Used Umaro Vertical Turret Lathe - Single Column for sale (23,464)

Condition: used, Year of construction: 1991, Technical details: Gjdpfx Ageu Nfp Is Roiu pressure: 40 t daylight dimension : table/slide up: 450 mm throat: 375 mm ram stroke: max. 300 mm Table dimensions: 900 x 500 x 85 mm passage inside table: Ø 120 mm height over floor: 900 mm total power requirement: 15,0 kW weight of the machine ca.: 5,8 t dimension machine xH: 2,3 x 1,45 x 2,40 m further technical data: -size of the ram plate W: 900 x D: 500mm -pivot hole in ram Ø 40 x 75mm -Hydraulics: tank capacity approx. 500Liter; operating pressure 275 bar; pump capacity 22,9 l/min. Two-hand operation and/or control panel *

Condition: used, Year of construction: 1960, Technical details: Gsdpfx Aju Nfudeg Rjiu pressure: 10 t throat: 255 mm max. ram stroke: 400 mm ram speed - reverse: 0,180 m/sec. m/sec. ram speed - forward: 0,080 m/sec. m/sec daylight dimension : table/slide up: 630 mm daylight dimension : table/slide low: 230 mm table clamping surface:: 420 x 400 mm passage opening in table: 220 mm surface area of ram: 200 x 200 x 65 mm total power requirement: 1,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 1,1 x 0,5 x 2,1 m

Condition: used, Technical details: pressure: 100 t daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 200 m/s ram speed - reverse: 200 m/s Table dimensions: 750 x 560 x 90 mm Gisdpfxevc Ax Ne Ag Rju passage inside table: Ø 26 mm clamping surface ram: BxT: 530 x 400 mm mortise hole in ram: Ø 50 mm cylinder diameter: Ø 250 mm height over floor: 720 mm total power requirement: 17,0 kW weight of the machine ca.: 5,5 t dimension machine xH: 1,8 x 1,2 x 3,2 m

Condition: good (used), Year of construction: 1963, Vertical lathe Gsdpfevi Hrysx Ag Rsiu JUNGENTHAL Type: DK 1400 built in 1963 with 1 axis digital readout. turning diameter max : 1400 mm face plate : 1250 mm Automatic turret head spindle speed : 3,5-180 rpm feeds : 0,063 - 3,15 mm/rev rapid traverse : 1800 mm/min Further data see data sheet Machine documentation available . Dimensions : Length 4 m Width 2,4 m Height 3 m Weight 16t Good general condition .

Condition: good (used), Year of construction: 1975, Turret lathe HESTIKA Type:HR42 built approx. 1975 Spindle capacity max : 42 mm with turret head and tool holder Multifix Type:B Spindle speed: 88 - 2800 rpm Collet chuck device, coolant device, machine documentation. Gijdpfx Agsvgbqfj Rsu Machine in good condition .

Condition: good (used), Year of construction: 1965, Turret lathe HESTIKA Type: HR32 built approx. 1965 Spindle capacity max: 32 mm with tool turret, collet chuck device, Gsdevgbphjpfx Ag Reiu Spindle speed :200-3200 rpm with coolant device, machine documentation . Good condition Ready for immediate use .

Condition: used, Year of construction: 2011, Vertical Twin-Spindle Turning Center - Siemens 840 D CNC control - VSC 400 Duo machine bed - 2 x disc turrets, 12 station, dia. 40 mm, driven - 2 x additional drilling and countersinking stations - Open workpiece transport system - Transfer and turning unit - Interface for an external handling system - Central high-pressure coolant supply with pump, 70 bar - Air blow-off for pick-up unit and clamping devices - Workpiece measurement system - Tool monitoring - Emag network option - Sister tool management system Swing diameter: 260 mm Gjdpfsy N Snxsx Ag Rsiu X travel: 860 mm Z travel: 200 mm Main spindles: 2 Max spindle speed: up to 4,500 rpm Spindle distance: 1,055 mm Main drive: 2 AC asynchronous motor 60% / 100% duty cycle: 39 / 28 kW Max torque: 460 Nm Rapid traverse (X / Z): 45 / 30 m/min

Condition: used, Year of construction: 2000, gebraucht 2000 070165A prompt, Zwischenverkauf v Italien 27900 € 1 40 to 2.6 mm 650 mm 380 mm 120 mm Gijdpfx Agjyrhpvo Rsu 8 - 78 mm 145 1/min 6 60 mm 40 mm 195 mm 297 mm 800 mm 3 kW 1450 mm 1150 mm 2150 mm 2200 kg Two-hand control panel and foot pedal Work area enclosure with safety switch Additional bolster plate Central lubrication system Stroke counter Operating manual with CE declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, Year of construction: 2026, consisting of: machine base, 2 rotary spindles, SIEMENS Sinumerik S7-1500 control system (see photos), 1 RITTAL SK3185830 control cabinet cooling unit, 1 machine base plate (stored outdoors). Gsdpfoy T N Abox Ag Rsiu

Condition: used, Year of construction: 1979, pressure 100 t stroke 500 mm table surface area 4000x500 mm weight of the machine ca. 5,7 t HY – S 100 RH MAE hydraulic straightening press, complete with straightening unit Year of manufacture: 1979 Approved in accordance with UVV Stroke: 500 mm Gjdpfx Asy Tpr Aog Reiu Pressure capacity: 100 tonnes Table: 4000 x 500 mm Weight: 5700 kg

Condition: not inspected (used), Year of construction: 1999, rand: MORI SEIKI Type: ZL150SMC Year of build: 1998 Turning Ø: 440 mm Spindle boring Ø: 45 mm Speed till n=: 5000 rpm Number of tool changer stations: 24 Chip conveyor: true CNC control, brand, type: MSC501 Manual present: true Machine weight: 7000 kg Terms of delivery: Loaded on truck Giodezagrfopfx Ag Rou

Condition: used, Year of construction: 1976, pressure 20 t throat 185 mm stroke 100 mm Gjdpfxstqqwuo Ag Reiu table surface area 380 x 350 mm dayligth 250 mm table height over floor 840 mm total power requirement 4 kW weight of the machine ca. 1,3 t

Condition: used, Year of construction: 1961, pressure 25 t throat 200 mm stroke 4 - 80 mm table surface area 595 x 410 mm ram adjustment 70 mm no. of strokes 150 Hub/min table adjustable in height 240 mm total power requirement 1,1 kW weight of the machine ca. 1,45 t Gisdjtqqxbjpfx Ag Rou dimensions of machine L x W x H 1,30 x 0,80 x 2,0 m

Condition: used, Year of construction: 1988, pressure 200 t throat 450 mm stroke 30 - 140 mm table surface area 1100 x 850 mm dayligth 500 mm ram surface 800 x 600 mm ram adjustment 110 mm tool hole in ram Durchm. 65 x Tiefe 105 mm no. of strokes 45 Hub/min total power requirement 15 kW Gsdpfevb I Itsx Ag Rjiu weight of the machine ca. 14,2 t dimensions of machine L x W x H 3,18 x 2,09 x 3,05 m

Condition: used, Year of construction: 1976, pressure 100 t throat 315 mm stroke 8 - 112 mm table surface area 725 x 570 mm ram surface 410 x 315 mm ram adjustment 80 mm no. of strokes 55 / 82 Hub/min tool shank hole (depth x diameter) 85 x 50 mm dayligth 355 mm total power requirement 7,5 kW weight of the machine ca. 6 t Gjdpfougnpiex Ag Reiu dimensions of machine L x W x H 2,00 x 1,00 x 2,87 m

Year of construction: 1990, condition: excellent (used), Presskraft 800 kN , Hubverstellung 30 - 240 mm , Stößelverstellung 80 mm , Hübe 30 - 90 / min , Tisch 1.200 x 800 , Durchfalloch 350 x 370 , Stößel 900 x 450 , Aussladung 410 , max. Tisch - Stößel 695 , Auswerfer , Ausweferweg 70 , Stößelgewichtsausgleich , Öl-Luft -Kühlanlage , sichere Steuerung III Höhe 3.600 Breite 1.660 Tiefe 2.400 Gisdpfxjiuxwqe Ag Rju Gewicht 12.100 kg

Condition: good (used), Year of construction: 2008, feed length X-axis: 575 mm, feed length Y-axis: 90 mm, feed length Z-axis: 300 mm, Order No. 3.2-115 1 used CNC Lathe GILDEMEISTER type CTV 160, built 2008 1 used CNC Lathe GILDEMEISTER type CTV 160, built 2008 Gsdpfoubvv Tjx Ag Roiu Siemens 840D control 3-jaw chuck Chip conveyor Coolant device Siemens 840D control 3-jaw chuck Coolant device Chip conveyor Technische Daten / technical details: Drehdurchmesser / turning diameter 160 mm X / x 575 mm Z / z Y/y 300 +-90 mm mm Drehzahlbereich / spindle speed range 6000 UpM / rpm Weight of the machine ca. / weight ca. 6000 kg Technical data, accessories and description of the machine are not binding. Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Year of construction: 2015, workpiece weight (max.): 20,000 kg, spindle motor power: 90,000 W, spindle speed (max.): 75 rpm, turning diameter: 4,000 mm, turning height: 1,900 mm, New 2015. Purchased 2022 for a project was cancelled before commissioning was completed and the machine has not been used in any production after commissioning. Very full documentation is available upon request Main specification details. Turning diameter 3600mm. Maximum turning height 1900mm. Maximum table load 20,000kgs. Table speeds are infinitely variable between 14rpm and 75rpm. Table drive motor 90KW AC. Table torque to 61168NM. Z axis thrust 36000NM. X and Z axes traverse rates 1-5000mm/min. Ram is 320mm diameter Price, ex works UK Midlands £330,000 VTT-WB can quote transport installation and commissioning Gjdpsy Uxdkofx Ag Roiu

Condition: refurbished (used), Year of construction: 1998, functionality: fully functional, feed length Z-axis: 1,000 mm, workpiece weight (max.): 15,000 kg, spindle motor power: 37,500 W, spindle speed (max.): 415 rpm, turning diameter: 2,100 mm, turning height: 1,300 mm, workpiece diameter (max.): 2,100 mm, year of last overhaul: 2026, As with all Millenniums this machine has the wonderful base structure and table drive design that makes all the production wishes possible – the highest accuracy and the highest chip removal When this machine is delivered to the customer it will have been fully serviced and refurbished to ensure those qualities are ready for you to use turning, pcd drilling, rotary contour milling, angle drilling, grinding – see it all on the Millennium films on the website Gijdpjy Uw Sgsfx Ag Reu Only the best machine tools are designed and built with this quality and strength

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance Z-axis: 1,500 mm, chuck outer diameter: 1,800 mm, spindle speed (max.): 315 rpm, turning diameter: 2,000 mm, turning height: 2,450 mm, rotational speed (max.): 3,000 rpm, year of last overhaul: 2026, FOR SALE – 12 MONTHS GUARANTEE – CE MARKED A DORRIES-SCHARMANN VCE2000/180MC-FC CONTUMAT Vertical Turning, Centre for high accuracy heavy cut turning, high precision heavy PCD drilling and continuous rotary milling Delivered in 2002. Condition: Excellent - see INTRO page CNC specification – high level Siemens 840D Hydrostatic crossrail and ram guideways. Cutting and positioning feed rates up to 18m/min Gedoy Uw Emepfx Ag Rsiu A 9-STATION MAGAZINE is for turning toolheads & machining heads. These heads are picked up by the ram during cycle The turning and milling heads are fed by a KELCH DOUBLE GRIPPER TOOL CHANGER, as seen on most machining centres The tool changer collects the turning tools (CAPTO C8) and live spindle tools (SK50) from a WERO magazine The magazine as supplied with this machine originally has the capacity to hold 60 Capto C8 tools and 76 SK50 tools The KELCH toolchanger can change the tools in both vertical and horizontal working positions. This means, for example, that various SK50 tools can be fed into a right angle milling head while it remains on the ram MACHINE SALE POSSIBILITIES The machine specification will be finalized by the purchaser and VTT-WB New guarding will be supplied to match the final specification GUIDE PRICES A – machine without the pallet system but with the full tool changing and tool storage system. New guarding. CE marking 12 months full warranty, including 96% uptime guarantee and 12 months Preventive Maintenance Tool storage capacity can be reduced within this price £525,000 B – machine without the pallet system and toolchanging and storage system replaced with 30 pocket disc type magazine New guarding. CE marking 12 months full warranty, including 96% uptime guarantee and 12 months Preventive Maintenance £540,000 C – machine to original specification including full pallet system and full tool change system New guarding. CE marking 12 months full warranty, including 96% uptime guarantee on machine but excluding pallet and toolchange system £650,000

Condition: refurbished (used), Year of construction: 1998, workpiece weight (max.): 15,000 kg, travel distance Z-axis: 1,000 mm, chuck outer diameter: 1,750 mm, spindle speed (max.): 400 rpm, turning diameter: 2,100 mm, turning height: 1,350 mm, rotational speed (max.): 3,000 rpm, feed force Z-axis: 50,000 N, year of last overhaul: 2026, The Millennium provides very high precision turning and versatile machining capability. Always precise, always powerful. Features of this machine:- – Involute chain drive for very high speeds, very low noise – a 36” diameter Timken cross roller bearing, the ultimate bearing – see last page Gijdoy Uwxtjpfx Ag Rsu – All steel 1750mm dia. 4 jaw chuck for high speeds. Maximum loading 15,000kgs. – A servo powered C axis control that provides backlash free C axis movement – high power and high accuracy – 200mm square forged steel ram - high accuracy heavy cutting when required and incorporating a 15KW ISO 50taper live spindle providing speeds 20 to 3000rpm for rotary contour milling, pcd drilling and angle milling and grinding with attachments (new heads can be provided to order). 1350mm maximum height under ram – Automatic pick up of turning tools, live tools and attachments from the 18 pocket tool magazine – Raise and lower crossrail - high precision latching and clamping at 200mm pitches – flexibility without loss of accuracy Fanuc 18Ti. A very precise, powerful and versatile machine tool. Performs all functions shown in photo gallery 12 months guarantee

Condition: excellent (used), Year of construction: 2003, operating hours: 8,000 h, functionality: fully functional, feed length X-axis: 3,500 mm, feed length Y-axis: 2,800 mm, feed length Z-axis: 1,500 mm, workpiece weight (max.): 35,000 kg, spindle motor power: 120,000 W, spindle speed (max.): 4,000 rpm, turning diameter: 4,000 mm, total height: 3,100 mm, rotational speed (max.): 180 rpm, workpiece diameter (max.): 4,000 mm, Equipment: documentation/manual, A STARRAG DORRIES 2VC2800/280MC-FC-V CONTUMAT High-Production 4/5 AXIS Vertical Turning Centre with Siemens 840D cnc This is not a machining centre with a turning table but a real high power, heavy duty vertical turning machine with the high power turning table on a massive base with guideways to provide a Y axis This configuration enables the machine to turn a round component to its maximum diameter and machine a square component to a similar dimension – and many more possibilities in between If a DS CNC swivelling head would be purchased from DS this machine is ready for huge 5 axis work. Godpfx Ajy Uwg Reg Rjiu For large precise and complex components in these industries this is the perfect ‘one stop’ machine Defence, Aero Engine, Nuclear, Turbines, Rail, Oil and Gas, Pumps, Gearboxes, Rockets etc. 12 month guarantee. PAYMENT PLAN AVAILABLE

Condition: new, machine/vehicle number: DF0189, pressing force: 500 t, pressure:500 t passage width:1200 mm Godpfsfxykaex Ag Roiu stroke:400 mm weight of the machine ca.:40 t dimensions:2800 x 1750 x 4350 mm return capacity:50 t :50 kW Max Working height:800 mm :0 - 10 mm :0 - 10 mm/sec. :400 mm pestle plate:1000 x 1000 mm table plate:1200 x 1200 table height over floor:1200 mm :700 l

Condition: refurbished (used), Year of construction: 2018, machine/vehicle number: DF0150, pressing force: 63 t, pressure:63 t passage width:700 mm stroke:500 mm Gedpfofhcc Ujx Ag Roiu Approx. weight (w/o operational materials):5,1 t Measurements L x W x H:ca. 1500 x1600 x 2995 mm Return Capacity:6 t Engine Output:11 kW Max Working height:700 mm Approaching Speed max. :140 mm/sec Pressure Speed:15 mm/sec. Travel:500 mm Ram plate:600 x 540 mm Table size:750 x 600 mm Table height above ground level:850 mm Oil Tank Capacity:150 l Control voltage:24 V Frequency:50 Hz Siemens Control System:S7 1200 Monitor:Siemens 12 Zoll Special feature: When operating at 260bar the machine reaches a pressure level of 70 tons.

Condition: refurbished (used), Year of construction: 2019, machine/vehicle number: DF0195 - Rev.00, pressing force: 40 t, pressure:40 t passage width:850 mm stroke:500 mm Weight of machine approx.:ca. 3,8 t dimensions:ca.1300 x 1800 x 3200 mm return capacity:4 t pestle plate:600 x 450 mm table plate:750 x 720 mm table height over floor:850 mm Oil cooling (electric):1,5 kW (max) max. working heidht:700 mm motor capacity:12,7 kW Approaching Speed max. :140 mm/sec pressure speed:15 mm/sec Return Speed:140 mm/sec Godpfx Agsfhcc Hj Reiu Oil Tank Capacity:160 l Monitor:WEG - 10 Zoll Siemens Control System:S7 1200