Used Rep S06Y20 for sale (449)

Year of construction: 1997, condition: used, A Trützschler fiber cleaning machine incl. feed table and control cabinet as well as a Trützschler feeding/opening unit for fiber material is offered. 1) A Trützschler CVT3 1600 fiber cleaning machine, year of manufacture: 1997, design: enclosed machine housing, several access doors, several inspection windows, material/air connection in the upper machine area, material feed via a feed table. Including feed table and control cabinet. 2) Trützschler CS feeding/opening unit, year of manufacture: 1988. Inspection possible by arrangement. Nlodpfx Aez Irmyeg Ish

Condition: used, machine/vehicle number: H2X386V04722, Year of construction: 2019, operating hours: 25,272 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,800 kg Lifting height: 6,075 mm Fork carriage adjustment range: 350–1,050 mm Fork length: 1,200 mm MACHINE DETAILS Mast type: Triplex mast with full free lift Drive type: Electric Battery type: 5 PzS Battery year of manufacture: 2023 Battery voltage: 48 V Battery capacity: 625 Ah Rest voltage: 51.3 V Dimensions and weight Dimensions (L × W × H): 3,200 × 1,150 × 2,761 mm Own weight: 3,800 kg Operating hours: 25,272 h Service valid until: 07/2027 UVV (Occupational Safety) valid until: 07/2027 EQUIPMENT 3rd and 4th valve Formerly a Linde full-service machine Facelift model with tilt angle indicator Fork carriage with side shift Lateral fall-through protection, easily removable Nlodpfxjz S Nq Se Ag Ijh White, non-marking tires LED work light at the front LED work light at the rear Road traffic lighting with turn signals Safety light at the front Safety light at the rear Comfort seat with lumbar support Seat heating All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons with a large forklift on-site is possible. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 157

Condition: repair required (used), Year of construction: 1994, functionality: limited functionality, machine/vehicle number: 466EIF712N14 / V47Y10D94502002, clamping force: 1,800 kN, Two REP injection molding machines with platen dimensions 510 x 430 mm, clamping force of 180 t, and injection capacity of 670 cm³. The first machine requires piston repair and seal replacement. The second machine is missing the hydraulic pump, pressure control valve, and control program card. Njdpfx Aeyb Rw Usg Ielh

Condition: excellent (used), Year of construction: 2021, Manufacturer: REP Type: V51CY10 Year of manufacture: 2021 Serial number: V51CY1021128034 Clamping force: 2,500 kN Distance between columns: 630 mm Nlodjzl Dfxopfx Ag Ieh Machine weight: 5,490 kg Quantity: 1 unit Category: Injection molding machines for plastics / packaging Machine type: Rubber injection molding machine.

Condition: repair required (used), Year of construction: 2003, Rubber injection molding machine, REP brand 25 tons Year: 2003 All four columns need to be replaced (estimated cost: €9,000). Nodpfeizi H Hsx Ag Ielh

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 571 EIT 9106/1149, clamping force: 2,500 kN, Injection molding machine REP S, floor dimensions 500 x 630 in working condition with clamping force 250t and injection capacity 968 cm3 Nledpfx Aeyb Icbog Ioh

Condition: excellent (used), Year of construction: 2011, I sell the universal top multiple boring machine with milling for repair works Plug Repair RILESA Rep.-Borem., year 2011. 4 Top drilling spindles 1 Grooving moulding head Nodpfx Aeu N T Skeg Islh Very good condition. Available immediately.

Condition: used, Year of construction: 2015, Technical details: closing pressure: 6600 kN weight of the machine ca.: 45,5 t Nljdpew I E R Nsfx Ag Ijh

Condition: refurbished (used), Year of construction: 2025, machine/vehicle number: A5137, functionality: fully functional, Refurbished 100-ton HEILBRONN C-press, currently undergoing retrofitting - available at short notice. Hydraulic clutch-brake combination, automatic central grease lubrication, manual ram adjustment, mechanical overload protection, new lubrication/hydraulic hoses, etc., new control system (adjustments still possible). Dimensions - see machine drawing as PDF. Technical specifications: Press force: 1,000 kN Speed: 50 rpm (variable speed optional) Variable stroke: 14 - 150 mm Nedpfx Agjwb A Dze Ijlh Ram adjustment: 80 mm Installation height: 420 mm (max. stroke at bottom, adjustment at top) Table: 650 x 500 mm Ram: 400 x 250 mm Thrust: 350 mm Drive power: 5.5 kW Approx. weight: 5,500 kg

Condition: excellent (used), Year of construction: 2011, operating hours: 12,500 h, Ref:11160 . 2011 Muller Martini Acoro A5 Preparation Binder ONLY 12,500 HOURS WORKED! Nljdez Izapopfx Ag Ioh Preparation line for producing lined book blocks for hard cover production or soft bound books. Comprising: Triple hand feed element to spiral raceway element 3641 M.M. 3648 Twin end sheet feeders with Robatech hot-melt gluing M.M. Automatic motorised make-ready with “Commander” control system M.M. ‘Acoro A5’ binder with 20 x 21” Combi-clamps ICS 80 & ICS 30 Hot-melt pre-melt tanks Hot-melt spine gluing Hot-melt side gluing Gauzing/lining unit Pile/rotary cover feeder with pressing & nipping station 2nd nipping station Lay-down delivery unit to; Flat conveyor system (details on request) to; M.M. 3671 ‘Merit S’ automatic pile trimmer with auto setting. Specification: A5/21” Binder book sizes, Max: 430 x 320 mm Min: 140 x 100 mm Book thickness, : 3 -- 60 mm

Condition: used, mileage: 155,388 km, power: 115 kW (156.36 HP), color: red, gearing type: automatic, loading space length: 71,200 mm, loading space width: 24,600 mm, loading space height: 26,900 mm, Equipment: ABS, central locking, power assisted steering, For inquiries regarding the vehicle, please contact Mr. Seidel (tel. ). Mercedes-Benz Atego 816 L 4x2 box van Nlsdpfx Ago Aftnys Ish A1M front axle, 4.1 t, A2B rear axle, crown wheel 325, hypoid, 6.2 t, A5L axle ratio i = 3.417, B1B electronic braking system with ABS and ASR, B1C electronic compressed air supply unit, low, B2A disc brake, on front and rear axles, B4A condensate monitoring, for compressed air system, C2S wheelbase 4820 mm, C5I fastening parts, for platform body, C6A steering ZF 8090, C6S stabilizer, for extreme high loads, rear axle, C7A rear underrun guard (ECE), C7M protective device, side, weight-optimized, C9L extended frame overhang, 200 mm, D1B driver's air-suspended seat, standard, D1M passenger's fixed seat, simple, D1Z center seat, with 3-point safety belt, D3X seat cover, flat weave, D4A standard cockpit, D6Y pollen filter, D7L storage compartment, above windshield, 1 compartment, D8A roof hatch/ventilation flap, roof, E0Y battery cover, E1E batteries, 2 x 12 V/100 Ah, maintenance-free, E1N generator 28 V/100 A, E5A switch No. 1 for external body electrical system, E6Y reversing warning, combined with hazard warning lights, F1X S cab ClassicSpace, 2.30 m, tunnel, F6I front mirror, heated, F6J main mirror, electric, driver's side, F7W cab entry, single-step, F8D 2 vehicle keys, extra, F8L immobilizer, with transponder, G0U economy driving program, G1B transmission G 70-6/5.94-0.74, G5G Mercedes PowerShift 3, I0E tires tubeless, 215/75 R 17.5 front/front axle, I4A wheel formula 4x2, I5Q 7.5-tonne, I6W leaf spring suspension, rear axle, J1A instrument cluster, 10.4 cm, J1R digital tachograph, EC, speed, ADR, J1S tachograph manufacturer VDO, J2B CD radio, Bluetooth, J3N Fleetboard Eco Support, J9D pre-wiring for toll collection, K0E plastic tank 120 l, left, K3T AdBlue tank 25 l, K5M tanks, lockable, K5S protective cap for AdBlue dosing system, K7I exhaust system, on the frame on the right, tailpipe facing inward, L1B daytime running light, L1H fog lights, halogen, M0S noise encapsulation, according to ECE, M1H engine OM934, R4, 5.1 l, 115 kW (156 hp), 650 Nm, M5M engine version Euro VI, with OBD-C, M5U engine brake, standard system, Q1C front spring 3.4 t, parabolic, Q2A rear spring, 4.6 t, parabolic, R0Z wheel nut cover, R1A steep shoulder rims 6.00 x 17.5, S1D stability control assistant (ESP), S1H lane keeping assist, S1P Active Brake Assist, S5A speed limiter 90 km/h / 56 mph, ECE, S5Z cruise control, T0G weight variant 7.49 t (3.4/4.6), X2T maintenance documentation, Y1G assignment cab paint, top coat line 2, Z4D inline engine, 4 cylinders, Z5B OM 934, cargo space dimensions: L 7.120mm W 2.460mm H 2.690mm, tire tread: 1st axle 9mm, 2nd axle 5-9mm, permissible total weight: 7.490kg, unladen weight: 5.450kg, payload: 2.040kg Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (tel. ) will be happy to assist you. You can find more information on our website. ... Errors, changes and prior sale are subject to change!!! ESP, particle filter = Further information = Year of manufacture: 2019 Engine displacement: 5,132 cc GVW: 7,490 kg Please contact Tobias Ebert for more information.

Condition: used, functionality: fully functional, Year of construction: 2022, overall weight: 725 kg, total height: 1,310 mm, total length: 2,650 mm, total width: 2,400 mm, load capacity: 500 kg, workBasket Producing company Magni Nsdpfx Agoxpybdj Iolh Type REP 2-4,5 Year built 2022 Height (mm) 1,310 Length (mm) 2,650 Lifting weight (kg) 500 Weight (kg) 725 Width (mm) 2,400

Condition: used, functionality: fully functional, Year of construction: 2022, overall weight: 725 kg, total height: 1,310 mm, total length: 2,600 mm, total width: 2,400 mm, load capacity: 500 kg, workBasket Producing company Magni Type REP 2-4,5 I Nsdpoxpybksfx Ag Ijlh Year built 2022 Height (mm) 1,310 Length (mm) 2,600 Lifting weight (kg) 500 Weight (kg) 725 Width (mm) 2,400

Condition: used, functionality: fully functional, Year of construction: 2022, overall weight: 725 kg, total height: 1,310 mm, total length: 2,600 mm, total width: 2,400 mm, load capacity: 500 kg, workBasket Nledpfx Agoxpyayj Ish Producing company Magni Type REP 2-4,5 I Year built 2022 Height (mm) 1,310 Length (mm) 2,600 Lifting weight (kg) 500 Weight (kg) 725 Width (mm) 2,400

Condition: used, Year of construction: 2005, functionality: fully functional, overall weight: 2,000 kg, The machine cuts A4 or A3 formats into sets of 100 or 200 sheets and simultaneously packs this quantity into slip lid boxes, so that the operator only needs to close and seal the lid. Ideal for materials such as photo paper, inkjet films, and all desktop products distributed in A4 boxes for the home office. Max. master roll width: 1280 mm. The machine is fully functional and connected. Test cutting is possible at any time. We also handle professional dismantling and loading onto a truck/container. Nodpfx Aoxvrm Ssg Iolh

Year of construction: 1985, condition: used, functionality: fully functional, PM 5 Paper Machine + Stock Preparation / Deinking Plant and Goebel U16M An integrated paper production installation in Hainsberg, Germany, is offered for sale. The PM 5 paper machine and its stock preparation/deinking plant are offered together. The Goebel U16M roll slitter rewinder is available separately. PM 5 was built in 1985 and modernised several times. Its main sections include the PAMA approach-flow system and Fourdrinier section; Voith headbox and SpeedFlow system; Valmet top-wire former; and PAMA press, dryer and after-dryer sections, calender and Pope reel. Reported modernisations: Valmet top-wire former (1994); approach-flow system expansion and modernisation (2002–2003); MAP quality-control system (2006); Voith SpeedFlow (2009); automatic tail cutter (2025). PM 5 specifications - Working width: approx. 2,730 mm; trimmed width: approx. 2,640 mm - Maximum speed: up to 600 m/min - Maximum gross capacity: approx. 150 tonnes/day - Basis-weight range: approx. 45–130 g/m² - Grades produced include office, copy, writing, printing, envelope and newsprint papers - Installed electrical power: approx. 2.5 MW - Steam consumption: up to approx. 16 tonnes/hour Stock preparation / deinking plant - Normal capacity: approx. 125 tonnes/day; up to approx. 140 tonnes/day under suitable raw-material and process conditions - Essential components listed in the available technical documentation are reported to remain installed on site - Older Siemens S5 and Teleperm control and automation system Goebel U16M Built in 2005, machine no. 053-9031. - Working width: 2,800 mm - Maximum speed: 2,000 m/min - Maximum unwind diameter: 2,000 mm - Maximum rewind diameter: 1,500 mm - Minimum cutting width: 150 mm - Available accessories include winding shafts and an edge-trim extraction system with shredder and flat turbo disintegrator Nljdoz Hvmhspfx Ag Ijh Operating status and sale terms Production stopped on 23 January 2026. According to the seller, PM 5 and the stock preparation/deinking plant were operating until the controlled shutdown. The Goebel U16M was also reported operational until that date, with no significant functional faults. Asking prices: - PM 5 and deinking plant: €2,200,000 - Goebel U16M: €250,000, offered separately

Year of construction: 2020, condition: used, This listing is for Agilent Technologies Magnis NGS Prep System The unit is in full working condition and ready for immediate use Nedpfx Age Aaq Slj Ielh The Agilent Magnis NGS Prep System is a compact, fully automated benchtop platform designed for next-generation sequencing library preparation. It streamlines complex workflows, offering walk-away automation, consistent reproducibility, and high-quality results for genomics laboratories. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: used, mileage: 500 km, power: 375 kW (509.86 HP), axle configuration: 6x4, color: green, driver cabin: sleeper cab, gearing type: automatic, suspension: air, Equipment: ABS, EBS, air conditioning, - Brake system Nlsdpeyfrqqjfx Ag Ioh Mercedes-Benz Arocs 2651 L 6x4 Short Timber Transporter Loading crane: Palfinger Epsilon TZ 12-98, EBERT short timber body, approx. 6,750 mm between bulkhead and crane, A1D front axle 8.0 t, A1Y front axle, straight execution, A2F rear axle, crown wheel 233, planetary, 13.4 t, A5P axle ratio i = 3.714, B1B electronic braking system with ABS and ASR, B2A disc brakes on front and rear axles, B2D disc brakes with partial protection, B2X parking brake, electronic, B2Z parking brake additionally on front axle, B3K secondary oil retarder, B4A condensation monitoring for compressed air system, B4M compressed air tank, steel, B5A trailer brake, 2-line, brake connections left, C2R wheelbase 4800 mm, C4L rear overhang 2550 mm, C6Q stabilizer, front axle, D0S compressed air connection in cab, D1C driver's air suspension comfort seat, D1N passenger function seat, D2N seat backrest release, driver's seat, D2Y seat belt check, D3B comfort bed, lower, D3Q seat upholstery velour, D4T curtain across bed(s), D4Y sun blind, side, driver’s side, D5Y rubber mats, driver and passenger side, D6F air conditioning, D6I residual heat utilization, D6M hot water auxiliary heater, cab, D7A additional thermal insulation, D7G storage compartment covers, driver and passenger side, D7J drawers under bed, D7K drawer under balustrade, D7R storage lids above windscreen, D7Y luggage shelf, upper, at rear wall, D8N electric roof hatch, D8X low seat box, 40 mm lowered, E0D battery sensor, Hella make, E0F Exide batteries, E1C batteries 2 x 12 V/220 Ah, low maintenance, E1M alternator 28 V/150 A, E3M socket 24 V/15 A behind seat, E3R power socket 24 V/25 A, passenger footwell, E3W PSM 2nd generation, E4C additional functions for body builders, E5H night driving light switch, E5K MirrorCam switch at bed, E6A trailer socket 24 V, 15-pin, E7F cable remote control for air suspension, E9G pre-installation for electrical devices, F0F side module, N3 vehicle, F1E L-cab StreamSpace, 2.30 m, 170 mm tunnel, F5L exterior sun visor, transparent, F5Y A-pillar trim, F6D tinted windscreen with band filter, F6I heated front mirror, F6Q air horn, F6T MirrorCam, F6V MirrorCam chrome holder, lower cover cab color, F7B bumper, corners made of steel, F7D bumper, center part with towing eyes, coupling jaw, F7Y cab entry left/right, movable, F8E central locking system, F8F comfort locking, F8V light sensor, F8W rain sensor, G0K driving program economy/power, G0T Predictive Powertrain Control, G2F gearbox G 330-12/11.63-0.77, G5A single plate clutch, G5G Mercedes PowerShift 3, G5L PowerShift Advanced, I2H tubeless tires 315/80 R 22.5 RA, I2P tubeless tires 385/65 R 22.5 FA/FLS/NLA, I4I axle configuration 6x4, I5F 26.0 tonner, I6I vehicle production plant Wörth, I6X air suspension, rear axle, J1M digital tachograph, 2nd generation, Version 2, ADR, J1S tachograph manufacturer VDO, J2G digital radio, J2K speakers 2-way system, J2U navigation system, J3U requirement Fleetboard Manager App, J3V Truck Data Center 7, J3Z axle load measurement system, J6C Multimedia Cockpit, interactive, J6Y Remote Online, J6Z pre-installation Mercedes-Benz Truck App Portal, J8H omission of rear-view camera, towing vehicle end, J8Y pre-installation for Truck Data Center 7, J9A pre-installation CB radio, 12 V, DIN slot, J9D pre-installation for toll recording, J9P pre-installation and display for up to 4 cameras, K1M tank 510 l, left, 650 x 700 x 1300...

Condition: used, Year of construction: 1988, pressure 200 t throat 450 mm stroke 30 - 140 mm table surface area 1100 x 850 mm dayligth 500 mm ram surface 800 x 600 mm Nlodpsvb I Itjfx Ag Ioh ram adjustment 110 mm tool hole in ram Durchm. 65 x Tiefe 105 mm no. of strokes 45 Hub/min total power requirement 15 kW weight of the machine ca. 14,2 t dimensions of machine L x W x H 3,18 x 2,09 x 3,05 m

Condition: used, Year of construction: 2008, Trepko 104 KSP – Filling & Closing Machine (Year 2008) Well-maintained Trepko 104 KSP inline filling and closing machine, suitable for butter, margarine, spreads, dairy products, and similar applications. Specifications: - Model: Trepko 104 KSP - Serial No.: 3702 - Year: 2008 Nljdpjx A Er Ijfx Ag Ioh - Capacity: Up to approx. 200 cups/min (4 lanes, 50 cycles/min) - Filling System: Servo-driven piston filler for high dosing accuracy - Closing System: Foil heat sealing + option for snap-on plastic lids - Construction: Stainless steel, hygienic design Documentation: - EC Declaration of Conformity - Pneumatic schematics - Manuals included Key Features: - Fully automatic inline operation - Quick format and product changeover - Reliable and robust machine design - Suitable for dairy and food production - Machine has been out of operation for the last two years - Good technical condition, available for immediate sale. Location: Denmark Filling volume: 200, 250, 400, & 500 grams.

Condition: used, Year of construction: 2007, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, feed length X-axis: 2,040 mm, feed length Y-axis: 1,100 mm, feed length Z-axis: 760 mm, total height: 3,500 mm, total length: 7,200 mm, total width: 4,000 mm, TYC FVP 2011 CNC Gantry Machining Center with Horizontal Head Main description PEGAS-GONDA s.r.o., a manufacturer of band saws, offers for sale a TYC FVP 2011 CNC gantry machining center with an interchangeable horizontal milling head. The machine was commissioned in 2007 and has been used exclusively in our production facility in a single-shift operation. It is fully operational, connected to power, and available for inspection under working conditions. Upon prior agreement, a test machining operation and a verification of the machine’s geometric accuracy can be arranged. The machine is being sold due to the modernization of our production technology. Technical specifications Manufacturer: TYC Model: FVP 2011 Machine type: CNC gantry machining center Year commissioned: 2007 Control system: Heidenhain Travel: X-axis: 2,040 mm Y-axis: 1,100 mm Z-axis: 760 mm Working table: Table dimensions: 2,000 × 1,000 mm Maximum table load: 3,500 kg Spindle and heads: Spindle taper: ISO 50 Vertical head speed: 6,000 rpm Horizontal head speed: 3,000 rpm Horizontal head indexing: 5° Tool magazine: Automatic tool changer Capacity: 40 tools Cooling: External coolant supply Internal coolant supply Machine condition Fully operational Connected and ready for demonstration Used in single-shift operation Test machining possible by prior arrangement Geometric accuracy inspection possible Technical documentation available Optional pallet clamping system A pallet clamping system with two pallets can also be supplied. One pallet is located inside the machine, while the second pallet can be used for workpiece preparation outside the machining area. This significantly reduces setup and preparation times. Price Machine price: EUR 82,000 net, plus VAT Optional two-pallet clamping system: EUR 4,167 net, plus VAT Inspection and further information Nedpozp Iqasfx Ag Iolh The machine can be inspected and demonstrated under power at our production facility in the Czech Republic. Additional photographs and technical documentation are available upon request. A personal inspection, test machining, and geometric accuracy verification can be arranged for serious prospective buyers. Location: Slavkov u Brna, Czech Republic Seller: PEGAS-GONDA s.r.o.

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, WMW Niles, Czech Republic Made, CNC(Siemens Controls, Retrofitted in 2020) Floor Type Heavy Duty Lathe ,With heavy Duty Tail Stock, Steady Rest, Rollers, and with 6000 MM X 4000 MM Floor plates Nedpfezww R Sjx Ag Iolh

Condition: used, mileage: 490 km, power: 375 kW (509.86 HP), axle configuration: 6x4, color: green, driver cabin: sleeper cab, gearing type: automatic, suspension: air, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, please contact Mr. Seidel (available by phone). Mercedes-Benz Arocs 2651 L 6x4 short log transporter SCHEMEL short log body, manufacturer: EBERT, dimensions: approx. 6,750 mm between the front wall and the crane, 4 EXTE-D6 stanchions – adjustable with clamping fasteners and lashing ratchets or counter supports for load securing, with 8 EXTE-D5 posts – telescopic, with special Z-profile subframe, 200 mm high in the center of the frame, closed with tear-plate steel, front wall welded construction with internally located special aluminum profiles, approx. 2,600 mm high, 4-part folding and telescopic tarpaulin cover for wood transport, high-quality hose chains and supply lines, with a step ladder for easier access, mounting of side marker lights, access to the crane, double compressed air connections, cover over the battery box and air tank with aluminum tread plate, on both sides, electrical and hydraulic connection (engine start/stop from the crane seat), with oil shut-off valve, with optional pivoting cover for chainsaw etc., holder for snow chains, holder for broom and shovel on the front wall, body primed, vehicle frame black, epoxy resin primed and painted in acrylic quality, oil filling, TÜV inspection – UVV inspection – speedometer check with: Palfinger-EPSILON loading crane Y CRANE ON 2 M 12 Z91 – fully hydraulic wood loading crane M12Z EPSILON loading crane, crane folded to the side, equipment HIC/HD4/04, base unit and crane pillar painted in RAL 7021 black-grey, hydraulic lines protected, integrated operating switch and service interval indicator Nedpfx Agsyfpwns Ielh MZ91_2 Z-arm system 9.1 m, reach: 9.1 m, net lifting moment: 107 kNm, maximum performance: 107 kNm HHC_2 High seat with removable manual control, incl. mechanical pivoting device at the crane pillar (without slewing ring), B1B electronic braking system with ABS and ASR, B1F heater, electronic compressed air supply unit, B1H electric compressed air supply and control, medium, B2A disc brake, on front and rear axles, B2X parking brake, electronic, B2Z parking brake, additionally on front axle, B4A condensate monitoring, for compressed air system, B4M compressed air tank, steel, B5A trailer brake, 2-line, brake connections on the left, C2R wheelbase 4800 mm, C4L frame overhang 2550 mm, C6J steering power pump, unregulated, C6Q stabilizer, front axle, C6U additional stabilizer, rear/trailing axle, D0A leather steering wheel, D0S compressed air connection, in the cab, D1C driver's suspension seat, comfort, D1N co-driver's functional seat, D2N seat back, release, driver's seat, D3B comfort bunk, lower, D4T curtain, transverse in front of the bunk(s), D4Y sun blind, side, driver's side, D5F LED ambient lighting, D6G automatic climate control, D6M hot water auxiliary heater, cab, D7A thermal insulation, additional, D8N lift roof, electric, E3R power socket 24 V/25 A, co-driver's footwell, E5H switch for night driving lights, E5K switch for MirrorCam, on the bunk, E6A trailer socket 24 V, 15-pin, E6Z reversing warning, E7F cable remote control for air suspension, E9G pre-wiring for electrical equipment, F0F side module, N3 vehicle, F0T Mercedes star, illuminated, F2E floor variant, tunnel 170 mm, for storage compartment on the left, F2G cab width 2.30 m, F2W StreamSpace, F5L sun visor outside, transparent, F6C windshield tinted, F6I front mirror, heated, F6Q compressed air horn, F6T MirrorCam, F8V light sensor, F8W rain sensor, G0B powertrain, 44 t to 80 t, G0

Condition: used, Single-column hydraulic press with draw cushion RÖCHER Type REP 100.01 SZ Hydraulic deep-drawing press Machine No. 15.499 Year of manufacture 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with a drop-through hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Draw cushion force: 40 tons (400 kN) Draw cushion stroke: 200 mm Draw cushion area: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Hydraulic operating pressure: max. 300 bar Hydraulic tank capacity: 700 liters Approach speed (rapid traverse): approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Power supply: 400 Volt, 50 Hz (63 Amps) - Operation and programming via PC 670 touch panel, keyboard and mouse - Machine control via SIEMENS S7-300 PLC system - Ram stroke and press force programmable via control system - Draw cushion with drawing and ejector function - Draw cushion force infinitely adjustable - Ram and draw cushion equipped with direct linear measurement system - Draw cushion can be moved in and out under the press area, for punching work using the drop-through hole - Floor-level installation, draw cushion does not penetrate the floor - Pressure and stroke cutoff - Fixed stop with indirect measurement system - Pressure holding time infinitely programmable - Table with holes for the draw cushion ram rods - Ram with ejector - Knock-out damping - Stroke triggering via two-hand operation, foot switch, hand lever and push button on the control panel Nljdpfx Agoyupuls Ioh - LEUZE light barrier as reach-in protection for safety operation - Front mirror columns on the press table can be shifted laterally - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose connections for tool tempering or cooling at the ram - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirements (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, total length: 1,000 mm, total height: 500 mm, total width: 500 mm, overall weight: 550 kg, input voltage: 230 V, warranty duration: 12 months, input current: 16 A, electrical fuse: 16 A, feed length X-axis: 1,000 mm, feed length Y-axis: 500 mm, feed length Z-axis: 500 mm, power: 3.2 kW (4.35 HP), BigRep STUDIO G2 – Large-format industrial 3D printer | serviced | PEI | AI monitoring | 12 months support For sale is a BigRep STUDIO G2 industrial large-format FDM 3D printer from our machine inventory. The machine will not be sold in an "as is" condition without inspection. Before handover, the printer will be fully technically inspected, serviced, and prepared for production by us. Special advantage: Technical support is provided by ThinkBig3D, which has many years of BigRep service experience. I myself worked for several years as a service technician directly at the manufacturer BigRep and continue to provide professional support for BigRep systems. Included in the purchase price: BigRep STUDIO G2 Complete technical inspection and maintenance before handover PEI switch plate including magnetic base PrintShield AI-based print monitoring Machine commissioning at the buyer's location Operator and user training 12 months of technical service & support from ThinkBig3D Support for setup and production start-up Technical data Manufacturer: BigRep GmbH Model: STUDIO G2 Year of manufacture: 2019 Manufacturing process: FFF/FDM Build volume: 1,000 × 500 × 500 mm Voltage supply: 230 V Fuse rating: 16 A Power consumption: approx. 3.2 kW Machine weight: approx. 550 kg The STUDIO G2 is particularly suitable for the production of large-format prototypes, jigs, models, molds, functional parts and small series. Typical areas of application include automotive, machine and plant engineering, model and mold making, architecture, research & development, marine/boatbuilding, as well as art and design. PEI Switchplate The machine will be equipped with a PEI switchplate. This system facilitates the removal of components and provides a reliable printing surface for professional use. PrintShield – AI-based print monitoring In addition, the machine will be equipped with our self-developed PrintShield system. Using cameras and AI-based monitoring, ongoing printing processes can be monitored, and typical printing errors or anomalies can be detected. This provides additional process reliability, especially for large-format components and multi-day printing jobs. Commissioning & training included As part of the handover, training for the operating personnel will also be provided. Topics covered include machine operation, print preparation, material handling, print bed/PEI switchplate, basic process parameters, maintenance and care, troubleshooting, and the use of PrintShield. 12 months service & support The purchase price includes 12 months of technical service and support from ThinkBig3D. Nljdozz In Ajpfx Ag Ieh This ensures that the buyer has a contact person with extensive BigRep experience even after the machine handover. The machine can be inspected and demonstrated in Berlin by appointment. A test print is also possible after prior consultation. Price: €27,900 net plus statutory VAT – negotiable Sale by ThinkBig3D. Transport or delivery can be arranged upon request. Note regarding the images: Some of the product images used have been digitally retouched for better representation and may contain AI-generated content. The machine actually offered is shown in the original images. The technical specifications and described equipment features refer to the machine that is actually for sale.