Used Bookbinding Machine for sale (64,998)

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, actuation type: electric, rotational speed (max.): 3,100 rpm, rotational speed (min.): 700 rpm, total width: 1,487 mm, total length: 4,440 mm, total height: 2,793 mm, throat depth: 1,490 mm, overall weight: 1,900 kg, Equipment: CE marking, documentation/manual, NEW | YEAR 2026 | CE CERTIFIED | MADE IN POLAND | EXW €38,000 + VAT WHY THE PRIAM The Priam is a vertical, electronically controlled glass drilling machine that does most of the work for the operator. The entire feed is electronically controlled — drilling is smooth and repeatable. Ndodpfjh Ek H Ssx Ahksa The operator's role is minimal. After mounting the hole saws, they press the "Calibration" button — the machine measures the length of both drills (front and rear) and their diameter, then automatically assigns the correct spindle speed. After every drill change, the machine will not start drilling until calibration is done — setup errors are impossible. The hole position on the vertical axis is entered on the monitor and the support bar travels there automatically (up to 1,060 mm below the spindle axis); horizontally, the glass is positioned against 6 stops. The machine does the rest: the pneumatic clamp measures the glass thickness, the rear spindle pre-drills to a depth calculated by the controller, and the front spindle completes the hole from the other side — chip-free, clean edges at the first attempt. Optional: double-sided chamfering (hole saw with chamfering ring), tapered holes, and pulse drilling mode for laminated (VSG) glass. BUILT FOR SERIAL PRODUCTION Up to 20 holes on the vertical axis can be programmed — the operator enters the dimensions once and the machine drills them automatically. In serial production (shower enclosures, balustrades) the following panes are drilled without re-entering positions. Drilling at position 0 on the support bar allows holes on the glass edge (half-moon cut-outs). Performance: a Ø 75 mm hole in 4 mm glass in approx. 25–30 s (feed in glass approx. 1 mm/s, speed set by the operator). Recommended: thin-wall, self-sharpening hole saws (e.g. Champion, L=75 mm). TECHNICAL DATA Drilling diameter range: Ø 5–80 mm (both drills same diameter) Glass thickness: 2–20 mm Max. pane size: 2,000 × 4,000 mm, up to 200 kg Support bar travel: up to 1,060 mm below spindle axis Holes on the glass edge (half-moon): yes, position 0 Drilling program: up to 20 holes on the vertical axis Spindle speed: adjustable 700–2,800 RPM, assigned automatically after calibration Feed: automatic, electronically controlled Cooling: closed water circuit, approx. 30 l Compressed air: 6 bar (pneumatic clamping) Power supply: 400 V / 16 A / 4 kW Machine dimensions (L × W × H): 4,440 × 1,487 × 2,793 mm Weight: 1,900 kg Scope of delivery: CE marking, documentation, operating manual MANUFACTURER, SERVICE, TERMS EXPOGLASS is a Polish manufacturer of glass processing machinery — built at our own factory in Nysa (in-house welding shop and powder coating). Service with online support; spare and wear parts available from stock. Delivery and commissioning across the EU, operator training on site. Delivery time: approx. 8 weeks. Warranty: 12 months. Visit our factory and see the Priam drill your own glass samples before you buy — video of the machine in operation in this listing. Glasstec 2026, Düsseldorf, 20–23 October, Hall 12, Stand 12A72.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, operating hours: 10 h, input voltage: 400 V, input frequency: 50 Hz, total width: 1,487 mm, total length: 4,440 mm, overall weight: 1,900 kg, Equipment: documentation/manual, For sale: a practically unused vertical double-spindle glass drilling machine Expoglass PRIAM, year of manufacture 2023. The machine has drilled just under 300 holes — condition as new, like factory-fresh. Fully designed and manufactured in Poland by Expoglass. This is the latest version of the machine — technically almost identical to a new unit (current price of a new machine: EUR 39,000 net). Included in the price of EUR 29,000 net: software update to the latest version inspection including calibration optional installation at the buyer's site and operator training 6 months warranty on wear and mechanical parts Transport not included. The machine can be inspected on site at the current owner's premises. Advantages: automatic serial drilling of up to 20 holes very simple operation, minimal training time high machining precision — minimises glass cracking and chipping hole chamfering function modular design for fast servicing Technical data: Parameter Value Year of manufacture 2023 Holes drilled approx. 300 Length 4440 mm Height (operating) 2793 mm Height for transport 2100 mm Width 1487 mm Weight 1900 kg Communication 7" HMI panel + analogue buttons Spindle feed automatic, servo-stepper Ndjdpfx Ahszv Dunokea Feed control electronic Loading bar control electronic Spindle speed 700–2800 RPM Drill tip position measurement automatic Drill change with table lowering and spindle lock Spindle depth setting electronic (calculated by controller) Horizontal positioning double-row manual stop system Number of manual stops 6 pcs Material clamping pneumatic Hole chamfering function yes, electronically controlled Drill magazine capacity 70 drills Drill diameter measurement accuracy up to ±5 mm Glass thickness measurement accuracy up to 0.4 mm Loading bar positioning accuracy up to 0.7 mm Serial drilling yes, up to 20 holes Max. glass weight 200 kg (centred; max. 130 kg per half of the bar) Max. drilling height 1050 mm Recommended drills thin-wall "CHAMPION" L=75 mm Online remote support yes

Condition: used, Year of construction: 2014, machine/vehicle number: 95480257, functionality: fully functional, power: 31.6 kW (42.96 HP), input voltage: 400 V, input frequency: 60 Hz, travel distance X-axis: 4,870 mm, travel distance Y-axis: 1,840 mm, travel distance Z-axis: 250 mm, workpiece length (max.): 4,200 mm, number of axes: 4, total height: 2,350 mm, total length: 7,500 mm, total width: 3,800 mm, overall weight: 5,000 kg, We offer this used UNITEAM SPRINT 6U/40M continuous flow machining center, manufactured in 2014. Model: SPRINT 6U/40M Serial number: 95480257 Year of manufacture: 2014 Rated voltage: 400 V Frequency: 50/60 Hz Installed power: 31.6 kW Ndsdszhb Ivepfx Ahkoa If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), functionality: fully functional, Invema radial drilling machine Arm length: 130 Drilling capacity in steel: 45 mm Ndedpfx Ahezv T E Noksa Accessories: cube

Year of construction: 2011, condition: used, overall weight: 50,000 kg, total length: 9,500 mm, total width: 8,000 mm, total height: 5,200 mm, Working Area X-axis travel 3,900 mm Y-axis travel 2,940 mm Z-axis travel 1,100 mm B-axis (swivel head) 90° freely interpolating NC rotary table Ø 2,800 mm Nodpezwa Rnefx Ahkoda Max. workpiece weight 15,000 kg Spindle Tool holder SK 50 Spindle power 63 kW Max. torque 200 Nm Max. speed 6,000 min⁻¹ Feed Rapid traverse X/Y/Z 30 / 30 / 25 m/min Feed force 9,000 N Tool magazine Tool positions 20 Max. tool diameter 110 mm With free adjacent positions 180 mm Max. tool length 400 mm Rotary Table Clamping surface Ø 2,800 mm Max. transport load 15,000 kg Tangential moment 40,000 Nm Tilting moment 90,000 Nm Electrical connection values 3 × 400 V / 50 Hz Equipment HEIDENHAIN iTNC 530 HSCI NC rotary table Ø 2,800 mm Freely interpolating swivel head Portal design Full enclosure Automatic central lubrication Coolant system Chip conveyor Control panel on swivel arm Control: HEIDENHAIN iTNC 530 HSCI Travel X-axis: 3900 - mm Dimensions (LxWxH) approx.: 9500 x 8000 x 5200 mm 5-axis machining: Yes Travel Y-axis: 2940 - mm Movement B-axis: 90 - ° NC rotary table: Yes Travel Z-axis: 1100 - mm Weight approx.: 50,000 kg Year of construction: 2,011 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Year of construction: 2018, condition: used, overall weight: 10,000 kg, total length: 2,300 mm, total width: 6,500 mm, total height: 2,400 mm, BUDERUS CNC 235 – CNC Grinding and Machining Center Machining / Spindle 2 machining areas / channels Ndedpfozwa Rhjx Ahkoa Max. machining length: 150 mm Max. swing diameter: Ø 310 mm Workpiece spindle speed: 0–3,000 rpm Spindle bore: Ø 45 mm Workpiece spindle positioning via C-axis Table speed X/Z: 0–30 m/min Motor Spindle WMZ / DVS Type: GS 205-045/17 Year of manufacture: 2014 Automation Automatic workpiece feed / conveyor system Coolant / Filtration System LIQUI-Filter GmbH System: UR1060 / MW260 / Gamma 13 Tank capacity: 2,400 l Year of manufacture: 2015 Cooling System HYFRA gamma 13-F-S Cooling capacity: 13 kW at 32 °C Year of manufacture: 2015 Measuring Technology JENOPTIK post-process measuring technology Year of manufacture: 2018 Supply Data 3 × 400 V / 50 Hz Installed power: approx. 45 kW Compressed air requirement: 15 Nm³/h at 5 bar Control: Siemens SINUMERIK 840D Travel Z-axis: 300 - mm Workpiece diameter over bed max.: 150 mm Weight approx.: 10,000 kg Dimensions (LxWxH) approx.: 2300 x 6500 x 2400 mm Travel X-axis: 1240 - mm Year of construction: 2,018 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: Free loading on truck under power: No

Condition: used, Year of construction: 2022, functionality: fully functional, DMG MORI DMF 360/11 linear – Universal machining center, year of manufacture 2022, in excellent condition, always maintained on schedule, available for inspection at any time. Key technical data: Control system: Heidenhain TNC 640 Celos, 5 controlled axes Nodpfx Ahozv U N Noksda Travel ranges: X 3,600 mm / Y 1,100 mm / Z 900 mm Rapid traverse rate X/Y/Z: 80/60/60 m/min Spindle: 20–10,000 rpm, 44/32 kW, 288/187 Nm, SK 50 NC rotary table: 4,200 x 1,100 mm, max. table load 1,200 kg Tool magazine: 120 positions Equipment: Internal cooling 40 bar, chip conveyor, measuring probe Heidenhain TS 460, automatic doors

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, OPS INGERSOLL GANTRY EAGLE 800 Year of manufacture: 2022 Overhauled: July 2026 Top condition, very few operating hours (1540 hours of EDM operation) EAGLE Powertec PC/NC control system 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec handheld multifunctional operating device Manual EDM with Powertec handheld EAGLE Powertec - Fine finishing generator PT 60, 60 Amperes Njdpfozvctpsx Ahkjda (60 Amperes peak current) High-speed jump max. 18,000 mm/min. Travel ranges (X, Y, Z) 550 x 850 x 450 mm Linear measuring system in all axes Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer, 20-position pick-up disc magazine Work tank (W x D x H) 800 x 1,100 x 480 mm Work table (W x D) 760 x 1,000 mm Load capacity 2,000 kg Overhang load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: Erowa, type UPC production chuck CO2 fire extinguishing system

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, STC-Ref:G-022-7715 Heidelberg Plattenabkante // Platebender, Year: 2008 Ndodpfx Ahjzcuzyekja equipped: - suitable for Heidelberg SM / CD - Plate bender --> available: immediately, in stock

Condition: repair required (used), functionality: not functional, We are offering this 3X HP Latex 365 digital printing machine, year of manufacture unknown, which requires repair. 3 machines, sold as a package. Not immediately operational. Various faults. Perfect for dismantling or as a trade-in. Manufacturer: HP Model: Latex 365 Condition: requires repair Category ID: 177 Type ID: 976 Type: Digital printing machine Nsdpfezv Skkox Ahkeda If you have any questions or require further information, please send us a message or call us.

Condition: good (used), Year of construction: 2014, Offer 26252 Technical data: - Drilling capacity in full steel ST 60: 22 mm Njdpezwftzsfx Ahkeda - Drilling capacity GG 25: 32 mm - Thread cutting ST 60: M 20 - Thread cutting GG 25: M 24 - Drill spindle mounting: MK 4 - Quill stroke: 140 mm - 18 drill spindle speeds: 60 - 3050 rpm - Drilling feed, stepless: 0.075 - 0.15 - 0.70 mm/rev - Drilling radius min / max: 420 / 1320 mm - Swivel angle: 320° - Table size: 1200 x 600 mm - Table height: 905 mm - Motorized height adjustment / stroke of the drill column: 430 mm - Hydraulic column and arm clamping - T-slots, vertical, on the left side of the machine - Coolant system - Drive: 400 V / 1.1 / 1.6 kW - Space requirement: approx. W 1300 x H 1910 / 2340 x D 2700 mm - Weight: approx. 1800 kg

Condition: ready for operation (used), Year of construction: 1998, Table size: 400 x 800 mm Travel ranges x/y/z: 600/400/380 mm Quill stroke: 80 mm Spindle mount: SK 40 Vertical milling head, adjustable in 2 planes Spindle speeds, stepless: 63 - 3150 rpm Nodpfx Aszvm H Hohkjda Feeds, longitudinal/vertical, stepless: 4 - 1200 mm/min Electrical connection: 400 V, 4 kW Space requirement: 1800 x 1700 x 1900 mm Weight, approx.: 1.65 t

Year of construction: 2001, condition: used, Travel X/Y/Z/W: 1500mm/1250mm/1000mm/550mm, B-axis: 360°, boring spindle diameter: 110mm, spindle speed: 4000rpm, gear ranges: 2, rapid traverse: 15m/min, tool taper: SK50, table dimensions X/Y: 1000mm/1250mm, T-slot width: 22mm, height of clamping surface above floor: 1050mm, max. table load: 6000kg, control: Heidenhain TNC 426. With electronic handwheel. Weight: approx. 13500kg. An on-site inspection is possible. Nsdezwfqyjpfx Ahkeda

Year of construction: 2004, condition: used, A BATTENFELD large-format horizontal injection molding machine in need of repair is offered. Operating pressure: 210bar, clamping force: 4500kN, screw diameter: 85mm, injection volume: 2128cm³, injection pressure: 1624bar, tie-bar spacing X/Y: 900mm/800mm, opening stroke: 950mm, max. mold height: 970mm, oil capacity: 900l, connected load: 55kW, operating hours: approx. 82510h, weight: approx. 20.4t. The servo motor for the screw drive is defective. In addition, some smaller parts are missing. An on-site inspection is possible. Ndedezvy E Aspfx Ahkea

Year of construction: 2019, condition: used, Travel X/Y/Z: 650mm/500mm/475mm, table dimensions X/Y: 1530mm/450mm, max. table load: 400kg, spindle taper: SK40, max. spindle speed: 4000rpm, spindle power: 7.5kW, milling head swivel range: 140°, control: Heidenhain TNC 620. Weight: approx. 2750kg, machine dimensions X/Y/Z: approx. 2200mm/2300mm/2050mm. An on-site inspection is possible. Njdpfszwgidox Ahksda

Condition: new, Year of construction: 2026, CORMAK DI325 – Compact Dry Ice Cleaning Machine The CORMAK DI325 is a compact and modern dry ice cleaning machine designed for effective removal of dirt from machinery, molds, tools, production components, and technical surfaces. It is an ideal solution for companies looking for an efficient, clean, and safe cleaning method without the use of chemicals, water, or abrasive materials. Njdpfezwfulex Ahksda The main advantage of the DI325 is its compact design and high mobility, which clearly distinguish it from many larger and less convenient machines available on the market. This makes the machine suitable not only for production facilities, but also for servicing, maintenance, field work, and any application where convenient transportation and quick setup are important. The machine uses dry ice pellets with a diameter of 3.0–8.0 mm and allows precise adjustment of operating parameters to suit the type of surface being cleaned and the level of contamination. Adjustable operating pressure and dry ice feed rate enable effective cleaning of both delicate components and more demanding industrial surfaces. Key Advantages Compact design for easy transportation and use in different locations, high mobility and convenient operation, effective cleaning without chemicals or water, non-abrasive cleaning that does not damage the treated surface, adjustable operating pressure, adjustable dry ice feed rate, quick setup and preparation for operation, ideal for industrial, service, and technical applications. Applications The CORMAK DI325 is suitable for applications including: cleaning machinery and production equipment, removing dirt from molds, tools, and components, cleaning metal and technical components, service and maintenance work, cleaning surfaces without the need to dismantle multiple components, removing deposits, grease, process contamination, and production residues. Included Equipment You receive a brand-new CORMAK DI325 dry ice cleaning machine, ready for operation with dry ice pellets, equipped with: CORMAK DI325 machine, a set of nozzles in various shapes and sizes, accessories required for operation according to the selected configuration. Different nozzle shapes and sizes allow the working stream to be adapted to the type of component being cleaned and the specific working environment, increasing the machine's versatility in everyday use. Technical Specifications Technical specification Value Power < 550 W Power supply 230 V AC, 50 Hz Air consumption 0.8–3.0 m³/min Pneumatic supply pressure 0.4–1.0 MPa (4–10 bar, adjustable) Dry ice feed rate 0–0.75 kg/min (adjustable) Dry ice hopper capacity 5 kg Weight 55 kg Dry ice pellet size 3.0–8.0 mm Drive system Direct drive Machine dimensions (L × W × H) 580 × 420 × 650 mm

Condition: good (used), Year of construction: 1999, Control: Siemens 840 D Powerline Tool holder: HSK-A63 Max. rpm: 16,000 X-travel: 3,000 mm Y-travel: 2,500 mm Z-travel: 1,150 mm A-axis: +/- 100 mm C-axis: +/- 181.5 mm Table size: 3,000 mm x 2,500 mm Option: External blowing air Kinematics: Fork head Ndjdpfx Aszwk E Aohksa

Condition: new, functionality: fully functional, Our state-of-the-art automatic tube filling machine is a versatile all-rounder, specifically designed to optimally support companies with the highest quality requirements. Thanks to its superior build quality and wide application range, it offers intuitive operation to efficiently and reliably optimise your tube filling processes. Powerful drives and a user-friendly colour touchscreen control system enable maximum flexibility for format and product changes, greatly simplifying your tube filling operations. The machine features memory slots for rapid and reproducible setting of all relevant machine parameters. If you are looking to optimise your tube filling processes with strong production performance while maintaining high quality, Impuls Packaging is your ideal partner. System Overview Ndjdpfx Ajyq Hgkshkea Parameters: Power supply: AC 220V / 50Hz or 110V / 60Hz Power: 4 kW Filling range ● 2–5 ml ● 5–30 ml ● 10–140 ml ● 30–300 ml (customisable) Tube diameter: 10–50 mm (customisable) Tube length: 30–250 mm (customisable) Hopper volume: 50 L Filling accuracy: ±1 % Capacity: 40–60 tubes/minute Machine dimensions: 2050 × 900 × 1900 mm Net weight: 850 kg

Condition: excellent (used), functionality: fully functional, Factory closure for mask production. Installed in 2021, out of operation since March 2022. The systems are already dismantled and ready for shipment. Nodpfxoxqgffs Ahkeda

Condition: used, Vacuum Filler Handtmann VF 300 3 The Handtmann VF 300 vacuum filler is the ideal solution for precise filling, portioning, and linking of food products. These filling machines are widely used in various industries, including bakeries, butcher shops, convenience food production, snacks, salads, cheese, fruit and vegetables, processed meat products, fish, vegan and vegetarian products, baby food, and pet food. Njdpfozwlpisx Ahkjda The fillers are robustly constructed and comply with the strictest standards and requirements applicable in the modern food processing industry. Thanks to the intuitive touch-button control, different programs can be easily set. The filler can be equipped with various auxiliary machines, including clippers, forming machines, and diaphragms. The machine is equipped with a standard container lift for 200 L containers. The filling machine is entirely made of stainless steel. Technical specifications: - Production capacity: 10,000 kg/h - Functions: filling, portioning Portion size: 5 g – 100,000 g Number of portions: up to 500 portions/min Filling pressure: 35 bar Hopper capacity: 90 / 240 L Voltage: 380 V (3 + N, 50 Hz) Power: 9.5 kW Weight: 1,302 kg Dimensions (W x D x H): 2,000 x 1,350 x 2,060 mm

Condition: new, Year of construction: 2026, Automatic strapping machine KPW-8060 | PP strap | 220V | up to 60kg | New Description Automatic PP strapping machine KPW-8060 – professional new product Efficient automatic strapping machine for professional use in shipping, warehousing, logistics, production and e-commerce. The KPW-8060 automatically guides the PP strapping band around the package, tightens the band and seals the band ends. With a strapping time of only approx. 1.8 seconds, the machine is particularly suitable for companies with a regular volume of packaging. Technical data: Model: KPW-8060 Type: Automatic PP strapping machine Frame size: 800 × 600 mm (W × H) Maximum strapping size: 600 × 400 mm (W × H) Speed: approx. 1.8 seconds per strap Tension force: adjustable from 0–60 kg Suitable PP strap width: 8–15 mm Suitable strap thickness: 0.5–1.0 mm Power supply: 220 V / 50–60 Hz / 1-phase Power: 800 W Working height: 750 mm Aluminum frame Machine weight: approx. 180 kg Machine dimensions: 1,350 × 600 × 1,430 mm Application areas Ideal for strapping boxes, packages and other suitable items, for example for: Shipping and logistics companies Production plants Warehouses and wholesalers Online retail / fulfillment Packaging and shipping stations Your advantages ✓ New product ✓ Fully automatic strapping process ✓ Fast processing – approx. 1.8 seconds per strap ✓ Adjustable tension force up to 60 kg ✓ PP straps from 8–15 mm can be used ✓ 220-V connection ✓ German commercial seller and contact person ✓ Invoice with VAT shown Price €2,990.00 incl. 19 % VAT Net price for business customers: €2,512.61 plus 19 % VAT Delivery Delivery is by forwarding agent. Please note the delivery time specified in the offer. Nedjzwgk Ispfx Ahkeda If you have any questions about the machine, technical equipment or delivery, please feel free to contact us before purchasing. Seller H.Z. Tagiyev UG (limited liability) Germany Commercial sale with invoice and VAT shown.

Condition: used, Surface Grinding Machine BLANCHARD type 20D Shelf diameter: Ø 915 mm Shelf speed: from 5 to 27 RPM Grindstone diameter: Ø 500 mm Maxi height under wheel: 450 mm Spindle motor: 30 CV - 715 RPM Electromagnetic chuck Rapid Up/Down Voltage 220 V Tri Ndjdpfezwgumox Ahkea Dimensions (L x W x H): 3700 x 2000 x 2600 mm Weight: 6 T

Condition: used, Year of construction: 2010, Machine design: Cantilever machine Travel in X-direction: 3800 mm Travel in Y-direction: 1815 mm Travel (Z-axis): 600 mm Vector-controlled spindle: Yes Spindle cooling: Liquid cooling Number of axes: 5 Tool changer: Disc tool changer Back wall milling units: Yes Control system type: PC control Operating system: Xylog Typewriter keyboard: Yes Mouse: Yes Programming system: Xilog DXF interface: Yes Online connection possible: Yes CD-ROM drive: Yes Table design: Console table, tubeless Ndodpfx Ahezwg H Aekea Support arms: 8 pcs Suction plates and clamps: various included Number of vacuum pumps: 1 pc Changeable field layout: Yes Extraction hood: controlled via axes Setup aid: Dot laser setup aid Safety features: Safety floor mats Central lubrication: automatic Tools: various tools available at an extra charge Dimensions: 6600x4800 mm Extraction diameter: 300 mm Storage location:

Condition: used, Year of construction: 2013, max. wheel diameter 260 mm gear width 320 mm max. module 4,5 min. module 0,5 Control SIN 840D Ndedpfx Aex R U Hgohksa max.helical angle +/- 45 ° total power requirement 68 kW weight of the machine ca. 15,50 t dimensions of the machine ca. 3,25 x 3,25 x 3,30 m Fire extinguishing system Siemens Sinorix TM Knoll Filtering system VL1500/8000 year 2017 Wekal loading cell

Condition: excellent (used), Year of construction: 2021, GANNOMAT "PROTEC 571" (drilling, grooving, milling) with Clamex and milling tools In top condition Base machine complete in standard configuration for drilling and grooving, including: - Additional safety device via louver curtain - Prerequisite for horizontal Lamello P-system milling - Prerequisite for milling diameters > Ø 16 mm, as well as for the use of multi-part milling tools Detailed technical data can be found in the data sheet for ProTec Type 0571 Machining unit with: PowerBlock with 21 spindles and 1 dado saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y / 2 horizontal drilling spindles in X - 1 grooving unit in Y Workpiece sizes and weights Nedpfx Aezu A D Eshkeda - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in continuous mode max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg 1 Milling unit Profit HSK63F with 3-way magazine for automatic tool change, motor 5.5 kW (S1), 1000-18000 rpm with frequency inverter, clockwise and counterclockwise rotation, for tool holder HSK63F with collet 462E/OZ25, cutter length up to 130 mm including options 1 Roller table 765 mm (Y-axis) foldable, for the front of the machine, width 500 mm 1 Roller table 765 mm (Y-axis) foldable, for the rear of the machine, width 500 mm 1 Auxiliary stop 600 mm with integrated rollers for roller tables 1 SET OF TOOLS: Drill set for ProTec 1 Carbide grooving cutter  125/30 mm, grooving cutter width (SB) 4 mm, Z=12, LI, by Leitz 1 Tools for milling unit Profit HSK63F and HSK63F with 3-way magazine with collet 462E up to shank diameter 25mm, HSK and cutter set 1 HSK mounting set 1 Mounting device HSK63F, easiest operation with maximum user comfort thanks to roller clamping system, no clamping or tightening required, mounted on a stable base or workbench, 1 Hook wrench for HSK63F collet 462E, 1 Extraction distributor Ø 160 mm / Ø 80-80-80 mm, pitch 196 mm 1 Counterpressure device from above 1 Tool for vertical Lamello P-system milling Machine in very good condition with many drills and tools included. The machine can be viewed and demonstrated at our showroom. Location: available from stock in 54634 Bitburg - immediately available -