Used Guidetti Cable Granulation Plant for sale (7,367)

Condition: good (used), Year of construction: 2015, functionality: fully functional, Reverse Osmosis Plant for ethylene glycol recovery, with a 12 m³ raw-water storage and homogenisation tank, nominal feed flow rate of 4 m³/h at 4 bar and filter backwash flow rate of 11 m³/h at 1.5 bar. Includes an automatic downflow multimedia filter with anthracite and sand beds supported on gravel, designed to remove suspended particles and protect the membranes. Compact skid-mounted reverse osmosis unit with two-stage filtration using replaceable 20- and 5-micron cartridges, a variable-speed high-pressure pump and a two-stage (1+1) × 6 reverse osmosis membrane configuration. Equipped with 8-inch DOW spiral-wound aromatic polyamide membranes installed in GRP pressure vessels rated up to 1,000 psi. Nominal recovery rate: 90%, equivalent to a theoretical permeate production of approximately 3.6 m³/h under design conditions. Low- and high-pressure piping and interconnections manufactured from AISI 316L stainless steel. Includes recirculation, front and side permeate collection, a CIP chemical cleaning system, membrane flushing, a GRP solution-preparation tank, a 25-micron mesh microfilter and a delivery pump for cleaning solutions and permeate water. Automated control system based on a Siemens S7-200 PLC, providing measurement and control of flow rates, temperature, pressures, pressure drops, operating times, pumping, backwashing, flushing and process alarms. Operator panel with a 6-inch colour touchscreen for parameter display and configuration, start/stop control, filter washing, alarm monitoring and trend graphs. Includes a 2 m³ reverse osmosis reject-water tank for subsequent transfer to the evaporator. Serial No.: MPP51525. Pgodpezvddcefx Af Set

Condition: new, functionality: fully functional, power: 377 kW (512.58 HP), fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE New Generation FULLSTAR Series Mobile Crushing, Screening and Washing Plants are the most preferred machines in recent years thanks to easy and cost free installation. The first crushing process is performed with Primery Jaw Crusher, we can design with secondary impact crusher or cone crusher for second crushing stage according to the requirements of our customers. Fullstar-60 plant has been projected for the first time in the world by Fabo and provides crushing, screening and as well as to wash 0-5 mm sand at the same time on a single chassis. Our FULLSTAR model operates in closed Crushing circuit system and allows user to obtain 4 different final fractions up to 300 T / S capacity. We are manufacturing Fullstar-90 and 110 models which has 3 functions at the same time by trailed-type 2 chassis with its own tires. FABO FULLSTAR-90 is a mobile type plant which perform crushing, washing and screening operations at the same time. This type of plant is very efficient as it is produced on a single chassis, which reduces both plant operation area and manufacture cost. TECHNICAL SPECIFICATIONS: - Model: Fullstar-90 - Production Capacity: 120-180 Tons Per Hour - 1st Crusher: Primary Jaw Crusher – 900x650mm - 2nd Crusher: Secondary Impact Crusher – Rotor Ø1250x1000 mm - Maximum Feeding Size: 600 mm - Vibrating Screen Size and Deck: 1st Chassis: 1700x4500 mm : 2nd Chassis: 1550x4000 mm(Grizzly) ¬- Screw Washer Size: 600x5000 mm (Twins Helix) - Total Motor Power: 377 Kw - Generator (optional): 450 kvA - Plant Dimensions: 1st Chassis: 18960 x 4070 x 4650mm : 2nd Chassis: 15500 x 4650 x 4400mm Psdjzvfk Djpfx Af Ssgt FULLSTAR-90 IS A COMBINATION OF: • Bunker(Hopper) • Vibrating Grizzly Feeder(Bypass) • Primary Jaw Crusher • Secondary Impact Crusher • High Stroke Type Vibrating Screen • Screw Sand Washer (Single Helix) • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, Year of construction: 2010, “Cleaning in Place” (CIP) system, consisting of the following components: - 400-liter stainless steel tank serving as a hydrostatic circulation tank - 7.5-kW feed pump (Packo) for pumping 25 m³/h against 4.1 bar - 4.0 kW return pump (Packo) for pumping 25 m³/h against 2.0 bar - Shell-and-tube heat exchanger (Weinbrenner) for heating a flow rate of 25 m³/h from 55 °C to 75 °C with 790 kW - 4-channel chemical dosing system (ProMinent) for lye, acid, disinfectant, and additive - Temperature measurement - Conductivity measurement (E+H) - Inductive flow meter (E+H) - Control cabinet with touchscreen display - Various piping and valves Additional title: Cleaning system for cleaning pressurised tank cellars Volume circulation tank: 400 l Length: 2,5 m Width: 3,0 m Psdoztwu Aepfx Af Segt Height: 2,9 m Operation / Control: Simatic S7 Material: contact surfaces from stainless steel Position: on stainless steel frame with feet Features: Circulation tank; 2 centrifugal pumps; shell-and-tube heat exchanger; 4-channel chemical dosing system; control cabinet with touch panel; flow measurement; conductivity measurement; temperature measurement; various pipes and valves

Condition: new, functionality: fully functional, fuel type: hybrid, color: other, overall weight: 52,000 kg, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Pjdozd Nr Uepfx Af Sjgt Fabo tracked impact crusher FTI-130 is a complete mobile system which moves on hydraulicly driven tracked system with 1 km/h speed and combination of a vibrated grizzly feeder, an Impact crusher, foldable stockpile conveyors, control unit and electric generator. In today's conditions and technological processes, businesses are beginning to think about how to make their field of activity more efficient. As they make it more efficient, they always take into consideration factors such as the operationality of the machines they use, their low cost and staffing needs. Our Tracked Crushers can crush with high performance even on the most demanding mine sites with its specially designed body and compact structure. Customization can be done to our tracked systems by Jaw Crusher, Primary and Secondary Impact or Cone Crusher. Advantages of Tracked Crushers; -Heavy-duty walking tracks can reach places where ordinary machines can not reach. -It has the appropriate dimensions and sound level to crush construction waste in the city. -The fuel consumption of the generator and walking track units are very economical. -System maintenance and management is very easy with latest technology control software. TECHNICAL SPECIFICATIONS: Model: FTI-130 Production Capacity: 400-500 tons per hour Maximum Feeding: 500 mm Crusher Type: Impact Crusher SIZE: 1270x1200 mm CSS Setting: 0-50 mm Total Power: 500 kva Weight: 52000 kg - Low investment and operation cost – Zero substructure preparation – Easiness at usage and maintenance – Easy assembly and disassembly FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 6,000 h, machine/vehicle number: 66642, Coarse material screening plant Pedpfx Aoznl Hiof Sjgt 6 m³ feed hopper with steel plate belt feeder CAT C4.4 (3054) with 75 kW Double-deck screen box: 3,660 x 1,370 mm Feed capacity: up to 300 t/h Transport weight: approx. 23,000 kg including various spare screen decks

Condition: excellent (used), functionality: fully functional, ELMAG SER-FC-CS45 painting line for joinery 1. Automatic transport system with: – Trolleys: 40 units – Max. permissible total weight: 6000 kg – Trolley length: 3000 mm – Feeding system: automatic – Trolley rotation: automatic 2. Painting booth: Pgedpfx Ajzk Epcsf Sjt – Dimensions: 4080 x 2000 x 4000 – Power: 4 kW – Flow rate: 14,000 m3/h 3. Flow coating system: – Length: 4000 mm – Valve height: 4500 mm – Usable working height: 2500 mm – Pump flow rate: 500 l/min – Valve construction: stainless steel – Capacity of the paint valve: 200 l 4. Drying chamber: – Dimensions: 13,000 x 2900 x 4100 5. Air purification system (inlet + recirculation filters): – Air flow: 7000 m3/h – Painting line compressor – Air purification system (inlet and recirculation filters) Air flow: 15,000 m3/h – Thermal power: 110,000 kcal/h

Condition: refurbished (used), Year of construction: 2023, operating hours: 5,189 h, functionality: fully functional, power: 390 kW (530.25 HP), year of last overhaul: 2026, Equipment: Basic package Inventhor 9: - MTU diesel engine 6R1300, 390 kW at 1,700 rpm, complies with EUROMOT V emission standard - Auxiliary hydraulic connection 30 l/min and 70 l/min - Roller drive via planetary gear, 380 kW – VARIO – - Load-sensing system - Fuel tank 950 liters - Longitudinal conveyor belt: belt length 4,450 mm, belt width 1,000 mm - Centrally positioned lubrication strips - 24 V electrical control system - Additional electric pump for the operation of the following functions when the engine is off: “raise/lower/fold rear conveyor, open/close comb flap, open/close comb, optionally raise/lower permanent magnet belt, optionally raise/lower folding hopper” - Complete radio remote control - Large side GRP maintenance doors - Maintenance-friendly engine compartment with LED lighting - Hydraulically reversible fan - Loading protection on both sides - Fire extinguisher - Maintenance ladder - Toolbox - Acoustic start-up warning - Doppstadt telematics system - Paint: RAL2011 deep orange Additional equipment: - 500 mm flat chain undercarriage unit - Watering system with hopper extension H=300 mm on both sides - Size "L" shredding system – VARIOMAT (Variomat system L600/4 – 42 teeth) - Rear conveyor length 7 m, width 1200 mm - Size "L" "Limiter" (20 pieces) - LED light package for engine compartment and rear Pjdeyu Snuepfx Af Sogt - Central lubrication system with pump Delivery date to be arranged.

Condition: new, functionality: fully functional, Year of construction: 2025, The ASCO® VS COMPACT vibrating screen offers a robust and powerful platform for a wide range of screening tasks. Featuring two vibrating motors, it is particularly practical for recycling companies and businesses in the construction, agricultural, and gardening sectors, where many different materials must be processed within tight time frames. Technical specifications: - System capacity: 18-23 t/h - Maximum bucket width: 1.6 m - Screening area: 1.5 m² - Drive power: 230 V / 2 x 0.35 kW - Weight: 557 kg - Width: 1.88 m - Length: 1.31 m - Height: 2 m - Loading height: 1.63 m Options: - Poles - Hopper Pgjdpfx Ajwhkuusf Sjt - Support feet

Year of construction: 2025, condition: new, functionality: fully functional, The ASCO® VS BIG vibrating screen offers a robust and powerful platform for a wide range of screening tasks. Featuring two vibrating motors, it is particularly practical for recycling companies and businesses in the construction, agricultural, and gardening sectors, where many different materials must be processed within tight time frames. Technical Specifications: - System capacity: 40-150 t/h Pgjdpowhmlvsfx Af Sst - Maximum bucket width: 3 m - Screening area: 12.8 m² - Drive power: 400 V / 2 x 1.5 kW - Weight: 2457 kg - Width: 3.62 m - Length: 2.41 m - Height: 2.85 m - Loading height: 2.46 m Options: - Bars - Hopper - Support feet - Separator plate

Condition: like new (used), Refrigeration pack bought new in 2023 and never used. Cost almost £2 million, this was installed to run a spiral freezer and other machinery but due to the company going bankrupt, it was never commissioned. Extremely efficient to run compared to conventional systems. Pgjdjwcwbqjpfx Af Sot

Condition: used, Complete primary and secondary crushing plant, consisting of the following components: Primary crusher: LOKOMO K-140 single-toggle jaw crusher 1,400 x 1,200 mm, feed hopper, vibrating feeder and discharge chute. Secondary crusher: LOKOMO G4214 cone crusher, cone diameter: 1,350 mm, feed and discharge box, electrical and hydraulic installation. Screening plant: LOKOMO B 256T, screen area: 4,000 x 1,300 mm, with steel structure. Secondary crusher: LOKOMO S21-14 cone crusher, cone diameter: 2,100 mm, hydraulic installation; optionally with steel structure. Conveyor belts: LOKOMO 800mm x 10m, 1200mm x 6m, 1000mm x 31m, and 1400mm x 32m. Pgjdpfx Aswcyh Hsf Sjt

Condition: used, functionality: fully functional, Infeed: 1,000 x 350 mm, max. workpiece size: 320 x 320 mm, 45 kW electric motor 4-stage vibrating feeder HERWEG, approx. 800 x 4,000 mm, 2 x 4 kW drive Pgedjwb Dfgjpfx Af Sst with infeed and outfeed hoppers semi-mobile steel structure with platform, railings, and access stairs.

Condition: new, power: 132 kW (179.47 HP), fuel type: electric, color: black, Field of application: Mining Empty weight: 16.500 kg Dimensions (LxBxH): 250 x 300 x 400 cm Make of engine: Siemens Required tractor power: 132180200 hp Volume of the tank: 100 m^3 Pgsdpfx Afox D A Uco Sot Productivity: 50 tph = Additional options and accessories = - Central lubrication = Remarks = 1-Model : VSI 700 -CR Max Feed : 35 mm. Hard Condition Rotor Diameter : 760 mm. / Off Std. Rotor Rotor Speed : 50-70 m / s. Drive : 132 kW / 1500 rpm. Capacity : 40-60 tons / hour 0-5 sand production at 5-32 mm feed. Total Capacity : 80-120 tons / hour Weight : 8,500 kg Rotor Diamond Inserts (Two-row - 6 pcs Ductile Iron Tungsten Carbide Tipped) Other Wear Parts (2 Molybdenum, 22 Chrome Alloy Castings) Electric Motorized Hydraulic Unit (Used for Belt tensioning and Upper Body Lifting.) One-sided maintenance platform with ladder. Drive pulley for two separate speeds (1400 rpm - 1600 rpm) Vibration sensor switch Maintenance Crane 3- Model : VSI 800 -CR Max Feed : 50 mm. Rotor Diameter : 1000 mm. / Off Std. Rotor/Closed Rotor Rotor Speed : 50-70 m / s. Drive : 180 kW / 1500 rpm. Capacity : 70-100 tons / hour 0-5 sand production at 5-50 mm feed. Total Capacity : 100-150 tons / hour VSI-900-CR 1. Rotor Diamond Inserts (Two-row - 6 pcs Ductile Iron Tungsten Carbide Tipped) 2. Other Wear Parts (2 Molybdenum, 22 Chrome Alloy Castings) 3. Electric Motorized Hydraulic Unit (Used for Belt tensioning and Upper Body Lifting.) 4. One-sided maintenance platform with ladder. 5. Drive pulley for two separate speeds (1400 rpm - 1600 rpm) 6. Vibration sensor switch 7. Maintenance Crane 3-Model : VSI 900 -CR Max Feeding : 45 mm. Rotor Diameter : 900 mm. / CLOSE ROTOR Rotor Speed : 50-70 m / sec. Drive : 185 kW x 2/1500 rpm. Capacity : 70-80 tons / hour 0-5 sand production at 5-15 mm feed. Total Capacity : 230 tons / hour Weight : 14.500 kg Standard Equipments: 1.Electric motorized Hydraulic Unit (Used for Belt tensioning and Upper Body Lifting) 2. One-sided maintenance platform (galvanized grating and steps) 3. Drive pulley for two separate speeds (1400 rpm - 1600 rpm) 4. Automation control panel (Vibration sensor switch - Breaker feed control-working hours) 5. Maintenance Crane

Condition: new, functionality: fully functional, power: 340 kW (462.27 HP), fuel type: electric, color: other, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO MCK-90 is a middle model of MCK series, those are a mobile type & closed circuit crushing and screening plants that is used for processing of hard materials such as basalt, granite, gabbro, dolomite and other types of hard stones. MCK-90 includes two stages of crushing process which is made by primary jaw crusher and Secondary impact crusher. TECHNICAL SPECIFICATIONS: - Bunker: 20 m3 - Plant Dimensions (1st chassis): 11500x4600x4200 mm Pjdpfey Db T Tsx Af Segt - Second chassis: 15500x4650x4400 mm - Production Capacity: 100-180 Tons Per Hour - 1st Crusher: Jaw Crusher – 900x650 mm - 2nd Crusher: Secondary Impact Crusher – 1120x1250 mm - Maximum Feeding Size: 600 mm - Vibrating Screen Size and Deck: 1700x4500mm 3-4 decks - Total Motor Power: 340 Kw - Generator (optional): 450 kvA MCK-90 IS A COMBINATION OF: • Bunker(Hopper) • Vibrating Grizzly Feeder(bypass) • Primary Jaw Crusher • Secondary Impact Crusher • High Stroke Type Vibrating Screen • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: good (used), Cable rack for large cable reels Pgedpfx Afoy I U Tbs Set Consisting of 7 uprights Depth: 0.81 m Bays: 0.75 + 0.75 + 0.855 + 0.855 + 0.945 + 1.05 + 1.05 m width – upright width: 8 x 0.10 m Height: 5.06 m

Condition: new, machine/vehicle number: Baureihe GSE / Neumaschine, Economic granulators: This GSE series is ideal for all injection molding and blow molding operations. It is fundamentally suitable for all thin-walled plastic waste. These granulators stand out not only for their attractive purchase price, but also for their robust, split steel/welded housing, excellent cleaning accessibility, and easy knife and screen replacement. Thanks to the tangential housing geometry, combined with V-cut rotors (except GSE 300/300), even bulky and large-volume input parts are accepted and granulated by the rotor. Podpfeyr I Eqex Af Segt Material transport: As standard, the granulators are equipped with an extraction system and bagging station. Optionally, a collection bin for regrind is available, which, like the extraction trough, is made of stainless steel.

Condition: used, Year of construction: 2001, Konig Rex Futura bun roll line T6 S-MKB/1- SK58 Konig Rex Futura 6/5/4-row headmachine SK58 year of build 2001 Pedpfx Afjxvqv Ej Ssgt weight range 35-85 gram cap. 9000 pcs/h with Lippelt moulding and setting device year of build 2005 pictures BEFORE reconditioning

Condition: good (used), Year of construction: 1972, functionality: fully functional, This processing plant is designed for the production of creams, ointments, gels, pastes, lotions, suppository compounds, etc., with a usable volume of 100 liters. The total volume with the container closed is 123 liters; the minimum fill volume is 35 liters. Podpfx Aoyx Sxcef Segt The system consists of a fully enclosed stainless steel container with double jacket, which can be electrically or water heated/cooled. The container features a lid with integrated mixing units and drives. The mixing vessel is mounted on three castors and can be wheeled out for filling or cleaning purposes. The lid is mounted on a lifting column for hydraulic raising and lowering, enabling convenient cleaning and emptying. It is fitted with an observation window and two inlets with valves, which can also be used for adding other product components. Additionally, an adjustable mechanism is provided for setting the grinding gap of the colloid mill. Technical specifications: Container: Permissible operating pressure: 1 bar / -1 bar Homogenizer: 1,500/3,000 rpm – 1.8/2.5 kW Anchor agitator: 19/38 rpm – 1.8/2.3 kW Spiral agitator: 29/58 rpm

Condition: refurbished (used), Koenig Mini Rex 4000 Futura bun roll machine 2-pockets with formstation DR-RR 400. For the production of rounded, long-rolled, long-rolled and folded as well as flattened products new drum and pistons SKG54-AKG75 weight range 25-160 grams several weight ranges with other drums is possible through the use of combined stamp sizes, on request max. cap. 4000 pcs/h year R 2026 compact design fully automated dividing and rounding of wheat doughs and rye- -wheat doughs with a maximum rye percentage of 40% excellent results with the production of round, long-rolled, long-rolled and folded as well as flattened goods tried-and-tested in thousands of in-store bakeries height-adjustable calibrating head, folding net belts, lower belt and upper belt for ergonomic working with the following functions: transporting, long rolling, pressing flat teflonised collecting drawer for manual product removal high level of operating comfort quick and easy cleaning on account of plug-in elements stainless steel design power supply: 1.5 kW Pjdpfxjyidu He Af Segt weight approx. 460kg

Condition: used, power: 300 kW (407.89 HP), fuel type: hybrid, color: orange, emission class: euro5, Type of fuel: Hybrid (electric and petrol) Field of application: Mining Empty weight: 54.000 kg Dimensions (LxBxH): 1620 x 325 x 370 cm Pgodpfjykaftox Af Sot Make of engine: Perkins Emission class: EEV Productivity: 350 tph Capacity 200 - 350 t/h Opening Size 1,200 x 900 mm Rotor Size 1100x1300mm Weight 54,000 kg Transport (mm) 16,200 x 3,250 x 3,700 Operation (mm) 16,400 x 6,350 x 4,150

Condition: good (used), Power cable, data cable, -Manufacturer: Lapp Kabel, connection cable on cable reel 78 m -Cable reel: Schill IT Podpjivumpjfx Af Sogt -Cable: Rubber cable type H07 RN-F 3G1.5 -Cable cross-section: 1.5 mm² 3-pole -Connector plug: see photos -Dimensions: 410/260/H450 mm -Weight: 15 kg

Condition: good (used), Jordan MK1 High shear mixing plant Podpfow Dhhwex Af Sogt Stainless, 100L high shear mixing plant, mayo plant, variable speed high shear mixer, 4Kw, steam jacketed vessel, with Johnson lobe pump outfeed, variable speed pump, mobile, 3Ph

Condition: used, Year of construction: 2021, functionality: fully functional, total height: 2,320 mm, total width: 1,600 mm, total length: 1,600 mm, power: 15 kW (20.39 HP), SPYRA chip crusher / shredder - For reducing the size of chips containing tramp material Pjdpfx Afow N Rv To Segt - Warranty available upon request! - Fully operational and ready for immediate use - Tramp materials in the chips are no issue for this machine; it has been specifically engineered and patented for this application. Throughput capacity: 0.6 - 1.2 m³ / hour Actual throughput depends on chip type, characteristics, and the quantity of tramp material.

Condition: used, Debarking plant with drum debarker and disc chipper. Podpfx Afsw N Rxbe Ssgt Debarking drum type KMW Waplan in 3 sections with electrical motors for operate the debarker. Total length 45 meter Drum diameter 3.8 meter Each drum section 15 meter in length Water bearing system with pump system. Possibility to offer extra debarking sections if more are needed. Disc chipper for production of cellulose chips type KMW HH901-T12 Iggesunds "turnable chipping knife system" Capacity up to 1200 m3 of ready made chips per hour In-feed opening 760 mm Diameter chipping disc: 3400 mm Net weight: 27000 kg

Condition: good (used), Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist Podpfx Afsxbfk Ue Segt -Steel rope: on hand reel, for rope hoist multi-purpose hoist -Rope diameter: 12 mm -Length: 43 m -Transport dimensions: 430/300/H460 mm -Weight: 30 kg