Used Intermediate Mullion Alignment (Mullion) for sale (1,524)

Condition: good (used), Year of construction: 1990, Hydraulic surface grinding machine with automatic vertical feed Max. grinding length 670 mm Max. grinding width 280 mm Max. grinding height 400 mm Table speed, longitudinal 2 – 35 m/min Table speed, transverse 0.3 – 40 mm/stroke Rapid traverse yes Grinding wheel dimensions 300 / 76 x 40 mm Drive power 4 kW Machine dimensions L x W x H 2000 x 1850 x 2000 mm Machine weight 2300 kg Hydraulic and electrical system dimensions L x W x H 1200 x 800 x 2000 mm Hydraulic and electrical system weight 650 kg Accessories / Special features: • Permanent magnet clamping plate 630 x 200 mm • Automatic vertical feed with digital display • Manual dressing device • Coolant system • Separate hydraulic unit • Grinding wheel • Machine alignment elements Note: o Hydraulic cylinder for table stroke newly sealed o New filters in the hydraulic unit o Handwheel adjustment for transverse stroke newly mounted Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany Nodpsf Um Raofx Af Sjlg

Condition: good (used), machine/vehicle number: 18285, Aluminum clamping table - clamping block Offer number: 18285 Manufacturer: xxxxx Type: xxxx Machine no.: 18285 Year of manufacture: xxxx Technical data: Nljdpefhv I Asfx Af Ssg - Plate surface in good condition - Length approx. 1540 mm - Width approx. 1540 mm - Height approx. 410 mm - Plate thickness 20 mm - 6 pcs. screw-on supports 50 x 20 mm - Various holes, some with threads - Intermediate supports between the top plate and the lower support surface - 4 attachment eyes - Weight approx. 180 kg

Year of construction: 2025, condition: as good as new (ex-display), ECOPRESS 102 is an automatic hot mounting press with an electro-hydraulic pressure system and therefore does not require a separate compressed air connection. The working pressure reaches up to 300 bars and an embedding temperature up to max. 200°C. The mounting time can be set up to 60 minutes. The automatic process results in short cycle times: thermostatically controlled heating and cooling times, heating output of 1650 W, automatic cooling cycle. Mounting cylinders and pistons with diameters of 25, 30, 40, 50 mm (and inch) are available. The end of the embedding sequence is signaled acoustically by the device. The delivery is made ready for operation (incl. To be ordered separately Mounting cylinder with piston and intermediate piston for 2 mountings), required power supply: 230V / 50 Hz, 1 phase (220V), water inlet, water outlet, delivery included Test equipment consumables consisting of: Nledpfscwamxox Af Ssg • 5 x 1 kg (5 kg) different investment materials • 1650 watt heating power • up to 200 ° C embedding temperature • Embedding time adjustable up to 60 minutes • automatic cooling cycle • no compressed air required • 12 month warranty Delivery by forwarding agent to the factory in Germany (Optional installation by our technicians on site)

Condition: used, Year of construction: 2005, functionality: unexamined, overall weight: 1,500 kg, total length: 1,250 mm, total width: 1,250 mm, plate height: 150 mm, plate width: 1,250 mm, plate length: 1,250 mm, Equipment: type plate available, FIBRO 4x Precision Changeable Pallet 1250x1250 mm / 1,500 kg / Pallet Changing System Description Manufacturer: FIBRO GmbH, Rotary Table Division Type: Precision Changeable Pallet 1,250 × 1,250 mm Year of Manufacture: 2005 Quantity: 4 pieces Package consisting of 4 solid FIBRO precision changeable pallets from an industrial pallet changing/rotary table system. The pallets were used as a machine interface and as a carrier for large workpiece clamping devices. These are not simple clamping plates, but precisely manufactured changeable pallets with indexing, pallet clamping, and integrated pneumatic transfer. Each pallet has a clamping surface of 1,250 × 1,250 mm and a weight of approximately 1,500 kg. The top surfaces have different, customer-specific hole patterns. The pallets are equipped on the underside with two mounted and aligned indexing rings each. The clamping slots have hardened strips as running and contact surfaces. In addition, each pallet has a pneumatic connection with one line. Technical Data - Quantity: 4 pieces - Dimensions per pallet: 1,250 × 1,250 mm - Height: approx. 150–160 mm - Weight: approx. 1,500 kg per pallet - Total weight of 4 pallets: approx. 6,000 kg - Pneumatic connection: 1 line per pallet - Indexing: P1 / P2 - Underside: 2 indexing rings per pallet - Clamping slots with hardened strips - Thread/hole patterns including M12, M20 and M30 - Customer-specific hole patterns - Original drawings or technical FIBRO documents available Nledpfxozxz Aze Af Ssg According to the manufacturer's data, the documented plan parallelism of the pallet top to the bearing surface is 0.025 mm, and the flatness is 0.040 mm. These are explicitly the original manufacturer's values and not a current measurement of the used pallets. Factory/Serial Numbers 1817739 / 002 1817739 / 003 1817739 / 004 1817739 / 005 The pallets have partially different article numbers and different customer-specific hole patterns. Accessories: The offer also includes the mechanical guide and rail set of the pallet changing system shown in the pictures, consisting of roller/guide rails, solid guide and support strips, stop and guide elements, and the existing fastening parts. Condition: Used condition from industrial application. The clamping surfaces show corresponding machining, clamping and wear marks, as well as some discoloration and superficial corrosion marks. The existing hole patterns originate from the original application. A current metrological check of the geometric accuracy has not been carried out. Sold in the existing condition and scope of delivery as shown in the pictures.

Condition: excellent (used), Material Testing Machine / Universal Testing Machine Type: BT2-FZ1.0TN.D16.001 Base System: zwickiLine Z1.0 TN Special Torsion Multi-Axis Material Testing System 1 kN / 2 Nm Technical Data: Testing Range: Maximum axial testing force Fmax: 1 kN Configured maximum testing torque Mmax: 2 Nm Types of tests: Tensile, compressive, and torsional Axial drive / crosshead: Crosshead speed: 0.0005 to 2,000 mm/min Max. return speed: 2,000 mm/min Speed deviation: max. 0.05 % Path resolution: 0.0554 µm Positioning repeatability: ±2 µm Controller: adaptive Control cycle: 1,000 Hz Testing chamber: Testing chamber height with crosshead angled upwards: 235 to 1,065 mm Testing chamber height with crosshead angled downwards: 90 to 920 mm Testing chamber depth: 105 mm Dimensions of base machine: Height of load frame without head crosshead: approx. 1,289 mm Width with machine electronics: approx. 411 mm Depth with machine electronics: approx. 622 mm Weight of base machine: approx. 76 kg Type: Torsional drive Item No.: 1023835 Nodpfx Afezwvtxj Sslg Maximum drive torque: 20 Nm Rotational speed: 0.01 to 20 rpm Accuracy of set drive speed: 0.05 % Control cycle: 1,000 Hz Axially permissible testing force on the torsional drive: ±5 kN Power connection torsional drive: 230 V / 1 Ph / N / PE Mains frequency: 50 / 60 Hz Power consumption under full load: approx. 2.3 kVA Torque sensor: Item No.: 069536 Rated torque: 2 Nm Limit torque: 150 % of the rated torque Accuracy class 1 from: 0.008 Nm Accuracy class 0.5 from: 0.02 Nm Protection class: IP65 Force sensor: Type: Zwick / Roell Xforce HP Item No.: 069531 Rated force: 1 kN / 225 lbf Max. operating force: 150 % of Fnom Accuracy class 1 from: 2 N Accuracy class 0.5 from: 10 N Protection class: IP54 Measurement and control electronics: Zwick / Roell testControl II Measurement value acquisition rate: 400 kHz Measurement value transfer to PC: 500 Hz Optionally expandable to: 2,000 Hz Control cycle: 1,000 Hz PC interface: Ethernet Measurement signal runtime correction: for all channels Protection class electronics: IP32 Safety device: Swiveling front safety device Electrically monitored interlock Protective screen made of transparent polycarbonate Material thickness of protective screen: 6 mm Dimensions of safety device: Height: approx. 1,237 mm Width: approx. 435 mm Depth: approx. 238 mm Testing tools / accessories: Pneumatic universal holder for pen systems Max. clamping force: 200 N Compressed air supply: 8 bar, filtered and unlubricated Pneumatic 3-finger gripper Max. clamping force: 50 N Compressed air supply: 8 bar, filtered and unlubricated Alignment unit Torque sensor 2 Nm Xforce HP force sensor 1 kN Torsional drive Front safety device Zwick/Roell machine electronics Software: Zwick / Roell testXpert III testing softwareVersion: 1.2 + ALMEMO 2450 universal measuring device Humidity/temperature sensor FHAD4641 + Mettler Toledo precision balance Type: Mettler WXSE + Visual recognition system color Zwick Item No.: 3004644 Vision sensor: IV-G500CA Evaluation unit: IV-G10 Installation distance: 20 to 500 mm + Auto Injector Condition: used Optical condition according to the pictures Functionality according to the pictures The complete configuration of all components and accessories, as well as the calibration of the system, must be carried out by the customer themselves. Subject to changes, errors and prior sale.

Condition: used, mileage: 154,360 km, power: 103 kW (140.04 HP), first registration: 09/1998, fuel type: diesel, empty load weight: 3,920 kg, maximum load weight: 3,580 kg, overall weight: 7,500 kg, tire size: 365/80R20, axle configuration: 4x4, wheelbase: 2,830 mm, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, number of seats: 2, loading space length: 1,950 mm, loading space width: 1,900 mm, loading space height: 400 mm, Equipment: additional headlights, all wheel drive, cabin, differential lock, low noise, power assisted steering, trailer coupling, Vehicle location: Bovenden, steel body, short cab, high roof, air-suspension seat, rear window, 8-speed gearbox, ABS (anti-lock braking system), constant throttle, auxiliary drive, raised exhaust, differential lock, long-range headlights, rotating beacon, trailer hitch ball, towing device, low-noise G1, winter service equipment, swing-out tailgates, roof hatch. Wheelbase: 2830 mm, Body: 3-sided tilting body, axle ratio: slow, trailer brake system, two-line, mounting brackets front, mounting brackets rear, higher cab roof, fine dust and pollen filter, sound and heat insulation for cab, auxiliary transmission with intermediate and super-crawl gear, dual clutch, shift plate, hydraulic system with 4 circuits, tilting cylinder, hydraulic connection at the rear 6-way, hydraulic connection at the rear 4-way, cell 3+4, separate return line at the rear, hydraulic connection at the front 4-way, cell 1+2, hydraulic connection at the front 4-way, cell 3+4, separate return line at the front, engine brake, engine PTO switchable, PTO front 1 3/8 keyway, PTO rear split 1 3/8 keyway. Loading height approx. 1420mm! Nedpfx Afezx Tlzj Sslg Approx. €3,000.00 invested (paint, refurbishment and technology). Matching snowplow -9996- available for an additional charge of €1,500.00 net! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: new, neu 080244 November 2026, Zwischenve Slowakei 26400 € 504.24 € 40 to 1500 mm X und Y Achse 100 mm 310 mm hydraulisch 38 l 6 kW 2000 mm 950 mm 1900 mm 1800 kg 420 mm 1 10 mm/s 12 mm/s 40 mm/s 0.02 +/- mm 0.05 +/- mm 2 axes(Y andX) motorized backgauge with push button and manual fine adjustment with counter preselection of press depth Y and upper dead point intermediate piece with quick-release lever for upper tool clamping upper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divided die type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided 2 support arms according to CE rules oilfilling Nedpfjwiqnqex Af Sslg user manual in German

Condition: used, mileage: 119,750 km, power: 120 kW (163.15 HP), first registration: 05/2020, fuel type: diesel, maximum load weight: 956 kg, overall weight: 3,500 kg, tire size: 16 Zoll, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 4,200 mm, loading space width: 1,700 mm, loading space height: 1,900 mm, Year of construction: 2020, number of previous owners: 1, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, power assisted steering, sliding door, summer tires, traction control, The vehicle is in top technical and optical condition. The vehicles for sale are checked and repaired in our master workshop. Non-smoking vehicle Equipment: First owner, ABS, ASR, ESP, hill start assist, crosswind assist, airbag driver, 3. Brake light, electrically adjustable and folding exterior mirrors, electric windows, ISO-FIX (child seat fastening system), headlight range control, light sensor, fog lights with cornering light, radio central locking and immobilizer, electric interior lock, automatic air conditioning, hands-free system, on-board computer (MFA), height-adjustable driver's seat, health seat, armrest for driver's seat, cup holder, power steering, steering wheel adjustment, multifunction steering wheel, cruise control, reversing camera, DAB radio, MBUX multimedia system with 7-inch touchscreen, sliding door right, rear hinged doors sheet metal, summer tires, wheelbase 4325mm, overhang 1615mm, 3.5 tonner, Rear axle level control, spare wheel, mud flaps front and rear, main tank 93 liters, lashing eyes in load compartment, load compartment cladding, wooden floor, lashing eyes for cargo, 16-inch tyres, electrics for trailer socket, DPF EURO6 Total weight: 3500kg Payload: 956kg Towing capacity: 2000kg Interior load compartment length: 4.20 Width: 1.70m Height: 1.90m We are happy to take your wishes into account and can carry out various retrofitting work in our workshop: Towing hitch from € 800,- Rear parking sensors from € 400,- 1 year Auto Helle warranty according to the warranty certificate. Last oil service with oil, fuel and pollen filter at Mercedes with 102,783km in May 2023 Service interval 50,000km Nsdpfxjufluto Af Solg New air conditioning service and intermediate inspection at 119,750km Current vehicle inspection Complete service booklet or digital service certificate Both rear shock absorbers, front brake pads, rear brake pads, new at 119,750 km Repair - service - reconditioning costs included in the purchase price. Bank loan possible Subject to alterations and errors excepted.

Condition: repair required (used), Year of construction: 2019, pressing force: 220 t, overall weight: 12,620 kg, controller model: Delem DA-66T, working width: 3,050 mm, number of axes: 6, The press brake cannot be aligned because the X and R axes are blocked. This is a machine that is to be repaired or is intended for a project. TECHNICAL DETAILS Number of axes: 6 Axes: Y1 + Y2 + X + R + Z1 + Z2 Press force: 220 t Max. working width: 3,050 mm Frame spacing: 2,500 mm Crowning system: CNC-controlled Ram holder: hydraulic Tool holder type: WILA standard MACHINE DETAILS Drive: CNC Control: Delem DA-66T Power: 22 kW Dimensions & Weight Dimensions (L x W x H): 3,750 x 1,900 x 2,900 mm Weight: 12,620 kg Transport packages: 1 Nsdozuw Ewjpfx Af Selg EQUIPMENT Tools

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, input voltage: 230 V, measuring range X-axis: 200 mm, measuring range Y-axis: 85 mm, measuring range Z-axis: 50 mm, total width: 483 mm, total length: 598 mm, total height: 464 mm, overall weight: 64 kg, input current: 5 A, repeat accuracy: 0.005 mm, input frequency: 50 Hz, Equipment: CE marking, USB port, documentation/manual, type plate available, PG1000-400 – Optical system for inspecting the geometry of rotating cutting tools PG1000-400 is a professional optical measuring and inspection system for quickly checking the geometry of cutting tools. It is designed for tool manufacturers, sharpening shops, grinding shops, tool rooms, CNC machining centers, and quality control/metrology departments. Its main application is the inspection of rotating cutting tools after manufacturing, grinding, sharpening, or reconditioning. The system is suitable for HSS and solid carbide tools, especially drills, end mills, step drills, reamers, taps, form tools, micro tools, and custom-made tools. The device can also be used to inspect carbide inserts, selected thread geometries, screws/bolts, and other precision parts, provided that the geometry being inspected is optically accessible to the camera. The system's primary focus is on the inspection of cutting tool geometry. Typical applications: - In-process inspection directly at the grinding machine or in production - Incoming and outgoing inspection of tools - Inspection after sharpening/regrinding - Quality documentation and measurement reports - Repeated inspection of serially produced tools PG1000-400 allows for the inspection of, for example: - Rake angle and clearance angle - Helix angle - Point angle for drills - Radii and corner radii - Diameters and distances - Cutting edge length - Land width, margin width, facets - Web thickness - Tool profile - Runout - Condition and wear of the cutting edge - Comparison of geometry with DXF/DWG drawings The system operates optically and non-contact. This is advantageous when inspecting sharp edges, fine microgeometries, coated tools, and precise edges, where speed, repeatability, and minimizing operator influence are important. The system includes REACTION software, developed specifically for the inspection of cutting tools. The software offers more than 50 measuring functions, edge detection, automatic alignment of measuring points to the edge, saving inspection scenes, comparison with DXF/DWG geometry, PDF reports with PASS/FAIL evaluation, and data export to Excel/CSV. Technical specifications: - Recommended tool diameter: 0.635–75 mm - Tool measuring length: approx. 190–200 mm - Magnification range: 12.5× to 145× - Camera: 5 MP - Monitor: 27" 4K Ultra HD - Measuring range: 85 mm vertically × 200 mm horizontally - Accuracy/repeatability: ±5 µm at maximum magnification - Device dimensions: approx. 598 × 483 × 464 mm - Weight: approx. 64 kg Offered configuration: - PG1000-400 optical cutting tool inspection system - M / F / A encoders - PC with REACTION software - 27" 4K Ultra HD monitor - Flexible LED lighting with diffuser - Curved magnetic diffusion plate - Rotating base block for clamping fixtures - 1000-026-5"-ASS – 5" V-block assembly with insert, top clamp, and stop - Basic remote operator training About the manufacturer: PG1000 is based on the long-term development of systems for inspecting cutting tools. The first generation of PG1000 was introduced in 1993. The system is manufactured in the USA by PG Inspection Technologies LLC, which specializes in this product line. Since 1996, more than 1000 PG1000 systems have been delivered. Nlsdpozdz S Tefx Af Ssg Condition and delivery: - New machine - Year of manufacture: 2026 - Warranty: 12 months - Location: Czech Republic / EU - Delivery, assistance with commissioning, and training according to agreement - CE marking and relevant EU documentation The device i

Condition: used, Year of construction: 2018, X TRAVEL 3000 MM Y TRAVEL 1800 MM Z TRAVEL 1800 MM SPINDLE TAPER ISO 50 SPINDLE SPEED RPM.5000 SPINDLE MOTOR POWER 25KW TABLE MM.1500x1750 CAPACITY 10TON CNC HEIDENHAIN 530 HR520 remote control panel with display for Heidenhain CNC Manual head attachment to the RAM/VERTICAL SLIDE. Direct-drive universal head indexed, 360,000 positions. Nledpfx Afezwl Edo Ssg ATC 46POS. Laser probe and software for tool integrity verification and tool length and radius measurement Workpiece measurement and alignment probe External/internal tool coolant, 800 L tank, pressure = 40 bar Compressed air internal tool coolant Control station Roofless perimeter enclosure Work area lighting Chip conveyor positioned to the right of the machine YEAR 2018

Year of construction: 2015, condition: good (used), Rebuilt: 2015 Size: max 510 x 305 x 60 mm min 140 x 100 x 3 mm Cover size: max 640 mm min 203 mm Nledpfjd Afayox Af Ssg Speed max: 10.000 c/h Equipment gathering machine: 18 feeders 210 controls: miss and double sheet control intermediate elements: spiral race away jogging element perfect binder: 20 clamps clamp pitch 24" milling and roughening station hot melt spine gluing unit hot melt side gluing unit 2 premelters S stream cover feeder S cover nipping and pressing station

Year of construction: 2004, condition: good (used), Year of Construction: 2004 Nedpfxjh Ir E Eo Af Solg Description: Transforms the shingled stream behind a web press into counted and compensated stacks for further processing or distribution. No. of products per layer / stack are easily programmable. Details as shown below. Speed: 90.000 cph (product permitting) min format product (head/foot x spine): 102 mm x 145 mm (4.00" x 5.75") max format product (head/foot x spine): 320 mm x 500 mm (12.63" x 19.68") max pagination: 48p Product orientation: Spine leading Low Infeed Infeed height (min/max in mm): 600-1200 mm Waste gate Stream Aligner / Jogger Single squeeze roller Laser Counter, model: Baumer Scatec-1 Upper bin height in mm: 210 mm Upper Bin with 3 forks Turntable with compression plates max Stack height in mm: 330 mm Servo turntable Pneumatic pusher Delivery Direction to the right Delivery height in mm: 876 mm (34.50“) Air Delivery Table included Over all length equipment: 2650-2950 mm Over all width equipment: ~700 mm Over all height equipment: ~1800-1950 mm Input Power: 3 kVA, 50/60 Hz, 3 ~ Air requirement: 170 l/min 5.5 bar (6 cfm 80 psi) Weight: 945 kg (2100 lb) Equipment at Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) Mechanical / electrical machine test possible Condition: cleaned & in working conditions

Condition: good (used), Year of construction: 2001, Year: 2001 Size max 510 x 310 mm min 140 x 100 mm Book block thickness max 60 mm min 3 mm Cover size max 642 mm min 203 mm Speed max 15.000 c/h Consisting of: Gathering machine Müller Martini 3681 Description: - Chain tensioning station - 22 gathering stations - 20 gathering feeder 3681 - ASIR Automatic Signature Image - ASAC automatic self adjusting calliper - 1 Reject gate 3717 for incomplete products - 2x 3643 Intermediate element with vibrating - 1x 3642 Book block feeder base with feeder - 1x 3643 Intermediate element with vibrating - Transfer into the binder Perfect binder Müller Martini Corona 3010 C15 S-31 Year: 2000 Description: - Semi automatic setting - Commander - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Base for 1st spine glue system - 1st hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: ICS C80 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit - Base for 2nd spine glue system - PUR spine glue unit, interchangeable - Stream cover feeder - Scoring station - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Transport system - Trasportbelts aprox 60 meters - Escape delivery Book block splitter Müller Martini 3501 Year: 2000 - Bypass belts - turn over belt Three knife trimmer Müller Martini 3672 Zenith Year: 2001 Description: - Semi automatic setting - Left hand infeed - Integratedcounter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 4 – 17 Njdpozhukwsfx Af Sslg Book stacker Müller Martini 3631 CB 16 Description: - Compensating stacker - Delivery to the left and right Condition Available immediately The machine is fully visible during operation

Condition: used, Year of construction: 2025, functionality: fully functional, type of input current: AC, overall weight: 4 kg, input voltage: 230 V, Equipment: documentation/manual, type plate available, For sale is a ZEISS GOM Scan 1 MV400, a high-precision optical 3D scanner for demanding measurement and inspection tasks. Ideal for precise 3D measurements in industry and research. Fast setup, easy operation. Condition: Like new, little used, primarily used for trade shows, exhibitions, and training. Scope of delivery: ZEISS GOM Scan 1 MV400 Original accessories according to standard configuration Power supplies and cables 10 m cable Transport case available Tripod and PC are not included in the offer and will not be provided, but can be offered separately upon request. ZEISS INSPECT OPTICAL 3D Free Open and edit new and existing projects Import of point clouds, polygon meshes Creation, editing, and processing of polygon meshes Element construction: regular geometries, points, sections, curves, surfaces, dimensions CAD import of standard formats IGES, VDA, STEP, JT Open, STL, PLY Application of common alignment methods Comparison against CAD with colored deviation display Dimensional and form/position evaluations according to ISO GPS and ASME Y14.5 Report module Nlsdpfxozypzue Af Sog Note: The device has only been used for demonstration, training, and presentation purposes. A new 3D acceptance certificate will be provided upon purchase. Furthermore, we would offer to take in used optical GOM or Zeiss systems in part exchange upon purchase of the Zeiss GOM Scan 1 MV400.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, type of input current: three-phase, total width: 3,000 mm, total length: 17,600 mm, input voltage: 380 V, overall weight: 13,000 kg, GRASSI 145 folder gluer, designed for the production of folding cartons and micro-flute packaging. The machine is currently in production, regularly maintained, and in very good technical condition. It is suitable for manufacturing a wide range of carton styles, including straight-line cartons, crash-lock bottom cartons, 3-, 4-, and 6-corner boxes, as well as custom angled-glued constructions. Technical Specifications: * Manufacturer: GRASSI * Model: 145 * Year of manufacture: 1997 * Working width: 1450 mm * Minimum blank size: 310 × 80 mm * Maximum production speed: up to 145 m/min * Solid board processing capability: up to 700 g/m² * Materials: folding carton and micro-flute board * Box styles: * Straight Line * Crash Lock Bottom * 3-Corner * 4-Corner * 6-Corner * Custom angled-glued carton constructions * Closing section: 2- and 4-crease * Belt width: 38 mm * Power supply: 3~380 V / 50 Hz * Total installed power: 80 kW * Compressed air requirement: 6–8 bar * Machine dimensions: 17.6 × 3.0 m * Machine weight: 13 tons Equipment: * Three independent operator control panels located in different machine sections * Main operator panel with display * Delivery section camera with live monitoring * Remote control operation * Servo-driven machine sections * Vacuum belt feeder * Air blowers for transport belts * Delivery alignment system * Quick and easy adjustment of closing hooks Nljdpfx Aeztbxxjf Sog * Additional production tooling included Optional Gluing Systems: The machine is supplied without a gluing system as standard. For an additional charge, the customer may choose one of the following three professional gluing systems: * KAS * Robatech * HHS All gluing systems are fully operational, currently used in production, and can be demonstrated and tested during the machine inspection. Technical Condition and Production Trials The machine is in continuous production and can be inspected under power. It operates reliably, providing consistent, high-quality folding and gluing performance. The buyer has the opportunity to: * perform production trials using their own carton blanks, * test the selected gluing system, * inspect the machine during live production, * review the technical documentation during the inspection.

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 222 h, load capacity: 4,100 kg, lifting height: 7,600 mm, fuel type: diesel, construction height: 2,420 mm, fork carriage width: 50 mm, empty load weight: 9,160 kg, drive type: Diesel, construction width: 2,390 mm, Telescopic handler, rigid frame Condition, technical: New Front tire size: TRELLEBORG - TH400 - 500/70 R24 164A8 Front tire condition: NEW Rear tire condition: NEW Rear work lights, front work lights, full cab, safety light, electrically heated rear-view mirrors, intelligent hydraulics, LED work lights, telescopic boom, Easy Connect System ECS, regenerative hydraulics, vibration damping, hydraulic quick-change system, tilt function shut-off, JSM LED, 4 additional work lights, LED work lights front and rear on the cab, 2x LED each, front road lighting, radio USB, Bluetooth with external microphone 100W, Safeview camera package x2 rear right side, automatic air conditioning, Nedpfowqtx Ujx Af Sjlg air-suspended textile low-frequency seat Grammer Pack Elite, automatic wheel alignment, 7-inch display, manual hand throttle, Eco - Stop, flow limiter, height-adjustable automatic trailer hitch, 40 mm pin, TÜV preparation, 40 km/h, electrical connection at the boom head, accessory kit, return line, trailer hitch completion kit, Easylink STD module, chocks, operating manual, compressed air system, central lubrication system.

Condition: good (used), Year of construction: 2017, 3D Printer ORLAS CREATOR SLM250, MFG 2017,-the equipment shows little use; the tablet has a cracked screen; it does not have a 3D scanner component, SN: SLM250172801 makes complex parts, using metallic or non-metallic powders; wireless controller; benchmark dimensions achieved: 100 x 100 mm; gas used as protective atmosphere: argon/nitrogen; layer size: 20-100 micrometers; laser type: Yb Fiber Laser 250 W; wavelength: 1070 nanometers; Precision F-Theta lenses; dimensions: 717x858x1794 mm; mass: 470 kg; specific software: Creator user interface, APP Suite application "3D printing"; IMPORTANT: The equipment shows little use; the tablet has a cracked screen; it does not have a 3D scanner component; Specifications Building volume: ø = 110 mm x 100 mm Powder reservoir volume: ø = 110 mm x 200 mm High power 250W cw Yb: Fibre laser Wave length: 1070 nm High efficiency Exceptional beam quality and power stability Air cooled Nljdpfjunaqvsx Af Sog Spot size: 40 µm - 120 µm Process chamber • High-end process chamber, suitable for low-oxygen process environment • Recommended inert gas: Argon / Nitrogen • included extraction unit for cleaning of the process environment (max. flow rate: 190m³ / h) Coating system - 360° circulating coater for high efficient coating process - Rubber coating blade - Micrometre screws for optimum coater alignment User interface - 12’’ Microsoft Surface Pro 3 tablet controller - Unique wireless control concept - Easy control of all printing parameters - Cloud manufacturing concept Dimensions - System dimensions: 717 mm x 858 mm x 1794 mm - Machine opening: 450 mm x 180 mm - Power supply: (V/Ph/Hz): 230/1/50 - Power setting: max. 10 A - Weight: 430 kg CAD / CAM Software APP SUITE, including 3D printing application - solid slicing of 3D objects - extended repair functionality of 3D parts - automatic generation of support structures - complete control of all printing strategy Parameters Welcome Package - - APP SUITE Software Basic Package - - Accessories Zero-Point Clamping System - - Adjustment aid for aligning the construction platform - - Hose adapter for inert gas supply 6mm to 1/4inch - - Cleaning cloths and optics cleaning liquid - - ESD brush for safe system and component cleaning - - Allen key set - - Stainless steel shovel Price Euro 38,900 Euro + VAT, FCA: Bucharest/ Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2007, condition: as good as new (ex-display), machine/vehicle number: 31495, SOXHLET EXTRACTION UNIT -SEMI-AUTOMATIC RAYPA SX-6 System for extracting fats or solvents soluble in a solvent using methods Soxhlet and Randall. Compatible with a wide range of samples. Extraction system with solvents, according to Randall method for fat and soluble materials determination, in food, feeds, soils, detergents, polymers, paper pulp, fibres, rubbers, textiles, petrochemical products, pharmaceutical products, etc. Furniture in stainless steel, epoxy resin painted. Heating by an electric plate with an armoured heater to assure homogeneous distribution of heat. Control of temperature by a microprocessor with P.I.D. action and probe Pt100 class A. Over-temperature safety control by independent thermocouple. Vitón® seal set. In accordance with standardized international methods: AOAC, ISO, AACC. Advantages Independent programming of “boiling” extraction time and “rinsing” extraction time. Specifications Working range of temperatures: room temperature +5 ºC to 220 ºC. Solvent volume: up to 50 ml. Sample max. volume: 25 ml. Solvent recovery: 60-70%. Reproducibility: ±1%. Extraction cartridge Ø ext 26 × 60 mm. “boiling” extraction time: 0-99 h. “rinsing” extraction time: 0-99 h. Extraction speed: 30-60 min. Electric protection IP65. NOTE: Components supplied with our equipment: Nodpfx Afefiulfo Sjlg 18 extraction vessels + magnetic adapter. 3 racks for extraction cartridges. 3 racks for extraction vessels. Aligning rack. Box containing 25 thimbles. Documents: Instruction manual for use and maintenance in Romanian and English. Year of manufacture 2007, never used • For the Romanian companies there is the possibility of selling in instalments. Price Euro 2.350+ VAT Ex Works Loaded of FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: good (used), Year of construction: 2013, Double mitre saw for aluminium The saw blades can be swiveled and tilted. Control system: E355 Includes circular saw blades and extraction unit Technical data: Smallest cutting length at 90°: 375 mm Largest cutting length: 4500 mm Swivel angle inwards pneumatic: 90° - 45° (Manual up to 22.5° inwards and up to 140° outwards with digital display) Tilting angle inwards pneumatic: 90° - 45° Nsdeyw R Rzepfx Af Sjlg (Intermediate angles manually adjustable with digital display and turret stop) Saw blade diameter: 550 mm Saw blade speed: 2250 rpm Power output per motor: 4 kW Dimensions: approx. 5790 / 1840 / 1985 mm Weight approx.: 2110 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, We are offering for sale a complete, fully functional ZREMB concrete plant, designed for the production of ready-mix concrete, precast elements, and paving stones. The plant is equipped with high-quality components from reputable manufacturers, automatic control, and a modern recycling and heating system, enabling year-round production. Key equipment: ZREMB Concrete Plant • Complete steel structure with enclosure, • Automatic control system SAUTER GmbH SUS 4.0, • Control container, • Full automation of the production process. ORU Mixers • Planetary mixer 750 l, • Planetary mixer EPM 3000 ES (3000 l), • EPM 3000 equipped with two independent discharge outlets, increasing production capacity. Dosing System • Lifting and filling device, • Tipping skips, • Buffer tank above the mixers, • Aggregate distributor for two mixers, • Cement scales for both mixers, • Water scale with flow meter, • Chemical additive dispenser, • Liquid pigment dispenser, • Microwave moisture probes in the mixers and aggregate tanks. Material Storage • Aggregate storage silo 6 × 25 m³ with a roof, • Aggregate belt scales, • 3 cement silos with complete equipment, • 1 two-chamber silo, • 5 screw conveyors. FEGO INDUSTRY Recycling System Complete installation for concrete and washout water recovery: • Capacity 12 m³/h, • Aggregate washing 2–32 mm, • Aggregate separator, • Washout water tank 40 m³, • Intermediate tank 1.5 m³, • Recycling tank, • 3 slurry pumps. FEGO INDUSTRY Heating System Water heating • Boiler 255 kW, • Capacity: • 13,500 l/h (10°C → 45°C), • 6,750 l/h (10°C → 70°C), • Fuel: light fuel oil, • Fuel consumption: 21.5 kg/h. Aggregate heating Hot air system: • Thermal power 250 kW, • Air temperature 110–120°C, • Capacity 6500 m³/h, Nledpezw Aq Rofx Af Sjg • Fan 18.5 kW. Thanks to the installation, production is possible even during the winter season. The sale also includes: • Complete supporting structure, • Working platforms, • Enclosure made of sandwich panels, • Technological installations, • Electrical installations, • Complete control system, • Technical documentation (if available). Advantages - Automatic concrete production - Two independent ORU mixers - Two discharge outlets from the EPM 3000 mixer - Complete washout water recycling - Water and aggregate heating - Possibility of operation throughout the year - Complete installation ready for dismantling and reassembly Interested parties are invited to contact us by phone at 605 583 061 to obtain detailed information and arrange a presentation of the equipment.

Condition: used, mileage: 749,448 km, power: 301 kW (409.25 HP), first registration: 03/2006, fuel type: diesel, number of seats: 61, gearing type: mechanical, emission class: euro4, color: other, brakes: retarder, Year of construction: 2006, Equipment: ABS, air conditioning, cruise control, navigation system, trailer coupling, = Additional Options and Accessories = Nljdpfszy Evbjx Af Sog - DVD player - Air conditioning - Front refrigerator - Sleeping cabin - Toilet - Webasto heater = Additional Information = Height: 380 cm Damage: none = Company Information = We are an international company based in Belgium, near Brussels (+/- 20 km). Belgian Bus Sales is your ideal partner for the buying and selling of used buses and has a large parking area that serves as a showroom. We always have numerous buses of all brands, capacities, and models in stock, and at every price level. We can find the right tourist, school, or regular service bus for you, tailored to your needs or budget. All information is provided without warranty. Errors, intermediate sales, and typographical errors excepted. Opening hours for viewing the used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. (We speak Polish: Agata). We speak your language: Dutch, French, English, Spanish, Portuguese, Italian, Russian, Polish, and more.

Condition: excellent (used), Year of construction: 2025, total length: 4,600 mm, total width: 2,000 mm, overall weight: 600 kg, This heavy-duty industrial stainless steel platform is designed to meet high hygiene and load requirements. It is ideally suited for use in the food industry, pharmaceutical production, chemical processing, or agriculture. Thanks to the integrated filling openings, it is particularly suitable for feeding machines, mixers, or filling stations positioned underneath the platform. Technical Data & Dimensions Manufacturer: GRT Projects Year of manufacture: 2025 Condition: Like new Total area: approx. 9.2 m² Length: 4,600 mm Width: 2,000 mm Platform height: 1,750 mm Net weight: approx. 600 kg Material: High-quality stainless steel, corrosion-resistant and easy to clean and disinfect Equipment Safe standing and walking surface: Heavy-duty stainless steel chequer plate for high slip resistance. Raised edge protection / toe boards around the platform help prevent tools or small parts from falling. Nsdozz H Nfepfx Af Selg Complete fall protection: Stable stainless steel tubular guardrail around the platform with handrail and intermediate rail. Comfortable access: Includes matching stainless steel stairs with perforated, slip-resistant safety steps and guardrails on both sides. Process openings: Integrated filling openings in the platform floor for direct material feeding. Condition: The platform is in excellent, virtually new condition. Everything from a single source: We will be happy to offer you suitable bank financing for your project. komplett-konzept.leasingo.de

Condition: used, Year of construction: 2012, - Work area: X: 9000 mm / Y: 2700 mm - Gantry 1: 5-axis milling spindle 20/26 kW - 32-position tool changer - Gantry 2: 2x13 spindle drilling unit Technical data - Heavy-duty gantry system with 2 gantries - Gantries with drives on both sides (gantry drive) - CNC control SIEMENS 840D sl / PCU 50 with NCU 730 - Operator panel OP 15 with 15" display, mounted on a guide rail along the longitudinal axis Nodozuw Ixopfx Af Sjlg Work area / machinable cube size with tool length/diameter of 160 mm - X-axis: 9000 mm with both gantries - Y-axis: 2700 mm - Z-axis: (Standard cube size 420 mm) - Customer-specific design for workpiece thicknesses up to 60 mm - 5-axis head Equipment, Gantry 1 - 1 universal head for 5-axis milling - Milling spindle power: 20/26 kW (S1/S6) - Speed adjustable up to 24,000 rpm - Water-cooled - Tool interface HSK F63 for automatic tool changes - Thread cutting is possible! - 1 chain-type tool magazine with 32 positions - With rotary gripper for fast tool changes - Magazine fixed on the operator side Equipment, Gantry 2 - 2 head mounting brackets - Equipped with 2 heavy-duty multi-spindle drilling units each - With common dust extraction hood - Each drilling unit with 13 drilling spindles (total of 26 drilling spindles) - Individually selectable vertically - Arrangement in an L-shape - 2 angled drilling spindles adjustable from 0 - 25° - 1 right, 1 left, each approx. 2.2 kW, n= 2800 rpm - Drill chuck collet Rego Fix ER 25 M Machine table - Base frame with linear guide - 12 table traverses on a linear guide for positioning in the X-direction, individually driven and positionable via NC drives - Vacuum supply integrated into the table traverse - Each traverse is individually vacuum-monitored and linked to the machine control system Workpiece infeed function - 1 belt conveyor consisting of 4 belt strands - Width 40 mm, each traverse with lifting devices - Lifting device NC-controlled - Stroke 110 mm (+10 mm, -100 mm) - The machine should be installed in a foundation pit of approx. 300 mm - Vacuum pump Bush type: Mink MM 1322 - Suction capacity 250 m³/h - With intermediate tank 500 l for rapid vacuum generation - 2 chip transport belts under the machining area for the removal of chips and/or small swarf up to a size of max. 100 x 100 x 100 mm - Automatic central lubrication Work safety - Moving protective cabin on both gantries - Protective cabin with safety bumpers and safety light curtain system on the operator and rear sides (due to automatic table adjustment)

Condition: used, Year of construction: 1998, Window manufacturing system Manufacturer: Weinig Type: Unicontrol 10-5 Njdpozuyxgefx Af Selg Year of manufacture: 1998 Technical data Working width: 40 - 220 mm Working height, longitudinal machining: 40 - 100 mm Working height, transverse machining: 40 - 100 mm (80 mm counterpiece height) Workpiece length, longitudinal machining: min. 220 mm + 2 x tenon length Workpiece length, transverse machining: min. 275 mm + 1 x tenon length at 320 mm tool diameter Feed (transverse machining) Motor power: 0.3 kW Feed speed: 3 - 25 m/min Workpiece clamping: by means of 2 clamping jaws Length stop: with scale and magnifying glass for frame or sash outer dimensions Counterpiece: pneumatically controlled - 4 positions - (not for studio windows) up to a wood height of max. 80 mm Double part package: For single or double part feeding. With transverse separation and retention system 1. Wood (lying against the stop) Wood width: 55 - 90 mm 2. Wood Wood width: 130 mm Feed (longitudinal machining) Motor power: 2.2 kW Feed speed: 4 - 18 m/min (continuously variable via frequency converter) Feed roller spacing: 100/120 mm Feed roller width: 30/50 mm Feed roller diameter: 95 mm Machining units Cut-off saw Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 2800 rpm Tool circle diameter: max. 400 mm Adjustment, axial: pneumatically controlled against a 4-position turret 1. Tenon and mortise spindle Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 3250 rpm Tool circle diameter: max. 320 mm Tool clamping length: 320 mm Adjustment, axial: 240 mm Number of tools: 4 x 80 mm Axial adjustment: hydraulic 1. Profiling spindle Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6000 rpm Tool diameter: max. 232 mm Tool zero circle diameter: 130 to 140 mm Tool clamping length: 320 mm Adjustment, axial/radial: 240/80 mm Number of tool positions: 4 x 80 Axial adjustment: hydraulic 2. Profiling spindle Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6000 rpm Tool diameter: max. 232 mm Tool zero circle diameter: 130 to 140 mm Tool clamping length: 320 mm Adjustment, axial/radial: 240/80 mm Number of tool positions: 4 x 80 mm Axial adjustment: hydraulic 2 Mechanical spindle brake for profiling spindle 3 Mechanical spindle brake for cut-off saw and profiling and sawing units Profiling milling unit (horizontal, top) before the last profiling spindle radially controlled to 2 positions axially controlled to 2 positions Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 5850 rpm Tool circle diameter: 130 mm Tool clamping length: 40 mm Adjustment, axial: 52 mm Adjustment, radial: 125 mm Profiling milling unit (vertical, right) at the end of the machine radially controlled to 2 positions axially controlled to 2 positions Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 5850 rpm Tool circle diameter: 210 mm Tool clamping length: 160 mm Adjustment, axial: 90 mm Adjustment, radial: 100 mm Length, tenon and mortise spindle with 640 mm tool clamping length (instead of 320 mm spindle) Motor power: 15 kW Spindle speed: 2925 rpm Number of tool positions: 8 x 80 mm Adjustment, axial: 560 mm Laser alignment light for cut-off saw for detecting the section Studio window configuration Swiveling length stop +/- 60 with electronic digital display and pneumatic clamping Sliding counter rail Special pressure pad for angled part production Limitation: Wood thickness max. 120 mm At -60 position: Workpiece width max. 110 mm with 80 mm tenon length, or max. 150 mm with counter profili