Used Wood Processing Line With Frame Saws for sale (41,834)

Condition: used, Frame Saw Esterer LSH Year of Manufacture: 1968 Clearance: 65 cm 500 mm stroke Oscillating frame Automatic overhang adjustment Hydraulic roller lifting With splitter wedge With drive motor With gear transmission With saw blades With hydraulic saw tensioner Gsdpew Dn S Aofx Af Sjiw With suspension system With templates With log carriage Weiss HdT-L, Year 1996 (can also be sold separately) The machine has been out of operation for quite some time and should be thoroughly checked and overhauled. Location: Austria, near 8700 Leoben

Condition: used, Year of construction: 1977, Wurster and Dietz GDZ 600 GES Year of construction 1977 Passage: 71 cm stroke: 600 mm with swing frame with water-cooled guides with hydraulic saw clamp Jansen with riving knife Giodpfsqpdi Ujx Af Ssw with saw blades with templates with fence immediately available Location: Austria, near Klagenfurt

Condition: good (used), functionality: fully functional, number of straightening rollers: 7, coil outer diameter: 1,400 mm, coil inner diameter: 508 mm, roller diameter: 80 mm, number of feed rollers: 2, feed roller diameter: 80 mm, straightening roller diameter: 80 mm, coil width: 400 mm, load capacity: 3,000 kg, 1. Decoiler Make: Dimeco Model: 2371 E-FPS Year of manufacture: 2006 Load capacity: max. 3 tons Strip width: max. 600 mm Expansion range: 470 – 530 mm Coil outer diameter: max. 1,400 mm Equipped with: • Hydraulic expansion • Pneumatic hold-down roller from above • 6 strip edge guide arms • Pneumatic disc brake Gisdotgvgpopfx Af Ssw 2. Straightening Machine Make: Dimeco Model: 1676 C-VV Year of manufacture: 2000 Strip width: max. 400 mm Strip thickness: 0.8 – 4.5 mm Number of straightening rollers: 7 Number of entry and exit rollers: 2 each Roller diameter: 80 mm Equipped with: • Frequency-controlled drive • Hydraulic strip feeding aid with support table, feed tongue, hold-down arm from above • Pneumatically liftable entry roller • Lateral strip guide rollers • Pneumatically swivelling strip transfer table between straightening machine and feeder

Year of construction: 1998, condition: excellent (used), Panel saw for Plexiglas and wooden panels with suction device Gjdpjinunqofx Af Sjiw very good condition Max cutting height: 2200mm Max cutting length: 4200mm Max. cutting thickness: 60mm Length: 5600mm Depth: 1400mm Height: 2900mm Weight: 850kg

Condition: used, The sale is due to insolvency. The entire system was purchased in 2021 and was only in operation for approximately 3 years. Manufacturer: Randek (Sweden) Year of manufacture: 2021 Gsdpjxqpqksfx Af Ssiw 1. Saw Type: SPL 728 X04 Control: Beckhoff, touchscreen Languages: See photos Mitre cuts: 0°–360° Bevel cuts: 90°–28° Max. material thickness: 250 mm Saw blade diameter: 700 mm Power: 7.5 kW 2. Infeed unit with stacking device, right Type: UV130F2X05 Length: 13 m Lifting table: 4,000 kg 3. Outfeed unit with stacking device, left Type: IH106F1X01 Length: 10.60 m Lifting table: 5,500 kg 4. Label printer Brand: ZEBRA Overall system dimensions approx.: Length 24 m x width 3 m

Condition: new, Year of construction: 2026, functionality: fully functional, on stock! The GAP 100 automatic profile sharpening machine sharpens your gang saws and features a compact, extremely stable design, high functionality and excellent value for money. Highlights Hydro pneumatic return stroke of saw carriage Pneumatic saw blade clamping Precision linear guide for saw carriage Giedpfxog Uzl Es Af Sew Precision spindle height adjustment for saw blade width Fully enclosed protection hood with powerful water-cooling Feed speed regulator with frequency converter Grinding wheel dressing device Dust mist exhaust Lever control for 3 different tooth shapes Continuous tooth pitch adjustment Speed regulator for grinding wheel Optical signaling device for process status recognition (3-color signal lamp)

Condition: used, Year of construction: 1976, Esterer LSH Sash Saw 1976 - Automatic cantilever adjustment - Hydraulic roller lifting - Swing frame - With templates - With magnetic holder - With Jansen saw tensioner - With Esterer Arta-C riving knife - With drive motor - With saw blades - With intermediate gear Clearance width: 650 mm Clearance height: 90–620 mm Stroke: 500 mm Feed speed: 0–8 m/min Feed power: 3.5 kW Pulleys: 900 mm Total weight: 5.4 t Fits the foundation of the Esterer LD65 sash saw. Has been stationary for around 15 years. Dismantled and stored approx. 3 years ago. Annual cut approximately 3,000 solid cubic meters. Very good condition – immediately available – fully functional Gjdpfxsyhduye Af Soiw Location: Austria, near Graz

Condition: used, Frame saw Pini & Kay FN65 HH Passage width: 650 mm Drive motor: 33 kW with saw blades with suspension with intermediate shaft with splitter wedge Immediately available Location: Austria, near Graz Gijdpfx Afexvz Hzs Sjw

Condition: used, Gatter Saw Sharpening Machine Vollmer CNHV Year of manufacture: 1978 Gatter saw blade width: 60-160 mm Toothing length: max. 1450 mm Tooth pitch: 14 – 40 mm Tooth height: max. 25 mm Rake angle: 0° - 30° Blade thickness: 0 – 6 mm Gjdpfxjxvz R He Af Soiw Grinding wheel: diameter 200 mm Working speed: 30, 50, 75 teeth per minute Tooth forms: 3 pcs Connected load: 2.1 kW Weight: 500 kg Including gatter saw set device Lorroch SGB 6 (similar to Meinert PH6D) year 1983

Condition: used, Exhibition machine stock Roitham – Hans Schreiner bandsaw for wood – HBS-HS 480-400V Technical data: Motor output: 2.75 kW S 6 (2.2 kW at 100% duty cycle), 400 Volt Saw blade width: 6 to 25 mm Wheel diameter: 475 mm Cutting width: 465 mm Cutting height: 290 mm Table size: 630 x 480 mm Tilting table: 45° Blade length: 3607 mm Gijdpjx H Ufusfx Af Sew Weight: 162 kg Sample photo! Price subject to change. Errors and printing or typographical mistakes excepted.

Year of construction: 2004, condition: ready for operation (used), A fully automatic Schüco glazing bead saw is available. Saw blade diameter: 400mm, cutting angle: 45°/90°, motor type: E63SP-2, speed: 2800rpm. On-site inspection is possible. Gedpfowu Ez Nex Af Sjiw

Condition: used, machine/vehicle number: 007975, Position 1: Panel Feeding and Loading FERWOOD CUSTOMIZED-FW DET LINE Position 2: introducer FERWOOD CUSTOMIZED-FW DET LINE Position 3: Double Squaring Machines FERWOOD CUSTOMIZED-FW DET LINE Giodewmw Edepfx Af Sew Position 4: Roller Conveyors FERWOOD CUSTOMIZED-FW DET LINE Position 5: Double Squaring Machines FERWOOD CUSTOMIZED-FW DET LINE Position 6: Panel Stacking and Offloading FERWOOD CUSTOMIZED-FW DET LINE

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 36AMN, compressed air connection: 6 bar, working width: 360 mm, warranty duration: 12 months, operating speed: 420 mm/s, Komfi Laminator Amiga 3680 with HotKnife (NearLine, Generation 1) Showroom Machine, Manufactured 2025 Specifications: Min. paper format: 200 x 250 mm Paper weight: 115 x 600 g/ m2 Gsdpfx Afezh S Ugj Seiw Thickness of sheets max. 0,7 mm: Overlap > 0 Thickness of sheets max. 1,4 mm: Overlap < 0 Suitable kinds of film: Polypropylene, Polyester, Nylon Film thickness: 24-50 μm Inner diameter of film reel: 3“ = 76,2 mm Outer diameter of film reel: 350 mm Output / laminating speed: 3-25 m/min(regard. technological conditions) Maximum output: - Average monthly capacity of machine: 100 000 B2 sheets Max. paper pile: 60 mm / length of sheet < 350 mm 30 mm / length of sheet > 350 mm Max. feeding table load: 20 kg Laminating temperature: according film manufacturer – max. 135°C Sheet overlap tolerance: ±1 mm Max. pressing force (0,6MPa): 15 kN Max. pressing force (0,8MPa): 19,5 kN (WARNING = limited life of the pressure roller) Max. linear NIP pressure, press 0,6 MPa: 60 N/mm / sheet width 250 mm 50 N/mm / sheet width 300 mm 41,6 N/mm / sheet width 360 mm Linear NIP pressure= 30 N/mm: sheet width 250 mm / 0,30 MPa sheet width 300 mm / 0,36 MPa sheet width 360 mm / 0,43 MPa Feeder: Bottom Suction Vacuum Feeder Laminating Unit: Adjustable distance stoppers for lamination unit to enable processing thick substrates and windows lamination. ”On-the-fly” side-adjustable unwinding shaft with adjustable brake force. Height-adjustable and removable spread roller perfectly removes wrinkles from laminate. IR heating for laminating cylinder. Temperature sensor inside the cylinder for precise regulation. Rubber coated pressure roller. The powerful pneumatic pressure system guarantees even nip pressure and perfect lamination results. Separator & Delivery: Decurling unit consisting of bar and roller with position control to move the snapping moment automatically when the position of decurler is changed. Built-in film perforator to enable sheet separation. Cam-driven separation roller with adjustable tearing action, delivery roller and sheet skewing wheel. Fixed delivery desk with adjustable air nozzles.

Condition: new, axle configuration: > 3 axles, permissible axle load (axle 1): 45 kg, permissible axle load (axle 2): 45 kg, permissible axle load (axle 3): 45 kg, loading space width: 3,000 mm, loading space height: 1,170 mm, total width: 3,000 mm, total height: 1,170 mm, suspension: hydraulics, tire size: 215/75R17.5, wheelbase: 1,500 mm, color: red, Year of construction: 2026, Main Features Year: New Universal Gooseneck SH 35/2 Loading platform: 3,700 mm x 2,440 mm 3.5 inch king pin Hydraulic lifting and lowering Hydraulic support cylinders Coupling height: 1,450 mm Integrated lashing points Lashing rings Spare wheel + spare wheel holder Hydraulic locking pin Automatic lubrication for gooseneck with Beka-MAX pump Hatz Diesel PPU Hatz single-cylinder diesel engine (silent pack) @ 9.6 kW 240 L hydraulic oil tank, powder coated 35 l/min flow rate and max. working pressure of 250 bar Three sizes of quick couplers for pressure connection Three sizes of quick couplers for tank connection Electric RPM control THP SL 3 Max. axle load: 45,000 kg per axle Total axle load: 3 x 45,000 kg = 135,000 kg GVW: 135,000 kg Unladen weight: 10,650 kg Payload: 124,350 kg Total length: 4,500 mm Loading platform width: 3,000 mm Height: 1,175 mm (+/- 300) THP SL 4 Max. axle load: 45,000 kg per axle Total axle load: 4 x 45,000 kg = 180,000 kg GVW: 180,000 kg Unladen weight: 13,850 kg Payload: 166,150 kg Total length: 6,000 mm Loading platform width: 3,000 mm Height: 1,175 mm (+/- 300) THP SL 5 Max. axle load: 45,000 kg per axle Total axle load: 5 x 45,000 kg = 225,000 kg GVW: 225,000 kg Unladen weight: 17,250 kg Payload: 207,750 kg Total length: 7,500 mm Loading platform width: 3,000 mm Height: 1,175 mm (+/- 300) THP SL 6 Max. axle load: 45,000 kg per axle Total axle load: 6 x 45,000 kg = 270,000 kg GVW: 270,000 kg Unladen weight: 19,800 kg Payload: 250,200 kg Total length: 9,000 mm Loading platform width: 3,000 mm Height: 1,175 mm (+/- 300) Low Profile Deck FB 300 - 10,000 mm, without mechanical coupling, non-driveable - Payload rating in combination (6+6): 300 t - Height 300 mm, length 10,000 mm, width 2,990 mm - Coupling heads at front and rear for modular use - Bogies for modular configuration - Dead weight approx. 21,300 kg - Incl. hydraulic locking pin for connecting modular bogies lengthwise 1 x Low Profile Deck FB 250 - 8,000 mm, with mechanical coupling, non-driveable - Payload rating in combination (6+6): 170,000 kg - Height 250 mm, length 8,000 mm, width 2,990 mm - Coupling heads at front and rear for modular use - 1x extension for low profile deck, 4,000 mm - 1x extension for low profile deck, 5,000 mm General Information Year of construction: 2026 Axle Configuration Tyre size: 215/75 R17.5 Axle brand: BPW Eco Plus Suspension: hydraulic suspension Center axle 1: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Center axle 2: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Center axle 3: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Center axle 4: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Center axle 5: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Center axle 6: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Functional Deck height: 117 cm Extendable chassis: Yes Gijdox S Evbjpfx Af Ssw Condition General condition: very good Technical condition: very good Visual condition: very good Damages: none Financial Information...

Condition: excellent (used), mileage: 626,000 km, power: 184 kW (250.17 HP), first registration: 03/2012, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 6,180 mm, fuel: diesel, fuel tank capacity: 300 l, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro5, suspension: steel-air, total length: 10,000 mm, total width: 2,550 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, loading space length: 7,650 mm, loading space width: 2,500 mm, loading space height: 2,650 mm, Year of construction: 2012, Equipment: ABS, air conditioning, electric window regulation, power mirror, spoiler, tail-lift, traction control, = Additional options and equipment = - Heated mirrors - Comfort driver's seat - Roof spoiler - Speed limiter - Radio/CD player - Sun visor - Toolbox = Remarks = M.A.N. TGM18.250BL 4x2 CHASSIS WITH PLYWOOD BOX, D'HOLLANDIA DHLM 1,500 KG TAIL LIFT, AS-TRONIC GEARBOX & AIR CONDITIONING (ENGINE PROBLEM!!) 250HP, EURO 5, 6 CYLINDER ENGINE!! (ENGINE PROBLEM!!) AS-TRONIC GEARBOX!! AIR CONDITIONING!! SUN VISOR!! ROOF SPOILER!! ETC.!! MULDER PLYWOOD BOX: DIMENSIONS: LENGTH x WIDTH x HEIGHT: approx. 7.65 m x 2.48 m x 2.65 m (INTERNAL)!! D'HOLLANDIA DHLM 1,500 KG TAIL LIFT!! SIDE DOOR ON RIGHT SIDE!! STAINLESS STEEL TOOLBOX!! ETC!! TRUCK HAS ENGINE PROBLEM AND IS NOT DRIVEABLE, WE CAN TRANSPORT THIS TRUCK FOR YOU!! MORE M.A.N. 4x2 / 4x4 / 6x4 / 8x4 (CONSTRUCTION) TRUCKS IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! Gisdpfxeyfhure Af Sew PLEASE CHECK OUR WEBSITE: SHIPPING, STACKING, TRANSPORT, TRANSIT REGISTRATION OR LOADING? NO PROBLEM FOR US! WE ARE A "ONE STOP SHOP" COMPANY!! YOU CAN ALSO CHECK OUT OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! (?v=G1cTWpn_7kQ) ENGEL TRUCKS; "YOUR GLOBAL TRADING PARTNER" = Further information = Technical information Number of cylinders: 6 Engine capacity: 6,871 cc Transmission Gearbox: AS-TRONIC, 6-speed, automatic Axle configuration Tyre size: 315/70R22.5 Brakes: Disc brakes Front axle: Max. axle load: 7,500 kg; Tyre tread left: 50%; Tyre tread right: 50%; Suspension: leaf spring Rear axle: Twin tyres; Max. axle load: 11,500 kg; Tyre tread left inner: 60%; Tyre tread left outer: 60%; Tyre tread right inner: 60%; Tyre tread right outer: 60%; Reduction: single reduction; Suspension: air suspension Weights Unladen weight: 8,765 kg Payload: 10,235 kg Gross vehicle weight: 19,000 kg Functional Tail lift: D'HOLLANDIA DHLM 1500, tailgate, 1,500 kg Superstructure make: MULDER PLYWOOD BOX WITH LOADING PLATFORM Loading platform height: 110 cm Condition Technical condition: good Optical condition: very good Identification Registration: BZ-TL-02 Further information Please contact Sales Department or Erik Engel for more information.

Condition: excellent (used), first registration: 08/2010, color: green, Year of construction: 2010, Equipment: ABS, = Additional options and equipment = - Central lubrication system = Further information = Extendable body: Yes Technical condition: very good Visual condition: very good Price: On request KAMAG K22 MODULE 12 AXLES WITH GREINER LOWBED FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO SEE OUR VIDEOS OF TRUCKS/COMMERCIAL VEHICLES AND MACHINES OFFERED FOR SALE. Godpfx Afouxycus Soiw WE SPEAK GERMAN WE SPEAK ENGLISH WE SPEAK SPANISH

Condition: new, Year of construction: 2026, Maximize Profit with TRV 1200L and TRV 1600L: From Sawmill to Firewood TRV 1200L Ø550: Efficiency and Speed for Continuous Cutting Optimize waste management and turn production scraps into immediate economic value! The TRV 1200L Ø550, with its advanced design, is the ideal solution for sawmills needing to dispose of large amounts of multilaminate trims and log side sections. The result? A continuous and automated disposal process that converts waste into high-quality firewood. Key Features: Simplified handling: randomly load trims and waste onto the low-wear conveyor/roller VV. Smart clamping system: innovative technology allows processing of overlapping pieces of different shapes and thicknesses. Advanced precision: PLC-automated cutting system with timed length control of trimmed pieces. Independent sectors: equipped with 5 sectors, each with its own pneumatic cylinder and shock absorbers for maximum stability. Gijdsv Ip T Rjpfx Af Sow Enhanced Safety: Advanced protection system: access door to moving parts with forced-lock safety micro-switch. Sealed, non-duplicable security key for exclusive access. Protective tunnel with sealed key and reinforced blade guard for superior safety. Rapid blade motor stop (

Condition: used, Wood sawmill 1/26 Gedpfx Aezkh N Sof Ssiw

Condition: used, Wood sawmill 2/26 Gijdozkh N Eopfx Af Ssw

Condition: refurbished (used), BANDSAW HEADRING Mod. 1300/SG-CFC - Cast iron structure with stabilizing treatment. -right hand design (cutt from right to left!) - Flywheel diameter 1300 mm. - Flywheel width 165 mm for maximum blade width of 180 mm. -Filled flywheels with special ribs to enhance mechanical characteristics, subjected to stabilizing treatment; shaped with double curve for the best stability on the table; perpendicular to the rotation of axis. - 55kW (75 HP) main engine, automatic star-delta starter, pulley, belts and brakes -chains for timber unload HYDRAULIC CARRIAGE CFC - 4 clamps for log centering - Maximum distance from blade to clamp 1000 mm. -Max opening of hooks 900 mm - COMPUTERIZED-Mudata control system - Continuously variable speed feed from 0 - 140 ml/min and exploits the power of the main motor to obtain a quality cut, hydrostatic design -4 turning logs chain systems - Control unit and seat, multi-function joystick and electric servo control !!!!! OPTIONAL !!!!! INSTALLATION..... 40,000 EUR EXCLUDING VAT, FOR A 1-YEAR WARRANTY Mechanization and unloading rollers Log ramp, length 4 m - 20,000 EUR + VAT Log loading arms on the log saw trolley, hydraulically operated with a single cylinder - 20,000 EUR + VAT Roller conveyor - EUR 20,000 + VAT - Length 7.60 m - Width 1.1 m - Rollers Ø 215 mm - Gear motor Second unloading roller conveyor - EUR 20,000 + VAT - Length 7.2 m - Width 1080 mm - Rollers 840 mm - Left/right chains - Own motorization These options significantly increase production flow, reduce downtime, and automate the log exit area. Advantages for industrial production Giodpoxzth Iefx Af Sew - Complete line, fully reconditioned in 2025 - Excellent cutting stability thanks to cast iron construction - Extremely precise positioning with BRUSHLESS servo motors - High productivity and minimal maintenance - Ideal solution for factories wishing to modernize their cutting flow without investing in new equipment

Year of construction: 2005, condition: excellent (used), The subject of the auction is the sawmill line BRODPOL Gsdpfx Ajl H Hy Hsf Ssiw The line consists of a log prefeeder plus a cascade, an input feeder, a BRODPOL TT5/500/320/G circular sawmill with a centering device and a receiver, and a distribution table. - diameter of the processed log 100 - 320 mm - length of processed log 1250 mm - 6000 mm - diameter of circular saws (only) 500 mm - maximum number of saws on the spindle 5 pcs. - feed speed 10 - 28 m/min. - power of main motors 55 kW + 75 kW Hcwgak9s - required connection of pneumatic supply 6 atm. - capacity up to 20 m³ per hour of operation

Condition: used, Working length: 4060mm The traveling trolley size: 650x1700mm Giodeyyhqdopfx Af Sew

Condition: used, Year of construction: 2005, functionality: fully functional, cutting length (max.): 6,500 mm, input voltage: 400 V, - Year of manufacture: 2005 - Electrical diagram - Electric motor: 15 kW - Log cutting length: up to 6.5 meters - Control: stationary control panel - Additional equipment: - Hydraulic loading - Hydraulic hold-down - Hydraulic log turner - Roller adjustment - Debarker (for removing bark prior to cutting) - Dual-function hold-down - Side stops - Leveling rollers Gjdpsyrdg Dsfx Af Ssiw Machine dimensions: - length: 750 cm - width: 220 cm - height: 240 cm - weight ~1700 kg

Condition: used, Small log line with Chipper-canters and single blade splitsaw Feeding / sawing speed 60 m/min. The line consist of below parts: - Conveyor for logs - Centring infeeder with log turner - First chipper-canter for round logs - Out feed conveyor - Block tilter - Infeeder to second canter - Second chipper-canter for blocks - Out feed conveyor - Single blade splitsaw We can also offer the equipment serviced Gjdpfx Ajiiciqef Sjiw

Condition: used, Year of construction: 1969, functionality: limited functionality, control type: manual, actuation type: electric, total height: 2,000 mm, total length: 1,300 mm, total width: 900 mm, overall weight: 450 kg, table length: 600 mm, table width: 600 mm, Bandsaw from Mössner - Type SM 420 Vertical bandsaw MÖSSNER SM 420 A, year of manufacture 1969. Description: - Factory number: 22600-77/14 - with stepless feed - bandsaw welding device IDEAL - machine light - table size approx.: 60cm x 60cm - table adjustable in inclination! - band dimensions: length: 316cm - 326cm max. - overhang approx.: 40cm - space requirement: W x D x H - 1.30m x 0.9m x 2.0m - weight: approx. 560kg Used, with signs of wear! Inspection possible at any time. Machine is disconnected, standing on a pallet and secured with a tension strap. Gedpfx Afezc Hwto Sjiw The machine can no longer be switched on, probably a minor problem. Private sale - without guarantee or warranty.