Used Stas Agrostar V8 / V9 /V10 *Neufahrzeug* Ab 45M³ for sale (19,225)

Condition: new, Randek intersection saw SPL728 Computer controlled, revolving, with LAN (Ethernet) connection for downloading or storing sawjobs (text file in ASCII format). The number of programs that could be stored is limited only by the size of the hard disk. Through the graphical touch screen (HMI), the operator is able to track all details directly on the screen or direct the saw directly to minimize disruptions in the production run. Sawblade: Heart metal, low noise, 700 mm Ø / 116 teeth, 360 ° horizontal swivel, 90 ° -28º inclined, 250 mm entry depth Engine performance 7.5 kW. Automatic closed-lock plastic protective screen. Lhodsfg Tatspfx Afajf Supply bank, selectively 4.0 / 5.8 / 8.2 / 10.6 m long Driving role, IRO4-120, driven. Transport roll 76 mm Ø, roll length 400 mm, roll spacing C / C 500 mm. Return value 120 mm. Pressing device, pneumatic, 2 piece Select direction from left or right. Delivery bank, optionally 5.8 / 7.0 / 8.2 / 9.4 / 10.6 / 11.8 / 13 m long Computer controlled rolling stock type LX. Execution guide, rollers 76 mm Ø, length 400 mm. Hinged hooks 120 mm. 2 computer-controlled longitudinal locks, driven by gear belts. Hump ​​1 - designed for cutting lengths up to 50 mm. Note 2 - runs over the entire length of the carrier bank. The positioning of the longitudinal abutment and the setting of the cut angle requires independent computer control. Maximum speed of longitudinal contact 1 m / s. Wooden furniture: 1 piece Return devices: 2 pieces Direction: select from left or right

Condition: new, Year of construction: 2026, functionality: fully functional, BS10U 80° 1-table solution is used when producing open panels, curtain walls or other open component (floor, roof). Available in lengths: 6000 mm, 7500 mm, 9000 mm, 12 000 mm. Can be equipped with a number of options: Hole beams, adding flexibility in production of building elements Lsdpsx Tdtnofx Afajhf less than 2250 mm in height or when producing angled shaped walls etc. Hydraulic squaring instead of the standard solution Pneumatic squaring. Extended width adjustment in production of elements higher than 3100 mm (< 3650 mm). Rollers for transport elements in horizontal position enables production lines with BS20 system.

Condition: used, Year of construction: 1962, functionality: fully functional, Adolf John Hanau AB II Timber saw Wood saw Trimming saw center height 105mm, column throat 650mm, 160mm width, conveyor belt 5-45m/min From first owner ! Weight with conveyor approx. 1250Kg Connection to 400A 32A Used, functional condition Ledpfjuprqwjx Afaohf

Condition: used, machine/vehicle number: 1, empty load weight: 8,000 kg, maximum load weight: 30,000 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 10/2005, next inspection (TÜV): 10/2020, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 92 m³, suspension: air, tire size: 385.65 r 22.5, color: red, Year of construction: 2005, Equipment: ABS, tail-lift, stas 92m3 semi-trailer, 21-slatted moving floor ideal for waste with hydraulic adjustable sealed tailgate and closed roof for 2\3 , 3 disc axles with 3rd steerer, walkway in header, year 2005, overhauled until 31.10.2020-CONCESSIONARY INTERDRIVE SRL-PARMA Ledjh I Id Nepfx Afaehf

Condition: new, maximum load weight: 29,560 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,600 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, loading space volume: 60 m³, Equipment: ABS, Stock no. 5640 Purchase, lease, or lease with a purchase option by arrangement! Approximately 60m³ STAS agricultural moving floor trailer with integrated grain hopper / service door, etc. ---- * Manufacturer: STAS Ledpfx Afoxl Ntueajhf * Model: FARMSTAR - Agricultural Moving Floor * First Registration: - (New vehicle) * Colour: Chassis RAL 9005, Superstructure RAL 7001, Tarp SIO 7500 * Volume: approx. 60m³ (10.60m long x 2.48m wide x 2.30m high) * Axles: 3x SAF axles / 1st axle with lift and traction assistance / disc brakes * Tyres: 385/65 R22.5 with Speedline Diamond aluminium rims * Wheelbase: 6.25m * Suspension: Air suspension with raise/lower functionality * Gross Weight: 36,000 kg * Unladen weight (manufacturer): 6,440 kg * Payload: 29,560 kg * ABS / EBS * CARGO FLOOR CF 500 SL-C with radio remote control and control panel rear left * 21-plank floor system, 6mm ribbed * Aluminium end caps, welded * Rear closure plate made of aluminium * Integrated grain hopper * Additional guides under the floor profiles * Residue emptying wall with brushes and stainless steel handles * Bulkhead made from aluminium plank profiles * Service door in the bulkhead * Smooth side walls inside and outside (grain specification), fully welded * Inspection window in the left rear side wall * Swing doors (50/50 split) * 4x locking rods * Swivelling crossbar at door closure * Hydraulic connections at the front with 3m hoses and * Connection option below the superstructure (without hoses) * Pressure 1" female * Return 1" female * Operator platform with access front left and right * Fifth wheel height 1,150mm * Individual mudguards * Full load supports * Rolling tarp (900g/m²) with quick-clamp system * Aluminium roof bows, foldable * Foldable rear aluminium light guard * Aluminium air tanks * 1x toolbox front left * 1x toolbox rear right * Shovel & broom holder left * 1x 2x8-step aluminium access ladder fixed right * 1x extendable ladder at the rear right * Smartboard * TPMS tyre pressure monitoring * LED rear lights – 5-chamber * 2x LED work lights in front of the axles * 2x LED reversing lights at the rear * 1x LED work light inside the bulkhead * 2 x 3-function lamps at the top of the door crossbar Purchase, lease, or lease with a purchase option by arrangement! Notice regarding possible errors in the advertisement: Despite careful preparation of this listing, occasional errors may occur in the text or information provided. We assume no liability for mistakes, changes, or prior sale. All information is subject to change and not guaranteed. Please contact us to verify details or if you have any questions.

Condition: excellent (used), Year of construction: 2007, operating hours: 21,676 h, functionality: fully functional, pressing force: 78 t, filling opening width: 750 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 25,000 kg, transport height: 3,000 mm, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), empty load weight: 25,000 kg, volume flow: 930 m³/h, operating pressure: 250 bar, How do you do? We are pleased to offer you a used baler of the manufacturer Presona AB, type LP 80 VH1. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer Presona AB, Sweden Type LP 80 VH1 Year of manufacture 2007 Total operating hours, 21,676 hours, as of November 2024 Main press force 78 t Lhsdpfx Aevgrh Uefaef Specific pressing force 95 N/cm² Pressing force of prepress flap 28 t Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Throughput capacity under operating conditions 410 m³/hour Bale dimensions 1,100 x 750 mm Drive power 55 kW Tying 5-fold vertical Hydraulic oil tank volume 1,000 L Baler dimensions assembled with hopper 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight press approx. 25 t Note: The machine was used by a recycling company to compact paper, cardboard and film. The press is in good condition, in operation until January 2025 and can be inspected by appointment. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: excellent (used), Year of construction: 2014, operating hours: 37,656 h, functionality: fully functional, pressing force: 85 t, filling opening width: 1,500 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 650 kg, overall weight: 25,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2024, volume flow: 410 m³/h, transport width: 2,400 mm, transport length: 9,300 mm, Hello, We are offering you a used baler from the manufacturer Presona AB, type LP 85 VH1, subject to availability. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot guarantee their accuracy or completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours, as of March 2025 Main press force: 85 t Specific press force: 100 N/cm² Pre-press flap force: 28 t Feed chute dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Lhjdpev T I Evofx Afaef Drive power: 55 kW Tying system: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Press weight: approx. 25 t Note: The machine was used for compaction at a recycling plant. Used for the production of paper, cardboard, films, and plastics such as bottles, buckets, canisters, and drums. The press is in good condition. Many wear parts and entire assemblies have been replaced over the past three years. The machine has been regularly serviced. We would be pleased if this press is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: used, empty load weight: 7,590 kg, maximum load weight: 28,410 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2021, loading space volume: 92 m³, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, | STAS moving floor | Type S300ZX, grain chute, radio | 7mm floor Extrem durabright | Toolbox with air hose, 2 lift axles | Air suspension, spare wheel holder | Empty weight 7,590 kg, payload 28,410 kg | Tires: 385/65 R22.5 | Jost axles with disc brakes Seller: Christopher Glock German/English Mobile: Whatsapp) Mail: christopher. Entire stock at: Hofgasse25, A-4063 Hörsching | Errors, input, and pre-sale excepted. | Sale only to businesses Ljdpswqqy Aofx Afajhf

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, stroke length: 215 mm, throat depth: 410 mm, bending force (max.): 85 t, distance between stands: 1,750 mm, working length: 2,050 mm, TECHNICAL DETAILS Press force: 85 t Bending length: 2,050 mm Distance between uprights: 1,750 mm Stroke: 215 mm Throat depth: 410 mm MACHINE DETAILS Control: DELEM Dimensions & Weight Machine dimensions (L x W x H): 2,700 x 2,100 x 2,400 mm Weight: 7,900 kg EQUIPMENT Two-hand operation 2 support arms Side safety doors Lhjdpfx Afjxxq T Noaef Lasersafe Fissler Wila tool clamping system Die shifting Crowning Tool cabinet

Condition: good (used), Year of construction: 2000, machine/vehicle number: 883454, Offer 25515 Technical data: - Max. working width: 1040 mm - Max. material thickness (at 40 kg strength): 3.5 mm - Table width: 300 mm - Throat depth: 100 mm - Working height: 880 mm - Front angle stop - 3 additional front support arms - Rear stop manually adjustable: 5 – 550 mm - Drive: 400 V / 5.5 kW - Electric foot switch Lhsdpfex E Rfbsx Afaof - Required space including rear stop, without front support arms: approx. W 1500 x H 1250 x D 1400 mm - Weight: approx. 1400 kg

Condition: good (used), Year of construction: 1999, machine/vehicle number: 883345, Offer 25513 Technical Data: - Max. working length: 2050 mm - Distance between uprights: 1750 mm - Max. pressing force: 850 kN Lhsdpfx Ajx Exzkefaof - Distance table/ram: 535 mm - Throat depth: 410 mm - Ram stroke: 365 mm - Stroke speeds: - Rapid downstroke speed: 200 mm/sec - Return speed: 135 mm/sec - Pressing downstroke speed: 1 - 11 mm/sec - Total drive power: 13 kVA - Space requirement approx.: W 2700 x H 2900 x D 2100 mm - Weight approx.: 9100 kg Equipped with: - 5-axis CNC control DELEM, DA - Y1 + 2; X; R; Z - Two-hand control panel with foot switch - CNC-controlled crowning system - CNC-controlled backgauge with height adjustment 5 - 860 mm - Hydraulic tool clamping - Pneumatically assisted die table displacement

Condition: reconditioned (used), Year of construction: 2015, operating hours: 28,748 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), volume flow: 350 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Lodpfx Afovn Tg Ijashf Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Lhedjvwlqqepfx Afaef Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, year of last overhaul: 2024, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Lhjdpfx Asu Thhrsfaef Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the turbulator replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2001, functionality: fully functional, Press force 85 t, Bending length 2050 mm, Distance between uprights 1750 mm, Control DELEM, Stroke 215 mm, Throat depth 410 mm, Total power 13 kW, Weight 8,750 kg, Machine dimensions 3190 x 2100 x 2375 mm Lodpfx Afjw Imq Rjaehf

Condition: used, Year of construction: 2013, operating hours: 1,700 h, Used Filling Monoblock Alfatek for olive oil 1500 bph Lodpfjwiu Rvsx Afajhf General Features of the Used Filling Monoblock Alfatek for Olive Oil 1500 BPH The ALFATEK MBV 9/1 VOLUMETRICA SABRY filling monoblock, built in 2013, offers an efficient and reliable solution for bottling edible oil. It operates at a speed of 1500 bottles per hour, with clockwise rotation and a fully automated workflow. In fact, the machine currently runs in active production, having completed approximately 1700 operating hours. Moreover, it includes all safety protections, user manuals. Container Compatibility and Supported Formats The Used Filling Monoblock Alfatek for Olive Oil 1500 BPH handles a wide variety of containers. Specifically, it works with both PET bottles and metal cans, supporting the following formats: PET 138x138xh253 mm PET 148x148xh320 mm PET 81x81xh236 mm PET 63x63xh184 mm Cans 150x92xh192 mm Cans 150x92xh261 mm Cans 149x120xh315 mm Consequently, the machine adapts easily to diverse packaging needs. Whether the production involves small household bottles or larger industrial formats, this monoblock provides the required flexibility. Additionally, this versatility reduces the need for multiple machines, optimizing both space and investment. Filling Section: Volumetric Technology The filling section of the Used Filling Monoblock Alfatek for Olive Oil 1500 BPH uses 9 volumetric valves. These valves deliver accurate and repeatable dosing, which is especially important for high-viscosity products like olive oil. Notably, the system uses fixed valves and operates in a non-isobaric configuration. Therefore, it suits still liquids and avoids the complexities associated with pressurized systems. Furthermore, the volumetric method helps maintain product integrity while minimizing waste and overfill. Press-On Capping: Compatibility and Sizes The machine applies plastic press-on caps using one capping head, which supports multiple cap dimensions: Ø51.5 x 23 mm Ø37.5 x 22 mm Ø38 x 20 mm Because it handles non-threaded necks, the monoblock accommodates a wide range of container shapes typically used for edible oil. Additionally, the press-on capping system simplifies maintenance and allows for fast format changes. As a result, it ensures both high efficiency and reliable sealing performance. In short, it delivers consistent closure without the need for threading or torque control. Output per Format and Electrical Specifications Depending on the bottle size, the Used Filling Monoblock Alfatek for Olive Oil 1500 BPH achieves varying output rates: 2000 bph for 0.5L and 1L 1500 bph for 2L 1400 bph for 3L 1200 bph for 4L 1000 bph for 5L Thus, the machine performs efficiently across all common olive oil packaging formats. In terms of power, it operates on 415 Volts and 50 Hz, complying with industrial electrical standards. Despite its robust capabilities, the monoblock weighs only 300 kg, making it compact enough for mid-scale facilities. Moreover, its design facilitates both installation and relocation when needed.

Year of construction: 2007, condition: good (used), functionality: fully functional, Paint drying chamber MEYER AB / Fanmet OY 17m3 Year of construction 2007 )2009 installed ) Manufacturer MEYER OY Finland was used for drying lacquered furniture parts. Feeding with tray trolleys Length 3600mm width 2150mm height 2200mm approx. 17m3 electric heating total power 30 kw 18 heating units, each with 1667W, 400 V (length 2360mm) Air flow: 3m3 /sec or 10,000m3 /hour Inner cladding galvanized sheet steel 2 VEM fan motors ( 3,6kW+0,37kW ) ATEX Ledpfxott Sy Re Afashf Thermostat 0-120C Overheating protection 0-210C ATEX compliant 94/9/EC CE marked

Condition: used, Bandsaw Lhodpfx Aswv S Acsfajf Manufacturer: Waco Jonsered AB Model: Bandresaw BK60 Year: 2015 Weight 8000 kg Feed speed: 10-60 m/min Max. cutting height: 300 mm Max. distance sawband to fence side: 235 mm Max. width of the feed unit: 400 mm Min. distance sawband to sawband: 10 mm Feed rollers, diameter: 165 mm Feed rollers, height: 300 mm Saw wheel, diameter: 1080 mm Saw wheel, width: 100 mm Saw band, cutting speed: 42 m/sec Saw motors: 22 kW Feed unit (frequency converter): 5,5kW

Condition: like new (used), Year of construction: 2015, operating hours: 6 h, functionality: fully functional, machine/vehicle number: 17284006, total width: 1,000 mm, total length: 2,800 mm, total height: 1,580 mm, overall weight: 125 kg, input voltage: 230 V, air demand: 12 m³/h, air pressure: 7 bar, power: 0.5 kW (0.68 HP), input frequency: 50 Hz, Equipment: documentation/manual, A semi-automatic tube filling machine MF10A manufactured by Medipac AB. The filling capacity is approximately 24 tubes/minute. When the magazine for filled tubes is full (approx. 10 tubes), the machine switches to standby mode, and when the filled tubes are removed from the magazine, the machine automatically resumes operation. This allows for easy operation by a single operator. The machine is equipped for ø25mm tablets and tubes with ø29mm outer diameter; other formats available upon request. Documentation (in English) is available. Lhjdpfexqf Rmsx Afajf

Condition: ready for operation (used), Year of construction: 2014, operating hours: 800 h, functionality: fully functional, machine/vehicle number: 310712, overall weight: 9,000 kg, load capacity: 8,000 kg, input voltage: 400 V, type of input current: three-phase, warranty duration: 3 months, Equipment: documentation/manual, stove, Large incandescent stove sold with trolley. Lhodeulu Nujpfx Afaef Manufactured by Electro Heat Sweden AB.

Condition: new, maximum load weight: 27,976 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,150 mm, loading space width: 2,330 mm, loading space height: 2,290 mm, loading space volume: 55 m³, Year of construction: 2025, Equipment: ABS, Stock no. 5627 Immediately available! Purchase, rental, or rent-to-own options according to agreement! Approx. 55m³ Stas steel tipper trailer for scrap / swing doors / alloy wheels / immediately available ---- * Manufacturer: Stas * Model: Ferrostar - Steel Tipper Trailer * First registration: - (new vehicle) * Gross weight: 36,000 kg * Unladen weight (manufacturer): 8,024 kg * Payload: 27,976 kg * Axles: 3x SAF axles / 1st axle lift axle / starting aid / disc brakes * Suspension: Air suspension with raise & lower function * Tyres: 385/65 R 22.5 on Speedline Diamond alloy rims * Volume: approx. 55m³ (10.15m length x 2.33m width x 2.29m height) * Colour: Chassis RAL 9005, Body RAL 9005, Sliding cover SIO 7999 * EBS * Swing door (split 1/2 to 1/2) with additional pneumatic locking * Full surround rubber seal for swing door Lodpfx Ajxpb Ufofaehf * 1x slide in the right-hand door * Tipper entry front left inside * Aluminium platform at the front with left-side access * Central clamping system for tarp securing * 2 roof bows (1 mid, 1 rear) * Aluminium sheet for tarp protection * Coupling height: 1.20m * Floor: 5mm HB450 * Side walls: 4/3mm HB450 * Front wall: 3mm HB450 * Rear wall: 3mm HB450 * Automatic lowering during tipping * Load gauge * Wabco Smartboard * Approx. 2.80m aluminium ladder on the right * Single mudguards * Aluminium full-load landing legs as drop legs * Shovel and broom holder on the right * 1x toolbox on the left * 1x LED work light on the left * 1x LED work light on the right * LED reversing lights * LED taillights * Folding underrun protection * Tyre pressure monitoring (Wabco Trailerpulse) * "A" sign plate Immediately available! Purchase, rental, or rent-to-own options according to agreement! Notice regarding possible errors in the advertisement: Despite careful preparation of this listing, errors may occasionally occur in the description or details. We accept no liability for mistakes, changes, or prior sale. All information is subject to change without notice. Please contact us to verify details or clarify further questions.

Condition: used, overall weight: 39,000 kg, first registration: 01/2013, next inspection (TÜV): 07/2025, Equipment: ABS, Volume tipper 59 cubic meters Full aluminum Empty weight 7570 kg SAF axles with disc brakes Tires 60% Good condition Belgian registration Price 23,900 euros net Ljdpfsvwhvpjx Afajhf

Condition: excellent (used), Year of construction: 2011, 1 x Oil Mist Extractor Absolent AB A mist 10C with HEPA filter Year of manufacture: 2011 In very good condition. The extraction unit can be inspected at our warehouse. Lhedjtp Thbepfx Afasf

Condition: new, Year of construction: 2024, color: blue, new (ONE-WAY) 20FT HIGH CUBE DV 9'6" container Internal dimensions: 5.90 x 2.35 x 2.70 m (LxWxH) 5 lashing rings on the left and right floor and ceiling Colour: Blue (RAL: 5013) Lhedpfsvitzbsx Afaef 3 units available = Further information = Year of manufacture: Sept. 2024 Model year: 2024 Tare weight: 2,240 kg Payload: 28,240 kg Gross weight: 30,480 kg Dimensions (L x W x H): 6056 x 244 x 290 cm Overall condition: very good Technical condition: very good Visual condition: very good

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, -Panama tarpaulin 900g -10 mm floor -V-plates 2000x1500x4 -Service door on the front wall -12 pairs of lashing eyes in the front wall Chassis: Reinforced version with continuous chassis, new structure manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and strength, cross member 140 mm high reinforced version Axle and suspension "disc brake 22.5" Jost axle units version, 3*9 tons with DCA - air suspension, lifting and lowering, Wabco Smartboard, electronic brake wear system BVA, 1st axle with traction aid (without tractor unit equipment) Tires and wheels 6 wheels with tires of size 385/65 R 22.5 premium tires Ww. on steel rims, 11, 75*22.5 ET 120 Seat post mech. Support winches, 2x20 ton support load Braking system EBS E-system Wabco with RSS system (Roll Stability Support) and Premium Modulator, spring brake system acting on two axles with operation at the rear Electrical system According to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint integrated in the aluminum rear end, 24 volt system with 1*15-pin and 2*7-pin socket, with side outline lights in LED design 2 separate LED reversing lights integrated in the U-protection, Structure/trough: "structure fully welded inside" reinforced side walls Aluminum trough, side walls 30 mm thick ALU plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, ALU front wall with 600 mm plank profile 2-3 mm thick in straight design, with 2 ALU wing doors 50/30 mm thick, running residual emptying wall with Kevlar tarpaulin approx. 1,500 mm long plus side with Kevlar ? plan seal Hydraulic system: ?Cargo ? Floor? sliding floor system Sliding floor system in the floor with hydraulically moved ALU ? profiles on ALU ? Square profiles with approx. 880 PE-HD sliders, type CF 8 mm floor version, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, operating pressure 190 - max. 240 bar, ALU end pieces welded into the moving floor, without hydraulic hoses Ledpfx Asfi Nmpsfajhf Accessories: 6 PVC fenders with 2 anti-spray mud flaps, 1 ALU E wheel holder, side aluminum collision protection in foldable version, 1 tool box approx. 860*460*400 mm in plastic, 3.7 m aluminum ladder, roll-up tarpaulin approx. 660gr./m2 with roll-up tarpaulin system including roll-up slats if required with side. Tension belts or with quick release, walkway on the front wall with access, 3 steel bows with locking mechanism that can be swung out and locked, aluminum protective cover with hinges that can be folded down for lighting, etc... +590¤ transfer costs Empty weight: approx. 7,700 kg Offer and images subject to change