Used Dunkes Dn 4 for sale (59,013)

Condition: excellent (used), pressure 16 t weight of the machine ca. 16 t Dkedpjyrhmhsfx Al Asu

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". Dksdpfx Aljyug Hxe Aju The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: good (used), Year of construction: 1998, Press Force 315.00 t Stroke 500 mm Throat 425 mm Installation Height (Upward Stroke) 1,000 mm Table Surface 1,200 x 815 mm Table Height above Floor 800 mm Ram Surface 1,100 x 700 mm Speed Down 48 mm/s Speed Up 330 mm/s Working Speed 19 mm/s Oil Volume 1,600 l Power Requirement 82.0 kW Weight 23.00 t Dimensions (WxDxH) 2.4 x 2.8 x 4.0 m For Permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation Dkjdpfev Rwu Uox Al Asu

Condition: excellent (used), max diameter of machined parts: 140 mm min diameter of machined parts: 40 mm 2-knife cutterhead any length of machined parts motor: 2.2 kW extraction port diameter: 120 mm dimensions (L/W/H): 950x520x1100 mm weight: 95 kg Dksdpjw Twkrefx Al Asu

Condition: good (used), functionality: fully functional, Year of construction: 2017, mobile Air filter extraction box Box with built-in fan and filter cartridge. With HEPA filter. for ventilation, room air filtration and extraction. extraction capacity ca 1800m3/h extraction fan: IMOFA DS 11-4 460watt 50 Hz 4.8 Amp voltage: 230v 50Hz Systemair RTRE 5 transformer controller 4 pcs filter cartridges 1 pc ULTIMA RP Hepa filter 3000m3/h Aluminum frame housing, mobile brakeable wheels Dodovvcqxopfx Al Ajku dimensions: 100x100x80 cm weight: ca 120kg

Condition: good (used), Rexroth IPC40.2G1A-512N-P8C-ND-NN-FW control unit R911306516-102 Djdpfx Alsib H Eie Asku CFG-BTV16.1AN-DL-NN-NN 1070170017-118 FWA-BTVBP8-W2k-01VRS-DE-OEM R911306448-101 More new and used items can be found in our shop! International shipping costs available upon request!

Condition: new, Year of construction: 2025, Safo DNAA 160 Dkedpfx Aljzxhate Asu Finished product diameter 40-160 mm New machine tool.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: FN556243, Year of construction: 2017, operating hours: 8,754 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,600 mm, fuel type: electric, mast type: triplex, construction height: 2,190 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 4,700 mm Free lift: 1,600 mm Overall height: 2,190 mm Load capacity: 3,000 kg MACHINE DETAILS Mast type: Triplex Vehicle type: Electric 4-wheel forklift ISO class: ISO Class 3 = 2,500–4,999 kg Battery voltage: 12 V Battery year of manufacture: 2017 Unladen weight without battery: 3,537 kg Operating hours: 8,754 h EQUIPMENT Side shifter Fork positioner Dkjdpfx Aloz I R I As Aju 3rd valve 4th valve External reference: SL8945SP

Condition: ready for operation (used), Siemens 1PH8165-1DF00-0CA1 compact asynchronous motor, serial no.: YFDN645654804001, used, in good condition, 100% fully functional. Scope of delivery as shown in photos. ATTENTION: Please enquire separately for packaging and shipping costs! Dksdpsx Dv H Sofx Al Aju

Condition: used, mileage: 589,987 km, power: 308 kW (418.76 HP), first registration: 12/2012, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro5, Year of construction: 2012, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Volvo FMx 420 4x2 Tanker Truck VIN: HP093247 Chassis / Attachments: - Wheelbase: 4,000 mm - Leaf and air suspension - Tyres: 315/70 R22.5 - Tread depth remaining: approx. 50% front / 50% rear - 1 x diesel tank - 1 x AdBlue tank Body: - Lindner+Fischer tank body, 2 compartments, year 2005 - 1: 7,300 liters / 2: 6,000 liters - Sening pump - Bartec printer - For heating oil/diesel only - ADR AT - 2x hose reels Cab: - FMx cab Dodpfjwnk Diox Al Aoku - 1 bunk - Automatic climate control - CD radio / USB / AUX / Bluetooth - CB radio - Hands-free system Engine / Transmission: - 10,837 cc // 420 HP / 308 kW / Euro 5 EEV - Automatic transmission - Engine brake - Differential lock Weights: - Gross weight: 18,000 kg - Curb weight: 9,580 kg - Payload: 8,420 kg Other: - German vehicle - ADR conformity: AT+FL - Periodic inspection valid until 04/2029 - Calibrated measuring system valid until 2027 New main inspections / safety checks or payload downgrades/upgrades available upon request. We are also happy to assist you in obtaining export/temporary license plates, and the transfer of your purchased vehicles within Germany is possible as well. Contact us! --- We speak German, English, and Russian! --- No liability for misprints or typographical errors. Subject to change, prior sale, and errors! --- Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge's particular strength lies in the sale of new and used commercial vehicles. With 11,000 m² of space, we offer a wide selection of vehicles. Our corporate philosophy is characterized by fairness and integrity. Customer satisfaction is very important to us, which is why we offer an excellent all-round service package and provide our customers with a competent contact person who supports them in buying or selling vehicles. See for yourself! Our services for you: Vehicle loading We are happy to assist you in loading your purchased vehicles. Organization of special transports We are happy to assist you in organizing special transports. Day plates / export license plates We are happy to assist you in obtaining export or short-term license plates. Customs formalities We are happy to assist you in handling customs matters.

Condition: used, Year of construction: 1982, Technical details: pressure: 2,5 t Dkjdperdlgiefx Al Aju

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: NR: 220.10.029.19, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 28 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, Equipment: CE marking, documentation/manual, High-quality Format4 Tempora 60.06 EL edgebander for sale – ready to work! Take your production to the next level with this lightly used Format4 Tempora 60.06 EL edgebander in excellent condition. Built for industrial performance, this machine delivers outstanding precision and a flawless finish on every panel. - High-precision automatic edge banding - Pre-milling unit for perfect edge preparation - Reliable, consistent gluing system - Complete processing: trimming, milling, polishing - Easy operation and dependable performance Included extras: - Red air tank (as shown in the photos) - Additional heated glue pot – ideal for quick switching between different glue colors Carefully maintained, lightly used, and fully operational – ready to be put straight into production. The machine is available due to factory restructuring. Dkodpfx Aley Dg N Ts Aeu Contact us for more details or to arrange a viewing.

Condition: like new (used), functionality: fully functional, planing width: 430 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, total length of planing tables: 2,900 mm, Equipment: CE marking, SAC FS 430 PLANER | SCM jointer planer with electric table adjustment | 430 MM! 4 TERSA knives! Professional planer from the Italian brand SAC, model FS 430. The machine is designed for precise surfacing and edge planing of wooden components. Its robust, heavy-duty construction and wide 430 mm working table make it ideal for use in both woodworking shops and for the production of furniture, doors, windows, and solid wood elements. Electric table adjustment allows for quick and convenient machine setup changes without the need for manual table lifting. The controls are located on a separate, easy-to-read operator panel. TECHNICAL SPECIFICATIONS: - Manufacturer: SAC - Model: FS 430 - Type: Planer - Planing width: 430 mm - Shaft: 4-knife TERSA - Shaft diameter: approx. 120 mm - Table adjustment: electric - Adjustment control: from the control panel - Table length: 2900 mm - Fence: cast iron, adjustable angle - Shaft guard: YES - Noise reduction combs: YES - Power supply: 400 V Dsdpfx Aozx Alkel Aeku Machine testing on-site is possible. Financing options are available through leasing or installment plans. WE ORGANIZE TRANSPORT We have the following machines available: band saws, circular saws, crosscut saws and miter saws, thickness planers, jointers, sanders, horizontal and vertical drilling machines, feed systems, sharpeners, four-sided planer, four-sided, three-sided, two-sided, thicknesser, jointer, sander, planer, jointer-planer, planer-thicknesser, jointer-thicknesser, thicknesser-jointer, cleaning machine, mortiser, drilling machine, parquet machine, trimming machine, lathe, milling machine, spindle molder, top spindle, bottom spindle, sanders, wide belt sander, throughfeed sander, roller sander, disc sander, angle sander, jointer, drill, drilling machines, horizontal, radial, milling machine, multi-spindle, edge banding machines, edge bander, veneer machine, press, presses, lathes, band saws, briquetting machines, briquetting machine, chippers, chipper, wood chipper, dowel machine, dowel machines, mortiser, mortising machine, dust extraction, dust collectors, exhaust fan, fans, sharpener, sharpeners, compressor, compressors, honing machines, multi-function

Condition: like new (used), functionality: fully functional, planing width: 400 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 5,000 rpm, Griggio PF 400 Planer! Small, 4-knife, stable! SUPER Manufacturer! Italian, in excellent condition! Griggio PF 400 Planer! Small, 4-knife, stable! SUPER Manufacturer! Perfect condition! TECHNICAL SPECIFICATIONS: - Table length 2500 mm - Working width 400 mm - 4 traditional knives - 3kW motor - Shaft RPM 5000 - Shaft diameter 120mm - Both tables adjustable - Stable, solid fence - Shaft noise reduction system Machine dimensions: - Length 250 cm Dodpfjzx A Ncjx Al Aoku - Width 70 cm - Height 100 cm - Weight 550 kg WE ORGANIZE TRANSPORT WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl We have the following machines: band saws, circular saws, crosscut and miter saws, thicknessers, planers, sanders, horizontal and vertical drilling machines, feed systems, sharpening machines, four-sided planer, 4-sided, 3-sided, three-sided, two-sided, thicknesser, planer, sander, jointer, planer-jointer, planer-thicknesser, jointer-thicknesser, cleaning machine, mortiser, dowel machine, parquet machine, trimming machine, rounding machine, for log homes, milling machine, milling machines, spindle down, spindle up, top, bottom, sanders, wide belt, narrow belt, throughfeed, cylindrical, disc, angle, planer, drill, drills, horizontal, radial, milling machine, multi-spindle, edge banders, edge banding machine, veneer machine, press, presses, lathes, log splitters, briquetting machines, briquette machine, chippers, chipper, wood chipper, boring machine, boring machines, dust extraction, dust collectors, extractor, extractors, fan, fans, sharpener, sharpeners, compressor, compressors, sharpening machines, multi-functional.

Condition: used, Single-column hydraulic press, DUNKES Type HZT 2.5 Machine No. H94-2558, Year of manufacture 1994 Clamping force 2.5 tons Overhang 180 mm Table surface 420 x 300 mm Through-hole in the table 60 x 185 mm Ram surface Ø 40 mm Dowel hole for clamping Ø 20 mm Ram stroke 160 mm Maximum installation height 250 mm Rapid traverse downward 65 mm/sec Rapid traverse upward 160 mm/sec Working speed 8.3 mm/sec Table height above floor 950 mm Hydraulic operating pressure 135 bar Hydraulic tank capacity approx. 100 liters Drive power 1.5 kW Power connection 400 volts, 50 Hz - Installation height can be increased by shortening the piston rod by 80 mm - Pressure and stroke limitation - 2-hand operation on the machine Dkedpfxsh Uhqye Al Aou - Stroke counter - Safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual insertion operations) - 32047 operating hours recorded - Electrical wiring diagram and hydraulic diagram available Space requirement L x W x H 1100 x 980 x 1950 mm Weight 700 kg Very good condition

Year of construction: 1987, condition: ready for operation (used), 5 metalworking machines from various manufacturers are offered. 1) Column drilling machine VEB BS16, year of manufacture: 1960, weight: 110kg. 2) Milling machine Fritz Werner. 3) Pillar drilling machine Infratirea 4GC02502, year of manufacture: 1987. 4) Pillar drilling machine Infratirea, year of manufacture: 1987. 5) Radial drilling machine Tianjin No. 4 Z3063×20. Dodozqfxdopfx Al Aeku

Condition: used, Year of construction: 2002, Temperature range 140 °C heating capacity 8,0 kW Cooling capacity 30 kW range L-W-H 0,70x0,20x0,50 m Dsdszu Tgdopfx Al Asku weight of the machine ca. 48 kg HB-Therm HB-140 U1 Series 4 Temperature Control Unit – Water up to 140°C --> Definition and structure

Condition: ready for operation (used), Year of construction: 2025, operating hours: 1,351 h, controller manufacturer: FANUC, controller model: i Series iPlus, This 6-axis DN Solutions DNX 2100S Advanced was manufactured in 2025. It features a FANUC i-Series control, a 6-axis configuration including B and C axes, and a tool magazine with 60 positions. The machine offers full turn-mill capabilities, through-spindle coolant up to 70 bar, and a Renishaw probing system. Consider the opportunity to buy this DN Solutions DNX 2100S turn-mill centre. Contact us for more information about this machine. • Axes Configuration: 6 axes (X, Y, Z, B, C1, C2) • B-axis milling spindle (indexing accuracy 0.0001°) • Milling/Main Spindle: • Tool Interface: HSK-C63 • Max Speed: 12000 rpm • Power: 18.5 / 15 kW • Max Torque: 58 Nm • B-axis Travel: 240° (±120°) • Left Spindle: • Chuck Size: Ø255 mm (10") • Max Speed: 4000 rpm • Power: 22 / 15 kW • Max Torque: 456 Nm • Right (Sub) Spindle: • Chuck Size: Ø210 mm (8") Dksdpfszv Ruusx Al Aeu • Max Speed: 5000 rpm • Power: 18.5 / 15 kW • Max Torque: 326 Nm • Tool Magazine: 60 positions • Features: Driven tools, Full turn-mill capability • Through-Spindle Coolant: 70 bar • Programmable Coolant Pressure (7 steps) • Coolant Through Opposite Spindle • Oil Skimmer • Chuck Washing • Work Area Washing: 4.5 bar • Coolant Level and Pressure Monitoring • Oil Mist Collector Preparation • Hinged Belt Chip Conveyor • Renishaw Probing System (Measuring Head Included) • Automatic Tool Measurement • Radio Tool Measurement System RMP60 • Manual Pulse Generator (MPG) • 3-Color Signal Tower

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, planing width: 500 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 4,700 rpm, total length of planing tables: 800 mm, total width: 920 mm, total height: 1,140 mm, overall weight: 450 kg, VEBA S500 PLANER | 500 MM | 4 KNIVES | 4.3 kW | 2009 | ITALY | Professional VEBA S500 planer/thicknesser from the renowned Italian company VEBA Meccanica S.r.l. This machine is designed for the precise planing of wooden components to a specific thickness. Its robust, compact design and 4-knife cutterblock make it ideal for use in both carpentry workshops and for the production of solid wood components. Made in Italy, this machine is used and ready for operation. KEY FEATURES: - Renowned Italian brand VEBA - Model S500 - Planing width of 500 mm - 4-knife cutterblock - Traditional knives - Robust construction - 2 feed speeds - Material height range up to approx. 240 mm - Maximum planing depth of 8 mm - Table height adjustment - 2 rollers in the table to facilitate material feed Dkedpfsz A A Iwsx Al Aju - Machine equipped with CE marking - Year of manufacture 2009 TECHNICAL DATA: - Planing width: 500 mm - Work table dimensions: approx. 500 × 800 mm - Material height range: approx. 4–240 mm - Maximum planing depth: 8 mm - Planing cutterblock: Ø 110 mm - Number of knives: 4 pcs - Type of knives: traditional - Cutterblock rotational speed: approx. 4700 rpm - Feed speed: 6.5 / 13 m/min - Table rollers: 2 pcs - Height adjustment: electric and mechanical MOTOR / POWER SUPPLY: Motor power: 4.3 kW Voltage: 400 V Power supply: 3 phases DIMENSIONS AND WEIGHT: Machine dimensions: approx. 1000 × 920 × 1140 mm Weight: 450 kg – according to the nameplate We invite you to test the machine on-site. Financing options available through leasing or installment plans. WE ORGANIZE TRANSPORT.

Condition: good (used), mileage: 607,315 km, power: 316 kW (429.64 HP), first registration: 12/2019, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 6x2, wheelbase: 4,500 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 9,600 mm, total width: 2,550 mm, total height: 3,460 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking air conditioner, parking heater, power mirror, retarder, seat heater, traction control, - Heated mirrors - Digital tachograph - Recording device (control unit) - Fixed - Halogen lamp - High roof - Alloy wheels - Manual - Auxiliary drive Djdpozvmpzofx Al Aeku - Radio/cassette - Lane keeping assist - Fabric - Auxiliary braking system Number of axles: 3, Configuration: 6x2, Unladen weight: 9265 kg, Gross vehicle weight: 26000 kg, Total tank capacity: 390 liters, Fifth wheel coupling: Fixed, Number of locks: 1, Winch pulling capacity: 1 ton, Alloy wheels, Type of cab: High roof, Cruise control, Recording device (control unit), Digital tachograph, Air conditioning, Auxiliary air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Lighting type: Halogen lamp, Lane keeping assist, Climate control, Seat heating, Engine power: 316 kW (424 hp), Engine displacement: 12419 cc, Fuel: Diesel, Euro: 6, Transmission type: AS-Tronic, Transmission type: ZF, Gears: 12, Auxiliary braking system, Retarder brand: Intarder, Power steering, ABS, ASR, Auxiliary drive, System length: 50 cm, System type: ., Central locking, Seat arrangement: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual, 6X2-4 LAST AXLE STEERING // ADR // PTO // INTARDER Transmission Transmission: ZF, 12 gears, Automatic Axle Configuration Tire size: 315/70R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Steered; Tire tread depth left: 9 mm; Tire tread depth right: 10 mm Axle 2: Double tires; Tire tread depth left inner: 16 mm; Tire tread depth left outer: 16 mm; Tire tread depth right inner: 10 mm; Tire tread depth right outer: 11 mm Axle 3: Lift axle; Steered; Tire tread depth left: 13 mm; Tire tread depth right: 7 mm Weights Unladen weight: 9,265 kg Payload: 16,735 kg GVW: 26,000 kg Functional Loading platform height: 114 cm Maintenance APK (Technical Inspection): valid until 12/2026 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Financial Information Leasing price: 477 € per month (default, 60 months); Ask for more information and conditions Identification License plate: KLEYN1 Kleyn Trucks is one of the largest independent used vehicle dealers in the world. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Calculate your leasing rate quickly and send an inquiry via our website. Ask directly about our European warranty package.

Condition: new, FESTO Multi-position cylinder Djdpfx Ajzm Ipqsl Aoku ADNM-40-A-P-A-60Z1-108Z2-162Z3

Condition: used, empty load weight: 8,850 kg, maximum load weight: 31,150 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 08/2019, suspension: steel, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Total loading platform length approx. 9,500 mm, lowbed loading platform length approx. 7,360 mm, loading height approx. 910 mm, 14 pairs of lashing eyes. Vehicle is offered on behalf of the customer. -- Subject to errors, misprints, and changes. Sample images -- More data at: !, More Details: ! Dedpfx Aloz Nv I Ss Asku

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: ab/174978, overall weight: 2,950 kg, total height: 1,650 mm, total width: 1,700 mm, rotational speed (max.): 6,000 rpm, planing width: 230 mm, input voltage: 380 V, number of blades: 4, total length of planing tables: 4,700 mm, type of input current: three-phase, year of last overhaul: 2023, actuation type: electric, Equipment: CE marking, documentation/manual, four-sided planer SCM Superset XL Comp 6 documentation available, minimum/maximum planing dimensions width 25 to 230 minimum/maximum planing dimensions height 6 to 120 1x planing spindle 10 hp, sanding spindle 10 hp, width spindle 10 hp, thickness spindle 15 hp, additional spindle 10 hp, universal spindle 10 hp including planing heads/quick-change system, infeed table 2500, automatic height and width adjustment, with memory capacity for 99 programs Dkjdpezwf Eksfx Al Aeu manual central lubrication system, Waxelite pump, including dust extraction pipes up to and including automatic sliding dust collector year of manufacture 2005, machine available for pick-up, currently available, price €17,500 excluding VAT

Condition: ready for operation (used), Bosch DM 15K 1101-D servo drive No. 1070080954-205 SN:002997639, professionally fully overhauled and tested with a 12-month warranty, 100% functional, delivery as per photos. The agreed sales discounts do not apply to this item. Please request the price separately! Dksdpfjx Eqxusx Al Aju

Condition: new, Rexroth MDD112D-N-030-N2L-130GA2 Synchronous PM motor MNR R911264119 SN 7162518000339 FD 15W07, unused, with signs of storage, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Dedpjngh Enjfx Al Aoku