Used Flexlift 1000 Kg for sale (68,150)

Year of construction: 1999, condition: good (used), Demag KBK crane sky crane runway dimensions approx 20 x 6 m Payload / lifting load 1000 KG - 1,0to Lodpfjct Dhysx Afaohf Technical data of the plant: Crane runway from Demag CRC2 rails Mounting height variable, chain length about 4 m System comes complete: -KBK Rails, rail connectors -Fahrwerke, End plates, cable chain, holder / hanger etc incl. double bridge with Demag chain hoist 1to Conditioning is not like the pictures seen electrically driven - no travel drives! Picture shows the same facility with 12x6m Shipping preferred possible pickup by freight Demag KBK1 KBK2 and KBK3 rails are in stock! Shipping via forwarding Truck 450 euros net within about 350 Km please inquire Other measurements or shipping prices, we will be immediately and non-binding offer!

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed Lhsdpfxsx A U Nce Afaef • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: good (used), Year of construction: 1973, machine/vehicle number: 73040, Embossing press Baier GEBA 1/F, installation height 90 mm, pressure capacity 800 kg, working size 10cm x 14 cm, built in 1973, machine number 73040, in good condition, immediately available Lodpfx Ajvt Rpqjfaohf If you are interested, we would be happy to inform you about other machines in our company. You are welcome to view the machine in our company by prior appointment.

Condition: reconditioned (used), Year of construction: 2014, operating hours: 5,612 h, functionality: fully functional, pressing force: 48 t, filling opening width: 1,020 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 550 kg, total height: 2,800 mm, overall weight: 12,000 kg, transport height: 2,800 mm, oil tank capacity: 300 l, power: 30 kW (40.79 HP), volume flow: 332 m³/h, Technical information baler: Manufacturer HSM GmbH + Co. KG Lodpfxsvtpq Hj Afaohf Typ VK 4812 Year of construction 2014 Hours of operation 5,612 hours, stand August 2025 Press power main press 48 tons Specific press capacity 58,2 N/cm² Feed channel 1,250 x 1,020 mm Theoretic cycle time 11.2 sec. Theoretic throughput rate 332 m³/hour Bale size 1,100 x 750 x 600 up to 1,200 mm Driving motor 30 kW Connected load 32 kW Rated current 59 A Tying system 4-fold horizontal, fully automatic Throughput rate at a bulk weight of 20 kg/cbm up to 6 tons/hour bulk weight of 50 kg/cbm up to 13 tons/hour Bale weight up to 550 kg, depends on material SPS controller Siemens SIMATIC S7-200 Operating panel Siemens HMI Touch Panel Filling quantity hydraulic oil tank 300 L Oil type HVI 46 Machine installation dimensions with bale chute 10,046 x 4,387 x 2,705 mm (l x w x h) Transport dimensions baler 8,500 x 2,500 x 2,750 mm (l x w x h) Machine weight press approx. 12 t Scope of delivery: Baler HSM VK 4812, without hydraulic oil, without conveyor system. Two wire reel boxes for 8 pieces 40 kg wire reels, without wire Bale chute Machine documentation in German Comments: The press is equipped with an oil cooler and potential-free contacts for external control. The control cabinet is operated from the left in the direction of pressing, the needle unit is located on the right-hand side and can be folded back for transport. The press was partially overhauled and tested in our workshop, see photos and our function video. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available in German. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: new, weight max. 1,0 t stroke 4000 mm Use as a stationary chain hoist Chain hoist type GM 4 1000.5-2, 2 strands painted in color RAL 5017 traffic blue Load capacity 1 ton Hook path 4000 mm Place of operation indoor operation Calculation basis FEM 9.901 Engine group 2m / M5 Operating voltage 3~50Hz 400V Direct control type of control Degree of protection IP55 Lifting, 2-stage (pole-changing) 1.3 / 5 m/min Lifting power 0.22 / 0.9 kW Duty cycle 60% ED Circuits 360 c/h Standard equipment trolley electrics Solo trolley/hoist, ready-to-use, with power connector. Operation from the hallway using a pendant control The pendant control with 2-stage pushbuttons is attached to the chain hoist. Make: ABUS Length of control cable including pendant control: 3310 mm Control line calculation according to hook path overload protection Mechanical slip clutch as overload protection. The slip clutch is Lhsdpfeh Un Hasx Afasf preset.

Condition: used, mileage: 231,500 km, power: 163 kW (221.62 HP), first registration: 02/2007, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, next inspection (TÜV): 06/2026, color: white, gearing type: mechanical, emission class: euro4, total width: 2,550 mm, total height: 3,750 mm, loading space length: 7,550 mm, loading space width: 2,490 mm, loading space height: 2,580 mm, Equipment: soot filter, tail-lift, DAF LF45.22012t Furniture Van with tail lift ----Commercial vehicles Göppl GmbH DAF Authorized Dealer----Registration: 21.07.2007 Inspection (HU): 06/2026 Safety testing (SP): 10/2025 UVV: New upon handover Unladen weight: 5800kg Payload: 6,190kg Signs of use, rust and wear and tear visible and recognizable on the vehicle. See attached images Equipment: * Local transport cab DayCab * Mechanical cab suspension * Electrically adjustable mirrors * Halogen headlights * Tinted windows * Roof hatch with manual operation * Air-sprung driver's seat * Double passenger seat bench * Radio/cassette player with two speakers * Cruise control * Digital tachograph * Engine: 6-cylinder, 165kW/224 HP, EURO4c (emission code: 0681) * Manual 6-speed transmission * Rear axle ratio: 3.73 * Exhaust brake * Wheelbase: 5.40m * Tires: 245/70R17.5 * Spare wheel holder with spare wheel * Suspension: Front: 4.50t parabolic Lhedpfx Afop Spixoaof * Rear: 8.50t parabolic * Generator 80A, batteries 2x 175Ah * Fuel tank: 123 liters * AdBlue tank: 26 liters * Trailer hitch * Electrical connection 24V 2x 7-pin * Pneumatic connection for trailer * Permissible total towing weight: 21,000kg Body: * Manufacturer: Saxas * Type: MKD 76 - M * Furniture van with needle felt * Three lashing rails * Dautel DLB 1000 tail lift, 1000kg * Dimensions: * Length: approx. 7,550mm * Width: approx. 2,490mm * Height: approx. 2,580mm - pass-through height approx. 2,520mm Option: * OBU installation * Tachograph check * New seat covers * New floor mats * New service (X+Y) ----Commercial vehicles Göppl GmbH Weiden - Regensburg - Leupoldsgrün - Bamberg - Nuremberg DAF Authorized Dealer - DAF Service Partner - FIAT-Professional Service Partner Errors and prior sale reserved Sale only to businesses.

Condition: used, Year of construction: 2018, functionality: fully functional, volume flow: 10.2 m³/h, input voltage: 230 V, USED VACUUM PUMP Technical data Max. pumping speed 50 Hz (mbar) 8.9 m3/h Max. pumping speed 60 Hz (cfm) 6.0 cfm Ultimate vacuum 2 x 10-3 mbar / 1.5 x 10-3 torr Ultimate vacumm with gas ballast 1 x 10-2 mbar / 0.75 x 10-2 torr Ultimate partial vacuum without gas ballast 4 x 10-4 mbar / 3 x 10-4 torr Water vapor tolerance 40 mbar / 30 torr Number of stages 2 Permissible ambient temperature range (operation) 15 - 40 °C Permissible ambient temperature range (storage) -10 - 60 °C Max. outlet pressure (abs.) 1.1 bar Oil capacity min./max. 0.45 / 0.85 l Ljdpfx Afsw Rqx Doajhf Inlet connection small flange KF DN 25 Outlet connection small flange KF DN 25 Rated motor power 0.30 kW Rated speed 50/60 Hz 1500/1800 min-1 Protection class IEC 60529 IP 40 Dimensions (L x W x H) 503 mm x 156 mm x 240 mm Weight 24.8 kg Noise (sound pressure level) in dBA at 50 Hz or 1500 rpm/62% (VARIO)/1500 rpm (VARIO-SP)/12500 Upm (VACUU·PURE®) - 52 dBA NRTL certification - No

Condition: used, Year of construction: 1979, machine/vehicle number: Res BS, Demag PK2 Chain Hoist Crane Lifting Unit 250kg / 500kg Approx. 40 units available!!! 250kg / 0.25t rated load / lifting capacity – single fall – 500.- 500kg / 0.5t rated load / lifting capacity – double fall – 600.- With 2 lifting speeds, lifting height approx. 3-4m Complete with pendant control and load hook Total weight approx. 40kg, 380V 50Hz connection Top condition, fully functional. Not a worn or used device! Ljdsvzkylopfx Afashf Connect and start operating. Comes from ongoing operations Item location: 75053 Gondelsheim See pictures

Condition: used, Year of construction: 1989, Technical details: length: 12 200 mm width: 2 500 mm height: 2 600 mm weight of the machine ca.: Eigengewicht ca. 4,5 t 2 pieces containers, 40 feet, heated Extinguishing system container - insulated container (food refrigerated container) Extinguishing system container with 20.000Liter water tank/tank Mixing station, with corresponding electronics and piping as well as pump station (without pumps) Lhjdsu N Anhepfx Afasf i.D. *

Condition: used, Technical details: Lifting height: 90-800 mm lifting capacity in kg: 500 kg table length: 1415 mm table width: 860 mm total power requirement: 1,1 kW weight of the machine ca.: - t Ledpfx Aju Nk Amjfajhf dimensions L x W x H: 1,45x0,9x0,9 m transport dimensions LxWxH: 1,45x0,9x0,2 m control via panel up-and down and emergency stop hydraulic make HAWE connected via bayonet connection, volume flow 1,14 l/min with 400 bar pressure *

Condition: used, Year of construction: 2017, machine/vehicle number: 244489, Machine as new. Very little used, only for sample production. Machine is fully equipped: see dokuments Lhjdpfsx H Npuox Afaof Machine houers 22039.

Condition: good (used), Year of construction: 2002, functionality: fully functional, Year of manufacture: 2002 Ljdpfx Afox Uwr Teajhf Width: 1000 mm Length: 400 mm Height: 700 mm Number of axes: 5 Tool holder: SK50 Spindle speed (rpm): 15,000 Machineable materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK

Condition: new, empty load weight: 560 kg, maximum load weight: 440 kg, overall weight: 1,000 kg, loading space length: 2,000 mm, loading space width: 2,000 mm, loading space height: 2,300 mm, tire size: 155r13c, Highly visible sales trailer for snacks or goods. Our* snack trailers* are manufactured in an insulated sandwich construction. A very stable frame, welded and hot-dip galvanized, provides the basic stability. The flaps and doors have a welded frame so that the sales box is permanently stable. A proper personal lock in steel and *not in plastic* is installed in the door. The 30 mm sandwich case body has a galvanized sheet steel outer skin which is also powder-coated. The insulation is a PUR foam core. The *car trailer* is silver-grey on the outside and white on the inside. The *snack van* is supported by 4 crank supports. All together an inexpensive *car trailer* for *markets*, *snack bars*, *food*, *beverages*, *fast food*, *low food*, *non-food,* * *street food*, *sales goods* and much more. The standard equipment of the sales trailer at a glance: Lhsdpfx Afopfcpfeasf *entry door lockable with personal lock*, *step on drawbar*, *sales flap on the right* with lifting aids lockable from the inside, four stable *crank supports*, *sandwich body* 30mm outside in silver inside white, manoeuvring handles, jockey wheel, stable *welded frame* and a very stable V-drawbar hot-dip galvanized. Further technical details can be found below. As accessories for our *sales trolleys* we offer further *sales flaps*, *tarp triangles*, *electrical equipment*, *bag racks*, sales counters, cupboards, sinks, PVC on floor, *100km/h shock absorber* and *anti-theft device*.

Year of construction: 2016, condition: as good as new (ex-display), machine/vehicle number: KBK FFM, DEMAG KBK 2 - crane sky crane runway indoor crane Ljdpfemmbn Tox Afashf Pictures shows an example crane runway with the below components. These are also available individually! Please ask your crane runway about your dimensions Payload / lifting capacity from 80 125 250 500 to 1000 Kg KBK 2-R turnouts left and right (with conductor rail) KBK 2-R swivel discs 890mm (with conductor rail) KBK 2-R rails curved 15 30 45 60 90 degrees (with conductor rail) KBK 2-R rails (with conductor rail) The system can be delivered completely according to your wishes Rails, rail connectors, trolleys, end plates, drag cables, holders/hangers, accessories are available Chain hoists on request Very good, almost new condition Shipping by forwarding possible Demag KBK1 KBK2 and KBK3 rails are stock items!

Year of construction: 2026, condition: as good as new (ex-display), The BTS-Tyre Packing Machine Gen.2 is ideal for used tyre companies with large tyre volumes. The triple machine is the perfect solution for cost-effective disposal or resale of second-hand tyres. By doubling or tripling the tyres you achieve an enormous volume reduction, the available storage and loading capacity, as well as the permissible transport weight can be used much more efficiently. Pressing cylinder: Pneumatic Pressing force: 1.23 kN, adjustable Machine size: 1250 H x 1930 W x 660 D mm Machine weight: 93 kg Ljdpfjb Rz R Uex Afashf Transport size: 1250 H x 1200 W x 800 D mm Working height: 800 - 1020 mm, adjustable Power supply: Air, up to 10 bar / 145 Psi Working pressure: 6 - 8 bar User-friendly and safe two hand control Strong and long-life design High-performance pneumatic cylinder Ball bearing roller guides Adjustable working height Low noise level by silencer Air quick connector A quality product “Made in Germany” Suitable for doubling and tripling Second-hand tyres Optional extras Machine colour RAL BTS-MF550HD Scrap Tyre Baler Demo-Video shows BTS-Tyre Packing Machine Gen.1, the BTS-Tyre Packing Machine Gen.2 operates on same way. Tyre packing machine, Tyre triple machine, Tyre double machine, Tyre doubler, Tyre tripler, Tyre packer, Tire packing pachine, Tire tripling machine, Tyre doubling machine, Tire doubling machine

Condition: new, empty load weight: 320 kg, maximum load weight: 680 kg, overall weight: 1,000 kg, loading space length: 2,400 mm, loading space width: 1,260 mm, loading space height: 100 mm, tire size: 155r13c, Drop-down trailer from trailer manufacturer VEZEKO model HUSKY Vehicles can be easily loaded with a lowerable car trailer. The platform is raised using the hand hydraulics. The platform is lowered by opening the valve on the hand pump. This allows lawn mowers, machines, motorcycles, pallets, quads and ATVs to be driven up the slight incline. The standard equipment of the Senkomat includes a manual hydraulic system, drawbar box, lashing eyes, support wheel with bracket, sturdy welded hot-dip galvanized frame and a very stable V-drawbar. The exact equipment and technical details can be found below. We also offer the lowering lift trailer as a tarpaulin trailer or box trailer. Trailer accessories such as motorcycle rocker, motorcycle rail, tarpaulin & high frame, side wall attachment, lattice attachment, motorcycle lashing straps, belts, shock absorbers, TÜV for 100km/h and anti-theft device. Ledpfxeglxife Afajhf ----- You can also find all our low-cost offers on our homepage Germany-wide delivery (except islands) possible! for the prices. ----- PKW-Anhänger-Center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Tel: 0 Fax: Pick-up times: Monday - Friday - o'clock Saturday is not possible!

Condition: new, Year of construction: 2025, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 600-700 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Lhedpfx Afsndn Ageasf Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2026, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: Lsdpfx Ajng Exajfashf The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 800-900 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Year of construction: 2003, condition: good (used), functionality: fully functional, machine/vehicle number: 03234, 6 Brush ( 3 pairs) descaling machine for steel wire size 5.5mm - 16.0 mm max (low carbon) Brush pairs arranged in a 60 degree offset for maximum effect. Lsdpfx Afjx R Uzdoaohf A very clean looking machine. On site viewing and inspection recommended

Year of construction: 2008, condition: good (used), Machine type: Finishing machine Manufacturer: Supfina Grieshaber GmbH & Co. KG Lhsdpfx Ajlrt Saofaef Model: 622/1 Serial number: 760001 Year of manufacture: 2008 Available immediately Ex site for self disassembly Optionally we can offer dismantling and loading

Condition: excellent (used), Bosch U-HD 350 Kg/h. Bj2015 Weishaupt burner gas or oil possible Lhsdpfx Afom Rhdysaof

Year of construction: 2025, condition: new, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.4.B62.00 5000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Lhedolxyhfopfx Afaef Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the filter cartridges - cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: new, Year of construction: 2025, Dedusting system with pre-chamber separator specially developed for aggressive sandblasting dusts, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.16.B250 15,000m³ (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas compartment with filter cartridges and clean gas compartment with filter cleaning by means of compressed air, each with separate maintenance doors that are easy to open. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the 16 filter cartridges - cleaning. Ledpert H Izjfx Afaehf Technical data, approx. Type PF 1.16.B250 W x D x H 1.6 x 1.9 x 4.2m Air flow rate 15000 cbm/h Filter cartridges 16x 15,6m² Filter area 249.6 m² Filter medium PE fiber fleece Residual dust content 99.9%

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: Lhsdjdrtalepfx Afasf a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: new, Year of construction: 2025, functionality: fully functional, volume flow: 16,000 m³/h, power: 15 kW (20.39 HP), Mobile filtration unit 15 kW with 16,000 m³/h extraction capacity for aggressive dusts with pre-chamber separator. Assembly in approx. 10 minutes. Cartridge cleaning by compressed air pulse jet. 16 filter cartridges, 15.6 m², Bio Class M. Dust collection via big bag. The filter consists of 2 separate parts that are assembled using a forklift. Connection is made using 6 quick-release locks and 2 connector plugs. A duct or extraction hose can be connected at the rear of the filter. Ljdpfew Ivp Nsx Afajhf