Used Gluing System for sale (41,041)

Year of construction: 2016, condition: good (used), For inquiries: Zoltán Utasi +36 30 205 7380 • Edging thickness coiled edging: 0,4 - 3 mm • Edging thickness of cut-length edging: o max. 3 mm with unit FF701 o max. 8 mm without unit FF701 o max. 15 mm possible through tool change at trimming unit • Edge height: max. 65 mm • Workpiece thickness: 8 - 60 mm • Workpiece width: min. 65 mm • Workpiece length: min. 160 mm • Feed speed: variable 10 - 18 m/min LUMINA 1380 Ltronic Motor-driven pressure bridge adjustment Automatic lubrication of the transport chain Preparation RETURN-connection Electric for variable feed 400 V / 50 Hz, 2.2 kW Ksdpfx Aswkf Tweh Eedt Operation Edge Control 19 with 18,5" Touchscreen ECO MODE power-saving mode Pre-milling unit 1802 with 2 milling units Edge feeder MG701 SYNCHRO automatic transport of roll and strip products Ltronic LT702 NIR+ Laser Edging Unit Glue application system Glu Jet GJ302 automatic motorized, automatic adjustment of gluing height (tracing nozzle) (EVA, PUR) Glu Jet rinse hopper Change carriage GJ302 Change carriage LT702 Pressure section 1913 MOT: first roller driven, 2 support pressure rollers Sprayer unit after pressure unit with use of antistatic coolant End trimming unit1918 (60 mm) pneumatic Form trimming unit FR701: Play-free mechanism and 6 fully digital NC servo-axes ensure Form trimming unit FF701: Play-free mechanism and 4 fully digital NC servo-axes ensure 100% repetition accuracy at the touch of a button. Scraper unit 1929 MOT4 with motor-driven adjustment for sensing rollers Surface glue scraper FK701 With pre and post tracing device for scraping out superfluous glue on the complete panel length for a clean glue line. Sprayer unit1856 for the in- and outfeed area Buffing unit 1940 For edge cleaning and polishing

Condition: used, Year of construction: 2021, MEGA 300 TS Numerical Control Panel height 60 mm PVC/Abs mm 3 Feed speed up to 22 m/min Working height adjustable electronically by C.N. Motorized rubber belt with higher pressure Introduction system for small panels Panel support guide with electronic adjustment by C.N. Side roller conveyor with idle wheels for panel support Anti-adhesive group Rectifier unit with two motors electronically adjustable by C.N. Roll holder plate for delicate edges Edge magazine with 2 positions Gluing unit for EVA glue with glue tank and pre-melter Edge pressure group on straight profiles with pressure rollers electronically adjustable by C.N Kodpfx Ahot Hal Ds Eedt Non-stick group Trimming unit with 2 motors with automatic inclination adjustment Trimming unit with 2 superimposed motors Trimming / gleaning group with 2 tilting motors electronically adjustable by C.N. Rounding unit with 4 motors Edge scraper unit electronically adjustable by C.N. Glue scraper unit Oscillating brush group Hairdryer group

Year of construction: 2019, condition: used, functionality: fully functional, Approximately 250 pieces in stock. Price per piece: 100 Euros. Kdsdpfey Uc Sfsx Ah Ejt A mix of used and new items.

Condition: good (used), Year of construction: 2001, Quickwood Rustication / Brushing Line on 03 sides with 02 brushes per side Ksdpjvy Eu Isfx Ah Esdt

Condition: new, functionality: fully functional, total height: 938 mm, total length: 2,000 mm, total width: 1,100 mm, overall weight: 100 kg, Equipment: CE marking, documentation/manual, type plate available, ISI-FLOW DESK Standard – 1000S – 1700 m³/h Extraction table, suitable for gluing, sanding, polishing, welding, or manual cutting. The ISI Flow Desk 1000 S extraction table is a simple standard workbench for extracting non-explosive, dry dust and gases. TECHNICAL DESCRIPTION: Possible extraction capacity: 1700 m³/h Work surface W/D in mm: W 980 / D 960 Work height in mm: H 638-938 mm Table load: 150 kg/m (wood, with evenly distributed load) Work surface: Wooden slats (optional steel, stainless steel, or plastic slats) Overall dimensions W/D/H in mm: W 1076 / D 1000 / H 938 (other lengths and depths available as options) Fan capacity: without fan Ksdpfx Aszdtqush Ejdt Pipe connection: D=161 mm Color: RAL 7042/RAL 7011 Weight: 100 kg Application: The workbench is used for extracting non-explosive, dry dust and gases. It can be used as a gluing, sanding, polishing, welding, or manual cutting table. Your advantages of the ISI – Flow Desk series: - 8 device variants available - Simple connection to extraction system via nozzle at the end of the table - The design of the table allows working from 3 sides - Height adjustment - Wide range of assembly and connection accessories - Quality Made in Europe The ISI Air extraction table must not be used in conjunction with ATEX zones.

Condition: used, Year of construction: 2016, Power Touch control (touch screen system) with 21" full HD video Panel height 60 mm Pvc/Abs 3 mm Solid wood up to 12 mm Feed speed up to 20 m/min Working height electronically adjustable by N.C. Panel support guide with idle routines Side roller conveyor with idle wheels for panel support Anti-adhesive group Two-motor rectifier group Roll holder plate EVA glue gluing group with pre-melting unit and glue pot Edge pressure group on straight profiles with pressure rollers automatically adjustable by numerical control End trimming group with automatic inclination adjustment Two-motor chamfering group with adjustment 2-motor multifunction rounding group (chamfering + rounding) Edge scraping group with electronic adjustment by numerical control Glue scraping group Brush group Anti-adhesive group Kdodpewwtpysfx Ah Eot

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, arm reach: 3,900 mm, conveyor belt length: 8,000 mm, conveyor belt width: 600 mm, product height (max.): 2,600 mm, No reserve price – guaranteed sale to the highest bidder! The machine's original price in 2021 was EUR 1,480,000 (net)! TECHNICAL DETAILS Performance and Capacity Processing capacity: 60 pallets per day Boxes per pallet: up to 54 units Maximum box weight with 54 boxes: 15 kg Overall height from top of pallet: 2,500 mm Maximum total height (including pallet): 2,600 mm Maximum total load: up to 500 kg Process Times Stacking time per box: 12–15 s Wrapping time: approx. 30 s AGV cycle time (incl. pallet change, wrapping, labeling, transport): about 4 min Transport and Material Flow AGV travel distance: approx. 70 m Number of pallet change positions: 6 Available positions during pallet change: 5 Robot Industrial robot: 6-axis articulated arm robot Payload: 120 kg Reach: 3,900 mm Availability: 99.9 % Protection class (robot): IP64 Robot control: KUKA, protection class IP54 Robot pedestal: height 1,500 mm Safety and Control Technology PLC: Siemens S7-1500 with MP 277 Touch Panel, 19" industrial PC panel Central safety control: with decentralized I/O modulation Profinet slave card: for PLC communication Safety light curtains: 1× A 1,500 mm with muting (3 for robot cell, 1 for door, 1 for wooden pallet stacking) Conveyor Technology and Pallet Handling Kdjdpfxjxu Upms Ah Eet Powered pallet conveyor: length 4 m, width 1,200 mm Pallet transfer station: GoPal E24/W for docking station Pallet station power unit: GoPal 400 / E24/W Pallet detection kit: included AGV System Transport unit: autonomous AGV GoBot GoPal E24/W Server: GoControl Operating unit: GoPal operating unit (1× call button) Interfaces: GoPal AUX Interface Box (I/O) Integration: fully integrated into AGV system Conveying Technology and Singulation Box conveying line: 17 m long, 600 mm wide Horizontal robot transfer section: 1 m Belt conveyor for boxes (new line): 8 m long, 600 mm wide Singulation system: pneumatic pusher Singulation stopper: included Pallet Stacking Systems Automatic pallet stacking system for Euro pallets: capacity 13 pallets, manufacturer e.g. Palomat or similar Automatic pallet stacking system for wooden pallets: capacity 13 pallets, manufacturer e.g. Palomat or similar MACHINE DETAILS System footprint: 5.6 m² (base area) Connected load: 38 kW Weight: 3,500 kg Note: Further information on the equipment configuration can be found in the attached specification sheet.

Condition: used, Year of construction: 2015, Numeric Control Startouch Control System Panel height mm. 60 Edges in PVC/Abs rolls mm. 3 Solid wood in strips mm. 6 Feed speed up to 11 m/min Working height adjustable electronically by C.N. Panel support guide with adjustment Side roller conveyor with idle wheels for panel support Anti-adhesive group Ksdpfx Aetxtzkeh Ejdt Adjustable two-motor rectifier unit Reel holder plate Gluing group for EVA glue Edge pressure unit on straight profiles with adjustable pressure rollers Trimming unit with 2 motors with automatic inclination adjustment Gleaning unit electronically adjustable by C.N. Multifunction rounding unit (edner + rounder) adjustable by C.N. Edge scraper unit Glue scraper unit Oscillating brush group

Year of construction: 1993, condition: used, The REGA 6 indexer notches and prints directories onto pocket diaries, small books, or stapled/glued booklets. The machine is equipped with four processing stations and two magazines. The books are transferred from the input magazine to the processing stations and to the unloading magazine using an advancement system. Books to be notched must be manually stacked in the feed magazine. At the first processing station, a counting device and an opening finger open the book at the correct place. The index is notched in the second processing station, where each sheet is taken separately, placed on the blade, and notched. The third and fourth stations are intended for printing the directories. The use of two printing devices allows for two-color printing. Then, the book is closed and advanced to the unloading magazine to be stacked. The transport, opening, notching, printing, and stacking all occur automatically. The notched and printed books are manually unloaded from the stacking magazine. Equipped with: Infeed station Opening station Index cutting /notching station Printing station 1 Printing station 2 Delivery Various printing units/knifes etc, see pictures. Technical details: Book formats: Ksdpfjxdxnfex Ah Esdt Height: 70 - 170 mm Width: 70 - 115 mm Thickness: 1 - 15 mm Paper weight: Content: 30 - 120 g/m² Cover sheet: up to 180 g/m² Tabs Number: 1 - 40 (per book) Tab width: 15 mm Tab positions: Individually programmable, up to 40 positions Number of sheets per tab 1 - 35 sheets/tab Individually programmable for each tab Notching performance Number of notches per second: 2 - 7 tabs

Condition: used, Year of construction: 2017, HOLZ-HER Edgebanding Machine LUMINA 1380 Used machine Year of manufacture: 2017 Condition: Well-maintained Motorized pressure beam adjustment Edge thickness, roll material: 0.4 - 3 mm Edge thickness, strip material: Kdsdpfx Ahszpzy Uj Eot max. 3 mm with unit FF701 max. 8 mm without unit FF701 max. 15 mm with tool change on the multi-function milling unit Edge height: max. 65 mm Workpiece thickness: 8 - 60 mm Workpiece width: min. 60 mm Workpiece length: min. 160 mm Feed speed: continuously variable, 10 - 18 m/min Control system Edge Control 19 with 18.5" touchscreen color display 16:9 ECO MODE energy-saving mode Infeed fence, 1350 mm long Motorized adjustment of infeed fence Joint milling unit 1802, edge feed MG701 SYNCHRO Glue application station Glu Jet GJ302 automatic (refurbished in 2026) Including changeover trolley Including quick-change couplings Including HSK mounting for the unit Including automatic unit detection GLU JET collection container Pressing unit 1913 MOT Cutting unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12000 min-1) pneumatically pivoting 0/10° Milling unit FR701 6 fully digital NC servo axes. Profile milling unit FF701 4 fully digital NC servo axes. Scraper unit 1929 MOT4 incl. high-gloss kit Surface scraper FK701 Spraying system 1856 for the infeed and outfeed area Spraying system (release agent) after the pressing unit Automatic chain lubrication Adaptive pressure and glue quantity control Location: Bavaria Availability: approx. August 2026

Condition: used, Year of construction: 2000, machine/vehicle number: 2855, SECOND-HAND GLUE SPREADER OSAMA MOD. S2R 1300 - CE Kdodpfx Ahjr Iyf To Ejt - Chiller (Heat conditioner) HITEMA ECA 010/CHP 3 Cooling system for vinyl glue, urea glue and polyurethane glue for rollers gluing machines with two and four rollers. This device is required to maintain the glue temperature between the rollers always constant, and to ensure the scheduled pressure time even with high temperatures - Mixer CLT-A (Automatic feeder for bi-component glue) Automatic mixing and feeding system of two-components vinyl and urea glues with catalysers, sulphate and isocyanate, for rollers gluing machine. This device is required for production in continuous. Standard version includes a mixing head mounted on the gluing machine, fed by special pumps for glue and catalyser. The pumps take the products directly form the storage tanks and they are activated by the level sensors placed between the rollers, thereby ensuring a constant level of glue. - Automatic washer for rollers - Volt. 380/50 - S/N 2855 - Year 2000

Condition: good (used), Year of construction: 2011, Condition: used, in working condition The robust frame construction and press beams ensure precise frame assembly and gluing. The press guarantees accurate squareness while preventing frame distortion or warping. Thanks to the long stroke of the hydraulic cylinders, the lower beam and the clamping jaws require less frequent adjustment. The lower beam features automatic lifting and locking. Technical Specifications • Maximum frame size: 3000 × 2000 mm • Minimum frame size: 250 × 340 mm • Hydraulic pump power: 3 kW • Maximum total pressing force on the horizontal and vertical beams: 19 tonnes • Vertical hydraulic cylinder stroke: 1100 mm • Horizontal hydraulic cylinder stroke: 1200 mm • Lower beam adjustable to three heights: 380, 680 and 980 mm • Adjustable vertical and horizontal pressing pressure • Two horizontal fences with quick-adjustment system • Horizontal and vertical movements are controlled by lever-operated valves mounted on the machine frame • CE-compliant design • Pendant push-button control unit Ksdpfxezlyv To Ah Ejdt Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: used, Year of construction: 2011, Perfect binding line Müller Martini Acoro A6 (3026-20) Kjdpfezzki Nex Ah Eodt Year: 2011 Consisting of Gathering machine Müller Martini 1571 Year: 2011 - 2016 Description: - Hand feeding station - Number of gathering stations: 18 - ASIR Automatic Signature Image Recognition: ASIR III - ASAC automatic self adjusting calliper - Pump(s) - Set up element - Reject gate for incomplete products: 3715 - Transfer into the binder Perfect binder Müller Martini Acoro A6 (3026-20) Year: 2011 Description: - Semi automatic setting - Colour monitor with touch screen - Book Data Center: BDC - Number of clamps: 20 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: ICS-A C80 - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: MOD 40 Pot - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: CLS C18 - Gauzing station - Drum cover feeder - Scoring station: 4 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Müller Martini 3520 Year: 2011 - 2016 Description: - Transport system, length (approx): 40 mtr - Escape delivery Three knife trimmer Müller Martini Merit-S Year: 2004 Description: - Right hand infeed - Automatic hopper feeder for inline production - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 4-17 Book stacker Müller Martini UNO Year: 2011 Description: - Delivery to the right - Roller table delivery on the left Muller Martini Acoro A6: . Max. mechanical speed: 6.000 cycles/h Maximum size range: 430 x 320 x 60 mm Minimum size range: 140 x 100 x 2 mm Muller Martini Merit S: . Max. mechanical speed: up to 4.000 cycles/h Maximum size (uncutted): 384 x 320 mm Minimum size (uncutted): 140 x 103 mm Maximum size (cutted): 304 x 310 mm Minimum size (cutted): 136 x 100 mm Book thickness (min): 2 - 80 mm Muller Martini Uno: . Max. mechanical speed: up to 6.000 cycles/h Maximum size range: 500 x 320 x 80 mm Minimum size range: 140 x 100 x 2 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2014, For inquiries: Zoltán Utasi +36 30 205 7380 • motorized pressure bridge adjustment • Electrical system for stepless feed 400 V / 50 Hz, 2.2 kW • “Control PPC 221 – with 8.4'' VGA color display” High-performance control with very simple operation • Edging pre-milling unit 1802, 400 V (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 milling units for pre-milling the panel edge Kodex Huhcjpfx Ah Ejdt • Cutter, diamond Ø 70 x 64 x 30 mm, Z2, left-hand rotation For pre-milling unit 1801 / 1802 • Cutter, diamond Ø 70 x 64 x 30 mm, Z2, right-hand rotation For pre-milling unit 1801 / 1802 • Edge feeding unit 1903 SYNCHRO automatic transport of rolls and strip material • Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) • Pressure unit 1913 pneumatic first roller driven, 2 additional pressure rollers with pneumatic individual control • Cut-off unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12,000 rpm) pneumatically swivelable 0/10° • Multifunction milling unit 1827 pneumatic (2 x 0.65 kW, 200 Hz, 12,000 rpm) • Vertical tracing rollers manual manual adjustment of the vertical tracing roller by 0.1 mm for milling edge overhang, e.g. for plastic edges • Cutter, diamond Ø 56 / 60 mm, Z = 2, R = 2.0 mm, left-hand rotation Diamond-coated, solid tool with CM technology (LEUCO system) with integrated chip extraction, patented ProLock-E • Cutter, diamond Ø 56 / 60 mm, Z = 2, R = 2.0 mm, right-hand rotation Diamond-coated, solid tool with CM technology (LEUCO system) with integrated chip extraction, patented ProLock-E • Corner copying unit 1832 (1 x 0.35 kW, 200 Hz, 12,000 rpm), for edge thickness up to 3 mm • Cutter, diamond Ø 53 mm x 10 mm x 16 mm, Z = 3, R = 2 mm, with CM technology (LEUCO system) with integrated chip extraction, for profiling unit 1832 • Scraper unit 1929 pneumatic including pneumatic adjustment (separately for top and bottom) • HW reversible knives for scraper holder 1929 / 1927 R = 2.0 mm (2 pcs required) • Flat scraper unit 1964 Removing glue residue for a clean glue joint. • Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) For final cleaning and edge polishing. With 2 textile discs, swivel range 0–5°

Year of construction: 2024, condition: new, The OASI.S (Open Automation Systems Integrator Server) robotic material handling system for the automatic loading and unloading of IV bags and trays. This system is designed to transport filled IV bags from the cleanroom, load and position IV bags into trays using a pick-and-place robot, stack trays on a pallet, and move pallets of empty trays to and from cells. The system consists of connecting conveyors, a clean station with a delta robot, a robotic loading station (delta robot and 4-axis robot), and an unloading station (2 x 4-axis robots). The line includes: - 3 x FANUC M-410iC/315 robots, serial numbers: R24500486, R24500487, R24500488, manufactured in 2024 - FANUC M-3iA/6S delta robot, serial number R244001FB, manufactured in 2024 - FANUC M-2iA/3SL delta robot, serial number R2430075E, manufactured in 2024 Kedezx Aldepfx Ah Esdt The individual robot cells are equipped with dedicated grippers, four Buuusch MM 1104 B V03 TNXX pumps, conveyor feeders, additional electrical cabinets, and many other accessories.

Condition: good (used), D&K Europa PB System B2 Duo Laminator The machine is 100% operational and ready to use. In perfect condition, like new. Manufactured in 2021. Very low mileage. This advanced, high-performance machine is ideal for commercial laminating. Double-sided laminating uses two independent systems to laminate each side. Kodpfxezw Tyis Ah Esdt Technical specifications: Max sheet size: 540mm x 1050mm Min sheet size: 210mm x 220mm Min weight: 115 gsm Max weight: 600 gsm Operating temperature: 80-140°C Weight: 1100 kg 380V power supply Chrome-plated steel cylinder Pneumatic clamping, separation, and automatic high-stack feeding. Sheet feed accuracy: ±2.0mm. Touchscreen for easy operation. Sheet straightening module. Jogger on the sheet collection tray.

Condition: excellent (used), Complete production line for sale for manufacturing round metal rainwater drainage systems. Production starts from a sheet metal coil, then forms, stamps, and packages the products. All machines are in very good condition. The equipment is fully assembled and intended for mass production of: - Gutters - Gutter ends - Connectors - Corners - Brackets - Downpipe outlets - Elbows - Downpipes - Branch connectors (Tees) - Packaging If you are interested in the offered equipment, have any questions, or would like to receive more detailed information, please do not hesitate to contact us. We will gladly provide the full equipment list, technical specifications, additional photos, or arrange an inspection of the production line. Kjdpfx Asy I Tq Ssh Eedt All equipment is connected and can be inspected in operation to see the full production process.

Condition: used, Year of construction: 2016, Used Machine Year of Manufacture: 2016 Condition: Overhauled by a Holz-Her specialist Features and Technical Specifications: - Base machine with manual pressure bridge adjustment - Extendable workpiece support, distance: 600 mm - FG 201 jointing unit with 2 milling heads, including 70 x 48 x 30 mm Z 2 diameter cutters - Edge feeder 1903, single-feed, automatic transport of roll and strip stock - Glu Jet GJ 301 gluing system with automatic glue height adjustment (probing nozzle) - With magazine for glue cartridges - Pneumatic pressure unit 1912-3; first roll driven with pneumatic immersion control - Trimming unit 1918, pneumatically swiveling 0–10 degrees - Multifunction milling unit 1827 MOT 4 with pneumatic package, including dia. cutters - Profile milling unit 1832 for corner copying with radius cutters - Scraper unit 1929 MOT 2 - Chip collection box - Surface scraper FK 701 - Polishing unit 1940 - New main heater - Minimum workpiece length (mm) 160 - Workpiece thickness (mm) 6–60 - Edge thickness (mm) 0.4–6 - Feed speed (m/min) 10 - Overall length (mm) 4930 Kodpfozk N U Ajx Ah Eedt - Weight (kg) 1420 Availability: available immediately Location: 63934 Röllbach

Condition: used, machine/vehicle number: 007981, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Kdjdozz Ipmepfx Ah Ejt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Year of construction: 2025, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 54942, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be organized by the buyer! TECHNICAL DETAILS Nominal test force: 50 kN Test stroke: < 1,400 mm Usable distance between pressure plates: approx. 800 mm Test area width: 500 mm Test speed: continuously variable 0.001–1,200 mm/min Resolution of displacement measurement: ≤ 0.001 mm Diameter of pressure plates: 246 mm Centering bore: 40 mm Thread: M12 Hardness: ≥ 56 HRC Design: Steel, hardened, rotatable at the top and bottom, lockable at 0° Measuring range of the enveloping circle: 30–250 mm Design: Probe with bearing rollers Measurement: Recording under load MACHINE DETAILS Control system: Control system with control computer Test program: Enveloping circle measurement Network: Fast Ethernet, 100 Mbit/s between the control computer and the separately required operating PC Kdedpfx Ahjzx S Ego Est Software delivery: USB stick with installation software Documentation: Version and license status not documented separately Last calibration: 08/04/2025 Dimensions & Weight Machine dimensions: approx. 750 × 900 × 1,950 mm Base frame dimensions: approx. 730 × 900 × 700 mm Control cabinet with control computer dimensions: approx. 600 × 600 × 1,900 mm Machine weight: approx. 490 kg Base frame weight: approx. 50 kg Voltage supply: 3 × 400 V AC, 50 Hz, N + PE Type plate power: 3,000 W Connected power: approx. 3 kVA EQUIPMENT Base frame Control cabinet with control computer Rotatable pressure plates Enveloping circle measuring device with probes and bearing rollers USB stick with installation software Compressed air connection: Pneumatic connection with shut-off valve Note: The functionality has been tested and confirmed. However, an unresolved error message on the drive prevents further use. The machine is in like-new condition visually. The operating PC is not included in the offer.

Condition: used, Year of construction: 2014, machine/vehicle number: AH /117836, functionality: fully functional, year of last overhaul: 2025, Equipment: documentation/manual, Ideal machine for edge banding of solid wood panels MACHINING CAPABILITIES: - Panel height (thickness) to be machined: 8 to 60 mm - Router pass: max. 90mm², 0 to 3 mm Ksdezcpixjpfx Ah Ejdt - Minimum panel length to be machined: 140 mm with an edge thickness >3 mm 200 mm with an edge thickness between 3 and 12 mm - Panel width to be machined: up to 2000 mm - Edge thickness: 0.4 to 3 mm in coil form, up to 12 mm in strip form Panel overhang relative to the chain (part protrusion): min. 30 mm - Edge width: recommended overhang: panel thickness + 4 mm - Feed system (2 feed speeds) 18 m/min for thin edges 12 m/min for strip edges (solid wood) - Distance between parts (depending on feed speed): recommended min. 800 mm MACHINE COMPOSITION: - Unwinding table, useful diameter: Ø780 mm - Electric positioning infeed guide - Chain conveyor belt, work surface height from the ground: 96 cm - Front extension table with rollers (serves as a support up to 2 m) - RT-E sanding unit (edge trimmers or routers) 2 x 4 kW, 9000 rpm - VC gluing unit Infrared preheating of the edge Pre-feeder for EVA granules, indicative consumption 8.5 kg/h "Fastblock" glue pot, pneumatic pre-cutting shear Pressing with 4 rollers, including 1 motorized roller, pressure with electric adjustment - K-SEL end trimming unit Rotation speed: 12000 rpm, motor inclination from 0 to 15° - RFK top/bottom flush trimming unit Rotation speed: 12000 rpm - RI 800 chamfering/flush trimming unit with copy pad Rotation speed: 12000 rpm, spindle inclination from 0 to 25° - GLC compact sanding unit, 1400 rpm Belt: 75 x 2700 mm, inclination from 0 to 5°, adjustable pneumatic pressure - SPN polishing station with textile polishing brush - Motorized operator return, useful width 1 m, with 2 roller tracks, spacing 34 cm Air cushion track and belt conveyor. Arrival height from the ground: 79 cm OTHER CHARACTERISTICS: - General power supply: 400 V, three-phase + N + T, 50 Hz - Installed power: IN 52 A nominal - Pneumatic supply: 8 - 10 bars, dry air, working pressure: 6 bars - Extraction: 6 x Ø50 mm, 1 x Ø80 mm, minimum flow rate 3000 m3/h - CE marking, lockable disconnect switch, emergency stop buttons

Condition: used, machine/vehicle number: 007685, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: PUR Corner Rounding Unit: yes Kdsdpfx Ahsy Nkqfo Est Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 3200 mm Operating Units Right Side: 15 nr Operating Units Left Side: 15 nr

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Smart Touch Numerical Control with Sintra HD Software Kodpfswlbxlox Ah Ejdt Panel height mm 10 – 60 Solid mm 22 Pvc/Abs mm 3 Feed speed up to mt/min 25 Working height electronically adjustable by N.C. Motorized and electronically adjustable panel support guide by N.C. Anti-adhesive group Rectifying group with 2 motors electronically adjustable by N.C. Reel holder plate with n° 1 position Gluing group for EVA hot melt glue with glue pot End trimming group with 2 motors with dynamic suction system that follows the blades in each of its movements. Staggered trimming/cornering unit with 2 motors electronically adjustable by C.N Anti-stick unit Rounding unit with 2 multifunction motors (cornering unit + rounding unit) Electronic edge scraping unit electronically adjustable by C.N Glue scraping unit Brush unit “SP-501” Automatic piece return system with Winner 4A bridge unloading

Condition: excellent (used), functionality: fully functional, AUTOMATIC EDGE BANDER machine model STEFANI MONOBETA 4000 second hand machine with Instruction Booklets for the application of edges in PVC, veneer, melamine, ABS , thin solid wood strips for furniture, furnishings, kitchens, bathrooms, doors, panels and various XILIA positioner system technical data : tiltable gluing group: 0° / 7° min. height of gluing panel mm.10 Kdsdpfxowlzz Ts Ah Est max. height of gluing panel mm.60 min. thickness roll edge mm.0.4 max. thickness roll edge mm.3 max. thickness wood edge mm.25 min. panel width mm.60 min. panel length mm.110 adjustable feed speed: from 8 to 22 mt./min. electric press lift telescopic support for large panels soundproof cabin composition : 1. gluing group with glue tank 2. pressure rollers 3. edge feeder 4. end-cutting unit for front and rear vertical cutting of the excess edge - n.2 motors 0,44 Kw at 12000 rpm 5. trimming unit with overlapping motors for trimming the upper and lower part of the excess edge - n.2 motors of 0.55 Kw at 12000 rpm supplied, in addition, n.02 tilting trimming and cornering groups. n.2 motors Kw 1,15 at 12000 rpm 6. glue scraper group for cleaning glue residues supplied with 2 glue scraper groups, as spare parts 7. overlapping brush group for brushing and polishing the applied edges - n.2 motors at 1400 rpm , tiltable 8. dryer unit 0-600° - 1400 watt 9. contour trimming unit model STEFANI TRIM/60 . external unit HF high frequency converter volt. 380/50

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 7.376.230.761, functionality: fully functional, operating hours: 2,216 h, pressing force: 400 t, stroke length: 365 mm, throat depth: 630 mm, controller model: Durma DT-15, working width: 4,050 mm, TECHNICAL DETAILS Press force: 400 t Max. working width: 4,050 mm Frame spacing: 3,400 mm Overhang: 630 mm Max. stroke: 365 mm Crowning system: CNC-controlled Ram holder: Quick-release system Tool holder type: European style MACHINE DETAILS Drive system: CNC Control system: Durma DT-15 Number of axes: 4 (Y1 + Y2 + X + R) Dimensions & Weight Dimensions (L x W x H): 5,750 x 2,110 x 3,640 mm Weight: 27,760 kg Kedpfozzbafex Ah Ejdt Transport packages: 1 Operating hours: 2,216 h EQUIPMENT Tools Finger guard CE marking CE certificate Documentation Tools