Used Cormak Q12E30 for sale (504)

Condition: new, Year of construction: 2026, The CORMAK HBS260 metal bandsaw for cutting pipes, profiles and bars is widely used in locksmith and metalworking workshops where precision, quality and cutting speed are essential. The model features a pivoting arm from 0° to 60°. The frame design ensures precise and quiet operation. It has a removable chip tray for easy cleaning! Machine characteristics The CORMAK HBS260 horizontal metal bandsaw with a pivoting arm enables cutting perpendicular to the material axis and at any angle within the range of 0° to 60°. The material can be fed manually or by any mechanical device, while the tool feed operates automatically. The blade guides are fitted with special carbide plates and bearings, which have a significant influence on the blade’s guidance, service life, straightness, accuracy and cutting quality. The carbide guidance system greatly reduces machine and blade wear. The machine is equipped with an efficient coolant pump with a closed coolant circulation system. The saw arm is made from a single cast-iron element, and with the use of a 27 mm wide cutting blade, it enables series cutting of both profiles and solid materials. The vice is mounted on an adjustable base and features a quick-clamping system. The blade guides are fitted with hard metal (carbide) plates and rolling bearing systems. These carbide guides are responsible for the cutting precision and straightness. The upper part of the base is shaped as a tray for draining coolant and collecting chips generated during the cutting process. The base is fitted with a cast-iron worktable with a pivoting arm and a control panel mounted on a separate arm. In the cutting process, the main cutting motion is the movement of the cutting blade, while the feed is achieved by lowering the arm. The arm lowering speed (cutting speed) is controlled by a hydraulic cylinder. The feed rate is regulated via the saw’s control panel. Two blade speeds are available: 35 and 70 m/min. When the arm reaches its lower position (after the cut), the drive to the cutting blade is automatically switched off. Safety is ensured by blade guards and micro-switches that stop the motor after the cutting cycle or when any guard is opened. Additional protection automatically switches off the bandsaw in the event of blade breakage. Blade size [mm] 2520 x 27 x 0.9 Blade tension mechanical (manual) Blade speeds [m/min] 35, 70 Arm lowering control stepless – hydraulic cylinder Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame swivel [°] 0–60 Power supply 3-phase 400V Main motor power [kW] 1.1 / 1.5 Coolant pump motor power [kW] 0.05 Dimensions with base [cm] 150 x 80 x 140 Lajdpfx Ajudi Uzobzjg Weight [kg] gross/net – 210 / 180 kg Additionally 2 M42 saw blades 5L Emulsol ZW580 magnetic chip collector

Condition: new, Year of construction: 2026, Machine Characteristics Heavy, Stable Cast Iron Body: A solid structure based on a heavy cast-iron frame ensures stability and durability, even during intensive use. Milling Height Adjustment on the Support: A unique height adjustment system located on the support, rather than on the column, allows the machine to be adapted to various applications. Massive Cross Table for Milling/Drilling: The large, precisely ground table surface provides a solid base for a wide range of projects. Dovetail Guides: Innovative dovetail-shaped guides ensure smooth movement along all three axes, resulting in excellent machining precision. Quiet Operation Thanks to Ground Gears: Ground gears ensure quiet operation, improving working comfort in the workshop. Left and Right Spindle Rotation: Operate the tool in both directions to suit different tasks. Tiltable Head (+/- 90°) and Adjustable Head Height: Flexible angle adjustments and head-height control provide full machining versatility. Digital Longitudinal and Cross Readouts Additional Options, Additional Benefits The ZX 7045E DRO version is available immediately from stock, and you also receive a free accessory set: Drill chuck Reducing sleeve MK4/MK3 Reducing sleeve MK3/MK2 ZX 7045E DRO Milling-Drilling Machine The ZX 7045E DRO is a high-precision, advanced machine tool designed for reliable metalworking performance. Equipped with digital readout systems (DRO) and a robust construction, it enables accurate milling and drilling across a wide range of materials. Thanks to its versatility and reliability, the ZX 7045E DRO is an ideal solution for professional workshops, meeting the demands of even the most complex machining applications. (The base is available as an optional accessory.) Technical Specifications Maximum drilling diameter: 45 mm Maximum face mill diameter: 80 mm Maximum end mill diameter: 28 mm Maximum thread diameter: 12 mm Spindle quill travel: 100 mm Spindle taper: MT4 Spindle speeds (6 speeds): 95, 170, 280, 540, 960, 1600 rpm Maximum distance spindle nose–table: 460 mm X / Y / Z travel: 500 / 210 / 425 mm Distance spindle–column surface: 245 mm Worktable dimensions: 730 × 210 mm Base dimensions: 400 × 600 mm Motor (S1/S6): 1500 W / 2100 W, 400 V Machine dimensions (with base): 1080 × 770 × 1460 mm Ledjx Dkr Nopfx Abzjag Weight: 278 kg Included Equipment 2-axis digital readout MK3/B18 drill chuck arbor Hand tools 3–16 mm drill chuck (B18) Reducing sleeve MK4/MK3 Reducing sleeve MK3/MK2 User manual

Condition: new, functionality: fully functional, Year of construction: 2026, Electromechanical Plate Rolling Machine ESR 1300 × 1.5 mm with Asymmetric Rolls The ESR 1300 × 1.5 mm electromechanical plate rolling machine with asymmetric rolls is designed for manufacturing cylindrical and conical shells with various diameters. The machine is intended for bending metal sheets with a maximum thickness of 1.5 mm and a working length of up to 1300 mm. The upper roll diameter is 75 mm. Three-roll bending machines from this series are highly popular due to their simple yet functional construction, offering reliable operation and versatility for light-duty metal forming applications. Machine Features Asymmetric roll arrangement for easier sheet positioning and efficient bending. Upper and lower rolls driven by an electric motor through a gear system and chain transmission. Lasdsrh E Iuepfx Abzjg Upper and lower rolls rotating in both directions for convenient operation and improved control of the bending process. Height-adjustable lower and side rolls with manual adjustment. Cone bending capability for producing tapered components. Foot pedal control unit with an emergency stop button for safe and convenient operation. Construction and Technology The machine uses a reliable chain drive system to transfer rotation from the electric motor to the rolls. The asymmetric roll configuration improves the ease of inserting and positioning the sheet before bending. The manually adjustable lower and side rolls allow precise setting of the bending parameters, while the reversible roll rotation ensures comfortable and efficient operation. Technical Specifications Parameter Value Model ESR 1300 × 1.5 mm Maximum working width 1300 mm Maximum material thickness 1.5 mm Roll diameter 75 mm Motor power 0.75 kW Dimensions (L × W × H) 1710 × 500 × 1100 mm Weight Approx. 340 kg (±2%) Standard Equipment Foot pedal control unit User manual CE Declaration of Conformity Manufacturer: CORMAK

Condition: new, Year of construction: 2026, CORMAK STU75 Metal Belt Grinder The CORMAK STU75 Metal Belt Grinder is an industrial belt grinding machine designed for a wide range of metal finishing applications, including surface grinding, edge finishing, and processing cylindrical components such as pipes and tubes. Thanks to its powerful motor, two-speed belt operation, and carefully engineered working system, the STU75 provides high efficiency, precision, and reliability for everyday industrial use. Key Features Adjustable belt speed: 14.5 / 29 m/s – allows the grinding speed to be matched to the material type and required surface finish quality. Quick belt and abrasive tool replacement – reduces setup times and improves workstation productivity. Grinding head adjustable for vertical and horizontal operation – provides excellent flexibility and enables machining of various workpieces at the optimal angle. Pipe vise with 0–30° angle adjustment – allows precise angled grinding of cylindrical components, ideal for pipe preparation before welding. Complete set of pipe rollers for different diameters – enables quick setup for grinding pipes with diameters up to 60.3 mm. Heavy-duty vibration-damping construction – improves grinding accuracy and operator comfort during extended operation. Construction and Technology The CORMAK STU75 belt grinder has been designed for versatile operation in demanding industrial environments. Equipped with a Ø200 mm rubber-coated drive wheel and a 120 × 90 mm sliding support with rollers, the machine ensures smooth belt guidance and consistent contact between the abrasive belt and the workpiece. The integrated roller guidance system combined with a spring-loaded belt tensioning mechanism provides safe, stable, and smooth operation of the sanding belt. The rigid construction minimizes vibration, improving both machining accuracy and working comfort. Precision and Performance The combination of a wide 75 × 2000 mm abrasive belt and two selectable grinding speeds ensures excellent performance for both heavy stock removal and fine finishing operations. The adjustable pipe vise and dedicated roller set enable precise tube grinding with repeatable results and stable workpiece positioning. Applications The universal CORMAK STU75 Metal Belt Grinder is suitable for: Manufacturing handrails, balustrades, and steel pipe structures Edge and surface preparation before welding or painting Metalworking departments, tool rooms, and industrial service workshops Small and medium-sized production lines Standard Equipment Ø200 mm rubber-coated drive wheel Sliding support with 120 × 90 mm rollers Pipe grinding vise with 0–30° angle adjustment Roller set for pipe diameters: 20 mm 21.3 mm 26.9 mm 33.7 mm 42.4 mm 48.3 mm 60.3 mm Abrasive belt 75 × 2000 mm Lajdpfxjvu Ukzo Abzeg Technical Specifications Belt speed 14.5 / 29 m/s Abrasive belt dimensions 75 × 2000 mm Power supply 400 V Motor power 2.2 kW Weight 110 kg Maximum pipe grinding diameter 60.3 mm

Condition: new, Year of construction: 2026, CORMAK ZS-40B Industrial Pillar Drill The CORMAK ZS-40B is a technologically advanced industrial pillar drilling machine designed for intensive metalworking applications in workshops and production facilities. Equipped with a precision oil-bath gearbox, automatic vertical feed, and tapping functionality, the CORMAK ZS-40B metal drill press delivers reliability, efficiency, and outstanding drilling and threading performance. Key Advantages Automatic vertical feed – three feed rates (0.12, 0.18, and 0.25 mm/rev) allow optimal adjustment of cutting parameters to suit different materials. Tapping function with automatic spindle reversal – enables efficient internal thread cutting up to M32 without operator intervention. Ljdpfx Asridv Sjbzsag Oil-bath gearbox with hardened and ground gears – ensures smooth, quiet operation and long service life of the drive system. Rigid 115 mm diameter column – minimizes deflection and vibration, resulting in higher machining accuracy. Large rotating worktable with height adjustment – allows machining of large and irregularly shaped workpieces. Integrated cooling system as standard – improves drilling quality, extends tool life, and reduces the risk of overheating. Construction and Technology The CORMAK ZS-40B industrial drill press is engineered for continuous operation in demanding production environments. At its core is a mechanically driven gearbox lubricated in an oil bath, providing stable and reliable power transmission. The MT4 spindle taper accommodates a wide range of drilling and tapping tools, while the high rigidity of the spindle head and column assembly ensures precise hole machining. A transparent plexiglass chuck guard enhances operator safety while maintaining full visibility of the machining area. Precision and Productivity The automatic feed system enables repetitive drilling operations without operator fatigue, significantly improving productivity in serial production. The spindle speed range from 95 to 1600 rpm, combined with six gearbox speeds, allows precise adjustment of machining parameters to match the material and tooling requirements. A precision handwheel with depth scale provides accurate control over drilling depth. Applications The CORMAK ZS-40B drill press with tapping function is an ideal solution for: Manufacturing and assembly plants Mechanical and metalworking workshops Maintenance departments Tool rooms and training centers Standard Equipment 16 mm drill chuck MT4 arbor MT3 and MT2 reducing sleeves Drift key for arbor removal Worktable with mounting T-slots Handwheel with depth scale for drilling depth control Cooling system with pump Plexiglass spindle guard Handwheel with graduated scale Technical Specifications Parameter Value Maximum drilling capacity 40 mm Maximum tapping capacity M32 Spindle taper MT4 Column diameter 115 mm Distance from spindle axis to column 260 mm Maximum spindle-to-table distance 754 mm Maximum spindle-to-base distance 1270 mm Spindle speed range 95–1600 rpm Number of speeds 6 Automatic feed rates 0.12 / 0.18 / 0.25 mm/rev Worktable dimensions 354 × 575 mm Overall height 2120 mm Motor power 1.1 kW (S1) / 1.6 kW (S6) Power supply 400 V / 50 Hz Weight 410 kg

Condition: new, Year of construction: 2026, The CORMAK Q15E16-2 electric stacker is a compact warehouse machine designed for transporting, lifting, and handling loads weighing up to 1,500 kg. Its maximum lifting height of 1,600 mm enables efficient pallet handling, loading and unloading of goods, and placing loads on low-level racks and platforms. The stacker is operator-controlled and equipped with electric drive and lifting systems, reducing physical effort and increasing the efficiency of daily material-handling operations. Its compact dimensions, overall width of 780 mm, and turning radius of 1,350 mm make it easy to maneuver in warehouses, production halls, and other areas with limited space. Key advantages of the Q15E16-2 stacker 1,500 kg load capacity – enables handling of heavier pallets and warehouse loads. 1,600 mm lifting height – suitable for loading, unloading, and placing goods on elevated surfaces and lower rack levels. Electric drive – the 0.75 kW motor improves load transport and reduces operator effort. Electric lifting – the 2.2 kW lifting motor ensures efficient load handling. Compact design – the 780 mm width and 1,350 mm turning radius facilitate operation in narrow aisles. 2 × 12 V / 85 Ah batteries – provide power for the electric drive and lifting systems. Polyurethane wheels – well suited for typical warehouse and industrial floors. Electromagnetic brake – supports safe stopping and control of the stacker during operation. 1,150 mm forks – designed for standard pallet-handling and transport operations. Efficient warehouse operation The CORMAK Q15E16-2 is designed for everyday internal material transport. Its 1,500 kg load capacity combined with a 500 mm load center allows efficient handling of loads while maintaining the machine's compact dimensions. The travel speed is 3.5 km/h with a load and 4 km/h without a load, making the stacker suitable both for precise maneuvering and for transporting goods between workstations. The Q15E16-2 uses two independent drive systems: 0.75 kW travel motor, 2.2 kW lifting motor. Equipment and key components electric drive system, electric lifting system, 1,150 mm forks, 2 × 12 V / 85 Ah batteries, polyurethane wheels, electromagnetic braking system, mast with a maximum lifting height of 1,600 mm. Technical specifications Parameter Specification Maximum lifting height 1,600 mm Load capacity 1,500 kg Load center 500 mm Fork length 1,150 mm Outer fork width 560 mm Height with forks lowered 2,090 mm Height with mast raised 2,090 mm Minimum fork height 80 mm Overall width 780 mm Overall length 1,770 mm Ground clearance 20 mm Turning radius 1,350 mm Travel speed with / without load 3.5 / 4 km/h Lifting speed with / without load 85 / 110 mm/s Lowering speed with / without load Not specified Gradeability with / without load 3 / 10% Service brake type Electromagnetic Drive motor power 0.75 kW Lifting motor power 2.2 kW Battery capacity 12 V / 85 Ah, 2 pcs. Wheel material Polyurethane Weight 390 kg Lajdpfx Aozu I Ngobzsg

Condition: new, Year of construction: 2026, LUFT 1500 INVERTER Screw Compressor The LUFT 1500 INVERTER screw compressor combines state-of-the-art pneumatic technology with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Are you looking for a professional solution for powering pneumatic tools in a workshop, paint shop or production line? The CORMAK LUFT 1500 INVERTER screw compressor is an excellent choice. With an 11 kW motor and an impressive actual output of up to 990 l/min, it provides a continuous supply of compressed air required for efficient operation of impact wrenches, blow guns and painting tools. This model has been designed for continuous-duty operation, making it ideal for demanding applications such as tyre service centres, large automotive workshops and manufacturing facilities. Investing in a CORMAK screw compressor means a significant improvement in working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The LUFT 1500 INVERTER features a direct-drive system, providing significantly higher efficiency and lower power losses compared with belt-driven models. This innovative solution ensures optimal utilisation of the motor's power, resulting in higher performance and lower energy consumption. Laedpfxexnxzae Abzeg The maximum operating pressure generated by this screw compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM electronic control panel, giving the operator access to key compressor information and greater flexibility and control over the production process. Key Parameters ✅ Pressure: up to 10 bar ✅ Air output: up to 1,580 l/min ✅ Motor power: 11 kW Technical Specifications Parameter Specification Motor power 11 kW Voltage 400 V / 50 Hz Output at 0–6 bar 1,620 l/min Output at 6 bar 1,580 l/min Output at 8 bar 1,350 l/min Output at 10 bar 1,230 l/min Outlet connection diameter (G) 1" Dimensions 1170 × 730 × 1020 mm Weight 243 kg Manufacturer Cormak

Condition: new, Year of construction: 2026, CORMAK BDS 6x9 Wood Sander – Versatile Belt and Disc Sander for Precision Woodworking The CORMAK BDS 6x9 wood sander is a versatile workshop machine combining the functions of a belt sander and a disc sander. Designed for precise processing of wooden and wood-based components, it is ideal for craft workshops, model-making studios, and service facilities. Thanks to its compact design and robust components, the machine provides high accuracy and flexibility for a wide range of sanding applications. Main Advantages of the Machine Combined belt and disc sander – vertical and horizontal belt operation increases the machine’s versatility. Precise angle sanding – achieved with the adjustable work table and linear angle gauge. Compact dimensions – space-saving design, ideal for smaller workshops. Stable construction – grey cast iron base minimizes vibrations and improves working accuracy. Effective dust extraction – a 60 mm dust outlet allows connection to an extraction system. Design and Technology The sander is equipped with a durable grey cast iron base, providing high rigidity and resistance to deformation. The 310 × 190 mm work table ensures stable material support, while its adjustment range of 0°–45° enables accurate bevel sanding. The graphite belt support provides smooth and consistent belt movement, resulting in excellent surface finishing quality. Precision and Work Efficiency The CORMAK BDS 6x9 delivers high sanding precision thanks to the high operating speeds of the sanding disc (23 m/s) and sanding belt (5.5 m/s). This allows efficient material removal and surface preparation before further processing or painting. The motor with a power rating of 550 W (S1) / 750 W (S6) provides optimal performance while maintaining low noise levels and efficient energy consumption. Applications The BDS 6x9 model is suitable for: Ledpfx Abovugrkszeag woodworking and craft workshops, restoration and conservation studios, model-making and handicraft applications, technical schools and training centers, repair and maintenance workshops. Standard Equipment Belt and disc sander with 230 V motor Adjustable-angle work table Linear angle gauge Graphite belt support Ø60 mm dust extraction outlet Polish-language operating manual (DTR) Optional Equipment Dust extraction system Replacement sanding belts and discs Mobile stand Technical Specifications Parameter Value Sanding belt size 1220 × 150 mm Sanding disc diameter 225 mm Work table size 310 × 190 mm Maximum sanding length 590 mm Dust extraction outlet diameter 60 mm Angle sanding range 0°–45° Belt speed 5.5 m/s Disc speed 23 m/s Motor power S1 S1: 550 W / S6: 750 W Power supply 230 V Weight 54 kg Warranty 12 months Manual (DTR) Included

Condition: new, Year of construction: 2026, LUFT screw compressor represents a modern solution in pneumatics, combining high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, and high performance ensure efficient and trouble-free operation. The LUFT 1000 stands out with its direct drive system, which delivers significantly higher efficiency and lower power losses compared to belt-driven models. This innovative solution ensures optimal use of motor power, resulting in higher output with reduced energy consumption. The compressor generates a maximum pressure of 10 bar. Full control over operating parameters is provided by an intuitive electronic control panel from the MAM series, giving access to key compressor data and increasing flexibility and process control. Technical specifications Motor power: 7.5 kW Voltage: 400 V / 50 Hz Air delivery (0–6 bar): 990 L/min Air delivery at 6 bar: 950 L/min Air delivery at 8 bar: 950 L/min Air delivery at 10 bar: 930 L/min Outlet connection diameter (G): 1/2" Dimensions: 810 × 610 × 850 mm Laedpfjy E Hpcex Abzjg Weight: 160 kg

Condition: new, Year of construction: 2026, CORMAK 400 metal lathes is a new, improved version of the popular metal processing lathes. Among other things, the tool holder cover, spindle bearing system, new digital readout have been improved. They are suitable for production plants, workshops and tool shops. They are perfect for unit and small lot production. NEW, IMPROVED MODEL !!! high-quality and reinforced spindle bearing system new guards system compliant with CE standards the latest model of digital axis reading reinforced and modernized lathe base with drawers for tools and an extendable chip tray Characteristics of the machine REINFORCED, RIBBED SURFACE OF THE LATHE'S BED PROVIDES MAXIMUM REDUCTION OF VIBRATION, ADDITIONALLY PRECISE GRINDED, HARDENED BED DIGITAL READOUT OF THE AXIS IN STANDARD EQUIPMENT LARGE SPINDLE BORE PROVIDES OPTIMUM PERFORMANCE 52 mm THE APPROPRIATE BED WIDTH ENSURES STABLE AND PRECISE WORKING CONDITIONS MACHINE EQUIPPED WITH HIGH-QUALITY AND HARDENED SPINDLE BEARING SYSTEM EFFICIENT MACHINING THANKS TO TWO AUTOMATIC FEEDS AND EQUIPMENT WITH A ROLLER AND A DRAFT BOLT HARDENED WHEELS IN THE SPINDLE GEAR ADJUSTABLE CLUTCH OVERLOADS ON THE PULL SHAFT POSSIBILITY TO MACHINE THE FULL RANGE OF THREADS WITHOUT REPLACING THE WHEELS IN THE GUITAR FEED CHOICE LOCK: THROUGH SCREW OR SHAFT THE REMOVABLE BRIDGE ENABLES THE WORKING OF ELEMENTS WITH AN INCREASED DIAMETER RETRACTABLE CHIP DRAWER AND TOOL DRAWERS FOR BETTER AND EFFICIENT WORK Technical data MAXIMUM TURNING DIAMETER 400 mm Lodpfoiz Tczox Abzeag MAXIMUM TURNING DIAMETER OVER THE BED 250 mm MAXIMUM TURNING DIAMETER IN THE SELECTION OF THE BRIDGE 520 mm TURNING LENGTH IN DEAD CENTRES 1000 mm BED WIDTH 218 mm SPINDLE END CAMLOCK D5 SPINDLE CONE MK6 SPINDLE BORE 52 mm SPINDLE ROTATION RANGE 65-1810 rpm SPINDLE SPEED NUMBER 16 ranges RANGE OF LONGITUDINAL FEED (40) 0,053 - 1,291 mm RANGE OF TRANSVERSE FEED (40) 0,011-0,276 mm THE MAXIMUM DIMENSION OF THE TOOL 20 mm x 20 mm METRIC THREAD 0,4-7 mm INCH THREAD 4-60 T.P.I. MODULAR THREAD (22) 0,4-3 mm THREAD D. P. (28) 8-84 D. P. TAILSTOCK QUILL DIAMETER 50 mm TAILSTOCK QUILL STROKE 110 mm TAILSTOCK TAPER MT4 ENGINE POWER 2,2 kW PUMP POWER 0,1 kW WEIGHT 640 kg DIMENSIONS 2000x820x1650 mm EQUIPMENT digital readout steady rest follow rest 200 mm 3-jaw chuck 200 mm 4-jaw chuck face plate 280 mm dead center MK4 x 2 reduction sleeve MK6/MK4 keys Factory new machine, under warranty For more information you can visit our web page.

Condition: new, Year of construction: 2026, functionality: fully functional, The pressure container is used in the pneumatic control system of various devices and is used to suppress the pulsation of compressed air in the system, securing the optimal mode of compressor work, partial removal of moisture and oil from compressed air, creating its reserve. Lajdov Axzmepfx Abzsg Characteristics of the 1000l pressure tank A compressed air pressure tank is a cylindrical pressure device consisting of two ellipsoidal bottoms, a jacket with nozzles and valves. Its main function is to dampen pulsations in the compressed air system, which contributes to the optimal operation of the compressor and helps to eliminate moisture and oil from the compressed air. High-quality pressure tanks are particularly suitable for difficult working conditions. Our pressure tank with a capacity of 1000 liters and a pressure of 11 bar is a solid and capacious device, ideal for storing compressed air and other gases under high pressure. It is designed to withstand high pressure and guarantee safe storage of gas. This tank is used in various industries, such as industry, construction, automotive or home workshops. It can be easily connected to an air compressor or other devices generating compressed air, providing a reliable source of gas in production processes and utility applications. With a capacity of 1000 liters, this tank allows for longer periods of operation without the need for frequent refilling. The pressure of 11 bar means that the tank is able to store gas at high pressure, which is extremely useful in applications requiring higher power. Our 11 bar 1000 L pressure tank is solidly made of high-quality materials, which guarantees its durability and safety. It also has appropriate valves and safeguards that prevent leaks and maintain a safe pressure level. What's more, our tank is supplied with complete documentation, passports, certificates and approvals, including information on the materials used in the production process. It has also passed the inspection by the Notified Body of the Office of Technical Inspection. It is marked with a nameplate with the CE symbol and the number of the Notified Body UDT. To sum up, the pressure tank with a capacity of 1000 liters and a pressure of 11 bar is a reliable device that allows the storage of compressed air or other gases at high pressure. Its versatile use makes it a permanent source of gas for various industrial or utility applications. Our offer includes a wide selection of pressure tanks of various capacities, which makes it easy to adapt the model to the specific needs of the installation in a given plant. Our tanks are made of durable steel with increased pressure resistance and covered with a properly prepared paint on both the inside and outside. Models are available for both vertical and horizontal installation, which allows for flexible adjustment to a specific situation. Our tanks are also used in pneumatic control systems for various devices. Technical data: Weight (kg) 230.00 Connections 8 Connection size 1/2", 2" Size 222.7 x 85 cm Tank capacity (l) 1000 Working pressure (bar) 11 Wall thickness (mm) 5 Diameter (mm) Ø 850 Height (mm) 2250 Manufacturer: Cormak

Condition: new, Year of construction: 2026, The CORMAK 200-litre pressure vessel with a working pressure of 11 bar is a reliable solution designed for storing compressed air in industrial plants, workshops, and pneumatic systems. Its robust steel construction, compliance with European Union directives, and UDT certification make this tank an essential component of any compressed air system. Thanks to its optimized design and high pressure resistance, the tank can serve both as a storage buffer and as an element for stabilizing compressor operating parameters. Key Advantages of the 200 L Pressure Vessel Professional pressure-rated construction – made of high-quality 4 mm thick steel, resistant to pressure and corrosion. UDT certification and CE marking – compliance with European safety and quality standards. 11 bar working pressure – suitable for most pneumatic systems, including those with higher operating requirements. High capacity – 200 litres – provides stable pneumatic system supply and reduces the frequency of compressor start-up cycles. Multiple connection ports – as many as 5 connection ports with diameters of 1", 2", and 1/2" allow flexible connection to various installations. High-quality workmanship – durable external paint coating. Space-saving vertical design – allows for efficient use of available space in the workplace. Construction and Technology – Robust Design for Demanding Applications This compressed air tank has been designed for intensive use in industrial environments. The body is made of structural steel with a 4 mm wall thickness, ensuring resistance to pressures of up to 11 bar and providing long-term durability. All welds undergo rigorous quality control, while the tank surface is protected with a coating resistant to chemical and atmospheric factors. The tank is equipped with a nameplate bearing the CE symbol and the UDT notified body number, confirming its approval for use on the Polish and European markets. The set includes complete technical documentation, a pressure vessel passport, and material certificates. Laodpfszwlpcjx Abzjg Precision and Operating Efficiency – Stable Pressure and Optimized Compressor Performance With a large 200-litre capacity, the tank acts as an air buffer, stabilizing pressure throughout the pneumatic system. This enables the smooth operation of compressed-air-powered equipment and significantly extends compressor service life by reducing the number of start/stop cycles. The vertical design allows for compact installation, which is particularly important in facilities with limited space. A properly selected compressor tank minimizes pressure drops and prevents pneumatic system overload, resulting in greater efficiency and safety throughout the installation. Standard Equipment Connection ports: 5 pcs. – diameters 1", 2", and 1/2" Nameplate with CE marking UDT notified body number Complete technical documentation and pressure vessel passport External anti-corrosion coating

Condition: new, Year of construction: 2026, The CORMAK 150-litre pressure vessel with a working pressure of 11 bar is a reliable solution designed for storing compressed air in industrial plants, workshops, and pneumatic systems. Its robust steel construction, compliance with European Union directives, and UDT certification make this tank an essential component of any compressed air system. Thanks to its optimized design and high pressure resistance, the tank can serve both as a storage buffer and as an element for stabilizing compressor operating parameters. Key Advantages of the 150 L Pressure Vessel Professional pressure-rated construction – made of high-quality 4 mm thick steel, resistant to pressure and corrosion. UDT certification and CE marking – compliance with European safety and quality standards. 11 bar working pressure – suitable for most pneumatic systems, including those with higher operating requirements. High capacity – 200 litres – provides stable pneumatic system supply and reduces the frequency of compressor start-up cycles. Multiple connection ports – as many as 5 connection ports with diameters of 1", 2", and 1/2" allow flexible connection to various installations. High-quality workmanship – durable external paint coating. Space-saving vertical design – allows for efficient use of available space in the workplace. Construction and Technology – Robust Design for Demanding Applications This compressed air tank has been designed for intensive use in industrial environments. The body is made of structural steel with a 4 mm wall thickness, ensuring resistance to pressures of up to 11 bar and providing long-term durability. All welds undergo rigorous quality control, while the tank surface is protected with a coating resistant to chemical and atmospheric factors. The tank is equipped with a nameplate bearing the CE symbol and the UDT notified body number, confirming its approval for use on the Polish and European markets. The set includes complete technical documentation, a pressure vessel passport, and material certificates. Precision and Operating Efficiency – Stable Pressure and Optimized Compressor Performance Ledpfx Aozwlm Ujbzsag With a large 150-litre capacity, the tank acts as an air buffer, stabilizing pressure throughout the pneumatic system. This enables the smooth operation of compressed-air-powered equipment and significantly extends compressor service life by reducing the number of start/stop cycles. The vertical design allows for compact installation, which is particularly important in facilities with limited space. A properly selected compressor tank minimizes pressure drops and prevents pneumatic system overload, resulting in greater efficiency and safety throughout the installation. Standard Equipment Connection ports: 5 pcs. – diameters 1", 2", and 1/2" Nameplate with CE marking UDT notified body number Complete technical documentation and pressure vessel passport External anti-corrosion coating

Condition: new, Year of construction: 2026, The CORMAK HBS321 vertical wood band saw operates in a vertical configuration, providing the operator with full control over guiding the material across the worktable. A key component is its rigid frame, which maintains the geometry of the wheel and guide system. This ensures smooth blade tracking and consistent cutting accuracy. In practice, this means a lower risk of blade drift—particularly important when cutting harder wood species or working at greater cutting heights. 350 mm Wheels and Blade Tracking Control Cast Iron Worktable and Angle Adjustments The band saw features a 545 × 400 mm worktable, providing adequate support for workpieces—essential for precise straight and angled cuts. The table tilt range of 0–45° allows for bevel cuts without the need for additional attachments. The cast iron construction effectively dampens vibrations, helping maintain stable operating parameters. Drive System and Operating Parameters This woodworking band saw is equipped with a motor rated at 1.1 kW (total power), ensuring stable performance for typical carpentry tasks such as ripping, trimming, preparing components for gluing and assembly, and contour cutting. The use of blades with widths ranging from 6–15 mm allows the operator to select the appropriate blade depending on the task—from precise curved cuts to stable straight-line cutting. Laser – Enhanced Control and Reduced Material Waste The integrated laser guide supports quick material alignment and accurate cut tracking. In practice, this reduces the need for test cuts, minimizes material waste, and makes working with detailed elements (e.g., profiled components or shaped cutouts) easier and more efficient. Precision and Work Efficiency Ljdpfx Abjyk Alijzoag In professional applications, repeatability is just as important as cutting capability. The rigid construction, stable table, and quick blade adjustment system reduce machine setup time and limit the need for corrections during subsequent processing stages (planing, sanding, fitting). As a result, the CORMAK HBS321 band saw supports smooth workflow and improves overall process efficiency. Applications The HBS321 wood band saw is designed for a wide range of woodworking and wood-based material applications, including: Cutting boards, squared timber, beams, and glued elements Trimming furniture and carpentry components Angle cutting (using the tilting table) Cutting shapes and profiled elements Workshop use in carpentry shops, craft businesses, and training facilities Technical Specifications Wheel diameter [mm]: 350 Maximum cutting height [mm]: 175 Maximum cutting width [mm]: 300 Worktable dimensions (L × W) [mm]: 500 × 400 Table tilt [°]: 0 to +45 Blade width [mm]: 6 to 15 Blade length [mm]: 2240 Blade speed [m/s]: 6 / 12 Overall dimensions (L × W × H) [mm]: 750 × 650 × 1730 Gross weight [kg]: 88 Motor power [kW]: S1 – 0.75 kW / S6 – 1.1 kW Power supply [V]: 230 Manual (DTR): Yes CE Declaration: Yes Standard Equipment On/off switch with low-voltage release Quick blade tension/release lever Precision rip fence Cutting blade 2560 × 10 TPI 6.3

Condition: new, Year of construction: 2026, The ZX 7045E 230V milling/drilling machine is a versatile tool for machining steel . It is ideal for drilling, reaming, boring, threading , milling and face milling. The machine allows precise drilling of holes in cast iron up to 45/40 mm in diameter. In addition, bolts up to M12 mm can be threaded, up to 80 mm wide can be milled and rebates up to 22 mm deep can be made. The ZX 7045E milling/drilling machine is a reliable tool ready to go! Machine characteristics Heavy Stable Cast Iron: The robust construction based on heavy cast iron ensures stability and durability of the machine even during intensive use. Milling machine height adjustable on the slide: The unique height adjustment on the slide, rather than on the column, allows the machine to be adapted to different applications. Massive Cross Table for Milling/Drilling Machine: An impressively sized table with a precision-ground surface provides a solid base for a variety of projects. Swallow Tail Shaped Guides: Innovative dovetail-shaped slides guarantee smooth movements in three axes for excellent machining results. Quiet Operation Thanks to Ground Gear Wheels: The ground gears make the machine run quietly, which contributes to comfort in the workshop. Left and Right Rotation: Rotate the tool in both directions, adapting to different tasks. Pivoting head +/- 90 degrees and Adjustable head height: Flexibility in angle setting and height adjustment allow full control over material processing. Additional Options, Additional Benefits: The ZX 7045E version is available from stock and you will also receive a kit free of charge: Drill chuck Reduction bush MK4/MK3 Reduction bush MK3/MK2 The ZX 7045E milling/drilling machine is not just a tool, it is a partner that can meet even the most demanding challenges in your workshop. Order now and experience perfect precision and performance! (Base available as an option) Technical data Maximum drilling diameter 45 mm Maximum face milling diameter 80 mm Maximum cylindrical milling cutter diameter 28 mm Maximum thread diameter 12 mm Spindle pin protrusion 100 mm Spindle taper MT4 Spindle speed (6 speeds for 1400r/min motor) 1400r/min ) 95, 170, 280, 540, 960, 1600min-1 Maximum distance from spindle nose to table 460 mm Travel in X / Y / Z axis 500 / 210 / 425 mm Distance from spindle to column surface 245 mm Work table dimensions 730x210 mm Base dimensions 400x600 mm Motor s1/s6 Lsdpfx Ajwnb T Ijbzoag 1500W/2100 W 230V Machine dimensions (height with base) 1080 x 770 x 1460 mm Weight 278 kg Available accessories MK3/B18 drill chuck shank handy tools drill chuck 3-16 mm/B18 reduction sleeve MK4/MK3 reduction sleeve MK3/MK2

Condition: new, Year of construction: 2026, Technical data Swing over bed 360 mm Swing over cross slide 150 mm Maximum turning length 750 mm Spindle speed 100–2000 rpm Spindle bore Ø 51 mm Spindle taper A2-6 Tailstock spindle taper MT5 Number of tools in the holder 8 Tools size 20×20 Tailstock spindle feed 100 mm Main motor power 3.7 kW Dimensions 1815×1300×1600 mm Weight 1300 kg Available equipment SINUMERIK 808D control system in Polish and English SIEMENS servomotors 1 live tool 3-jaw hydraulic chuck 8-position turret head soft jaw kit hydraulic tailstock Ledpfjizw E Aox Abzsag cooling system automatic gear and guide lubrication system 24V halogen lighting Polish and English manuals EC declaration The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, C6090 milling plotters are professional precision devices designed for small-sized processing of materials such as: wooden materials, chipboard, plywood, MDF, OSB, or PVC plastics, plexiglass, dibond, light metals. Training at CORMAK headquarters included in the price for each machine. Optional - the latest UCanCAM V13 software in Polish language version Drive Motors used to drive high-power machine tools provide appropriate acceleration and speed in individual directions. In the X and Y axes, high-quality toothed bars work, praised by users, which ensure high durability and precision, The Z axis is driven by a high-quality ball screw. All axes move on rail guides. The machine is equipped with a drive height sensor Spindle Brushless high-class spindle, which is characterized by durability. Liquid cooling system The spindle design uses high-quality machine bearings, characterized by very quiet operation and ensuring increased durability. Tool height measurement sensor - included. The spindle speed range is from 6000 to 24000 rpm. Software OPTIONALLY The latest UCanCAM V13 software in the Polish language version (the software provides the ability to import files from Corel, Autocad, etc. File import/export, text editor and input and many other functions) The software allows for quick and easy design of elements, which the program then converts to the so-called G-code. It is also possible to import ready-made files from other programs. The machine is equipped with a function of remembering the last G-code path (In the event of a power failure or interruption, it starts working from the last point without losing time or material.) DSP control Digital Signal Processing The DSP controller of the machine has its own processor and RAM, which ensures trouble-free operation and simple operation of the machine. The controller ensures smooth operation of the device and accuracy during processing. After a power loss, there is no need to initialize the program from scratch. The memory built into the controller allows the machine to work without having to load the program every time. Technical parameters Spindle 2.2kW / 3.0kW / s1 / s6 24000 rpm. inverter Workspace 600x900x300 mm DSP control Lodpewcd Tmsfx Abzsag Program resolution 0.001 mm Power supply 230V Weight 310 kg Machine dimensions width 1370x length 1720x height 2050 mm Table height 750 mm Linear guides Drive transmission toothed rack (Z axis - ball screw) Axis drives stepper motors UCanCAM V13 software in Polish language version (option) Equipment leveling feet, screws, keys, training cutter package, ER32 collets - 1/8 inch, 1/2 inch, and 5-6 mm Unloading and machine location on the customer's side. Power plug on the customer's side due to different sockets 16A / 32A Price is only for machine itself

Condition: new, Year of construction: 2026, LUFT 1000 COMPACT Screw Compressor with Integrated Refrigeration Air Dryer The LUFT series screw compressor from the Polish brand CORMAK represents the latest advancements in pneumatic technology, combined with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Key Features: Lsdpfx Aoxmg A Aobzsag Innovative Design Our compressors are built on advanced engineering and European manufacturing precision. The solid construction, enhanced with modern components, ensures long-lasting and reliable operation in all working conditions. Integrated Refrigeration Dryer The COMPACT version with an integrated dryer offers space-saving and comprehensive functionality in a single unit. The built-in refrigeration dryer ensures clean and dry air, protecting your system from corrosion and damage. Quiet Operation & Comfort Designed with attention to detail, our compressors operate with exceptionally low noise levels. Effective soundproofing and vibration reduction systems provide a comfortable working environment, enhancing operator focus and well-being. Smart Control System The intuitive MAM electronic control panel acts as the command center of your compressor. It allows precise monitoring of parameters, scheduling of maintenance, and quick diagnostics, ensuring system stability and protecting key components. Tailored to Your Needs We understand that every application is unique. CORMAK compressors can be configured with additional air treatment systems to perfectly match the specific requirements of your industry. Dynamic Operating Pressure Automatic pressure adjustment ensures that the compressor delivers exactly the amount of compressed air needed at any given moment, maximizing energy efficiency and minimizing losses. Sustainable Development We prioritize environmentally friendly solutions. The energy-saving technologies used in our compressors not only reduce your energy bills but also minimize environmental impact. The heat recovery option allows for maximum energy utilization. Integrated Refrigeration Dryer – Top-Level Air Quality Two-Stage Drying System: Provides effective moisture removal and protection for your pneumatic system. Variable-Speed Fan: Automatically adjusts cooling performance to match working conditions, optimizing energy consumption. Dual Filtration System: Includes a pre-filter with 3.0 µm precision for removing larger solid contaminants, and a fine filter with 0.1 µm precision that captures oil aerosols and other fine particles, ensuring the highest level of air purity. Technical Specifications Parameter Value Motor Power 7.5 kW Voltage 400V / 50Hz Air Delivery (0–6 bar) 990 L/min Air Delivery at 6 bar 950 L/min Air Delivery at 8 bar 950 L/min Air Delivery at 10 bar 930 L/min Outlet Connection Diameter (G) 3/4" Dimensions (L x W x H) 1320 x 650 x 945 mm Weight 320 kg

Condition: new, Year of construction: 2026, CORMAK PT260 400V Planer Thicknesser – Compact Professional Woodworking Machine The CORMAK PT260 400V planer thicknesser is a modern, compact workshop-class machine designed for precise processing of sawn timber. This functional combination of a surface planer and thickness planer offers high efficiency, solid construction, and versatility when working with wood materials. Thanks to its robust design, ergonomic operation, and reliable performance, this woodworking machine is an excellent solution for carpentry workshops, technical laboratories, and professional home workshops. Main advantages of the machine S6: 2.6 kW motor – high torque reserve enables efficient machining of hardwood and long-term operation without overloads. Stable 170 kg construction – cast iron precision-ground tables and rubber vibration-damping feet ensure safe operation, reduced vibration, and high-quality cutting results. Quick mode change system – simple switching between surface planer and thickness planer functions improves efficiency during varied woodworking tasks. Three-knife cutter block – Ø75 mm shaft rotating at 4000 rpm provides a smooth surface finish and minimizes the need for additional sanding after planing. Wide adjustment range – smooth adjustment of the table and fence allows precise adaptation to different types and sizes of material. Construction and technology The CORMAK PT260 400V planer thicknesser is manufactured using high-quality steel and cast iron components. The working tables (1100 × 250 mm and 600 × 248 mm) are milled and ground, ensuring a perfectly flat surface for accurate material guidance. The aluminium fence measuring 700 × 150 mm with adjustable angle from 90° to 45° allows easy machining of bevelled edges and angled surfaces. The thicknessing table is centrally guided on a rigid column, and height adjustment is carried out using a precise handwheel with a graduated scale, ensuring accurate and repeatable settings. Precision and working efficiency The CORMAK PT260 400V provides a maximum cutting depth of up to 3 mm, allowing effective removal of excess material while maintaining precise dimensional control. The 6 m/min feed speed ensures efficient operation while maintaining excellent surface quality. The Ø100 mm dust extraction outlet enables effective connection to a chip extraction system, improving operator comfort and extending the service life of cutting tools. Standard equipment Ø75 mm cutter shaft with 3 knives 250 × 30 × 3 mm Surface planer table: 1100 × 250 mm Thicknessing table: 600 × 248 mm Adjustable aluminium fence 700 × 150 mm (90°–45°) Rubber vibration-damping feet Ø100 mm dust extraction outlet Operating manual (DTR) CE Declaration of Conformity Technical specifications Parameter Specification Cutter block diameter 75 mm Cutter block speed 4000 rpm Dust extraction outlet diameter 100 mm Lajdpfjwt Axpex Abzjg Fence tilt angle 90°–45° Number of knives 3 Knife dimensions 250 × 30 × 3 mm Surface planer table dimensions 1100 × 250 mm Thicknessing table dimensions 600 × 248 mm Maximum planing width 250 mm Maximum planing depth 5 mm Maximum thicknessing cutting depth 3 mm Maximum thicknessing height 180 mm Thicknessing feed speed 6 m/min Fence dimensions 700 × 150 mm Machine dimensions (L × W) 1100 × 250 mm Weight 170 kg Motor power S1/S6 S1: 2.0 kW / S6: 2.6 kW Power supply 400 V Operating manual (DTR) Yes CE Declaration Yes

Condition: new, Year of construction: 2026, Efficient and precise CNC CORMAK C1325 BSP milling plotter, equipped with SERVO drives as standard, has a structure made of steel and cast iron, which ensures adequate rigidity and resistance to overloads arising during operation. It is designed for processing and cutting wooden materials, chipboards, MDF, OSB, plywood, PVC, plexiglass and dibond. For each machine, training is included in the price at our headquarters! Construction Welded steel rigid structure, The arms of the gate are made of hardened, thick, powder-coated sheet metal, which has increased stiffness, which translates into the quality of the processed detail. Workbench The work table was made in hybrid technology, It has T-slots for manual clamping material with dimensions of 1300 x 2500mm, Drive Engines used to drive high-power machine tools provide appropriate acceleration and speed in individual directions. The X and Y axes feature high-quality HIWIN toothed racks praised by users, which ensure high durability and precision, All axes move on rail guides. Machine equipped with tool height sensor Ledjiz A Ezspfx Abzeag Linear bearing: trapezoidal rails Spindle High quality spindle that is durable. Additionally equipped with an air cooling system The construction of the spindle uses high-quality sealed bearings, characterized by very quiet operation and guaranteeing increased durability. Tool height measurement sensor - included. Spindle speed range is 4,500 to 18,000 rpm. Tool clamping with 3 pcs ER32 collets, diameters 1/8", 1/2" and 5-6mm Software The machine is equipped with ARTCAM PRO software as standard Optional available: UCANCAM V11 CAD/CAM CNC software in Polish version The software enables quick and easy design of elements, which the program then converts into the so-called. G-code. It is also possible to import ready-made files from other programs. DSP control Digital Signal ProcessingDigital Signal Processing The DSP controller of the machine has its own processor and operating memory, which ensures trouble-free operation and simple operation of the machine. The driver ensures smooth operation of the device and accuracy in machining. There is no need to reinitialize the program after a power loss. The memory built into the controller allows the machine to work without having to load the program each time. Technical parameters Spindle 5.5kW / 18000rpm. inverter, air-cooled Workspace 1300x2500mm Maximum spindle height 350mm Control DSP Software resolution 0.001mm Software complete Power 400V Weight 980 kg Machine dimensions 2100x3100x2200mm Table height 715mm Guides linear Transfer toothed rack ATTENTION! The machine is equipped with the function of remembering the last track of the G-code. In the event of a power failure or interruption, it restarts from the last point without losing time or material. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. Check our offer on our website.

Condition: new, Year of construction: 2026, CORMAK LBM290 PRO Horizontal Wood Boring Machine – Precision and Versatility for Professional Woodworking The CORMAK LBM290 PRO is a precise and multifunctional horizontal wood boring machine designed for intensive operation in woodworking shops, furniture production facilities, and manufacturing plants. Thanks to its stable construction and extensive standard equipment, the machine ensures maximum efficiency and repeatability of drilling operations, even in the most demanding projects. Main advantages of the machine Mortising attachment – enables precise production of rectangular holes and slots. Double-sided tilting of the working unit – allows drilling at any angle within a range of 0–45°. Four-position spindle head – enables quick changing of drill diameters: 16, 20, 22, and 25 mm. Two end stops – ensure repeatability and accuracy during series production. Left/right spindle rotation – increases drilling versatility and allows adaptation to different types of tools. Easy one-hand operation – an ergonomic lever provides fast and comfortable control of the drilling cycle. Construction and technology The CORMAK LBM290 PRO horizontal boring machine is built on a heavy-duty grey cast iron base, which effectively absorbs vibrations and minimizes machining errors. The integrated extendable worktable (600 × 300 mm) allows convenient processing of larger workpieces. Drilling height and width adjustments are carried out using precise adjustment knobs and guide systems, ensuring smooth and accurate movement of the working unit. The machine is equipped with a professional Westcott drill chuck (0–20 mm) and a complete set of holders for square chisels. Precision and work efficiency The machine reaches spindle speeds of 1400/2800 rpm, while the maximum drilling depth is 155 mm. A stable and quiet 4.2 kW (S6) motor provides consistent performance even during long operating cycles. Horizontal wood boring machines such as the LBM290 PRO are designed for continuous industrial operation – both for individual production and large series of drilling operations for dowels, hinges, and frame joints. Applications The CORMAK LBM290 PRO horizontal boring machine is designed for: professional woodworking and furniture production facilities, manufacturers of furniture fronts and frame components, workshops specializing in furniture restoration, woodworking technical training centers. Standard equipment Mortising attachment + 1 square chisel 9.5 mm Four-position spindle head 16/20/22/25 mm Westcott drill chuck 0–20 mm Extendable and widened worktable 2 eccentric clamps Angle stop with measuring scale 4 holders for hollow chisels (shank sizes 19/20/28/30 mm) Base with tool storage compartment Left/right spindle rotation Technical specifications Parameter Value Table dimensions 570 × 300 mm Table extension 600 × 300 mm Ledpsvuq Hlefx Abzeag Drilling table height 870 mm Drilling depth 155 mm Drilling width adjustment 300 mm Height adjustment 160 mm Spindle speed 1400 / 2800 rpm Motor power (S6) 4.2 kW Power supply 400 V Two-jaw chuck 0–20 mm Dimensions 570 × 850 × 1340 mm Weight 140 kg

Condition: new, Year of construction: 2026, functionality: fully functional, Set including LUFT 700 screw compressor, N10S refrigeration air dryer. The screw compressor of the Polish brand CORMAK, the LUFT series, is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. Technical parameters LUFT 700 COMPACT Laedpfxsrh E Dis Abzsg Compressor Engine power 5.5kW Dehumidifier Engine power 0.29kW General parameters Capacity at 0-6 bar 680 lpm Capacity at 6 bar 650L/min Capacity at 8 bar 650 lpm Capacity at 10 bar 620 lpm Outlet G3/4" Overall dimensions 1250 x 600 x 895 mm Weight 380 kg Manufacturer: Cormak

Condition: new, Year of construction: 2026, The CORMAK WS32GP column drill press is an advanced metal drilling machine designed for industrial environments where high precision, reliability, and tapping capability are essential. Equipped with a cooling system, safety guards, and a 400 V drive, the machine performs exceptionally well in both serial production and toolroom applications. Key Advantages Tapping capability up to M20 – automatic spindle reverse enables efficient and safe thread cutting High torque output – 1.5 kW (400 V) motor ensures effective machining of structural and tool steel 150 mm spindle stroke – allows deep-hole drilling without repositioning the workpiece Heavy-duty construction – made of seasoned cast iron for long-term rigidity and durability 8 spindle speeds – 140–1960 rpm range enables optimal cutting parameter selection Height-adjustable 360° rotating table – flexible workpiece positioning and full accessibility Integrated gravity-fed cooling system – extends tool life and improves surface finish quality Enhanced safety features – spindle and belt drive guards with limit switches, CE compliant Design and Technology – Built for Continuous Industrial Operation The CORMAK WS32GP is manufactured from high-quality components. The head, column, table, and base are made of seasoned cast iron, ensuring resistance to vibration and deformation. The MK3 spindle and transmission components are produced from hardened and heat-treated steel for increased durability and precision. A clear control panel and ergonomic feed lever provide intuitive operation, even during extended working hours. The integrated LED work light enhances visibility in low-light working environments. Precision and Performance – Optimized for Metal Machining With a 150 mm spindle travel and a highly rigid structure, the CORMAK WS32GP ensures excellent dimensional accuracy and repeatability. Smooth motor operation and a precision gearbox enable reliable drilling and tapping performance. The large table lifting range (820 mm) and maximum spindle-to-base distance of 1235 mm allow machining of both small and large workpieces. Applications – Heavy-Duty Industrial Machine Laodpfx Aoridp Nebzjg The CORMAK WS32GP is a heavy-class industrial drill press intended for: manufacturing plants performing serial metal machining toolrooms and metal fabrication workshops maintenance departments in machinery and energy industries training centers and technical schools Standard Equipment 1.5 kW three-phase motor Forward/reverse rotation with tapping function Integrated gravity cooling system MK3 spindle with drill chuck Spindle and belt drive guards with safety limit switches Drift key for taper removal LED work light Operation manual (Polish language) CE Declaration of Conformity Technical Specifications Parameter Value Max. drilling diameter in steel 32 mm Max. tapping diameter in steel M20 Column diameter 100 mm Column wall thickness 12.7 mm Spindle stroke 150 mm Spindle–column distance 265 mm Table lifting range 820 mm Table rotation 360° Max. spindle–base distance 1235 mm Spindle taper MK3 Speed range 140–1960 rpm Number of speeds 8 Table dimensions 380 × 400 mm Base dimensions 380 × 400 mm Machine height 1900 mm Motor power 1.5 kW Power supply 400 V Net weight 310 kg Packaging dimensions 1040 × 640 × 2050 mm

Condition: new, Year of construction: 2026, The CORMAK WS32BGP column drill press is a professional metal drilling machine designed for intensive use in production plants, toolrooms, and maintenance workshops. Thanks to its precision-engineered construction, powerful motor, and integrated automatic feed and cooling systems, it ensures efficient and safe drilling and tapping of holes in steel up to 32 mm in diameter. Key Advantages Automatic spindle feed – enables precise tool guidance without operator fatigue, increasing productivity Tapping function with automatic reverse rotation – allows efficient thread cutting up to M20 in steel Large spindle stroke – 150 mm – permits deep-hole machining without interrupting the process High structural rigidity – body and column made of seasoned cast iron ensure stability even under maximum load Eight spindle speeds – wide range (140–1960 rpm) for optimal parameter selection depending on the material Integrated cooling system – extends tool life and improves machining quality Design and Technology The CORMAK WS32BGP column drill press is built around a solid 100 mm diameter column and a heavy base, ensuring excellent rigidity and operational stability. The head, column, and table are made of high-grade cast iron. The spindle runs on precision bearings and is equipped with an MK3 Morse taper. Transmission shafts are made of hardened, heat-treated steel, ensuring durability of the drive mechanism. Operator safety is enhanced by a U-type spindle guard with limit switch and a belt drive cover with safety switch, both compliant with CE standards. Precision and Performance Thanks to the automatic feed system and wide spindle speed range, the machine delivers exceptional drilling accuracy and repeatability. The high-quality control panel and integrated LED work light provide intuitive operation and comfortable working conditions, even in low-light environments. The 360° rotating table with manual height adjustment increases operational flexibility. Applications The CORMAK WS32BGP column drill press is designed for industrial metalworking applications and is suitable for: metal fabrication workshops maintenance departments toolrooms small and medium-sized manufacturing companies technical schools and training centers Standard Equipment Keyed drill chuck (MK3 Morse taper) Cooling system Drift key for taper removal Integrated LED work light CE-compliant safety guards Technical Specifications Parameter Value Max. drilling diameter in steel 32 mm Max. tapping diameter in steel M20 Column diameter 100 mm Column wall thickness 12.7 mm Spindle stroke 150 mm Spindle–column distance 265 mm Table lifting range 820 mm Table rotation 360° Max. spindle–base distance 1235 mm Spindle taper MK3 Speed range 140–1960 rpm Number of speeds 8 Table dimensions 380 × 400 mm Base dimensions 380 × 400 mm Machine height 1900 mm Main motor power 1.5 kW Feed motor power 0.12 kW Ledpfx Abjridqbozoag Power supply 400 V Net weight 310 kg Packaging dimensions 1040 × 640 × 2050 mm

Condition: new, Year of construction: 2026, The CORMAK WS32BC bench drill press is a precision column drill for metal, equipped with automatic spindle feed and a cooling system, designed for demanding drilling and tapping operations. With its 8-speed gearbox, rigid construction, and extensive equipment, it is perfectly suited for intensive industrial use. Key Advantages Automatic spindle feed with adjustable speed up to 110 mm/min – improves ease of operation and ensures repeatable machining results Integrated cooling system – protects tools from overheating and enhances machining quality Tapping function – automatic spindle reverse enables efficient thread cutting up to M24 High structural rigidity – 100 mm diameter column and heavy-duty base effectively reduce vibration 150 mm spindle stroke – allows deep drilling without interrupting the cycle 8-speed gearbox – range of 140–1960 rpm for precise parameter adjustment Enhanced safety – spindle and belt guards with limit switches, CE compliant Design and Technology The CORMAK WS32BC bench drill press is built from seasoned, precision-machined cast iron components. The spindle and transmission shafts are made of hardened steel to ensure durability and wear resistance. The MK3 Morse taper allows quick tool changes and compatibility with a wide range of drills and taps. The stable worktable, rotatable 360°, facilitates machining of workpieces with various shapes and dimensions. Precision and Performance Thanks to the automatic feed system and integrated cooling, the WS32BC ensures high hole quality and significantly reduces machining cycle times. The 1.1 kW main motor and 0.12 kW feed motor provide efficient operation even under heavy loads. The machine is ideal for drilling, reaming, and tapping in steel, cast iron, and alloy materials. Applications The CORMAK WS32BC automatic feed drill press is an excellent solution for: tool rooms and metal fabrication workshops maintenance departments manufacturing plants technical schools and training centers Standard Equipment Keyed drill chuck Drift key for taper removal Cooling system U-type spindle guard with limit switch Belt drive cover with safety switch Technical Specifications Parameter Value Max. drilling diameter (steel) 32 mm Max. tapping diameter (steel) M24 Column diameter 100 mm Column wall thickness 12.7 mm Spindle stroke 150 mm Feed speed 0–110 mm/min Spindle–column distance 265 mm Spindle–table distance 390 mm Spindle–base distance 745 mm Spindle taper MK3 Speed range 140, 250, 380, 500, 580, 850, 1250, 1960 rpm Number of speeds 8 Table dimensions 380 × 400 mm Base dimensions 645 × 470 mm Machine height 1370 mm Main motor power 1.1 kW Feed motor power 0.12 kW Power supply 400 V Net weight 230 kg Machine dimensions 900 × 500 × 1400 mm Lsdpfx Asrigaqobzoag