Used Sharpener Sharpener For Band Saws for sale (10,889)

Condition: new, Year of construction: 2026, Automatic and manual operation – continuous operation or trigger control possible Hydraulic arm drop adjustment – ​​smooth feed control without the risk of overload Cutting angle range: -45° to +60° – quick adjustment without disassembling the material Powerful 1500/1100 W motor (2/4-pole) – high performance even with thick profiles 2 belt speeds: 34 and 68 m/min – adapted to the material type Stable construction – 285 kg – zero vibration, high precision Quick clamp vice – quick material changeover in mass production Pump-based cooling system – extended belt life, improved cutting quality Automatic shut-off after cutting 400 V | 3-phase power supply | 50 Hz Motor power 1500 / 1100 W Belt speed 34 / 68 m/min Belt dimensions 2740 × 27 × 0.9 mm Belt pulley diameter 305 mm Cutting angle range 45°L | 30°L | 15°L | 0° | 15°R | 30°R | 45°R | 60°R Coolant pump 45 W Coolant tank capacity 16 l Net weight 285 kg Noise level 68–71 dB Credpjyi Uq Uefx Akcjb

Condition: good (used), Year of construction: 1962, large band saw with 1250 mm roller diameter with center cutting device Crsdpfx Ajfnh T Iekcjb 45 kw motor roller width 120 mm with electr. saw blade tensioning the upper wheel has been removed for transport very good condition because little run was overhauled in 1997

Condition: good (used), Year of construction: 2001, Bandsaw with 700 mm wheel diameter, low hours of operation Csdpewt Dccjfx Akcorb

Condition: used, Year of construction: 2015, machine/vehicle number: 23811.15, functionality: fully functional, The machine is used but operational. It has been in our metalworking shop since 2015 and is being sold due to the closure of the company. We are selling the saw with two stops. Credpoy Eg Ifsfx Akcob

Condition: new, Year of construction: 2026, The CORMAK MCB350HD cutter in this segment of machines is the largest cutter with very large cutting capacity of 350x260. It has a more powerful engine and a convenient control panel. Machine arm made of one-piece cast iron with additional ribs for greater rigidity. Reversible cutting angle from -45° to 60°. Machine characteristics The CORMAK MCB350HD metal band saw with CE enables cutting in a plane perpendicular to the axis of the cut material or at any angle in the range from -45 to +60 degrees. The cut piece can be fed manually or through any feeding device. The feed during cutting is gravitational based on the principle of oil flow in a two-chamber hydraulic cylinder. The operator starts the machine by pressing the start button and sets the cutting speed. When the cut is complete, the machine automatically stops and the operator raises the arm manually to the starting position. Crjdei D Di Sepfx Akcob Feeding is done manually. This model is used for both unit and serial production, and due to its robust construction, it can cut a wide range of materials, including stainless steel, tool steel, solid materials and profiles. The device enables angular cutting of the material by turning the arm to the left and right. The cutter arm made of a uniform cast iron together with the 27 mm wide cutting band used in this cutter allows you to fully perform multi-series cuts of both profiles and solid materials. The arm is equipped with an automatic blade tension sensor, it is tilted by 25 degrees, which increases the life of the blade. A cleaning brush is attached to the bottom of the arm for perfect blade cleanliness and function. The drive of the machine is transmitted through a worm gear filled with gear oil. The machine has a three-phase motor with double windings and two cutting speeds. Motor thermal protection. This cutter has a very large range of work when cutting at an angle from 45º to the left to 60º to the right. The machine has two speeds of the cutting band: 32 and 72 m/min. A cutter with an automatic, smoothly adjustable, gravitational arm feed downwards. Construction: the frame, vice and rotating table are cast iron. Closed emulsion cooling system with fluid distribution to the blade guides. The machine is equipped with a bumper with a ruler for setting the length of the cut material. At the back of the machine there is a roller feeding the material to be cut. Safety during the cutting process is ensured by an electrical installation that meets all CE requirements. The machine has a limit switch that stops the machine after the cutting process is finished, an emergency switch, the so-called "safety mushroom", a series of microswitches that turn off the machine when, for example, we open the cover of the belt transmission or the cover of the cutting band. Technical data MINIMUM CUTTING DIAMETER - ø5mm MINIMUM LENGTH OF MATERIAL IN VISE - 100mm DISTANCE OF THE VISE BASE FROM THE GROUND - 940mm CUTTING BAND DIMENSIONS - 2950x27x0.9mm TOTAL POWER - 2.2kW TAPE SPEED - 36 / 72 m min-1 DRIVE/PULLEY DIAMETER - 330mm DIMENSIONS - 2000x1330x2020mm WEIGHT - 540kg ANGLE PIPE PROFILE SQUARE 0º-- ø270 350 × 240 260 x 260 45º R ø230 230 × 150 210 x 210 45º L ø200 200 × 170 170 x 170 60º R ø140 140 × 140 140 x 140 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, functionality: fully functional, Band saw for metal with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description CORMAK BS 128HDRC band saw for metal with optimal cutting range, designed for professional craftsmen, distinguished by efficiency and easy handling. Arm swivelling in both directions is a very big advantage in angled cutting. Despite small dimensions, its big weight (103 kg) makes it very stable and vibration-free during cutting larger materials. Element cut can be fed manually or via feeding machines. Feed during cutting is gravitational, with oil flow in a two-chamber hydraulic cylinder. Arm lowering control is ensured by a valve controlling oil flow between chambers of cylinder. Straight cut is achieved by a set of bearings guiding the band. Machines are equipped with a limiting switch and ON/OFF switch compliant with IP54. Swivelling saw frame for double bevelling within -45o - + 60o. Technical data Crodpowq A Dyofx Akcob Cutting band size 1640×13×0.65 mm Cutting speed 23/34/54 m/min Power 0,55 kW/230V Arm lowering control stepless, through hydraulic cylinder Cutting range -45° - + 60° Dimensions 942×442×548 mm Weight 103 kg Maximum cutting range [mm] Angle 0°.....ø125 mm.....100×150 mm....100×100 mm -45°.....ø90 mm.....90×75 mm.....90×90 mm +45°.....ø90 mm.....90×75 mm.....90×90 mm +60°.....ø55 mm.....55×55 mm.....55×55 mm Default equipment 3rd generation hydraulic cylinder Table for vertical cuts Quick-clamping vice Coolant system Workpiece limiter - bumper Automatic limiting switches Modern thermal engine protection Mobile base with four wheels User manual The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, Year of construction: 2011, functionality: fully functional, power: 3.73 kW (5.07 HP), cutting height (max.): 440 mm, cutting width (max.): 600 mm, pivoting range: 60 °, total height: 1,700 mm, total length: 2,900 mm, total width: 1,300 mm, overall weight: 1,320 kg, Equipment: CE marking, We offer this used semi-automatic band saw TOP-PORĘBA BMT460DSA, year of manufacture 2011. Motor power: 5 HP Crsdpfx Ajyv Ai Hokceb Cutting diameter at 90° (round cross-section): 460 mm Cutting dimensions at 90° (square): 460 x 460 mm Cutting dimensions at 90° (rectangle): 440 x 600 mm Cutting diameter at 45° (round cross-section): 445 mm Cutting dimensions at 45° (square): 445 x 445 mm Cutting diameter at 60° (round cross-section): 295 mm Cutting dimensions at 60° (square): 295 x 295 mm Blade dimensions: 41 x 1.3 x 5330 mm Machine weight: 1320 kg If you have any questions or require additional information, please send us a message or contact us by email.

Condition: reconditioned (used), Year of construction: 1991, functionality: fully functional, total height: 2,000 mm, total length: 2,000 mm, total width: 2,000 mm, saw band length: 4,115 mm, saw band width: 41 mm, Fully hydraulic high-performance bandsaw in heavy-duty construction, featuring a horizontally parallel-moving saw band, designed for cutting profiles, tubes, and solid material of all qualities, including extremely difficult-to-machine materials (such as titanium, Inconel, Hastelloy). Suitable for use with bi-metal and carbide-tipped saw bands. Saw unit manufactured in solid polymer concrete, ensuring maximum running smoothness and extended saw blade service life. The saw unit is guided via a vertical and a round-column guide (double-column guide), with hardened and ground guide rails. Hydraulic saw band tensioning and hydraulically preloaded carbide saw band guides. Material clamping is achieved via two hydraulic vises. The machine operation is user-friendly. Cutting length can be set using a hand wheel, with a resolution of 0.1 mm. Piece count is set via a piece counter; upon reaching the set quantity, the machine switches off automatically. Material feed is executed by a feed cylinder, ensuring the highest cutting accuracy. The machines are easy to operate and work fully automatically. Model: SSB 260 VA Cutting capacity: 260 mm x 260 mm (Ø 260 mm) Technical Data: Bandsaw KASTO Bandsaw Automatic Machine Crjdpfexc D Egjx Akcob Machine Type: SSB 260 VA Technical Data: 2-column guided Year of manufacture: 1991 Cutting range: 260 x 260 mm Drive power, saw gearbox: 4 kW Drive power, auxiliary units: 6.5 kW Cutting speed: 15-125 m/min Saw feed hydraulics: Infinitely adjustable Saw blade dimensions: 4115 x 41 x 1.1 mm Feed length: 600 mm Maximum feed (multiple feed): 5400 mm Material support height: 850 mm Machine dimensions: Length/Width: 1690 x 1900 mm Height: 2030 mm Machine weight: 2100 kg Accessories: - Chip conveyor - Coolant system - Multiple feed - Side guide rollers - Machine roller conveyor - Adjustable side guide rollers - Prepared for bundle clamping device - Multiple feed counter

Year of construction: 1995, condition: ready for operation (used), Saw band length: 3010mm, cutting diameter: 270mm, table height: 950mm, connected load: 2.2kW, control panel: PRATICO II CEB, weight: 1.3t. An on-site inspection is possible. Crjdpfx Akoy D Trbscob

Condition: excellent (used), Year of construction: 2013, cutting diameter 400 x 260 mm saw band length 4640 mm cutting width 400 mm Crodpoymqwlofx Akceb total power requirement 8 kW weight of the machine ca. 2,2 t dimensions of the machine ca. 2,6 x 1,8 x 1,8 m

Condition: used, Year of construction: 1985, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, type of input current: three-phase, total height: 1,250 mm, total length: 1,800 mm, total width: 650 mm, overall weight: 1,000 kg, cutting range flat at 90° (X-axis): 400 mm, cutting range flat at 90° (Y-axis): 400 mm, cutting range round steel at 90°: 400 mm, saw blade length: 650 mm, Cutting capacity round: 400 mm Cutting capacity square: 400 x 400 mm Cutting capacity rectangular: 380 x 300 mm 3 stroke rates: 40/62/90 strokes/min Saw blade dimension: 650x50x2.5 mm Crodpfx Ajymdizokcjb

Condition: new, Year of construction: 2024, Radial Band Saw Cedpfx Asmbbivjkcjrb

Condition: used, length ~ 600 mm width ~ 700 mm Crsdpfx Aksulfftjcob height ~ 1.000 mm saw-blade dia. max. ~ 300 mm Sharpening machine cut-off saw for sharpening small circular saw blades.

Year of construction: 2017, condition: used, machine/vehicle number: 6705 104 160, Power: 6 kW, weight: 2,200 kg, 1 roller conveyor, length: approx. 500 cm, 2 heavy-duty dollies, 1 extensive batch of saw bands, various versions, approx. 67 pieces, mostly as new, 1 chair Cedpfoyztd Eox Akcerb

Condition: new, 2-column automatic bandsaw Manufacturer: METALLKRAFT Model: HMBS 340 CNC CALIBER Item no. 3693090 Cutting range, round: 340 mm Saw blade dimensions: 4,600 x 34 x 1.1 mm Crsdpfx Aksyzqwpsceb Standard equipment includes: - Band tension monitoring - Hydraulic saw feed - Feed monitoring - Powered chip removal brush - Swivelling control panel - Chip conveyor - Chip container - LED machine light - Coolant system - Operating manual

Condition: used, Year of construction: 1982, Technical details: Cedpfoyzpknox Akcorb dimensions of saw-band: 3920 - 4050 mm throat: 500 mm workpiece height: 400 mm table - inclinable: 15 - 30 Grad Cutting height: 400 mm band speed: 15 - 940 m/min Table dimensions: 800 x 820 mm mm machine weight approx.: 1000 kg dimension machine xH: 1,3 x 1,3 x 2,2 m

Condition: good (used), Year of construction: 1999, Used Danobat bandsaw Type CR 260 AF CN Max. cutting capacity 90°: 260 mm Max. sawing capacity 45°: 270 mm Crsdpfx Aoyzfzcekcsb Blade length: 4520 mm Blade width: 34 mm Cutting speed: 90 m/min Motor power: 3 kW Excluding roller conveyors

Condition: used, Year of construction: 1971, roll diameter 300 mm throat 450 mm Crsdpewhqtdsfx Akcjb table height 480 mm saw band length 3350 mm width of saw-band 10 mm total power requirement 2,2 kW weight of the machine ca. 520 Kg dimensions of the machine ca. 1,00 x 0,70 x 1,85 m Saw for body parts made of sheet metal, plastic etc good accessibility of the saw blade, guided freehand. Cutting speed infinitely variable up to 1000 m/min Tape welding device IDEAL BS00

Condition: ready for operation (used), Year of construction: 2009, machine/vehicle number: 832016, power: 4 kW (5.44 HP), input voltage: 400 V, Used Hema bandsaw in very good condition for cutting rolls of foam and plastic. Technical documentation and user manual available. Crsdpey Dgddjfx Akceb

Condition: good (used), Year of construction: 2007, machine/vehicle number: 609086, Offer 26074 Hydraulically-operated, double-column-guided horizontal band saw automatic machine Technical data: - Cutting capacity at 90° round: 260 mm - Cutting capacity flat: 260 x 260 mm - Maximum single stroke of material feed: 600 mm - Maximum cut length in multiple strokes: mm (not specified) - Saw band dimensions approx.: 4100 x 32 x 1.2 mm Cedoyn Ikropfx Akcerb - Infinitely variable cutting speed: 12 - 100 m/min - Infinitely adjustable cutting pressure: 0 - 10 m/min - Hydraulic material clamping with adjustable clamping pressure - Coolant system - Chip conveyor - Total drive power: 400 V / 8.5 kW - Required space approx.: W 2350 x H max. 2340 x D 3050 mm - Weight approx.: 1900 kg - Infeed roller conveyor: 1500 mm

Condition: used, Year of construction: 1993, cutting speed 15 - 125 m/min cross cutting section 260 mm band length 4.115 x 41 x 1,1 mm cutting width 260 x 260 mm Band Saw | KASTO - SSB 260 VA The machine is in a well-maintained condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Cedjywzxcepfx Akcsrb #Tags: SSB260VA | SSB-260VA | SSB260 VA | SSB 260VA

Condition: used, Year of construction: 1989, cutting speed 15 - 125 m/min cross cutting section 260 mm² band length 4.115 x 41 x 1,1 mm cutting width 260 x 260 mm Band Saw | KASTO - SSB 260 VA The machine is in a well-maintained condition. Crsdpfxeywzw Sj Akceb Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: SSB260VA | SSB-260VA | SSB260 VA | SSB 260VA

Condition: like new (used), Year of construction: 2015, functionality: fully functional, power: 5.5 kW (7.48 HP), type of input current: three-phase, cutting height (max.): 650 mm, cutting width (max.): 1,050 mm, overall weight: 4,300 kg, empty load weight: 4,300 kg, coolant pump power: 120 W, cutting range round steel at 90°: 650 mm, cutting range square steel at 90°: 650 mm, height adjustment type: hydraulic, roll diameter: 650 mm, saw blade length: 8,330 mm, saw drive: 5,500 W, Excellent working conditions Crodsxwch Nopfx Akcob

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, control type: manual, total height: 1,900 mm, total length: 1,950 mm, total width: 750 mm, overall weight: 230 kg, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, Metal Band Saw BS 260G Technical Data Built-in coolant system: Yes Blade size [mm]: 2455 × 27 × 0.9 Blade tension: Mechanical (manual) Blade speeds [m/min]: 36, 72 Feed speed [m/min]: 0–50 (stepless feed) Arm descent adjustment: Stepless – hydraulic cylinder Vice base height [mm]: 1010 Power supply: 3-phase 400 V Motor power [kW]: 1.1 Dimensions [mm]: 1950 × 750 × 1900 Weight [kg]: 230 Warranty: 24 months Manual (DTR): Polish language CE declaration: Yes Product Description The horizontal metal band saw with a swivel arm allows cutting perpendicular to the axis of the workpiece as well as at any angle in the range 0°–60°. The material can be fed manually or using any mechanical feeding device, while the cutting feed of the blade is fully automatic. The blade guides are equipped with special carbide plates and bearings, which significantly improve blade guidance, durability, straightness, cutting accuracy, and overall cutting quality. The rigid saw arm is made of profiled cast iron, ensuring high stability and vibration reduction during cutting. A control panel is mounted on the machine frame for easy operation. The drive from the electric motor to the blade drive wheel is transmitted through a worm gear transmission. The cutting blade is tensioned on two cast-iron wheels using a manual tensioning system and guided in adjustable rolling and sliding carbide guides. Inside the machine there is a separate coolant tank with an electric pump, which improves blade life and cutting performance. The cutting speed (arm descent speed) is controlled by a hydraulic cylinder, while the feed rate is adjusted directly from the control panel. The machine offers two blade speeds: 36 and 72 m/min. When the arm reaches its lowest position after cutting, the blade drive automatically stops. Cjdeyr Ndhspfx Akcjrb Safety is ensured by: protective blade covers micro-switches stopping the motor when the cutting cycle is completed or a guard is opened an automatic shutdown system in case of blade breakage Applications MTP BS260G band saws are professional machines designed for cutting: steel profiles solid bars and shafts They are equipped with a hydraulic cylinder, coolant system, and swivel arm up to 60°. When combined with high-quality blades from the German manufacturer Roentgen, the machine ensures high cutting precision, quality, and efficiency. The band saw is suitable for cutting: carbon steel alloy steel structural steel stainless steel acid-resistant steel Delivery to the customer is possible. Shipping costs are calculated individually by the transport company.

Condition: used, Year of construction: 1995, cutting diameter 280 mm saw band length 4200 mm cutting width 280 x 280 mm dimensions of saw-band 4200 x 34 x 1,1 mm cutting speed 18 - 115 m/min multiple feeding 0 - 6000 mm power capacity 3,0 kW voltage 400 V Cedpep Rai Ejfx Akcerb total power requirement 5,0 kW weight of the machine ca. 2,3 t dimensions of the machine ca. 2,35 x 2,40 x 2,00 m - serial-no.: 6082 - control: SIEMENS COROS - OP 15 - chip conveyor - multiple feeding - coolant equipment