Used Automatic Spray Pre-Treatment System for sale (53,102)

Condition: used, Rotary indexing table, rotary indexing table with 16 stations Kedjgd D U Eopfx Abfsdn Rotary indexing machine + TOX hydraulic press Special rotary indexing machine with multiple assembly stations Production and assembly line with rotary indexing system From special machinery manufacturer "AKE-technologies GmbH" Serial number: Order number: 11111 Year of manufacture: 2012 - large rotary indexing table WEISS type TC500, with 16 stations - pressing station with TOX power pack - vibratory feeder - conveyor belts - testing stations - some stations still visible in the photos but already dismantled Required space L x W x H approx. 3500 x 2750 x 2300 mm Net weight approx. 3000 kg All in as-new condition – the system was never used in series production.

Condition: used, Single-column eccentric press EBU Type 75 SKU Machine no. No. P 4598462 Year of construction 1962 Compressive force 75 ton. throat depth 300 mm Table surface 800 x 620 mm waste hole 325 x 225 mm Plunger surface 470 x 180 mm Clamping pin bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Kdsdpfxedzqlte Abfen Plunger adjustment 80 mm Installation height max. approx. 420 mm Stroke rate 60 + 105 strokes/min. Motor power 4 kW Mains connection 380 Volt, 50 Hz. - Pneumatic clutch/brake combination EBU - Overload protection with breaker plate in ram - UNIDOR tool monitoring system, type APS MINI - mechanically driven gripper feed with belt straightener OSTERKAMP, type ZPN 200/350 - strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds due to 2 V-belt stages on the wheel transmission - Two-handed operation - Simple work area shielding for swinging open - Table height adjustment in lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and control panel for tool monitoring adjacent - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons good condition

Condition: used, Turning station RITTAL / E SYS-K System GmbH Automated turner for packaging made from ALU system profile Swivel station with roller conveyor, ALU system profile BOSCH REXROTH Weight of turning device: 730 kg As-new condition Ksdpsv Tdkbsfx Abfjdn

Condition: used, Filter fitting, filter unit COMPAIR for compressor units Compressed air filter Type: CF 0087B ZP Factory No.: 3363006 / 05 / 005 Operating pressure: max. 16 bar Thread connection: G 1 1/2" Flow rate: approx. 8,5 m³/min Filter element- No: CE 0087B - Filter housing made of aluminum weight: 5 kg dimension L x W x H 125 x 110 x 420 mm good condition Kodpfohalvdjx Abfjdn

Condition: good (used), Offer 23501 Gas transfer system with pressure reducer + separator Kdsdperf Uqzsfx Abfen Technical data approx: - Gas transfer system for nitrogen , argon , forming gas , hydrogen - from plasma cutting system + flame cutting system make ESAB - mounted on stainless steel plate as shown - div . pressure reducer + separator - Weight approx. 80 kg - Space requirement system approx. W 1.6 x H 1.5 x D 0.2 m

Condition: used, Flood nozzle zone: - 8 pieces, 3 flood nozzles, adjustable, from above - 10 pieces, 3 flood nozzles, adjustable, from below - Material-carrying parts made of stainless steel - With pump unit for the flood nozzles Drying zone: - Air circulation fan with soundproof housing, dimensions 1190x1190x1170 mm - el. power 15 kW, connection diameter DN 300 mm - Air circulation system incl. fan (see pdf.) - 4 nozzles, each 1300 mm wide, for drying from above, adjustable - 4 nozzles, each 1300 mm wide, for drying from below, adjustable Transport system: - Transport system Stainless steel disk roller conveyor Technical data: - Manufacturer Finnrose - Type. Impregnation 1300 - Year of construction 1999 - Working width 1,300 mm - Max. Part height 300 mm - Shortest part length 300 mm - Length 4,000 mm - Width 1,860 mm - Height 2,200 mm Ksdpfxsu Tttye Abfodn - Location, in stock

Condition: used, Year of construction: 1992, functionality: unexamined, Technical Specifications Make and model: Bruderer BSTA 25 EL Nominal capacity: 250 kN, 25 tons Year of manufacture: 1992 Year of control upgrade: 2020 Max. number of strokes: 100/1425 Adjustable stroke: 13, 16, 19, 25, 32, 38 mm Ksdpfx Abjyktftjfodn Table dimensions: 640 x 530 mm Passage between the supports: Longitudinal 640 mm; Lateral 220 mm. Fitted with roll feeder BBV 190/85 on right hand side. Max width of strip: 160 mm Feed length: variable up to 85 mm max Optional: Sound insulating cabin Oil pump. Heat exchange oil cooler. Front and rear safety guards. Fitted on 4 spring feet. Slide/Ram adjustment: 51 mm Documentation included. Press weight cca. 5000 kg.

Condition: new, Year of construction: 2026, Experience Palletisers & Toppy's fully automatic pallet changer systems, tailored to seamlessly integrate into your production lines, high-bay warehouses, and specific applications. Palletiser & Toppy work closely with system integrators to create customized pallet changer solutions that address your company’s unique requirements. Toppy "Four Press" is one of the safest solutions in our range. It is specially designed for fragile and unstable loads and features four walls (two front and two side) along with optional 'special mats' to secure products during pallet exchange and eliminate any risk of falling. The entire pallet change process is fully automated, ensuring efficiency and safety in your operations. Kdjdpexd Eyhsfx Abfsn Our in-house R&D team specializes in designing and adapting fully automatic pallet changer systems that fit your workflow, range of products, and specific needs. Whether you operate in logistics, manufacturing, or another industry, Toppy’s solutions provide the ultimate in safety, efficiency, and system integration. A fast and simple method to switch between wooden and plastic pallets, or vice versa.

Condition: used, Year of construction: 2001, functionality: fully functional, Technical Specifications Press capacity: 800 kN (80 tons) Stroke rate: 60 – 320 strokes per minute (SPM) Stroke adjustment: 8 – 80 mm Ram adjustment (shut height adjustment): 80 mm Table size: 830 × 700 mm Bolster plate thickness: 80 mm Table opening: 500 × 200 mm Strip feed height over table: 120 mm Ram area: 500 × 400 mm Ram bore: Ø 50 × 90 mm Ram centering bore tolerance: 30 H7 mm Precision guided ram, multi-roller guidance system. Main motor power: 23 kW Drive system: Flywheel drive with planetary gearbox and pneumatic clutch/brake combination. Machine weight: approx. 8000 kg Gripper Feed Schaal SZV 3: Feed length: 4 – 150 mm Strip width: 10 – 270 mm Strip thickness: 0.1 – 4 mm We also have on stock Schaal SEP 80 with SWV3E 300 mm wide Servo Feeder. Ksdpfx Asyidnysbfjdn Unidor Control, Machine and Operator Safety. Full Technical Documentation in German including Parts list and Technical drawings.

Year of construction: 2023, condition: ready for operation (used), A relatively modern corona pretreatment system for single sided aluminum foil coating is available. Material: aluminum foil, intended use: coating, coating sides: 1, web width: 1350mm, treatment width: 1450mm, treatment speed: 3m/min, roll diameter: 125mm, roll length: 1550mm, generator type: Softal 9030, generator power: 3kW. Total system dimensions X/Y/Z: approx. 2000mm/1550mm/1700mm, weight: approx. 1500kg. Including ozone exhaust system RD 4. Documentation available. An on site inspection is possible. Kedpfx Absyrta Hsfodn

Year of construction: 1999, condition: ready for operation (used), A Ferrarini & Benelli corona pre-treatment system for surface activation of non-conductive materials in continuous production processes is available. Generator type: C15/4N, output frequency: 15kHz, electrode design: multi-cylinder roller electrodes, max. treatment width: 200mm. An on-site inspection is possible. Kjdpfx Absyn N Avjfsdn

Condition: new, Year of construction: 2026, 200L mobile pressure-blasting vessel for construction sites or stationary use. Fittings are securely mounted under the handle. Very well suited for robust site applications. Comprising: - 200L pressure vessel Kdsdpfeynr E Tjx Abfon - Pre-sieve - Weather protection lid - Water separator - Pressure regulator - Adjustable conveying air control (air quantity for vessel and blast hose) - Blast hose Ø25mm, 10m - Venturi blasting nozzle Ø8mm (air consumption at 6 bar approx: 3.57m³/min) - Abrasive metering valve, Y-piece rubber coated for reduced wear - Breathing air filter with 10m air hose - Blasting helmet Safety equipment: - Dead man's switch with control cable - Controlled quick venting Optional: - Larger handle with hose holder - Wet blasting head - Breathing air heater - Transport frame with bucket (Hobbock) and lid as an attachment for extended blasting without refilling - etc. Manufactured in Germany

Condition: new, Year of construction: 2026, Mobile 100L pressure blast pot for construction sites or stationary use. Fittings securely mounted beneath the handle. Ideally suited for demanding construction site applications. Comprises: - 100L pressure vessel - Pre-sieve - Weather protection cover - Water separator Ksdpfoynr Emsx Abfedn - Pressure regulator - Adjustable delivery air (air volume for vessel and blasting hose) - Blasting hose Ø25mm, 10m - Venturi blasting nozzle Ø8mm (air consumption at 6 bar approx.: 3.57 m³/min) - Abrasive mixing valve Y-piece, rubber-coated for reduced wear - Breathing air filter with 10m air hose - Blasting helmet Safety equipment: - Dead man switch with control cable - Pneumatic quick venting control Optional: - Larger handle with hose holder - Wet blasting head - Breathing air heater - Transport frame with container and lid as attachment for extended blasting without refilling - and more. Manufactured in Germany

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, type of input current: three-phase, 🔶 P SYSTEM P300 – PELLET PRESS 30 kW USED – REFURBISHED BY THE MANUFACTURER Industrial pellet press P System P300 – 30 kW, complete with control panel, refiner, and dedicated hydraulic power unit. Used machine, refurbished by the manufacturer, ready for installation and/or integration into a complete pelletizing plant. Compact, sturdy, and reliable solution for the production of pellets from sawdust and fine biomass. 📊 Main technical data Main motor: 30 kW Output: up to 350 kg/h* Material: sawdust and fine wood chips Required moisture content: 13–14% Typical energy consumption: • approx. 25 kWh at 250 kg/h of pellets • approx. 30 kWh at 300 kg/h of pellets *Productivity and power consumption may vary depending on material type, particle size, and moisture content. ⚙️ Included configuration ✔ Control panel ✔ Refiner ✔ Dedicated hydraulic power unit ✔ P System industrial frame 🔧 Possible upgrades Kjdpfsyk Etvjx Abfedn • Pellet discharge screw conveyor • Mini-silo, feed conveyor, or container for raw material collection • Magnetic separator • Additional refiner • Dust recirculation filter • Pellet collection hopper • Manual or automatic bagging system 📍 Immediate availability (subject to prior sale) 📦 Condition: used – refurbished by the manufacturer 🚛 Delivery: ex works (EXW Cremona, Italy) 💰 PRICE €39,250.00 + VAT (ex works – EXW Cremona, Italy)

Year of construction: 2011, condition: excellent (used), CONTEC-COMPRESSORS Kedofdl H Topfx Abfodn POWER SCREW COMPRESSOR SYSTEM PS 2037 PM, WITH INFINITELY VARIABLE SPEED CONTROL (INVERTER) ENGINE 37 KW, Efficiency of 5 m3/min, 10 BAR PRESSURE. YEAR 2011. TECHNICAL CONDITION IN WORKING ORDER. START-UP GUARANTEE. NET PRICE 13000,- GROSS PRICE 15990,- S0048 MORE COMPRESSORS, DRYERS ON SALE AND WELDING EQUIPMENT. WE SERVICE AND REPAIR COMPRESSORS OF THE STRUCTORS. RATY! CONTEC-COMPRESSORS

Condition: used, Year of construction: 1980, control panel Boschert Stanze Kdjdjx U A H Njpfx Abfsn Year 1990 +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Benzinger TNL / TRP I CNC Precision Lathe Manufacturer's specifications, deviations are possible. Center height: 80.5 mm Max. turning length: 100 mm Max. swing diameter over bed: 220 mm Max. swing diameter over cross slide: 130 mm Max. travel length in x direction: 300 mm Max. travel length in z direction: 240 mm Power supply: 380 V 50 Hz CNC Numerical Control: Bosch CC 100 T Kdedpfx Abjhufc Eofjn Accessories/Special Equipment: TRP Swing Loader Complete factory closure, large selection of storage platforms, pallet racks, shelving units, and paternosters. High-quality industrial machines, lathes, grinders, and hand tools Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs upon request!

Condition: used, Mobile chamber filter press plant, dewatering plant, sludge plant, second-hand Application: chamber filter press, mobile dewatering, transitional dewatering, Design: mobile 1200/103-30 REWA/R&B Machine no.: 17100-44 Filter plate format: 1200x1200 mm Number of plates: 103 Filter plates: PP Cake thickness: 30 mm Filter cloths: optionally available to match the medium Filter area: approx. 230 m² Press capacity: approx. 3550 dm3 Filter pressure: approx. 15 bar Plate transport: automatic Pump technology: optional Control cabinet: yes Discharge: by means of discharge screw Mounted: on semi-trailer Kjdpfxjrnnt Is Abfsdn Purchase or hire: Inspection of the systems by arrangement at our factory.

Year of construction: 2016, condition: ready for operation (used), The Coiltech Decoiler Straightener Feeder System is a compact press feeding system. Belt width: 600mm, material thickness: up to 6.5mm, straightening rollers: 7x115mm, decoiler tonnage: 6000kg, diameter (inner), min-max: 470-520mm. Connected load: 7.5kW, with documentation. Kdjdpfxoi El Ucs Abfjn

Condition: ready for operation (used), System includes (1) Screw Compressor BOGE SF 75-2 (2) Cyclone Separator BEKO CLEARPOINT (3) Fine Filter BEKO CLEARPOINT (4) Refrigeration Dryer BEKO DRYPOINT RA eco (5) Catalytic Converter BEKO BEKOKAT CC 360 (6) Carbon Filter BEKO CLEARPOINT. Kdedpfx Abehvizgofsn

Year of construction: 2013, condition: ready for operation (used), A complete gray fabric preparation and further processing line with butt seam sewing machine as well as an automatic double, folding and measuring system from MontiMac Italy is available. 1) Gray preparation line MontiMac model 1090, year of manufacture: 2013, material: cotton, fabric width range: 1800mm/3000mm, seam type: butt seam, material feed: pallets/bales, max. roll diameter: 500mm, sewing unit: TA21-3FY, cleaning brushes: 2. Including inspection table, brush cleaning unit, dedusting and fabric outlet. 2) Super automatic double, folding and measuring machine MontiMac Lafra 200TDD with pallet based design, double triangle usable width, machine usable width: 1600mm, max. fabric package folding height stacking height: 2000mm, max. table load: 1500kg. Including fold counter, control measuring system and length counter. 3) Butt seam sewing machine MontiMac TU03/105 with movable frame. Documentation available. On site inspection is possible. Kedoyhqcdopfx Abfedn

Condition: ready for operation (used), Year of construction: 1993, A candle filter system Faudi with precoating principle for the treatment and purification of grinding oil is available. Operating fluid: grinding oil, flow rate: 360m³/h, tank capacity: 180m³, control: Siemens. Documentation available. An on-site inspection is possible. Kjdpfx Aboxnbr Ijfodn

Year of construction: 2020, condition: ready for operation (used), A Rico compressor system consisting of two Atlas Copco compressors, two refrigerant dryers and an Atlas Copco Beko oil-water separation system is available. Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air volume flow: 9.4m³/min, operating pressure: 13bar, motor power: 45kW, motor speed: 4500rpm, machine dimensions X/Y/Z: approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45kW, operating pressure: 18.5bar, speed: 3000rpm. 2x refrigerant air dryers Atlas Copco FX 15, air volume flow: 15m³/min, operating overpressure: 13bar, pressure drop: approx. 0.3bar, refrigerant: R410A, refrigerant charge: 2050g, max. inlet air temperature: 60°C, machine dimensions X/Y/Z: approx. 900mm/750mm/1000mm, weight: approx. 160kg. Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, control range: 2-6 compressors. Oil-water separation system Beko ÖWAMAT 15, throughput range: 6m³-30m³/min, oil outlet: DN40, container volume: 115.5l, filling volume: 84.3l, oil collection container: 2x10l, max. operating pressure: 16bar, machine dimensions X/Y/Z: approx. 1100mm/550mm/800mm, weight: approx. 40kg. System operating hours: 8656h, controller hours: 42334h. Documentation available. An on-site inspection is possible. Kdodpfxjxdc Uve Abfjn

Condition: ready for operation (used), A complete Boge compressor system with a capacity for 16 compressors with a central control system is available. 1) Boge SLF 271 screw compressor, capacity: 30.5m³/min, cooling air volume flow: 5000m³/h, drive motor: 200kW, weight: approx. 4700kg. 2) Boge S 271 screw compressor, capacity: 30.5m³/min, cooling air volume flow: 5000m³/h, drive motor: 200kW, weight: approx. 4500kg. 3) Boge S 180 screw compressor, capacity: 20.8m³/min, cooling air volume flow: 5000m³/h, drive motor: 132kW, weight: approx. 3200kg. 4) Microfilter Boge FFP 250. 5) Refrigeration compressed air dryer Boge DS 460, capacity: 46m³/min, max. operating pressure: 14bar, weight: approx. 500kg. 6) Refrigeration compressed air dryer Boge DS 260, capacity: 20.8m³/min, max. operating pressure: 14bar, weight: approx. 240kg. 7) Boge tank, volume: 5000l, max. tank pressure: 11bar, weight: 1200kg. 8) Condensate cleaning unit Boge CC35, tank capacity: approx. 86l, tank filling volume: 43l. 9) airtelligence Provis control unit with capacity measurement and OPS interface. 10) Cooling water recooling station, cooling capacity: 600kW, volume flow: 37.2m³/h, weight: approx. 1000kg. The entire system is operated with a central control system. Complete documentation available. On-site inspection is possible. Ksdpfxsuanrdo Abfjdn

Condition: reconditioned (used), Fortuna bun press/dough divider Gr.3, from 35 g to 85 grams. The machine has been overhauled and newly painted. Comes with 3 moulding plates. 4x16 A connection. The machine works perfectly and can be put into operation immediately. If you have any further questions, please contact us. Thank you very much. Kodoc Utkaopfx Abfedn