saturdays until 4:00 PM!! Furthermore:!! Leasing/financing and trade-in possible!! !! !! - Errors and prior sale are reserved!! - All information without guarantee ... more on our website Lredpjzd A Hrefx Aiisn

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, input voltage: 230 V, measuring range X-axis: 200 mm, measuring range Y-axis: 85 mm, measuring range Z-axis: 50 mm, total width: 483 mm, total length: 598 mm, total height: 464 mm, overall weight: 64 kg, input current: 5 A, repeat accuracy: 0.005 mm, input frequency: 50 Hz, Equipment: CE marking, USB port, documentation/manual, type plate available, PG1000-400 – Optical system for inspecting the geometry of rotating cutting tools PG1000-400 is a professional optical measuring and inspection system for quickly checking the geometry of cutting tools. It is designed for tool manufacturers, sharpening shops, grinding shops, tool rooms, CNC machining centers, and quality control/metrology departments. Its main application is the inspection of rotating cutting tools after manufacturing, grinding, sharpening, or reconditioning. The system is suitable for HSS and solid carbide tools, especially drills, end mills, step drills, reamers, taps, form tools, micro tools, and custom-made tools. The device can also be used to inspect carbide inserts, selected thread geometries, screws/bolts, and other precision parts, provided that the geometry being inspected is optically accessible to the camera. The system's primary focus is on the inspection of cutting tool geometry. Typical applications: - In-process inspection directly at the grinding machine or in production - Incoming and outgoing inspection of tools - Inspection after sharpening/regrinding - Quality documentation and measurement reports - Repeated inspection of serially produced tools PG1000-400 allows for the inspection of, for example: - Rake angle and clearance angle - Helix angle - Point angle for drills - Radii and corner radii - Diameters and distances - Cutting edge length - Land width, margin width, facets - Web thickness - Tool profile - Runout - Condition and wear of the cutting edge - Comparison of geometry with DXF/DWG drawings The system operates optically and non-contact. This is advantageous when inspecting sharp edges, fine microgeometries, coated tools, and precise edges, where speed, repeatability, and minimizing operator influence are important. The system includes REACTION software, developed specifically for the inspection of cutting tools. The software offers more than 50 measuring functions, edge detection, automatic alignment of measuring points to the edge, saving inspection scenes, comparison with DXF/DWG geometry, PDF reports with PASS/FAIL evaluation, and data export to Excel/CSV. Technical specifications: - Recommended tool diameter: 0.635–75 mm - Tool measuring length: approx. 190–200 mm - Magnification range: 12.5× to 145× Lrjdjzdz S Tjpfx Aiisn - Camera: 5 MP - Monitor: 27" 4K Ultra HD - Measuring range: 85 mm vertically × 200 mm horizontally - Accuracy/repeatability: ±5 µm at maximum magnification - Device dimensions: approx. 598 × 483 × 464 mm - Weight: approx. 64 kg Offered configuration: - PG1000-400 optical cutting tool inspection system - M / F / A encoders - PC with REACTION software - 27" 4K Ultra HD monitor - Flexible LED lighting with diffuser - Curved magnetic diffusion plate - Rotating base block for clamping fixtures - 1000-026-5"-ASS – 5" V-block assembly with insert, top clamp, and stop - Basic remote operator training About the manufacturer: PG1000 is based on the long-term development of systems for inspecting cutting tools. The first generation of PG1000 was introduced in 1993. The system is manufactured in the USA by PG Inspection Technologies LLC, which specializes in this product line. Since 1996, more than 1000 PG1000 systems have been delivered. Condition and delivery: - New machine - Year of manufacture: 2026 - Warranty: 12 months - Location: Czech Republic / EU - Delivery, assistance with commissioning, and training according to agreement - CE marking and relevant EU documentation The device i

Condition: reconditioned (used), Year of construction: 2005, Palletizer - product infeed via accumulating conveyor - rotary paternoster 90° / 180° inkl. synchronisation Lrsdpov Tu U Refx Aiijn - pallet magazine left hand for 8 pallets - intermediate layer feeder left hand - travel stop for dropping of very smooth products - pallet delivery straight - pallet removal in moving direction

Condition: refurbished (used), functionality: fully functional, input voltage: 400 V, ground cable length: 3,000 mm, warranty duration: 3 months, type of cooling: water, hose package length: 1,000 mm, welding current (min.): 60 A, welding current (max.): 450 A, Equipment: type plate available, Carl Cloos GLC 451 C - Water-cooled Mig Mag Step-controlled Specifications: 60-450 AMP 380 Volt Water-cooled 30 steps adjustable 2/4 stroke 4 roller driven Adjustable burnback time Includes: Mig welding torch, earth cable with clamp, gas hose, and 10 metre intermediate package. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties. Lsdsy Rqt Aopfx Aiisrn

Condition: used, Year of construction: 1985, machine/vehicle number: R88, Used COBERT filling machine for wineTechnical Specifications & Performance DataThis Cobert SUPREMA is an isobaric filling machine engineered for precise counter-pressure filling of wine. With 24 filling valves, it achieves consistent product levels and preserves carbonation and quality in both still and sparkling products. The machine architecture supports industrial packaging environments where accuracy, hygiene, and repeatability are essential for beverage production.Manufacturer: CobertModel: SUPREMAYear: 1985Speed: 3000 BPH Machine type: Isobaric filling machineFilling technology: Isobaric (counter-pressure)No. of filling valves: 24Products: Still wine, semi-sparkling wine, sparkling wineContainers: Glass bottlesLine context: Suitable for integration in a used bottling line and second hand beverage production setupsAdvanced Automation & Control SystemsThe isobaric system pressurizes each bottle prior to liquid dosing, enabling controlled product transfer and stable filling even with carbonated wines. Valve sequencing provides reliable start/stop phases, while pressure equalization safeguards product integrity. The machine supports standard operator controls for setup and monitoring, aligning with established bottling equipment practices for safe and repeatable operation.Production Line Integration CapabilitiesDesigned for seamless integration into a complete bottling line, the SUPREMA pairs effectively with upstream rinsing machines and downstream cappers, capsule application, and labeling machines. It handles standard wine bottle geometries and neck finishes commonly found in beverage production. As part of an industrial packaging or beverage production line, it can operate in-line or as a standalone filler with dedicated infeed and outfeed conveyors.Machine Condition & Maintenance HistoryManufactured in 1985, this SUPREMA reflects robust Cobert engineering suitable for long-term service in second hand bottling applications. Preventive maintenance typically focuses on cleaning and sanitation of product-contact parts, routine inspection of seals and gaskets in the isobaric valves, verification of pressure settings, and calibration of fill levels to ensure consistent performance.Operational Performance & VersatilityThe isobaric filling principle enables gentle handling of sparkling and semi-sparkling wines by matching internal bottle pressure, minimizing foaming and preserving dissolved CO2. For still wines, the controlled filling cycle supports steady flow and stable levels. Its 24-valve configuration balances throughput with careful product handling, making it a versatile choice for wineries upgrading or expanding a used bottling line with proven filling technology.Installation Requirements & Site PreparationInstallation follows standard bottling equipment practices: stable, level flooring for accurate alignment; access for cleaning and service; and suitable utilities such as electrical power, compressed air for actuators, and process water for sanitation. Prop... Lrjdpfezcf I Rsx Aiien

Condition: used, Year of construction: 1994, machine/vehicle number: GA23, Used ROBINO & GALANDRINOwirehooder 6000 BPHTechnical Specifications & Performance DataThis automatic wirehooder is engineered for reliable wire cage application on bottles, ensuring consistent tightening and alignment at production speeds suitable for medium-scale beverage production. Manufactured by Robino & Galandrino, the REKORD 10/2 configuration combines a rotary handling system with a long-duration magazine and ground-level loading to minimize downtime during continuous operation. This second hand unit is a strong addition to any used bottling line focused on premium products and industrial packaging efficiency.Manufacturer: Robino & GalandrinoModel: REKORD 10/2Year: 1994Machine type: Automatic wirehooder (wire cage applicator)Production speed: up to 6,000 bphConfiguration: 10 platesWirehood application: Muselet/wire cage applicationMagazine: Long-duration, high-capacityLoading: Ground-level cage loading for uninterrupted replenishmentBottle format compatibility: 1.5LAdvanced Automation & Control SystemsThe REKORD 10/2 platform is designed for dependable, automated performance with straightforward operator controls. The long-duration magazine and ground-level loading streamline replenishment, reducing stops and improving overall equipment effectiveness. Typical safety interlocks and guarding protect operators while allowing efficient access for adjustments and cleaning.Automated wire cage feed and applicationOperator-friendly controls and status indicationSafety guarding with interlocked access pointsQuick replenishment via ground-level magazine loadingProduction Line Integration CapabilitiesThis wirehooder integrates seamlessly into existing bottling equipment layouts, positioned downstream of corking and upstream of labeling or inspection as required. It supports inline operation with synchronized conveyors or can function as a standalone station with appropriate infeed and outfeed controls.Inline or standalone operation modesCompatible with upstream corkers and downstream labeling/inspectionFormat handling for 1.5L bottles; additional formats can be engineeredSuitable for integration within broader beverage production and industrial packaging linesMachine Condition & Maintenance HistoryThis second hand wirehooder is presented in working condition and ready for operation, providing a practical solution for producers seeking reliable bottling equipment with controlled capital investment.Operational status: Ready for operationPre-owned equipment from established engineeringOperational Performance & VersatilityThe REKORD 10/2 is built to deliver consistent wire cage application at up to 3,000 bottles per hour, supported by a 10-plate rotary handling system. The long-duration magazine and ground-level loading reduce changeover interruptions, supporting steady throughput in used bottling... Lsdpfx Aiszcf I Djiorn

Condition: used, Year of construction: 1990, material width coil line 650 mm coil weight 2 x 3,5 t coil internal diameter 460 - 530 mm coil external diameter 1500 mm material thickness coil line 0,8 - 3,0 mm no. of straightening rolls 7 no. of rolls at in- and outlet 4 roll diameter 80 mm feed length 0 - 500 mm power requirement 10,0 kW weight 10,0 t dimensions of the coil line 8,8 x 4,0 x 2,55 m Straightening machine Dimeco, 1676 EV with inlet table and pre-shaping roll, hydraulic loading bridge Double decoiler Dimeco 2382 FFPS Lrsdpfx Asvuudusiion with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll, coil loading device elektronic roll feed Microfeed 1140 E with DC-drive, pneumatic intermediate lifting of the rolls can only be offered without putting into operation - video at seller's site before dismantling available

Condition: used, Year of construction: 2008, machine/vehicle number: MBI20, Used Packaging Monoblock TMG COMBI 3000 BPHTechnical Specifications & Performance DataThis Casepacking Monoblock is engineered for secondary packaging of bottles with integrated erecting, packing, partition inserting, and sealing in a single compact frame. Manufactured by TMG, model COMBI 15 N-DA, this second hand unit is optimized for beverage production and industrial packaging lines that require reliable, continuous operation.Manufacturer: TMGModel: COMBI 15 N-DAYear: 2008Category: Casepacking MonoblockProduction speed: up to 3000 bph (bottles per hour)Carton formats: 6-bottle cartons; 12-bottle cartonsContainer compatibility: Glass bottlesBottle format handled: 1.5LIntegrated sections: carton forming, high-capacity magazine, case packing, automatic partition inserter, top-and-bottom sealingClosure system: adhesive tape (top and bottom)Control system: PLC-managed operationsAdvanced Automation & Control SystemsThe monoblock features PLC-based controls for synchronized operation of each module, ensuring stable throughput and high repeatability across shifts. Automated sequencing coordinates carton erection, bottle grouping and loading, partition insertion, and closure, minimizing manual intervention. The control logic supports quick stops and restarts, fault diagnostics, and consistent performance for demanding production schedules typical of a used bottling line.Centralized PLC control for all stationsAutomated timing and interlocks between modulesConsistent, repeatable handling for glass packagingDesigned for efficient format adjustments between 6 and 12 bottlesProduction Line Integration CapabilitiesThis monoblock integrates seamlessly into beverage production environments, upstream of palletizing. It can operate inline with conveyors from filling, labeling, and inspection equipment or as a standalone packaging center with infeed and outfeed conveyors. The integrated high-capacity magazine ensures continuous supply of cartons, while automated case closing with tape simplifies downstream logistics.Inline or standalone operationHigh-capacity carton magazine for extended autonomySuitable for wine bottling and other glass-based productsHandles 1.5L bottles; adaptable to 6 or 12 bottle case patternsMachine Condition & Maintenance HistoryThis second hand Casepacking Monoblock is presented in used condition and suitable for integration into an operational packaging line. Built in 2008, it aligns with industrial packaging standards of its generation and is configured for glass bottle handling with tape sealing. Its PLC-managed design supports reliable operation and straightforward maintenance routines typical of robust TMG engineering.Operational Performance & VersatilityDesigned to protect premium products such as sparkling wine, the monoblock combines precise bottle loading with automatic partition insertion for... Lrjdpfxezb Ikre Aiijn

Condition: used, Year of construction: 2021, operating hours: 36,909 h, machine/vehicle number: TP125, Used Tetra Pak Cap30flex - year 2014Technical Specifications & Performance DataThe Tetra Pak Cap 30 Flex is a robust, second hand capping machine engineered for industrial packaging and beverage production on carton lines. Configured for HeliCap 26 Pro closures and optimized for the Square 1000 format, it supports reliable, continuous operation at high throughput. This used capping machine brings dependable performance to any modern used bottling line or packaging system requiring precise cap application on 1.0L cartons.Manufacturer: Tetra PakModel: Cap 30 FlexProduction speed: up to 9,000 pieces/hourClosure type: HeliCap 26 ProPackage format: Square 1000 (1.0L carton)Container compatibility: CartonCompliance: CE markedApplication: Cap application/capping for carton packagesAdvanced Automation & Control SystemsDesigned with an industrial-grade automation platform, the Cap 30 Flex ensures precise, repeatable capping quality. The system typically features PLC-based control with HMI for recipe selection and format management. Coordinated drives maintain accurate positioning and torque control, while integrated sensors enable cap presence detection and fault handling. Quick-access guarding and guided diagnostics streamline routine checks, and saved recipe parameters reduce human error during changeovers, supporting maximum uptime in beverage production.Production Line Integration CapabilitiesEngineered for seamless integration with Tetra Pak carton fillers and standard conveyor systems, this capping machine fits inline as part of a complete industrial packaging solution. Mechanical and electrical interfaces synchronize with upstream filling and downstream inspection, case packing, and palletizing equipment. The cap feeder and chute are designed to deliver stable, jam-resistant cap supply at high speeds, making it ideal for second hand packaging machinery configurations and used bottling line upgrades.Machine Condition & Maintenance HistoryThe machine is currently disconnected, indicating it has been removed from active production and prepared for relocation and recommissioning. Its CE conformity and recent manufacturing year support reliable performance following standard installation, alignment, and validation procedures commonly applied during start-up of used bottling equipment.Operational Performance & VersatilityConfigured for HeliCap 26 Pro closures on Square 1000 cartons, the Cap 30 Flex delivers consistent application quality aligned with stringent beverage packaging standards. Its precise cap alignment and secure application protect product integrity throughout logistics. The modular design aids layout flexibility and supports continuous operation typical of high-efficiency industrial packaging lines.Installation Requirements & Site PreparationInstallation requires stable flooring, sufficient clearance for the cap feeder and operator access, and standard utilities used by packaging machinery, including electrical power and compressed air. Correct line-height alignment with the filler and conveyors is essential to ensure smoot... Lredpfxjzb Ikle Aiion

Condition: ready for operation (used), Year of construction: 2020, operating hours: 1,559 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 120 mm, travel distance Z-axis: 280 mm, spindle motor power: 5,500 W, total height: 1,700 mm, total width: 1,370 mm, overall weight: 2,300 kg, controller manufacturer: FANUC, controller model: Series 0i-TF Plus with 10.4" Touch Display, product length (max.): 1,360 mm, number of axes: 2, This Takamaz XT 6 was manufactured in 2020. It features a maximum turning diameter of Ø180 mm and a maximum turning length of 240 mm. If you are looking to get high-quality turning capabilities, consider the Takamaz XT 6 horizontal turning machine we have for sale. Contact us for further details. - Maximum Turning Diameter: Ø180 mm- Maximum Turning Length: 240 mm (depending on clamping device)- Rapid Traverse (X / Z): 18 / 24 m/min- Maximum Spindle Torque: 63.6 Nm- Spindle Bearing Inner Diameter: Ø75 mm- Spindle Nose: A2-5 short taper- Maximum Bar Capacity: 35 mm- Maximum Chuck Size: 203 mm (8 inch)- Spindle Center Height Over Floor: 950 mm- Tool Turret: 1 x 8-station turret (Direct mounting / boring cassettes)- Shank Height for External Turning: 20 x 20 mm- Maximum Shank Diameter for Boring Bars: 25 mm- Base Machine Dimensions (Footprint without accessories/transformer): 1,360 x 1,370 mm- Overall Height with Loader: 1,700 mm- Power Connection / Supply: 18 kVA / AC200V, 3-Phase, 50/60Hz- Rated Power (Nameplate): 13.0 kVA- Full Load Current: 36 A- Interrupting/Short-Circuit Rating: 2.5 kA- Working Hours (As of 2026/05/22 08:51:21):- Control On Time: 4525 Hours- Operating/Running Time: 1975 Hours- Processing Time: 1559 Hours- Free Use Time: 1733 Hours- Total Parts Counter: 25,600 pieces- Workpiece Counter: 21,801 pieces- Included Automation Equipment:- Fanuc Compact Loader FC60 (2-axis servo loader with two parallel pneumatic grippers, max workpiece diameter 60 mm, max weight 1.0 kg per hand, 90° pneumatic tilting unit)- Integrated parts infeed conveyor belt (length 800 mm)- Integrated parts outfeed conveyor belt (length 600 mm)- Additional Equipment, not included:- Chip conveyor- Reinforced high-pressure coolant pump- Power chuck- Tool holders- Hydraulic power pack- SMW-Autoblok VNK 70-37 hydraulic hollow clamping cylinder- Complete coolant system with standard pump- Leveling elements / alignment plates- Control cabinet with fan ventilation- Electrical transformer Technical Specification Lrodpozb H T Esfx Aiion Counter Spindle No Driven Tools No