Used Svetruck 15120-38 for sale (2,893)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, CLEANROOM - ISO 8 Fedpfoq H H Ruex Albogg | Cleanroom requirements ISO Class 8 | ISO Cleanroom Class 8 | Cleanroom classification. In order to achieve an ISO 8 air purity class in a Cleanroom, several levels of air filtration are usually used (e.g. G4 pre-filter, F9 filter, H13 final filter). Air movement in the room is non-unidirectional (there is a mixing of "clean" air supplied to the room with "dirty" air present in the room). Air vents in the ISO 8 room are placed on the walls. The required number of air exchanges per hour will depend on the nature of the activities conducted in the room and the number of personnel present, but the goal could be to provide 10-40 air exchanges/hr. In ISO Class 8, personnel are often present continuously. Employees may be dressed in standard work attire and visitors in a disposable apron. It is recommended to maintain a minimum overpressure of the room relative to the adjacent zone of 5-10 Pa. Requirements for equipment and materials intended for Clean Room with ISO air cleanliness class 8 (maximum average amount of particles released when: number of samples taken = 100; measurement performed in accordance with ISO 14644-14 in a cleanliness class at least one better than the purpose of the device; number of particles/m3) Detailed description in photos. Technical drawings attached to photos. Description of ventilation The purpose of the ventilation installation performed was to achieve the following air parameters in the Clean Room. The installation was made with the GBD PHARMA 2000 system, meeting all the requirements for 'clean rooms' in the highest classes of air purity. Parameters for the installation: a. Air purity - ISO 8. b. Temperature 19-23 st C c. Humidity max 38%. a. To ensure the required purity of the supplied air, an air handling unit manufactured by DOSPEL with a maximum capacity of V= 3500 m3/h [up to 15 air changes per hour] was used. The air handling unit is equipped with pocket filters : pre-filters FK EU5/EC2 and fine filters FK-EU9/EC2. In addition, HEPA 11 filters made by EUFILTER were used in diffusers located in the ceiling. Data sheets in point H6. As a result , with a measured flow rate of 3264 m3/h, an ISO 7 [class "C"] cleanliness class of the room was obtained in the resting state, and thus an ISO 8 [class "D" ] cleanliness class for the working state. b. The temperature range of 19-23 deg C is for the enlarged cooler and chiller to be freely maintained with 25% fresh air. c. In order to achieve in summer conditions with high temperatures of 30 deg C and humidity of 80%, a freon chiller of 31.4 kW and a chiller of 33.5 kW of cooling power were used. The chiller is made by FUJITSU supplied by Klimatherm Gdansk. The room is automatically regulated overpressure in relation to the external pressure - the pressure difference at the door : 15 Pa The automation of ventilation allows for "economical" mode , in which the installation works in a closed circuit and an overpressure of 15 Pa is maintained. Technical data attached to the photos.

Condition: excellent (used), Year of construction: 2017, Boy 55A Pro / Operating hours: 16,624 in automatic mode / Machine in very good technical condition Year of manufacture: 2017 Injection unit: Screw diameter: 38 mm Shot weight: 123.9 g Injection pressure: 1508 bar Dosing volume: 136.1 ccm Clamping unit: Clamping force: 55 t Tie bar spacing: 360x335 mm Size of the clamping plates: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Control system: Procan Alpha - Touchscreen Additional equipment: Machine in very good technical condition Operating hours: 16,624 in automatic mode Pneumatic core x 2 Injection unit hardened - bimetal The machine has been regularly serviced by the authorized Boy service center in France. It is possible to change the screw diameter to fi 32 mm or 42 mm. Dimensions: Weight: 2430 kg Length/Width/Height: 3.25x1.14x2.02 m Drive: Pumps/Motor: 11 kW Heating power: 7.7 kW Total power: 18.7 kW All machines offered are started by our service technicians before sale. Fgedszy H Sqjpfx Albeg It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź.

Condition: excellent (used), Year of construction: 2017, Boy 55A Pro / Operating hours: 17,083 in automatic mode / Machine in very good technical condition. Year of manufacture: 2017 Injection unit: Screw diameter: 38 mm Injection weight: 123.9 g Injection pressure: 1508 bar Metering volume: 136.1 ccm Clamping unit: Clamping force: 55 t tie bar distance: 360x335 mm size of clamping platens: 665x600 mm ejector: hydraulic clamping unit: hydraulic Control system: Procan Alpha - touch screen Fjdpozy H S Djfx Albjgg Additional equipment: Machine in very good technical condition Operating hours: 17.083 in automatic mode Pneumatic core x 2 injection unit hardened - bimetal The machine has been regularly serviced by the authorized service boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Dimensions: Weight: 2430 kg Length/width/height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating power: 7,7 kW Total power: 18,7 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: good (used), functionality: fully functional, Year of construction: 2001, operating hours: 13,254 h, load capacity: 3,500 kg, lifting height: 3,500 mm, free lift: 150 mm, load center: 500 mm, fuel type: diesel, mast type: mono, construction height: 2,500 mm, motor manufacturer: Deutz, fork length: 1,200 mm, empty load weight: 6,100 kg, Equipment: cabin, lighting, pallet forks, sideshift, trailer coupling, Still H 35 T - ex German Army (Bundeswehr) Fgodpfjyrdwvex Albeg Manufactured in Germany. Good condition, technically sound and ready for operation. Operating hours have been read off. 13,254 operating hours Full cab Exterior mirrors Heater STVO-compliant lighting 2 rear work lights Standard mast Lifting height: 3,500 mm Overall height: 2,500 mm Free lift: 150 mm Integrated side shifter Forks: 1,200 x 125 x 45 mm - N E W - Forks: 1,200 mm 3rd valve SE tyres Front tyres 80% Rear tyres 80% Technical specifications subject to error. Sale takes place without warranty.

Condition: good (used), Year of construction: 1972, functionality: fully functional, This processing plant is designed for the production of creams, ointments, gels, pastes, lotions, suppository compounds, etc., with a usable volume of 100 liters. The total volume with the container closed is 123 liters; the minimum fill volume is 35 liters. The system consists of a fully enclosed stainless steel container with double jacket, which can be electrically or water heated/cooled. The container features a lid with integrated mixing units and drives. The mixing vessel is mounted on three castors and can be wheeled out for filling or cleaning purposes. The lid is mounted on a lifting column for hydraulic raising and lowering, enabling convenient cleaning and emptying. It is fitted with an observation window and two inlets with valves, which can also be used for adding other product components. Additionally, an adjustable mechanism is provided for setting the grinding gap of the colloid mill. Technical specifications: Fjdpfxsyx Sxcj Albogg Container: Permissible operating pressure: 1 bar / -1 bar Homogenizer: 1,500/3,000 rpm – 1.8/2.5 kW Anchor agitator: 19/38 rpm – 1.8/2.3 kW Spiral agitator: 29/58 rpm

Condition: used, Year of construction: 2007, turning length: 1,000 mm, turning diameter: 600 mm, spindle bore: 115 mm, spindle speed (max.): 2,000 rpm, 2-axis CNC lathe Leadwell LTC-35C Year of manufacture 2007, Taiwan Fanuc OiTC control system Max spindle speed 2000 rpm Gearbox with low/high range Chuck size 380mm Spindle bore 115mm Max turning diameter 600mm Turning length 1000mm Z-axis travel 1100mm Tailstock Fgsdpozh Iwqjfx Albog 12-tool turret Included with the machine: - Documentation - Chip conveyor - Chip tray with pump - Tool pallet

Condition: used, Year of construction: 2015, CMZ TX 66 Y2 Quattro Year 2015 Fanuc 31i control Maximum turning diameter (mm): 255 Distance between spindle centers (mm): 639 Maximum speed (rpm): 4000 Maximum bar diameter: 66 mm X-axis: 190 mm Y-axis: +- 40 mm Z-axis: 500 mm Chuck: 210 mm 2 BMT 55 tool heads 2 spindles 2 Y-axes Spindle bore: 66 mm Tool probe Fsdpfxszp Ituj Albogg Chip conveyor Tooling included Documentation

Condition: used, Year of construction: 2015, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 119, inner diameter: 50 mm, cutting length (max.): 4,000 mm, Paper core production line with a packaging system for cores with an ID of 38-60mm, 12 layers for paper reels, multi-knife cutter (5 knives), gluing section with a heating system for dextrin adhesive. Very good condition – recently serviced. A large number of spare parts included. Fedpfx Ajzul Sfslbsgg

Condition: used, Year of construction: 2021, functionality: fully functional, Sale of complete PVC profile extrusion lines Fjdpszlpabjfx Albsgg We offer for sale 6 complete technological lines for the production of PVC profiles, originating from an operational production facility. The equipment dates from 2011–2025, with some units having undergone major overhauls. The technological lines include: • twin-screw conical extruder Pol-Service Majcher PSMD 65 / PSMD 65/132, • main motor power: 37 kW, • output: approximately 120 kg/h, • calibration table with 2 vacuum tanks (Pol-Service Majcher, Polreplast or Greiner – depending on the line), • caterpillar haul-off with guillotine (Greiner or Gruber Extrusion), • stacking device, • vibrating station for unloading Big-Bags. Key information • 6 complete technological lines, • main motor power: 37 kW, • output: approximately 120 kg/h, • equipment from reputable manufacturers: Pol-Service Majcher, Greiner, Polreplast, Rawotechnik and Gruber Extrusion, • selected equipment after major overhauls, • available technical documentation and CE documentation for selected machines. Purchase options: • single technological line, • several selected lines, • complete machine park, • the entire facility with all production equipment. The price quoted is for one line. A detailed list of equipment, technical parameters, technical documentation and additional photos are available upon request. Location: Lower Silesian Voivodeship, Poland.

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 650 mm, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 1,770 mm, workpiece width (max.): 1,270 mm, workpiece height (max.): 680 mm, feed rate Z-axis: 12 m/min, table load: 7,500 kg, Status: general overhaul Control: Mitsubishi - 64 bit CNC Generator power: 70 Amperes - multipulse Travel ranges (X, Y, Z): 1000 x 1500 x 650 mm Electrode changer: 30-position pick-up rotary electrode changer Working tank (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Accessories: - CO2 fire extinguishing system - Cartridge filter system - HSJ technology (High Speed Jump) The OPS INGERSOLL wire erosion machine GANTRY 1200 HSJ / 64 bit, manufactured in 2006, has undergone a comprehensive and professional general overhaul in our facility and is in very good condition, both technically and visually. During the overhaul, the machine was disassembled by over 70%. All relevant wear parts were carefully inspected. The following overhaul work was carried out on the aforementioned machine: Replacement of ball screw and ball bearings of the X, Y and Z axes. Replacement of all (4) ball screws of the tank drive. Fgodpfx Aljzx Ambjbjg Inspection and testing of the C-axis for tightness and accuracy. Geometric inspection of all axes according to OPS INGERSOLL protocol. Thorough cleaning of the entire machine base. Cleaning of the entire working tank including replacement of the felt scrapers. Complete repainting of the machine. Overhaul of the dielectric pumps. Replacement of all hydraulic and dielectric lines. Replacement of all pneumatic lines. Cleaning of the control cabinet, generator and control system. Replacement of all fans and batteries. Overhaul or replacement of all power supplies, units and servo amplifiers. Laser measurement after the machine overhaul. Finally, the machine was subjected to an extensive erosion test in accordance with the quality and testing specifications of OPS INGERSOLL. The machine is ready for immediate use and is ideally suited for reliable production operation. 09/02.

Year of construction: 2020, condition: like new (used), functionality: fully functional, The Regloplas P140XS temperature control unit is for sale. Medium: Water Heating capacity: 3 kW Cooling capacity: 38 kW Fedpfx Alezvur Dsbsgg Maximum flow rate: 11 l/min Weight: 25 kg Dimensions (W/H/D): 143/420/520 mm

Condition: good (used), Year of construction: 2007, functionality: unexamined, machine/vehicle number: 2601-0324, The Sprint 42 Linear from DMG Gildemeister is a CNC turning/milling center with 6 linear axes and 2 C-axes. Direct drives enable high acceleration and precise machining operations. It is suitable for demanding series production of parts with a bar diameter of up to 42 mm. Year: 2007 Spindles: Main and counter-spindle, each up to 6,500 rpm; bar passage through main spindle 42 mm, counter-spindle 38 mm. Fedpozkgqzjfx Albsgg Tool capacity: 26 stations, including up to 11 driven tools; turret with Y-axis for milling and threading operations. Axes / Travels: Slide 1: X1 = 65 mm, Z1 = 350 mm, Y1 = 120 mm Slide 2: X2 = 326 mm, Z2 = 320 mm, Y2 = 265 mm Rapid traverse rates: up to 30 m/min (X1, Z1, X2, Z2), Y2 up to 18 m/min Control system: FANUC 160i-TB with 15" DMG SlimLine panel Including IEMCA Boss 545-E bar feeder The IEMCA Boss 545-E bar feeder (Type 32 LL, year of manufacture 2007) is included in the scope of supply and enables the continuous feeding of material up to Ø 42 mm. It operates with 400 V / 50 Hz and requires 6 bar of air pressure; its own weight is approximately 860 kg. Main spindle newly bearing: The main spindle has already been overhauled (new bearing). Inspection & Collection: An on-site inspection is possible. If you are interested or have questions about technical details, please do not hesitate to contact us.

Condition: good (used), Year of construction: 2014, first registration: 06/2014, fuel type: diesel, color: red, fuel: diesel, Swingo 200 + - 4 wheel steering - Dutch Registration Year of manufacture: 30-6-2014 WSVS462S2E1730012 TZR-38-N = Further information = Intended use: Internal logistics Permissible total weight: 4,500 kg Technical condition: good Visual condition: good Fjdjzzq I Ejpfx Albogg Registration number: TZR-38-N Contact VAEX The Truck Traders for more information.

Condition: used, TECHNICAL DETAILS - Bar diameter : 45 [mm] - Bar length : 3800 [mm] - Max. scrap length : 150 [mm] - Loading time : 22 [sec] Fgjdpozbnb Rsfx Albeg POWER SUPPLY - Supply voltage : 400 [V]

Condition: used, TECHNICAL DETAILS - Bar diameter : 45 [mm] - Bar length : 3800 [mm] - Max. scrap length : 150 [mm] - Loading time : 22 [sec] Fjdpfxozbncbj Albogg POWER SUPPLY - Supply voltage : 400 [V]

Condition: used, Year of construction: 2009, functionality: fully functional, torque: 12,000 Nm, workpiece length (max.): 5,500 mm, workpiece width (max.): 170 mm, workpiece height (max.): 200 mm, total height: 2,000 mm, total length: 8,000 mm, total width: 1,800 mm, table length: 6,400 mm, overall weight: 1,800 kg, number of slots in tool magazine: 12, type of input current: three-phase, Stroj u urednom stanju, spreman za rad. Za više informacija, kontakt . Fjdszi Ukaspfx Albogg Hvala.

Condition: ready for operation (used), sheet width 2025 mm plate thickness 3.0 mm distance between columns 2050 mm no. of strokes 38 Hub/min Fedpfjzzrflsx Albegg cutting angle 1.38 ° Control konv. total power requirement 4.0 kW weight of the machine ca. 1100 kg dimensions of the machine ca. 2299 x 2000 x 1130 mm Current new price: approx. 20.000 euros From a maintenance workshop Special price available upon request Features: - Robust / high-performance electromechanical sheet metal shear - Manual material backgauge * Infinitely variable adjustment range * Adjustment from the rear - via handwheel * Includes mm scale - 1x side stop - 3x front support arms - 1x freely movable foot switch - rear sheet metal chute - front sheet metal removal for smaller workpieces - digital piece counter - control cabinet - mounted on the front left

Year of construction: 2004, condition: excellent (used), Stainless Steel Fermenters / Storage Tanks - 39,000 L - Food Grade These ASTM 304 stainless steel tanks are highly versatile and ideal for the industrial storage or fermentation of wine, spirits, distillates, and craft beer. They are also perfectly suited for the essential oil industry to store floral waters (like rose or lavender distillate) and for water treatment facilities requiring large-capacity hygienic storage. Their conical bottom design ensures 100% full drainage and effortless cleaning, making them highly efficient for various food-grade and liquid processing applications. Fsdozud Irspfx Albogg • Quantity: 6 units • Capacity: approximately 38 m3 (38,000 liters) each • Type: Vertical stainless steel tanks • External dimensions: • Diameter: 2.80 m • Height: 7.20 m • Material: Stainless steel (food grade), ASTM 240 type 304 / AISI 304 • Last used: 2017 • Condition: Good, stored empty • Location: Rosenovo, Sredetz Municipality, Burgas region, Bulgaria • Suitable for: wine, juice, beer, edible oils, food & beverage liquids or other liquids (they have been used for wine storage). PRICE IS PER UNIT. Available as a full lot or individually (Full lot price is 7000 EUR per unit). Loading assistance possible.

Condition: used, Year of construction: 2013, functionality: fully functional, The Tsugami B0385L is a powerful, CNC-controlled long-bed lathe (Swiss type) with the following special equipment: - Dust extraction system - Fire protection system - Chip conveyor Technical data: - General overhaul 2020 Main and counter spindle Fgjdpszizufsfx Albeg • Max. machining diameter: Ø 38 mm • Bar capacity: Ø 8 mm to Ø 38 mm • Max. turning length: 100 mm (without guide bushing) • Max. turning length with guide bushing: 300 mm • Main spindle speed: 200 – 6,000 min⁻¹ • Counter spindle speed: 200 – 6,000 min⁻¹ • Main spindle motor power: 7.5 / 11 kW • Counter spindle motor power: 3.7 / 5.5 kW Tool holders and axes • Total number of tool positions: 21 (standard) • Driven tools (cross-working): 200 – 5,000 min⁻¹ (power approx. 1.0 to 1.4 kW) • Tool shank size: 20 x 20 mm • Rapid traverse speeds: 32 m/min Control system: Fanuc 0i-TD Machining capacities (maximum values) • Max. drilling diameter (main spindle): Ø 13 mm • Max. threading (main spindle): M12 • Max. drilling diameter (counter spindle): Ø 12 mm • Max. drilling diameter (cross tool): Ø 10 mm Dimensions and weight • Machine dimensions (W x D x H): approx. 2,520–2,770 mm x 1,345–1,515 mm x 1,970–2,050 mm • Weight: approx. 4,600 kg

Condition: used, Year of construction: 1993, functionality: fully functional, total height: 2,200 mm, total width: 2,500 mm, total length: 2,800 mm, type of input current: AC, overall weight: 4,500 kg, input voltage: 380 V, nominal power: 38 kW (51.67 HP), NOMOCO VSRS-280 CNC 4 – Centerless CNC cylindrical grinding machine Fgedpfsyr Sh Aex Albjg We are offering a NOMOCO VSRS-280 CNC 4 centerless cylindrical grinding machine, manufactured in 1993, in very good condition and fully functional, for sale. The machine is currently in operation and can be inspected on-site after prior appointment. This provides the opportunity to directly verify the machine's function and current technical condition. The Siemens CNC control system, as well as the CNC-controlled X, Y, Z, and C axes, enable precise and reproducible machining. The machine is particularly suitable for industrial applications where a reliable and economical solution for centerless cylindrical grinding is required. Technical Highlights Manufacturer: NOMOCO Model: VSRS-280 CNC 4 Year of manufacture: 1993 Machine type: CNC cylindrical grinding machine, centerless Control system: Siemens CNC-controlled axes: X / Y / Z / C Condition: Used, very well-maintained overall condition Availability: Immediately Inspection: Possible by appointment Machine currently in operation Axis configuration Axis Function X-axis Infeed slide Y-axis Truing spindle S Z-axis Truing slide S C-axis Support U-axis Support R W-axis Truing slide R Dimensions & Weight Overall length: approx. 2,800 mm Overall width: approx. 2,500 mm Overall height: approx. 2,200 mm Weight: approx. 4,500 kg Electrical connection data Operating voltage: 380 VAC / 50 Hz Rated current: 100 A Connected power: 38 kW Condition & Inspection The NOMOCO VSRS-280 CNC 4 is currently in operation. The overall condition is considered to be very good for its year of manufacture. An on-site inspection and functional test are possible after prior appointment. Availability: immediately If you are interested, have technical questions, or would like further information, please do not hesitate to contact us.

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, OPS INGERSOLL GANTRY EAGLE 800 Year of manufacture: 2022 Fjdpfxsyzxd Do Albegg Overhauled: June 2026 Excellent condition, low operating hours (1540 hours of erosion time) EAGLE Powertec PC/NC control system 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn rapid programming Powertec handheld multifunctional control unit Manual erosion with Powertec handheld EAGLE Powertec - fine and rough machining generator PT 60, 60 amps (60 amps peak current) High-speed jump max. 18,000 mm/min. Travel ranges (X, Y, Z) 550 x 850 x 450 mm Linear measuring system in all axes Distance table / electrode holder min. 135 mm / max. 585 mm Electrode changer, 20-position pick-up disc magazine Work tank (W x D x H) 800 x 1,100 x 480 mm Work table (W x D) 760 x 1,000 mm Load capacity 2,000 kg Overhang load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: Erowa, type UPC production chuck CO2 fire extinguishing system

Condition: used, Year of construction: 2002, Nordson Heißleim Gerät 3400 V 2002 capacity / hour ca.: 1500 Fodpfx Alezzpk Sobsgg Strom / Volt: 380

Condition: used, MAZAK QTN 200II MSY Year: 2007 Y-axis Counter-spindle Parts catcher Tool probe Max. diameter: 380 mm Max. length: 538 mm Fgsdpfxezvn Ife Albeg Max. bar capacity: 65 mm 12-position turret X-axis: 230 mm Y-axis: 100 (+/- 50) mm Z-axis: 575 mm W-axis: 585 mm Interface for bar feeder Hainbuch chuck on the main spindle Included with the machine: - Chip conveyor - Documentation - 11 collets, including 4 driven collets (2/2)

Year of construction: 2024, condition: used, functionality: fully functional, The iCombi Classic is the latest combination steamer from RATIONAL. The iCombi Classic 20-1/1E model is a true all-rounder and will quickly become an indispensable helper in your kitchen. It replaces numerous conventional cooking appliances and is robust, powerful, efficient, and high-performing. The appliance offers space for 20x1/1 GN containers. The combination steamer has been fully refurbished in our in-house workshop and is therefore fully functional and free of defects. It comes with a 6-month warranty on all electrical components. These are sample photos of an identical model series in comparable used condition; actual photos will follow shortly. Fgsdpfxszy Uvws Albsg Request your best price. The MSRP is €21,940 net. The appliance is available from approximately week 38. You will receive an invoice with VAT shown. Our equipment service for you: •6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs •High-quality branded equipment at fair prices •Professional and competent advice – before and after the purchase •Free shipping within Germany (excluding islands/mountain stations) •Provision of operating instructions, connection diagrams & spare parts •Trade-in of your combination steamer from model year 2004 onwards •Complete range of accessories at attractive prices Condition: Used, inspected, and fully functional Technical data: •W x D x H: 877 x 913 x 1872 mm •Power connection: V: 400 / Hz: 50-60 •Electrical power: kW: 37.2 •Weight: 246 kg •Capacity: 20x1/1 GN •Serial number: E21MJ24083162984 •Year of manufacture: 2024 Special features: •ClimaPlus – the active climate management system: humidity in the cooking chamber is continuously measured and adjusted for optimal cooking quality with low energy consumption / humidity is adjustable in 10% steps for precise manual cooking •3 operating modes: steam, hot air, combination – automatic cleaning and maintenance system for cooking chamber and steam generator Additional information: •Control knob for operating modes, temperature, core temperature, and time settings •Acoustic and visual signal for necessary user interventions •4.3-inch TFT color display with softkeys •HACCP data memory and output via USB •Temperature display adjustable in C° or °F, display of target and actual values •Active climate management in the cooking chamber ClimaPlus •100 individually adjustable cooking programs with up to 12 steps each •Program steps can be adjusted during operation •High-performance fresh steam generator for optimal steam performance even below 100°C •5 programmable fan speeds •LED lighting with strong, neutral light in the cooking chamber •Integrated, maintenance-free grease separation system without additional grease filter •Cool-down function: rapid cooling of the cooking chamber •Delta-T cooking for particularly gentle preparation •Automatic adjustment to the installation location •Removable, pivoting hanging racks •USB interface for transferring settings to other cooking systems •Material inside and outside made of stainless steel DIN 1.4301 •Core temperature probe with 1-point measurement integrated •Protected against spray and jet water IPX5 Shipping: •Delivery or self-collection by arrangement •Worldwide shipping on request •Shipping to islands or mountain stations only by arrangement Subject to changes and errors.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, clear span: 995 mm, total length: 9,535 mm, total height: 4,500 mm, load capacity per storage section: 50 kg, hole spacing: 25 mm, shelf height: 4,500 mm, Technical specifications of the shelving: - Manufacturer: Mecalux GmbH - System type: M3 picking shelving as an aisle system Fodozzalyspfx Albegg - Overall height: 4,500 mm (1 shelving unit with a height of 4,150 mm) - Load levels: 12 (including the base) - Shelf load: 50 kg per shelf - Aisle level at a height of 2,150 mm, load-bearing capacity 350 kg/m², floor made of 38 mm chipboard - Access staircase: 11 steps, 1,000 mm wide - Uprights galvanized, shelves cathodically dip-coated (RAL 5003 sapphire blue) - Shelf dividers: Each level has 1 Sendzimir-galvanized shelf divider. Condition: Professionally operated, well-maintained storage system, fully functional and in good overall condition. Important: Dismantling and removal are the responsibility of the buyer. Technical documentation and support for scheduling will be provided.