Used Ima Ima Bima 410 for sale (6,070)

Condition: good (used), Year of construction: 2014, high-performance briquette press year of manufacture 2014 with only approximately 2,400 operating hours with an 11 kW motor Fodpfsztk Aysx Akyegh original price approximately €55,000

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand “Canon imagePRESS V800” colour production system Item for sale: 1 x Canon imagePRESS V800 with the following specifications: incl. POD Deck Lite-C1 paper deck incl. Fiery E500-06 Includes Duplex ADF / R-ADF Includes Booklet Finisher AG1 Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 764,250 pages Black: Approx. 252,565 pages Colour: Approx. 511,685 pages Condition: This is a second-hand machine, which may show signs of wear (minor scratches or yellowing). The device has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. Fgodpfx Akoz Ap Eljysh For further information, please feel free to contact us directly.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 27,875 h, machine/vehicle number: 150204, laser type: CO₂ laser, laser wavelength: 10 nm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser type: CO₂ laser Average power: 200–5,000 W Peak power: up to 6 kW Wavelength: 10.6 µm Beam quality factor M²: < 2.4 (typically 2.1–2.3) Beam divergence: 1.5 mrad (half-angle) Beam diameter at the output: 15 mm (1/e) Beam diameter at the output: 21 mm (full beam) Pulse repetition rate: 0–2 kHz Pulse width: 250 µs Pulse resolution: 70 µs (?) Alignment stability: ± 150 µrad (?) Wavelength: 635 nm Output power: < 1 mW MACHINE DETAILS Ambient temperature: 10–40 °C Relative humidity: < 95% (non-condensing) Connected power: 37 kW Fgedpfszncm Hsx Akysh Voltage: 400–460 V AC Voltage tolerance: ± 10 % Power connection: 3-phase Required cooling capacity: 45 kW Flow rate: 133 l/min Inlet temperature: 18–20 °C Maximum inlet pressure: 6 bar Nominal inlet pressure: 3 bar Differential pressure: 1.5 bar Cooling medium: Distilled water with 35 % Dowfrost HD Filter fineness: 100 µm Helium purity: 99.996 % Helium proportion: 67.7 % Helium consumption: 13.4–46.8 SLPH Carbon monoxide purity: 99.995 % Carbon monoxide proportion: 4.1 % Carbon monoxide consumption: 0.9–3.0 SLPH Nitrogen purity: 99.996 % Nitrogen proportion: 28.2 % Nitrogen consumption: 5.8–20.2 SLPH Total gas consumption: 20–70 SLPH Maximum proportion of water vapor, hydrocarbons, and oxygen: < 10 ppm Compressed air: dry Compressed air dew point: < 2 °C Operating hours (according to meter): 27,875 h

Condition: used, IL 2 control unit for ILSA Multimatic. Fodsy Uv Uajpfx Akyjgh

Condition: new, functionality: fully functional, input voltage: 400 V, Application of a spiral shaft with replaceable carbide knife inserts, which reduces noise levels by approximately 50% and extends sharpness more than 20 times compared to a conventional knife shaft. Fodpfx Aksytc Susysgh A key advantage of carbide inserts is the ability to replace or rotate individual knives in the event of damage, significantly reducing operating costs. Carbide-tipped blades enable chip-free planing and optimal smoothness on any type of wood. Perfectly even thickness planing ensured by the centrally guided column table with central support. Processing accuracy of 0.1 mm, adjustable via a digital indicator on the handwheel. High working comfort due to the noise-reducing guard. Precision-ground thicknessing table for workpieces up to 230 mm in height. Standard equipment includes table extension with integrated rollers. Chain drive ensures precise feed of the workpiece. Numerous safety features: no-voltage release switch, limit switches to prevent unintentional activation, emergency stop switch. Technical specification Thickness planing width: 410 mm Material height clearance (min.): 5 mm Material height clearance (max.): 230 mm Table size (width): 930 mm Table size (depth): 410 mm Maximum chip removal in thicknesser: 5 mm Minimum planing length: 150 mm Cutterblock diameter: 95 mm Number of knives/inserts on cutterblock: 72 pcs Cutterblock speed: 4050 rpm Feed speed: 6 m/min Extraction port diameter: 100 mm Motor power: 4.2 kW Motor power S1 100%: 3.0 kW Voltage: 400 V Dimensions (width): 1110 mm Dimensions (depth): 710 mm Dimensions (height): 1020 mm Weight approx.: 239 kg Scope of delivery Spiral cutter head with 72 TCT knives Spare TCT knives (5 pcs) Digital thickness table height indicator Table extension with rollers

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: HT-120T, total height: 1,990 mm, total width: 800 mm, total length: 1,600 mm, pressing force: 90 t, stroke length: 80 mm, overall weight: 1,500 kg, DGUV certified until: 09/2026, Digima HT-120T 900 kN punching machine Professional hydraulic machine for punching, notching, bending, and processing steel components. The HT-120T is a high-performance hydraulic punching machine designed for intensive use in manufacturing plants, blacksmith shops, structural engineering facilities, and workshops engaged in metalworking. The machine allows for punching holes in sheets, flat bars, tubes, and profiles, as well as notching tubes, bending steel components, processing corners, and preparing parts for further assembly or production. Tube Notching The machine enables notching tubes and preparing them for further joining or assembly. Punching Holes in Tubes The HT-120T allows for punching holes in tubular elements and steel profiles. Bending Flat Bars With the appropriate tool, the machine can operate as a press for bending flat elements. Bending Angle Bars The device supports the processing of angle bars and the preparation of structural components. Processing Radius Corners The machine enables shaping corners and producing repeatable elements with a specified radius. Punching in Plates The HT-120T allows for punching round, oblong, and other shapes in steel plates and sheets. Punching in Profiles The machine is suitable for punching in angle bars, profiles, and structural components. Rounding Corners Fgsdpfx Akez Arrujyoh The device allows for processing the corners of parts, improving their aesthetics and preparing them for assembly. Double-Sided Edge Rounding The HT-120T enables processing edges and rounding components on both sides, depending on the tooling used. Technical Specifications: Model: HT-120T Maximum punching thickness: 20mm Maximum punching diameter: 30mm Pressing force: 900kN Throat depth: 350mm Maximum stroke: 80mm Number of strokes: 8-20 strokes/min Motor power: 5.5kW Overall dimensions: 1600x800x1990mm Machine weight: 1500kg HS Code: 8462490000

Condition: new, Year of construction: 2025, machine/vehicle number: 6939, functionality: fully functional, Fimal Swivel Spindle Milling Machine TX 160 "Partnership Edition" Milling stop including parallel adjustment with handwheel and digital display, handwheel adjustment with digital display for the front stop jaw, electric travel swivel device for the complete stop, quick-release lever for fixing, aluminum stop jaws and pressure device, arc milling stop, electromotive spindle height adjustment, including digital display and decimal impulse setting, Table insert adjustable to the milling tool diameter (instead of table insert rings), Indicator lights for set milling speed, Electrical system and safety devices according to CE standard, Table dimensions: 2,500 x 780 mm, Fgodpfxjvlw Idj Akyjh Milling spindle d= 30 mm, H= 140 mm, Milling speeds: 3000/4500/6000/8000/10000 rpm, Max. tool size under the table: d= 320 mm, H= 50 mm, Motor 7.5 kW / 10 HP, 400 Volt, 50 Hz, including automatic star-delta switch, Sound pressure level according to EN 27960: 83.9 – 87.3 dB(A), Spindle inclination: -45° to +45°, Electromotive spindle swivel adjustment including electronic display and decimal impulse setting, Partnership Edition complete with: "L" version with double-sided table extension and extendable workpiece support with emergency stop button, Upper control panel including electronic display, Swiveling mounting plate for feed device, mounted on the vertical column of the upper control panel, Socket for feed device, Right-left operation according to CE standard, Preparation for the installation of AIGNER integral stop jaws Ex works, from Seevetal location, without pre-carriage, freight and instruction, as inspected, subject to prior sale

Condition: like new (used), Year of construction: 2023, operating hours: 4,837 h, functionality: fully functional, total length: 17,400 mm, total width: 1,970 mm, total height: 1,870 mm, cutting range round steel at 90°: 200 mm, type of input current: three-phase, overall weight: 2,300 kg, input voltage: 380 V, cutting range square steel at 90°: 200 mm, length stop: 8,000 mm, Equipment: documentation/manual, We are offering this like-new Jih-I Machinery JIH-NC24L circular saw for non-ferrous metals and aluminum, manufactured in 2023. Fgedpfx Aozzp Epekyjh Model: JIH-NC24L Serial number: N24L022C056 Date of manufacture: 20220826 Voltage: 380 V Frequency: 50 Hz Number of phases: 3 Power: 15 HP 8-meter infeed table 6-meter outfeed table If you have any questions or would like more information, please feel free to send us a message.

Condition: used, functionality: fully functional, Used SIMAC 100T hydraulic press. Fgodpfozh Epwox Akyjh

Condition: defective spare-parts repository (used), functionality: not functional, NIMAK BMP 20/200 spot welding machine for sale Arm length: 300 mm Fgsdpfxszp H Uke Akyjh Power: 200 kVA The machine is out of service, and its condition is unknown.

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: M08U/9110, Offer Number: M08U/9110 Machinetype: 2 die - 3 blow transfer header Make: NAKASHIMADA Type: NP80 Constr. year: 1992 diameter range: 10 mm number of dies: 2 number of stations (incl. cut off): 4 cutting length: 100 mm shaft length under head: 80 mm Fsdpfx Aszzw Sdokyegh output - pieces/min: 150 press power: 60 t Location: Outside of Europe

Condition: good (used), turning diameter over bed 280 mm Fjdpjyz Dg Rjfx Akyegh turning diameter over slide rest 170 mm turning length 600 mm weight of the machine ca. 400 kg spindle passage 26 mm speeds 55-2000 U/min total power requirement 1,4 kW dimensions of the machine ca. 1,5 x 0,8x 1,3 m Including EMCO SOD grinding support Including EMCO 4-jaw chuck Including machine feet Including change gears

Condition: good (used), Year of construction: 2007, power: 9.1 kW (12.37 HP), Manufacturer: Ilsa Multimatic Fjdjw I Ddhspfx Akyegh Type: Topline 320 Designation: Cleaning machine Distillation module: VD160 Tank volume: 320 L Spin speed: 550 rpm Power: 9.1 kW Year of manufacture: 2007

Condition: used, Wig welding machine, WIG welding system NIMAK Type GS 200 W WIG and DC electrode welding machine, also suitable for stick electrodes Manufacturer's No. 26642, year of manufacture approx. 1983 Output: 200 amps = 60% duty cycle 150 amps = 100% duty cycle Adjustable output range: continuously variable Mains connection: 380 volts, 50 Hz, 32 amps plug - 5 meter WIG hose assembly - HF ignition - Continuous current control and current increase - Connection for electrode welding - DC only - Water-cooled - Shielding gas pressure regulator Space requirement L x W x H: 900 x 590 x 1000 mm Fodpfx Aksdzqbvoyogh Weight: approx. 200 kg In good condition

Condition: like new (used), Year of construction: 2020, operating hours: 110 h, functionality: fully functional, working width: 850 mm, area performance: 4,100 m²/h, overall weight: 340 kg, input voltage: 24 V, tank capacity: 130 l, total height: 1,380 mm, total width: 810 mm, total length: 1,460 mm, water tank capacity: 110 l, battery voltage: 24 V, battery capacity: 180 Ah, rotational speed (min.): 170 rpm, empty load weight: 220 kg, For sale in new condition Hyper Xtreme 4100m2/h ride-on floor scrubber dryer Weidner BS1 08500BF / HYPER XTREME 4100 (Basic) For sale in new condition with 104 operating hours, 4100m2/h capacity ride-on floor scrubber dryer, with suction. year of manufacture:2020 Scrub width: 850 mm Suction head width: 900 mm Max working capacity: 4100 m²/h Detergent tank capacity: 110 liters Waste water tank: 130 / 155 liters Speed: 170 Brush pressure: 50 kg Vacuum motor: 480 watts Brush motor power: 2 x 400 W Pressure / vacuum motor: 1300 / 400 mm Traction type / Power: Front motor wheel / 600 W Fjdpozf Ix Aofx Akyegh Pressure / vacuum motor 1300 mmH2O / 400W Dimensions / weight: 146x81x138 cm / 220 kg Electrical system: 24 V Automatic battery charger 24v 4 x 6 V / 240AH working battery dimensions: 146x81x138 cm Weight without battery: 220kg

Condition: used, Year of construction: 2019, operating hours: 82 h, empty load weight: 175 kg, Weight: 175 kg Year of construction: 2019 Fsdozzf A Depfx Akyogh Operating hours: 82 Condition: Good condition Price: € 900,- ex VAT

Condition: used, mileage: 253,000 km, power: 265 kW (360.30 HP), first registration: 01/2003, fuel type: diesel, empty load weight: 12,030 kg, maximum load weight: 13,970 kg, overall weight: 26,000 kg, tire size: 315/80 R 22,5, axle configuration: 6x4, wheelbase: 3,200 mm, brakes: engine braking, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel-air, number of seats: 2, loading space length: 4,700 mm, loading space width: 2,420 mm, loading space height: 800 mm, Equipment: ABS, additional headlights, cabin, central locking, trailer coupling, Vehicle location: Bovenden, aluminum body, shared house, suspension seat, rear window, electric mirror, heated mirror, left electric window, right electric window, sun visor, 16-speed switch, ABS (anti-lock braking system), raised exhaust, work lights, leaf spring suspension, air-light-hydraulic tow bar, tie-down rails, yellow environmental sticker. Fsdpfjv Inmvex Akyogh Wheelbase: 3200 mm. Body: Aluminum 3-way tipper, swinging and folding aluminum side walls, spring-loaded, without rear crane! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors! - .

Year of construction: 2026, condition: new, functionality: fully functional, IG BAG DISCHARGING STATION Industrial system designed for the safe and efficient emptying of bags and Big Bags containing bulk materials and powders. Main Features: Heavy-duty steel frame construction Adjustable material vacuum system 4 pneumatic cylinders for complete bag emptying Safety access door for bag opening and handling Integrated collection hopper Suitable for powders, granules, and bulk materials Easy maintenance and cleaning Applications: Suitable for: Food industry Chemical industry Plastics industry Pharmaceutical industry Feed and pet food industry Powder and bulk material handling Approximate Dimensions: Structure footprint: approx. 1400 x 1400 mm Total height: approx. 3200 mm Custom solutions are available according to material type and production requirements. Contact us for further information, technical specifications, or a customized quotation. Fgjdpjy Ubu Ssfx Akyeh

Condition: excellent (used), SECO Minimaster holder MM 12-20 150.4 (28657) Slot milling cutter in case with 4 inserts MM 12-12008 RO8 P 40 Fjdsw Iczxspfx Akyegh

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, total length: 495 mm, total height: 520 mm, total width: 457 mm, construction height: 300 mm, construction width: 240 mm, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading are to be organized by the buyer! The system will be available from November 2026! TECHNICAL DETAILS Build volume X-axis: 330 mm Build volume Y-axis: 240 mm Build volume Z-axis: 300 mm Filament diameter: 2.85 mm Nozzle diameter: 0.25 mm, 0.4 mm, 0.8 mm Printing speed: < 24 mm³/s XYZ resolution: 6.9 / 6.9 / 2.5 µm Layer resolution with 0.25 mm nozzle: 60–150 µm Layer resolution with 0.4 mm nozzle: 20–200 µm Layer resolution with 0.8 mm nozzle: 20–600 µm MACHINE DETAILS Technology: Fused Filament Fabrication (FFF) Print head: Dual extrusion print head with automatic nozzle lift system and interchangeable print cores Supported materials: PLA, Tough PLA, Nylon, ABS, CPE, CPE+, PC, TPU 95A, PP, PVA, Breakaway Operating temperature: 15–32 °C Relative humidity during operation: 10–90 % RH, non-condensing Non-operating temperature: 0–32 °C Supplied software: UltiMaker Cura, Cura Connect Fodpezx S D Aofx Akysgh Supported operating systems: macOS, Windows, Linux Plugin integration: SolidWorks, Siemens NX Supported file types: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG Printable formats: G, GCODE, UFP Connectivity: WLAN, LAN, USB Display: 4.7 inch (11.9 cm) color touchscreen Monitoring: Live camera Operating noise: 50 dBA Build plate temperature: 20–140 °C Build plate leveling: Active leveling Nozzle temperature: 180–280 °C Nozzle preheating time: < 2 min Build plate preheating time: < 4 min from 20 °C to 60 °C Power consumption: 500 W Dimensions & Weight Machine dimensions: 495 × 457 × 520 mm Machine dimensions with Bowden tubes and spool holder: 495 × 585 × 780 mm Net weight: 20.6 kg Shipping weight: 29 kg Shipping carton dimensions: 650 × 600 × 700 mm FEATURES Dual extrusion print head Automatic nozzle lift system Interchangeable print cores Heated glass build plate Heated aluminum build plate PEI build plate Active build plate leveling Abrasion-resistant dual-gear feeder NFC scanner for material recognition Color touchscreen Live camera Spool holder with material guide Print Core AA 0.4 mm, 2 pieces Print Core BB 0.4 mm, 1 piece Nozzle cover, 3 pieces Power cable User manual CE marking

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 180 mm, spindle bore: 20 mm, turning diameter: 180 mm, turning diameter over bed slide: 180 mm, total length: 81 mm, total width: 31 mm, total height: 37 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, metric thread diameter (min.): 5 mm, metric thread diameter (max.): 25 mm, metric thread steps: 5, bed width: 350 mm, rotational speed (max.): 2,500 rpm, mount diameter: 10 mm, type of input current: DC, overall weight: 40 kg, quill mount: MK 3, cone diameter: 18 mm, spindle mount: MK 3, motor model: bezszczotkowy, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, type plate available, The Digima DC TYTAN 350 is a compact lathe designed for precise machining of metals and plastics. It is an excellent solution for small workshops, service centres, garages, technical schools, prototyping facilities and hobby applications. Its compact dimensions allow it to be installed in a limited workspace, while its robust construction provides stability and accuracy during operation. The machine is equipped with a powerful 850 W brushless motor and a direct-drive spindle. This solution ensures quiet operation, smooth performance and a long service life. The continuously variable spindle speed of 50 to 2,500 rpm allows the operator to adjust the machining parameters to the material, workpiece diameter and type of operation. The Digima DC TYTAN 350 can machine workpieces with a maximum swing over the bed of 180 mm and a distance between centres of 350 mm. The spindle bore measures 20 mm, while the supplied lathe chuck has a diameter of 100 mm. The machine can also cut metric threads from 0.5 to 2.5 mm and imperial threads from 12 to 52 TPI. Fgjdezlgtxepfx Akyjh The TYTAN 350 is suitable for producing bushes, shafts, pins, spacers, prototype components, replacement parts and small production batches. It allows users to manufacture and repair essential components directly in their own workshop, reducing outsourcing costs and waiting times. The standard equipment includes a 100 mm three-jaw lathe chuck, a drill chuck with an arbor, an MT2 live centre, a fixed centre, a set of five turning tools, operating and adjustment keys, and a rear splash guard protecting the workstation against chips and coolant. The machine is CE-certified and supplied with an operating manual. The Digima DC TYTAN 350 is a practical, user-friendly and versatile mini lathe which, despite its compact size, provides the performance required for real workshop applications. Its standard 230 V power supply means that no industrial electrical installation is required, making it a convenient solution for both professionals and demanding hobby users.

Condition: used, SIMAT SST 3006 – Panel shear – 3,000 x 6 mm – digital back gauge For sale is a used panel shear, SIMAT SST 3006, with a cutting length of 3,000 mm and a maximum sheet thickness of 6 mm. The machine features a digital back gauge. The adjustment of the travel distances is done electrically in the coarse range and manually via a crank in the fine range. Technical data: Manufacturer: SIMAT Type: SST 3006 Year of manufacture: 1993 Serial number: 3144 Machine type: Panel shear Cutting length: 3,000 mm Max. sheet thickness: 6 mm Voltage: 380 V Back gauge: digital Back gauge – Coarse adjustment: electric Back gauge – Fine adjustment: manual via crank Condition: The machine is used and is in a condition appropriate for its age. An on-site inspection and functional test are possible after prior arrangement. Fedpfxez Err Do Akyegh Location: Werdau, Saxony If you are interested, further information, pictures, or details about the machine can be provided. Inspection possible by appointment.

Condition: new, both working tables open at the same time! working width 410 mm cutter block DM 95 mm knife dimensions 410 x 30 x 3 max. chip removal 5 mm working table length 2200 mm thicknesses table dim. 410 x 775 mm feed speed 6/12 m/ min min. ÷ max. work piece height 3 ÷ 240 mm Fjdjdvn Hwepfx Akyogh Motorleistung 5,0 kW, 400V, 50 Hz incl. options: "Tersa”-cuter block Ø 95 mm, with 4 pcs knifes auxiliary fence for small work pieces electric height adjustment for thicknessing table with digital readout

Condition: excellent (used), Year of construction: 2018, operating hours: 13,613 h, functionality: fully functional, machine/vehicle number: V98BB208, number of print heads: 8, resolution (max.): 1,800 dpi, paper width (max.): 730 mm, paper height (max.): 153 mm, total length: 2,203 mm, total width: 1,572 mm, total height: 1,293 mm, space requirement length: 2,803 mm, space requirement width: 2,580 mm, space requirement height: 1,300 mm, year of last overhaul: 2025, type of input current: AC, input voltage: 230 V, Selling a well-maintained Mimaki UJF-7151 plusII UV-LED flatbed printer, manufactured in 2018, in very good condition. The machine is fully functional and can be inspected while in operation by arrangement, including a test print. Ideal for direct printing on promotional items, signage, packaging, acrylic, wood, metal, glass, leather, plastic, and much more. TECHNICAL DATA - Printing technology: UV-LED inkjet with piezo print heads - Resolution: 600 / 900 / 1,200 / 1,800 dpi - Max. printing area: 710 x 510 mm - Max. media size: 730 x 530 mm - Max. material height: 153 mm - Max. material weight: 30 kg - Available colors: C, M, Y, K, Light Cyan, Light Magenta, White, Clear Varnish, Primer - Interfaces: Ethernet, USB 2.0 - Dimensions (W x D x H): approx. 220 x 157 x 129 cm - Weight: approx. 330 kg including base - Printed area: 3105 m² - Operating hours: 13613 EQUIPMENT - Ink coverage: 92% - Accessories: Vacuum table ADVANTAGES - Exceptionally sharp prints up to 1,800 dpi Fodpfxsz Ek Nzs Akyegh - White and clear varnish for dark and transparent materials, as well as varnish and relief effects - Up to 153 mm height, allowing boxes, housings, and objects to be printed - Instant drying through UV curing - Robust Mimaki industrial quality PICKUP / SHIPPING Location: 47533, Kleve Pickup only. The machine weighs approximately 330 kg, so please arrange for suitable transport and lifting equipment or a pallet jack. If you have any questions, please contact me. Please refrain from sending unserious inquiries or trade offers.

Condition: new, Table dimensions 1.200 x 780 mm Motor output 7,5 kW Fjdpfx Akjxyafqoyegh Spindle diameter 30 mm