Used Schechtl Smt 310 Nc/Bv for sale (8,858)

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 9558, Used fully functional WJS waterjet cutting machine with KMT SLIV 50 HP pump. Machine is in disassembled condition and can not be inspected. Installation and commissioning will be done by us and is not included in the price. The machine can also be completely overhauled Gedpfxei Hckrs Akyokc ( new control cabinet, new control and new CE. This would mean a surcharge of about 50.000€)

Condition: used, Eccentric stamping press HAULICK + ROOS, Type RVD 125 Double-column eccentric press Machine No. 212560, Year of manufacture 1981 Pressing force 125 tons Table size 880 x 800 mm Table opening 470 x 140 mm Column distance 900 mm Column distance, side 415 mm Ram stroke 45 mm Ram adjustment range 0-80 mm Installed height as shown in the picture 340 mm Stroke rate 50 to 300 strokes/min Motor power, main drive 22 kW Power connection 380 volts, 50 Hz - Double connecting rod drive with 4-bearing eccentric shaft for off-center ram pressure load - Adjacent electrical cabinet Gkjdpfohlnzksx Akyjc - NC roller feed EBU, width 250 mm, year of manufacture 2003 - Adjacent control panel for the roller feed - Strip feed direction from left to right Space requirement (press) L x W x H 3000 x 2000 x 3020 mm Transport height 2950 mm Weight of the press approx. 11 tons

Condition: used, 2-axis pick-and-place unit, loader, servo robot, workpiece gripper, component insertion unit, pick-and-place robot Pick-up device, handling device for presses, lathes, etc. GETECHA, Type GL-20S Serial No. 13836, Year of manufacture 10/2003 Travel range, Z-axis: 1900 mm Travel range, Y-axis: 250 mm Travel speed, Z-axis: max. 1100 mm/sec. Travel speed, Y-axis: max. 227 mm/sec. Continuously variable travel speed in the Y and Z axes via servo motors SMB - Precise axis movement via linear guides - Control system: epis - Control panel located nearby - Interfaces for conveyor belt, gripper magnets, ejector cylinders, vacuum, gripper - External monitoring inputs for emergency stop, press open, press closed, safety doors closed, automatic mode - Mounted gripper with 3 lifting magnets, 3 pneumatic ejector cylinders (30 mm stroke), 1 pneumatic clamping cylinder (40 mm stroke) Godoharwyjpfx Akyskc - Operating hours: 25998 hrs. The unit was used as a loader/pick-up device on a press. Space requirement L x W x H: 2900 x 1800 x 2000 mm Weight: approx. 800 kg Good condition

Condition: used, Controlled cross table, cross sliding table, clamping table, clamping plate with T-slots, clamping angle, cross table NC, linear robot, coordinate table -Controlled cross table: was used as a soldering station -Manufacturer: Walko, cross table NC type PNC 500 Gjdpfx Ashtn Sbjkyokc -Table surface: 600 x 300 mm -Travel approx.: X 500 mm / Y 350 mm -Dimensions: 1050/1030/H1530 mm -Weight: 240 kg

Condition: good (used), Reversible clamping device, 4th axis, rotary table, rotary indexing table, controlled rotary table, dividing head, dividing head, rotary indexing table, rotary coupling -Manufacturer: Fibro, Fibroplan rotary table with drive -Type: NC1.03.0340.1.1.04.04 -Table diameter: 340 mm -Clamping: hydraulic Gsdpfxshvtcbj Akyekc -Drive: Indramat servomotor type 112B-0-LD-4-C/180-A-0/Wi533LX/S011 -Number: 2x round table available (one of which has a base plate) -Price: per piece -Dimensions: 660/640/H550 mm (with base plate) -Weight: 420 kg (with base plate) /pc.

Condition: new, Year of construction: 2026, Bending machine ZB 70/3 H NC Zopf - semiautomatic Gkedpsfkz Rbofx Akyjc - with foot pedal - with standard roller set TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 40 mm - roller diameter: 152/162 mm - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,1 kW - motor for hydraulic: 1,1 kW - hydraulic pressure: 8 to - adjusting way: 120 mm - weight: 490 kg - dimensions: - colour RAL5012 / RAL7015 NC-CONTROL for ZB 70/3 HA: - two axes controlled - touch screen - memorise of 1000 programs ech 19 steps - interpolation - accuracy of the y-axes 1/10 mm - programmable forward and backward

Year of construction: 1983, condition: ready for operation (used), machine/vehicle number: 2810-3076, table mounting size: movement x: 560 mm movement y: 450 mm movement z: 450 mm tailstock stroke: 80 mm spindle taper:SK 40 spindle turning speed range: 40 - 4000 rpm carriages continuously adjustable: 2 - 2000 mm/min rapid move: 4 m/min Gkjdpfjfnry Hex Akysc space needed: 2000 x 2150 x 2030 mm weight: 2720 kg

Condition: excellent (used), "SOFTFORMING" SINGLE-SIDE EDGE BANDER - Min/Max edges (band) thickness in rolls mm 0,3 - 3 - Min/Max edges thickness in strips/lippings mm 0,4 - 12 - Min/Max panels thickness mm 12 - 60 - Numerical Control: Power Control PC 22 - Feeding speed (adjustable) m/min 12 - 24 - Top motorized pressure belt - Free Space: mm ? - Glueing Unit (Hot Melt + Quick Melt System): QE 34 / E12 - Pressing Roller (Revolver) both for straight edges and shaped edges (Softforming) - Edge coils supporting unit, with N. 1 coil - Snipping Unit HL 84 (2 x Kw 0.84 at RpM 12000) - Rough Trimming unit (2 x Kw 1.5 at RpM 12000) - Fine Trimming Unit (2 x Kw 0.4 at RpM 12000) 0°-30° OPTIONAL: Infeeding system, with extended infeed fence and 3 top motorized rubber wheels Gkedpfxofd Ilys Akyoc

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Numerical Control IMATRONIC 231 (IMAWOP) Max useful working area (without edge banding process) mm 5000 x 1630 x 100 Max useful working area (edge banding process) mm 3900 x 1450 x 60 (panel thickness) No. 8 movable rails (supports) length mm 1200 LED displaying both the axe X and axe Y position Vacuum cups (with No. 1 vacuum pump, capacity 140 m3/h) Safety side metal grids and front emergency carpets Motorized belt to evacuate the wastes from the working process No. 2 Vertical Electro-spindles HSK F63 (1 x Kw 11 + 1 x Kw 7,5) Automatic Tools Changing System, with 18 folds (places) No. 21 Independent vertical boring spindles (4 x Kw 1,2) No. 6 Independent horizontal boring spindles (1 x Kw 3) Banding group on board - Glueing Unit (Hot Melt Glue) VT 50 Edge coils supporting unit (No. 6 reels) OPTIONALS: No. 1 Circular Saw to cut and for grooving - max diam mm 200 (90°) No. 1 Aggregate Flush-Trimming/Scraping Unit Gkedpfx Aksfbmqtsyoc No. 1 Cross aggregate with No. 4 horizontal boring spindles

Condition: used, Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Pneumatic cylinder -Stroke: 310 mm Gkedpfx Aod Sti Ejkyoc -Piston: Ø 40 mm -Piston rod: Ø 16 mm -Number: 5x cylinders available -Price: per piece -Dimensions 66/66/515 mm -Weight: 2.8 kg

Condition: reconditioned (used), Year of construction: 2015, Used automatic hydraulic band saw for metal MEP Shark 230 nc hs 5.0 Automatic auger chip remover Blade size: 2950x27x0.9 Choice of cutting speed with inverterr: from 15-100 m/min Capacity: round 230mm, square 230x230mm Year: 2015 Possibility of cuts also in semi-automatic mode The machine has been fully serviced, the following parts have been replaced: all bearings, reducers, both wheels (pulleys) leaf, hard metal plates in guides, main shaft, coolant pump, two jaws, coolant pipes,yojstick, fans and other consumables. Gksdpotva Nhjfx Akysc

Condition: good (used), Year of construction: 2008, Description: Takisawa Manufacturer: Takisawa Type: EX-310 Turning length approx. 500 mm. Rotation diameter: approx. 260 mm. Gkodpfxjtrd Srj Akyec Equipment: Control: Fanuc 21i-TB Bar loader for bar length 1.5 m Tailstock Turret with 12 tool stations and driven tools. Three-jaw chuck Ø 250 mm.

Condition: good (used), Cross table controlled, cross table NC, coordinate table, LM Guide Actuator, linear drive, coordinate table, precision table linear guide, CNC cross table -Cross table: with linear drives THK LM Guide Actuator KR -Travel: x= 310 mm / y= 500 mm / z= 125 mm -Spindle pitch: 10 mm -Individual components: see photos -Dimensions: 750/550/H445 mm Gedpoqgi Ihsfx Akyekc -Weight: 35 kg

Condition: good (used), Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, ventilation fan, exhaust gas extraction -Manufacturer: Ziehl-Abegg, radial fan type DKHR 310-4-4 -Speed: 1330/1050 rpm -Power: 0.12 kW -Protection class: IP 44 -Dimensions: Ø 310 x 165 mm Gkjdsqpl Rujpfx Akyjc -Weight: 5.5kg -Quantity: 1 piece available

Condition: ready for operation (used), Travel X/Y/Z/U/V: 400mm/250mm/400mm/400mm/250mm, max. workpiece dimensions X/Y/Z: 850mm/500mm/400mm, wire diameter: 0.1mm-0.3mm, max. table load: 1000kg, power requirement: 10kVA. Machine dimensions X/Y/Z: approx. 1800mm/1600mm/2230mm, weight: approx. 2800kg. On-site inspection is possible. Godpfxjuqacko Akyokc

Condition: used, mileage: 367,619 km, power: 70 kW (95.17 HP), first registration: 09/2011, fuel type: diesel, overall weight: 3,500 kg, axle configuration: 2 axles, wheelbase: 3,250 mm, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, number of seats: 2, Equipment: ABS, airbag, cruise control, electronic stability program (ESP), Power/engine : 2.148 cm³, with turbocharger Axles : 4x2 Brakes : ASR, disc brakes Refrigerated body : Cold Car, bunker doors/ice, 3 doors left, number of doors right 3 doors Refrigeration unit : Thermo King, Multi-Temp with 2 evaporators, compressor/electricity drive Other equipment : Power steering, immobilizer ID: 117854 Wheelbase 3250mm Refrigerated body Cold Car, bunker doors/ice, 3 doors left, 3 doors right Thermo King compressor/powerDrive SERVICEINTERVAL INDICATOR ASSYST DISC BRAKE ABS FUEL FILTER WITH WATER SEPARATOR FUEL PREHEATING BRAKE SYSTEM WITH ABS AND ASR ELECTRONIC STABILITY PROGRAM (ESP) STABILITY PROGRAM (ESP) REAR SPRING HARDENER STABILIZERS HA UNDER FRAME REINFORCED STABILIZER BAR FRONT AXLE REINFORCED RADIO EQUIPMENT ELECTRICS FOR SUPERSTRUCTUREINTERIOR LIGHTING FUEL PRE-WARMING AIRBAG DRIVER Vehicle is sold in original condition, d.i.e. without reconditioning, as it came from the field. For vehicles in original condition, we therefore recommend an on-site inspection. Multi-temperature for customers who require different controlled temperatures so that different products can be delivered with just one vehicle. This allows you to transport both frozen products at –33°C and dairy products at +3°C simultaneously in separate compartments. Cooling takes place via a unit, usually with several condensers (see multi-temperature). The unit is operated either with an external power supply (220V) or via the motor during the journey. The cooling capacity depends on the volume to be cooled and the outside temperature. We always have a large selection of used refrigeration and ice cooling vehicles in stock. You can find more from our range under Non-binding offer, subject to errors and prior sale. Godpfx Asufaw Nekyokc

Condition: used, mileage: 249,405 km, power: 70 kW (95.17 HP), first registration: 10/2014, fuel type: diesel, overall weight: 3,200 kg, axle configuration: 2 axles, wheelbase: 3,250 mm, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, number of seats: 2, Equipment: airbag, central locking, cruise control, electronic stability program (ESP), Power/Engine: 2,143 cm³, with turbocharger Axles: 4x2 Brakes: ASR, disc brakes Driver's cab: tinted glass, electric. Window lift, JVC audio system Radio CD player CD changer Cooling body: Cold Car, bunker doors/ice, 3 doors on the left, number of doors on the right: 3 doors Cooling unit: Eutectic storage cooling, cooling down to -33 °C Other equipment: Power steering, Immobilizer ID: 117942 Electronic Stability Program (ESP®) Front axle stabilizer Battery management Radio Heated and electrically adjustable exterior mirrors Storage above the windshield 6-speed manual transmission ECO Gear Wheelbase 3250 mm 3.5 ton truck Speedometer km/h Adaptive brake light Engine OM 651 DE 22 LA 70 kW (95 HP) 3800/min CRUISE CONTROL Emissions class Euro 5b+ N1 Driver airbag Smoker's package Black "Tunja" fabric Plate cooling is a cooling system that uses eutectic plates to maintain a suitable temperature level. The passive plates are connected to the mains supply (380V) overnight. The freezing point of the eutectic solution is -33 °C. The eutectic plates serve to maintain the temperature of the already frozen product. We always have a large selection of used refrigerated and ice-cold vehicles in stock. You can find more of our range at Non-binding offer, sale to businesses only, errors and prior sale excepted. Advertisements and company logos on vehicles may have been digitally altered in photos. Gkjdpfx Ajwfuyvekyoc

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 497524, overall weight: 3,565 kg, fuel type: diesel, tank capacity: 449 l, color: red, power: 248 kW (337.19 HP), output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 248 kW (337.19 HP), nominal power (apparent): 340 kVA, continuous power: 248 kW (337.19 HP), continuous power (apparent): 340 kVA, total length: 3,800 mm, total width: 1,400 mm, total height: 2,270 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: FPT/Iveco, type of cooling: water, fuel consumption (combined): 72.4 l/100km, fuel consumption (urban): 37.3 l/100km, fuel consumption (extra-urban): 47.5 l/100km, fuel: diesel, fuel tank capacity: 449 l, battery capacity: 100 Ah, battery voltage: 12 V, input voltage: 12 V, input frequency: 50 Hz, input current: 32 A, operating temperature: 25 °C, ambient temperature (min.): -25 °C, ambient temperature (max.): 45 °C, control cabinet height: 2,270 mm, control cabinet length: 3,800 mm, control cabinet width: 1,400 mm, protection type (IP code): IP65, rotational speed (min.): 1,500 rpm, temperature: 25 °C, type of input current: three-phase, warranty duration: 12 months, Equipment: documentation/manual, mobile diesel tank, De Bredenoord 310 KVA generator is een betrouwbare en veelzijdige oplossing voor tijdelijke en langdurige stroombehoeften in diverse omgevingen. Het aggregaat is ideaal voor mobiel gebruik en voldoet aan de emissie-eisen van Stage-V. De efficiënte PFT/Iveco motor, gecombineerd met een Stamford generator, levert uitstekende prestaties en lage operationele kosten. De generator is uitgevoerd in een geluidsisolerende omkasting die zorgt voor een minimale geluidsuitstoot, ideaal voor gebruik in geluidsgevoelige omgevingen (super silent). De kast is voorzien van dikke, oliebestendige geluidsisolatie en externe stekkerdozen met zekeringautomaten voor extra veiligheid. Met een brandstoftank van 600 liter heeft de generator een autonomie van maximaal 7 uur bij continu gebruik. Het systeem werkt op diesel, HVO of GTL brandstof, wat zorgt voor flexibele brandstofopties. Technische Specificaties: - Model: Bredenoord 310 KVA - Nom. vermogen: 340 KVA - Max. vermogen: 340 KVA - Motor: FPT/Iveco C87TE4 - Generator: Stamford borstelloze alternator (AVR) - Vermogen: 220 340 kVA - Voltage: 230/400 V, 50 Hz - Toerental: 1500 tpm Gjdpfx Akewf Nnhoyjkc - Geluidsniveau: 68 dB(A) op 7 meter - Brandstoftank: 449 liter - Autonomie: - 100% PRP: 7 uur - 70% PRP: 9 uur - Motorvermogen:248 KW - Batterijlader en motorverwarming: Standaard aanwezig - Control panel: Comap MRS16 (auto start/stop) - Afmetingen (L x B x H): 3.80 m x 1.40 m x 2.27 m - Gewicht: 3565 kg - Emissieklasse: Brandstofverbruik: - 100% PRP: 66,6 L/h - 70% PRP: 47,5 L/h - 50% PRP: 37,3 L/h Opties: - Motorverwarming - Batterijlader - 3-weg brandstofkraan - XXL brandstoftank Geluidsdemping: De generator is ontworpen met geoptimaliseerde luchtinlaten en speciale isolatiematerialen die geluid minimaliseren. De geluidsisolatie is versterkt met wol van verschillende diktes om geluid over een breed frequentiespectrum te reduceren. Dit maakt het ideaal voor gebruik in geluidsgevoelige gebieden. Duurzaamheid: De omkasting is bestand tegen corrosie dankzij een verflaag die getest is voor meer dan 2000 uur (C5I-H). Dit zorgt voor een lange levensduur, zelfs in de meest uitdagende omstandigheden. Veiligheid: De generator is uitgerust met versterkte sloten en roestvrijstalen scharnieren. De deuren zijn ontworpen met een afgeschuinde hoek van 20 graden om waterophoping te voorkomen en oxidatie te minimaliseren. Transport en Verplaatsing: De generator is gemakkelijk te verplaatsen dankzij versterkte hijsogen en stalen balken, die zorgen voor eenvoudig transport op bouwlocaties. Het ontwerp zorgt voor een stabiele en veilige verplaatsing van de generator zonder risico op schade. Klantspecifieke Aanpassingen: De Bredenoord 310 KVA generator is beschikbaar in verschillende uitvoeringen, van 20 KVA tot 600 KVA. Klantspecifieke aanpassingen zijn mogelijk, waardoor de generator kan worden aangepast aan specifieke eisen en toepassingen. Certificeringen: - CE-gecertificeerd - Europese makelij Toepassingsgebieden: De generator is geschikt voor diverse sectoren, waaronder de bouw, industrie en andere toepassingen waar betrouwbare en efficiënte stroomvoorziening vereist is.

Condition: good (used), Year of construction: 2007, turning diameter 1600 mm control Sinumerik 840D workpiece dia. 1400 mm boring diameter 100-500 mm Gsdpfx Akewzmqrjyjkc weight of the machine ca. 35 t dimensions of the machine ca. 5,60x3,20x4,00 m

Condition: new, sheet length: 4120sheet thickness: 13,0total power requirements: 30weight approx.: 16750messurements (LxWxH): 4930x3160x2100 Gksdpfxed Eqrde Akyec

Condition: new, sheet length: 3.120sheet thickness: 16,0total power requirements: 30weight approx.: 15.000messurements (LxWxH): 3.875 x 3.200 x 2.170 Gkjdsd Eqriepfx Akysc

Condition: new, sheet length: 3120sheet thickness: 10,0total power requirements: 22weight approx.: 12250messurements (LxWxH): 3850x3060x1850 Gsdpfxed Eqrle Akyekc

Condition: used, Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 310 mm -Passage: Ø 110 mm Gedpfxjd Irays Akyekc -Bayonet: short cone flange cone size 6, cone Ø 106 mm, bolt circle Ø 133.4 mm -Weight: 47.2kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 6400x1500x1780 mm Total power requirement 19 kW Weight 1800 kg Gkodpswt Ua Ejfx Akyec

Condition: good (used), Year of construction: 1982, functionality: fully functional, Tool milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control: Deckel Dialog Control 4: 3D contouring control, including drilling and milling cycles Monitor, electronic handheld control panel Terminal for program input and output Gkodpfx Akswid Spoysc Technical specifications: Travel range X/Y/Z 300 x 220 x 400 mm Speed 31.5 - 3,150 rpm with 21 gear stages Feed rate 4-2,000 mm/min Rapid traverse 4 m/min Drive power 1.6-2.0 kW SK 40 tool holder Hydraulic tool clamping Universal milling table with digital display: Clamping area 600 mm x 320 mm Table load 180 kg C-axis rotation range 360° A-axis tilt range 15°/45° B-axis swivel range +/- 45° Vertical milling head: Manual quill stroke - horizontally 65 mm, vertically 60 mm Additional equipment: Manual machine handwheels with scale Direct travel measurement of the NC axes Cooling water system Special accessories: Approx. 33 tool holders (without tools) - see photo High-speed milling spindle Machine data: Machine weight approx. 1,380 kg Space requirement including accessories L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm Power supply: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected with power and chippings by appointment.