Used Dunkes Dn 4 for sale (58,411)

Condition: used, Year of construction: 1988, pressure 160 t distance between columns 880 mm stroke 150 mm distance table/ram, max. stroke up, adjustment up 530 mm table surface area 830 x 1000 mm hole in the table 260 x 360 mm table height over floor - 850 mm side window 610 mm ram surface 830 x 1000 mm power requirement 55,0 kW weight 14,7 t Dimensions (WxDxH) 2,2 x 2,0 x 4,3 m Bedey Ruq Eepfx Adrsdd with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in ram (50 t / 10 mm), hydraulic cutting impact cushioning, motoric adjustable depth stop, motoric adjustable table, two-hand operation No foundation pit necessary

Condition: used, Year of construction: 1989, pressure 16 t Bedpfxjyx Ii Re Adrsdd throat 200 mm stroke 160 mm dayligth 490 mm table surface area 1300 (3300) x 250 mm table height over floor 935 mm ram surface 65 mm power requirement 4,0 kW weight of the machine ca. 2,2 t required space 1,4 (5,4) x 1,3 x 2,4 m with oilhydraulic drive, shaft straightening device length of straightening table approx. 1300 + 2x2000 mm

Condition: used, Year of construction: 1985, pressure 100 t Bdjdjyx Ihyepfx Adrsd stroke 650 mm throat 380 mm dayligth 950 mm table surface area 800 x 700 mm table height over floor 920 mm ram surface 630 x 600 mm feed down 16 - 65 mm/s feed up 375 mm/s working feed 0 - 16 mm/s oil volume 350 l power requirement 18,5 kW Weight 9,0 t dimensions of the machine ca. 1,5 x 2,5 x 4,0 mxmxm with oil-hydraulic drive, controllable dependent on pressure/time and way, speed adjustable, two-hand operation

Condition: used, Year of construction: 1982, pressure 200 t distance between columns 1650 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 1200 mm table surface area 1600 x 1250 mm die cushion capacity 80 t Bdedpfxjxwdrve Adrsd die cushion stroke 300 mm die cushion area 1300 x 900 mm table height over floor 800 mm ram surface 1600 x 1250 mm oil volume 2000 l power capacity 43,0 kW weight 25,0 t Dimensions (WxDxH) 2,9 x 2,3 x 5,8 m height beneath floor 0,85 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1992, pressure 6,3 t stroke 305 mm throat 250 mm dayligth 850 mm table surface area 470 x 450 mm table height over floor 800 mm ram surface 40 mm feed down 120 mm/s Bdjdpfxev Svbce Adred feed up 510 mm/s working feed 21 mm/s oil volume 175 l power requirement 2,2 kW Weight 1,5 t dimensions of the machine ca. 1,0 x 1,55 x 2,6 mxmxm with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation

Condition: used, Year of construction: 1998, pressure 315 t stroke 500 mm throat 425 mm dayligth 1000 mm table surface area 1200 x 815 mm table height over floor 800 mm ram surface 1100 x 700 mm feed down 48 mm/s Bodpfxjvzxphj Adrjdd feed up 330 mm/s working feed 19 mm/s oil volume 1600 l power requirement 82,0 kW Weight 23,0 t dimensions of the machine ca. 2,4 x 2,8 x 4,0 mxmxm with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard at front (Sick), two-hand operation

Condition: used, Year of construction: 1993, pressure 315 t distance between columns 2350 mm distance table/ram, max. stroke up, adjustment up 1200 mm distance between cutting impact cushioning 1600 mm Distance table/ram, stroke up 1200 mm stroke 800 mm table surface area 2060 x 1260 mm table height over floor 750 mm Die cushion pressure in table 100 t Die cushion stroke in table 400 mm die cushion area 1250 x 1000 mm side window 780 mm ram surface 2200 x 1500 mm Capacity of ejector in ram 63 t speed down 500 mm/s speed up 310 / 410 mm/s working speed 20 - 73 mm/s quantity of oil 3900 l power requirement 80,0 + 45,0 kW Bdodovuugvjpfx Adrjd weight 55,0 t Dimensions (WxDxH) 4,6 x 2,7 x 7,2 m Height above floor 6,0 m Height below floor 1,2 m with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic ejector in ram, hydraulic cutting impact cushioning, hydraulic ram interlocking

Condition: used, Year of construction: 1993, pressure 2 x 6,3 t Bdsdpfevut Rmox Adrjd stroke 307 mm throat 180 mm dayligth 900 mm table surface area 470 x 360 mm table height over floor 810 mm ram surface 45 mm feed down 137 mm/s feed up 33 mm/s working feed 540 mm/s oil volume 140 l power requirement 3,0 kW Weight 1,5 t dimensions of the machine ca. 1,2 x 1,2 x 2,8 mxmxm with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation Press has 2 Press shafts - press force 2 x 6,3 t

Condition: refurbished (used), Year of construction: 1996, Universal tool milling machine KUNZMANN WF 4/3 With 3 axes Heidenhain digital readout Year of construction: 1996 Travels: X 400 Y 320 Z 400 Speed range: 40 - 2550 rpm Bodpfx Ajq Ulucsdredd With the following accessories: Rigid angle table 800 mm x 360 mm clamping surface Mechanical handwheels for X , Y , Z axis Hydraulic tool clamping Automatic central lubrication pump for X , Y , Z axis Machine light 4-piece machine shoes Coolant device Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICE TRAINING !!! THE MACHINE IS IN GOOD CONDITION !!!

Condition: excellent (used), Year of construction: 2020, 1. WEISHAUPT WM-G10/4-A, (with gas duct) - Output: 100-1100 kW - Design: ZM-LN - Year of manufacture: 2020 2. WEISHAUPT WM-G10/3-A, (with gas duct) - Output: 100-1000 kW - Design: ZM - Year of manufacture: 2015 (1 unit), 2013 (2 units available) 3. WEISHAUPT WM-G10/2-A Design: ZM-LN Output: 75-630 kW Year of manufacture: 2021 4. Bedjwgyrtspfx Adrsdd WEISHAUPT WM-G10/3-A, (with gas duct) - Output: 125-900 kW - Design: ZM-LN - Year of manufacture: 2011 5. WEISHAUPT WM-G10/3-A, (with gas duct) - Output: 100-1000 kW - Design: ZM - Year of manufacture: 2011 6. WEISHAUPT WM-G10/3-A, (with gas duct) - Output: 100-1000 kW - Design: ZM - Year of manufacture: 2009

Condition: excellent (used), For sale: Industrial pump from the renowned manufacturer Grundfos. Model SPK 4-8 – vertical multistage pump designed for clean liquids, coolants, industrial installations, and CNC machines. Technical data: Manufacturer: Grundfos Model: SPK 4-8 A-A-A Power: 0.55 kW Bjdoywpahopfx Adrodd Speed: 2850 rpm Capacity: approx. 3 m³/h Head: up to 28 m Liquid temperature: max 90°C Country of manufacture: Denmark Condition: Used, fully functional. Visible signs of use (abrasions, minor corrosion – see photos). A crack is visible near the nozzle on the casing – does not affect operation (buyer to verify).

Condition: good (used), 4 x Bonfiglioli wind turbine gearbox JB00001227 SN B6201603697 Bdjdpfx Adowg E Utored

Condition: used, Year of construction: 2015, functionality: fully functional, power: 10 kW (13.60 HP), input voltage: 400 V, travel distance X-axis: 4,050 mm, travel distance Y-axis: 2,560 mm, travel distance Z-axis: 280 mm, workpiece length (max.): 3,120 mm, workpiece width (max.): 2,160 mm, workpiece height (max.): 105 mm, number of axes: 4, number of slots in tool magazine: 16, Equipment: CE marking, For sale is a well-equipped CNC machining center, FORMAT-4 profit H10 22.32, manufactured in 2015. This machine is perfectly suited for precise processing of wood, MDF, plastics, and sheet materials. The FORMAT-4 H10 stands out for its high traverse speeds and robust construction. Particularly noteworthy are the powerful 10 kW HSK-F63 milling spindle, the 360° C-axis, and a total of 16 tool positions. Technical Data * Manufacturer: FORMAT-4 * Model: profit H10 22.32 * Year of manufacture: 2015 * Type: CNC machining center Working Area * X axis: 3,120 mm * Y axis: 2,160 mm * Z axis: 105 mm Traverse Paths * X: 4,050 mm * Y: 2,560 mm * Z: 280 mm Traverse Speed * X/Y: 100 m/min * Z: 30 m/min Milling Spindle * 10 kW HSK-F63 milling spindle * Speed range: 1,000 – 24,000 rpm * Clockwise/counterclockwise rotation * Ceramic bearings * Air-cooled Tool Changer * 2 tool changers with a total of 16 tool positions * HSK-F63 interface * Tool slots on the machine frame and mounted laterally Additional Units * C-axis 0–360° Vacuum/Table * Matrix/grid table * 2 vacuum pumps, each 250 m³/h * Two rows of stops Control/Software * FORMAT-4 H10 control system * WoodFlash software * DXF import * 3D graphic display * Parametric programming * Tool database for up to 500 tools * Mobile operator console * Handheld terminal Additional Equipment Bdodpfey Smi Ajx Adrod * Automatic central lubrication * UPS for the control computer * Network/internet preparation * Central extraction system * Preparation for drilling head * Operator tools and documentation included Condition: Machine from ongoing production. Well-maintained condition. Inspection by appointment possible.

Condition: new, Year of construction: 2024, NEW, unused machine!!! DN SOLUTIONS PUMA 5100LMB Year of manufacture: 2024 C-axis with driven tools Control: FANUC OiF touch Chuck: 21 inches (535 mm) Spindle bore: 166 mm Travels: X – 362 mm Z – 2,155 mm Bdedpfx Adey H D Ufored Maximum turning length: 2,002 mm Maximum turning diameter: 650 mm 12-position head BMT 75 Knoll chip conveyor

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity: 9,000 kg, load capacity per storage section: 3,000 kg, total length: 34,000 mm, total height: 4,500 mm, load per truss pair (max.): 3,000 kg, number of shelf rows: 4, frame height: 4,500 mm, pallet spaces: 144 euro pallets, frame width: 1,100 mm, shelf height: 4,500 mm, shelf length: 34,000 mm, support length: 2,700 mm, 4 rows of pallet racks (4 x M45112711-2) each 8.5 m long, 4.5 m high, 1.1 m deep, each with 3 bays, 2.7 m wide, each with 3 beam levels, shelf load capacity 3,000 kg. - 16 frames (RM4511 - RAL5019) - 32 footplates, shims, mounting hardware - 64 floor anchors (ZZBA1210) Bdsdpjy R R R Ijfx Adrod - 72 single beams (T27114 - RAL2008) - 4 load capacity signs (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - Maximum 20 working days after receipt of payment - Delivered free to construction site/assembly location - Unloading from truck to be carried out by the buyer with their own lifting equipment. - Deliveries possible throughout the entire territory of the Federal Republic of Germany; except islands! Deliveries to EU countries are possible by separate arrangement.

Condition: used, mileage: 10 km, power: 130 kW (176.75 HP), first registration: 02/2026, fuel type: diesel, color: grey, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 7,391 mm, total width: 2,040 mm, total height: 2,590 mm, loading space length: 4,606 mm, loading space width: 1,832 mm, loading space height: 1,961 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, * Exhaust system: EU6e (EC) compliance * All-wheel drive 4x4 * 8-speed automatic transmission for 4x4 * Diesel engine 2.0 l/130 kW (4 valves) BiTurbo * Start-stop system with brake energy recuperation * Front towing eye * Preparation for trailer coupling * 75-liter fuel tank * Rear axle differential lock (manually engageable, mechanical) * 3.5t homologation * Reinforced front axle * 4 steel wheels, 6 1/2 J x 16, with 1,050 kg load capacity, black * Operating voltage 12V * Electronic immobilizer * Electrical terminal strip and KFG * 'Climatronic' air conditioning in the cab * Daytime running lights with assist function, Coming & Leaving Home feature * LED main headlights with LED daytime running lights * LED interior lighting concept in passenger/cargo area * Fog lights including cornering light * Side marker lights * Headlight cleaning system, washer fluid level display, heated washer nozzles * Step lighting * Exterior mirrors, electrically adjustable, heated and foldable * Exterior mirrors left and right, convex, with integrated LED indicator and wide-angle section * Entry handles on rear pillars * Rear wing doors with enlarged opening angle * Intermittent wiper control with light and rain sensor * Laminated windshield with thermal insulation, heated * Airbags for driver and passenger, with passenger airbag deactivation * Roof shelf with storage compartments, two 1-DIN slots, and reading lamp * Electronic parking brake * Premium interior noise reduction measures * Lockable, illuminated glove compartment * Heated leather multifunction steering wheel with Tiptronic * 12V socket, cup holders * Height-adjustable 3-point automatic seat belts * 12V socket in the cab (dashboard) * Seatbelt monitoring, electrical contact in buckle * 2 remote keys * Keyless Go * Auxiliary water heater with remote control * Chrome package * 'ergoActive' suspension seat, left * 'ergoActive' suspension seat, right * 'Toronto Grid' fabric seat covers * Individually adjustable heated driver and passenger seats * Digital instrument cluster * Tire pressure monitoring system * USB Type-C data and charging ports with enhanced charging capability * 4 speakers: 2 tweeters, 2 woofers * Digital radio reception (DAB+) * MAN Media Van Navigation Business package (12.9") * MAN SmartLink * MAN Connect * Comfort telephony with LTE and wireless charging * With voice control * Hill start assist * Emergency braking assist * ESP with electronic differential lock, traction control (ASR), and ABS * Front and rear parking sensors * ACC Stop & Go * Traffic sign recognition * Reversing camera system with dynamic guidelines * High beam assist 'Light Assist' * Driver attention and fatigue warning * Lane change assist * Crosswind assist * Blind spot warning on both sides and start-off warning * Turn assist * Emergency assist (active lane keeping assistant, emergency assist, and traffic jam assist), Intelligent Speed Assistant * Multifunction camera * Cruise Assist Plus * Entry handle on partition wall in cargo area * Tie-down loops for cargo securing * Driver assistance package * Light & Visibility package * Comfort Package Plus * Ascot Grey * Country cluster 'WLTP EU approval' * Preparation for alcohol interlock Bdodpsylr Dqsfx Adrod * Complete N1 type approval Conversion service available for panel van commercial vehicles: e.g., retrofitting a tow bar €990.00, trailer load upgrade €714

Condition: excellent (used), Year of construction: 2025, Format 4 Kappa 450 x-Motion 2-axis control, height and tilt adjustment Technical data: - Cutting length: 2800 mm - Cutting width: 1300 mm Bodpfxsy Rp D Te Adrjdd - Cutting height: 155 mm - Max. saw blade Ø 450 mm - X-motion control - Angle scale with length compensation - Extractable Ø 120 mm - Motor power: 10 kW - Year of construction: 2025 Duplex mitre fence

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 6,000 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 560 mm, spindle motor power: 15,000 W, total height: 1,693 mm, total width: 1,595 mm, overall weight: 3,600 kg, controller manufacturer: FANUC, controller model: 0i PLUS, product length (max.): 2,805 mm, number of axes: 3, This 3-axis DN solutions LYNX 2100LMSA was manufactured in 2022. It features a maximum turning diameter of 300 mm and a turning length of 510 mm. The machine includes a 6-inch chuck size, a 12/24 station turret, and a sub-spindle for enhanced capabilities. If you are looking to get high-quality turning capabilities, consider the DN Solutions LYNX 2100LMSA horizontal turning machine we have for sale. Contact us for further details. • Condition: New, 0 operating hours • Control unit: FANUC 0i PLUS with 15” touchscreenCapacity • Chuck size: 6 inch • Max. turning diameter: 300 mm • Max. turning length: 510 mmAxes / Travels • X-Axis rapid traverse: 30 m/min • Z-Axis rapid traverse: 36 m/min • Number of linear axes: 2 (X / Z) • C-axis: Spindle positioning for milling and drilling operationsMain spindle Bjdpfx Adsy Ex A Uorodd • Max. spindle torque: 127 NmSub-spindle • Sub-spindle: Yes • Max. sub-spindle speed: 6,000 rpmTurret • Turret stations: 12 / 24 • Rotary tool speed: 6,000 rpmIntegrated options • Automatic tool setter • High-pressure coolant system: 7 bar Additional equipment • Chip conveyor • Robot interface • Automatic door • Parts catcher with conveyor Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: good (used), mileage: 162,387 km, power: 130 kW (176.75 HP), first registration: 10/2018, fuel type: diesel, tire size: 205/75R16, axle configuration: 4x2, wheelbase: 4,490 mm, fuel: diesel, color: grey, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 3, total length: 7,000 mm, total width: 2,040 mm, total height: 2,590 mm, loading space length: 4,120 mm, loading space width: 1,780 mm, loading space height: 1,920 mm, Year of construction: 2018, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, electric window regulation, navigation system, power mirror, traction control, trailer coupling, = Additional Options and Accessories = - Heated mirrors - None - LED lamp - Manual - Radio/cassette - Rear view camera - Fabric - Partition = Notes = Configuration: 4x2, Payload: 1365 kg, Tare weight: 2135 kg, Gross vehicle weight: 3500 kg, Trailer load, unbraked: 750 kg, Trailer load, center axle, braked: 3000 kg, Tow hitch, Type of cabin: Single cab, Air conditioning, Number of airbags: 2, Parking assist: Front and rear, Electric windows, Electric mirrors, Partition, Radio/cassette, Carplay, GPS navigation, Color: Grey, Metallic, Heated mirrors, Rear view camera, Type of lighting: LED lamp, Air conditioning, Bluetooth, Engine power: 130 kW (174 hp), Fuel: Diesel, Euro: 6, Drive technology: Timing belt, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Body type: additionally extended, Side wall paneling, Rear step, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 3, Seat arrangement: 1+2, Seat cover: Fabric, Seat adjustment: Manual, L4H3 Maxi LED Navi Automatic Camera Automatic Air Conditioning Tow Hitch PDC Euro6 177 HP!, Tire type: Winter tires = Additional Information = General Information Number of doors: 1 Registration number: V-59-JPJ Axle Configuration Tire size: 205/75R16 Brakes: Disc brakes Axle 1: Tire tread depth left: 2 mm; Tire tread depth right: 2 mm; Suspension: Coil spring suspension Axle 2: Tire tread depth left: 5 mm; Tire tread depth right: 5 mm; Suspension: Leaf spring suspension Weights Unladen weight: 2,135 kg Payload: 1,365 kg GVW: 3,500 kg Functional Loading area height: 56 cm Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Bdjdpfx Ajyx S Ikodrjd Financial Information Leasing price: €351 per month (delivery van, 72 months); Ask for more information and conditions.

Condition: excellent (used), mileage: 813,025 km, power: 427 kW (580.56 HP), first registration: 11/2018, fuel type: diesel, tire size: 385/65, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, fridge, onboard computer, parking heater, power mirror, retarder, spoiler, trailer coupling, = Additional Options and Equipment = - 2-pedal control - Adaptive cruise control - Alarm system - Aluminum fuel tank - Android Auto - Apple CarPlay - Heated mirrors - DAB radio - Roof spoiler - Differential lock - Remote central locking - High beam headlights - Speed limiter - Intarder - Air conditioning - Leather interior - Leather seats - Alloy wheels - Air suspension - Air-suspended seats - Air horn - Side skirts - Sun visor - Lane departure warning system - Stability control - Auxiliary heater (parking heater) - Xenon headlights - Towing jaw = Additional Information = Bodpfxsy Ndn Ds Adrsdd Front axle: Tire size: 385/65; Alloy wheels; Steered Rear axle: Tire size: 315/70; Twin tires; Differential lock; Alloy wheels Upholstery: Leather Technical condition: very good Visual condition: very good Please contact Maarten Busser or Niels Busser for further information.

Condition: excellent (used), pressure 16 t Bdedpfx Asyrhmhsdrsd weight of the machine ca. 16 t

Condition: ready for operation (used), Year of construction: 2013, operating hours: 42,000 h, functionality: fully functional, overall weight: 3,315 kg, total length: 3,200 mm, total width: 1,630 mm, total height: 1,960 mm, motor manufacturer: Siemens, power: 236 kW (320.87 HP), volume flow: 3,013 m³/h, operating pressure: 4 bar, noise level: 77 dB, type of cooling: water, Equipment: documentation/manual, type plate available, 1 unit Low-Pressure Screw Compressor Manufacturer: Atlas Copco Model: ZE 4 VSD Year of manufacture: 2013 Volume flow: 3,013 m³/h (50.2 m³/min) Operating pressure: 4 bar Operating hours: approx. 42,000 hours Shaft power: 225 kW Drive power: 236 kW Discharge temperature with aftercooler: 40°C Discharge temperature without aftercooler: 244°C Compressor speed: 3,630 rpm Speed control: with integrated frequency converter Cooling: Water-cooled with stainless steel shell-and-tube heat exchanger FUNKE 1.4571 Electric motor: Siemens 1LG6 316-4ZZ91-Z Dimensions Length: 3,200 mm Width: 1,630 mm Height: 1,960 mm Weight: 3,315 kg Also available: Cyclone Afterseparator Manufacturer: BZ Zyklone Model: 175 (stainless steel) Condensate drain Bekomat Shell-and-Tube Heat Exchanger Manufacturer: Funke Model: A100 805-6-1Pass Material: Stainless steel 2x Rubber Expansion Joints 1x Intermediate Flap Valve DN 150 with Auma Actuator SG 05.1 F07 Bedpsywr Tkefx Adredd 1x Cooling Water Control Valve Samson 3274 DN 50 PN 16 1x Steel Pipe DN 150 with 2x 90° bends

Condition: excellent (used), Year of construction: 2022, operating hours: 7,800 h, functionality: fully functional, machine/vehicle number: Puma 2600, turning diameter over cross slide: 630 mm, turning length: 1,245 mm, turning diameter: 376 mm, spindle bore: 102 mm, spindle speed (max.): 2,800 rpm, spindle motor power: 26 W, type of input current: three-phase, controller manufacturer: FANUC, number of spindles: 2, operating hours of spindle: 7,800 h, number of slots in tool magazine: 12, Equipment: chip conveyor, For sale: Turning center with sub-spindle and Y-axis. Machine in perfect condition. Purchased new in mid-2023. Currently in operation, with less than 8,000 operating hours; parts produced well below its technical capacity. Serviced exclusively by an authorized distributor. Adapted for robot operation: equipped with autodoor and external communication signals. Features include parts conveyor and oil mist filter. NOTE: The robot is not included in this offer – separate sale and integration support can be offered upon individual quotation. TECHNICAL DATA according to manufacturer’s specification: 1) Capacity Swing over bed: 680 mm Swing over cross slide: 630 mm Max. turning diameter: 376 mm Recommended turning diameter: 315 mm Max. turning length: 1245 mm Max. workpiece weight (incl. chuck): In chuck: 500 kg (with support: 1000 kg) Bar capacity in spindle: 102 mm 2) Main Spindle Chuck: 315 mm Spindle nose: A2#11 ASA Front spindle bearing diameter: 160 mm Spindle bore: 115 mm Chuck through hole: 103 mm Spindle motor power (S3-25%/S6-60%/S1 Continuous): 26/22/18.5 kW Spindle speed range: 2 - 800 rpm Max. spindle torque (S3-15%): 1123 Nm Power transmission: Belt 3) Sub-Spindle Chuck: 175 mm (optionally 210 mm) Spindle nose: A2#5 ASA Spindle bore (diameter): 62 mm Sub-spindle cylinder bore: 50 mm (H8) Spindle motor power (continuous/30 min): 7.5/5.5 kW Sub-spindle speed range: 4,500 rpm Max. spindle torque (30 min): 85 Nm Power transmission: Belt 4) Axis Travel X axis: 260 mm Z axis: 1350 mm Bedpfxex Rqkuj Adredd Y axis: 105 (±52.5) mm B axis: 1350 mm C axis (1, 2): 360° (0.001° increments) Rapid traverse: X axis: 30 m/min Z axis: 30 m/min Y axis: 10 m/min B axis: 30 m/min C axis: 200 rpm 5) Bed and Saddle Slant bed, tilt angle: 30° Bed guideway (Z axis): 437 mm Saddle (X/Y axis): 321/325 mm Sub-spindle stroke: 335 mm 6) Tooling System Tool holders: BMT 65P Number of tools: 12 Tool size: 25 x 25 mm Max. drill diameter: 50/32 mm (main/sub-spindle) Driven tool motor power (5 min/Cont): 7.5/1.5 kW Driven tool speed: 5,000 rpm Driven tool max. torque: 95.5 Nm Driven tool collets (ER32): Φ3–Φ20mm (option) Turret indexing time: Single position: 0.15 s (1.2 s full station) Max. driven tool drilling diameter: φ20 mm, M20 x P2.5 7) Hydraulic System Tank capacity: 20 l Flow rate (60/50 Hz): 25 / 20.8 l/min Power/Pressure: 2.2 kW x 5.0 MPa 8) Coolant Tank capacity: 250 l Flow rate: 30 l/min Power/Pressure: 0.7 kW x 0.15/0.1 MPa (60/50 Hz) 9) Machine Accuracy Positioning: 0.01 mm Repeatability: 0.02 mm C Axis Positioning: 0.0167° Linear repeatability (axes X/Z/Y): ±0.002/±0.003/±0.003 mm C Axis repeatability: ±0.006° 10) Control System Full electric control for X, Y, Z, C axes For further questions or additional information, please feel free to contact us by message or phone.

Year of construction: 2008, operating hours: 2,008 h, condition: ready for operation (used), overall weight: 15,000 kg, This Dunkes HZS 160 Bending machine was manufactured in the year 2008 and has 2250 production hours. The machine is in good condition and well maintained. Machine Benefits Bdjdpfx Adjyzf A Tsrod Qualitative Machine Benefits • The machine is in good condition and fully functional

Condition: used, axle configuration: 2 axles, total width: 25,500 mm, Year of construction: 2020, Equipment: ABS, For inquiries about the vehicle, Mr. Seidel is your contact person (by phone). trailers S2A 14 LSDN telescopic low-loader. Additional features: Extra rear lights, air suspension, BPW axles, Wabco ABS, Wabco Smartboard, drum brakes, spring-actuated parking brakes, both axles hydraulically steered, radio remote control for steering, hydraulically extendable by 4,500mm, beacon lights, cargo area dimensions: rear platform length 2,680mm, front platform length 3,200mm, low-bed length 5,900mm, width 2,550mm. Tire tread depth: 1st axle 4-10mm, 2nd axle 3-7mm. On request, we will be happy to provide you with a leasing or financing offer. Mr. Seidel (phone) is happy to assist you. Further details can be found on our homepage. ... Subject to errors, changes, and prior sale!!! = Additional information = Bedsyfqywopfx Adrodd Gross Vehicle Weight: 38,000 kg Please contact Tobias Ebert for further information.