Used Schuler Gb15-5 for sale (58,846)

Condition: used, mileage: 743,961 km, power: 293 kW (398.37 HP), first registration: 03/2007, fuel type: diesel, tire size: 385/55, tire condition: 60 %, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, total length: 5,950 mm, total width: 2,520 mm, permissible axle load (axle 1): 7,100 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2007, Technical information Number of cylinders: 6 Engine capacity: 12.780 cc Axle configuration Tyre profile: 60% Crsdpfx Aioziz Hheled Front axle: Tyre size: 385/55; Max. axle load: 7100 kg Rear axle: Tyre size: 315/70; Max. axle load: 11500 kg Weights Empty weight: 8.095 kg Carrying capacity: 10.505 kg GVW: 18.600 kg Max. towing weight: 50.000 kg Interior Number of seats: 2 Maintenance APK (MOT): tested until 04/2027 Identification Registration number: BS-TT-20

Condition: excellent (used), fuel type: diesel, first registration: 01/2026, Year of construction: 2026, operating hours: 4 h, Drive: Track CE mark: yes Technical condition: very good Crsdpfxeq Ulauo Ailjd Visual appearance: very good

Condition: used, functionality: fully functional, mileage: 301,436 km, power: 331 kW (450.03 HP), first registration: 07/2023, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Technical specifications Cjdpfx Aoyta S Eoilord Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Truck Data Center 7. Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps. MirrorCam Tyres Information Front left - 5 mm Front right - 5 mm Rear left inner - 5 mm Rear left outer - 5 mm Rear right inner - 5 mm Rear right outer - 5 mm

Condition: new, mileage: 100 km, power: 130 kW (176.75 HP), fuel type: diesel, fuel tank capacity: 100 l, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 4, emission class: euro6, suspension: steel, number of seats: 3, loading space length: 5,000 mm, loading space width: 2,400 mm, loading space height: 400 mm, Year of construction: 2025, Equipment: ABS, AdBlue, Bluetooth, USB port, air conditioning, airbag, central locking, crane, cruise control, electronic stability program (ESP), fog lights, immobilizer system, lane keeping assist, non-smoking vehicle, onboard computer, power assisted steering, power mirror, tachograph, traction control, truck registration, Technical Data * Brand: IVECO * Model: Daily 70C18 * Vehicle Category: Fixed box body 5000 x 2200 x 400 * Year of manufacture: 2025 * Emission standard: Euro 6 * Engine displacement: 2999 cc * Engine power: 180 hp * Fuel type: Diesel * Cabin color: Grey * Wheelbase: 4750 mm * Gross vehicle weight: 7200 kg * Suspension type: Reinforced parabolic springs * Twin rear wheels * Axle configuration: 4x2 * Transmission type: Manual * Cabin type: Day cab, 3 seats * Air conditioning: Automatic * Air-sprung driver's seat * ABS: Yes * Hydraulic crane HYVACRANE HB40 – E3 COMPONENTS / PERFORMANCE STANDARDS: ▪ Crane designed and built using finite element method, ▪ Crane structure made of top quality Swedish steel, ▪ Crane manufactured according to the latest applicable standards EN12999, group HC1-HD4. ▪ CE-marked crane with stability system, CRANE BOOM AND BASE: ▪ 3 hydraulically extendable arms (marked grey), ▪ 370 degree slewing angle (slewing via rack), ▪ Mechanical slewing limiter ▪ Centralized base lubrication system ▪ Swivel hook at the end of the boom CRANE CONTROLS: ▪ Ergonomic control panels on both sides of the crane with emergency stop. Safety, ▪ Cross control (identical lever arrangement) on both sides of the unit, SUPPORT LEGS: ▪ Outrigger beam mechanically extensible, span 3.41 m, ▪ Outrigger legs can be rotated manually by 180 degrees. ▪ Hydraulically lowerable/raiseable outriggers ▪ Swivel-mounted outrigger pads, ▪ Independent control of outriggers on both sides, HYDRAULIC SYSTEM: ▪ Hydraulic oil tank with hydraulic oil temperature indicator, ▪ WALVOIL distributor, ensuring very high working precision, ▪ Hydraulic locks on all crane cylinders, Crane Technical Data Manufacturer: HYVA Model: HB 40E3 Lifting capacity 3.83 m – 995 kg 5.18 m – 715 kg 6.53 m – 555 kg Crjdpfx Aijziw Ubjljd Technical specifications Lifting moment (tm): 3.81 Max. lifting capacity (kg): 995 Max. outreach (m): 7.88 Max. lifting height (m): 10.51 Slewing angle (°): 370 Oil tank capacity (l): 30 Max. oil flow (l/min): 16 Operating pressure (bar): 215 No hidden fees with us: - Delivery charges €0 - Documentation €0 - COC €0 - First inspection €0 Financing, leasing, cash payment MORE INFORMATION: Premium Kfz Outlet GmbH Fichtenhöhe 3 02829 Schöpstal OT Ebersbach Germany We are at your service: Mon.-Fri. from 9:00 to 17:00 On Saturday by appointment wir sprechen deutsch we speak English говорим по-русски mówimy po polsku

Condition: new, HOUFEK SPB Buldog 5 RC wide belt sander Cedpsu R Szmjfx Ailjrd -Exhibition machine- Includes: - HOUFEK SPB Buldog 5 RC wide belt sander Working width: 1,350 mm Includes: - Grooved steel roller Ø 160 mm HOUFEK Including: - HOUFEK segmenter sanding pad electronically controlled, for width 1,350 mm Sanding pad PS 50 E Includes NC control with 10.1" touchscreen Frequency converter for the sanding unit 3-18m/s Automatic table positioning Two-zone interval blow-off device with Nozzle oscillation for sanding belt cleaning - new exhibition machine -

Condition: used, Year of construction: 2008, Infrared dryer, consisting of: Module 1: - 3 IRM lamps with a power of 3500 watts/lamp - Structure made of painted sheet metal. - Installed electrical power 10.5 kW Module 2: - 2 IRM lamps with a power output of 3,500 watts/lamp Csdpswub Uxjfx Ailerd - Structure made of painted sheet metal. - Installed electrical power 7.0 kWTotal connection approx. 19.5 kW/400 V/50 HzExhaust air: - Exhaust air fan approx. 1,800 m³/h - Supply air/room air approx. 1,800 m³/h - Extraction nozzle D160mm ROLLER CONVEYOR - Celfa - Year of manufacture 2008 - Steel rollers with heat protection tape wrapped around - Roller spacing 160 mm - Feed via hand wheel adjustment - Installation length 2,000 mm - Feed approx. 3 - 7.5 m/min. - Including control cabinet - 400V/50Hz

Year of construction: 2026, condition: used, Tank capacity: 270 l Maximum flow rate: 0.92 m³/h Credpfxsyq R Ape Ailsd Motor power: 5.5 kW Refrigerant dryer: Yes

Condition: used, Year of construction: 2008, Working width: 260 mm Working height: 130 mm Number of working spindles: 5 Spindle arrangement: bottom, right, left, top, bottom Grooved bed: yes Motor power bottom spindle: 5.5 kW Motor power right spindle: 5.5 kW Motor power left spindle: 7.5 kW Motor power top spindle: 7.5 kW Motor power bottom spindle: 7.5 kW Bottom spindle adjustment: handwheel Right spindle adjustment: handwheel Csdpfxoyhgkds Ailerd Left spindle adjustment: handwheel Top spindle adjustment: handwheel Cutterheads: Centrolock Feed speed: stepless Feed roller pressure: pneumatic Current consumption: 50 A Current consumption: 71.7 A Motor brake: automatic Extraction connection: Machine length: Machine width: Weight: 4500 kg

Condition: new, Year of construction: 2024, Working width: 380 mm Working height: 150 mm 1. Unit, rotor group: Group of 5 oscillating rotary brushes, Ø 115 mm, each with a 3 kW motor 2. Unit, brush: Scotch Brite Hard / diameter 210 mm, variable drive Crjdpfx Aistnf Rrsled Height adjustment: handwheel Height display: mechanical counter Feed speed: 4 - 12 m/min Feed motor power: 0.37 kW Vacuum conveyor belt: yes Machine length: 1400 mm Machine width: 900 mm Weight: 500 kg

Condition: used, Year of construction: 1974, OVERVIEW Complete isobaric glass bottling and linear pressure-sensitive labelling line, capable of outputs up to 4,000 bottles per hour (bph). The line is specialized for carbonated beverages into 0.33 L long-neck glass bottles. The heart of the line (Schilpp filler) underwent a comprehensive engineering overhaul and complete reconditioning in 2019 by master specialist Petr Markl, updating its core mechanics, feed systems, and electronics to meet modern production safety standards. The line is paired with a modern 2019 Enos labelling machine. Due to a sudden company closure, this line is now available immediately in an immaculate, turnkey operational state. Technical Specifications Component 1: Isobaric Counter-Pressure Filler - Manufacturer: Schilpp (Germany) - Model: Contibloc 20/5 - Year of Manufacture: 1974 - Year of Complete Overhaul: 2019 (by Petr Markl) - Number of Filling Valves: 20 (Long tube design to drastically minimize foaming) - Number of Capping Heads: 5 (Crown cork) - Cap Size: 26 mm crown cap - Capacity: Up to 4,000 bph (depending on product temperature and CO2 volumes) - Processed Formats: 0.33 L long-neck glass bottles (custom nylon exchange stars included) - Operating Pressure: 8 bar - Outfeed: Integrated small discharge table directly synchronized with the labeller.   Component 2: Linear Labelling Machine - Manufacturer: Enos Euro (Italy) - Model: C5000 - Year of Manufacture: 2019 - Capacity: Up to 5,000 containers/hour (depending on label dimensions) - Application: Self-adhesive labels (Body / Back) - Processed Formats: Bottles, cans, and cylindrical containers - Adjustments: Tool-free manual side-barrier system for ultra-fast format changeovers.   Csdpfjyr Nr Sox Ailerd Reconditioning Details & Recent Upgrades (Markl 2019) During the 2019 general overhaul by Petr Markl, the filler was stripped down and updated with the following technical enhancements: - Product Handling: Custom nylon stars and guide blocks designed specifically for smooth 0.33 L long-neck bottle transport. - Filling Valves: Complete mechanical refurbishment and formatting of the 20 valves for precise 33cl dosing. - Automation Upgrades: High-speed electronic sensor/counter for accurate crown cap distribution control and dedicated rinse pump switch integration. - Safety Features: New clear front safety doors fitted with an active electromechanical "Open Door" emergency stop interlock system. - Mechanical Drive: Complete replacement of main drive transport chains and motor for seamless line speed synchronization.   Scope of Delivery - Isobaric Filling Machine: Schilpp | Contibloc 20/5 | 1974 (Overhauled 2019). - Labelling Machine: Enos Euro | C5000 | 2019. - Accessories Included: Integrated conveyors, localized product sensors, safety guards, and direct coupling outfeed table.

Condition: reconditioned (used), Year of construction: 2010, • Traveling distances X=3100 mm, Y=1950 mm, Z=1390 mm • Heidenhain iTNC 530 with handwheel HR 410 • Machine table for multi side working 3000 mm x 1600 mm • 2-axis NC-universal milling head, for simultaneous and positioning working • Spindel 10.000 U/min HSK 100, 130 Nm Spindle torque • Tool change system HSK 100 / 40 places for 750 mm long tools • Chip conveyor (screw type) in X-axis, for transport into Crodezhlgcopfx Ailsd • Chip conveyor scraper belt type (traverse conveyor), Fabr. Knoll • Coolant container 900 l, Fabr. Knoll • Outside air at spindle • IKZ 60 bar for deep hole drilling function • Covering with safety glass pane, open at the top for loading by crane • 2 part sliding doors at the operator side • 2 part sliding doors at the front side, for easy loading • Radio-controlled measuring probe RMP 60 • incl. washing gun • incl. podiums at the front side and operator side • complete factory overhauled and painted new • short time delivery after arrangement • used machine • Y-axis ball screw in September 2021 incl. bearings renewed • X-axis new linear guiding system, July 2023 changed, renewed • Spindle overhauled at Mai 2023 (clamping system new, clamping cartridge new, rotation unit new, general tests) (at 23105 spindle hours)) • can be visited under power at 72793 Pfullingen • optional fixators • optional installation at customers plant • optional transport • 23122 spindle hours in total • 53991 machine hours in total • Year of construction 2010 Subject to prior sale

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Control system: Siemens 840D-SL Tool positions: 160 Tool holder: HSK 63 Spindle speed: 10,000 rpm / 242 Nm Pallet size: 630 x 500 mm Csdpfxszhlbgj Ailjrd Number of pallets: 2 X-axis: 800 mm Y-axis: 800 mm Z-axis: 1000 mm Table load capacity: max. 1000 kg

Condition: used, Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer Cjdpfxehtry Uj Ailerd -Industrial trailer: with single-axle turntable steering -Payload: 5000 kg -Platform: 2500 x 1250 mm, height 420 mm -Tires: Solid rubber (condition as seen in photos) -Trailer coupling for: industrial trailers -Overall dimensions: 3780/1250/H420 mm -Empty weight: 395 kg

Condition: used, Year of construction: 2016, operating hours: 7,889 h, 2016 | Volvo EW60E with 5 buckets | Used Wheeled Excavator | 7889 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 31900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert Csdpfx Aiezhk Ufslord 58 inspection points 54 approved ✅ 4 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good overall condition and operation. Offset boom, 5 buckets. The injectors have been redone by Volvo a few hundred hours ago. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "36715 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: M275930, cutting length (max.): 6,000 mm, total length: 9,000 mm, total width: 2,000 mm, total height: 2,000 mm, input voltage: 400 V, rotational speed (max.): 2,820 rpm, overall weight: 3,500 kg, power: 7.7 kW (10.47 HP), input frequency: 50 Hz, input current: 19 A, EMMEGI COMBI 5 AXIS STAR TU/6 Double Mitre Saw Cjdjx Uyr Nopfx Ailord Attention: The item can be collected from 16.02.2026 onwards, with the specific pickup date to be agreed upon. FCA D-73529 Schwäbisch Gmünd – loaded onto truck

Condition: good (used), functionality: fully functional, machine/vehicle number: 5FBE1313432, Year of construction: 2000, load capacity: 1,200 kg, lifting height: 4,000 mm, fork length: 1,200 mm, overall weight: 4,000 kg, total height: 2,500 mm, total length: 3,200 mm, total width: 900 mm, TOYOTA 5 FPE 13 electric forklift truck Note: The item must be collected on a binding basis between 18 and 26 February 2026 on a date to be agreed upon. FCA D-78087 Mönchweiler – loaded onto truck. Crodpfex T Agaox Ailod

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Crjdevvkipopfx Ailsd

Condition: used, Year of construction: 1973, Storage location: Nattheim Cedpfx Aievvkt Uslerd

Year of construction: 1999, condition: used, Crane attached to the warehouse, 5 m reach, 500 kg load capacity, without Schmalz lifting device! Crjdpfjv Dau Dox Ailod Storage location: Nattheim

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Crjdpjvvi N Iofx Ailed

Condition: used, Year of construction: 2022, PANEL SAW WITH TILTING SAW BLADE Linvincibile SI 5 KEY FEATURES SLIDING TABLE: GUARANTEED SUPERIOR CUTTING QUALITY OVER THE LONG TERM TELESCOPIC ARM: AN “UNBEATABLE” SMOOTH MOVEMENT SAW UNIT: FOR A PERFECT CUT Technical Data SI 5 Main saw blade diameter (mm): 550 Cutting capacity with extendable fence - with table 3200 mm - with table 3800 mm 3200x3200 3800x3200 Saw blade tilt (degrees): 46 Max. cutting height at 90° (mm): 200 Max. cutting height at 45° (mm): 130 Saw blade speed (rpm): 2500-3500-5000 Scoring blade speed (rpm): 8500 - Extractor port diameter: - on frame - on blade guard 120 100 Main motor power [S6 -40%] Hz50 kW: 7 Scoring motor power [S6 -40%] Hz50 kW: 0.9 Cutting width at rip fence (mm): 1600 Standard equipment and accessories - Optimizer/Process control app for tablets: SCM Thundercut. The app can be downloaded from the App Store or Play Store for tablets compatible with iPadOS or Android. It can be activated via the QR code supplied with the machine. The app enables: * Management of machine fleet and material/panel storage * Creation and editing of projects, importing projects from main furniture design software (file format "cpout"), importing cutting lists * Optimization of cutting lists by selecting one or more proposals from the optimization software integrated into the app * Correct machine settings for each cut, thanks to the simple and intuitive graphics of the 3D sequencer, guiding the operator step by step * Printing barcode labels to identify the various parts, via Bluetooth connection with compatible label printers. - 10-year warranty on the sliding table guide system - Sliding carriage entirely made of aluminum structure with guidance on crimped, hardened and arc-ground steel rails with large contact area - Max. saw blade diameter* up to 450mm with scoring blade mounted* up to 550mm without scoring blade - eye-S 15" electronic control including: * 15" touchscreen monitor * Direct control of the following working axes with manual, semi-automatic, automatic, and incremental modes: - Height adjustment of the main saw blade - Tilt adjustment of the saw unit - Rip fence adjustment - Height and lateral adjustment of the scorer (the scorer is automatically raised to the set position on activation and lowered on deactivation) * Operator assistance functions for complex cuts * Ability to store up to 1000 programs with associated image * Ability to store up to 1000 different tools with associated image * Cutting process management of preloaded parametric machining programs * Environment for creating and storing new sequenced working programs * Automatic import of working dimensions from Thundercut app * USB port * Ready for network connection - Auxiliary function of the electronic control, including: * Determination of correct fence position on rip fence for format processing with tilted saw blade * Determination of correct fence position on rip fence for angle cuts with mitre fence on the work table with or without tilted saw blade - Pivoting control panel above the table - Scoring unit with independent Crjdsxqtvqspfx Ailed

Condition: used, mileage: 398,000 km, power: 335 kW (455.47 HP), first registration: 08/2006, fuel type: diesel, overall weight: 26,000 kg, brakes: retarder, gearing type: semi-automatic, emission class: euro5, loading space length: 4,900 mm, loading space width: 2,350 mm, loading space height: 1,000 mm, Equipment: crane, soot filter, Crane: Cedpfsziwilex Ailsrd ----- Retarder – Air conditioning – Leaf spring suspension – 3-way tipper Trösch – Hiab 166-5, year of manufacture 2009 – Radio remote control Suspension: Leaf spring suspension

Condition: used, first registration: 03/2026, fuel type: gasoline, empty load weight: 8 kg, color: grey-black, gearing type: mechanical, Year of construction: 2026, TITLE: USED ROZZI 5-TINE GRAB FOR SCRAP AND BULK MATERIAL HANDLING WITH MECHANICAL ROTATOR REF.: 26-ATT-06 MODEL: RV130 WEIGHT: 145 kg Codpfxeyru Rme Ailjrd CAPACITY: 130 l Subject to errors and/or omissions Displayed prices do not include VAT. Please contact our sales team for an updated comparison of prices and conditions. For more information: Loris: +39 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the purchase and sale of industrial and commercial vehicles, specializing mainly in the waste sector. Specialists in trucks, trailers, and demountable equipment. A ready-to-deliver fleet with over 50 trucks and over 150 containers, skip bins, with and without demountable cranes. E.&O.E. Given the quantity of listings and details provided, Aurora advises verifying the accuracy of the information with the sales staff.

Condition: used, mileage: 143,437 km, power: 62 kW (84.30 HP), first registration: 09/2011, fuel type: diesel, empty load weight: 1,762 kg, maximum load weight: 1,038 kg, overall weight: 2,800 kg, axle configuration: 4x2, wheelbase: 3,000 mm, fuel: diesel, CO₂ emissions: 190 g/km, fuel consumption (urban): 9.4 l/100km, fuel consumption (extra-urban): 6 l/100km, fuel consumption (combined): 7.2 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 3, total length: 4,892 mm, loading space length: 2,501 mm, loading space width: 1,600 mm, loading space height: 1,300 mm, Year of construction: 2011, construction height: 1,970 mm, Equipment: ABS, central locking, immobilizer system, onboard computer, soot filter, traction control, The Volkswagen T5 Transporter 2.0 TDI is a reliable commercial vehicle, ideally suited for a wide range of transport requirements. Featuring a robust diesel engine that complies with Euro 5 emissions standards, it delivers a strong output of 84 HP. Practical features such as dual sliding doors on both sides ensure especially easy loading and unloading. The vehicle has a mileage of 143,437 km and was first registered in September 2011. It comes in an appealing "Ginster Yellow" finish and is equipped with a manual 5-speed transmission. The cab seats three, and with its truck registration and diverse loading capabilities, the T5 proves to be both functional and versatile. With an average fuel consumption of 7.2 l/100 km and CO2 emissions of 190 g/km, this transporter combines efficiency with performance. A detailed inspection is possible during the stated business hours without prior appointment. Cjdpfx Aiezivw Ijlerd Sale exclusively to commercial customers (agriculture, freelancers, small and large businesses) or for export. Subject to prior sale and errors excepted.

Condition: used, mileage: 94,704 km, power: 62 kW (84.30 HP), first registration: 06/2012, fuel type: diesel, empty load weight: 1,762 kg, maximum load weight: 1,038 kg, overall weight: 2,800 kg, axle configuration: 4x2, wheelbase: 3,000 mm, fuel: diesel, CO₂ emissions: 190 g/km, fuel consumption (urban): 9.4 l/100km, fuel consumption (extra-urban): 6 l/100km, fuel consumption (combined): 7.2 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 3, total length: 4,892 mm, loading space length: 2,500 mm, loading space width: 1,600 mm, loading space height: 1,300 mm, Year of construction: 2012, construction height: 1,970 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, traction control, The Volkswagen T5 Transporter 2.0 TDI is a reliable used vehicle, first registered on June 29, 2012. It is powered by a 2.0-liter diesel engine with an output of 62 kW (84 hp) and complies with the Euro 5 emissions standard. The transporter has a mileage of 94,704 km and is well-equipped, featuring an N1 (commercial vehicle) registration and practical twin sliding doors on both sides. Credjzivwzepfx Ailjd With a length of 4,892 mm, a width of 1,904 mm, and a height of 1,970 mm, the T5 Transporter offers a spacious cargo area, further enhanced by a resilient wooden floor panel. The vehicle is finished in Ginstergelb (primrose yellow), equipped with a 5-speed manual transmission, and features front-wheel drive. The combined fuel consumption is 7.2 l/100 km, with CO2 emissions of 190 g/km. This used vehicle is in good condition and is roadworthy until the main inspection expires in May 2024. It provides seating for three people and is ideally suited for commercial use. Viewing is possible on short notice during business hours without prior appointment. Sale only to businesses (agricultural enterprises, freelancers, small or large companies) or for export. Subject to errors and prior sale.