Used Gea Cfs Continuous Hot Air Oven for sale (35,894)

Condition: used, Year of construction: 2021, functionality: fully functional, Dürr Ecopure VAR 2206 Thermal Oxidizer with Flue Gas Cleaning (2021) For burning liquid and gaseous waste streams including fluorinated gases, e.g. PFAS, and recovery of aqueous hydrogen fluoride Emissions limits SO2 ≤ 100 mg/Nm³ NOX ≤ 30 mg/Nm³ CO ≤ 50 mg/Nm³ CF4 ≤ 70 mg/Nm³ HF ≤ 1 mg/Nm³ NH3 ≤ 2 mg/Nm³ Comprising Direct fired thermal oxidizer Hot gas cooling and acid recovery Alkaline wet scrubber Honeycomb selective catalytic reduction deNOx system >1M cost spare parts Direct fired thermal oxidizer Including 2x natural gas combustion chambers and burners - High calorific liquid waste requires safe ignition supplemental hydrogen supply for acid formation - Gaseous waste streams injected via nozzles downstream and close to the burner - 1.5MW multi-fuel natural gas & liquid waste (minor fuel stream) burner with natural gas capacity up to 200Nm3/h - 1400C normal, 1540C max allowable temperature destruction of pollutants to reduce emissions with 3.28 MW thermal energy transfer - 2 seconds minimum residence time in combustion chamber at 1400C - 1,800mm combustion chamber internal dia. - Approx 300mm refractory lining - 2,400mm combustion chamber external dia. - 12,000mm combustion chamber internal length - 3.28MW maximum thermal capacity - 4,900Nm3/h, 60mbar, 14kW combustion air fans One chamber is active, the other one is on standby and can be prepared, repaired, or maintained. This allows minimizing shutdown and changeover time to only several days Wet scrubber hot gas cooling and acid recovery SGL Carbon Diabon HT-PQ 850 graphite pipe quencher - 6,000 Nm3/h capacity flow - 1,100 mm dia. - 2,000mm high - pumps SGL Carbon Diabon THX-RS falling film absorber shell & tube heat exchanger - 1,100mm dia. - 4,500mm tube length - 595 no. tubes - 22mm tube internal dia. - Graphite, carbon steel - pumps Quench vessel - PP/FRP - 1,100mm dia. - Approx. 6,000mm high 2x Scrubber absorber columns, each - Shell FRP/PP - Internals PP - 1,000mm dia. - 11,000mm high - Pumps - Dosing station FRP 5m3 Emergency water tank - 1,600mm dia. - 3,000mm high - 3kW heating 2x Teblick 100,000L HDPE hydrofluoric acid tanks (2019) Honeycomb selective catalytic reduction deNOx system - 5,900Nm3/h, 130mbar, 42kW induced draft fan - 320 kW gas/gas heat exchanger - 500 kW capacity reheat burner - 1.2m deNOx honeycomb catalyst Clean gas outflow Stack with flow & temperature measurement Spare parts include - 200 items of sensors, pumps, valves, gaskets, joints etc. - Graphite quencher - Falling film absorber Ibsdez Ai Tpspfx Apcsb With the redesign and maintenance support of Dürr, the system could also - be adapted to other halogenated gases with bricks to be selected according to gas application - cope with the presence of VOCs or contaminated air - larger volumes with the addition of a small lance for 15kg/h liquid injection

Condition: used, all stainless steel belt width 400 mm mobile mesh width 5 mm adjustable speed with air knives with batter pump Iodpfxezxn Hae Apcjbb outside dimensions (l x w x h) : ± 1.900 x 900 x 1.900 mm with electric heating element: 3 kW - 230/400 V

Condition: new, Year of construction: 2026, Hot Air Lance HL-1 is a high-quality and efficient equipment. Hot Air Lance for pavement crack sealing preparation is a self-contained mobile unit for cleaning and drying of cracks, joints, potholes and chips in asphalted and concrete road surfaces, before pouring them with bitumen or bitumen polymeric materials. Powerful hot air flow removes moisture and particles of debris, grass, soil, dust, dirt, small stones, etc. leaving cracks dry, clean and ready to be filled with bitumen materials. Reasons to Buy Hot Air Lance from TICAB • Low price because of no mediators. • Always in stock. • 1-year warranty. • Full support from the manufacturer. Technical specifications: - Propane gas (consumption 5 kg / h); - Gas working pressure: 0.2-0.3 bar; - Gas bottle capacity - 50 l; - Compressor unit weight - 107 kg; - Output air temperature: not less than 400 ° C; - Hot Air Lance weight - 6 kg - Hot Air Lance length: 1500 mm; - Wheeled stand weight: 4kg; - Compressor capacity - 600 l / min; - Engine power: 7 hp. Ibsdpfx Ajvpqp Aepcjb

Condition: used, - Serial number: 10114243 - 2 levels, 5/10 trays, 400x600 mm - Year: 04-2007 - Model: Haube.SC - Programmable digital control panel - LED lighting - 8-speed ventilation Iedpfxeyabi Ss Apcjbb - Steam injection - Steam function - Voltage: 230V - Refurbished equipment: The equipment is reconditioned upon order; lead times for servicing and delivery are agreed upon at that time (please inquire for the post-refurbishment price) - Professional convection oven Wiesheu is widely used for baking all types of bakery products: bread rolls, croissants, cookies, etc. The Wiesheu Euromat is a classic convection oven featuring intelligent controls. The steam system ensures baked goods with a golden, crisp and highly appetizing crust. Furthermore, this oven can serve as an attractive centerpiece for any pastry shop, bakery, or retail counter thanks to its appealing design, while the visibility of the baking process helps increase sales of all products. - Optimal air distribution ensures uniform baking results in the hot air oven. HUMIDIFICATION: Rapid steam generation with the right amount of moisture for each type of pastry.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 31.064-R-11/2022, overall weight: 1,200 kg, heating capacity: 49 kW (66.62 HP), total height: 2,090 mm, total length: 2,270 mm, total width: 780 mm, Equipment: documentation/manual, Offering a used Optimal E Gr.II-S hot air furnace. Sale due to workshop restructuring. Heating capacity, special version: 49 kW. Cleaning side on the right – with automatic control. - Complies with 1st Federal Immission Control Ordinance (BlmSchV) – Stage 2!!! - Suitable for rooms according to DIN, up to 700-1250 cubic meters. - According to the Federal Immission Control Ordinance (BlmSchV), approved for particleboard or coated wood-based materials (only in woodworking or wood processing companies). Fine sawdust or dust of any kind is not suitable – risk of deflagration!!! - Furnace consumption: approx. 15 - 25 kg/h. - Tested in accordance with DIN EN 13240: 2005-10 (continuous operation), DIN EN 13229:2005-10, DIN EN 303-5:2012-10. Ibsdpfozy R Rdsx Apcjb Sale does not include the stainless steel chimney.

Condition: used, conveyor belt width: 1,000 mm, GEA CFS Koppens inline fryer, heated by thermal oil. 3m frying length, 1000mm wide belt. Auto canopy hoist, top hold down belt. Older machine, has been in storage for a long time, previously used for frying onion bhaajis and pakora. Iedjx Av Duopfx Apcjbb

Year of construction: 2014, condition: used, ROMACO PC 4250 PROMATIC CARTONING MACHINE Horizontal continuous motion cartoning machine, for the packaging of strips, sachets, and other similar products. Built in 2014. Iedpfx Aez Az Hqepcobb - Leaflet folder GUK RS21/760 (from reel) - Barcode reader Laetus Argus WT10 (with integrated camera CoCam 880 for leaflets and cartons) - Hot-melt gluing Nordson ProBlue unit, with automatic refilling (capacity: up to 270 cartons per minute) - Total weight: 3100 Kg PRODUCTION - Output: up to 270 cartons/min - Carton Size Range: 20 x 15 x 60 mm (min); 120 x 80 x 210 mm (max) ENERGY REQUIREMENTS - Power requirements: 400 V; 60 Hz; 9 Kw; 3+N+PE - Air pressure: 6 bar

Condition: used, Year of construction: 1999, Capacity: 350 hl/h Operating over pressure: 24 bar Desing temperature: 104 °C Length: 1,6 m Width: 0,85 m Ibedpfjzty Tuex Apcjb Height: 2,2 m Weight: 5000 kg Features: product pump H: 9,8 bar (Hygiana CN II, GEA, 350 hl/h), booster pump H: 4,7 bar (EURO Hygia CN II, GEA, 350 hl/h), hot water pump H: 1,3 bar (Maxa -DIN 80-2ßß 4/4, GEA, 700 hl/h)

Year of construction: 2019, condition: refurbished (used), functionality: fully functional, This is a CMP 61 combination steamer from the premium manufacturer Rational, in an electric version, manufactured in 2019 and equipped with a fully automatic self-cleaning system! The unit has been completely overhauled in our in-house workshop and is fully functional. The combination steamer shows signs of wear, see photos. The base frame shown in the picture is not included in the offer but can be purchased as an option. You will receive an invoice with VAT shown. Service: We will gladly assist you in finding a certified Rational customer service provider throughout Germany. Are you looking for a specific Rational appliance model? Ask us, we have access to a wide range of used and new equipment. We will be happy to advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Isdpoz Dg Svefx Apcjbb This unit is the optimal choice if you are looking for a classic combination steamer that you want to operate manually. Our used equipment service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, without installation and removal costs High-quality branded equipment at fair prices Professional overhaul/inspection & expert cleaning Tested & fully functional Flexible choice of shipping or self-collection Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 The Combi Master® from RATIONAL is robust and impresses with its functions, which enable the highest food quality. It supports the individual craftsmanship of the chef through precisely controlled cooking chamber climate, as well as precise adjustment of temperature, humidity, airflow and cooking time. Technical data: W x D x H: approx. 847 x 776 x 782 mm Minimum door opening dimensions for transport W x H: 845 x 850 mm Power connection: 400 V / kW: 11.0 / 50-60 Hz Capacity: 5x1/1 GN Weight: approx. 103 kg Serial number: E61MI19122799286 Year of manufacture: 2019 Condition: used, overhauled, fully functional Further information: Possible applications: Steam mode: from 30° C to 130° C Hot air mode: from 30° C to 300° C Combination mode: from 30° C to 300° C Finishing®: brings pre-prepared and chilled dishes to the ideal serving temperature in an optimal environment Automatic separation of grease for clean cooking chamber air Fully automatic cleaning program 5 air speeds: Whether delicate or robust, the CombiMaster® Plus has the right air speed for every food Ventilated double-pane glass (swiveling for easier cleaning) Core temperature measurement using a sensor Cool-down function High-performance fresh steam generator (automatic rinsing and draining) Handheld spray with automatic retraction Dynamic air circulation Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Do you have any questions, would you like to request advice or would you like to see something on site? You can reach us by phone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. Subject to changes and errors. The sale is exclusively subject to our general terms and conditions.

Condition: used, Consisting of: “GEA-CFS” battering machine Type ER 900 all stainless steel belt width 900 mm mobile mesh width 5 mm adjustable speed with air knives with batter pump outside dimensions (l x w x h) : ± 1.700 x 1.500 x 1.700 mm + “GEA-CFS” breading line Type PR 900 Ibsdpfjzza Aljx Apcob 2,83 kW suitable for standard belt width 900 mm mobile adjustable speed adjustable working height with air knive outside dimensions (l x w x h) : ± 2.800 x 1.200 x 2.100 mm

Year of construction: 2018, condition: used, functionality: fully functional, This combination oven from the manufacturer Rational is a CombiMaster® with 8 x 1/1 gastronorm trays in an electric version, allowing you to load the unit with deeper GN containers per tray. (It can also be converted to a 10-tray system). This combination oven was primarily used for reheating packaged food and is therefore in very good used condition. The combination oven is from the 2018 model year. The unit has undergone an inspection in our in-house workshop and is fully functional. The base cabinet shown in the picture is not included in the offer but can be purchased as an option. You will receive an invoice with VAT shown. Our used equipment service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded equipment at fair prices. Professional refurbishment/inspection & expert cleaning. Tested & fully functional - or your money back. Flexible shipping or self-collection options. Competent advice - before and after purchase. Provision of operating instructions, connection diagrams & spare parts. Inspection according to DGUV V3 seal. The CombiMaster® Plus from RATIONAL is robust and impresses with its functions, which enable the highest food quality. It supports the individual craftsmanship of the cook through precisely controlled cooking chamber climate, as well as precise adjustment of temperature, humidity, airflow and cooking time. Technical data: W x D x H: approx. 847 x 776 x 1042mm Minimum door opening dimensions for transport WxH: 845x1050mm Capacity: 8 x 1/1 GN Power connection: V: 400 / kW: 18.6 / Hz: 50-60 Weight: approx. 143kg Serial number: E11MI18072681444 Year of manufacture: 2018 Condition: used, inspected, fully functional Further information: Possible applications: Steam mode: from 30° C to 130° C Hot air mode: from 30° C to 300° C Combination mode: from 30° C to 300° C Finishing®: Bringing pre-prepared and chilled dishes to serving temperature at the optimal climate. Automatic separation of fat for clean cooking chamber air. Semi-automatic cleaning program (see photo sequence). 5 air speeds: Whether delicate or robust, the CombiMaster® Plus has the right air speed for every food item. Ventilated double-glazed door (swivels for easier cleaning). LED cooking chamber lighting. Core temperature measurement by means of a sensor. Cool-down function. High-performance fresh steam generator (automatic flushing and emptying). Hand spray with automatic retraction. Dynamic air circulation. Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Subject to changes and errors. Iodpozpvbgjfx Apcebb Do you have any questions, would you like to receive advice, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: used, Year of construction: 2015, functionality: fully functional, working width: 1,300 mm, total height: 1,780 mm, total length: 9,000 mm, total width: 1,783 mm, LOW USAGE!!! Technological line – equipment characteristics The technological line consists of a set of devices designed for transporting, cleaning, drying, and curing components, including furniture fronts and panels. The TB 2000 and TB 1500 belt conveyors are equipped with belts resistant to abrasion, friction, and solvents. The drive is powered by a geared motor controlled by a frequency inverter, providing a feed rate of 2.2 to 20 m/min. The devices have independent control panels with PLCs. The SMARTCLEAN 33-F brush machine is used to clean components before the painting process. It has a steel, reinforced body, adjustable height of the working units, and a system of brushes, blowers, and deionizing bars. The working width is 1300 mm, and the range of thickness of the processed components is 3–80 mm. The feed rate is 4–20 m/min, and the brush speed is 250–1100 rpm. The machine is equipped with a PLC, a touch panel, and safety systems. The UV-R SP M2 oven is designed for curing UV-cured products and for operation in a line with a working width of 1300 mm. It is equipped with two UV lamps, a cooling system, and an integrated conveyor with a length of 2000 mm. The total length of the oven is 12,000 mm, and the maximum component thickness is 80 mm. Control is via PLC and a touch LCD monitor, with the ability to save programs. The system enables precise adjustment of the radiation power and automatic control of the lamps and cooling. The TT 11000 chain conveyor has steel guides and chrome-plated beams. The length of the device is 11,000 mm, the operating speed is 2.1–20 m/min, and the drive power is 0.75 kW. Control is via a frequency inverter. The TR 1500 roller conveyor is equipped with driven PVC rollers with a diameter of 66 mm and a pitch of 125 mm. Its length is 1500 mm, and the feed rate is 2.2–20 m/min. The device has a PLC panel, a protective cover, and a photocell at the output. The ECOGEL 64/5 oven is designed for rapid drying of components using laminar flow of hot air. The flow is in the opposite direction to the direction of panel transport. The oven is equipped with a G4 filtration system, a heat exchanger with automatic temperature control, and supply and exhaust fans. The total length is 9000 mm, the working width is 1300 mm, and the maximum component thickness is 80 mm. The installed power is 3.7 kW, and the thermal power is 76,400 kcal/h. Control is via PLC and an LCD monitor. Iodpez Ahr Rsfx Apcjbb The AQUADRY LA/8 oven is designed for rapid drying of water-based stains and lacquers. It uses high-speed air knives to ensure efficient heat exchange. The process can be further accelerated using infrared lamps. Air recirculation helps to reduce energy consumption. The entire line has integrated control systems, safety features, and solutions that enable the automation of transport, cleaning, drying, and curing processes.

Condition: used, - Dimensions: 1970x2150x2730 mm - 2 trolleys: 800x600 mm - Baguette capacity: minimum 360 - Refractory stone (heat accumulator) - Integrated heat recovery unit - Baking surface: 19.2 m² - TOUCHMATIC touch screen control - Voltage: 400V - Power: 4 kW - Burner: Gas - ALL-IN-ONE = Rotary rack oven with integrated heat recovery unit - No additional trades required for installation - No electrical consumption by the heat recovery unit, as it is 100% mechanical - No need to connect to BMS (Building Management System)/central heating, no buffer tanks to store hot water - Automatic adjustment with no need for control, monitoring, or complex programming - Truly maintenance-free heat recovery unit - Heat recovery on each burner operating cycle - Long service life equal to that of the oven’s heat exchanger - Primary energy consumption reduced by 20% (oil/gas) - Improved baking results due to faster achievement of target baking temperature after loading - Further primary energy savings thanks to shorter baking times - No downtimes (no reheating periods) for continuous baking Ibedpfjxxanpox Apcsb - Heat remains where it is produced and needed: in the baking chamber, to bake your delicious products

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, first registration: 05/1988, total width: 2,500 mm, suspension: air, tire size: 385/65R22.5, wheelbase: 8,920 mm, color: white, Year of construction: 1988, = Additional options and accessories = - Air suspension = Notes = Vogelzang camper trailer – 8 beds – Bar – Shower/toilet – TV – Refrigerator Year of manufacture: 05-19-1988 Chassis/VIN: 050388 OH-50-28 APK/TUV: 05-26-2027 Camper trailer 8 beds Bar Seating area Toilet Shower Ibodpfxsz A S Duj Apceb Batteries Generator TV Refrigerator Hot water system €29,900,- including VAT = Further information = Axle configuration Tire size: 385/65R22.5 Suspension: Air suspension Rear axle 1: Max. axle load: 10,000 kg; Tire tread depth left: 70%; Tire tread depth right: 70% Rear axle 2: Max. axle load: 10,000 kg; Tire tread depth left: 70%; Tire tread depth right: 70% Weights Unladen weight: 7,730 kg Payload: 24,270 kg GVW: 32,000 kg Maintenance, history, and condition APK (technical inspection): valid until 05/2027 Technical condition: good Optical condition: good Identification License plate: OH-50-28

Condition: like new (used), Year of construction: 2026, functionality: fully functional, operating hours: 12 h, power: 30 kW (40.79 HP), input voltage: 380 V, temperature: 200 °C, inner dimension length: 1,200 mm, inner dimension width: 1,700 mm, inner dimension height: 2,300 mm, total length: 1,500 mm, total width: 2,200 mm, total height: 2,800 mm, overall weight: 400 kg, number of chambers: 1, control type: PLC-controlled, Equipment: CE marking, Professional Composite Curing Oven – Romer SL Internal Dimensions: 1200 × 1700 × 2300 mm High-performance industrial composite curing oven from the respected Polish manufacturer Romer, designed for advanced composite manufacturing processes including carbon fiber prepreg curing, drying, post-curing, and thermal processing applications. This electric batch oven is ideal for aerospace, automotive, marine, motorsport, and industrial composite production environments where accurate and stable temperature control is essential. Constructed with a heavy-duty steel frame, stainless steel internal chamber panels, and durable powder-coated external finish, the oven is built for continuous industrial operation and long-term reliability. The smart control system delivers precise temperature management, efficient power consumption, and controlled heating/cooling performance. The integrated air circulation and ventilation system ensures uniform heat distribution throughout the chamber for consistent curing quality. Key Features: • Maximum operating temperature: 200°C • Internal dimensions: 1300 × 1800 × 2000 mm • Designed for composite prepreg curing applications Ijdey Tvvzepfx Apcjbb • Heavy-duty industrial construction • Stainless steel internal chamber • High-efficiency hot air circulation system • Accurate programmable temperature control • Multi-stage curing program capability • Controlled heating and cooling cycles • Uniform temperature distribution • 8 internal vacuum inlets installed inside the chamber • Vacuum pump included in the sale • Suitable for carbon fiber, fiberglass, prepreg, tooling, and composite components Applications: • Carbon fiber prepreg curing • Composite part manufacturing • Aerospace and motorsport components • Marine composite production • Tooling and mold post-curing • Drying and thermal treatment processes • Research & development and prototype manufacturing The oven is in very good working condition and can be inspected and tested on-site.

Condition: good (used), Year of construction: 1992, machine/vehicle number: 1213255, REF: MM6183 1 x Double D Food Engineering double rack industrial oven, including baking racks and chimney. Features fan assist / air circulation (electric). Supplied with 15 x bakery racks. Located in Northern Ireland and ready to collect. Technical specification ⚙️ ✅ Manufacturer - Double D Food Engineering Ltd ✅ Burner model - n 2-4 ✅ Date of manufacture - 1992 ✅ Rating 500-000 General overview ℹ️ Designed for precision thermal processing, this oven delivers consistent and reliable results for a wide range of applications, including baking, roasting, drying, and cooking. This oven provides superior temperature control and uniform heat distribution, which is critical for product quality and safety. Key Features & Benefits 📋 ✅ Consistent Results: Ensures uniform cooking, baking, or drying for consistent product quality. ✅ High-Volume Capacity: Built to handle large production batches, significantly increasing efficiency and throughput. ✅ Precise Control: Offers accurate temperature and time control, allowing for fine-tuning of the cooking process. Iedpfxexb Alvo Apcebb ✅ Hygienic Design: Constructed with materials and features that facilitate easy cleaning and meet food safety standards. ✅ Versatile Applications: Suitable for a broad spectrum of food products, from baked goods and snacks to meats and ready meals.

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 20681, The Semmelroth S 50229/2 is a fully automatic, industrial continuous cleaning system in a timed linear design. It was specifically developed for the demanding cleaning of parts and surface preparation of aluminum and cast parts in industrial multi-shift operations. The system is completely made of stainless steel to ensure maximum corrosion resistance and durability when using aqueous cleaning media. System and Conveyor Technology - Transport system: Integrated, automated carrier circulation system. - Process coupling: Designed for timed linear systems for seamless integration into linked production and robotic cells. - Carriers: Customer-specific carrier design for precise and repeatable component placement during the process. Zone Layout and Process Steps The system goes through a five-stage process chain to meet the highest requirements for particulate and film-like surface cleanliness: - HD cleaning zone (high pressure): Mechanical pre-cleaning using high-pressure nozzles for targeted removal of chips, machining residues, and stubborn contaminants. - Cleaning zone (washing): Aqueous main cleaning (spraying/flooding) for chemical degreasing and removal of dirt from the surface. - Rinsing zone: Downstream rinsing stage for residue-free removal of cleaning agent components from the component surfaces. - Drying zone: Highly efficient blowing and drying unit for complete removal of residual moisture (prevents staining and corrosion). - Cooling zone: Targeted component cooling at the end of the process to thermally stabilize the parts for subsequent processes (e.g., metrology, testing, or packaging). Media preparation, filtration, and peripherals To ensure long bath life and consistent cleaning quality, the system is equipped with extensive peripheral technology: Ibedpfx Aszzpb Rspcjb - Filtration: Three separate filtration stages (each designed for up to 10 bar) for the cleaning, rinsing, and high-pressure zones. - Filter monitoring: Dual differential pressure measurement for automatic detection of the filter saturation level. Oil separation: 1x highly efficient oil separator (Type ÖT 60) for continuous removal of foreign oils from the washing bath. - Exhaust air management: 1x air-cooled condenser (Type RL 150) for condensation and extraction of process fumes (reduces humidity at the installation site). - Fluid management: Integrated wastewater piping for cleaning and rinsing tanks, including a robust 1" wastewater pump for emptying. Safety and System Monitoring - Process control: Two integrated viewing windows with splash-proof interior lighting for optical monitoring of the cleaning process during operation. - Environmental protection / emergency protection: Robust drip tray under the entire system, equipped with a leak detection probe for automatic shutdown in the event of media loss. Technical Performance Data - Manufacturer: Semmelroth Anlagentechnik - Model: S 50229/2 - Total connected load: approx. 110 kW - Material: Stainless steel (V2A / V4A)

Condition: new, Year of construction: 2026, Size: 3 Nominal heat output: 87 kW -- Complies with German Federal Immission Control Act (BImSchV) Stage 2 and CE standards -- Combustion chamber completely lined with fireclay bricks Suitable for rooms of: 2,200 m³ (according to DIN) Fuel: Logs, chipboard, wood chips, wood chip briquettes Fuel consumption: 25 - 30 kg/h Blower air flow rate, free-blowing: 6,000 m³/h Outlet opening: Ø 500 mm Flue connection: Ø 200 mm Weight: 1,250 kg Ibodpfxedlhbps Apcsb PLC control cabinet: 380 volts

Condition: used, - Used CRISTAL FM 2 Rotary Gas Oven 600x800 - Dimensions (WxDxH): 1950x2760x2480 mm - 2 oven racks: 600x800 mm - Serial No.: 0008319 - Year: 23-02-2002 - Baguette capacity (250g): 144 - Bread capacity (400g): 90 - Door opening (WxH): 800x1850 mm - Rack height: 1820 mm - Voltage: 380V Ibedsyhfixepfx Apcob - Electrical power: 4 kW - Heating power: 77 kW - Net weight: 1100 kg - Burner at the top - Sold with gas burner - Overhauled equipment: The equipment is serviced upon order; lead times for availability and return are agreed at that time (please request pricing after overhaul). Cristal Range: - Ovens in the Cristal range are rotary rack ovens designed for bakery and pastry applications. - The even circulation of hot air combined with the rotary motion of the rack ensures excellent baking quality and consistency for all production types: fresh, raw, frozen, and par-baked frozen. - Rapid heat-up makes this oven a flexible solution to optimize production according to sales cycles. Range Features: - The FM2 model accommodates 600x800 mm baking trays. - The heat exchanger in FM1 and FM2 ovens can be positioned at the rear, right, or left of the baking chamber. Performance, Responsiveness, and Versatility: - For gas and oil-fired versions, the heat exchanger is made of refractory stainless steel. Dksdsyhfixecu Ti Eneh - The design and materials of the exchanger ensure perfectly even baking across all levels of the rack. - Its specific section allows optimal heat exchange for outstanding performance and efficiency. - Air circulation inside the baking chamber is provided by three vertically aligned stainless-steel turbines, each 300 mm in diameter, located at the rear of the oven. - Air drawn in by the turbines is heated on contact with the exchanger and distributed evenly through the distribution slots in the baking chamber. - Operation of this oven is particularly straightforward, with no complex adjustments required (settings are factory pre-set).

Year of construction: 2020, condition: like new (used), As-new drying centrifuge For drying bulk parts For stain-free drying of workpieces after vibratory finishing Isdpjzzkw Tsfx Apcjbb Continuously variable speed control from 700 to 1100 rpm Adjustable hot air temperature Max. batch weight 5 kg Basket: Ø270 mm x 190 mm Timer: 1–60 minutes Heating power: 2.1 kW Voltage: 230 V Dimensions: 70 × 50 × 95 cm (L × W × H)

Condition: like new (used), Year of construction: 2020, As-new drying centrifuge Iedpfx Aozzkyhjpcebb For drying bulk parts For stain-free drying of workpieces after vibratory finishing Continuously variable speed control from 700 to 1100 rpm Adjustable hot air temperature Max. batch weight 5 kg Basket: Ø270 mm x 190 mm Timer: 1–60 minutes Heating power: 2.1 kW Voltage: 230 V Dimensions: 70 × 50 × 95 cm (L × W × H)

Condition: good (used), Year of construction: 2000, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, 20FT ISO CRYOGENIC TANK CONTAINER Manufacturer: Air Liquide Italia S.r.l. ISO Code 6346: 22KW IMO Portable Tank IMO Type 7 Transport Instructions: T75 ADR RID Tank Code: R11.7BN Iedpfxezd Saus Apcebb ISO Code 6346: 22KW Max. working pressure: 8 bar Hydr. test pressure: 11.7 bar Design Temperature: min -196 °C Material (Inner & Outer Vessel): High-grade Stainless Steel (X5CrNiN1810 UNI 7500) Insulation: Vacuum Double Envelope (Excellent current vacuum: 0.052 mbar) Safety Valves: 2x Herose Relief Valves (Set at 8 Bar) (p. 1) Vaporizers: Included & complete with piping Last Inspection: June 9, 2026 (5-Year Periodic Inspection by Bureau Veritas) Next Inspection Due: 12-2028 CSC Validity: Until 12-2028 (p. 1) Approval/Regulations: IMDG, ADR, RID, CSC, US DOT (p. 1) = Further Information = Year of Construction: July 2000 Model Year: 2000 Usable Material: Gas Unladen Weight: 8,300 kg Payload: 25,700 kg GVW: 34,000 kg Technical Condition: good Optical Condition: good Please contact Arne Honingh for further information.

Condition: excellent (used), Year of construction: 2004, Used CFS FRESHGRIND 200 grinder for sale. Isdpjzmwk Refx Apcjbb Equipped with a loading device. Please let me know if you are interested.

Condition: used, functionality: fully functional, Central ventilation unit HELIOS Air 1 XH1500 with highly efficient heat recovery and integrated air reheating. For controlled supply and exhaust ventilation of larger residential, commercial, or industrial areas. 2 EC fans at 0.5 kW each, 1,490 m³/h at 350 Pa. Electric preheating coil 3.9 kW, electronic reheating coil 3.8 kW, cross-flow heat exchanger, integrated filter box. Includes HELIOS Universal control unit ECO and 2 HELIOS duct sensors TFK – a functionally complete system. Technical data: - Air flow rate 1,490 m³/h at 350 Pa; fans 2 x 0.5 kW EC - Preheating coil 3.9 kW / Reheating coil 3.8 kW; cross-flow heat exchanger; integrated filter box - Control system: HELIOS Universal control unit ECO and 2 duct sensors TFK included - From a commercial environment, sold in its current condition without warranty. Ijdpfx Apezmaqajcjbb More units and equipment are continuously being offered for sale as part of a laboratory and pilot plant liquidation – inquiries are welcome. Sold on behalf of a customer via the Köck auction house. Located in eastern Austria, exact address available upon request. Collection/dismantling by the buyer.

Condition: good (used), Year of construction: 2013, MANUFACTURER GRASSAIR TYPE RLR150V7 AIR Serial No. API211340 Year 2013 Power (kW) 110 Capacity (m3/min) 10 Pressure (bar) 9.5 Operating hours (DOC/TOTAL) 43007 Frequency inverter yes Built-in dryer no Heat exchanger yes Cooled (air/water) air On tank no Isdpfxeykagqs Apcebb Documents no Connection 2 NEW/USED used