Used Briquette Press Bp 500A for sale (12,867)

Condition: excellent (used), total length: 3,500 mm, total width: 1,300 mm, overall weight: 7,000 kg, operating pressure: 300 bar, transport length: 4,350 mm, transport width: 1,600 mm, transport height: 2,350 mm, Simimpiantin Shelf Press for Veneering 3500×1300 Shelf length: 3500 mm Shelf width: 1300 mm Two loads Press with 8 cylinders Shelves heated with water from central heating Fgsdpfx Asxxpgbokyjh Max. working pressure: 300 bar Piston diameter: 80 mm Machine weight: 7000 kg Machine dimensions: 435×160×235 cm (H)

Condition: excellent (used), Self-loading press for gluing Orma LS/ECO/CA 30/13 Working length 3000mm Working width 1300mm Fedpfx Aksv Nhx Uoysgh Automatic material loading Glue application system Shelves heated with oil to 130C Top pressure force 57t Side pressure force 9t Year of production 2001 CE certificate

Condition: used, Year of construction: 2010, No. 3214 Feed-through veneer press Sergiani LAS Plus Fgsdpfx Aksv Sthgsyjh Used, year of construction 2010, already dismantled and stored Automatic press with continuous operation for the production of barrier doors, finished doors (veneer doors, HPL, CPL) and pre-treated parquet (2 - 3 layers). The press can be used to load the workpieces one after the other, while the pressure in the other compartments is kept constant. Up to 2 employees are required to operate the line. The multi-daylight press enables a very high production output. The pressing time is approx. 3 minutes (180 seconds) and is spread over 10 levels, which means that the press opens every 18 seconds and a new panel is processed. The press has already been dismantled and stored. The system was in operation until it was dismantled. The previous owner produced 3-layer parquet with the system. The bottom layer was inserted manually. The middle layer consists of one piece. This was glued at the top and bottom and automatically inserted into the system. The top layer was also inserted automatically. Glue spreader / glue applicator not included (optionally available) Stages: 10 Pressing force: approx. 5.5 kg/cm² Total force: 200 tons Panel size: approx. 2500 x 1300 mm LW Heating: Hot water Area of application: Production of doors, laminating, veneer and wood-based material processing High productivity with a capacity of up to 1200 doors per shift (factory specification) Vacuum loading system with 2-lane infeed roller conveyor, without gluing Scissor lift table with loading belt (belt approx. 2900 x 1000 mm LW) Vacuum stacking station with outfeed roller conveyor Space requirement for press with loading table approx. 6500 x 2365 mm LW Space requirement for entire production line approx. 25000 x 5710 mm LW Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without transportation and assembly Loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: refurbished (used), Year of construction: 1993, machine/vehicle number: 20658, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 320 t, stroke length: 250 mm, operating speed: 7 mm/s, reverse speed: 70 mm/s, table width: 250 mm, table length: 4,800 mm, table height: 980 mm, throat depth: 305 mm, ram plate length: 4,500 mm, distance table to ram: 500 mm, clearance between the columns: 3,760 mm, oil tank capacity: 350 l, total length: 6,300 mm, total width: 2,300 mm, total height: 3,475 mm, overall weight: 22,500 kg, year of last overhaul: 2026, Equipment: documentation/manual, safety light barrier, Hydraulic press brake LVD PPI 320/40 S840W Year of manufacture: 1993 Year of refurbishment: 2026 Serial number: 20658 Technical specifications: Force: 3200 kN Working length: 4500 mm Distance between uprights: 3760 mm Stroke: 250 mm Distance table – ram: 500 mm Gap: 305 mm Table width: 250 mm Approach speed: 80 mm/s Working speed: 7 mm/s Return speed: 70 mm/s Weight: 22500 kg Motor: 22 kW Oil capacity: 350 l Dimensions (L x W x H): 6300 x 2300 x 3475 mm New 2026 S840W controller • S840W: 15” touch screen – Graphic controller with free online service assistance • Axes: Y1, Y2, X, V • V: CNC crowning table • 2 front supports • Hydraulic clamping of the top tool in LVD classic 15 tool holder Tooling included: E15 H150 78° L3000mm D15 H150 78° L4500mm F15 H150 26° L4500mm H15 H150 L2500mm R15 H150 78° L4500mm Fgjdjzktg Aepfx Akysh V20 H130 30° L3500mm V20 H130 78° L3000mm V40 H130 78° L4500mm V60 H130 78° L4500mm V90 H130 78° L2500mm M130 Multi-V L4500mm (90/40/24/16/10)

Condition: good (used), Year of construction: 2002, functionality: fully functional, filter area: 48 m², filter pressure: 15 bar, pressure: 380 bar, cake thickness: 25 mm, total width: 1,500 mm, total length: 4,800 mm, total height: 1,980 mm, overall weight: 4,600 kg, number of chambers: 44, Equipment: documentation/manual, safety light barrier, For sale is a chamber filter press with the following accessories: Hydraulics, filter plates, safety devices, control system, swing plates, feed pump, press frame (steel platform), 3 cake containers for forklifts. Chamber filter press 800 Side-frame press 15 bar filtration pressure Approx. 540 liters Open filtrate discharge 800x800 PP 25mm chamber depth 44 chambers Approx. 2.5 meters useful length Length 4800 x Width 1500 x Height 1980 mm 4600 kg Price upon request. We would be happy to provide you with an individual offer. Fgjdpfx Akjzulf Sjyjh

Condition: used, Year of construction: 2006, working width: 520 mm, roll width: 520 mm, roll diameter: 1,000 mm, Equipment: documentation/manual, Video below We offer this used ETI Converting Equipment Cohesio ST 520 coater, die cutter, UV silicone coating, flexographic printing press 1 colour, , 11 magnetic cilinders, year of construction 2006. multifunctional equipment that allows self-adhesive materials and labels. linerless 1 flexo 2 hotmelt coating guns (roatating bar, lips + ‘Waterwall”) 3 unwinders Web width of 520 mm E + L webguides at the infeed and between hotmelt and UV printing unit 2 Corona treatments for two unwiders 2 cleaners Fgjdjyalqyjpfx Akysh UV Curing on 1 Flexo units (UV-Ray), which chilling rolls 2 die cutting units Chiller Working hours 9000 Year of production 2006 more information on request If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: like new (used), Year of construction: 2021, Almost New: Complete Compaction System Ludden & Mennekes SVS11+KEV 1. Stationary Screw Compactor L&M SVS 11 Virtually unused, stationary screw compactor (~1 month) designed for filling compaction containers and/or other containers. The machine is constructed from a robust, welded steel frame with continuously welded seams. Its low-maintenance screw compaction system is suitable for continuous feeding, and the compaction chamber does not require periodic cleaning. Main technical specifications Overall length: 2,480 mm Overall width: 1,660 mm Overall weight: 2,300 kg* Loading height: 1,350 mm Feed opening: 1,375 × 1,490 mm Screw diameter: 750 / 500 mm Screw speed: 17 rpm Fjdpfoz Eg Dzjx Akysgh Drive power: 11 kW Residual-current device / Fused plug Type B / 300 mA 2. Hydraulic Container Coupling/Decoupling System Hydraulically operated coupling and decoupling system with forward and reverse movement. The hooking grippers are operated manually. Designed for the secure connection of different types of compaction containers. 3. L&M KEV Cardboard Intake/Deflection and Pre-Shredding Unit Virtually unused L&M KEV coarse shredding unit for bulky cardboard packaging, cardboard tubes with cores, and other large-format packaging materials. The material is reduced to a size suitable for efficient compaction, helping to improve compactor utilization and reduce disposal costs. The unit can be installed above L&M self-compacting containers or stationary compaction systems so that shredded material falls directly into the filling opening. Main technical specifications Dimensions (L × W): 1,230 × 1,490 mm Shredding shaft width: 1,400 mm Cutting knife diameter: 585 mm Number of cutting knives: 9 Feed opening: 960 × 1,400 mm Drive power incl. power supply: 2.2 kW + 0.75 kW 4. L&M PCS 6500 Compaction Container Main technical specifications Capacity: 32 m³ Dimensions: 6,500 × 2,500 × 2,600 mm PRICE ON REQUEST

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 681852N, total length: 2,200 mm, total width: 1,450 mm, total height: 1,550 mm, Size: 360 x 520 mm Availability: in stock Total impressions: 49.7 million Estimated model year: 1983 Fgsdsz D Ernspfx Akysh Status: discontinued in 2025 Maximum sheet size: 360 x 520 mm Minimum sheet size: 105 x 180 mm Maximum speed: 8,000 sheets/hour Printing units: 2 Total weight: 2,850 kg Includes: 2 x Varn Kompac III, automatic, continuous dampening system Eltek elektrostat P22

Condition: excellent (used), Briquetting machine POR Oscar 9kW Average briquette output: 130-180 kg Briquette diameter: 70 mm Fodpoxdahysfx Akyogh Motor power: 9 kW Feeding hopper diameter: 1170 mm Technical documentation CE mark Machine weight approx. 800 kg

Condition: ready for operation (used), HSM V-Press 860 baler, year 2008–2009, price: €5,800 Pressing force: 54 kN Specific pressing force: 63.46 N/cm² Drive power: 7.5 kW Cycle time: 25 s Loading height: 1,110 mm Feed opening width x height: 1,195 x 650 mm Bale dimensions (L x W x H): 1,200 x 780 x 1,200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1,797 x 1,247 x 2,985 mm Machine weight: 2,008 kg Binding material: wire Materials processed: foil, mixed paper, cardboard, die-cut waste, textiles, Big Bags, polystyrene HSM V-Press 860 plus, year 2013–2015, price: €8,000 HSM V-Press 860 L, year 2015, price: €9,000 Fedsra Rbgjpfx Akyjgh HSM V-Press 860 plus, year 2019, price: €9,000 HSM V-Press 860 plus, year 2024, price: €10,000 HSM V-Press 860, new/ex-demo, year 2020, price: €13,000 4-fold bale wire tying Bale dimensions (L x W x H, mm): 1,200 x 800 x 1,000–1,200 Bale weight: approx. 500 kg Technical data (L x W x H, mm): 1,213 x 1,824 x 2,987 Feed opening (mm): 1,200 x 565 Cycle (s): 35 Pressing force (t): 54 Power supply (V): 400 (three-phase) HSM V-Press 860 plus B, year 2020, price: €14,000 Pressing force: 594 kN Voltage/Frequency: 400 V/50 Hz Drive power: 4 kW Feed opening width x height: 1,500 x 651 mm Bale dimensions (L x W x H): 1,500 x 780 x 1,200 mm Bale weight: 550 kg Feeding type: Manual Machine dimensions (W x D x H): 2,099 x 1,245 x 2,985 mm Machine weight: 2,336 kg Binding material: wire Material processed: foil, cardboard Idle cycle time: 25 s

Condition: used, Year of construction: 2015, functionality: fully functional, operating hours: 170 h, pressing force: 320 t, working width: 5,100 mm, degree of automation: automatic, Equipment: emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, TOSKAR press brake Pressure 320 tons Bending length 5100mm Bending length between columns 4100mm Speed of approach movement 100 mm/s Fgodpfx Ajwq Aa Ijkyeh Speed of bending movement 9 mm/s Speed of return movement 100 mm/s Opening 300 mm Distance to columns 500mm Year 2015 Only 170 working hours 5 Axes Y1, Y2, X, R, deflection arrow CNC controller with NexT touch screen

Condition: used, Year of construction: 2008, functionality: fully functional, The Bruderer BSTA 500-110B is a 500 kN Swiss-built high-speed stamping press, fitted with a BSV 75T double servo feeder for precision two-track strip feeding. Capable of up to 750 strokes per minute with B2 touch-screen control. Including sound insulating cabin. Nominal force: 500 kN (50 tons) Year of manufacture: 2008 Fgsdpfozh Nnwsx Akyjh Stroke rate: 100–750 spm (variable) Adjustable stroke: 19 / 25 / 34 / 43 / 51 / 57 / 64 mm Ram height adjustment: 64 mm Press table area: 1080 x 650 mm Control: B2, IPC-based touch-screen press control, programmable memory for fast retooling BSV 75T DOUBLE SERVO FEEDER Type: tandem dual-feed servo unit, independently controlled tracks Max. strip width: 70 mm per track Max. material thickness: 2 mm Feed length: variable, freely programmable Feed angle: variable Pilot release angle: variable No clamping/gripper bars — strip held by driven feed rollers during stamping Designed for parallel advancing of two strips or feeding pre-profiled/pre-stamped strip

Condition: used, New hose assembly machine, DAEWOO type DA5100-HC Hydraulic hose crimping press, workshop hose crimping press for crimping hose connections Serial no. 25DW06440ALE01, Year of manufacture 2025 Crimping force: 500 tons Crimping range: Ø 1/4 to 2" (15-63 mm) Maximum die opening: approx. 75 mm Pump flow rate: 6 L/min Operating capacity: 200 pieces/hour Hydraulic pressure: 315 bar Motor power: 3 kW Mains connection: 400 volts, 50 Hz - 2 operating modes: manual and automatic - Operation via buttons or foot switch - Crimping stroke adjustment via knurled screw - Short changeover times for conversion to other hose diameters - Crimping jaws are easily inserted into guides and held in place by magnetic force - 10 tool sets, crimping dies (Ø 15, 19, 23, 26, 31, 36, 41, 47, 55, 63 mm) - Cabinet base with hydraulic unit Space requirement L x W x H: 700 x 500 x 1200 mm Weight: 270 kg Fgedpfjz Afhpex Akyjh New - unused

Condition: good (used), Nagel Citoborma 480AB Paper Drill This machine is in very good condition. It has four drilling heads. Technical specifications: Drill bit distance: 45-285 mm Drill diameter: 2-20 mm Stack height: 60 mm Weight: 275 kg Automatic drilling cycle, controlled by a foot pedal and manual buttons. Sturdy construction on a pedestal. The drill table is adjustable in all planes. This is one of the newest Citoborma models. Fgsdpjz Dtaaofx Akyjh Includes operating tools, instructions, and a new cutting stick and drill bits.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, total width: 2,420 mm, total length: 6,840 mm, total height: 2,600 mm, overall weight: 15,000 kg, type of input current: three-phase, filling opening length: 2,000 mm, filling opening width: 1,980 mm, input voltage: 400 V, empty load weight: 4,950 kg, DGUV certified until: 08/2027, Presto HGS20R Container for roll-off tipper trucks 20 m³ usable volume technically refurbished repainted in desired RAL color hook lift system on both sides Fgodpfxozt Nirj Akyjh discharge door hinged at the top

Condition: used, Year of construction: 2003, MANZONI Transfer Press Type: T6302MR/2/12/TE, Year of manufacture: 2003 Fedpsz Dxitsfx Akyogh Pressing force: 6,300 kN Stroke rate: 10-45 strokes/min Stroke length: 600 mm Ram adjustment: 200 mm Table area: 4,000 x 1,700 mm Installation height: 1,100 mm Includes PBK conveyor system.

Condition: used, machine/vehicle number: 008701, Max working length: 2740 mm Max working width: 1240 mm Membrane: yes No of positions for the rolls: 2 No of work tables: 1 Fjdjzq Urtjpfx Akyjgh

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, power: 37 kW (50.31 HP), input voltage: 380 V, input current: 80 A, input frequency: 50 Hz, pressing force: 220 t, stroke length: 200 mm, operating speed: 21 mm/s, reverse speed: 200 mm/s, table width: 120 mm, table length: 4,270 mm, table height: 900 mm, throat depth: 400 mm, ram plate length: 4,270 mm, distance table to ram: 400 mm, clearance between the columns: 3,820 mm, oil tank capacity: 350 l, total length: 5,370 mm, total width: 2,160 mm, total height: 3,275 mm, overall weight: 16,950 kg, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic press brake LVD EASYFORM-10 220/4270 Touch-B Year of manufacture: 2010 Serial number: 33189 Technical specifications Force: 2200kN Working length: 4270mm Distance between uprights: 3820mm Stroke: 200mm Distance table – ram: 400mm Gap: 400mm Turbo: PP5400 Approach speed: 120mm/s Working speed: 21mm/s Return speed: 200mm/s Weight: 16950 kg Motor: 37kW Oil capacity: 350 COMMAND CONTROL TOUCH-B • Table PP8170 V-axis • EFL 90/130 • Top tool clamping PP3090 – Wila Fedpoz Eqwlefx Akyjgh • Back gauge X600 X’ R Z1 Z2 PP8096 • Safety: CE PP3580 – laser-safe • PP1115 manual front support: 2pcs • T-axis Heavy duty 200kg

Condition: new, Working width 3500 mm Working height 2300 mm Number of cylinders 4 St. Stable frame welded construction of thick-walled Special hollow profiles , sliding table and pressure beam with 50 mm hole pattern . On the left side continuous abutment for grouting the wide , lower abutment in 2 levels. Vertical pressing cylinder on specialty bar with one- quick adjustment with weight compensation in the 50 mm hole pattern adjustable in height. Long sliding table ensure the continuous recording of high jacking forces . Fast, smooth width adjustment with ball bearing Carriage with central fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and equipped with counterbalance . Lower horizontal pressing cylinders with bore for two abutments levels without weight compensation . Abutment and pressure plate depth 100 mm Machine controlled electro -hydraulic with 2 pieces vertical pressure cylinders Fgjdpfx Aed Ih H Nokyeh d = 60 mm, stroke 120 mm, single-acting, with counterbalance and One-hand height adjustment, 2 piece horizontal pressure cylinders d = 40 mm stroke, 120 mm single-acting ( 1 x with weight compensation ), 2 hand control valves , Pressure gauge, pressure regulator valve 1 of 20 to 150 bar corresponds to 550 4200 kg compression force vertically. With 3 kW three-phase motor for 400 volts , 50 Hz Operating voltage. Complete with electrical connection . Painting RAL 7035 anthracite gray with light gray RAL 7016 . (technical details according to manufacturer - without guarantee ! ) The detailed technical description can be found in the attached pdf file

Condition: used, Year of construction: 2005, power: 7 kW (9.52 HP), FOR SALE / FOR RENT: VERTICAL BALER! (Rental available in Lithuania, Latvia, Estonia, and Poland) Technical Information: Manufacturer: HSM Model: HSM 500 VL Pressing force: 54–540 kN Fsdpfsz Ehgwex Akyegh Bale size: 1200 x 800 x 1200 mm Bale weight: approx. 500 kg Max. bale size: approx. 1200 x 800 x 1200 mm (W x D x H) Press chamber dimensions: 1200 x 800 x 1520 mm (W x D x H) Motor: 7.5 kW Year of manufacture: 2005 SALE PRICE - 4400 EUR + VAT RENTAL PRICE - 160 EUR + VAT

Condition: excellent (used), Year of construction: 2023, Pressing Lines for automatic multi-(2-3)-layer parquet production. Fgodpfoggflcex Akyeh

Condition: used, Universal temperature control unit REGLOPLAS Type 90M/10/SG75/D K/RT50 Pressurized water temperature control unit with electric heating and connections for external cooling Circulating process temperature control for industrial applications in plastics processing, especially for the temperature control of injection molds and other process tools. Manufacturer's serial number: 102010170001, Year of manufacture: 2009 Temperature: max. 90°C (for water) Heat transfer medium: Water Temperature range: +20°C to 90°C Operating overpressure: max. 6 bar Pump capacity: 100 l/min Tank volume: 2.8 liters (internal filling volume) Heating capacity: 10 kW Cooling capacity of heat exchanger: up to 160 kW (depending on the external cooling unit) Fgedpfxjz Au Hbs Akysh Pump motor power: 1.5 kW Continuous sound pressure level

Condition: new, Year of construction: 2026, machine/vehicle number: ST-150, functionality: fully functional, pressing force: 150 t, stroke length: 450 mm, operating speed: 3 mm/s, reverse speed: 10 mm/s, table width: 1,500 mm, table length: 3,000 mm, table height: 750 mm, distance table to ram: 700 mm, total length: 3,000 mm, total width: 3,000 mm, total height: 2,750 mm, overall weight: 5,000 kg, Equipment: CE marking, documentation/manual, MODEL ST-150 Capacity t 150 Motor power kW 4 Working speed mm/s 2.3 Approach speed mm/s 7.4 Return speed mm/s 10 Maximum pressure bar 305 Piston stroke – J mm 450 Lower table mm 1,500 x 3,000 Head travel – C mm 1,000 Bridge travel – D mm 2,500 Front opening – A mm 1,550 Vertical opening – B mm 700 Working height – E mm 750 Overall front dimension – G mm 3,000 Overall side dimension – H mm 3,000 Overall height – I mm 2,750 Weight kg 5,000 STANDARD DESCRIPTION: We have designed motorized hydraulic presses with a movable frame and adjustable head from the ST series, offering a range of three different capacities from 80 to 150 tons. Specifically designed for straightening welded structures and plates cut with oxy-fuel or laser. Its design facilitates the loading and unloading of large volumes: parts, plates, or structures. It allows access to different pressure points without the need to move the workpiece, thanks to the lateral displacement of the cylinder and the longitudinal movement of the frame. STRUCTURE AND TABLES: The ST series hydraulic presses consist of an electrowelded structure made exclusively of S355JR steel. It is stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. Calculated and designed using finite element software. All of this guarantees our high standards of precision and quality. The longitudinal travel of the frame. CYLINDER AND HYDRAULIC UNIT: Double-acting cylinder with lapped liner, chrome-plated piston, and maintenance-free wear-resistant guides. Cylinder actuation via a lever-operated hydraulic distributor. It is equipped with a removable wiper to prevent piston damage. Fgsdpfxjy E Iq Uo Akyjh Two-speed motorized hydraulic unit with automatic disengagement of the approach speed by hydraulic pressure and a relief valve. ELECTRICAL INSTALLATION AND SAFETY: Electrical installation equipped with a motor guard with emergency stop. Supplied with a glycerin-filled pressure gauge with reading in tons and hydraulic oil. Complies with and meets all essential safety and health requirements according to CE regulations. Supplied with an instruction manual.

Condition: used, Year of construction: 2011, functionality: unexamined, machine/vehicle number: E17423-1, Avermann SSP-80 SIMPLEX stationary screw press | 11 kW | Year of construction 2011 For sale: Avermann SSP-80 SIMPLEX stationary screw press, year of construction 2011. This robust stationary screw press from Avermann is designed for the efficient compaction and transportation of various waste and material streams. The powerful screw continuously transports and compacts the material towards the connected container. The machine is heavy-duty and well-built, making it very suitable for professional use in industries such as manufacturing, logistics, recycling, and waste processing. Technical specifications: Brand: Avermann Type: SSP-80 SIMPLEX Year of construction: 2011 Serial number: E16732-1 Power supply: 400 V / 50 Hz Power: 11.0 kW Connected load: 63 A Stationary design Powerful screw drive Large feed opening Robust industrial construction Details: The machine is in good used condition. The screw and feed side are easily accessible, and the machine is equipped with an integrated electric drive and control system. A screw press has the advantage that the material is continuously fed and compacted. This makes the machine very interesting for companies with larger or constant waste streams that want to significantly reduce the volume. Inspection and testing are possible by appointment. Please feel free to contact us for more information, pricing, or technical questions. Keywords: Avermann, SSP-80, SSP 80, SIMPLEX, screw press, stationary screw press, waste compactor, waste compaction, compactor, recycling, press installation, screw compactor, Schneckenverdichter. Fedpfx Aoz Enz Iokyjgh

Condition: used, Year of construction: 2011, functionality: unexamined, machine/vehicle number: E17427-1, Avermann SSP-80 SIMPLEX stationary screw press | 11 kW | Year of construction 2011 For sale: Avermann SSP-80 SIMPLEX stationary screw press, year of construction 2011. This robust stationary screw press from Avermann is designed for the efficient compaction and transport of various waste and material streams. The powerful screw continuously transports and compacts the material towards the connected container. The machine is heavily built and very suitable for professional use in various industries, including manufacturing, logistics, recycling, and waste processing. Technical specifications: Brand: Avermann Type: SSP-80 SIMPLEX Year of construction: 2011 Serial number: E17427-1 Power supply: 400 V / 50 Hz Power: 11.0 kW Connected load: 63 A Stationary design Powerful screw drive Large feed opening Robust industrial construction Special features: The machine is in good used condition. The screw and feed side are easily accessible, and the machine is equipped with an integrated electric drive and control system. A screw press has the advantage that the material is continuously fed and compacted. This makes the machine very interesting for companies with larger or constant waste streams that want to significantly reduce the volume. Fgedpfx Ajz En A Sokyeh Inspection and testing are possible by appointment. Please feel free to contact us for more information, pricing, or technical questions. Keywords: Avermann, SSP-80, SSP 80, SIMPLEX, screw press, stationary screw press, waste compactor, waste compaction, compactor, recycling, pressing system, screw compactor, Schneckenverdichter.