Used Sandblasting Cabinet for sale (4,084)

Year of construction: 2026, condition: new, Condensation drying of air and indirectly of foodstuffs (fruit, tea, mushrooms and such) is the most energy-saving way of removing water from different materials. It works on the heat pump principle- by cooling on a steamer temperature below the dew point is reached, due to which the surface of the steamer becomes wet with moisture from the air. The heat extracted from the air goes immediately back to the same air, with the help of electric energy needed for the operation of the compressor, 20-30% more heat is generated. - suitable for drying various fruits (apple, plum, peach, etc.) - adjustable temperature and humidity control - automatic ventilation - with stainless steel shelves Specifications: - Performance: 50-100 kg/cycle - Electric demands: 1,2 kW, 230 V - Drying temperature: 40-60°C - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 1420x800x2000 mm - Weight: 200 kg - Number of trays: 22 pcs - Dimensions of trays: 570x570 mm - Drying surface: ~7,2 m2 - IP65 certified electronics - Continuous ventilation, consistent heat - Insulation: 70 mm polyurethane - Closed condensation circle, condensate drain Suitable for fruits, vegetables, herbs, spices, pastes, mushrooms. Pgodpfxed Atghe Aftsr Very easy to clean. It requires minimal maintenance.

Year of construction: 2026, condition: new, Condensation drying of air and indirectly of foodstuffs (fruit, tea, mushrooms and such) is the most energy saving way of removing water from different materials. It works on the heat pump principle- by cooling on a steamer temperature below dew point is reached, due to which the surface of the steamer becomes wet with moisture from the air. The heat extracted from the air goes immediately back to the same air, with the help of electric energy needed for the operation of the compressor, 20-30% more heat is generated. - suitable for drying various fruits (apple, plum, peach, etc.) - adjustable temperature and humidity control - automatic ventilation - with stainless steel shelves Specifications: - Performance: 25-50 kg/cycle - Electric demands: 0,6 kW, 230 V - Drying temperature: 40-60°C - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 710x800x2000 mm - Weight: 100 kg - Number of trays: 11pcs - Dimensions of trays: 570x570 mm - Drying surface: ~3,6 m2 - IP65 certified electronics - Continuous ventilation, consistent heat Pgodpfod Atipsx Aftsr - Insulation: 70 mm polyurethane - Closed condensation circle, condensate drain Suitable for fruits, vegetables, herbs, spices, pastes, mushrooms. Very easy to clean. Requires minimal maintenance.

Condition: used, Year of construction: 2008, functionality: fully functional, type of input current: AC, inner dimension width: 1,800 mm, inner dimension length: 2,300 mm, inner dimension height: 2,500 mm, Equipment: crane, lighting, Shot blasting and painting line. Pgodpfeygnm Dex Aftor Possible to come and see in testing.

Condition: used, Year of construction: 2003, Overview This TIRELLI KS12/660 is a rotary rinsing machine for glass bottles, manufactured in 2003 by TIRELLI (Porto Mantovano, Italy). It previously operated within a complete 2,500 bph glass bottling line for kombucha production and handles formats from 250 ml to 750 ml with a 26 mm neck finish. The machine can rinse with air, water, inert gas or another rinsing medium. The machine is enclosed in stainless steel framing with transparent safety guard doors and features a rotary gripper carousel, infeed and outfeed conveyor sections and a control cabinet with push-button panel. Technical data - Manufacturer: TIRELLI (Porto Mantovano, Italy) - Model: KS12/660 - Year of manufacture: 2003 - Machine type: rotary bottle rinser, glass - Rinsing media: air, water, inert gas or other rinsing product - Formats: 250 ml / 330 ml / 750 ml - Neck finish: 26 mm - Capacity: up to 2,500 bph Condition Used - in production until June 2026; already dismantled and stored. Podpfx Afszrnrpotsgr Availability Immediately available. Location: France. Handling, packing and truck loading can be quoted on request (EXW).

Condition: used, mileage: 65,074 km, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,750 mm, first registration: 06/2023, fuel tank capacity: 80 l, CO₂ emissions: 245 g/km, emission class: euro6, color: grey, number of seats: 5, Year of construction: 2023, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking sensors, seat heater, sliding door, = Additional Options and Accessories = - Front and rear parking sensors - Sliding door on the right side - 360-degree camera - Android Auto - Apple CarPlay - Automatic headlights Pgedpfxszrpccs Aftsr - Heated exterior mirrors - Passenger airbag - Bluetooth - Electric front windows - Electrically folding exterior mirrors - Electrically adjustable exterior mirrors - Electrically adjustable driver's seat - Euro 6 - Driver airbag - Remote central locking - Cruise control - Wooden cargo area - Height-adjustable driver's seat - Height-adjustable steering wheel - Collision mitigation by braking - Collision warning system - Front airbags - Leather steering wheel - Lumbar support - Metallic paint - Multifunctional steering wheel - Multimedia compatible - Fog lights - Radio - Radio with DAB - Rain sensor - Rearview camera - Side airbags in the front - Seat heating - Lane keeping assist - Start/stop system - Immobilizer - Blind spot monitoring - Connected services - Windshield heating - Partition = Additional Information = General Information Number of doors: 5 Model range: May 2019 - July 2023 Cabin: double Technical Information Torque: 390 Nm Number of cylinders: 4 Engine displacement: 1,995 cc Transmission: 6 gears, automatic Top speed: 157 km/h Dimensions Length/Height: L3H2 Dimensions (L x W x H): 598 x 206 x 254 cm Weights Unladen weight: 2,280 kg Payload: 1,220 kg GVWR: 3,500 kg Max. towing capacity: 1,250 kg (unbraked 750 kg) Interior Interior: black Consumption Average fuel consumption: 9 l/100km Maintenance, History and Condition Booklets: Available APK (Technical Inspection): valid until 06/2027 Number of keys: 2 (1 remote) Product Safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: good (used), Year of construction: 2010, functionality: fully functional, Technical details turning diameter 475 mm turning length 830 mm control HEIDENHAIN MANUALplus 620 swing diameter over slide rest 260 mm centre distance 1000 mm spindle bore 70 mm spindle turning speed range 1 - 3000 rpm feeds - cross 0,001 - 1000 mm/r feeds - longitudinal 0,001 - 2000 mm/r rapid travel - longitudinal/face 10 / 5 m/min tailstock quill diameter 70 mm tailstock quill stroke 120 mm tailstock quill taper MT 5 main drive (40 % ED) 25 kW Pgedpfxezr Hdqj Aftor weight of the machine ca. 2,9 t * Control HEIDENHAIN MANUALplus 620 * DXF conversion software (processing of contours in DXF format from CAD drawings) * Ethernet and USB interfaces inside the control cabinet * Coolant system (frequency-controlled), 1–4 bar * Glass scale for direct position measurement on the X and Z axes * 4-position PARAT quick-change tool holder, size 2, with several inserts * 3-jaw-chuck RÖHM ZS 200 * Roller guide for easier movement of the tailstock * 2 movable safety doors * Main motor fan control, temperature-controlled, for particularly quiet environments such as laboratory workshops and schools

Year of construction: 2017, condition: used, This listing is for a Analytikjena UVP Viewing Cabinet, The unit is in full working condition and is ready for immediate release. UVP Mini Chromato-Vue Viewing Cabinets provide a compact darkroom environment for viewing materials. All cabinets feature a contrast control filter that absorbs UV energy to protect the eyes. Each cabinet is designed to be used with specific UVP lamp models, which fit snugly on top of the cabinet. Applications include: Mineralogy Lab Fluorescence Fabrication:Metal Base, Plastic Top Viewport:Soft rubber with UV blocking contrast control filter Curtain:Lightweight materials block ambient light Dimensions Cabinet Interior:9L X 10W X 7H in. (229 X 254 X 178 mm) Dimensions Cabinet Exterior:9L X 10.5W X 12H in. (229 X 267 X 305 mm) Weight 3.6 lb. (1.6 kg) Pedpoxx Ax Djfx Aftjgr

Condition: used, Compact pub brewery with a 2-vessel brewhouse, tanks, bottling equipment, and utility systems. The system consists of the following components: 1. Malt mill (Summer 2017) Roller mill on a painted steel frame with a capacity of approx. 400 kg/h of malt (2.2 kW motor power), featuring a mechanism for fine, rapid adjustment of the roller gap and a bagging spout at the bottom. 2. Brewhouse (Wengert, 2018) Two-vessel brewhouse with a mash/wort kettle and a lauter tun made of stainless steel with copper-clad lids. The kettle (nominal capacity: 500 l) is equipped with a top-driven two-blade propeller agitator and is fired by a gas burner (Weishaupt). The lauter tun is equipped with a rake, a drop floor, and a side spent grain flap with a chute. The brewhouse features a control system (Movonik, 2017) for automating temperature control and agitator speed. The brewhouse is mounted on a stainless steel frame that includes a wort pump, control cabinet, control unit with touchscreen display, and various pipes, valves, and fittings. Wort cooling and aeration are provided by a freestanding two-stage plate heat exchanger and a wall-mounted wort aeration unit. 3. Fermentation/Storage/Pressure Tanks/Transport Tanks - Open fermentation vat (Speidel) with a capacity of 675 liters. The vat is equipped with a temperature sensor and temperature control unit, jacket cooling, a lid, and outlet lines at the bottom and in the lower section of the frame. - 5 cylindroconical fermentation and storage tanks (Mueller, 2017), each with a capacity of 1,250 liters, 2 cooling zones, and up to 3 bar of overpressure. Each tank is equipped with a temperature sensor, its own temperature control unit, a pressure gauge, a bung, a sampling tap, a cleaning line, and a discharge line with a manual valve. - One cylindroconical fermentation and storage tank (Mueller, 2017) with a capacity of 625 liters, 2 cooling zones, and an operating overpressure of up to 3 bar. The tank is equipped with a temperature sensor and temperature control, a pressure gauge, a bung, a sampling tap, and cleaning and discharge lines with manual valves. - 4 horizontal dispensing tanks (Mueller, 2017), each with a capacity of 520 liters, a cooling jacket, and up to 3.9 bar overpressure. The tanks are mounted on a shared stainless-steel truss structure. Each tank is equipped with: a temperature sensor and its own temperature control unit, sight glasses, a sampling valve, a hose-type level indicator, a pressure gauge, and a discharge line with a manual valve. A four-line CO₂ pressure-reducing station is also located on the side of the tank group. - Horizontal transport tank (Mueller, 2019) mounted on a frame with fork rails and jacket cooling. The tank has a capacity of 1,020 liters and can withstand up to 3.9 bar of overpressure. Equipped with a pressure gauge, safety valve, sight glasses, and a discharge line with a manual valve. Suitable for use with tank liners. 4. Filling - Batch bottle washing machine on a mobile stainless steel frame for processing up to 10 bottles per cleaning cycle. Additional equipment includes a centrifugal pump, a detergent tank, a fold-down stainless steel hood, and various pipes and fittings. - Filler for party cans and siphons (Leicht, 2018) with two filling stations. Semi-automatic, mounted on a stainless steel frame with various fittings and controls. 5. Utilities - Stainless steel hot water tank with electric reheating via screw-in heating elements with a power rating of 7... Pgedpfx Afoztpxmstjr

Condition: new, Year of construction: 2026, functionality: fully functional, LUFT 1000 COMPACT Screw Compressor with Refrigerated Air Dryer and 500 L Compressed Air Tank The LUFT 1000 COMPACT screw compressor with an integrated refrigerated air dryer and a 500 L compressed air tank is a modern solution designed for reliable and efficient compressed air supply. The CORMAK LUFT series screw compressors combine state-of-the-art pneumatic technology with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. THE SET INCLUDES: LUFT 1000 COMPACT screw compressor with refrigerated air dryer 500 L horizontal compressed air receiver Are you looking for a professional solution for powering pneumatic tools in a workshop, paint shop or small production line? The CORMAK LUFT 1000 COMPACT screw compressor with refrigerated air dryer is an excellent choice. With a 7.5 kW motor and an impressive actual output of up to 990 l/min, it provides a continuous supply of compressed air required for efficient operation of impact wrenches, blow guns and painting tools. It can also be used as a compressor for small sandblasting machines. This model has been designed for continuous-duty operation, making it ideal for demanding applications such as tyre service centres, automotive workshops and small manufacturing facilities. Investing in a CORMAK screw compressor means a significant improvement in working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. Pedpfxerh E Dqo Aftjgr The screw compressor is also equipped with an integrated refrigerated compressed air dryer, which provides dry and clean air while protecting the compressed air system against corrosion and damage. The LUFT 1000 COMPACT oil-injected screw compressor with dryer features a traditional belt drive, resulting in easier maintenance and lower servicing costs. Belt replacement is simpler and less expensive than repairing a direct-drive system, and a worn belt can be easily replaced with a new one. Extended Component Service Life The belt drive also contributes to longer component life. The absence of a rigid connection between the motor and the compressor's working components reduces mechanical wear and stress, helping to extend the service life of the system. The maximum operating pressure generated by this screw compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM electronic control panel, giving the operator access to key machine information and greater flexibility and control over the production process. Key Parameters ✅ Pressure: up to 10 bar ✅ Air output: up to 990 l/min ✅ Motor power: 7.5 kW Technical Specifications Parameter Specification Motor power 7.5 kW Voltage 400 V / 50 Hz Output at 0–6 bar 990 l/min Output at 6 bar 950 l/min Output at 8 bar 950 l/min Output at 10 bar 930 l/min Outlet connection diameter (G) 3/4" Dimensions 1840 × 650 × 1675 mm Weight 400 kg

Condition: new, Year of construction: 2025, functionality: fully functional, maximum load weight: 200 kg, warranty duration: 24 months, Available ex-stock Switzerland – immediate delivery! 24 months warranty Net capacity: Cleaning area: D=900 mm Internal height: 530 mm Loading weight: 200 kg Machine body, internal piping system, control cabinet and washing basket made of stainless steel - 2 washing pumps for efficient cleaning - Weekly timer for heating - Electronically controlled basket drive - Level control Pgedpfx Asw Ic Hneftjr - Lid locking mechanism - Removable filter plate Accessories: 1x transport trolley with pull-out basket Steam extraction Automatic level top-up Oil skimmer, model WE Draining device / floor flushing with hoses and manual ball valve

Condition: like new (used), Year of construction: 2026, Demonstration machine with approximately 9 operating hours Another machine, available immediately (ex works Neckartailfingen) *Options available at an extra charge - see below Included: + Profile rotor for higher throughput We would be happy to provide a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via a freight forwarder, and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3-phase Knives: 15 pieces, reversible Option: double knife row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting chamber opening: 630 x 820 mm Hopper volume: approx. 0.6 m³ Hydraulically actuated slide Screen mesh size as desired (10 - 40 mm) Suction nozzle Ø 160 mm Weight: approx. 1,300 kg Dimensions (L x W x H): approx. 1737 x 1167 x 1650 mm Psdpfxsb Ny Eys Aftjgr Moisture content: < 30% (dry basis) . Standard included: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 RPM for high throughput - Cycle control to avoid idle times - Performance-enhancing stepped control of the hydraulic slide - Pertinax guides for hydraulic slide - Vibration-damping machine feet - CE compliant . Optional shredder features at an extra charge: - Raise the shredder by 30 cm (preparation for a conveyor belt) + €2,080 net - Eco-rings: + €1,980 net (recommended for more than 20% hardwood) - Double knife row + €995 net - Special scraper + €990 net (recommended when shredding veneer or paper, or items with a material thickness of less than 3 mm) - Articulating conveyor belt + €8,770 net Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm - Automatic overband magnet + €5,980 net Alternatively, a fixed magnet block above the conveyor belt for regular manual removal + €990 net (in case of low metal content) - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) alternatively, manual start and stop of the belts + €595 net . Requirements for the raw material: - The moisture content (dry basis) must be below 30% - Installation temperature: temperature-controlled room at a minimum of +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: refurbished (used), Year of construction: 2021, machine/vehicle number: R-00644, load capacity: 165 kg, arm reach: 2,655 mm, controller manufacturer: R-30iB Plus A-size, teach pendant manufacturer: A05B-2256-C101#EGN, Refurbished FANUC R-2000iC/165F manufactured in 2021.12. The robot comes with an R-30iB Plus A-size controller including iPendant. Pgodsztm Avopfx Aftsr   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC  Model: R-2000iC/165F Model Number: A05B-1333-B201 Year of Manufacture Robot: 2021.12 Warranty term (months): 12   Payload (kg): 165 Reach (mm): 2655 Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1090   Controller: R-30iB Plus A-size Year of Manufacture Cabinet: 2021.12 RCC Length (m): 14   Teach Pendant: A05B-2256-C101#EGN Teach Pendant Cable Length (m): 10

Condition: new, Year of construction: 2026, functionality: fully functional, AURORA MP150 Pressure Parts Washer The AURORA MP150 pressure parts washer is a compact workshop cleaning machine designed for cleaning mechanical parts, tools, and components. The enclosed working cabinet helps reduce liquid splashing, while the operating pressure of 5–8 bar makes it easier to remove oil, grease, carbon deposits, and other stubborn contaminants. The parts washer uses a closed-loop cleaning solution system, allowing the cleaning fluid to be reused during ongoing work. The dual-function pneumatic gun enables both cleaning with a mixture of cleaning solution and compressed air and subsequent blow-off and drying of cleaned components. AURORA MP150 Workshop Parts Washer – Key Advantages 5–8 bar operating pressure – effectively removes oil, grease, carbon deposits, and other contaminants, including from hard-to-reach areas. Dual-function pneumatic gun – enables cleaning with cleaning solution and compressed air, as well as blow-off cleaning using compressed air alone. Podoztwg Sspfx Aftjgr Closed-loop cleaning solution system – helps reduce cleaning agent consumption during regular operation. Working cabinet lighting – provides better visibility of cleaned surfaces, openings, and hard-to-reach areas. Integrated work gloves – make it easier to handle components without opening the cabinet. Lid support cylinders – make opening and closing the working chamber easier. Cabinet ventilation – supports air circulation while the machine is operating. Compact benchtop design – the parts washer can be placed on a stable and sufficiently strong table or workbench. Parts Cleaning Concentrate Included The MP150 parts washer comes with 2 liters of concentrate for workshop parts washers. When preparing a 10% solution, the concentrate is sufficient to produce up to 20 liters of ready-to-use cleaning solution. The appropriate concentration should be selected according to the type of surface, the nature of the contamination, and the cleaning method used. Recommended Solution Concentration Immersion cleaning: 5–10% Low-pressure cleaning: 2–10% High-pressure cleaning: 2–5% Concentrate pH value: 12.8 Parts Washer with Dual-Function Pneumatic Gun The AURORA MP150 is equipped with a pneumatic gun featuring two operating modes, allowing a single device to perform both thorough cleaning and blow-off drying of components. In cleaning mode, a mixture of cleaning solution and compressed air is discharged from the nozzle. The pressurized stream helps remove contaminants from openings, channels, recesses, and surfaces with complex shapes. After cleaning, the gun can be switched to blow-off mode. Compressed air removes residual cleaning solution from surfaces and hard-to-reach areas, making it easier to prepare components for further use, inspection, repair, or assembly. The AURORA MP150 Parts Washer Comes as Standard With Dual-function pneumatic gun Integrated work gloves Interior cabinet lighting Ventilation system Lid support cylinders Compressed air supply adjustment 2 liters of concentrate for workshop parts washers Technical Specifications Specification Value Cabinet capacity 150 l Cleaning solution tank capacity 8–14 l Operating pressure 5–8 bar Dimensions 770 × 610 × 700 mm Weight 29 kg Gun Dual-function pneumatic Cabinet lighting Yes Ventilation Yes

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 171210 € 3235.87 € 610 mm 590 mm 600 x 300 mm 600 x 300 mm 0 - 25 m/min 0 - 4000 mm/min 0,001 mm 350 mm 450 mm 0 - 3800 mm/min 0.001 mm 600 - 3600 1/min 11 kW 3103 mm 3933 mm 2480 mm 5800 kg 810 mm 314 kg 420 kg 405 x 50 x 127 mm 2,4 / 3,9 kW 3.9 kW 0,005 mm 0,003 mm Rigid machine construction with a movable column for effective stability to ensure high grinding performance and machining accuracy Pgedpfx Afoy Uba Uotor Smart iControlIV control with 15" touchscreen with electronic wired handwheel PC-based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multi-groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 6 angular contact ball bearings (4 front and 2 rear) All 3 axes with precision ball screws and AC servo motors A balancing system is attached to the spindle housing to reduce stress on the machine structure Full enclosure with lighting Electromagnetic chuck Coolant system 200 l/min with drum paper filter and magnetic separator Driven wheel dressing device mounted on the table, 1.5 kW, with double support, width 100 mm, diameter 35 or 52 mm Grinding wheel Grinding wheel flange Grinding wheel balancing scale Heat exchanger for the control cabinet Machine and equipment compliant with CE regulations Operating instructions in GERMAN or ENGLISH Accuracy standard ISO 1986-1 OPTIONS (prices on request): Linear encoders for Y and Z axes Oil mist collector

Condition: new, neu ca. 6 Monate ab Auftragse 162560 € 3072.38 € 1200 mm 730 mm 1200 x 600 mm 1200 x 600 mm 1300 mm 5 - 30 m/min 0-2250 mm/min 0,001-32 mm 685 mm 560 mm 0-675 mm/min 500-2200 1/min 11 kW 5.5 kW 3.1 kW 3.1 kW 4790 mm 3207 mm Pjdowiqq Espfx Aftogr 2305 mm 8100 kg 1150 kg 1600 kg 405 x 75 x 127 mm 0,0001 mm iSurface control with Touch screen for 3 axes fully automatic surface and plunge grinding system 10.4” TFT high resolution color control to ensure ease of operation Rough increment, finish increment, spark out (0-9 times), and automatic grinding cycle Cycle interrupt, flip over for part inspection & final dimensions set Wheelhead will rise up to end, start or reference positionnd table parks at left or right side after cycle is completed Display accuracy 0.0001mm I/O diagnosis & alarm display Max. table speed (X axis) 30 m/min Integrated machine-body temperature control Double V table ways are coated with Turcite-B. Table is driven by hydraulic system with cooling unit Liner guideways coupled with precision ballscrew and AC servo moter for precise position on Y and Z axes Automatic lubrication system with a pressure switch to detect and shut down themachine when lubrication system is down Wheel flange with scale, clamping width 43~50 mm (1.7"~2") Grinding wheel Ø405x75xØ127mm (Ø16"x3"xØ5") double recessed Electromagnetic chuck 1200 x 600 mm Automatic dressing and compensation system (mounted over the wheel) LED machine lamp Integrated oil cooling system for lubrication, hydraulic and spindle Splash guard Double-sided water baffle Heat exchanger for electric cabinet Oil Film Guideway system Air purge spindle According to "CE" regulations Operating manual in English or German OPTION (PRICE ON REQUEST): Fully enclosed splash guard

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 156920 € 2965.79 € 1200 mm 850 mm 1200 x 500 mm 1200 mm 1200 500 mm 5 - 30 m/min 0 - 5000 mm/min 0,001 mm 560 mm 0 - 2000 mm/min 0.001 mm 500 - 2200 1/min 11 kW 3.7 kW 3.1 kW 2.4 kW 4600 mm 2950 mm 2745 mm 4610 x 2290 x 2500 mm 6400 kg 900 mm Pedpfxswiryzo Aftogr 930 kg 1250 kg 405 x 50 x 127 mm Smart i control with 10.4" touchscreen on a swiveling panel, with electronic wired handwheel - RS232, USB I/O connection - SMART Grind Cam (dxf transfer in G code) -PC based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 6 angular contact ball bearings (P4, checkout 7) Air purge spindle Longitudinal guides with double V shape, with Turcite-B coating Transverse and vertical feed with precision ball screws (class C2) and servo motors Longitudinal feed hydraulically Linear scale on Y-axis 675mm Fully enclosed splash guard with lamp Electromagnetic chuck plate 1200 x 500 mm Coolant system with automatic paper filter and magnetic separator automatische Abziehvorrichtung am Tisch montiert, ohne Diamant, mit automatischer Kompensation * Grinding wheel Grinding wheel flange Grinding wheel balancing scale Heat exchanger for electric cabinet Machine and equipment in accordance with CE regulations Operating manual in GERMAN or ENGLISH PRICE FOB TAIWAN * The exact configuration of the dresser must be clarified before ordering

Condition: used, Year of construction: 1993, Additional title: Microfiltration Material: stainless steel Pedpeztwz Nsfx Aftjgr Base construction: on stainless steel frame with feet Features: 32 filtration modules, pumps, pipes, valves, control cabinet

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, overall weight: 7,000 kg, operating pressure: 220 bar, pressure (max.): 220 bar, number of previous owners: 1, Equipment: documentation/manual, type plate available, Manufacturer: GEA / Niro Soavi Psdevvmzzepfx Aftegr Model: NS 5160 H Year of manufacture: 2004 Capacity: 10,000 - 20,000 l/h Max. operating pressure: 220 bar Number of pistons: 5 pistons Number of stages: 1 stage Including control cabinet (in excellent condition, recently renewed) Condition: very good

Condition: excellent (used), Year of construction: 2013, Equipment: documentation/manual, Machine KraussMaffei KM650-4300 GX Clamping force kN: 6500 Clearance between tie bars ( h x v ) mm: 1110 x 960 Mould opening stroke mm: 1450 Mould height min. mm: 450 Mould height may. mm: 1000 Ejector stroke mm: 250 Screw diameter mm: 90 (mixing HPS-M) L/D ratio: 20 Injection pressure bar: 1839 Stroke volume cm3: 2290 Control version: MC5 Screen text: Germany Condition: Checked, ready to work Equipment: \- Anti-vibration levelling pads \- BluePower - Servo pump drive for lower energy consumption \- Wear resistant plasticizer, surcharge \- BluePower - Complete insulation of plasticizing cylinder for lower energy consumption \- 2 x pneumatic valve on moving platen for blow function \- 2 x pneumatic valve on fixed platen for blow function \- Pneumatic cascade control, 4-fold for hotrunner \- Hydraulic cascade control, 4-fold for hotrunner \- Conveyor control \- Mechanical robot interface according to EUROMAP 18 \- Hydr. actuated ejector plate including tapped holes and clearance holes in the moving platen for ejector bolts \- Hydraulic core pull system 2-fold on moving platen \- Hydraulic core pull system 2-fold on fixed platen \- Pneumatic core pull system 1-fold on moving platen \- Pneumatic core pull system 1-fold on fixed platen \- Pressure relief for hydraulic core pulls \- Pressure relief for hydraulic cascade valves Pgedey Apdqspfx Aftsr \- 20 hotrunner control circuits \- Combination of sockets (3 Sockets, single phase, 2 CEE sockets 16 A, 1 CEE socket 32 A) \- Potential-free contact for signal "plasticizing" on socket HAN 3 A \- Switch over to holding pressure depending on cavity pressure (Kistler) \- Quality statistics \- Chip card reading unit \- Graph display and analysis package with 10 graphs \- Trend graphics \- PV-closed loop control \- Interface for production data consisting of 5 potential free contacts inside the control cabinet \- 3 free programmable in- and outputs in the control cabinet: KraussMaffei Linear Robot LRX 350: \- Fully integrated control \- Horizontal stroke: 4000 mm \- Vertical stroke (telescopic): 2000 mm \- Demolding stroke: 1200 mm \- Maximum payload: 35 kg

Condition: used, Year of construction: 1998, Refrigeration plant with 70 kW complete with compressor, condenser, in-house cooling tower, plate heat exchanger for glycol cooling and control cabinet. Refrigerant: Ammonia Additional title: Refrigerant: Ammonia Cooling capacity: 70 kW Pjdpfx Aszty Ileftsgr Design to: -8 °C Design tc: 27 °C Power: 15 kW Operation / Control: Control cabinet with hardware control Features: Compressor, condenser, plate heat exchanger, glycol cooler, in-house cooling tower, control cabinet

Condition: ready for operation (used), Year of construction: 2013, overall weight: 1,092 kg, load capacity: 90 kg, arm reach: 3,096 mm, number of axes: 6, This 6-axis KUKA KR 90 R3100 extra was manufactured in 2013. It features a load capacity of 90 kg and a range of 3096 mm, making it suitable for various applications. The machine includes a KUKA KRC4 control cabinet and a smartPAD teach pendant for enhanced usability. If you are looking to get high-quality robotic capabilities, consider the KUKA KR 90 R3100 extra robot arm we have for sale. Contact us for further details. Pjdjzty Acepfx Aftegr - Controller Model: KRC4- Year of Manufacture (Robot): 2013- Year of Manufacture (Controller): 2013- Robot Weight: 1092 kg- Controller Weight: 150 kg- Load Capacity: 90 kg- Range: 3096 mm- Supply Voltage: 3x400V- Frequency: 50/60Hz- Full-Load Current: 20A- Mains Fuse: 25A- Included Accessories / Components:- KUKA KRC4 Control Cabinet- KUKA smartPAD Teach Pendant- Base mounting plate with leveling bolts- Upper arm extension fixture / junction box assembly

Condition: good (used), Year of construction: 1980, Diesel emergency generator Pedpfxet In Nyo Aftsgr Manufacturer: MWM Mercedes - AEG, Year: 1980, with switchgear cabinet and cooler. Diesel engine: MWM, 8 cylinders, 405 hp Operating hours: 303.7 hours Generator: AEG, Type: SIRI 100 D/4, 330 kVA.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, total width: 120 mm, total length: 220 mm, total height: 245 mm, usable tank capacity: 3,300 l, Safe compliant with Valrem. Fire resistance > 120 minutes Pedpfjykapfjx Aftsgr External dimensions: Length: 220 cm Width: 120 cm Height: 245 cm Internal dimensions: Length: 170 cm Width: 95 cm Height: 210 cm

Condition: used, functionality: fully functional, For sale is a Gránit-Mill 90 pellet press in good condition, suitable for pellet production or use in the animal feed industry. The main components of the machine are: * Pre-hopper * Feeder screw * Permanent magnet * Conditioner * Press * Control cabinet Motors: * Pre-hopper motor: 1.1 kW * Feeder motor: 1.5 kW * Conditioner motor: 15 kW * Table motor: 0.55 kW * Main motor: 90 kW Accessories: * 2 stickers * 1 set of grooved rollers (total of 2) Additional information: The control cabinet was originally designed for the simultaneous operation of two presses, but it is also possible to control the presses separately. Price: * 1 Gránit-Mill 90 press with complete accessories and control cabinet: 29,000 EUR * When purchasing two presses together: 44,900 EUR The machines can be viewed at our location by prior arrangement. Further technical information, photos, and videos are available upon request. Pgsdjzc Eudepfx Aftor

Condition: good (used), Year of construction: 1998, Neat used punching machine from Euromac Type CX 1000 30 Capacity 30 ton Unloading 1000mm Overwrap up to 10000mm Including drawer cabinet with lots of tooling and multitool Psdezulx Eopfx Aftogr