Used Schechtl Smt 310 Nc/Bv for sale (8,829)

Condition: good (used), Year of construction: 2019, functionality: fully functional, For sale is a high-quality, all-in-one winter combination machine, type 5K 310-2600, manufactured in 2019. This machine combines several processing units in a compact design and is ideal for carpentry workshops, joineries, and demanding woodworking applications. The technical data has been taken from the nameplate. Technical data Manufacturer: Winter Holztechnik GmbH Type: 5K 310-2600 Year of manufacture: 2019 Machine no.: 201904001 Weight: approx. 575 kg Voltage: 400 V / 3 phases / 50 Hz Jointer and Thicknesser Motor power: 2.8 kW Planing width: 310 mm Knife shaft Ø: 70 mm 3 knives Knife shaft speed: 4,800 rpm Removal rate (jointing): max. 4 mm Removal rate (thicknessing): 2 mm Feed speed: 6 m/min Jointing table: 1,380 × 310 mm Thicknessing table: 540 × 306 mm Max. feed height: 235 mm Sliding Table Circular Saw Motor power: 3.8 kW Saw blade Ø: 315 mm Main saw blade speed: 4,500 rpm Cutting width with parallel fence: up to 860 mm Sliding table: approx. 1,260 mm Blade tilt: 90°–45° Spindle Moulder Nodpfezfilwjx Alnscu Motor power: 2.8 kW Spindle diameter: 30 mm Working height: 100 mm Speeds: 1,800 / 3,000 / 6,000 / 9,000 rpm Mortising Machine Drill chuck: 16 mm Drill stroke: 140 mm Table size: 500 × 210 mm Max. workpiece length: 1,250 mm Equipment Spindle Moulder Jointer and Thicknesser Mortising Machine Sliding table Angle and parallel fence Compact multi-function machine for space-saving work Transportation possible for an extra charge! Note The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: good (used), Year of construction: 2008, feed length X-axis: 400 mm, feed length Y-axis: 250 mm, feed length Z-axis: 400 mm, Heidenhain TNC 124 control quill electronical hand wheel coolant device Technische Daten: Njdjrb A Tcepfx Alnocu Längsweg (X-Achse) / X-travel longitudinal 400 mm Querweg (Y-Achse) / Y-travel cross 250 mm Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Tischaufspannfläche / table clamping area 600 x 320 mm Werkzeugaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed range 30-6300 UpM Vorschub x,y,z / feed x,y,z 10,10,8 m/min. Antriebsleistung gesamt / drice capacity 6,5 kW Gewicht ca. / weight ca. 1200 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: ready for operation (used), Year of construction: 2020, machine/vehicle number: 5001522601F, functionality: fully functional, operating hours: 500 h, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 540 mm, cutting width (max.): 700 mm, control type: PLC-controlled, roller diameter: 80 mm, pivoting range: 60 °, actuation type: electric, rotational speed (max.): 15 rpm, rotational speed (min.): 150 rpm, total height: 2,510 mm, total length: 4,700 mm, total width: 4,700 mm, overall weight: 3,875 kg, table height: 810 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, lighting, motor brake, rotational speed infinitely variable, PEGAS-GONDA PEGAS 500x750 HERKULES X-CNC Automatic Double-Column CNC Band Saw for Metal Cutting with Automatic Mitering Only 500 Operating Hours – Manufacturer-Maintained Machine – 6-Month Warranty We offer for sale a professional PEGAS-GONDA PEGAS 500x750 HERKULES X-CNC automatic double-column metal band saw with automatic angle positioning from +45° to -60°. Year of manufacture: 2020 The machine was operated directly by the manufacturer from 2020 until May 2026 and has accumulated only approximately 500 operating hours. As a result, it comes with a fully documented history, has received regular professional maintenance, and remains in excellent condition with minimal wear, ready for immediate production use. Njdpfxezg H Avj Alnecu Main Features ✓ Fully automatic CNC operation ✓ Automatic mitering from +45° to -60° ✓ Material feeder with 2,000 mm stroke ✓ Precision ball screw drives for both the material feeder and saw frame movement ✓ Siemens control system ✓ Saw blade size: 41 × 1.3 mm ✓ Heavy-duty double-column design for maximum cutting accuracy ✓ Suitable for both high-volume production and custom fabrication work Why Choose This Machine? Only 500 Operating Hours Exceptionally low operating time for a machine manufactured in 2020. The saw was used by the manufacturer and not in continuous production, resulting in very low wear. Direct Sale from the Manufacturer Purchase a machine with a clear origin, known history, and documented maintenance records. 6-Month Warranty Additional peace of mind when purchasing used industrial equipment. Immediate Availability No waiting time for the production and delivery of a new machine. Significant Cost Savings A new machine with a comparable configuration costs approximately CZK 1.8 million. Live Demonstration Available The machine can be inspected and tested under power prior to purchase. Machine Condition Fully operational Only approximately 500 operating hours Regularly serviced by the manufacturer Ready for immediate use No immediate investment required The machine is available for inspection and demonstration in Slavkov u Brna, Czech Republic. If required, we can also offer a brand-new machine with a full manufacturer's warranty. Installation and Training A professional service team is available to provide: Machine installation at your facility Commissioning and start-up assistance Operator training After-sales technical support

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, feed length X-axis: 400 mm, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, Metal milling machine DECKEL, type FP4 NC, Heidenhain control, manufactured in 1983, comes with a large number of tools. Ncodjzg Axmopfx Alneu

Condition: used, Year of construction: 2017, capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180x70 mm Ncodpfsy Ruvbsx Alnsu 110 mm 95 mm 135x60 mm 120 mm 100 mm 135x60 mm 180 mm dimensions of saw-blade 350x32x3,4 mm turning speeds 1700/3400 U/min weight of the machine ca. 600 kg

Condition: repair required (used), Hydraulic vise, machine vise, NC compact clamp -Handover in its current condition as inspected Nsdjb A Ik Depfx Alnjcu The vise has no spindle and is therefore sold as a source of spare parts. -4x clamping jaws: 200 x 60 mm -2x clamping jaws: 160 x 50 mm -Dimensions: 530/160/H165 mm -Weight: 104 kg

Condition: used, TECHNICAL DETAILS Ncjdpfjug U Dyex Alnou - Spindle number : 1 - Honing range : Ø 1,5 - 50 [mm] - Honing stroke : 0 - 100 [mm] - Spindle speed : 150 - 2500 [Rpm] - Dimensions : 1550 x 800 x 1450 [mm]

Condition: excellent (used), Year of construction: 2011, operating hours: 26,882 h, functionality: fully functional, travel distance X-axis: 310 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 270 mm, Exeron S 310 MF Year of manufacture: 2011 Generator hours: 26882 Control system: Exowin 20 X, Y, Z travel: 310 x 270 x 270 mm C-axis 3R tool holder in the spindle Erowa chuck on the machine table with magnetic plate Generator: 64 A C-box for carbide and PKD tools 20-position tool changer Nedpfszguk Uox Alnocu Fire extinguishing system Chiller Aluminum clamping plate, Erowa Documentation Machine is connected and available for inspection.

Condition: used, Flame heating device, Roland Groß + Söhne GmbH Ring burner for heating, for weld preheating, casting preheating, etc. Type 1 x 1" Ionization Manufacturer No. ALMA, Year of manufacture 03/20 Connection voltage: 230 volts Nedpfx Aljdz Spwsnjcu Pe gas max.: 500 mbar Pe air max.: 10 bar Vgas max.: 30 Nm3/h Vair max.: 300 Nm3/h Includes 10 different flame ring nozzles - Flame monitoring, Hans Henning - Ring nozzle, foldable design consisting of 2 halves, inner diameter 310 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 400 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 490 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 500 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 590 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 690 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 690 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 800 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 890 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 890 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 990 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, arc length 1500 mm, with hose quick-connect coupling and ignition system, diffuser in the center For heating pipes and containers. For heating steel to welding temperature. Ideal for repair welding and manufacturing of welded components made of fine-grain steels. Preheating for powder flame spraying or Sulzer Metco high-velocity flame spraying. Heating with gas for thermal spraying.

Condition: used, mileage: 331,173 km, first registration: 07/2013, tire size: 315/80 R22.5, axle configuration: 4x2, wheelbase: 6,300 mm, color: other, driver cabin: day cab, emission class: euro5, suspension: steel-air, total length: 11,060 mm, total width: 2,550 mm, total height: 3,500 mm, Year of construction: 2013, Tyre size: 315/80 R22.5 Axle brand: Anders Brakes: Disc brakes Front axle: Steered; Tyre tread left: 10 mm; Tyre tread right: 10 mm; Suspension: Leaf suspension Rear axle: Twin tyres; Tyre tread left inner: 9 mm; Tyre tread left outer: 6 mm; Tyre tread right inner: 8 mm; Tyre tread right outer: 6 mm; Suspension: Air suspension Unladen weight: 11,195 kg Payload: 7,805 kg Gross vehicle weight: 19,000 kg Damage: none Ncedpfx Alszgmrwonju

Condition: used, mileage: 545,488 km, power: 228 kW (309.99 HP), first registration: 01/2011, fuel type: diesel, tire size: 315/80 R22.5, wheelbase: 4,650 mm, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, gearing type: automatic, suspension: steel-air, total length: 9,600 mm, total width: 2,600 mm, total height: 3,500 mm, Year of construction: 2011, Equipment: ABS, cruise control, soot filter, = Additional Options and Accessories = - CD player - Particulate filter - Headlights - Visor - Alternating current - Toolbox = Further Information = Njdpjzgl E Nsfx Alnscu Tire size: 315/80 R22.5 Brakes: Disc brakes Front axle: Steerable; Left tire tread: 3 mm; Right tire tread: 3 mm; Suspension: Leaf spring Rear axle 1: Steerable; Left tire tread: 5 mm; Right tire tread: 5 mm; Suspension: Air suspension Rear axle 2: Twin tires; Left inner tire tread: 5 mm; Left outer tire tread: 5 mm; Right inner tire tread: 5 mm; Right outer tire tread: 5 mm; Suspension: Air suspension Unladen weight: 15,830 kg Payload: 10,170 kg Gross vehicle weight: 26,000 kg Damage: None

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,000 kg, maximum load weight: 22,000 kg, overall weight: 29,000 kg, axle configuration: 2 axles, loading space length: 7,500 mm, loading space width: 2,170 mm, total length: 11,700 mm, total width: 2,550 mm, total height: 2,650 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Further Information Chassis Fine-grain steel welded construction, drawbar plate with interchangeable 2 kingpin, with 2 kingpin positions Outer frame slightly angled with load-lock profile for lashing straps 2 pairs of lashing eyes embedded in the outer frame on the gooseneck, 5 tons each 8 pairs of lashing eyes embedded in the outer frame in the well, 5 tons each 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without stroke compensation 2 outrigger wedges with holder Aluminum side underrun protection Steel rear underrun protection Quarter-shell fenders in front of and behind the axle assembly Ncjdei Ri Hvepfx Alnsu 2 storage boxes made of stainless steel, w=600/h=400/d=500 mm, with polished, lockable door 2 pairs of pole pockets embedded in the outer frame on the gooseneck, internal dimension 70 x 40 mm 6 pairs of pole pockets embedded in the outer frame in the well, 70 x 40 mm Internal dimensions!! Internal width between the poles 2420 mm!! 3 lashing/pole strips in the well, transverse embedded in the floor over the entire width up to the outer frame, approx. 100 mm high. With 20 mm round steel strips, top and bottom, distance from top to bottom approx. 60 mm (of the round steel). At the bottom with an angle plate as a cover, half open downwards. For lashing and inserting poles 80 x 80 mm. Pieces of insertable poles W=80/ D=50/ L=1200 mm, hot-dip galvanized Pieces of insertable poles W=80/ D=80/ L=1200 mm, hot-dip galvanized Rear extension, mechanical, with hand crank, extendable by approx. 1500 mm, lockable every 500 mm, with support beam, at the center of gravity at approx. 500 mm, loadable with 2000 kg over the entire width, at 1000 mm with 1000 kg over the entire width and at 1500 mm with 500 kg over the entire width, including underrun protection with lighting, extendable. 2 pairs of insertable poles W=80/ D=80/ L=1200 mm, hot-dip galvanized Storage compartment for insertable poles, open, on the front panel or below the loading area (for 10 insertable poles 80 x 50 x 1200 mm and 4 insertable poles 80 x 80 x 1200 mm) Axles & Suspension SAF drum brake axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Last axle with steering knuckle, with automatic reversing lock via reversing light and additional locking function on the vehicle via a button. Air suspension with raise/lower valve Wheels & Tires 235 / 75 R 17.5 according to manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Caution: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Axle load recognition via EBS-Canbus signal, for display on the display in the driver's cab, truck must be appropriately prepared, no factory installation. Electrical System 24 volts, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole sockets at the front, without connecting cable 2 additional LED work lights at the rear, switched via the reversing light 1 LED rotating beacon with holder, swit

Condition: new, Year of construction: 2026, Bending machine ZB 70/3 H NC Zopf - semiautomatic - with foot pedal - with standard roller set TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - shafts are supported by conical bearings Ncsdpfx Ajfkz Rbelnju - slide bars on the slide-support are exchangeable - shaft diameter: 40 mm - roller diameter: 152/162 mm - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,1 kW - motor for hydraulic: 1,1 kW - hydraulic pressure: 8 to - adjusting way: 120 mm - weight: 490 kg - dimensions: - colour RAL5012 / RAL7015 NC-CONTROL for ZB 70/3 HA: - two axes controlled - touch screen - memorise of 1000 programs ech 19 steps - interpolation - accuracy of the y-axes 1/10 mm - programmable forward and backward

Condition: good (used), Year of construction: 2009, Horizontal: Yes Vertical: Yes Diameter: 220mm indexing: 360.000° Centre height:220mm Control system:Siemens 840D Length: 600mm Width: 400mm Height: 800mm Nodpfowvq Tasx Alnecu Weight: 200kg

Condition: used, Year of construction: 2013, functionality: fully functional, cutting height (max.): 310 mm, cutting width (max.): 520 mm, Equipment: CE marking, documentation/manual, Behringer HBP 310-523 GA NA 300 PC, manufactured in 2013, with extensive equipment: PHOTOS will follow! - Powered infeed conveyor with cross transport - 3000 mm feed gripper with single-stroke, rotating movement Nodpozdq Hmsfx Alnecu - Double miter saw - Powered outfeed conveyor with hydraulically pivoting bridge - Pusher on fixed supports - General technical data in the appendix This CNC-controlled sawing system is ideally suited for steel trading, mechanical engineering, and metal construction. Lengths, miter cuts on both sides, and material removal – all automatic.

Condition: excellent (used), Set of 2x Weinig Powerlock L=310 Z=2 heads 8000 rpm Nedpfxozdq H Ts Alnocu Alu Lightweight Diameter 125 mm 1x bottom + 1x top Weinig 10025811 (20 05 071) Weinig 10025812 (20 05 070) Centrolock reversible knife system Z2 Mounting: PowerLock HSK

Condition: excellent (used), Year of construction: 2004, Control system: Heidenhain Working area Swinging diameter over bed: 320 mm Swinging diameter over carriage: 150 mm Distance between centers: 800 mm Working spindle Spindle mount according to DIN 55027: B6 Spindle bore: 50 mm Spindle taper, metric: 60 Main drive Motor power at speed 1500 min-1: 7 kW Spindle speed range, 1st gear: 0 - 1000 min-1 Spindle speed range, 2nd gear: 20 - 4000 min-1 Max. spindle torque 1st gear: 360 Nm 2nd gear: 90 Nm X-axis Max. travel: 190 mm Rapid traverse: 5000 mm/min Max. feed force: 3000 N Z-axis Max. travel of bed carriage: 750 mm Rapid traverse: 8000 mm/min Max. feed force: 5000 N Quick-change tool holder MULTIFIX B Max. steel diameter: 25 x 25 mm Tailstock Diameter of quill: 65 mm Quill travel: 120 mm Internal taper of quill – Morse: 4 Nedjzdp Txspfx Alnscu Machine dimensions Length: 2180 mm Width: 1341 mm Height: 1775 mm Machine weight: 2150 kg Power requirement: 21 kVA

Condition: used, Year of construction: 1981, total length: 3,750 mm, total width: 2,250 mm, total height: 1,700 mm, Colour: Grey Weight: 5.500 kg - Year: 1981 - Documentation available: No - CE certificate present: No - Serial number: B5896 - Drive system: Conventional - Drive type: Hydraulic - Power [kW]: 11.0 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3100 - Backgauge type: Electric - Backgauge depth [mm]: 1100 - Sheet support system: None - Finger guard: Fixed - Angle adjustment: Manual Ncsdpfx Aeyf Hhwjlnsu - Blade gap adjustment: Manual - Table type: Standard table - Transport dimensions: 3750mm x 2250mm x 1700mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: not inspected (used), Year of construction: 1999, Tenoning spindle 1 St. Nodpfx Ajzdk Hyslnecu Number of milling agregates 4 St. Spindle diameter 50 mm Control Weinig PC-Nexus # 7015 Weinig Unicontrol 6 with NC spindles ----- Machine available for inspection while still in operation until September 2026 Summary of technical data (please inquire about any additional accessories included) Item 1: Cross-cut saw ----- > Electronic cross-cut saw, horizontally continuously adjustable > Number of tools: 1 unit > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for identifying the cut position > NC length stop mounted on the slotting table included; positioning of the cross-cut saw integrated into the control system. > Length 3500 mm Item 2: Tenoning and slotting spindle ----- > Number of tools: variable, infinitely adjustable via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely adjustable 254 mm via NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 3: 1st profiling spindle (climb-cut and conventional-cut capable) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, infinitely adjustable via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely adjustable 254 mm via NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 11 kW Item 5: Horizontal profile milling unit (top) ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool cutting circle: 130 mm > Axial adjustment range: 2 positions > Radial adjustment range: 2 positions Item 6: 3. Profiling spindle (hardware groove spindle) ----- > Position: vertical, right > Tool clamping length: 160 mm > Axial adjustment range: 3 positions > Radial adjustment range: 2 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool cutting circle: 210 mm > Motor power: 3.0 kW Additional features ----- > Network-ready (online capability) > Rebating unit for tear-free rebating > Double-part processing package > Return conveyor system for one-man operation: slat conveyor > Screen-based control system > Angled window processing unit > Electronic angle display for angled windows > Industrial PC, PC control/NEXUS > Excluding machining tools ----- Price of the above-mentioned machine available on request! ----- Optional extra: EUR 6,500.00 Note regarding used tools: We currently have used "Gold" series tools in stock (Stock No. #2790) Window tools (Gold series) for IV78 Wood and IV78 Wood/Aluminum Previously used on a Weinig Unicontrol 10; a jointing cutter is additionally required for use on a Unicontrol 6. Tool set for fixed-stroke or CNC spindle machines (80 mm and 95 mm stroke), (Tool set prepared for IV92 where technically feasible) Wood-aluminum tool set ...

Condition: good (used), Adept control unit, Model 310, with operating panel. Ncsdpfx Alezdimaoneu The control unit is supplied together with the operating panel, cables, and software package.

Condition: excellent (used), Year of construction: 2000, Dreh-Øüber Bett 320 mm Dreh-Øüber Support 185 mm turning length 1000 mm Spindelbohrungs -Ø/ Aufnahme 32 mm mm spindle turning speed range (12) 85 - 2000 U/min feeds - longitudinal 0,006 - 1,77 mm/min feeds - cross 0,003 - 0,888 mm/min thread - mm pitch 0,1 - 28 mm thread - module 0,1 - 1,75 mm thread - inch 2,5 - 75 inch. voltage 400 V / 50 Hz power capacity 2,2 kW weight of the machine ca. 0.8 t dimensions of the machine ca. 1,8 x 0,8 x 1,4 m Quick-change toolholder with 5 cassettes, fixed steady, 3-jaw chuck Ø 200 mm, Njdpfotv Iibsx Alnecu coolant device,

Condition: used, Centerless grinding machine ESTARTA 310 Nodpfxsq Ehqfo Alnocu

Condition: excellent (used), Item description: Ncodpfxjy S Tzro Alnju HOFMANN RW/NC-220/320L, 4th axis ----- Item condition: Good used condition. Removed from a Matec machine. Internal number: 26.368

Year of construction: 2011, condition: ready for operation (used), - USED- 2-AXIS CNC LATHE MAX ROTATING DIAMETER: 330 mm MAX TURNING LENGTH: 450 mm MAX TURNING DIAMETER: 200 mm BAR CAPACITY: 51 mm SPINDLE: 5000 rpm; 11-16,5 kW X-AXIS TRAVEL: 160 mm Nodpfx Ajzda Hwslnocu Z-AXIS TRAVEL: 450 mm DRIVEN TURRET HEAD: 12 POS CONTROL UNIT: SIEMENS 810D WEIGHT: 3400 Kg OVERALL DIMENSIONS: 4325 x 2071 x 1742 mm ACCESSORIES: SWARF CONVEYOR

Condition: used, Lens Height without base: 290 mm Base width: 50 mm Distance: 170 mm Nedpfx Alscrcxtsnscu