Used Sacmi Sacmi Ph380 Hydraulic Press for sale (25,891)

Condition: as good as new (ex-display), Year of construction: 2020, pressing force: 400 t, Hydraulic 400 to column press suitable for continuous shift operation, with these basic data: a) Closing speed 100 - 450 mm/sec. b) Opening speed 50 - 250 mm/sec ( adjustable via touch screen ) c) Pressing speed 5 - 60 mm/sec ( adjustable via touch screen ) d) Piston accumulator with approx. 4 nitrogen bottles e) Table size (clamping surface) 2700 x 1700mm ( seen from the front, between the columns ) f) Total table size 3400 x 1700mm g) 28 T-slots according to customer requirements h) Table, ram and press head are annealed stress-free. i) column diameter 250 mm j) slide size 3400 x 1700mm (clamping surface 2700 x 1700mm ) k) Total size of the machine approx. 3900 x 2200 ( at the bottom ) x 5700 mm height l) Oil temperature monitoring ( adjustable via touch screen ) m) Automatic lubrication ( adjustable via touch screen ) n) Free positioning of the ram ( adjustable via touch screen ) o) KEYENCE light barriers 14 mm on front and rear side p) Circuit oil cooling ( adjustable via touch screen ) q) Pressure holding valve 0 to 600 sec. ( adjustable via touch screen ) r) Table top size 3400 x 1700mm, plane milled s) Laterally monitored doors, 1200mm high, 1000mm wide t) RITTAL control cabinet, 2200 mm wide, up to 20 m from the press u) Pressure setting from 50 to 400 tons ( adjustable via touch screen ) v) Travel limitation optionally via pressure or position w) Programming mode, set-up mode, single stroke + continuous stroke (adjustable via rotary switch ) x) Swivelling control panel with 15 inch touch screen monitor y) Two-hand operation on both sides z) Prepared for automatic material feed ( SIEMENS S 7 1500 ) Dsdpfxog Iihwo Ah Neuu aa) Machine body primed and painted bb) assembly, commissioning, instruction against separate charge The hydraulics of the presses we offer are completely based on BOSCH-REXROTH/Parker/HAWE components. In the switch cabinet only components are used (SIEMENS) which are easily available in Germany. The safety technology comes completely from SICK except for the light barriers. The control system is supplied by SIEMENS. ( S 7 1500 ) as well as the touch screen monitor with 15 inch. The SIEMENS remote maintenance unit SECOME -Ethernet is included in the scope of delivery. SPECIAL FEATURE: the design chosen by us with two press cylinders and the piston accumulator make it possible to supply the full power with a main motor of 90 kW. Below under 1.3 the technical details Technical data Press design Press design Column press Thermally neutral 80 - 120 °C Number of operating sides 2 sides Forces Pressing force max. 4,000 kN Free ripping force max. 600 kN Pressure build-up time Closed tool steel to steel Max. 2 sec. Dimensions - intended minimum tool height 600 mm Max. Opening width 1600 mm Stroke and min. opening 1000/600 mm Table height above floor 820 mm Height above floor (headroom) approx. 5700 mm Hall height min. 7000 mm Parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.17 mm/m Weight Total weight of the press without operating materials approx. 52 To Speeds ( see attached cycle diagram ) Fast closing 100 - 450 mm/s Pressing speed At F max.

Condition: as good as new (ex-display), Year of construction: 2018, machine/vehicle number: DF0151 - Rev.00, pressing force: 110 t, pressure:110 t passage width:800 mm Dujdpfodxrqwjx Ah Nju stroke:500 mm Approx. weight (w/o operational materials):5 t Measurements L x W x H:ca. 1950 x 1510 x 3145 mm Return Capacity:11 t Engine Output:20 kW Cylinder diameter:200 mm Max Working height:700 mm Approaching Speed max. :195 mm/sec Pressure Speed:1 - 15 mm/sec. Return Speed:5 - 140 mm/sec Travel:500 mm Ram plate:800 x 600 mm Thickness of ram plaet:6 Zoll Table size:800 x 700 mm Table height above ground level (approx.):900 mm Oil Tank Capacity:400 l Program Memory:200 prgms Monitor Siemens:10 Zoll Siemens Control System:S7 1200 Lightcurtains by Schmersal:700 mm Speed controlled via proportional valve for speeds between 5 to 195 mm/sec on approach, 1 to 15 mm/sec during pressure phase and 5 to 140 mm/sec during return. HMI - pressure regulation for capacity of hydraulic cylinder from 20 to 110 tons Siemens remote access for maintenance purposes Motor with energy efficiency level IE3 according to CE

Condition: new, Year of construction: 2018, machine/vehicle number: DF0280, pressing force: 160 t, pressure:160 t passage width:1000 mm stroke:800 mm total power requirement:22 kW weight of the machine ca.:13 t dimensions:2300 x 2850 x 4000 mm return capacity:16 t Table dimensions:1430 x 1000 mm :1430 x 1000 mm table height over floor:850 mm pre-running speed:200 mm/sec return speed:200 mm/sec Pressure Speed:15 mm/sec :400 l Oil cooling (electric):1,5 kW (max) Max Working height:1000 mm Dujdpfx Aod Ap Udsh Nsu :200 mm/sec Monitor:10 Zoll

Condition: new, pressing force: 20 t, machine/vehicle number: DF0233, pressure:20 t stroke:600 mm table surface area:2000 x 600 mm dimensions:ca. 3500 x 1200 x 2800 mm total power requirement:3 kW pre-running speed:9,9 mm/sec return speed:25 mm/sec Pressure power:180 bar :100 l weight of the machine ca.:3 t :5 Zoll Dusdpjfxyi Ssfx Ah Neu

Condition: like new (used), Year of construction: 2019, pressing force: 400 t, pressure:400 t stroke:900 mm Table dimensions:1200 x 1200 mm Dsdpfjfh Izmjx Ah Neuu Deep-Drawing Pillow:150 t travel away deep-drawing pillow:280 mm Daylight Opening:1100 mm

Condition: used, Year of construction: 2019, pressing force: 200 t, pressure:200 t stroke:800 mm total power requirement:25 kW draw back pressure:16 t :1 Stück Column-Diameter:150 mm dayligth:1200 mm Ram Height:1000 mm Ram size:1300 x 2220 mm table surface area:1500 x 1300 mm :1300 x 2220 mm :820 mm table surface area:1500 x 1300 mm table height:800 mm table load:8 t pre-running speed:1 - 9,8 mm/sec return speed:2,5 - 25 mm mm/sec quantity of oil:300 l weight of the machine ca.:17 t Duedpfx Ahsd E Irlj Neu Dimensions (L/W/H):2420 x 1300 x 4782 mm :0 - 200 T :1 - 10 mm :elektrisch

Condition: new, RHTC 100 TON M/H-M/C-2 Hydraulic Press Model 100 TON M/H-M/C-2 Year 2025 Condition New Duedpfexwk E Aex Ah Nsu Stock Number 2796 Working Width 1000 mm Stroke 380 mm Max Capacity 100ton

Condition: good (used), Year of construction: 1982, Hydraulic press JKM Kindsmüller UPS 100 E – 110 tons For sale: a hydraulic workshop/industrial press, JKM Kindsmüller, type UPS 100 E. Technical specifications: * Pressing force: 1100 kN (110 tons) * Operating pressure: 283 bar * Stroke of upper piston: 700 mm * Year of manufacture: 1982 Dodpfx Ahjy Unl Rs Nouu * Control system overhauled/renewed in 1992 * 400 V connection The machine can be inspected by arrangement.

Condition: used, Pneumohydraulic cylinder TOX Pressotechnik Hydro-pneumatic press, power pack Type: S 04.00.050.12 D No.: 208696.460 Year of manufacture approx. 2000 Pressure capacity: 4.0 tons at 10 bar Pressure capacity: 3.0 tons at 8 bar Pressure capacity: 2.6 tons at 7 bar Pressure capacity: 2.4 tons at 6 bar Pressure capacity: 2.0 ton. at 5 bar Pressure capacity: 1.6 ton. at 4 bar Pressure capacity: 1.2 tons at 3 bar Total stroke: 50 mm Power stroke: 12 mm Piston rod: Ø 30 mm Thread for piston rod: M22 x 2 mm Compressed air requirement: 3 to 10 bar - Electronic oil pressure switch with TOX digital display for force measurement, type 167282 - Height only power pack with piston rod = 610 mm - Height of power pack hydropneumatic cylinder only = 560 mm - Additional base plate 160 x 160 x 20 mm - Plunger plate: Ø 68 mm Space requirement L x W x H: 160 x 160 x 660 mm Weight: 21 kg Very good condition Dusdju D Tz Uopfx Ah Neu 3 pieces available, price per piece

Condition: used, Year of construction: 2015, pressure 30 t stroke 300 mm daylight between the columns 700 mm dayligth 850 mm 140 mm diameter of piston 60 mm table surface area 700 x 390 mm weight of the machine ca. 0,35 t dimensions of the machine ca. 1,2 x 0,8 x 2,2 m Workshop Press - Movable cylinder - 2 support prisms - Emergency stop device Dujdpfx Aoy Umbwoh Neu

Condition: used, Hydraulic punch, punch frame for use with JOKA punching units type HP-S Hydraulic hole punch, hydraulic press for punching brackets Year of manufacture: approx. 1995 Pressing force: 5 tons Throat depth: 155 mm Stroke: approx. 20 mm Punching unit width: max. 54 mm Punching unit installation height: max. 220 mm Die holder: Ø 48 mm Motor output: 1.5 kW Power supply: 230 Volt, 50 Hz - Suitable for universal use with JOKA SW 20 or SWD 20 punching units - Throat depth of punching units can be larger, can be pushed through to the rear - Stroke release via electric two-hand control Dusdpoltrmujfx Ah Neu - Hydraulic power pack HAWE, type HCW 4 / 2.5-B 1/400-1 - On subframe, mobile Required space (L x W x H): 1100 x 800 x 1450 mm Weight: approx. 200 kg Good condition

Condition: used, Single-column hydraulic press MAE type S63SZ SO . 551277 Year of manufacture approx. 1977 Nominal pressing force: 63 tons Pressing force: 50 tons (practically tested) Throat depth: 320 mm Table area: 850 x 630 mm Ram area: 1050 x 500 mm Ram stroke: 500 mm Max. installation height: approx. 730 mm Table height above floor: 970 mm Hydraulic tank capacity: 600 liters Drive power: 15 kW Power supply: 380 Volt, 50 Hz - Hydraulic draw cushion below the table with bores through the tabletop - Two-hand operation - Electrical control cabinet damaged Required space (L x W x H): 2000 x 1200 x 3420 mm Dusdpfodzp Trjx Ah Nsu Weight approx. 5 tons The machine is operational, the control cabinet is mechanically damaged. During test run, the machine achieves a pressing force of 50 tons, presumably a pressure relief valve is venting.

Condition: used, Single-column hydraulic press with draw cushion RÖCHER Type REP 100.01 SZ Hydraulic deep-drawing press Machine No. 15.499 Year of manufacture 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with a drop-through hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Draw cushion force: 40 tons (400 kN) Draw cushion stroke: 200 mm Draw cushion area: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Hydraulic operating pressure: max. 300 bar Hydraulic tank capacity: 700 liters Approach speed (rapid traverse): approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Dujdpeyupulofx Ah Nou Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Power supply: 400 Volt, 50 Hz (63 Amps) - Operation and programming via PC 670 touch panel, keyboard and mouse - Machine control via SIEMENS S7-300 PLC system - Ram stroke and press force programmable via control system - Draw cushion with drawing and ejector function - Draw cushion force infinitely adjustable - Ram and draw cushion equipped with direct linear measurement system - Draw cushion can be moved in and out under the press area, for punching work using the drop-through hole - Floor-level installation, draw cushion does not penetrate the floor - Pressure and stroke cutoff - Fixed stop with indirect measurement system - Pressure holding time infinitely programmable - Table with holes for the draw cushion ram rods - Ram with ejector - Knock-out damping - Stroke triggering via two-hand operation, foot switch, hand lever and push button on the control panel - LEUZE light barrier as reach-in protection for safety operation - Front mirror columns on the press table can be shifted laterally - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose connections for tool tempering or cooling at the ram - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirements (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new

Condition: used, Hydraulic Synchronizing Press, Spotting Press AGEO Type GHP 200 H6 4-Column Hydraulic Press, Tool Trial Press, Spotting Press Serial No. 21169 Year of manufacture: 1993 Pressing force: 200 tons Clearance between uprights (front): 1200 mm Upright opening (side): 650 mm Table surface: 1560 x 1010 mm Ram surface: 1560 x 1010 mm Ram stroke: 575 mm Draw cushion stroke: 300 mm Draw cushion holding force: 63 tons Draw cushion ejector force: 30 tons Max. installation height: 775 mm Table height above floor: 1000 mm Guide column Ø: 140 mm Clamping pin bore in ram: 64 mm Pressing speed: 0 to 10 mm/s, stepless Return speed: 0 to 20 mm/s, stepless Main motor power: 22 kW Control pump motor power: 5.5 kW Connection: 400 Volts, 50 Hz Dsdpfx Ahjwva I He Njuu - Table and ram with 22 mm T-slots - Two pressure cylinders with electronic precision synchronization control - Stepless electronic stroke limitation (top and bottom with digital travel measurement and position display) - Mechanical safety support device (prevents ram from dropping due to dead weight) - Single-hand and two-hand operation - Electrical tool safety via signal contact - Pressure presetting independent of stroke (via keypad, digital pressure display) - Travel measurement system right and left via rotary encoders - Electrical control: MS-DOS PC with Ageo H v2.23 control software - Operator panel with swiveling display - Stroke movement and press force adjustable via joystick - Adjacent hydraulic power unit with electrical cabinet - Hydraulic draw cushion under the press table - Draw cushion with ejector function - Continuous stroke control - Floor-level installation - Electrical oil temperature monitoring - Operating manual with circuit diagrams Space required by press (upright) L x W x H: 1800 x 1010 x 3470 mm Space required for horizontal transport L x W x H: 3500 x 1800 x 1200 mm Net weight press: 13 tons Space for hydraulic power unit L x W x H: 1000 x 800 x 3040 mm Net weight hydraulic power unit: approx. 1 ton The machine was used as a tool trial press in a toolmaking workshop. Very good condition.

Condition: used, High-performance baler MACFAB - BEMA type 650A Hydraulic press for packaging waste, recyclable renewable raw materials, secondary raw materials Manufacturer no. MF J0162 Year of manufacture 2021 Pressing force 50 tons. Press plate stroke approx. 1000 mm Cycle time per stroke approx. 40 sec. Dsdpfxsvq Rtko Ah Njuu Pressing chamber floor area 1500 x 1100 mm Pressing chamber height 1650 mm Filling opening 1500 x 870 mm Filling height approx. 1250 mm Bale format 1500 x 1100 mm Bale height max. 1100 mm Hydraulic operating pressure 200 bar Motor power 5.5 kW Mains connection 400 volts, 50 Hz, 12 amps. - with two hydraulic cylinders - Door locking via threaded spindle with handwheel - Pressing operation only with the pressing chamber door closed - 2-hand operation for hydraulic tipping of the finished pressed bale - Free space for manual strapping - Standard industrial bales of 1500 x 1100 x 1100 mm are produced - the highly compressed bale is automatically tipped onto a pallet - only 62 operating hours Space requirement L x W x H 2120 x 1350 x 3220 mm Height for transport with lowered hydraulic cylinders approx. 260 cm Weight 1.8 ton. The machine is in very good condition, as good as new. The press has a new price of EUR 22,200 net at BEMA The BEMA company also buys the packaging waste that you press into bales with this press.

Condition: used, Hydraulic notching machine with adjustable angle SIMASV model AV 220-6PA Serial no.: C1524 Year of manufacture: 1996 Blade length: 220 mm Material thickness (steel): 6 mm Material thickness (stainless steel): 4 mm Table dimensions: 950 x 790 mm Table height: 940 mm Motor power: 3 kW Power supply: 400 Volt, 50 Hz - Operation via push-button or foot switch - Adjustable notching angle from 30° to 140° - Angle adjustment via 2 handwheels (right and left) - Hydraulic clamping for the adjustable blades - Electric foot switch - 2 adjustable stop rails with angle scale - Multiple millimeter scales integrated into the table top - HSS blades newly ground, as new Required space (L x W x H): 1000 x 950 x 1470 mm Weight: 750 kg Duedpfx Ahjrzfh Ho Nju Very good condition

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 pressure force 200 ton. Stand passage front 2050 mm column passage sideways 2030 mm table area 2800 x 2000 mm ram area 2000 x 2000 mm ram stroke 700 mm installation height max. 1850 mm Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Motor power main motor 75 kW Motor power control pump 11 kW Dusdpfx Aedzp Tceh Nju Mains connection 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation - central lubrication - Operating instructions with circuit diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. The machine was used as a production press at Volkswagen until 2000. From 2000 the machine was used as a tool testing press in a tool shop. good condition

Condition: good (used), For sale is a hydraulic hot plate/molding press manufactured by Italpresse. Technical specifications: Dsdpjy Ufqqsfx Ah Nouu Manufacturer: Italpresse Type: GL 14-6/180 Machine designation: PRE46 Press force: 180 t Max. hydraulic pressure: 600 bar Cylinder stroke: 325 mm Opening: 325 mm CE marking present Control system with operating panel/CNC Condition: used, ready for operation Equipment: Enclosed safety cabin Hydraulic press system Hot plate press / molding press Industrial design Electronic control Condition: The machine comes from ongoing production and is in used, functional condition. Inspection possible by arrangement.

Condition: good (used), Year of construction: 1994, For sale is a hydraulic press from the manufacturer Lauffer Pressen. Technical data: Dsdjy Ufqkspfx Ah Neuu Manufacturer: Lauffer Pressen GmbH & Co. KG Type: VSK 0125 Year of manufacture: 1994 Machine number: 10248/14292 Control system: conventional Condition: used, functional Application area: pressing, forming and shaping operations Equipment: Hydraulic press Control panel with displays and controls Safety controls Robust steel construction The machine comes from ongoing production and is in used condition with normal signs of wear and tear consistent with its age. Inspection possible by appointment.

Condition: good (used), Year of construction: 2002, FOR SALE Double Crank Press ARISA 630 Tons Brand: ARISA (Spain) Model: S2-630-350-150-ES Dusdpsy Sl Rlofx Ah Nou Year of Manufacture: 2002 Type: Double crank mechanical press (S2) – High performance Technical Specifications (Certified Data): This press is a heavy-duty production unit designed for extremely high precision on large workpieces. Nominal Force: 630 tons (6,300 kN) Table Dimensions: 3,500 mm x 1,500 mm Slide Dimensions: 3,500 mm x 1,500 mm Slide Stroke: 200 mm Slide Adjustment: 150 mm Working Speed: Variable from 20 to 50 strokes/minute Maximum Force Point: 13 mm before the bottom dead center Electrical & Mechanical Specifications: Motor Power: 92 kW Total Machine Weight: 145,000 kg (145 tons) Striking Energy: Ideal capacity for deep drawing and progressive cutting applications Clutch/Brake System: Pneumatic (required pressure 5.5 – 6 bar) Balancing: Adjustable pneumatic counterbalance Power Supply: 380 V Key Features: Large Working Area: 3.5-meter table allows for complex or multiple tooling setups S2 Stability: Double crank design ensures uniform pressure distribution, preventing slide tipping Condition: 2002 machine compliant with modern safety and control standards.

Condition: used, Year of construction: 2015, functionality: unexamined, total length: 5,270 mm, total height: 7,290 mm, total width: 5,436 mm, overall weight: 100,000 kg, power: 75 kW (101.97 HP), 1200 T HYDRAULIC PRESS WITH ARCH FRAME – MIB-HYDRO (platform not included) History: Year of manufacture: 2015 Date of acquisition: 03/2015 Mid-2018: Operation ceased Until today: Machine disassembled and stored Specifications: Thrust force = 1200 T Type: ARCH FRAME, Bi-Cylinder Maximum operating pressure = 285 bar Pressure control: Analog sensor Stroke control: Analog linear scale Stroke: V1 = 1000 mm Approach speed = 100 mm/s Return speed = 100 mm/s Dimensions of press platens: 2600 x 1400 mm Maximum clearance between platens (at top dead center): V1 = 2000 mm Dsdpfx Ajy T N A Ish Nsuu Slide guide type: (x8) prismatic faces Working height = 1200 mm Mold loading system Control unit: SIEMENS S7-300 Hydraulic power unit power = 75 kW Weight = 100 T Dimensions (H x L x W) = 7300 x 5500 x 5300 mm Contact: Christian LEMBLE Price: 72000 (including VAT) MIB Hydro (your model) / Lemacher Hydraulique / Servopresse / Pinette P.E.I. (heavy presses, composites, stamping) / Schaal Technology (special presses) / Schuler (world leader, presses 800–2500 T) / Siempelkamp (heavy presses, forming, composites) / Wepuko PAHNKE (high-capacity hydraulic presses) / Beckwood / Dunkes (special presses, high precision) / Lasco Umformtechnik (heavy forming presses) / Faccin Group / Boldrini / OMCN / Hydrap Presses / Sangiacomo Presses / Beckwood Press Company (USA) — presses 1000–3000 T / Greenerd (USA) — heavy hydraulic presses / Macrodyne (Canada) — presses 1000–5000 T / Phoenix Hydraulic Presses (UK) / Prensa Juaristi (Spain) / Hidrogarne (Spain) / Hydromec (Italy/Spain) / Ermak Press (Turkey) / Yilmaz Machinery (Turkey) / Industrial cutting Cutting of large-sized parts (carpets, technical textiles, polymers) / Cutting of thick sheets or complex metal parts / Cutting of composites or polymer fibers with multi-punch tools. (Arch frame, bi-cylinder presses are designed to ensure parallelism of the slide, which is essential for these operations.) / Stamping / Forming Stamping of metal parts (steel, stainless steel, aluminum) / Cold or hot forming of structural parts / Shaping of automotive or aerospace parts / Compression / molding Compression of composite materials (SMC, BMC, fibers) / Molding of large technical parts / Pressing of polymer or rubber materials / Punching / cambering / straightening Punching of thick sheets / Cambering of profiles / Straightening of deformed parts (sheets, tubes, bars) / Special applications / Compression of technical powders / Pressure bonding / Mechanical tests requiring high thrust (1200 T) / Automotive industry: Cutting of carpets, foams, technical textiles / Stamping of body parts / Forming of structural parts / Aerospace & space: Forming of aluminum or titanium parts / Compression of high-performance composites / Metallurgy & metal processing: Punching, cambering, straightening / Cutting of thick sheets / Chemical industry & materials: Compression of powders / Molding of technical polymers / Technical textile & polymers: Cutting of large textile parts or polymer fibers / Food industry: Pressing of tools or molds for production / Recycling & recovery: Compression of recycled materials / Forming of parts made from recycled materials.

Condition: ready for operation (used), Hydraulic press, four-column press, Eitel 100T Manufacturer: EITEL Pressing force: 100 tons Overall dimensions: 1900x1100x3300mm Dodpfjuhl E Rsx Ah Njuu Table size: 1050x800mm Stroke length: 400mm

Condition: ready for operation (used), Hydraulic Press Machine, Coil Winding Press Machine, Used Equipment Dimensions: 1340 x 1240 x 2740 mm Weight: 640 kg Electrical Specifications: 400V Hydraulic Pressure: 100 bar Stroke Length: 180 mm Duodpsu Hkfpjfx Ah Nou

Condition: used, Press machine, REMS Power-Press XL ACC, used equipment Manufacturer: Rems Type: Power-Press XL ACC Pressing range: Ø 10 – 108 mm (up to 110 mm) Pressing force: 32 kN Motor: 450 W universal motor Power supply: 230 V or 110 V, 50–60 Hz Weight: approx. 5.5 kg Dimensions (H x W x D): 800 x 335 x 230 mm Cable length: 2900 mm Accessories: more than 400 types of REMS pressing jaws, adapters for other manufacturers Additional features: Dedpfxjxlp T Ie Ah Nouu Automatic retraction (Automatic Circuit Control – ACC) Rotatable pressing jaw holder with automatic lock Compatible with pressing jaws from other manufacturers Fast pressing, e.g., Geberit Mapress stainless steel Ø 108 mm connection in 15 seconds Press jaws: 76.1; 88.9; 108 mm

Condition: good (used), Make: Ursviken Type: VPF 1000/800-5,0 Control: Siemens Simatic panel Duedokvmi Sepfx Ah Nou Year: 1970 Hydraulic press for fabrication off large componts like dish heads tanks boiler shipyard and steelconstruction Renewed in 2015 with Siemens SIMATIC panel and E-Cabinet Rittal Build in height 2950 mm Maximum die height 1500 mm Movable Table & Piston in X-Ways Large package Die tooling radius 10/20/30/50/60/80/100 Pressing force 210 kg/cm2 Maximum stroke 800 mm Machine 2350 mm placed in ground Specifications Metric US Standard Capacity Kg 1000 Ton Distance between column 5010 mm Table Length 3000 mm Table Width 2000 mm Table Height 550 mm Ram stroke 1450 mm Approche speed 50 mm/min. Working speed 5 mm/min. Return speed 50 mm/min. Dimensions (Estimate) Length 0 mm Width 0 mm Height 0 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!