Used Gastro M Gastro M Griddle Plates Grill Plate for sale (74,483)

Condition: new, maximum load weight: 30,860 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Extract from the equipment list. Full equipment details available upon request. Chassis: * Steel welded construction with front neck, front corners chamfered and rear taper, drive-on ramp with central excavator bucket recess = depression at the rear between the longitudinal beams, approx. 2,300 mm long * Integrated in the outer frame: 4 pairs of approx. 4 t lashing brackets, 7 pairs of recessed retractable approx. 10 t lashing rings (2x on the raised platform, 1x in the front neck slope, 3x in the low bed between the wheel recesses, and 1x in the entry ramp) 2 pairs of wheel recesses: * 1 pair of wheel recesses, approx. 2,300/1,270 x 400 mm (L1/L2 x D), located in front after the neck with one-piece drive-over aluminium cover, for max. surface load approx. 11,650 daN/piece * 1 pair of wheel recesses, approx. 1,390/590 x 270 mm (L1/L2 x D), between the 3rd and 4th axle with one-piece drive-over aluminium cover, suitable for the transport of wheel loaders with wheelbase approx. 2,700 - 3,600 mm and wheel diameter approx. 1,485 - 1,740 mm, maximum rear wheel loader overhang 2,220 mm * Width between the wheel recesses approx. 1,255 mm (outer/outer longitudinal beams) Chassis attachments: * 5 pairs of stake pockets in the outer frame for box section posts approx. 100 x 50 x 5 mm (3x in the low bed and 2x on the raised platform) * Extensions with softwood planks approx. 50 mm, extendable on both sides of the low bed platform (the track width of the construction machines to be transported must not exceed the outer frame width of approx. 2,550 mm) * 4 pairs of foldable approx. 10 t lashing rings, distribution: 1 pair front on the raised platform, inside the longitudinal beams, 1 pair fully at the rear in the excavator bucket recess left and right, 1 pair front on the raised platform before the neck, inside the longitudinal beams, 1 pair rear in the low bed before the drive-on slope, in the excavator bucket recess left and right Ksdpfx Ajy Auhnsbfodn Drawgear: * Fixed drawbar with approx. 50 mm heavy-duty towing eye, cranked design, with silent bush mounting, drawbar retaining spring with tensioner * Truck coupling height approx. 775 mm to 975 mm * Drawbar length approx. 1,800 mm Support equipment: * 2 hydraulic rear supports - operated individually, controls installed in separate stainless steel box underneath Axles: * SAF air-suspended low loader axles with drum brakes, load capacity approx. 11 t/axle, S-cam brake approx. 300/200 mm, automatic slack adjusters Wheels: * 16 tyres 245/70 R 17.5, 146/146F, make Conti HTR2 (tyre load capacity approx. 12 t / axle) Brake system/Suspension: * Brake system per ECE directive R13, dual-line pneumatic brake system * Brake system make Wabco EBS system 4S3M, 1st + 3rd axles with sensors * RSS/RSP – stability program * Spring-actuated parking brake on 3rd + 4th axle * Aluminium air tanks for gross weight 44 t * Brake/air connection lines with 2 single coupling heads yellow/red * EBS/ABS connection cable * Tensioning rubber as holder for EBS and electrical plug * Air suspension with lift/lowering facility, operated separately front and rear * Automatic leveling to programmed driving height from 15 km/h Assistance/Safety systems: * SWIT - Schwarzmüller Intelligent Telematics Floor: * Softwood floor approx. 50 mm, impregnated, protruding approx. 5 - 10 mm above frame upper edge * Steel chequer plate cover over rear wheels

Condition: new, machine/vehicle number: 1acf251a278ec5cde4067a7b1, empty load weight: 5,800 kg, maximum load weight: 22,200 kg, overall weight: 28,000 kg, axle configuration: 2 axles, tire size: 235/75 r17,5, Further information Chassis saddle forwarding Fine-grained steel welded construction, saddle plate with replaceable 2 king pins Outer frame slightly slanted new design with Load-Lock profile for tensioning strap attachment 24 t. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation Free support foot corner dimension or free swing radius to the rear approx. 1920 mm 2 wheel chocks with holder Aluminum side impact guard Steel underride guard Quarter-shell mudguards in front of and behind each axle 1 spare wheel holder for 1 e-wheel, with wheel fastening set 1 plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery) Axles + suspension Drum brake axles of the manufacturer's choice Axle/chassis laser-measured Reduction of tire wear and fuel consumption Air suspension Brake system 2-line compressed air brake systemColor-coded line routing for easy servicing. Spring-applied parking brake Duomatic connection at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Kdodpfx Askv Uvzsbfjn Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Wheels and tires 235/75 R17.5 tires of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 1 x 15-pin socket at the front, without connecting cable Floor Screen printing plates approx. 30 mm thick, for high point load capacity for forklift axle load up to max. 5,600 kg Front wall / front corner stanchions 25 mm aluminum hollow profile, approx. 1 350 mm high, steel corner stanchions in volume design Approval country / plates Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Front wall aluminum Attention! These are archive pictures!

Condition: new, machine/vehicle number: e7fbe178b85a202cade7e95af, empty load weight: 5 kg, maximum load weight: 22 kg, overall weight: 29 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Chassis saddle forwarding Welded fine-grained steel construction, saddle plate with replaceable 2 king pins, with 2 king pin positions Slightly angled outer frame with load-lock profile for attaching lashing strapsNote! To attach the straps in conjunction with drop sides, the drop sides must be opened! 2 pairs of lashing eyes embedded in the outer frame on gooseneck, 5 tons each 8 pairs of lashing eyes embedded in the outer frame in the low bed, 5 tons each 24 to. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation 2 wheel chocks with holder Aluminum side bumper Steel underride guard Ksdpji Ri Hvofx Abfodn Quarter-shell mudguards in front of and behind axle unit 2 Stainless steel stowage box, w=600/h=400/t=500 mm, with polished door, lockable 2 pairs of stake pockets recessed in the outer frame on gooseneck, 70 x 40 mm internal dimensions 6 pairs of stanchion pockets in the outer frame recessed in the deep bed, 70 x 40 mm Internal dimension!!! Internal width between the stanchions 2420 mm!!! 3 lashing/stanchion rails in the drop-down bed, embedded transversely in the floor across the entire width up to the outer frame (max. usable internal width between the outer stanchions approx. 2170 mm), approx. 100 mm high. With 20 mm round steel slats, top and bottom, distance from top to bottom approx. 60 mm (of the round steel). For lashing and inserting stanchions 80 x 80 mm. Piece of stanchions W=80/ D=50/ L=1200 mm, hot-dip galvanized Piece of stanchions W=80/ D=80/ L=1200 mm, hot-dip galvanized Note: Stanchion pockets / stanchions are not designed for securing long material, pipes etc. on their own without wrapping around them. Mechanical rear extension with hand crank, can be extended by approx. 1,500 mm, can be locked every 500 mm, with support beam, can be loaded with 2000 kg over the entire width at the load center of gravity at approx. 500 mm, can be loaded with 1000 kg over the entire width at 1000 mm and can be loaded with 500 kg over the entire width at 1500 mm, incl. extendable underride guard with lighting, 2 pairs of stanchions W=80/ D=80/ L=1200 mm, hot-dip galvanized Open storage compartment for stanchions, on the front wall or underneath the loading area (for 10 stanchions 80 x 50 x 1200 mm and 4 stanchions 80 x 80 x 1200 mm) Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption last axle self-steering, with automatic reversing lock via reversing light, and additional locking function on the vehicle via hand button. Air suspension with lift & lower valve Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 non-interchangeable clutch heads at the front, without connecting cable EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Axle load detection via EBS-Canbus signal, for indication via display in the cab, truck must be prepared accordingly, no truck installation (no calibrated scales). Electrical system 24 volt, multi-chamber lights, amber LED lighting on the side 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin sockets at the front, without connecting cable 2 additional LED work lights, at the rear, switched via reversing light 1

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSWi 30.20 Dry splash wall Dimensions: 3000 x 2000 mm W X H Fan is built into the wall Air capacity: 10.800 m³ / h Motor: 2,20 kW ex-proof Exhaust air pipe: 500 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+180,- EUR net) Options/additional price for: transition angular to round: 150,- EUR net Ksdpfxjfr T Emj Abfedn Paintstop filter mat terminal strip: 180,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSWi 20.20 Dry splash wall Kdedpfjfr T Eqsx Abfsn Dimensions: 2000 x 2000 mm W X H Fan is built into the wall Air capacity: 7,200 m³ / h Motor: 1,50 kW ex-proof exhaust air pipe: 400 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+150,- EUR net) Options/additional price for: transition angular to round: 150,- EUR net Paintstop filter mat terminal strip: 150,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Year of construction: 2020, condition: refurbished (used), For suction diameters from 120 to 700 mm. Please let us know your volume flow and we will select the right cyclone for you. Different versions available: - Legs, made of painted square steel profiles - Rotary valve and transition piece with inspection flap - Inlet box with non-return valve - Tangential outlet with/without pressure relief surface - Square diffuser with/without pressure relief surface Kedpfx Aeftb Ebobfodn - Sound insulation Of course you can also obtain all accessories from us such as fans, exhaust pipes, deflector hoods etc. Functionality: The polluted air is tangentially fed into the cylindrical upper part is introduced, causing the air to rotate. The material is placed under the Influence of the centrifugal force in the direction of the cyclone circumference pressed out and led out through the hole in the bottom. The cleaned air leaves the cyclone through the centrally located Outlet pipe on top. The deposition efficiency increases with the feed rate, but also the pressure loss and thus the energy consumption. It is therefore it's important to find a good compromise. We have developed a range of cyclones optimised for filtering large quantities of material. They are therefore very well suited for the wood/paper/recycling/grain and feed industry At the bottom, the cyclone can be designed with the correct size based on the air volume and a typical pressure drop in the range of 1000 Pa can be selected. Operating pressure +/- 5

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSE 20.20 Dry splash wall Dimensions: 2000 x 2000 mm W X H Fan is installed above the wall + Fan in the height Air capacity: 7,200 m³ / h Motor: 0.75 kW explosion-proof (ATEX) Exhaust air pipe: 500 Ø mm depth: 900 mm The pipeline should not exceed a total length of 3-4 meters. Double filtration: paper filter + Paintstop filter mat over Terminal strip (+150,- EUR net) Options/additional price for: Paintstop filter mat terminal strip: 150,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. Kodpefv Hiqefx Abfedn We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Year of construction: 2020, condition: refurbished (used), Painting cube on rollers Ready to plug in 230 V Kdjdpfx Abefuhu Aofsn Motor power: 1,1 kW volume flow: 2.500 m³/h Dimensions: 1200 x 1200 mm W X H Hose connection rear bottom side: 250 mm Double filtration system paper filter and Paintstop filter mat Spray booth Paint mist Dry spray wall Spray wall Paint wall

Condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSWc 20.20 Dry bulkhead Dimensions: 2000 x 2000 mm W X H + Fan in the height Air capacity: 7,200 m³ / h Motor: 1,50 kW ex-proof exhaust air pipe: 400 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+150,- EUR net) Options/additional price for: Paintstop filter mat terminal strip: 150,- EUR net Kedpfxofn Ndcs Abfjdn side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. Kedpfx Abofn Nddsfjdn T.S.W.C. 30.20 Dry bulkhead Dimensions: 3000 x 2000 mm W X H + Fan in the height Air capacity: 10.800 m³ / h Motor: 2,20 kW ex-proof Exhaust air pipe: 500 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+180,- EUR net) Options/additional price for: Paintstop filter mat terminal strip: 180,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity: 9,150 kg, load capacity per storage section: 3,050 kg, total length: 22,800 mm, total height: 3,500 mm, load per truss pair (max.): 3,000 kg, number of shelf rows: 4, frame height: 3,500 mm, frame width: 1,100 mm, shelf height: 3,500 mm, shelf length: 22,800 mm, 4 double-bay pallet racks (M35112711-3) Each 5.7 m long, 3.5 m high, 1.1 m deep, Each with 2 bays, 2.7 m wide, Kdedpoyz Iccefx Abfen Each with 3 beam levels, shelf load capacity 3000 kg. - 12 frames (RM3511 - RAL5019) - 24 base plates, shim material, fastening material - 48 floor anchors (ZZBA1210) - 48 single beams (T2711 - RAL2008) - 4 load capacity signs (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - Max. 20 working days after receipt of payment - Delivered free to site/installation location - Unloading from the truck to be carried out by the buyer using their own lifting equipment - Deliveries available throughout the Federal Republic of Germany (except islands); deliveries to EU countries upon individual agreement.

Condition: ready for operation (used), swiveling table, size: 255 x 600 mm Manual table height adjustment approx.: 400 mm Kedpfx Aboyvthyjfodn Manual cross travel approx.: 150 mm Automatic longitudinal travel approx.: 260 mm Maximum spindle speed: 1200 rpm Drive motor: 380 V, 1.1/1.6 kW Required floor space: 1000 x 950 x 1520 mm Weight: 670 kg

Condition: like new (used), Year of construction: 2022, functionality: fully functional, feed length X-axis: 9,040 mm, feed length Z-axis: 200 mm, feed rate X-axis: 60 m/min, saw blade diameter: 700 mm, saw blade width: 5 mm, spindle speed (max.): 5,000 rpm, We are offering an HM-Z3 CNC crosscut saw and milling combination (year of manufacture: 2022). The machine is in excellent condition, has hardly been used, and can be considered virtually as new. Due to a change in our workflow, this machine has become redundant and is now available for sale. If you have any questions or require further information, feel free to send us a message or give us a call. Kodpfjyzpm Nsx Abfsdn

Condition: used, KEG system, manufacturer: M+F, type: Micromat M 2/2, with 1 internal cleaning station and 1 filling station, equipped with detergent tank Ksdpfoyzhviox Abfsdn

Condition: used, functionality: fully functional, load capacity: 8,000 kg, fork length: 2,300 mm, Fork Positioner ISO Class: ISO Class 4 = 5,000 - 10,000 kg Condition: Ready for operation and fully functional Technical condition: good Kjdpfjyzdd Nex Abfedn Description: ISO 4A (61 cm) Capacity 8,000 kg Sideshift Opening range 150-1850 mm Width 2,300 mm Forks 1,600 mm ID OS1928

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity: 13,500 kg, load capacity per storage section: 1,500 kg, total length: 34,000 mm, total height: 4,500 mm, load per truss pair (max.): 4,500 kg, number of shelf rows: 3, frame height: 4,500 mm, pallet spaces: 117 euro pallets, frame width: 1,100 mm, shelf height: 4,500 mm, shelf length: 34,000 mm, support length: 2,700 mm, HEAVY DUTY PALLET RACKS 3 rows of pallet racks Each 11.3 m long, 4.5 m high, 1.1 m deep, Kdjdpfx Absyy Uniefsn Each with 4 bays, 2.7 m wide, Shelf load: 4,500 kg! Bay load: 13,500 kg! - 15 frames (RH4511) RAL5019 - 30 base plates, shims, fastening materials - 60 floor anchors (ZZBA1210) - 54 single beams (T27155!) RAL2008 - 3 load capacity signs (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - Max. 26 working days after payment received - Delivery to construction site / installation site included - Unloading from truck to be carried out by purchaser with own lifting equipment. - Deliveries to all areas of the Federal Republic of Germany, except islands! Deliveries to EU countries are possible by individual arrangement.

Condition: good (used), Rotary unit, rotary device, turning table, conveyor belt, container rotary device, welding rotary device, welding device -Drive motor: 0.15/0.60 kW -Speed: 15/64 rpm -sealed: slewing ring -Device is: pneumatically tiltable Ksdpfoca Iatsx Abfsdn -Dimensions: 2520/800/H380 mm -Weight: 524 kg

Condition: good (used), functionality: fully functional, machine/vehicle number: WMA14DZZ3PP228113, mileage: 149,901 km, power: 162 kW (220.26 HP), first registration: 03/2024, fuel type: diesel, empty load weight: 5,950 kg, maximum load weight: 6,040 kg, overall weight: 11,900 kg, tire size: 265/70 R 17.5, tire condition: 80 %, axle configuration: 4x2, wheelbase: 5,200 mm, next inspection (TÜV): 05/2026, fuel: diesel, fuel tank capacity: 180 l, brakes: engine braking, color: silver, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, AdBlue, additional headlights, air conditioning, cable winch, central locking, cruise control, differential lock, electric window regulation, onboard computer, parking heater, soot filter, traction control, trailer coupling, our vehicle number #30805 L cab Euro VI 220 HP 4x2 Wheelbase 5,200 mm Engine brake Parabolic suspension (BL) Kdjdpfx Ajyyw Tujbfen Tire size 265/70 R 17.5 Tank capacity 180 liters Gross vehicle weight 11,990 kg Payload 6,040 kg Unladen weight 5,950 kg Differential lock TipMatic transmission Air conditioning PTO (Power Take-Off) Disc brakes Auxiliary heater Cruise control Traction control MAPOL fixed platform 5,000kg Electric winch Manual winch displacement Warning light bar 2x toolboxes LED headlights Hill-start assist ACC Adaptive Cruise Control Radio/DAB/Bluetooth On-board computer Multifunction leather steering wheel Sun visor Tow bar - ball head Driver's air-suspended seat/heated Passenger's air-suspended seat Roof hatch Central locking with remote Electric windows, dual Electrically adjustable/heated external mirrors Fog lights front Fog lights rear Cornering lights 1x sleeper berth Financing available on request!!!

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 253,000 mm, load per truss pair (max.): 2,000 kg, load capacity per storage section: 2,000 kg, number of shelf rows: 10, shelf height: 7,500 mm, frame height: 7,500 mm, shelf length: 25,300 mm, support length: 2,700 mm, 10 rows of pallet racks (10 x M75112711-4) each 25.3 m long, 7.5 m high, 1.1 m deep, each with 9 bays, 2.7 m wide, each with 4 beam levels, shelf load 2000 kg. - 100 frames (RM7511 - RAL5019) - 200 base plates, shims, and screws - 400 ground anchors (ZZBA1210) - 720 single crossbeams (T27114 - RAL2008) - 2 collision protection / impact protection (ZRS40901) - 4 flank protection (ZFL4090D) Kdjdpfsv Uqwdsx Abfon - 120 spacers / connectors for double rows (ZAbh20) - 10 load plates (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 34,000 mm, load per truss pair (max.): 3,000 kg, number of shelf rows: 4, frame height: 3,500 mm, pallet spaces: 108 euro pallets, frame width: 1,100 mm, shelf height: 3,500 mm, shelf length: 8,500 mm, support length: 2,700 mm, 4 rows of pallet racks (4 x M35112711-2) each 8.5 m long, 3.5 m high, 1.1 m deep, each with 3 bays, 2.7 m wide, each with 2 beam levels, shelf load 3000 kg. - 16 frames (RM3511 - RAL5019) Ksdpjv Ukz Aofx Abfjdn - 32 base plates, shims, screws - 64 floor anchors (ZZBA1210) - 48 individual beams (T27114 - RAL2008) - 4 load plates (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment. - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 14,200 mm, shelf height: 4,500 mm, support length: 2,700 mm, shelf length: 14,100 mm, load per truss pair (max.): 3,050 kg, frame width: 1,100 mm, number of shelf rows: 1, 1-row pallet rack (M45112711-3+) 14.1 m long, 4.5 m high, 1.1 m deep, 5 bays, each 2.7 m wide, Kedsv Unxlepfx Abfedn 3 beam levels each, shelf load 3050 kg, complete with support grid 1000 kg. - 6 frames (RM3511 - RAL5019) - 12 base plates, shims, and screws - 24 ground anchors (ZZBA1210) - 30 single crossbeams (T27114 - RAL2008) - 45 support grids (ZG8811010004) - 1 collision protection / impact protection (ZRS40901) - 1 load-bearing plate (BSMcP) Frame bolted, not pre-assembled Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity: 9,000 kg, total length: 17,000 mm, load per truss pair (max.): 3,000 kg, number of shelf rows: 2, frame height: 3,500 mm, frame width: 1,100 mm, shelf height: 3,500 mm, shelf length: 8,500 mm, support length: 2,700 mm, 2 rows of pallet racks (4 x M35112711-3) each 8.5 m long, 3.5 m high, 1.1 m deep, each with 3 bays, 2.7 m wide, each with 3 beam levels, shelf load 3000 kg. Kdsdpfxsv Ungce Abfon - 8 frames (RM3511 - RAL5019) - 16 base plates, shims, and screws - 32 ground anchors (ZZBA1210) - 36 individual crossbeams (T27114 - RAL2008) - 4 collision protection / impact protection (ZRS40901) - 2 load plates (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: excellent (used), Year of construction: 2009, Horizon Brochure Production Line Collating Machines Horizon VAC 100a, VAC 100m Number of Stations: 2x10 Max. Format: 500 x 350 mm Min. Format: 148 x 120 mm Loading Capacity: 55 mm per station Kjdpfjyhzubjx Abfodn Speed: up to 9,500 cycles/h Weight: 320 kg per tower Machine Dimensions: 810 x 652 x 1,961 mm Power Supply: 230 V, 10.6 A, 2.3 kW HORIZON ST-40 Stacking Table Specifications Max. Format: 350 x 500 mm Min. Format: 182 x 128 mm Paper Thickness: 52 – 208 g/m² Speed: up to 8,000 sets/h Stack Height: 360 mm Machine Dimensions: 1,353 x 652 x 1,027 mm (L x W x H) SPF 200A Stitch-Fold Station Infeed Format (4-page sheet): min. 180 x 105 mm, max. 508 x 356 mm Brochure Final Size: min. 85 x 105 mm, max. 250 x 356 mm Brochure Thickness: up to 25 sheets, 100 pages Speed: up to 4,800 cycles/h Weight: 782 kg (with FC-200A front trimmer) Machine Dimensions: 3,450 x 810 x 1,250 mm (L x W x H) Power Supply: 230 V, 5.3 A; 1.0 kW Trimmer: FC 200A Available from 05/2026.

Condition: excellent (used), Year of construction: 2015, WEINIG ISEL 3020 XYZ CNC TEMPLATE MAKER TOOL FOR PROFILE GRINDER TECHNICAL DATA: CNC ROUTER WITH 3 AXIS MOVEMENT CLAMPING T SLOT TABLE CADCAM TEMPLATE MAKING SOFTWARE INCLUDED Kdjdpoyxxnwofx Abfjn PC, SCREEN AND KEYBOARD INCLUDED FULLY ENCLOSED WORKING AREA WITH LOCKING DOOR SYSTEM LARGE CAPACITY WORKING AREA LOW VOLTAGE INTERNAL LIGHTING SET OF MOTOR COLLETS AND SPANNER SET TRAVEL AREA 300 x 200 MM Z AXIZ TRAVEL 90 MM SPINDLE SPEED 11000 & 25000 RPM DIMENSIONS 650 MM (L) x 610 MM (W) x 715 MM (H)

Condition: used, Year of construction: 2013, Overview This KeyKeg filling machine, MICROMAT M1/1‑F KeyKeg, was manufactured in 2013 by Germany m+f KEG Technik. The machine is designed for filling KeyKegs and was used in a brewery. The equipment is no longer required by the seller and can be visited at any time on request. Technical data  Formats: KeyKeg Application: KEG filling Operating pressure: 5.5 bar Electrical supply: 230/400 VAC Control voltage: 24 VDC Frequency: 50 Hz   Kdodpfx Abeyq Ia Ejfon