Used Gearbox I: 53.8 for sale (55,065)

Condition: new, Manufacturer: Flender Type: B4 FH 10 A Nwedpfeg Stz Uox Af Sjl Power: 11 kW Ratio: 387,59:1 RPM in/out: 1.500 / 3,87 Bolt distance ø in: 300 mm Bolt distance ø out: 420 mm Weight: 1.140 kg

Condition: reconditioned (used), We offer the widest selection of Bizerba weighing and labeling machines. Nwodpfx Afehtfr Dj Sjl The machines have undergone a complete overhaul. We provide a warranty for the machines.

Condition: good (used), DC motor, servo motor, geared motor, electric motor, DC geared motor -Manufacturer of transmission: Atlanta, type 58 44 215 i 14.5 -Power: 2.45 kW / n1 1500 rpm -Motor manufacturer: Siemens, type 1 FT5072-OAFO1-2 / Brake 1 FU1050-6GF -Motor: 150 V / 10.0 Nm //3000 rpm -Hollow shaft: Ø 38 x 125 mm -Shaft: Ø 16 x 40 mm Nwsdogypu Iopfx Af Sol -Dimensions: 540/275/H230 mm -Weight: 29 kg

Condition: new, Year of construction: 2025, Equipment: CE marking, documentation/manual, - 2 pneumatic clamps - Cooling system - Material stop - Documentation - 400V Nsdpfogg N Tasx Af Sewl

Condition: as good as new (ex-display), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 - in stips / lippings mm max 1 Panels thickness (min/max) mm 8 / 60 (Laser - max 44) Numerical Control ICOS Open Feeding speed (adjustable) m/min 16 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Panels in-feed system 700.101 (mm 500 x 500) Pre-milling Unit (vertical joint trimmers) 08.379 (2 x Kw 4,0) adjustable by N.C. Glueing Unit (P.U.R. Glue + Quick Melt system) 04.0836 + 283.1518 (SERVO-MOTOR band feed) adjustable by CN Njdpfx Afegbug Ne Sewl Glueing Unit (Thermofusion with Laser) Laser System IMALUX Spraying Unit (for anti-release liquid) Band Pressure zone + Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) Linear 08.428 LKA V30/2(Kw 0,2 x 2) work speed up to 30 m/min (0°-25°) Fine Trimming unit (Multi-profile, by N.C.) 08.0587 (Kw 1.0 x 2) 4 profiles Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 20 (Kw 0,5 x 1) max 25 m/min Profile edge scraping unit DUO (4 profiles) Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-4 (Kw 0.18 x 4) Milling grooving unit 2 x 08.190 (Kw 4,5 x 2) swivelling 90°/180°/270° (adjustable by CN)

Condition: excellent (used), Drilling heads – special gearboxes for Nottmeyer, etc. various drilling heads Nwsdogrkmvopfx Af Sel

Condition: ready for operation (used), Franz Kessler DMQ .4.AF I main spindle motor, serial number as shown in the photo, used, with significant signs of wear, 100% functional, scope of delivery as shown in the photos. PLEASE NOTE: Please request the costs for packaging and shipping separately! Nwodoi D H S Rspfx Af Ssl

Condition: ready for operation (used), ABB Procontic CS 31 ICSE08A6 Analog I Remote Unit 24VDC, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos. Nedsi D Tr Ijpfx Af Sswl

Condition: ready for operation (used), AEG / Schneider Modicon AS-B872-100, 800 I/O, analog output 4-20mA, 4 channels, serial no. 20032987, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Nedpfx Afei D Tt Tj Sswl

Condition: refurbished (used), functionality: fully functional, Trimming head cpl. with diamond tools, fully reconditioned Nwsdpstp I D Iofx Af Sol - Version for HOMAG/LEUCO i-System - top and bottom aggregates available - version for manual adjustment NOTE: the version for automatic (NC-) with HOMAG part number 2-055-05-3361 and -3371adjustment is currently not available. - various radii available (used diamond tools) - Suitable for HOMAG corner rounding units FK11 or FK13 It is recommended to order the trimming heads as a pair (1 x top, 1 x bottom), in case it is for the purpose of running a new profile / new radius. The stated prices include full reconditioning, new bearings, seals, cleaned and aligned.

Condition: good (used), Year of construction: 1980, machine/vehicle number: 334, Offer 19194 Technical data: Njdporwl Nnefx Af Sswl - Drilling capacity 22 mm - Drill spindle holder MK 2 - Drill spindle stroke 100 mm - 4 drill spindle speeds 355 - 710 - 1400 - 2800 rpm - Right - left rotation - Projection 210 mm - Machine table 480 x 420 mm - Distance machined base plate / drill spindle 190 / 340 mm - Drive 400 V / 0.8 / 1.0 kW - Space requirement W 450 x H 1200 x D 700 mm - Weight approx. 170 kg

Condition: good (used), Year of construction: 1983, machine/vehicle number: 7346, Offer 24016 Technical data: - Drilling capacity 22 mm - Drill spindle holder MK 2 - Drill spindle stroke 100 mm - 4 drill spindle speeds 355 - 710 - 1400 - 2800 rpm - throat depth 210 mm - Machine table 480 x 420 mm - min. /max. distance drill spindle / table approx. 190 / 340 mm - Drive 400 V / 1.1 kW - Space requirement approx. W 450 x H 1200 x D 700 mm Nodpjrwmbgjfx Af Sjwl - Weight approx. 170 kg

Condition: ready for operation (used), The robot is used for dispensing pastes or liquids in a targeted or arbitrary manner. Nodpfxohx Nh Rs Af Sewl

Condition: used, centrifugal pump, water pump, stainless steel pump, food pump -Manufacturer: Hilge, stainless steel centrifugal pump -Type: Contra I/3 AD-V 25/25/1.5/2 Nwsdpfxoh Hbw No Af Ssl -Motor: Siemens 1.50 kW / 2860 rpm -Inlet/outlet pipe connection DN25 -Dimensions: 715/215/H265 mm -Weight: 37 kg

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 - in stips / lippings mm max 1 Panels thickness (min/max) mm 14 / 60 (LASER - Max 50) Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Panels in-feed (servo) system A1 / 15 Pre-milling Unit (vertical joint trimmers) 08.378 (2 x Kw 4,5) adjustable by N.C. Glueing Unit (P.U.R. Glue + Quick Melt unit) 283.201 + 283.203 Glueing Unit (Thermofusion with Laser) Laser System LASERLINE Spraying Unit (for anti-release liquid) Band Pressure zone + Edge coils supporting unit (No. 36 + 12 reels) Snipping (end-cutting) 08.42 (Kw 0,2 x 2) work speed up to 30 m/min (0°-25°) Nwedpfx Afsi Hn Sro Ssl Rough Trimming unit 08.0555 HS/LS1 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0587 (Kw 0,66 x 1) Multi-Profile Copying unit by N.C (fine + contour trimming) KFA 30 (Kw 0,5 x 1) max 30 m/min Profile Scraping unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0516 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.614 (Kw 0.25 x 4) No. 2 Milling grooving units 08.190 (Kw 4,5 x 2) swivelling 90°/180°/270° (adjustable by CN)

Condition: used, Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel gripper, panel gripper, lifting claw, lifting clamp -Manufacturer: ip, safety lifting claw 6 IP Nwjdpogtn Dfefx Af Ssl -Clamping range: 0 - 40 mm -Load capacity: 6 t -Dimensions: 250/110 / H550 mm -Weight: 26 kg

Year of construction: 2019, condition: new, machine/vehicle number: BI3, Annealing furnace for stress-free annealing and forming of acrylic glass The furnace has two doors on one side and two narrow doors with a rail system on the rear side. The sheets are hung in there and pneumatically clamped and released using a foot pedal. - The furnace has a maximum temperature of 230°C and a permanent deviation of approximately +/-3°C from the set temperature at 75°C. - The internal dimensions are approximately 1600 mm wide x 2000 mm deep. In terms of height, the furnace can accommodate a 1800 mm high sheet hanging freely within the rail system. - The rail system can be seen in the attached images. The rail system can also be mounted on the front side. It can accommodate sheet thicknesses from 1.5 to 25 mm and support a sheet weight of up to 150 kg. Nwsdpfeb Nzycex Af Ssl - The power can be adjusted in several stages. - Air circulation of approximately 3,000 m³/h - For safety reasons, the doors can also be opened from the inside. - Safety device that also shuts off the heating in the event of a fan failure.

Condition: new, Year of construction: 2024, Drying and Burn-in Furnace TRO, Model I Nwedpfed I T Exox Af Sjl For drying racks with max. 50rods, useable size 60x90cm, outer dimensions: approx. 2290mm wide x 1390mm deep x 2230mm high, useable space: approx. 1400x1070x1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539. Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and drying temperature: up to max. 180°C. Power connection: 400V/50Hz, 21kW, weight: approx. 650kg, varnishing: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). Special varnishing upon request. Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The solvents released during the drying process are dissipated from the exhaust side of the ventilator while supply air gets into the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easile adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks, flock glues as well as for burning-in of plate and aluminium signs up to 180°C. - Various drying racks for different applications available. - We recommend the installation of a gas warning unit. Delivery time 10-12 weeks. ATTENTION: Not permitted for solvents! Not permitted for foods!

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 450x320 saw band length 4250x34x1,1 mm band speed 40 + 80 m/min table height 845 mm saw band width 34 mm total power requirement 2,2 kW weight of the machine ca. 0,985 t dimensions of the machine ca. 1,4 x 2,0 x 2,2 m Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I · miter left + right 60° without machine conversion · 34 mm saw blade width Nwjdpofgyicsfx Af Sjl · Large material support turntable, ball bearings · To position the saw blade guides using a very wide linear guide · Strong, robust transmission · Large chipboards · Infeed and outfeed roller Removable chip tray (disinfection) · Free-standing control panel, safe and ergonomic · Storage space for tapes, consumables · Cutting pressure regulator Feed regulator · Fully hydraulic vise Preload super fast (front loading) · Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Optimum, material-independent cutting result through fine adjustment of the saw frame by means of: *Pressure Control Valve (Cutting Pressure Force) *Feed Control Valve (Speed) *Switch with pictogram, easy and clear to use

Condition: new, Product description: I-Beam Type Hanger Conveyors Conveyor Systems are one of the most important parts of the lines used in automatic coating plants. Our conveyor systems, which carries the parts to be painted in meters per day and kilometers per year, play an important role. Heavy parts to be coated are carried by webb conveyors which perform for long years with their long lasting bearings and steel cast chains. It has a wide carrying capacity range starting from 120 kg to 2 tons. • Operating principle of this type of conveyors is based on transferring suspended materials by chains and trolleys moving on a NPI profile by the help of a drive unit. • WEBB type conveyor chains are made of nodular cast iron or forged steel and subjected to heat treatment afterwards. • Special roller bearings used on trolleys are capable of operating at 200 °C. Greasers placed on trolley bodies provide lubrication for the system. • The drive system can be built based on either the caterpillar system or the gearwheel system, with safety switches and moving trolleys. • Conveyor speed can be easily adjusted by use of a frequency controller. • Chain tensioning system consists of skids and springs. Rollers and support wheels are used for band turns. Nwjdpfjdy Ewlox Af Ssl

Year of construction: 2017, condition: excellent (used), machine/vehicle number: SI8x4125, DEMAG KBK crane canopy crane runway with dimensions approx. 6x5m (5m bridge) This crane is available several times ! Payload / lifting capacity 125 KG - 0,125to Technical data of the system: Crane runway made of Demag KBK1 + KBK2L rails System is supplied complete: KBK rails, rail connectors, trolleys, end plates, brackets/hangers etc. Crane is with internal power supply incl. 125KG Demag DC chain hoist - lifting height approx. 3.5m Crane is disassembled and immediately available Used condition, see pictures Nwjdpsupwa Rjfx Af Ssl Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350x200 saw band length 3375x27x0,9 mm band speed 18 - 100 m/min table height 880 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,84 t dimensions of the machine ca. 1,85 x 1,9 x 2,0 m Demonstration system for a SPECIAL PRICE!! Fully automatic miter band saw • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start recognition) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Nwsdpfeupw R Asx Af Sel Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm. Inclusive: - Micro-spray device - Leveling elements

Year of construction: 2018, condition: good (used), coolant capacity 10 m3l/h Headroom 20 m operating pressure 2 bar voltage 230/400 V - 50 Hz motor speed 2900 U/min motor type 90 L engine output 2,2 kW weight 35 kg Standard suction centrifugal pump, Stainless steel housing and impeller, Flange connections, Serial No.: 22/04-140200 Nwodpfx Afjub Utds Sjl

Condition: good (used), Year of construction: 2006, Hurco machining center VMX 24 i IKZ chip worm spindle mount Sk 40 Nodpfjudb I Tex Af Sswl

Condition: good (used), DC motor, servo motor, gear motor, electric motor, DC gear motor, DC shunt gear motor -Manufacturer: Kählig, DC gear motor -Type: M63x22/I SN31 IGMi12/2 -Voltage: 24 V -Torque: 108 N/cm -Speed: 340 rpm Nwedpfxstr R A Eo Af Sjl -technical data: see photo type plate -Shaft: Ø 10 x 28 mm -Number: 4x engines available -Price: per piece -Dimensions: 170/100/H100 mm -Weight: 2.0 kg/piece