Used Flat Spiral Base Jaws for sale (14,618)

Condition: used, Year of construction: 1990, saw blade diameter 350 mm dimensions of saw-blade 350 x 32 x 2,5 mm cutting diameter 115 mm capacity 90 degrees: square 95 mm capacity 90 degrees: flat 180 x 95 mm capacity 45 degrees: round rechts & links 110 mm capacity 45 degrees: square rechts & links 95 mm capacity 45 degrees: flat rechts & links 125 x 95 mm capacity 60 degrees: round 90 mm capacity 60 degrees: square 80 mm capacity 60 degrees: flat 90 x 95 mm cutting speed 15 - 90 m/min Fgsdswvl E Rjpfx Albog total power requirement 2,5 kW weight of the machine ca. 400 kg dimensions of the machine ca. 1000 x 950 x 1800 mm Features: - With miter adjustment 60° left / 45° right - Machine base

Condition: new, Year of construction: 2021, Benchtop polishing machine / flat polishing machine for parts up to 3000 mm in length. With one or two polishing units. The base machine and control cabinet are new, the polishing units are used but have been completely overhauled with a new polishing motor. Fgodpfxjg D Rfmo Albog

Condition: used, Year of construction: 2005, - Automatic infeed table - KFA unit - Return system Used single-sided edge banding machine Manufacturer: IMA Type: Combima Systems / I/R751220/R3 1 single-sided combination machine for trimming, edge gluing and edge finishing of panel-shaped workpieces made of wood and/or wood-based materials. - Automatic infeed table - KFA unit - Return system Technical data "Workpiece": Workpiece length - min.: 238 mm - max.: 2350 mm Workpiece width - min.: 142 mm - max.: 800 mm Workpiece thickness: - min.: 8 - 40 mm Technical data "Strip" (only for longitudinal processing): Roll material: - Paper edge bands & plastic edge bands: 0.3 - 3.0 mm - Veneer edge bands: 0.5 - 3.0 mm Edge height: - min.: 14 mm - max.: 45 mm Technical data "Machine": Variable workpiece overhang from the chain conveyor (including edge with edge thickness 0.3-3 mm): - min.: 40 mm - max.: 80 mm - PC control ICOS open - Feed speed v=5-25 m/min, frequency-controlled drive - Inclined roller table as infeed section NC infeed system for front and carcass parts - for length and width-independent automatic workpiece feed in single-sided edge processing machines. Only for the production of strip material in the 2nd pass - An additional stop rail, adjustable via NC axis. Double milling unit 08.376: - Controllable - Motor 1 operating in the same direction and motor 2 operating in the opposite direction - Reserve space on the unit carrier for a double trimming unit with electrical pre-installation for 2 x 6.6 kW. - Heater 300 lg, 2x1.5 kW, for preheating the workpiece edge. - Gluing unit 04.1570 system for straight edges and adhesive application to the workpiece. The edge thickness depends on the magazine used and is max. 3 mm. - Adhesive application for workpiece thickness max. 50 mm - 2 pre-melting tanks for PU adhesive - 12-position edge magazine for roll material 0.3-3 mm thick. (8 slots up to 3 mm, 4 slots up to 1.3 mm) Vertical roll holder for 12 rolls: - max. roll diameter 850 mm - max. edge height 45 mm - Trimming unit 08.42, for 2 motors mounted on the upper pressure bar - Pre-milling and milling unit with height sensor - with 1 motor 1000 W Fgjdpfx Ajzuyplolbog - Multi-profile / chamfer unit, with 2 motors 1000 W - Contour milling unit KFA 30 - Multi-profile drawing blade unit - Flat drawing blade 08.517 - Copy edging unit 08.604 - Edging unit 08.617-2 - Double milling stand 75.184, 1050 mm high, both stand sides can be used - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 6000 rpm - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 600 rpm - Motor spindle for the use of the Hydro-Format tool system - Return system, manufacturer Meinert Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: new, Center distance ----- 1000 mm Center height ----- 180 mm Swinging diameter ----- 360 mm Fgodpfjga Ty Esx Albeg Headstock bore ----- 40 mm Bed width ----- 260 mm Spindle speed ----- 40-1800 rpm Motor ----- 2.4 KW Weight ----- 1350 kg INCLUDED * 3-axis digital readout, brand SINO * Quick-change tool holder, type Multifix TOOE5, with 4 tool blocks * 3-jaw chuck, 200 mm * 4-jaw chuck, 200 mm * Faceplate, 250 mm * LED work light and coolant system * Fixed and traveling steady rest HEAVY-DUTY DESIGN WITH A CAST IRON BASE

Condition: used, 4-jaw chuck WMW type DHK 315x4 with individually and centrally adjustable clamping jaws Diameter: 315 mm Inner diameter: 98 mm Speed: max. 850 rpm - Cylindrical centering ring mount Ø 265 mm - Scroll chuck with centrally adjustable clamping jaws - Individually adjustable clamping jaws via threaded spindle between base and step top jaws - Stepped chuck jaws can be rotated for use as drill or turning jaws Weight: 38 kg Very good condition Fedoxciv Rjpfx Albjgg

Condition: ready for operation (used), Lead and lathe with indexing head GEMA LZ 200 incl. new 3-axis digital display -Three-axis digital display "NEW" -Guideways in perfect condition -Center height 200mm -Turning diameter over bed 400mm -Turning diameter over cross slide 200mm -Distance between centers 1000mm -Spindle bore 54mm -Speed range 36 - 2200 rpm -Automatic / Longitudinal and facing feeds -Tailstock MK 4 / Quill travel 200mm -Three-jaw chuck 250mm -Electric chuck guard -Multifix base with inserts -Coolant system Fsdpfx Aey U Rc Selbjgg -Work light -Chip tray -Machine feet Dimensions: L x W x H 2 x 1.2 x 1.6 meters / Weight 1800 kg Errors and omissions excepted.

Year of construction: 2020, operating hours: 10,000 h, condition: excellent (used), functionality: unexamined, FFP1,FFP2,FFP3,Carbon Layer Available Cup type, C type, Duckbill type, Flat-Fold type. FFP2 masks are suitable for filtering out at least 94% of airborne particles, including dust, smoke, aerosols, and droplets. They protect against hazardous materials up to 10 times the workplace exposure limit. They are widely used across several settings: Healthcare: Protecting wearers against airborne viruses, bacteria, and pathogens (such as influenza and COVID-19). Construction & DIY: Safeguarding lungs from hazardous dusts generated by drilling, masonry work, plastering, sanding, and handling loft insulation. Fjdpeza E Raefx Albsgg Industry: Filtering oil and water-based mists, as well as dusts found in woodworking, agriculture, and waste management. An FFP3 mask (Filtering Facepiece 3) is a high-grade respirator used to protect against hazardous airborne substances. It filters at least 99% of airborne particles and is essential in environments with high concentrations of toxic dusts, aerosols, and pathogens.

Condition: used, Year of construction: 2023, operating hours: 1 h, MULAG Combination Mowing Device MKF 600 for Mounting on Unimog Mowing combination MKF600 consisting of: - Front boom mower MFK 500 - Verge mower MRF Base unit for single or dual-operator use, designed for front mounting plate size 5 with the following specification: Equipment Front Boom Mower MFK 500 Fgedpfx Asx R Uw Solbjg * Designed for right-hand operation * Boom swivel range: 190 degrees * Hydraulically actuated collision protection with damping of the boom system via hydraulic accumulators * Hydraulic lateral shift of the boom by 1300 mm (in combination operation) / 1800 mm (in solo operation) * Float position of mowing units can be switched on/off * Quick-change device for mowing units * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve * Operating hours counter * Proportional mlcontrol permanent hydraulics included * (CAN bus technology) for the boom, including dual-cylinder actuation (multiple functions may be performed simultaneously) * Boom relief regulation type AER with stepless ground pressure adjustment via potentiometer, can be switched on/off * Operator information system with TFT color display, including system monitoring and diagnostic support * Multifunction lever mlbasic single-handed control unit with multifunction lever (ergonomically designed for right hand use, 4 functions on one plane. All functions are proportionally controllable) * Combination control panel * Control of both units via multifunction control lever * Oil cooling system with electric temperature monitoring included * Tool drive via front PTO * Hydraulic pump for 1st implement drive 62l / 340 bar * Hydraulic pump for 2nd implement drive 50l / 280 bar * Filled with Panolin HLP Synth, fully synthetic, rapidly biodegradable hydraulic oil * Telescopic boom system hydraulic adjustment for extending reach by 1,000 mm * Reach 6.50 m from vehicle center in combination operation * Reach 7.00 m from vehicle center in solo operation * 2-way electro-hydraulic switching valve controlled from operator panel (additional hydraulic dual functions) * Hydraulic rotation device for mowing implements, swivel range of 230°, operable from control panel. Boom side integrated, including quick-change plate * Hydraulic couplings: Quick coupling kit for flat-sealing quick couplers on mower * Cable set ES6 Front Unimog Connection of operator panel via universal electrical interface ES6 of Unimog * Hydraulic stabilizer legs included, 2 pieces, height adjustable * LED work lights, 2 pieces, mounted on boom * High-pressure water hose routing on boom Verge Mower MRF 350 consisting of the following configuration: Verge Mower MRF 350 * For right-hand operation * Reach 3.50 m from vehicle center * Hydraulic lateral adjustment of verge mower by 1000 mm (in combination operation) * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve (knife shaft overrun limited to approx. 4 seconds) * Operating hours counter * Sensing automatic: control of the mowing head around obstacles. Mowing speed adjustment for evasive movement is steplessly adjustable by the operator at the control panel. * Single-hand operation unit with holder in Unimog Verge Mowing Head RMK 1200 * Working width: 1200 mm, Cutting thickness: max. 10 mm * MS-R blade * Knife shaft speed: approx. 3000 rpm * Standard sensing arm Mowing Head MK 1200 plus * Working width: 1200 mm, Cutting thickness:

Condition: used, Year of construction: 1986, machine/vehicle number: 0783, type of input current: three-phase, input voltage: 400 V, Miter cold circular saw EISELE Type VMS-III-S-PV Type No. 430 Machine. No. 0783 Year of construction 1986 Sawing range at 90°: (round) Ø 120 mm Sawing range at 90°: (flat) 150 x 110 mm Sawing range at 45°: (round) Ø 100 mm Sawing range at 45°: (flat) 120 x 100 mm Saw blade diameter: 350 mm Saw blade speed: 17 + 34 rpm Mitre cut 45° to the left, 90° and up to 30°(60°) to the right infinitely variable Motor power: 2 and 2.6 kW Mains connection: 380 Volt, 50 Hz Features: - Semi-automatic vertical cold circular saw - Pneumatic material quick clamping device - Infinitely adjustable pneumatic saw blade feed - Convenient miter adjustment with fixed stops - Saw carriage on very stable rectangular guide - Comfortable and stepless stroke adjustment of the saw unit via clamping lever - Generously dimensioned gearbox - with Eisele rotation compensation for long saw blade service life - Simple saw blade change - High productivity with minimum space requirement (less than 1 m²) - Coolant system in the machine base Fedpfxjt A Ar Sj Albsgg Space requirement: 1100 x 710 x 1900 mm (L x W x H) Weight 460 kg The machine can be tested / demonstrated under power on site. All information without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.

Condition: ready for operation (used), Year of construction: 2018, total height: 2,414 mm, total width: 1,110 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 500 mm, overall weight: 800 kg, product length (max.): 1,266 mm, number of axes: 3, This 3-axis Hexagon Tigo SF 05.06.05 was manufactured in 2018. It features a measuring volume of 500 x 580 x 500 mm and a granite measuring plate with high-precision linear ball bearing guideways. The machine supports a maximum workpiece weight of 150 kg and operates without the need for compressed air. If you are looking to get high-quality measurement capabilities, consider the Hexagon Tigo SF 05.06.05 CMM machine we have for sale. Contact us for further details. Fsdpezufkbofx Albogg - Machine Structure: Cantilever design with steel frame construction- Overall Dimensions (X x Y x Z): 1110 x 1266 x 2414 mm- Table Specifications: Granite measuring plate (fixed desk) with M8 x 1.25 threaded inserts, flatness according to DIN 876/II- Guideways: High-precision linear ball bearing guideways- Measuring System: METALLUR scale, resolution 0.039 µm- Pinion/Ram Counterbalance: Steel spring- Max. Workpiece Weight: 150 kg- Compressed Air Requirements: No compressed air required (does not require compressed air, meaning no air compressor is needed!)- Dynamics (3D Speed): Max. 520 mm/s- Dynamics (3D Acceleration): Max. 1750 mm/s²- Scanning Speed: Max. 300 mm/s- Temperature Range for Guaranteed Uncertainty: 15 to 30 °C- Operating Temperature Range: 10 to 45 °C- Relative Humidity: 40% - 70% non-condensing- Temperature Compensation: Multi-sensor temperature compensation technology- Probe / Sensor Systems Compatibility: Equipped with LSP-X1c touch probe system (Max. probe weight: 33g; Max. probe length: Axial 125 mm, Lateral 60 mm); also compatible with TESASTAR-m M8 / TESASTAR-mp- Controller & Operating System: All-in-one system with integrated PC and controller in the base, adjustable arm mount for screen, keyboard, and lightweight jogbox- Advanced Software Modes: Fly2 Mode (trajectory optimization), Eco Mode (automatic shutdown)

Condition: new, Nicotra Gebhardt ZDS 20-0071 Base silencer Base silencer for inlet-side silencing of roof fans Manufacturer: Nicotra Gebhardt Type: ZDS 20-0071 Fgedeq Tpzhopfx Albjg Base silencer Flat roof base galvanized sheet steel Further articles - new and used - can be found in our store! International shipping costs on request!

Year of construction: 1989, condition: ready for operation (used), Processes: nickel strike, alkaline/cyanide zinc plating, base material: steel, stainless steel, throughput capacity for racks: approx. 11/h, production time: operating time minus rack cycle time, drums per rack: 1, internal drum length: 870mm, width across flats: 350mm, average loading weight per drum: approx. 37kg, max. loading weight per drum: approx. 50kg, the loading weight depends on the geometric surface area of the parts, anode distance: 650mm (700mm for electrolytic degreasing), operating voltage: 3x 220/380V, 50Hz, Mp/SL (-15 to +10%), heating: electric, heating-up time: approx. 5h at an initial temperature of approx. 15°C, cooling: cooling water, supply: 8°C, return: 12°C, city water: 2bar, circulating water: 2bar, compressed air: 8bar, drive/control power: approx. 166kVA, rectifier power: approx. 240kVA, heating power: approx. 136kW, extracted air volume: cyan./alk. 12,000m³/h, acidic/alk. 19,450m³/h, dissipated heat quantity: approx. 80,000kcal/h, the system has been emptied of all substances, transformers are free from hazardous materials, complete documentation available. An on-site inspection is possible. Fgodpfx Aljy T N Iqebeg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 28 mm Fgjdpfx Aezxzhqolbeg -Dimensions: see photo technical drawing -Overall dimensions: 100/85/H65 mm -Total weight: 2.5 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws Fgodpfx Aozxzhdjlbjg -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 28 mm -Dimensions: see photo technical drawing -Overall dimensions: 100/85/H65 mm -Total weight: 2.5 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws Fedpfx Ajzxzhkslbjgg -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 28 mm -Dimensions: see photo technical drawing -Overall dimensions: 100/85/H65 mm -Total weight: 2.5 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 30 mm -Dimensions: see photo technical drawing -Overall dimensions: 135/90/H75 mm Fodpfx Aezxzg Tolbegg -Total weight: 4.4 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 30 mm Fedezxyvyepfx Albegg -Dimensions: see photo technical drawing -Overall dimensions: 135/90/H75 mm -Total weight: 4.5 kg

Year of construction: 1997, condition: refurbished (used), overall weight: 300 kg, total length: 1,270 mm, total width: 550 mm, total height: 570 mm, 4 spiral casing pumps in process design 1 of these completely overhauled, ball bearings of the pump and motor new. Mechanical seal overhauled by a specialist company. All seals new. Fsdpeiuznujfx Albegg Flow rate: 6 m³/h Head: 25 m Pump speed: 1440 rpm Shaft seal: double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: closed two-channel impeller Impeller diameter: 277 mm Bearing type: rolling bearing Impeller side: 1x NU411 Drive side: 2x 7311 Lubrication type, drive side: oil Lubricant monitoring: oil level regulator Materials: Pump casing: Duplex steel Noridur 1.4593 (9.4460) Partition wall: Duplex steel Noridur 1.4593 (9.4460) Pressure cover: Duplex steel Noridur 1.4593 (9.4460) Shaft: Hardened steel C45+N Impeller: Duplex steel Noridur 1.4593 (9.4460) Bearing housing lantern: Grey cast iron EN-GJL-250 Shaft sleeve: Duplex steel 1.4462 Suction nozzle nominal size: DN 80 Discharge nozzle nominal size: DN 40 Nominal pressure suction side: PN 10 Nominal pressure discharge side: PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with intermediate sleeve Base plate: Grey cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 rpm Frequency: 50 Hz Rated voltage: 400 V Motor rated power: P2 7.50 kW Thermal class: F Motor protection type: IP55 Cosphi: 0.82 Dimensions: Length: 1270 mm Width: 550 mm Height: 570 mm Weight: 300 kg The material 1.4593 Noridur is very well suited for: - Chemical and process industries - Sulfur and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coking plants - Textile and pulp industry - Food and sugar industry - Mining/coal mining and transport - Flue gas desulfurization plants - Acidic, chloride-containing wash suspensions - Acidic process water - Wastewater treatment/sewage treatment plants - Offshore and marine technology

Condition: as good as new (ex-display), Year of construction: 2025, I - beam section - flat steel 80 x 20 (d 1200) mm I-beam section - upend 80 x 25 (d 2100) mm L-beam 50 x 50 x 6 (d 1000) mm bar material - diameter 40.0 (d 800) mm square material 60x60x3 ( d 4000 ) mm rectangle 80x30x3 ( d 6000 ) mm roll surface width 177x60 (18x5 Nut) mm bar material dia. max. 70 x 2.0 (d 1600) mm tool adaptor 60.0 mm turning speeds 6.4 m/min. oil volume 80.0 Liter total power requirement 4.75 kW weight 1080 kg range L-W-H 940 x 1260 x 1390 mm Exhibition machine from 2025 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: Fgsdpfxsxcuipj Albjg - electro-hydraulic ring/profile bending machine - hydraulic bottom/side roller adjustment * for extra small bending radii - bottom/side roller can be adjusted individually - 3x driven rollers - divided roller segments - digital position display of the bottom/side rollers * Display with touchscreen function - hardened tool holder (42CrMo4) - machine base - 2x manually adjustable side guides - horizontal and vertical work possible - freely movable control panel - pressure gauge / pressure display for the rollers - CE mark / declaration of conformity - operating instructions in German

Condition: as good as new (ex-display), Year of construction: 2025, I - beam section - flat steel 80 x 16 (d 1200) mm I-beam section - upend 50 x 15 (d 1000) mm L-beam 50 x 5 (d 1200) mm round material 40.0 (d 800) mm bar material dia. max. 70 x 2.0 (d 1600 ) mm square material 80x30x3 (d 4000) mm channels - flange UNP 80 (d 800 ) mm bending speed 4.4 m/min roll diam. toproll 157 mm Fgjdexabr Sspfx Albjg bore 50.0 mm oil volume 18.0 Liter total power requirement 1.1 kW weight 485 kg Exhibition machine from 2025 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - electro-hydraulic ring/profile bending machine - hydraulic bottom/side roller adjustment * for extra small bending radii - bottom/side roller can be adjusted individually - 3x driven rollers - divided roller segments - digital position display of the bottom/side rollers * Display with touchscreen function - hardened tool holder (42CrMo4) - machine base - 2x manually adjustable side guides - horizontal and vertical work possible - freely movable control panel - pressure gauge / pressure display for the rollers - CE mark / declaration of conformity - operating instructions in German

Condition: ready for operation (used), Year of construction: 2023, operating hours: 150 h, functionality: fully functional, measuring range X-axis: 230 mm, measuring range Y-axis: 230 mm, measuring range Z-axis: 550 mm, workpiece weight (max.): 300 kg, empty load weight: 2,550 kg, TECHNICAL DETAILS Workpiece Data: Module range: min. 0.3 mm – max. 20 mm (0.1 – 20 mm) Helix / lead angle: min. 0° – max. 90° Inspection diameter for gears between centers: max. 400 mm Workpiece diameter: max. 490 mm Vertical measuring range (Z-axis): 550 mm (700 mm) Horizontal measuring range / rolling path (X-axis): ± 115 mm Permissible mass moment of inertia: max. 5 kg·m² Permissible workpiece weight: max. 300 kg Center distance: min. 50 mm – max. 800 mm (50 – 1,000 mm) Chart Recording: Magnification: 50x / 100x / 200x / 500x / 1,000x / 2,000x / freely selectable Longitudinal magnification: 0.5x – 1x – 2x – 4x – 5x – 10x – 20x Machine Accuracy: VDI/VDE 2612 Part 1 and 2 as well as 2613 Group I At +18 °C to +22 °C, reference temperature 0.5 K/h; 2 K/d; 2 K/m MPEE₀ ISO 10360-2 (2010): 1.8 + L/450 mm VDI2631 Radial guideway deviation: 0.2 µm Roundness Ø100/L: 0.3 µm Flick 15W/U/L: 1.5 µm Flick 50W/U/L: 1.5 µm Straightness Ø70/L: 0.4 µm Coaxiality: 1.2 µm Total runout: 1.5 µm Machine Accuracy At +15 °C to +35 °C Reference temperature: 2 K/h; 12 K/d; 2 K/m MPEE₀ ISO 10360-2 (2010): 1.8 + L/250 mm VDI2631 Radial guideway deviation: 0.4 µm Roundness Ø100/L: 0.5 µm Flick 15W/U/L: 1.8 µm Flick 50W/U/L: 1.8 µm Straightness Ø70/L: 0.6 µm Coaxiality: 1.4 µm Total flatness runout: 1.8 µm Evaluation Software: Spur gears – external and internal helical gearing up to 60° Standards: DIN 3960 / 3962, free tolerances, AGMA 2015, ANSI B92.1, DIN 5480, ISO 1328:1995, JIS B1702:1998, JIS B1702:2016, GBT 10095:2008, ISO 1328:2013 Functions: Profile and flank line, tooth thickness variation, pitch and two-ball measurement, crowning, bevel, trapezoidal and bevel gear teeth Root and tip circle measurements, determination of tip and root diameter over up to six teeth or up to four teeth at three measuring heights or all teeth at one height on a special measuring sheet Gear Measurement Contact pattern measurement: 3 x profile and 3 x flank line Topography: 10 profiles x 10 flank lines (30 x 30 grid points) Measurement of all teeth on separate special measuring sheet Block gear measurement: up to 10 gearings Alignment measurement: up to 6 gearings and apex determination Storage formats: ASCII format, ASCII mka file, ASCII csv file (grid point deviation) Storage capacity: up to 5,000 workpiece measurement programs MACHINE DETAILS: Fgodpjxamnrefx Albog Net weight incl. standard equipment: approx. 2,150 kg Net weight with active vibration isolation: approx. 2,550 kg EQUIPMENT - PC with software included (currently installed on machine) - Measuring probe and extensions are included - 2x calibration spheres - Surface roughness standard - 2x 3-jaw chucks for various diameters - 1x measuring mandrel for aligning the upper and lower measuring tips - Stand for dial gauge - Driver fixture for a wider range of parts - Transport locks

Condition: used, Year of construction: 2010, We have here a KIRK-RUDY KR215 inkjet mailtable and a KIRK-RUDY KR435 mini tabber available. Inkjet mailatble is year 2008 and the mini tabber year 2011. Fodpfex Ag Tmox Albegg KR215 Inkjet base description Feed and convey a wide variety of products using the KR 215. Used with most major brands of inkjet printing and pressure-sensitive labeling equipment, the KR 215 is the ideal feed and transport solution for your offline coding, addressing and labeling needs. The KR 215 is perfectly suited for handling all kinds of direct mail pieces as well as flat chipboard and corrugated cartons. A fully adjustable hopper quickly and easily adjusts for a full range of product sizes from single sheets to broadsheet newspapers. It’s “load from the top, feed from the bottom” design keeps jobs running non-stop. KR435 mini tabber: Product Specification The KR435 handles large 40cm diameter rolls and runs all major types of tabs as well as pressure sensitive stamps and labels of various shapes and sizes. Key features like side register belts, side to side top plate adjustment and automatic tab sensor setup keep the tabbing process consistent and reliable.

Year of construction: 2005, condition: used, functionality: unexamined, machine/vehicle number: 46787, 46787 Machining center for centric turning operations on crankshafts or shaft-like components with 2 independent machining spindles. Control: Siemens 840D Tool holder: Heller turning broaching wheel 45 tool positions around the circumference Tool diameter: Ø700 in nominal dimensions – tools are not included, but can be acquired or newly manufactured for an additional charge. NC-controlled steady rest supports – without steady rests Retractable 3-jaw chuck on both sides, manufactured by Blessing Automatic loading door from above with a loading interface Fgodozdpvgspfx Albsg Dedicated chip conveyor with high discharge The machine can currently be inspected while powered on. Setup of components is possible after consultation and for an additional charge, including documentation of replacement parts and tools. Safeguarding of the control system and drives is included – delivery free to site. This is the machine base of a 1250mm machine; however, the usable length is limited to approximately 680mm between centers due to the main drive shaft. With a new main drive shaft, a length of over 1050mm would be possible. Year of production: 2005 Machine for centric turning operations of crankshafts or shaft-typical parts with 2 individual machining spindles Machine control: Siemens 840D Tool adapter: Heller turning broaching wheel 45 tool positions around the circumference Tool diameter Ø700 nominal – tools are not included and may be subject to a separate purchase or new procurement from the supplier. NC-controlled roller support – no workrest included Retractable 3-jaw chuck on both sides from Company Blessing Automatic gantry door for overhead loading and corresponding interface Individual chip conveyor with high drop Machine can be inspected while powered on upon request Setup of individual parts possible for a separate cost, including documentation of change-over parts and tooling Safeguarding of control and drives included – free location Machine base is DRZ1250 – effectively, on current driveshaft, limited to 680mm length; with a new driveshaft, it could be extended up to 1050mm.

Condition: used, Year of construction: 1995, Eisele VMS 300 Metal Cold Circular Saw Vertical metal cold circular saw (manual) Eisele Type/Model VMS 300 Condition Used Year of Manufacture 1995 Technical Data Saw blade diameter: Ø 275 mm up to max. 300 mm Saw blade speed: 40 / 80 rpm (2 speeds for steel / stainless steel) Cutting capacity: 90° (round) max. Ø 90 mm (with Ø 300 blade up to 100 mm) Cutting capacity: 90° (square) max. 75 x 75 mm (up to 82 x 82 mm) Cutting capacity: 90° (flat) max. 120 x 75 mm (up to 160 x 82 mm) Cutting capacity: 45° (round) max. Ø 90 mm Cutting capacity: 45° (square) max. 75 x 75 mm Cutting capacity: 45° (flat) max. 80 x 75 mm Fodpjzymc Nefx Albogg Motor power: 1.0 / 1.4 kW (pole-changing) Connection voltage: 400 V / 50 Hz Machine weight: approx. 210 to 300 kg (depending on the base) Space requirement (L x W x H): approx. 700 x 750 x 1,600 mm Equipment - Integrated coolant system - Miter adjustment Inquiry item: Transportation costs in a separate offer.

Condition: used, Year of construction: 2006, centre distance 1000 mm turning diameter over bed 420 mm turning diameter over bed slide 235 turning length 1000 mm spindle taper DIN 55027 Gr. 6 control MANUALPlus 4110 spindle bore 51 mm turning speed range 3 - 3000 U/min feed: 5.000/10.000 mm / min drive capacity - spindle motor 11 kW taper in tailstock-quill MK 4 dia. of quill 70 mm quill stroke 110 mm coolant ja/yes voltage 400 V Number of working hours 6.908 h weight of the machine ca. 3 t dimensions of the machine ca. 3,4 x 2 x 2,2 m BOEHRINGER DUS 400 ti CNC cycle-controlled lathe, built in 2006 -Control system: Heidenhain ManualPlus 4110 -11 kW AC main drive with 2-stage gearbox -Work area cover with chip guard door -Control panel mounted on the support, moves with the machine -Holding brake -Programmable cycles -4-position quick-change turret Fgodszgigdopfx Albsg -Size 2 tool holder on fixed base -With 1 WD ‘/25’ tool holder -Tailstock -Rapid traverse -Coolant system -Machine lamp Condition: Machine runs perfectly, no known faults, ready for immediate use. Accessories: 1 three-jaw chuck 250 mm, bore 62 mm 1 set of hard jaws 4 sets of soft jaws including jaw holders 23 tool holders including tools Translated with (free version)